Re: strange problem


Quentin Christensen
 

NVDA+P will let you change the punctuation level on the fly (without needing to go into the voice settings.  The procedure that Gene offered certainly works too.

Regards

Quentin.

On Wed, Jun 14, 2017 at 7:58 PM, Gene <gsasner@...> wrote:
control NVDA key v.  Then tab to the punctuation settings and set them to none.  Then tab to and activate the ok button.  Once you want to return the punctuation settings to what they were before, either do the same thing again and change them back or use the command control NVDA r.  When you do this, you will hear, configuration applied and the settings from your permanently saved settings will again be used.
 
What I said earlier is that you said that control NVDA s and control NVDA key v didn't work.  You then said that someone told you to use the same commands and they work.  I don't know what you meant to say.  I mentioned it in a previous message because I couldn't tell if you understood what commands to use since you wrote the same commands when you said they didn't work and that they did.
 
Gene
----- Original Message -----
Sent: Wednesday, June 14, 2017 4:33 AM
Subject: Re: [nvda] strange problem

Hi gene

 

According to the tutorial the shortcut to access synthesizers is control NVDA s, and when someone else told me to press NVDA control s, it worked, and the same with the voices.

 

I’m so sorry if I wasn’t very clear in my previous email.

 

But I must admit that you were, and still are of a great help for me and support with the info you have sent me.

 

If I may asking you again, is there a way of how to turn off something for a shorttime in NVDA to stop reading such as comas, dots and many others, when I’m listening to a tutorial?

 

Because they don’t lent me concentrate enough.

 

Many thanks once again for your help and sorry for the trouble I’m giving you.

 

Kindest regards

 

Anthony     

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: 13 June 2017 21:20
To: nvda@nvda.groups.io
Subject: Re: [nvda] strange problem

 

You gave exactly the same commands when you said they didn't work and that they did work.

 

Gene

----- Original Message -----

From: anthony borg

Sent: Tuesday, June 13, 2017 1:55 PM

Subject: Re: [nvda] strange problem

 

Hi gene

I tried to use those shortcuts control nvda s, and control nvda v, but they didn’t work.

Then somebody else sent me another form, for synthesizers I have to press control nvda s, for voices I should use control nvda v, and they worked that way.

Kindest regards

Anthony

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: 13 June 2017 14:58
To: nvda@nvda.groups.io
Subject: Re: [nvda] strange problem

 

Do you understand that all commands such as control NVDA key s and Control NVDA key v are used without going into the menus?  You can get to the same settings in the menus but such commands are shortcuts that bypass the menus.  You can use them anywhere.  You aren't in NVDA when you use them.  You could be on the desktop, in a program, almost anywhere. 

 

In the menus, you would get to such settings by opening the menus, then down arrowing to preferences and pressing enter.  Then down arrow to either synthesizer and press enter or voice settings and press enter.  It sounds as though you would save yourself a lot of time and trouble by working with a good NVDA tutorial such as the one I sent a link to a number of days ago. 

 

Gene

----- Original Message -----

From: anthony borg

Sent: Tuesday, June 13, 2017 7:31 AM

Subject: Re: [nvda] strange problem

 

Hi rosemarie

 

I’m so sorry for the trouble I might have given you, but just to let you know that finally I managed to find out what was the problem.

 

Last time I went in to the menu, I entert the in put section and I pressed the space bar on the first item without knowing what was going to happen,

 

That’s why I couldn’t access the synthesizers.

 

Thanks once again for your help.

 

Kindest regards

 

Anthony    

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Rosemarie Chavarria
Sent: 13 June 2017 00:47
To: nvda@nvda.groups.io
Subject: Re: [nvda] strange problem

 

Hello, Anthony,

 

NVDA control S is what you hit to go to a different synthesizer. NVDA control V is what you hit forchanging the voice.

 

Hope this helps.

 

Rosemarie

 

 

On 6/12/2017 1:35 PM, anthony borg wrote:

Hello all

 

I tried to access the synthizer  area to change the voice, but only the microsofft platform is showing me.

 

Also evrytime I tried the command control key plus NVDA plus v, nothing happens.

 

Can somebody please explain to me what I should to correct this problem?

 

Thanks in advance

 

Anthony

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Moore
Sent: 12 June 2017 09:40
To: nvda@nvda.groups.io
Subject: strange problem

 

Hi,

I have had those experiences many times! LOL! I just mark it up as a beautiful freeky thing. I could tell you things like that all day LOL!

David Moore

Sent from Mail for Windows 10

 

From: Christopher-Mark Gilland
Sent: Sunday, June 11, 2017 8:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Go figure! You guys are not going to believe this one!

 

Yeah, no? kidding! I'm at a loss.

---
Christopher Gilland
Co-founder of Genuine Safe Haven Ministries

 

----- Original Message -----

Sent: Sunday, June 11, 2017 8:04 PM

Subject: Re: [nvda] Go figure! You guys are not going to believe this one!

 

Hi, Chris,

That's wild! I don't know what made the insert key work correctly but I'm
glad it's fine now.

Rosemarie



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Christopher-Mark Gilland
Sent: Sunday, June 11, 2017 4:47 PM
To: nvda@nvda.groups.io
Subject: [nvda] Go figure! You guys are not going to believe this one!

Hello guys.

You're not going to believe this one!

I woke up this morning, started up nvda, and all of a sudden, my insert key
on the numpad started working correctly. Would you believe it.

I wonder what in the world caused it to all of a sudden start working?

Does anyone happen to know?

This is just getting more weird by the minute!

Thanks.

Chris.



 

 




--
Quentin Christensen
Training and Support Manager

Basic Training for NVDA & Microsoft Word with NVDA E-Books now available: http://www.nvaccess.org/shop/

www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

Join nvda@nvda.groups.io to automatically receive all group messages.