Re: espeak n g no good it sneezes on some words


Bhavya shah
 

Hi all,
Just quickly chiming in - I am using ESpeak NG very comfortably and
alike ESpeak with the following voice configurations:
Variants: Steph/Steph_test 1/Steph 2/Steph 3 (mostly similar)
Speech Rate: 40% with rate boost enabled, though I prefer reading
important or academic notes at 30% with rate boost enabled, but can go
up to 50% or so in places (such as a fast paced game) with whose text
messages I am acquainted or familiar to some extent already, or if
necessary
Pitch: 40
Inflection: 50
I first heard ESpeak's Max variant voice close to three years ago, and
began using it and NVDA full time almost two years ago, and my above
speech settings have been going on since a year perhaps. I hope to
build my listening speed too to compete with Jamie and others at some
point in time in the future, as Jamie uses ESpeak's Max at 55% with
rate boost enabled always, as I am informed through some of his public
interviews/podcasts. :D grin
Back to the topic though, I have found not even the subtlest of
annoyances with ESpeak NG, perhaps I find it a tad bit more
responsive, could be a misconception though, as ESpeak already was
incredibly responsive.
Thanks.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:

My first experience with a screen reader and a synthesizer was with
the apple 2 c running dos 3.3 and using textalker screenreader with an
echo synthesizer. The echo synth was fast enough at the time. The next
computer was a x t clone with 570 k ram and 40 megibite hard drive using
an old speech master board with some scripts to read things on the
screen. Clunky and slow. It was using dos. Next windows 95 came along
and I used webspeak in it for a while along with tinytalk and seekline
in dos with nettamer. Things got better with an old accent p c i s a
synth I was given and started using provox in dos.

Pete


On 6/10/2016 6:56 AM, Lenron wrote:
I can maybe understand nvda reading at 85 or 90 don't mean I wish to
read that fast. I normally keep it in the 70 to 75 range. ESpeak
sounds horrible to me.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:
Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away
set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of
nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word
stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to
100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.








--
Warm Regards
Bhavya Shah
Using NVDA (Non Visual Desktop Access) free and open source screen
reader for Microsoft Windows
To download a copy of the free screen reader NVDA, please visit
http://www.nvaccess.org/
Using Google Talkback on Motorolla G second generation Lollipop 5.0.2
Reach me through the following means:
Mobile: +91 7506221750
E-mail id: bhavya.shah125@gmail.com
Skype id : bhavya.09

Join nvda@nvda.groups.io to automatically receive all group messages.