Web surfing has become quite standardized among popular
screen-readers. If you already know how to surf with JAWS, you will find
some instances where something is different, but almost everything is either
the same or very similar. In other words, you can do most or almost all
you did in NVDA working with web sites as you could with JAWS without reading
If you are a new user of NVDA and you have not tried surfing any websites
the section in the user manual you will need to see is called browse mode it
is section 6 also single letter navigation section 6.1 and the elements list
6.2 Plus I would start off with a easier type of website to navigate to get a
idea of how they are layed out.
Those sections are found in the user manual use the nvda key + letter N to
bring up the nvda menus then arrow down to help, then right to user manual
then the press the enter key on that menu When the browser comes up then jump
down by letter H for headings to those sections to read them.
I noticed the servers where my website was hosted were down so you could
not access the website but seems to be up now.
The website of mine is easy to navigate you can jump around easily. the
main page is setup in a table then after you go into a web page they are long
pages but can be jumped through quickly by H for headings.
If you take a look you will know what I mean.
On 23/01/2020 3:02 am, Betsy Grenevitch
At this point there is not a particular task I am trying to do. The only
thing I would like to try to learn is how to shop on the Kroger website but
with my memory issues I am not sure I even want to tackle something like
that unless it is really simple. I will keep the link you sent for future
On 1/22/2020 5:15 AM, Gene wrote:
Are you interested in tutorials about any
specific programs? It might be something to be discussed on the chat
list, but you might get good recommendations.
Personal instruction could be discussed as
well, but it may be expensive and certain tutorials may be. Others
are not expensive or free.
----- Original Message -----
Sent: Tuesday, January 21, 2020 10:20 PM
Subject: Re: [nvda] windows 10 disk clean up
Wow! Gene, I need you as a computer teacher. I did not
even ask the
question because I totally forgot about disk clean
You wrote the steps in the way I learn and write down steps. It
to find someone to do it that specific here where I
I have copied these steps and will be trying to do this
going to bed.
Thanks so much
On 1/21/2020 10:10 PM, hurrikennyandopo ...
> press the windows key and when
the search box comes up type in disk it
> will come up with a
result called disk cleanup/ Press the enter key on
> it. It will
then come to another screen there you can pick your drive
> to do
it to it is a combo box it will usually default to c: drive. You
can use the down arrow key to go to another if you want to. What ever
> one you pick say c: drive you will then need to tab to ok button
> press the enter key. It will then calculate how much can be
> It will give you a list of areas it
can clean up and say those areas.
> There is a check box next to
each one. You can arrow down the list and
> use the space bar to
check the box.
> Down towards the bottom of the list
you will then need to tab as the
> down arrow key will not take you
any further.. If you tab once it will
> land on a system files
button I think it was called. Press the enter
> key and repeate the
process like before except this for will be for
> system files.
Then at the bottom of the list you have selected all the
> ones you
want removed you will then need to tab to the ok button then
press the enter key.
> It will then give you a
message just say yes to it and then it will
> clean it up all for
> Hope it helps.
> Do not
worry it will not remove any files only the ones you picked not
> Gene nz
> On 22/01/2020 3:35
pm, anthony borg wrote:
>> Hi folks,
anyone can explain to me how to use the windows 10 disk clean
>> Thanks in