Re: screen review commands not working for me


Brice Mijares
 

Yes Gene, I saw it. Thanks for the info.

On 12/9/2017 7:19 AM, Gene wrote:
I believe you'll see it in a later message. If not, let me know.
Gene
----- Original Message -----
*From:* Brice Mijares <mailto:bricemijares@...>
*Sent:* Saturday, December 09, 2017 8:46 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] screen review commands not working for me
Jean, Would you please provide the tutorial link again, I can't locate
it. Thank You.
On 12/8/2017 5:55 PM, Gene wrote:
> Unless you really like manuals, and even if you do, I hope you seriously
> consider using the tutorial I linked to yesterday or another one. I
> haven't looked at any of the tutorials to any extent but I've talked
> with a number of people, all of them experienced Windows users and they
> all found the manual to be not very helpful on this subject.  it's
> typical dry manual writing.  Demonstration would, in my opinion for most
> people, be much more useful and clear.
> Gene
> ----- Original Message -----
> *From:* Brice Mijares <mailto:bricemijares@...>
> *Sent:* Friday, December 08, 2017 4:38 PM
> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<mailto:nvda@nvda.groups.io>
> *Subject:* Re: [nvda] screen review commands not working for me
>
> I need to read the help manual to get a better understanding of these
> modes. I think I'm confusing myself by using the up and down arrow keys
> to look at a line, then use the numpad 8 to see if I'm on that line.
> ETC. Thanks for the help.
>
> On 12/8/2017 12:38 PM, Gene wrote:
>  > you must be in object navigation mode for these commands to work as
>  > described in the section of the tutorial being worked with
>  > Gene
>  > *From:* Gene New Zealand <mailto:hurrikennyandopo@...>
> > *Sent:* Friday, December 08, 2017 2:19 PM
>  > *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<mailto:nvda@nvda.groups.io>
> <mailto:nvda@nvda.groups.io>
> > *Subject:* Re: [nvda] screen review commands not working for me
>  >
>  > Hi
>  >
> >
>  > could i ask in what program are you trying to do it in?
>  >
>  >
>  > On a desktop computer to go into screen review is the nvda key + 7 on
>  > the numeric keypad.
>  >
>  >
> >
>  > The commands given are review text or text review commands you can use
>  > with screen review.
> >
>  >
>  > Depending what you are trying to do you may need to route the mouse to
>  > that position? or activate a button with a object navigation command.
>  >
> >
>  > Make sure also your num lock key is turned off.
>  >
>  >
>  > the other thing to is on the numeric keypad we can use screen review
>  > press the nvda key + 7 to go into that mode.
>  >
>  > Using the nvda key + 1 on the numeric keypad will take you down the
>  > modes like document review I think it is called and object navigation.
>  >
>  > the document review mode may only show in some applications. if it
can.
>  >
> >
>  > using the nvda key + 7 will take you back through the modes if there
>  > this may change in each application to what it reveals.
>  >
>  >
>  > Gene nz
>  >
>  >
>  > On 12/9/2017 8:20 AM, Brice Mijares wrote:
>  >> When I hit numpad 8 to read current line, it reads a completely
>  >> different line. Same with previous line, word or character ETC. The
>  >> tutorial was called getting started with NVDA.
>  >>
> >> On 12/8/2017 10:50 AM, Gene wrote:
>  >>> What do you mean when you say they don't work? Assuming the commands
> >>> are doing something, what are they doing?
> >>> Gene
>  >>> ----- original Message -----
>  >>> *From:* Brice Mijares <mailto:bricemijares@...>
> >>> *Sent:* Friday, December 08, 2017 12:45 PM
> >>> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<mailto:nvda@nvda.groups.io>
> <mailto:nvda@nvda.groups.io>
> >>> *Subject:* [nvda] screen review commands not working for me
>  >>>
>  >>> I've been trying to follow the following directions, but these
>  >>> directions are not working for me. I made sure I was in desktop
layout.
> >>> It was a brief tutorial by Joseph Lee and I had copied it to
> wordpad and
>  >>> was trying to use the numpad keys to read it.
>  >>>
>  >>> Screen review commands
>  >>> Note the pattern as I give these commands:
>  >>> Read previous line, numpad 7.
> >>> Read current line, numpad 8.
>  >>> Read next line, numpad nine.
>  >>> You move in screen review to the previous or next line when you
issue
>  >>> those commands. You can keep moving and reading until you get to
> the top
> >>> or bottom of the screen.
>  >>> Read previous word, numpad 4.
>  >>> Read current word, numpad 5.
>  >>> Read next word, numpad 6.
> >>> Read previous character, numpad 1.
>  >>> Read current character, numpad 2.
>  >>> Read next character, numpad 3.
>  >>> Note the pattern:
> >>>
>  >>> Thanks for any suggestions.
>  >>>
>  >>>
> >>>
>  >>
>  >>
> >>
>  >
>  > --
>  > Image NVDA certified expert
>  > Check out my website for NVDA tutorials and other blindness related
>  > material at http://www.accessibilitycentral.net Regardless of
where you
>  > are in New Zealand if you are near one of the APNK sites you can use a
>  > copy of the NVDA screen reader on one of their computers. To find out
>  > which locations (or location) is near to you please visit
>  > http://www.aotearoapeoplesnetwork.org/content/partner-libraries
> > (Aotearoa People's Network Kaharoa). To find an NVDA certified expert
>  > near you, please visit the following link
>  > https://certification.nvaccess.org/. The certification page
contains the
>  > official list of NVDA certified individuals from around the world, who
>  > have sat and successfully passed the NVDA expert exam.
>  >
>
>
>

Join nvda@nvda.groups.io to automatically receive all group messages.