Re: NVDA and SecureCRT or other ssh clients for Windows


Ralf Kefferpuetz
 

Yup, you're right!

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Noelia Ruiz
Sent: Mittwoch, 20. Juni 2018 14:50
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and SecureCRT or other ssh clients for Windows

No, the equal is needed to assign an integer value to the configuration parameter.
You can test it in the Python console and without equal you'll get a syntax error.

Cheers

2018-06-20 14:44 GMT+02:00, Ralf Kefferpuetz
<ralf.kefferpuetz@elra-consulting.de>:
Shouldn't it be: config.conf["editableText"]["caretMoveTimeout"]Ms ?


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Noelia
Ruiz
Sent: Mittwoch, 20. Juni 2018 13:52
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and SecureCRT or other ssh clients for
Windows

Hi, I don't use the program you're mentioning, just git bash.
Anyway, you may want to see this issue:
https://github.com/nvaccess/nvda/issues/4481

You can try to configure timeout, for example, following these steps:

1. Go to the application where you find issues.
2. Create a new profile for this application (or manual, in case you
don't want it's triggered automatically).
3. Activate it so you can save configuration changes just for this profile.
4. Open the Python console (control+NVDA+z) and type the following
lines (you can paste each line and press Enter):
import config
config.conf["editableText"]["caretMoveTimeout"] = 100
config.conf.save()

(change 100 for a value in milliseconds) and test with different values.

Cheers



2018-06-20 10:55 GMT+02:00, Christian Schoepplein <chris@schoeppi.net>:
Hej,

I need to work via ssh on linux servers in my job. In the past I used
Linux on my workstation, but now I have to use Windows. Now I am
looking for a Windows ssh client which is good to use with NVDA.

The prefered client for my employer is SecureCRT. I've configured
this client by following the steps described here:

https://www.vandyke.com/support/tips/scrnread.html

This setup is working well, only one thing is causing me problems.

When navigating through the output of a command given in the shell
the focus of NVDA is always getting back to the line where the cursor
is located after one second or so. This makes it inpossible to read
through a shell window.

Does anyone know this issue and can it be solved somehow?


I also tested putty and cygwinssh. Cygwinssh seems to work fine, but
it has not that many features. Also I was not able to scrol back in a
shell output. Putty is OK in most cases, but sometimes the focus gets
lost or is shifted for a line or two.

Maybe someone is using SecureCRT also and can help me out with my
little problem, then it will be a good solution for me and my
employer I think.

TIA and all the best from Munich,

Schoepp












Join nvda@nvda.groups.io to automatically receive all group messages.