nvda@nvda.groups.io

Home Messages Hashtags Subgroups

Expanded

Between

and

Re: quake Shaun Everiss #10404 Yes we heard about the quakes you had over there. On an interesting note shortly before our second christchurch quake the japanese had one and so yeah a lot of things going on. The only saving grace if there is ever one is that this one happened when everyone was in bed and not as the last one happened in the middle of the day at lunch hour. The only other saving grace if there is any is that my brother is a geo tech enginier and as long as we have quakes he will have a secure job. Since depending on the region we could wait 30 or so years each time a big thing happens for stabelisation then he has work. I really hope we don't get a quake here, we are close to 50 volcanoes and so there is a chance that if we do get a quake it will not be a standard one so we may survive then we get cooked and roasted to boot so yeah crazy times. On the other hand, especially with all the wars going on and the us stuff going on, the world is a bit nutty now and probably will stay that way for the next while so another quake can't make it much worse. toggle quoted message Show quoted text On 14/11/2016 11:05 p.m., Mallard wrote: I'm In Italy, and we've (and re having) our share of quakes over the last few months, with a lot of serous damage to our historical, artistic and cultural treasures. We've also ahd a few hundred human lives lost. I'm in the North, and haven't been affected by all this, but I understand how one must feel undersuch circumstances. I heard the quake was really big this time, about 8 degrees... Glad you didn't have any problems. Ciao, Ollie Il 14/11/2016 05:26, Shaun Everiss ha scritto: No thank god though some felt it and stuff was moved no dammage, nothing at all. We are inland though some what even so, I woke up with news blaring. On 14/11/2016 10:43 a.m., Mallard wrote: Hello Shaun, I didn't realise you're in New Zealand too... Glad you didn't personally suffer any losses. Blessings, Ollie Il 13/11/2016 22:30, Shaun Everiss ha scritto: 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. . .
More All Messages By This Member
Re: quake Mallard <mallard@...> #10403 I'm In Italy, and we've (and re having) our share of quakes over the last few months, with a lot of serous damage to our historical, artistic and cultural treasures. We've also ahd a few hundred human lives lost. I'm in the North, and haven't been affected by all this, but I understand how one must feel undersuch circumstances. I heard the quake was really big this time, about 8 degrees... Glad you didn't have any problems. Ciao, Ollie toggle quoted message Show quoted text Il 14/11/2016 05:26, Shaun Everiss ha scritto: No thank god though some felt it and stuff was moved no dammage, nothing at all. We are inland though some what even so, I woke up with news blaring. On 14/11/2016 10:43 a.m., Mallard wrote: Hello Shaun, I didn't realise you're in New Zealand too... Glad you didn't personally suffer any losses. Blessings, Ollie Il 13/11/2016 22:30, Shaun Everiss ha scritto: 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. . .
More All Messages By This Member
Re: Text frame Boxes MS Word 2016 Cearbhall O'Meadhra #10402 Hi, I found a macro which detects the presence of text frames or text boxes and works like a dream! I have forwarded it to the development team and asked if its logic can be used in NVDA to tackle this problem. Meanwhile, could someone tell me if it is OK to post the text of a macro on this list so that everyone can put it into their Word document as a macro? Here is the link to the article anyway: - Source: http://wordribbon.tips.net/T012249_Finding_Text_Boxes.html by Allen Wyatt (last updated May 27, 2015) All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...
More All Messages By This Member
Re: Text frame Boxes MS Word 2016 Heaven Botma <heaven@...> #10401 Hi This problem isn't exclusive to Office 2016.11.14 To our absolute frustration, we experienced the same problem in Office 2010 on Friday. You see, we asked one of our churches to send the programme for the service to us. We received the Word document, which indicated that it was the right size to contain text, however, when we opened the document, NVDA read nothing whatsoever. NVDA couldn't even do a word count or anything. What made it even more strange, was that, when we selected the text, I could see that the document wasn't blank. We tried to convert it to text in the hope that something would happen, but still nothing. So we took the document to one of our sigted colleagues, who simply clicked on the text and cut it out of the frame which made it legible with immediate effect. Kind regards Heaven Botma Dosent: Kaleidoskoop Opleidingskollege Lecturer: Kaleidoscope Training College T: 023 348 7634 C: 063 692 2573 F: 023 348 7633 E: heaven@... W: www.kaleidoscopesa.org Adderleystraat 20 Adderley Street Posbus 233 P.O. Box, Worcester, 6849 toggle quoted message Show quoted text -----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account Sent: Saturday, 12 November 2016 1:32 PM To: nvda@nvda.groups.io Subject: Re: [nvda] Text frame Boxes MS Word 2016 I've seen this as well, indeed I had to get my doctor to remove all text boxes and reformat the text as paragraphs before it would even be possible to cut and paste them or read them in a screenreader. As this was dietary information it was most important that it was readable to me. Of course the producers of these files obviously has no idea about access issues, I doubt if it even crossed their minds. Brian bglists@... Sent via blueyonder. Please address personal email to:- briang1@..., putting 'Brian Gaff' in the display name field. ----- Original Message ----- From: "Cearbhall O'Meadhra" <cearbhall.omeadhra@...> To: <nvda@nvda.groups.io> Sent: Thursday, November 10, 2016 10:37 AM Subject: [nvda] Text frame Boxes MS Word 2016 Hi, Re: GitHub REFERENCE: "elements in a word document are not read #5738" I have a Word document that contains two appendices which are set out as "Text Boxes" that NVDA calls "Text Frame" when it gets into the BOX. The only way that I can find to get into the BOX is to find A particular word that is known to be contained in the box. I see that this is a problem raised in GitHub and still unassigned. The sample given in the GitHub reference is a perfect illustration of what I mean and so you can replicate the problem from there if you wish. Has anyone found a way to navigate these boxes? I understand that the difficulty is that they can float and so it is difficult for the screen reader to lock on to them. As a matter of interest, I copied the entire document, including the two appendices, into clipboard in hopes of removing the text frames but the Windows "cut and paste" also failed to trap the contents of the text boxes! I had a sighted person do the same on their machine, and they were surprised to find that the contents of the text boxes, which they could see clearly in the Word document, failed to paste into their notepad session! Any thoughts would be more than welcome. All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...
More All Messages By This Member
Re: quake Shaun Everiss #10400 No thank god though some felt it and stuff was moved no dammage, nothing at all. We are inland though some what even so, I woke up with news blaring. toggle quoted message Show quoted text On 14/11/2016 10:43 a.m., Mallard wrote: Hello Shaun, I didn't realise you're in New Zealand too... Glad you didn't personally suffer any losses. Blessings, Ollie Il 13/11/2016 22:30, Shaun Everiss ha scritto: 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. . .
More All Messages By This Member
Re: quake Shaun Everiss #10399 Thanks for that. Some of us locally felt the quake and had stuff move, nothing much happened, and I heard nothing, but it was nation wide probably 2 quakes at once triggered it. It will take a while to find out what went and what will go though toggle quoted message Show quoted text On 14/11/2016 11:04 a.m., Sharni-Lee Ward wrote: I heard about this quake this morning on the news. My prayers go out to all of you, especially those who suffered losses of any kind from the earthquake a few years ago, and I hope your families are all okay. On 14/11/2016 8:43 AM, Mallard wrote: Hello Shaun, I didn't realise you're in New Zealand too... Glad you didn't personally suffer any losses. Blessings, Ollie Il 13/11/2016 22:30, Shaun Everiss ha scritto: 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. .
More All Messages By This Member
Re: quake Arlene #10398 Oh no, I'm glad you're all right. Hope no one suffered any damages. toggle quoted message Show quoted text -----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New Zealand Sent: November-13-16 11:53 AM To: nvda@nvda.groups.io Subject: Re: [nvda] quake Hi It was a 7.5 or 7.6 earth quake. We felt it up here where we live in taranaki strong as. The whole house was swaying from side to side i guess for at least a minute. It was like pretty freaky It is all over the news papers now and on social media. More can be read at the stuff website at http://www.stuff.co.nz Gene nz On 14/11/2016 8:18 AM, Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
Re: NVDA unable to focus when I launch word 2016 Pranav Lal #10397 Hi Brian, I have disabled all add-ons, reset to factory defaults and have had no success. I did try opening word in safe mode but had no success. I am able to use outlook 2016 without problems. Pranav toggle quoted message Show quoted text -----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account Sent: Sunday, November 13, 2016 3:31 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA unable to focus when I launch word 2016 So does it work when you suspend the add ons mentioned in the log then? I have to say, I chucked out easy table navigator as it was slowing the use of some programs when it came to a table. Brian bglists@... Sent via blueyonder. Please address personal email to:- briang1@..., putting 'Brian Gaff' in the display name field. ----- Original Message ----- From: "Pranav Lal" <pranav.lal@...> To: <nvda@nvda.groups.io> Sent: Sunday, November 13, 2016 6:26 AM Subject: Re: [nvda] NVDA unable to focus when I launch word 2016 I now have log dumps of what happens when I try to get focus to word 2016. ERROR - eventHandler.executeEvent (11:49:10): error executing event: gainFocus on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\__i nit__.py", line 338, in event_gainFocus File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 75, in event_gainFocus File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 64, in tableNavAvailable File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 26, in _MSWordTableNavAvailable File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 526, in __init__ AttributeError: 'NoneType' object has no attribute 'range' ERROR - eventHandler.executeEvent (11:49:10): error executing event: caret on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "NVDAObjects\IAccessible\__init__.pyo", line 1280, in event_caret File "NVDAObjects\window\winword.pyo", line 1036, in event_caret File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 524, in __init__ AttributeError: 'NoneType' object has no attribute 'range' INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:49:10): Using Eloquence version 6.1.0.0 INFO - synthDriverHandler.setSynth (11:49:10): Loaded synthDriver eloquence IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):windows+r IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Run dialog Type the name of a program, folder, document, or Internet resource, and Windows will open it for you.'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Open: combo box collapsed'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'edit Alt+o'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:03): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:03): Adding generator 13 DEBUG - queueHandler.pumpAll (11:50:03): generator 13 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):i IO - speech._speakSpellingGen (11:50:04): Speaking character u'i' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 14 DEBUG - queueHandler.pumpAll (11:50:04): generator 14 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):n IO - speech._speakSpellingGen (11:50:04): Speaking character u'n' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 15 DEBUG - queueHandler.pumpAll (11:50:04): generator 15 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:04): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 16 DEBUG - queueHandler.pumpAll (11:50:04): generator 16 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):o IO - speech._speakSpellingGen (11:50:04): Speaking character u'o' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 17 DEBUG - queueHandler.pumpAll (11:50:04): generator 17 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):r IO - speech._speakSpellingGen (11:50:04): Speaking character u'r' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 18 DEBUG - queueHandler.pumpAll (11:50:04): generator 18 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):d IO - speech._speakSpellingGen (11:50:04): Speaking character u'd' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 19 DEBUG - queueHandler.pumpAll (11:50:04): generator 19 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):enter IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] DEBUGWARNING - RPC process 14256 (WINWORD.EXE) (11:50:05): Thread 10272, build\x86\remote\ia2Support.cpp, installIA2Support, 86: Error registering class object, code -2147221008 INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:05): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:05): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:05): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:05): Loaded synthDriver eloquence IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Opening - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:21): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:21): oleacc.AccessibleObjectFromEvent with window 263746, objectID 5 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:22): Input: kb(desktop):t DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 45 and childID 0: [Error -2147467259] Unspecified error DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 47 and childID 0: [Error -2147467259] Unspecified error IO - speech._speakSpellingGen (11:50:22): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:22): Adding generator 20 DEBUG - queueHandler.pumpAll (11:50:22): generator 20 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):rightArrow IO - speech._speakSpellingGen (11:50:23): Speaking character u'line feed' DEBUG - queueHandler.registerGeneratorObject (11:50:23): Adding generator 21 DEBUG - queueHandler.pumpAll (11:50:23): generator 21 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):upArrow IO - speech.speak (11:50:23): Speaking [LangChangeCommand ('en_US'), u't'] IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):a IO - speech._speakSpellingGen (11:50:24): Speaking character u'a' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 22 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 83 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 22 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 23 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 86 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 23 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):e IO - speech._speakSpellingGen (11:50:24): Speaking character u'e' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 24 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 89 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 24 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):s IO - speech._speakSpellingGen (11:50:24): Speaking character u's' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 25 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 92 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 25 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 26 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 95 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 26 finished IO - inputCore.InputManager.executeGesture (11:50:26): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:26): oleacc.AccessibleObjectFromEvent with window 263746, objectID 96 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):alt+space IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Restore r 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):x IO - speech._speakSpellingGen (11:50:28): Speaking character u'x' DEBUG - queueHandler.registerGeneratorObject (11:50:28): Adding generator 27 DEBUG - queueHandler.pumpAll (11:50:28): generator 27 finished IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:29): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:29): oleacc.AccessibleObjectFromEvent with window 263746, objectID 162 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:33): Input: kb(desktop):windows+m INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:34): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:34): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:34): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:34): Loaded synthDriver eloquence IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:34): Input: kb(desktop):NVDA+n IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'NVDA menu'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Exit x 13 of 13'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Donate d 11 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Save configuration s 9 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Reset configuration to factory defaults r 8 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Revert to saved configuration r 7 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Configuration profiles... c 6 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Help subMenu h'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Vocalizer subMenu v'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Tools subMenu t'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):rightArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'View log v 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:39): Input: kb(desktop):enter -----Original Message----- From: Pranav Lal [mailto:pranav.lal@...] Sent: Sunday, November 13, 2016 1:03 AM To: 'nvda@nvda.groups.io' <nvda@nvda.groups.io> Subject: NVDA unable to focus when I launch word 2016 Hi all, When I launch word 2016, NVDA freezes and says nothing. I have to quit word using the task manager. I have tried with narrator and word has started as expected. The task manager shows word running. I have tried with all add-ons disabled without success. OS=windows 10 64bit What should I do next?
More All Messages By This Member
Re: NVDA unable to focus when I launch word 2016 Pranav Lal #10396 Hi Brian, Yes eloquence is the vocalizer version but I have switched to espeak and have had the same problems. Pranav toggle quoted message Show quoted text -----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account Sent: Sunday, November 13, 2016 3:35 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA unable to focus when I launch word 2016 I assume Eloquence is the vocaliser version if you have any old versions that are not that one, best uninstall them as they cause issues. I have found viavoice original sappi4 ok but most of the hacked ones are illegal in any case. I still think the easy table navigator has some issues though. Brian bglists@... Sent via blueyonder. Please address personal email to:- briang1@..., putting 'Brian Gaff' in the display name field. ----- Original Message ----- From: "Pranav Lal" <pranav.lal@...> To: <nvda@nvda.groups.io> Sent: Sunday, November 13, 2016 6:26 AM Subject: Re: [nvda] NVDA unable to focus when I launch word 2016 I now have log dumps of what happens when I try to get focus to word 2016. ERROR - eventHandler.executeEvent (11:49:10): error executing event: gainFocus on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\__i nit__.py", line 338, in event_gainFocus File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 75, in event_gainFocus File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 64, in tableNavAvailable File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 26, in _MSWordTableNavAvailable File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 526, in __init__ AttributeError: 'NoneType' object has no attribute 'range' ERROR - eventHandler.executeEvent (11:49:10): error executing event: caret on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "NVDAObjects\IAccessible\__init__.pyo", line 1280, in event_caret File "NVDAObjects\window\winword.pyo", line 1036, in event_caret File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 524, in __init__ AttributeError: 'NoneType' object has no attribute 'range' INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:49:10): Using Eloquence version 6.1.0.0 INFO - synthDriverHandler.setSynth (11:49:10): Loaded synthDriver eloquence IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):windows+r IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Run dialog Type the name of a program, folder, document, or Internet resource, and Windows will open it for you.'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Open: combo box collapsed'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'edit Alt+o'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:03): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:03): Adding generator 13 DEBUG - queueHandler.pumpAll (11:50:03): generator 13 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):i IO - speech._speakSpellingGen (11:50:04): Speaking character u'i' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 14 DEBUG - queueHandler.pumpAll (11:50:04): generator 14 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):n IO - speech._speakSpellingGen (11:50:04): Speaking character u'n' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 15 DEBUG - queueHandler.pumpAll (11:50:04): generator 15 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:04): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 16 DEBUG - queueHandler.pumpAll (11:50:04): generator 16 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):o IO - speech._speakSpellingGen (11:50:04): Speaking character u'o' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 17 DEBUG - queueHandler.pumpAll (11:50:04): generator 17 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):r IO - speech._speakSpellingGen (11:50:04): Speaking character u'r' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 18 DEBUG - queueHandler.pumpAll (11:50:04): generator 18 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):d IO - speech._speakSpellingGen (11:50:04): Speaking character u'd' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 19 DEBUG - queueHandler.pumpAll (11:50:04): generator 19 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):enter IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] DEBUGWARNING - RPC process 14256 (WINWORD.EXE) (11:50:05): Thread 10272, build\x86\remote\ia2Support.cpp, installIA2Support, 86: Error registering class object, code -2147221008 INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:05): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:05): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:05): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:05): Loaded synthDriver eloquence IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Opening - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:21): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:21): oleacc.AccessibleObjectFromEvent with window 263746, objectID 5 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:22): Input: kb(desktop):t DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 45 and childID 0: [Error -2147467259] Unspecified error DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 47 and childID 0: [Error -2147467259] Unspecified error IO - speech._speakSpellingGen (11:50:22): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:22): Adding generator 20 DEBUG - queueHandler.pumpAll (11:50:22): generator 20 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):rightArrow IO - speech._speakSpellingGen (11:50:23): Speaking character u'line feed' DEBUG - queueHandler.registerGeneratorObject (11:50:23): Adding generator 21 DEBUG - queueHandler.pumpAll (11:50:23): generator 21 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):upArrow IO - speech.speak (11:50:23): Speaking [LangChangeCommand ('en_US'), u't'] IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):a IO - speech._speakSpellingGen (11:50:24): Speaking character u'a' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 22 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 83 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 22 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 23 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 86 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 23 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):e IO - speech._speakSpellingGen (11:50:24): Speaking character u'e' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 24 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 89 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 24 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):s IO - speech._speakSpellingGen (11:50:24): Speaking character u's' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 25 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 92 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 25 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 26 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 95 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 26 finished IO - inputCore.InputManager.executeGesture (11:50:26): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:26): oleacc.AccessibleObjectFromEvent with window 263746, objectID 96 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):alt+space IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Restore r 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):x IO - speech._speakSpellingGen (11:50:28): Speaking character u'x' DEBUG - queueHandler.registerGeneratorObject (11:50:28): Adding generator 27 DEBUG - queueHandler.pumpAll (11:50:28): generator 27 finished IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:29): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:29): oleacc.AccessibleObjectFromEvent with window 263746, objectID 162 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:33): Input: kb(desktop):windows+m INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:34): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:34): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:34): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:34): Loaded synthDriver eloquence IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:34): Input: kb(desktop):NVDA+n IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'NVDA menu'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Exit x 13 of 13'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Donate d 11 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Save configuration s 9 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Reset configuration to factory defaults r 8 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Revert to saved configuration r 7 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Configuration profiles... c 6 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Help subMenu h'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Vocalizer subMenu v'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Tools subMenu t'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):rightArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'View log v 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:39): Input: kb(desktop):enter -----Original Message----- From: Pranav Lal [mailto:pranav.lal@...] Sent: Sunday, November 13, 2016 1:03 AM To: 'nvda@nvda.groups.io' <nvda@nvda.groups.io> Subject: NVDA unable to focus when I launch word 2016 Hi all, When I launch word 2016, NVDA freezes and says nothing. I have to quit word using the task manager. I have tried with narrator and word has started as expected. The task manager shows word running. I have tried with all add-ons disabled without success. OS=windows 10 64bit What should I do next?
More All Messages By This Member
Re: quake Sharni-Lee Ward #10395 I heard about this quake this morning on the news. My prayers go out to all of you, especially those who suffered losses of any kind from the earthquake a few years ago, and I hope your families are all okay. toggle quoted message Show quoted text On 14/11/2016 8:43 AM, Mallard wrote: Hello Shaun, I didn't realise you're in New Zealand too... Glad you didn't personally suffer any losses. Blessings, Ollie Il 13/11/2016 22:30, Shaun Everiss ha scritto: 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. .
More All Messages By This Member
Re: quake Mallard <mallard@...> #10394 Hello Shaun, I didn't realise you're in New Zealand too... Glad you didn't personally suffer any losses. Blessings, Ollie toggle quoted message Show quoted text Il 13/11/2016 22:30, Shaun Everiss ha scritto: 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. .
More All Messages By This Member
Re: quake Rosemarie Chavarria #10393 I'm glad you didn't feel it. In 1987 we had a very powerful quake in Whittier which isn't far from where I live. I was visiting a friend of mine and she was afraid so I had to try to keep her calm. Earthquakes can be scary at times but I'm glad you're all right. toggle quoted message Show quoted text On 11/13/2016 1:31 PM, Shaun Everiss wrote: I did not feel it in auckland, but radio and tv is full of it. The last time anything of this happened was 911, even the other christchurch quakes were not as big as this. On 14/11/2016 8:53 a.m., Gene New Zealand wrote: Hi It was a 7.5 or 7.6 earth quake. We felt it up here where we live in taranaki strong as. The whole house was swaying from side to side i guess for at least a minute. It was like pretty freaky It is all over the news papers now and on social media. More can be read at the stuff website at http://www.stuff.co.nz Gene nz On 14/11/2016 8:18 AM, Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
Re: quake Mallard <mallard@...> #10392 Hello Gene, I was just going to write and ask how you're doing. I found your message and take it that you're fine, but please, if there's anything we can do from here to help, don't hesitate to contact me off-list and let me know. Blessings, Ollie toggle quoted message Show quoted text Il 13/11/2016 20:53, Gene New Zealand ha scritto: Hi It was a 7.5 or 7.6 earth quake. We felt it up here where we live in taranaki strong as. The whole house was swaying from side to side i guess for at least a minute. It was like pretty freaky It is all over the news papers now and on social media. More can be read at the stuff website at http://www.stuff.co.nz Gene nz On 14/11/2016 8:18 AM, Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
Re: quake Shaun Everiss #10391 I did not feel it in auckland, but radio and tv is full of it. The last time anything of this happened was 911, even the other christchurch quakes were not as big as this. toggle quoted message Show quoted text On 14/11/2016 8:53 a.m., Gene New Zealand wrote: Hi It was a 7.5 or 7.6 earth quake. We felt it up here where we live in taranaki strong as. The whole house was swaying from side to side i guess for at least a minute. It was like pretty freaky It is all over the news papers now and on social media. More can be read at the stuff website at http://www.stuff.co.nz Gene nz On 14/11/2016 8:18 AM, Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
Re: quake Shaun Everiss #10390 2 people now. one was burried when an historic building collapsed on top of them, another had a heart attack. Dammage is extensive but most stuff seems to hold up well. To be honest our insurance hasn't caught up from the last quake set who knows what they will do now. toggle quoted message Show quoted text On 14/11/2016 8:18 a.m., Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning. .
More All Messages By This Member
Re: quake Gene New Zealand <hurrikennyandopo@...> #10389 Hi It was a 7.5 or 7.6 earth quake. We felt it up here where we live in taranaki strong as. The whole house was swaying from side to side i guess for at least a minute. It was like pretty freaky It is all over the news papers now and on social media. More can be read at the stuff website at http://www.stuff.co.nz Gene nz toggle quoted message Show quoted text On 14/11/2016 8:18 AM, Rosemarie Chavarria wrote: I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
Re: quake Rosemarie Chavarria #10388 I heard about the quake on the news a little earlier today. I think they said one person died but from what I understand, it was a powerful quake. toggle quoted message Show quoted text On 11/13/2016 10:33 AM, Shaun Everiss wrote: Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
quake Shaun Everiss #10387 Hi. To all new zealanders I hope all are well reguarding the quake that happened this morning.
More All Messages By This Member
Re: NVDA unable to focus when I launch word 2016 Brian's Mail list account #10386 I assume Eloquence is the vocaliser version if you have any old versions that are not that one, best uninstall them as they cause issues. I have found viavoice original sappi4 ok but most of the hacked ones are illegal in any case. I still think the easy table navigator has some issues though. Brian bglists@... Sent via blueyonder. Please address personal email to:- briang1@..., putting 'Brian Gaff' in the display name field. toggle quoted message Show quoted text ----- Original Message ----- From: "Pranav Lal" <pranav.lal@...> To: <nvda@nvda.groups.io> Sent: Sunday, November 13, 2016 6:26 AM Subject: Re: [nvda] NVDA unable to focus when I launch word 2016 I now have log dumps of what happens when I try to get focus to word 2016. ERROR - eventHandler.executeEvent (11:49:10): error executing event: gainFocus on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\__i nit__.py", line 338, in event_gainFocus File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 75, in event_gainFocus File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 64, in tableNavAvailable File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 26, in _MSWordTableNavAvailable File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 526, in __init__ AttributeError: 'NoneType' object has no attribute 'range' ERROR - eventHandler.executeEvent (11:49:10): error executing event: caret on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "NVDAObjects\IAccessible\__init__.pyo", line 1280, in event_caret File "NVDAObjects\window\winword.pyo", line 1036, in event_caret File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 524, in __init__ AttributeError: 'NoneType' object has no attribute 'range' INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:49:10): Using Eloquence version 6.1.0.0 INFO - synthDriverHandler.setSynth (11:49:10): Loaded synthDriver eloquence IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):windows+r IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Run dialog Type the name of a program, folder, document, or Internet resource, and Windows will open it for you.'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Open: combo box collapsed'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'edit Alt+o'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:03): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:03): Adding generator 13 DEBUG - queueHandler.pumpAll (11:50:03): generator 13 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):i IO - speech._speakSpellingGen (11:50:04): Speaking character u'i' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 14 DEBUG - queueHandler.pumpAll (11:50:04): generator 14 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):n IO - speech._speakSpellingGen (11:50:04): Speaking character u'n' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 15 DEBUG - queueHandler.pumpAll (11:50:04): generator 15 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:04): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 16 DEBUG - queueHandler.pumpAll (11:50:04): generator 16 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):o IO - speech._speakSpellingGen (11:50:04): Speaking character u'o' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 17 DEBUG - queueHandler.pumpAll (11:50:04): generator 17 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):r IO - speech._speakSpellingGen (11:50:04): Speaking character u'r' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 18 DEBUG - queueHandler.pumpAll (11:50:04): generator 18 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):d IO - speech._speakSpellingGen (11:50:04): Speaking character u'd' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 19 DEBUG - queueHandler.pumpAll (11:50:04): generator 19 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):enter IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] DEBUGWARNING - RPC process 14256 (WINWORD.EXE) (11:50:05): Thread 10272, build\x86\remote\ia2Support.cpp, installIA2Support, 86: Error registering class object, code -2147221008 INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:05): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:05): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:05): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:05): Loaded synthDriver eloquence IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Opening - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:21): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:21): oleacc.AccessibleObjectFromEvent with window 263746, objectID 5 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:22): Input: kb(desktop):t DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 45 and childID 0: [Error -2147467259] Unspecified error DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 47 and childID 0: [Error -2147467259] Unspecified error IO - speech._speakSpellingGen (11:50:22): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:22): Adding generator 20 DEBUG - queueHandler.pumpAll (11:50:22): generator 20 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):rightArrow IO - speech._speakSpellingGen (11:50:23): Speaking character u'line feed' DEBUG - queueHandler.registerGeneratorObject (11:50:23): Adding generator 21 DEBUG - queueHandler.pumpAll (11:50:23): generator 21 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):upArrow IO - speech.speak (11:50:23): Speaking [LangChangeCommand ('en_US'), u't'] IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):a IO - speech._speakSpellingGen (11:50:24): Speaking character u'a' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 22 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 83 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 22 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 23 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 86 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 23 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):e IO - speech._speakSpellingGen (11:50:24): Speaking character u'e' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 24 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 89 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 24 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):s IO - speech._speakSpellingGen (11:50:24): Speaking character u's' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 25 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 92 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 25 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 26 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 95 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 26 finished IO - inputCore.InputManager.executeGesture (11:50:26): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:26): oleacc.AccessibleObjectFromEvent with window 263746, objectID 96 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):alt+space IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Restore r 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):x IO - speech._speakSpellingGen (11:50:28): Speaking character u'x' DEBUG - queueHandler.registerGeneratorObject (11:50:28): Adding generator 27 DEBUG - queueHandler.pumpAll (11:50:28): generator 27 finished IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:29): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:29): oleacc.AccessibleObjectFromEvent with window 263746, objectID 162 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:33): Input: kb(desktop):windows+m INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:34): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:34): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:34): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:34): Loaded synthDriver eloquence IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:34): Input: kb(desktop):NVDA+n IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'NVDA menu'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Exit x 13 of 13'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Donate d 11 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Save configuration s 9 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Reset configuration to factory defaults r 8 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Revert to saved configuration r 7 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Configuration profiles... c 6 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Help subMenu h'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Vocalizer subMenu v'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Tools subMenu t'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):rightArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'View log v 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:39): Input: kb(desktop):enter -----Original Message----- From: Pranav Lal [mailto:pranav.lal@...] Sent: Sunday, November 13, 2016 1:03 AM To: 'nvda@nvda.groups.io' <nvda@nvda.groups.io> Subject: NVDA unable to focus when I launch word 2016 Hi all, When I launch word 2016, NVDA freezes and says nothing. I have to quit word using the task manager. I have tried with narrator and word has started as expected. The task manager shows word running. I have tried with all add-ons disabled without success. OS=windows 10 64bit What should I do next?
More All Messages By This Member
Re: NVDA unable to focus when I launch word 2016 Brian's Mail list account #10385 So does it work when you suspend the add ons mentioned in the log then? I have to say, I chucked out easy table navigator as it was slowing the use of some programs when it came to a table. Brian bglists@... Sent via blueyonder. Please address personal email to:- briang1@..., putting 'Brian Gaff' in the display name field. toggle quoted message Show quoted text ----- Original Message ----- From: "Pranav Lal" <pranav.lal@...> To: <nvda@nvda.groups.io> Sent: Sunday, November 13, 2016 6:26 AM Subject: Re: [nvda] NVDA unable to focus when I launch word 2016 I now have log dumps of what happens when I try to get focus to word 2016. ERROR - eventHandler.executeEvent (11:49:10): error executing event: gainFocus on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\__i nit__.py", line 338, in event_gainFocus File "eventHandler.pyo", line 98, in next File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 75, in event_gainFocus File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 64, in tableNavAvailable File "C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy TableNavigator.py", line 26, in _MSWordTableNavAvailable File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 526, in __init__ AttributeError: 'NoneType' object has no attribute 'range' ERROR - eventHandler.executeEvent (11:49:10): error executing event: caret on <NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at 0x04F59E90> with extra args of {} Traceback (most recent call last): File "eventHandler.pyo", line 143, in executeEvent File "eventHandler.pyo", line 91, in __init__ File "eventHandler.pyo", line 98, in next File "NVDAObjects\IAccessible\__init__.pyo", line 1280, in event_caret File "NVDAObjects\window\winword.pyo", line 1036, in event_caret File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo File "NVDAObjects\window\winword.pyo", line 524, in __init__ AttributeError: 'NoneType' object has no attribute 'range' INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:49:10): Using Eloquence version 6.1.0.0 INFO - synthDriverHandler.setSynth (11:49:10): Loaded synthDriver eloquence IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:02): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):windows+r IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Run dialog Type the name of a program, folder, document, or Internet resource, and Windows will open it for you.'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'Open: combo box collapsed'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'edit Alt+o'] IO - speech.speak (11:50:03): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:03): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:03): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:03): Adding generator 13 DEBUG - queueHandler.pumpAll (11:50:03): generator 13 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):i IO - speech._speakSpellingGen (11:50:04): Speaking character u'i' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 14 DEBUG - queueHandler.pumpAll (11:50:04): generator 14 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):n IO - speech._speakSpellingGen (11:50:04): Speaking character u'n' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 15 DEBUG - queueHandler.pumpAll (11:50:04): generator 15 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):w IO - speech._speakSpellingGen (11:50:04): Speaking character u'w' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 16 DEBUG - queueHandler.pumpAll (11:50:04): generator 16 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):o IO - speech._speakSpellingGen (11:50:04): Speaking character u'o' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 17 DEBUG - queueHandler.pumpAll (11:50:04): generator 17 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):r IO - speech._speakSpellingGen (11:50:04): Speaking character u'r' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 18 DEBUG - queueHandler.pumpAll (11:50:04): generator 18 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):d IO - speech._speakSpellingGen (11:50:04): Speaking character u'd' DEBUG - queueHandler.registerGeneratorObject (11:50:04): Adding generator 19 DEBUG - queueHandler.pumpAll (11:50:04): generator 19 finished IO - inputCore.InputManager.executeGesture (11:50:04): Input: kb(desktop):enter IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:04): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] DEBUGWARNING - RPC process 14256 (WINWORD.EXE) (11:50:05): Thread 10272, build\x86\remote\ia2Support.cpp, installIA2Support, 86: Error registering class object, code -2147221008 INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:05): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:05): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:05): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:05): Loaded synthDriver eloquence IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Opening - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:05): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:21): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:21): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:21): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:21): Loaded synthDriver eloquence IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:21): oleacc.AccessibleObjectFromEvent with window 263746, objectID 5 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:21): Speaking [LangChangeCommand ('en_US'), u'blank'] IO - inputCore.InputManager.executeGesture (11:50:22): Input: kb(desktop):t DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 45 and childID 0: [Error -2147467259] Unspecified error DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22): oleacc.AccessibleObjectFromEvent with window 263746, objectID 47 and childID 0: [Error -2147467259] Unspecified error IO - speech._speakSpellingGen (11:50:22): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:22): Adding generator 20 DEBUG - queueHandler.pumpAll (11:50:22): generator 20 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):rightArrow IO - speech._speakSpellingGen (11:50:23): Speaking character u'line feed' DEBUG - queueHandler.registerGeneratorObject (11:50:23): Adding generator 21 DEBUG - queueHandler.pumpAll (11:50:23): generator 21 finished IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):upArrow IO - speech.speak (11:50:23): Speaking [LangChangeCommand ('en_US'), u't'] IO - inputCore.InputManager.executeGesture (11:50:23): Input: kb(desktop):a IO - speech._speakSpellingGen (11:50:24): Speaking character u'a' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 22 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 83 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 22 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 23 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 86 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 23 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):e IO - speech._speakSpellingGen (11:50:24): Speaking character u'e' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 24 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 89 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 24 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):s IO - speech._speakSpellingGen (11:50:24): Speaking character u's' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 25 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 92 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 25 finished IO - inputCore.InputManager.executeGesture (11:50:24): Input: kb(desktop):t IO - speech._speakSpellingGen (11:50:24): Speaking character u't' DEBUG - queueHandler.registerGeneratorObject (11:50:24): Adding generator 26 DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24): oleacc.AccessibleObjectFromEvent with window 263746, objectID 95 and childID 0: [Error -2147467259] Unspecified error DEBUG - queueHandler.pumpAll (11:50:24): generator 26 finished IO - inputCore.InputManager.executeGesture (11:50:26): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:26): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:26): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:26): Loaded synthDriver eloquence IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:26): oleacc.AccessibleObjectFromEvent with window 263746, objectID 96 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:26): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):alt+space IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Restore r 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:28): Input: kb(desktop):x IO - speech._speakSpellingGen (11:50:28): Speaking character u'x' DEBUG - queueHandler.registerGeneratorObject (11:50:28): Adding generator 27 DEBUG - queueHandler.pumpAll (11:50:28): generator 27 finished IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:28): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:29): Input: kb(desktop):alt+tab INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:29): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:29): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:29): Loaded synthDriver eloquence IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1 - Word'] DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:29): oleacc.AccessibleObjectFromEvent with window 263746, objectID 162 and childID 0: [Error -2147467259] Unspecified error IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Document1'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi line'] IO - speech.speak (11:50:29): Speaking [LangChangeCommand ('en_US'), u'tatest'] IO - inputCore.InputManager.executeGesture (11:50:33): Input: kb(desktop):windows+m INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:34): Using Eloquence version 6.1.0.0 DEBUG - speechDictHandler.SpeechDict.load (11:50:34): Loading speech dictionary 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic'... DEBUG - speechDictHandler.SpeechDict.load (11:50:34): file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American English.dic' not found. INFO - synthDriverHandler.setSynth (11:50:34): Loaded synthDriver eloquence IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'Desktop list'] IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4'] IO - inputCore.InputManager.executeGesture (11:50:34): Input: kb(desktop):NVDA+n IO - speech.speak (11:50:34): Speaking [LangChangeCommand ('en_US'), u'NVDA menu'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Exit x 13 of 13'] IO - inputCore.InputManager.executeGesture (11:50:35): Input: kb(desktop):upArrow IO - speech.speak (11:50:35): Speaking [LangChangeCommand ('en_US'), u'Donate d 11 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Save configuration s 9 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Reset configuration to factory defaults r 8 of 13'] IO - inputCore.InputManager.executeGesture (11:50:36): Input: kb(desktop):upArrow IO - speech.speak (11:50:36): Speaking [LangChangeCommand ('en_US'), u'Revert to saved configuration r 7 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Configuration profiles... c 6 of 13'] IO - inputCore.InputManager.executeGesture (11:50:37): Input: kb(desktop):upArrow IO - speech.speak (11:50:37): Speaking [LangChangeCommand ('en_US'), u'Help subMenu h'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Vocalizer subMenu v'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):upArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'Tools subMenu t'] IO - inputCore.InputManager.executeGesture (11:50:38): Input: kb(desktop):rightArrow IO - speech.speak (11:50:38): Speaking [LangChangeCommand ('en_US'), u'View log v 1 of 7'] IO - inputCore.InputManager.executeGesture (11:50:39): Input: kb(desktop):enter -----Original Message----- From: Pranav Lal [mailto:pranav.lal@...] Sent: Sunday, November 13, 2016 1:03 AM To: 'nvda@nvda.groups.io' <nvda@nvda.groups.io> Subject: NVDA unable to focus when I launch word 2016 Hi all, When I launch word 2016, NVDA freezes and says nothing. I have to quit word using the task manager. I have tried with narrator and word has started as expected. The task manager shows word running. I have tried with all add-ons disabled without success. OS=windows 10 64bit What should I do next?
More All Messages By This Member

97141 - 97160 of 107487

Home Hashtags Subgroups About Features Pricing Updates Terms Help Twitter