Date   

NVDA commands

Gowri Sreedhar <gowrio@...>
 

Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri


Re: NVDA commands

Robert Mendoza <lowvisiontek@...>
 

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:

Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri


Re: NVDA commands

Gowri Sreedhar <gowrio@...>
 

Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)
Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri



Re: NVDA commands

Robert Mendoza <lowvisiontek@...>
 

I would assume you are using classic calculator. in the earlier version of Windows But in Windows 10 there is an addons you need to install which is Windows 10 App Essentials;


Robert Mendoza
On 3/13/2018 9:06 AM, Gowri Sreedhar wrote:

Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)

Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri




Re: NVDA commands

Gowri Sreedhar <gowrio@...>
 

We are using the default Scientific Calculator which comes along with 'Windows 10'.  Have already installed Windows 10 App Essential add-on, but does not help.
Is there any other add-on we specifically need to instal or could you suggest the keyboard strokes to access them.

Thanks

On Tue, Mar 13, 2018 at 7:29 AM, Robert Mendoza <lowvisiontek@...> wrote:

I would assume you are using classic calculator. in the earlier version of Windows But in Windows 10 there is an addons you need to install which is Windows 10 App Essentials;


Robert Mendoza
On 3/13/2018 9:06 AM, Gowri Sreedhar wrote:
Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)

Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri





Re: NVDA commands

Robert Mendoza <lowvisiontek@...>
 

oh, I see perhaps send it to nvda list instead because not been using scientific calculator lately. Apologize that is the only way I could help you with.

Robert Mendoza
On 3/15/2018 6:46 PM, Gowri Sreedhar wrote:

We are using the default Scientific Calculator which comes along with 'Windows 10'.  Have already installed Windows 10 App Essential add-on, but does not help.
Is there any other add-on we specifically need to instal or could you suggest the keyboard strokes to access them.

Thanks

On Tue, Mar 13, 2018 at 7:29 AM, Robert Mendoza <lowvisiontek@...> wrote:

I would assume you are using classic calculator. in the earlier version of Windows But in Windows 10 there is an addons you need to install which is Windows 10 App Essentials;


Robert Mendoza
On 3/13/2018 9:06 AM, Gowri Sreedhar wrote:
Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)

Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri






Re: NVDA commands

Gowri Sreedhar <gowrio@...>
 

Didn't get you (nvda list), which mail ID do I need to forward it to ?

On Fri, Mar 16, 2018 at 4:34 AM, Robert Mendoza <lowvisiontek@...> wrote:

oh, I see perhaps send it to nvda list instead because not been using scientific calculator lately. Apologize that is the only way I could help you with.

Robert Mendoza
On 3/15/2018 6:46 PM, Gowri Sreedhar wrote:
We are using the default Scientific Calculator which comes along with 'Windows 10'.  Have already installed Windows 10 App Essential add-on, but does not help.
Is there any other add-on we specifically need to instal or could you suggest the keyboard strokes to access them.

Thanks

On Tue, Mar 13, 2018 at 7:29 AM, Robert Mendoza <lowvisiontek@...> wrote:

I would assume you are using classic calculator. in the earlier version of Windows But in Windows 10 there is an addons you need to install which is Windows 10 App Essentials;


Robert Mendoza
On 3/13/2018 9:06 AM, Gowri Sreedhar wrote:
Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)

Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri







Re: NVDA commands

Robert Mendoza <lowvisiontek@...>
 

I mean you need to send it to nvda mailing address so that others from the group could help you

Robert Mendoza
On 3/16/2018 9:54 AM, Gowri Sreedhar wrote:

Didn't get you (nvda list), which mail ID do I need to forward it to ?

On Fri, Mar 16, 2018 at 4:34 AM, Robert Mendoza <lowvisiontek@...> wrote:

oh, I see perhaps send it to nvda list instead because not been using scientific calculator lately. Apologize that is the only way I could help you with.

Robert Mendoza
On 3/15/2018 6:46 PM, Gowri Sreedhar wrote:
We are using the default Scientific Calculator which comes along with 'Windows 10'.  Have already installed Windows 10 App Essential add-on, but does not help.
Is there any other add-on we specifically need to instal or could you suggest the keyboard strokes to access them.

Thanks

On Tue, Mar 13, 2018 at 7:29 AM, Robert Mendoza <lowvisiontek@...> wrote:

I would assume you are using classic calculator. in the earlier version of Windows But in Windows 10 there is an addons you need to install which is Windows 10 App Essentials;


Robert Mendoza
On 3/13/2018 9:06 AM, Gowri Sreedhar wrote:
Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)

Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri








Re: NVDA commands

Gowri Sreedhar <gowrio@...>
 

Shall do that, thanks.

On Fri, Mar 16, 2018 at 8:49 AM, Robert Mendoza <lowvisiontek@...> wrote:

I mean you need to send it to nvda mailing address so that others from the group could help you

Robert Mendoza
On 3/16/2018 9:54 AM, Gowri Sreedhar wrote:
Didn't get you (nvda list), which mail ID do I need to forward it to ?

On Fri, Mar 16, 2018 at 4:34 AM, Robert Mendoza <lowvisiontek@...> wrote:

oh, I see perhaps send it to nvda list instead because not been using scientific calculator lately. Apologize that is the only way I could help you with.

Robert Mendoza
On 3/15/2018 6:46 PM, Gowri Sreedhar wrote:
We are using the default Scientific Calculator which comes along with 'Windows 10'.  Have already installed Windows 10 App Essential add-on, but does not help.
Is there any other add-on we specifically need to instal or could you suggest the keyboard strokes to access them.

Thanks

On Tue, Mar 13, 2018 at 7:29 AM, Robert Mendoza <lowvisiontek@...> wrote:

I would assume you are using classic calculator. in the earlier version of Windows But in Windows 10 there is an addons you need to install which is Windows 10 App Essentials;


Robert Mendoza
On 3/13/2018 9:06 AM, Gowri Sreedhar wrote:
Some of the operations are not being read in V 17.4, but was reading when we used the prior version 15.4

Ctrl + P (Add to Memory), Ctrl+M(Memory store), Ctrl +R(Recall Memory), Ctrl +L (Clear Memory)

Kindly let us know if we need to install any specific add-ons?
Thanks
Gowri


On Tue, Mar 13, 2018 at 6:12 AM, Robert Mendoza <lowvisiontek@...> wrote:

There is no special keystroke command to use calculator. If you are using a full sized keyboard  I may suggest to use the numeric keypad to get work with ease.


Robert Mendoza
On 3/12/2018 9:16 PM, Gowri Sreedhar wrote:
Hi,
Can you please forward the commands to operate 'Calculator' using NVDA 17.4
Thanks
Gowri









NVDA Chat Subgroup

 

It's somewhat secondary to the way Groups.io is organized that subgroups have a tendency to "disappear."  But they're still there.

For those who really wish to chat via a list, anyone who is a member of the NVDA group can subscribe to the chat subgroup.  Here are the addresses:


I'm new to this group

molly the blind tech lover
 

Hey.

My name’s Molly.

I’m new to this group. I love  NVDA.  


Re: I'm new to this group

Chris Shook
 

I Molly,


Re: I'm new to this group

molly the blind tech lover
 

Hey 😀

-----Original Message-----
From: chat@nvda.groups.io <chat@nvda.groups.io> On Behalf Of Chris Shook
Sent: Wednesday, February 13, 2019 12:41 PM
To: chat@nvda.groups.io
Subject: Re: [chat] I'm new to this group

I Molly,


Re: I'm new to this group

Kwork
 

Well, Molly, if you love NVDA, you're in the wrong group. Hahahaha.

Just kidding of course. Well, maybe? LOL!

Travis

On 2/13/2019 10:33 AM, molly the blind tech lover wrote:

Hey.

My name’s Molly.

I’m new to this group. I love  NVDA.  


Re: I'm new to this group

molly the blind tech lover
 

Hey 😀 I also love Ariana Grande but don’t worry, I won’t talk about that lol. I want to get better about staying on topic. Strictly about NVDA 😉….

 

From: chat@nvda.groups.io <chat@nvda.groups.io> On Behalf Of Kwork
Sent: Wednesday, February 13, 2019 12:45 PM
To: chat@nvda.groups.io
Subject: Re: [chat] I'm new to this group

 

Well, Molly, if you love NVDA, you're in the wrong group. Hahahaha.

Just kidding of course. Well, maybe? LOL!

Travis

On 2/13/2019 10:33 AM, molly the blind tech lover wrote:

Hey.

My name’s Molly.

I’m new to this group. I love  NVDA.  


Re: I'm new to this group

Chris Shook
 

At least you don't like Ozzy Osborn.


Re: I'm new to this group

Kwork
 

Since this is the chat group, I think you're ok talking about what else excites you.

On 2/13/2019 10:48 AM, molly the blind tech lover wrote:

Hey 😀 I also love Ariana Grande but don’t worry, I won’t talk about that lol. I want to get better about staying on topic. Strictly about NVDA 😉….

 

From: chat@nvda.groups.io <chat@nvda.groups.io> On Behalf Of Kwork
Sent: Wednesday, February 13, 2019 12:45 PM
To: chat@nvda.groups.io
Subject: Re: [chat] I'm new to this group

 

Well, Molly, if you love NVDA, you're in the wrong group. Hahahaha.

Just kidding of course. Well, maybe? LOL!

Travis

On 2/13/2019 10:33 AM, molly the blind tech lover wrote:

Hey.

My name’s Molly.

I’m new to this group. I love  NVDA.  


Re: I'm new to this group

Kwork
 

Who knows. Maybe she does, and that there's a hidden headbanger hiding amongst us in plain sight. LOL

On 2/13/2019 10:51 AM, Chris Shook wrote:
At least you don't like Ozzy Osborn.


.


Hey, I'm here too!

 

Hey folks.
Subject says it all. I'm here :)
--

Cheers,
Marcio
Follow me on Twitter


Re: I'm new to this group

molly the blind tech lover
 

Nope Ariana Grande fan for life 😀

-----Original Message-----
From: chat@nvda.groups.io <chat@nvda.groups.io> On Behalf Of Chris Shook
Sent: Wednesday, February 13, 2019 12:52 PM
To: chat@nvda.groups.io
Subject: Re: [chat] I'm new to this group

At least you don't like Ozzy Osborn.