browser question for NVDA

Kerryn Gunness <k_gunness@...>

hi all
i am using firefox ESR
with NVDA
NVDA reads everything together on a website
when i am on a website, NVDA says remove cluster to read the text, how do i do this?

----- Original Message -----
From: "Shaun Everiss" <sm.everiss@...>
To: <>
Sent: Saturday, March 3, 2018 10:27 PM
Subject: Re: Adjusting Microsoft voices (was RE: [nvda] Giving up on CodeFactory voices in NVDA)

Headsets don't usualy have drivers they work off generic drivers or something some do have drivers but the interfaces don't work with access the drivers do.

On 4/03/2018 5:04 a.m., Melissa Jean wrote:
I wanted a headset. I also in particular about how to wear this headset--I prefer behind the head. I used my jaws trial and it did not do the same things that my synthesizer for NVDA did. I have 30 days left still to either get used to it or choose a different set. I might try and find the same model but using just a regular plug-in. I think I might look into getting eloquence--I'm hoping the other version that is not the ad on version works better. Thank you for taking the time to give me some opinions.

On Mar 3, 2018, at 6:37 AM, Gene <gsasner@...> wrote:

You might do better, and it would be simplir and perhaps cheaper, to get a simple pair of headphones you plug into the output jack of a sound card. Just regular headphones that you can use with any standard output jack. Many times, settings, if they are available to change bass and trebble are inaccessible in sound card software. Just getting a cheap pair of headphones might be the best solution. For convenience, you could get an extension cable with a volume knob so you can leave the computer volume setting the same.

If you want headphones for serious music listening you could get good standard headphones or good USB headphones but just for screen-reader use, just a cheap pair, maybe ten or fifteen U.S. dollars, might be fine. I haven't listened to really cheap headphones so you might want to spend a little more. If there is a store near you where you can buy headphones and it has a good return policy, that would allow you to return them more conveniently than by shipping them back somewhere.

----- Original Message -----
From: Melissa Jean
Sent: Saturday, March 03, 2018 5:35 AM
Subject: Re: Adjusting Microsoft voices (was RE: [nvda] Giving up on CodeFactory voices in NVDA)

Yes, these are USB headphones. I have gone through the sound setting to see if I can adjust them separately since they are basically their own sound card, but I have not been able to find something that would change the amount of base it is putting out.


On Mar 3, 2018, at 12:59 AM, Gene <gsasner@...> wrote:

Are you using USB speakers and a USB headphone as well?

----- Original Message -----
From: Melissa Jean
Sent: Friday, March 02, 2018 9:21 PM
Subject: Re: Adjusting Microsoft voices (was RE: [nvda] Giving up on CodeFactory voices in NVDA)

I figured it out. It helped to use the JAWS trial I had to do it. It
picks up more than NVDA does.
However the voices are ... odd. I'm hearing another voice when I'm
typing and don't know what it is. It is a tad laggy when it comes to
my typing.
Oh, well... I will have to figure it out or get a newer headset,
lol.This new one has a lot of bass to it that I can't turn off. It
also clips off the first letter of most lines, words, and button for
some reason when I use the add that shall not be named which is why I
looked into this again.

Thanks for your help, appreciate it.

On 3/2/18, JM Casey <crystallogic@...> wrote:
Hey again.

Yes, now that you mention it, I remember that list box where you have to
select being somewhat too silent with NVDA. I think I had better luck with
JAWS 18, which I also have on this computer. I think I'll try playing with
it again and see exactly what happens. This is something that NVDA users
should certainly be able to do without trouble.

I did not download that .exe file. It seemed like a better idea to just use
the Windows interface to do this. I think the source is trustworthy but I'm
not positive, and you'd have to give the program admin rights to muck about
with your file permissions, so I dunno.

The good news is that Windows actually comes with a take ownership utility.
It's called takeown.exe and I didn't know about it until recently. The bad
news (possibly) is that it's command line only, so you'll have to get the
syntax right and everything. You'd have to run in command prompt,
administrator, or in powershell. I took a quick look at the usage info with
"takeown /?" and, maybe because it's Friday evening and my brain is fried
trying to apply to jobs, but as of now I can't make head nor tail of it. If
you're familiar with Windows command line applications though, this could be
a no-brainer for you. It's been a long time since I had to tinker much with
such things.

-----Original Message-----
From: [] On Behalf Of Melissa
Sent: March 2, 2018 5:48 PM
Subject: Re: Adjusting Microsoft voices (was RE: [nvda] Giving up on
CodeFactory voices in NVDA)

Thanks for that. I got most of it, but I guess I had been missing something
when I was trying.
Have you tried using the take ownership exe they suggested? I admit that I
wanted to try that because I'm having trouble selecting things while going
through the properties/security window.

On 3/2/18, JM Casey <crystallogic@...> wrote:
Hey Melissa.

Rather than try to duplicate what I did before, I'm just going to
paste this URL for you. If you follow these instructions, I'm 99% sure
you will be able to get it to work.

-----Original Message-----
From: [] On Behalf Of
Melissa Jean
Sent: March 2, 2018 2:52 PM
Subject: Re: Adjusting Microsoft voices (was RE: [nvda] Giving up on
CodeFactory voices in NVDA)

Sorry for being late to reply to this email. I got a new headset and
it doesn't seem to be playing well with the synth I am using and
wanted to use the microsoft voices.... I went to edit the ini file and
of course it did not work. I went into the properties and I can't seem
to find a way to give full access or write permissions to at least
administrator so that I can save the changes I made to the ini file.
Anyone have an idea as to how or what I should do to edit this please?

Thanks much
On 2/20/18, JM Casey <crystallogic@...> wrote:

I don't mind adjusting an ini file, so long as MS doesn't keep
mucking with it when there's an update. But yes, being able to put it
in one's user data location would certainly be nice. And I do not
know if this can be done at all. Anyone?

-----Original Message-----
From: [] On Behalf Of
Cohn, Jonathan
Sent: February 20, 2018 10:25 AM
Subject: Re: Adjusting Microsoft voices (was RE: [nvda] Giving up on
CodeFactory voices in NVDA)

Is there perhaps a user specific location to place this ini file?
Certainly in other OS there are both global and user specific setings

Also sure would be nice if there was a settings panel for adjusting
these rather than the ini file.

Best Wishes,

Jonathan Cohn
gs panel for adjusting these rather than the ini file.

Best Wishes,

Jonathan Cohn

´╗┐On 2/19/18, 4:17 PM, " on behalf of JM Casey"
< on behalf of crystallogic@...> wrote:

Hi Melissa.

Yes, you can use notepad to edit the file. It's not enough to run
notepad as administrator, though, assuming you are using Windows 10
at least. You will have to grant yourself permission to change the
file by taking ownership of it using the attributes in the properties
dialog. To be honest, I don't 100% understand how ownership rites in
Windows 10 function.
I got it to work, but it took quite a bit of experimenting, which is
the reason I was particularly annoyed by Microsoft changing it back
Essentially, you want to grant yourself "full control" of this
particular file, which means you have permission to edit it.

Where exactly the file is depends on what you are
using....whether you are using an older SAPI voice or the newer Core1
voices? Each voice has its own ini. The file I edited was at this path
And as it's the David voice I've been using, the name is:

The lines you are looking ror are these two:

I do not remember what the original values were at the moment,
but I believe it's in milliseconds or something. I altered the
sentence boundary to 350 and that seems a lot better to me, though
you may prefer less of a pause. Play around and see what you get and
what you like.

If you get stuck with the file attributes thing, there are
resources on the internet that can help you. Someone else on the list
may understand this better than I do. It's one of those things which
I thought I was familiar with, but trying to edit a Windows ini file
showed me that in fact I'm still unclear on how this totally works.
Still, at least I got it to do what I wanted it to.

-----Original Message-----
From: [] On Behalf
Of Melissa Jean
Sent: February 19, 2018 3:44 PM
Subject: Re: [nvda] Giving up on CodeFactory voices in NVDA

This licensing process is one reason I haven't made this purchase.
I'd love to be able to have something easy to work and not to worry
about if it will stop working or not after I made some update.

I'd be interested in using David--the pauses are what turn me off
from doing so though. I thought I remembered hearing updating the ini
file before, but can't find the email though I saved it.

What is the file? Where is it found? Where is the line found to
edit this?Can one use notepad to edit the file?
Sorry for the barrage of questions.

Thank you
On 2/19/18, JM Casey <crystallogic@...> wrote:
> I use David and I'm ok with him. Only thing is, I at least

> have to adjust the ini file that dictates how long he pauses
> sentences, or even comma clauses. A two second wait after a
period is

> completely intolerable from a speech synthesiser. Still, at
least you can adjust it.
> Only, Microsoft, when doing Windows updates, has altered it
> original setting at least three times now, and I've had to
change it
> back.
> -----Original Message-----
> From: [] On
> Rosemarie Chavarria
> Sent: February 19, 2018 12:14 PM
> To:
> Subject: Re: [nvda] Giving up on CodeFactory voices in NVDA
> Hi, David,
> Microsoft David's pretty good. I like the Mark voice too.
> Rosemarie
> -----Original Message-----
> From: [] On
> James Robinson
> Sent: Monday, February 19, 2018 9:06 AM
> To:
> Cc:;
> Subject: [nvda] Giving up on CodeFactory voices in NVDA
> Hello!
> You know, I have had it with this CodeFactory thing of
> constantly. I checked out one of the Microsoft voices they
> NVDA and this voice is not too bad; it is not as clear as
Eloquence or

> the Vocalizer Expressive voices, but it is a little better
> standard NVDA voice in my opinion. I think CodeFactory could
> this program permanent with NVDA as it is with other screen
> They end up making the program far too much trouble to use in
> than it is worth. I'll just eat the cost because I don't
expect them

> to do anything about the crazy requirements for using the
> I'll thkink twice before I purchase such software in the
> Can we use any other Microsoft voices that windows offers?
so, how

> do we do it?
> James Robinson

Join to automatically receive all group messages.