Could you please state the browser you are currently using? How about a
log?

On 2/1/17, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:

hi.
i had this problem before.
completely uninstalled nvda and reinstalled again.
my problem is solved now and nvda works great!
but i dont know which browser do you use.
i am only satisfied with nvda and firefox and never dont use another
browsers.

On 2/1/17, Josh Kennedy <joshknnd1982@gmail.com> wrote:

I am using latest NVDA 2016.4. on the walmart website NVDA slows to a
crawl, while jaws18 demo is very fast and snappy and works fine. I would
like to ask the NVDA devs to re-write browse mode when they get a chance
to NVDA is fast and snappy as well, like jaws is. If it would not have
been for jaws, as my secondary backup screen reader, I couldn't have
placed my order on walmart's website. Hopefully NVDA will fix the
sluggish browse mode soon.


thanks


Josh

--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org

hi.
i had this problem before.
completely uninstalled nvda and reinstalled again.
my problem is solved now and nvda works great!
but i dont know which browser do you use.
i am only satisfied with nvda and firefox and never dont use another
browsers.

On 2/1/17, Josh Kennedy <joshknnd1982@gmail.com> wrote:

I am using latest NVDA 2016.4. on the walmart website NVDA slows to a
crawl, while jaws18 demo is very fast and snappy and works fine. I would
like to ask the NVDA devs to re-write browse mode when they get a chance
to NVDA is fast and snappy as well, like jaws is. If it would not have
been for jaws, as my secondary backup screen reader, I couldn't have
placed my order on walmart's website. Hopefully NVDA will fix the
sluggish browse mode soon.


thanks


Josh

--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org

Yes your advice did help. However, where do I go to make the change
regarding backstage?

Thank you very much.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin
Christensen
Sent: Tuesday, January 31, 2017 10:22 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] new member and a few questions



Hi Dan,



Welcome to the group!



Re "Line feed", what program are you in when it announces that? For me, in
most programs, it doesn't necessarily announce anything when I press ENTER,
but as I left or right arrow through the text it announces line feed when it
gets to where I pressed enter? This is to indicate that it was a deliberate
press of ENTER and not just reaching the right margin for instance.


You can set NVDA to "Speak command keys" by pressing NVDA+4 or from NVDA's
keyboard preferences dialog. This will announce "ENTER" when you press that
key. Note that it will also announce things like "CONTROL+RIGHT ARROW" as
you move by word, "NVDA+END" before reading the status bar and so on.



Re saving files. Again in word, if I press control+s, NVDA reads:

"ctrl+s

Save As tab selected Save As Alt, F, A " That is using the default
setup of Word showing the "backstage". If I set it up to go straight to the
save as dialog (file - options - save then check "Don't show the backstage
when opening or saving files".



If I have it set to go straight to the save as dialog, I get:



"ctrl+s

Save As dialog File name: File name:

Save as type: Save as type:

File name: combo box collapsed

edit Alt+n

selected some filename.docx"

Which is exactly the same if I press f12.



In Wordpad, when I press control+s, I get:



"ctrl+s

Save As dialog

File name: combo box collapsed

edit Alt+n

selected Document.rtf

"



In Notepad I get:



"ctrl+s

Save As dialog File name: File name:

Save as type: Save as type:

File name: combo box collapsed

edit Alt+n

selected *.txt"





Not sure if that helps though?



Regards


Quentin.





On Wed, Feb 1, 2017 at 2:02 PM, Dan Thompson <dmt031073@gmail.com> wrote:

First I am very greatful for this list and all the work
developers have put into NVDA.

Q1. Instead of announcing “line feed”, Is it possible to cause NVDA to
announce new line or blank when pressing enter to move to a new line?



Q2. Recently NVDA in my class room will not say “file name” when pressing
control + s when saving file for the first time.

NVDA will not say “save as” when pressing f12.



When we press control + c or control + v, NVDA does not announce,

“copy” or “paste.” Is there some setting that is not correct?

Thanks for reading this long email and thanks in advance for your
assistance.





This is the way of peace: Overcome evil with good, and falsehood with truth,
and hatred with love.” —Peace Pilgrim



“God is the mind that imagines physical reality. We are each like a cell in
that mind.” —Peter Shepherd









--

Quentin Christensen
Training Material Developer

Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/



Ph <tel:%2B61%207%203149%203306> +61 7 3149 3306

<http://www.nvaccess.org/> www.nvaccess.org
Facebook: <http://www.facebook.com/NVAccess>
http://www.facebook.com/NVAccess
Twitter: @NVAccess

I am using the latest version of NVDA (2016-4) on Windows 10, and have
been for several months now. I started experiencing a rather strange
and annoying behavior today, seemingly out of nowhere. I hope I can
properly describe it.

The only way I can describe what NVDA is doing is that it randomly
reads a different line of whatever application I am in. It reads the
one I want correctly, but will also read a line I'm not even on. For
example, conveniently, as I was typing the previous sentence, NVDA
read the first line in my edit window.

I have noticed this behavior in pretty much every program I use,
including Firefox, Internet Explorer, Notepad, Thunderbird, and
Chicken Nugget. I am loathed to reinstall from scratch, considering I
have made a lot of configuration changes, so I would appreciate any
advice. If there is debugging I can enable or whatever, I am happy to
do so.

I should also mention that I initially thought this could be something
funky with my keyboard, but I switched to JAWS, which I used in the
past, but it didn't occur then.

Thanks,

Gary

I am using latest NVDA 2016.4. on the walmart website NVDA slows to a
crawl, while jaws18 demo is very fast and snappy and works fine. I would
like to ask the NVDA devs to re-write browse mode when they get a chance
to NVDA is fast and snappy as well, like jaws is. If it would not have
been for jaws, as my secondary backup screen reader, I couldn't have
placed my order on walmart's website. Hopefully NVDA will fix the
sluggish browse mode soon.


thanks


Josh

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin Christensen
Sent: Tuesday, January 31, 2017 10:22 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] new member and a few questions

Hi Dan,

Welcome to the group!

Re "Line feed", what program are you in when it announces that? For
me, in most programs, it doesn't necessarily announce anything when I
press ENTER, but as I left or right arrow through the text it
announces line feed when it gets to where I pressed enter? This is to
indicate that it was a deliberate press of ENTER and not just reaching
the right margin for instance.

You can set NVDA to "Speak command keys" by pressing NVDA+4 or from
NVDA's keyboard preferences dialog. This will announce "ENTER" when
you press that key. Note that it will also announce things like
"CONTROL+RIGHT ARROW" as you move by word, "NVDA+END" before reading
the status bar and so on.

Re saving files. Again in word, if I press control+s, NVDA reads:
"ctrl+s
Save As tab selected Save As Alt, F, A " That is using the
default setup of Word showing the "backstage". If I set it up to go
straight to the save as dialog (file - options - save then check
"Don't show the backstage when opening or saving files".

If I have it set to go straight to the save as dialog, I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected some filename.docx"
Which is exactly the same if I press f12.

In Wordpad, when I press control+s, I get:

"ctrl+s
Save As dialog
File name: combo box collapsed
edit Alt+n
selected Document.rtf
"

In Notepad I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected *.txt"


Not sure if that helps though?

Regards

Quentin.


On Wed, Feb 1, 2017 at 2:02 PM, Dan Thompson <dmt031073@gmail.com> wrote:

First I am very greatful for this list and all the
work developers have put into NVDA.

Q1. Instead of announcing “line feed”, Is it possible to cause NVDA
to announce new line or blank when pressing enter to move to a new line?



Q2. Recently NVDA in my class room will not say “file name” when
pressing control + s when saving file for the first time.

NVDA will not say “save as” when pressing f12.



When we press control + c or control + v, NVDA does not announce,

“copy” or “paste.” Is there some setting that is not correct?

Thanks for reading this long email and thanks in advance for your
assistance.





*This is the way of peace: Overcome evil with good, and falsehood
with truth, and hatred with love.”* —Peace Pilgrim



*“God is the mind that imagines physical reality. We are each like a
cell in that mind.”* —Peter Shepherd

--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/

Ph +61 7 3149 3306
www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Hi Dan,

Welcome to the group!

Re "Line feed", what program are you in when it announces that? For
me, in most programs, it doesn't necessarily announce anything when I
press ENTER, but as I left or right arrow through the text it
announces line feed when it gets to where I pressed enter? This is to
indicate that it was a deliberate press of ENTER and not just reaching
the right margin for instance.

You can set NVDA to "Speak command keys" by pressing NVDA+4 or from
NVDA's keyboard preferences dialog. This will announce "ENTER" when
you press that key. Note that it will also announce things like
"CONTROL+RIGHT ARROW" as you move by word, "NVDA+END" before reading
the status bar and so on.

Re saving files. Again in word, if I press control+s, NVDA reads:
"ctrl+s
Save As tab selected Save As Alt, F, A " That is using the
default setup of Word showing the "backstage". If I set it up to go
straight to the save as dialog (file - options - save then check
"Don't show the backstage when opening or saving files".

If I have it set to go straight to the save as dialog, I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected some filename.docx"
Which is exactly the same if I press f12.

In Wordpad, when I press control+s, I get:

"ctrl+s
Save As dialog
File name: combo box collapsed
edit Alt+n
selected Document.rtf
"

In Notepad I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected *.txt"


Not sure if that helps though?

Regards

Quentin.


On Wed, Feb 1, 2017 at 2:02 PM, Dan Thompson <dmt031073@gmail.com> wrote:

First I am very greatful for this list and all the
work developers have put into NVDA.

Q1. Instead of announcing “line feed”, Is it possible to cause NVDA
to announce new line or blank when pressing enter to move to a new line?



Q2. Recently NVDA in my class room will not say “file name” when
pressing control + s when saving file for the first time.

NVDA will not say “save as” when pressing f12.



When we press control + c or control + v, NVDA does not announce,

“copy” or “paste.” Is there some setting that is not correct?

Thanks for reading this long email and thanks in advance for your
assistance.





*This is the way of peace: Overcome evil with good, and falsehood
with truth, and hatred with love.”* —Peace Pilgrim



*“God is the mind that imagines physical reality. We are each like a
cell in that mind.”* —Peter Shepherd

--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/

Ph +61 7 3149 3306
www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Hi guys

Recently updated:
The following tutorials have been added to accessibilitycentral.net

RECENTLY UPDATED: A free TV guide for New Zealand that can be used with
NVDA; Audio described listings by Able.co.nz (both on the NVDA tutorials
for other programs page).
http://www.accessibilitycentral.net/nvda%20tutorials%20for%20other%20programs.html
NEW: All NVDA related pages have had a brief description and link added
which will take you to the recent nvaccess In Process blog (to keep NVDA
users up to date with developments)

I will add more tutorials to this thread as they are written up.

Gene NZ

Hi Dan,

Welcome to the group!

Re "Line feed", what program are you in when it announces that? For
me, in most programs, it doesn't necessarily announce anything when I
press ENTER, but as I left or right arrow through the text it
announces line feed when it gets to where I pressed enter? This is to
indicate that it was a deliberate press of ENTER and not just reaching
the right margin for instance.

You can set NVDA to "Speak command keys" by pressing NVDA+4 or from
NVDA's keyboard preferences dialog. This will announce "ENTER" when
you press that key. Note that it will also announce things like
"CONTROL+RIGHT ARROW" as you move by word, "NVDA+END" before reading
the status bar and so on.

Re saving files. Again in word, if I press control+s, NVDA reads:
"ctrl+s
Save As tab selected Save As Alt, F, A " That is using the
default setup of Word showing the "backstage". If I set it up to go
straight to the save as dialog (file - options - save then check
"Don't show the backstage when opening or saving files".

If I have it set to go straight to the save as dialog, I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected some filename.docx"
Which is exactly the same if I press f12.

In Wordpad, when I press control+s, I get:

"ctrl+s
Save As dialog
File name: combo box collapsed
edit Alt+n
selected Document.rtf
"

In Notepad I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected *.txt"


Not sure if that helps though?

Regards

Quentin.


On Wed, Feb 1, 2017 at 2:02 PM, Dan Thompson <dmt031073@gmail.com> wrote:

First I am very greatful for this list and all the
work developers have put into NVDA.

Q1. Instead of announcing “line feed”, Is it possible to cause NVDA
to announce new line or blank when pressing enter to move to a new line?



Q2. Recently NVDA in my class room will not say “file name” when
pressing control + s when saving file for the first time.

NVDA will not say “save as” when pressing f12.



When we press control + c or control + v, NVDA does not announce,

“copy” or “paste.” Is there some setting that is not correct?

Thanks for reading this long email and thanks in advance for your
assistance.





*This is the way of peace: Overcome evil with good, and falsehood
with truth, and hatred with love.”* —Peace Pilgrim



*“God is the mind that imagines physical reality. We are each like a
cell in that mind.”* —Peter Shepherd

--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/

Ph +61 7 3149 3306
www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Hi guys

Recently updated:
The following tutorials have been added to accessibilitycentral.net

RECENTLY UPDATED: A free TV guide for New Zealand that can be used with
NVDA; Audio described listings by Able.co.nz (both on the NVDA tutorials
for other programs page).
http://www.accessibilitycentral.net/nvda%20tutorials%20for%20other%20programs.html
NEW: All NVDA related pages have had a brief description and link added
which will take you to the recent nvaccess In Process blog (to keep NVDA
users up to date with developments)

I will add more tutorials to this thread as they are written up.

Gene NZ


--

<b>Check out the new location of my accessibility central website for
NVDA tutorials, NVDA road tested programs, and other eyesight related
topics.
http://www.accessibilitycentral.net/ If you would like to keep up to
date with whats being updated on our website, you can also follow us on
facebook by visiting
the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries

Hi Dan,

Welcome to the group!

Re "Line feed", what program are you in when it announces that? For me, in
most programs, it doesn't necessarily announce anything when I press ENTER,
but as I left or right arrow through the text it announces line feed when
it gets to where I pressed enter? This is to indicate that it was a
deliberate press of ENTER and not just reaching the right margin for
instance.

You can set NVDA to "Speak command keys" by pressing NVDA+4 or from NVDA's
keyboard preferences dialog. This will announce "ENTER" when you press
that key. Note that it will also announce things like "CONTROL+RIGHT
ARROW" as you move by word, "NVDA+END" before reading the status bar and so
on.

Re saving files. Again in word, if I press control+s, NVDA reads:
"ctrl+s
Save As tab selected Save As Alt, F, A " That is using the default
setup of Word showing the "backstage". If I set it up to go straight to
the save as dialog (file - options - save then check "Don't show the
backstage when opening or saving files".

If I have it set to go straight to the save as dialog, I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected some filename.docx"
Which is exactly the same if I press f12.

In Wordpad, when I press control+s, I get:

"ctrl+s
Save As dialog
File name: combo box collapsed
edit Alt+n
selected Document.rtf
"

In Notepad I get:

"ctrl+s
Save As dialog File name: File name:
Save as type: Save as type:
File name: combo box collapsed
edit Alt+n
selected *.txt"


Not sure if that helps though?

Regards

Quentin.


On Wed, Feb 1, 2017 at 2:02 PM, Dan Thompson <dmt031073@gmail.com> wrote:

First I am very greatful for this list and all the work
developers have put into NVDA.

Q1. Instead of announcing “line feed”, Is it possible to cause NVDA to
announce new line or blank when pressing enter to move to a new line?



Q2. Recently NVDA in my class room will not say “file name” when
pressing
control + s when saving file for the first time.

NVDA will not say “save as” when pressing f12.



When we press control + c or control + v, NVDA does not announce,

“copy” or “paste.” Is there some setting that is not correct?

Thanks for reading this long email and thanks in advance for your
assistance.





*This is the way of peace: Overcome evil with good, and falsehood with
truth, and hatred with love.”* —Peace Pilgrim



*“God is the mind that imagines physical reality. We are each like a cell
in that mind.”* —Peter Shepherd

--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/

Ph +61 7 3149 3306
www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess