Date   

Re: Free Music Production software

Michelle's Home Emails
 

Hi 

Try Dancingdots they have various programs and information perhaps you could take a look at dancingdots website. 

Kind wishes 
Michelle 

Sent from my iPhone

On 9 Apr 2017, at 9:11 am, Simon Jaeger <simon@...> wrote:

Hi,

Reading the whole thread, and I'll respond to a few things here:

1. Definitely recommend QWS. It's well-documented and is a great midi sequencer. Aside from that, Reaper and Osara are quite good, and Reaper has a cheap non-commercial license.

2. You need a midi-to-USB converter before you can get the MIDI data into your computer. Check out Amazon for this.

3. If you actually want to record the resulting audio of the keyboard, you'll need recording software like audacity, and a way to plug the keyboard's audio output into the computer. You could record the individual tracks and add effects to them this way. But remember that midi is only note data, so anything you compose on your keyboard has to be played either through the keyboard or through a midi synthesizer on Windows. The one that ships with Windows is pretty bad quality, and has a very noticeable delay between the time a note is sent and the time it actually plays. On some hardware it's also off key.


So, your first step is probably getting aMIDI box that plugs into the computer. Alternatively, you could just plug the keyboard into a line-in jack on the computer and record using Audacity, but you'd lose the ability to edit individual notes after recording them. If your computer does not have a line-in jack, you could try this audio interface plus an eighth-inch to RCA cable, for getting a stereo signal from your keyboard to the computer:

https://www.amazon.com/Behringer-UCA202-BEHRINGER-U-CONTROL/dp/B000KW2YEI/ref=sr_1_1?ie=UTF8&qid=1491692922&sr=8-1&keywords=behringer+202


Unfortunately, you are probably not going to find an easy way to do midi sequencing without spending some money to get a midi interface.


Hope this helps,


Simon






On 2017-04-07 23:33, Ame wrote:
Hi all!
 
I have a nice Casio keyboard and it’s got a USB port on it.  Never seen one like it.  I’d love to start creating some music so I was looking at sequencer software.  I found a list of free and open source programs and wondered if anybody had any recommendations.  I can’t afford to buy anything right now so I’m hoping one of these programs will provide what I need.  The list this site gives begins with the one they recommend most highly.  I’ve not heard of any of them.  There’s  LMMS, Hydrogen, temper and DarkWave Studio.  Is anyone familiar with any of these or perhaps other programs that do a good job and, of course, will work with NVDA?  Any feedback I receive will be appreciated.  Thanks so much.
 
Ame


advanced microsoft word tutorials?

 

I tried looking at the AFB titorials and otherwise for audio but could not find any on using advanced Micrsroft word and office features with NVDA like outlines and stuff. Can someone send me a link to YouTube or something that explains advanced Microsoft word features and how to use them?


Re: Free Music Production software

Simon Jaeger
 

I forgot to add that your keyboard probably supports some effects natively (at the very least, reverb and chorus). You have 16 channels of midi to work with, which means you can have 16 tracks playing simultaneously with different sounds, volumes, stereo panning, and effect settings. Eventually, you may want to look into using Reaper and some VST instruments. You'll play notes on your keyboard and they'll be sent to the instruments using MIDI. Casio keyboards are good, but their sounds (particularly the pianos) are often a lot lower quality than some of the free plug-ins available on Windows.


On 2017-04-08 16:11, Simon Jaeger wrote:

Hi,

Reading the whole thread, and I'll respond to a few things here:

1. Definitely recommend QWS. It's well-documented and is a great midi sequencer. Aside from that, Reaper and Osara are quite good, and Reaper has a cheap non-commercial license.

2. You need a midi-to-USB converter before you can get the MIDI data into your computer. Check out Amazon for this.

3. If you actually want to record the resulting audio of the keyboard, you'll need recording software like audacity, and a way to plug the keyboard's audio output into the computer. You could record the individual tracks and add effects to them this way. But remember that midi is only note data, so anything you compose on your keyboard has to be played either through the keyboard or through a midi synthesizer on Windows. The one that ships with Windows is pretty bad quality, and has a very noticeable delay between the time a note is sent and the time it actually plays. On some hardware it's also off key.


So, your first step is probably getting aMIDI box that plugs into the computer. Alternatively, you could just plug the keyboard into a line-in jack on the computer and record using Audacity, but you'd lose the ability to edit individual notes after recording them. If your computer does not have a line-in jack, you could try this audio interface plus an eighth-inch to RCA cable, for getting a stereo signal from your keyboard to the computer:

https://www.amazon.com/Behringer-UCA202-BEHRINGER-U-CONTROL/dp/B000KW2YEI/ref=sr_1_1?ie=UTF8&qid=1491692922&sr=8-1&keywords=behringer+202


Unfortunately, you are probably not going to find an easy way to do midi sequencing without spending some money to get a midi interface.


Hope this helps,


Simon






On 2017-04-07 23:33, Ame wrote:
Hi all!
 
I have a nice Casio keyboard and it’s got a USB port on it.  Never seen one like it.  I’d love to start creating some music so I was looking at sequencer software.  I found a list of free and open source programs and wondered if anybody had any recommendations.  I can’t afford to buy anything right now so I’m hoping one of these programs will provide what I need.  The list this site gives begins with the one they recommend most highly.  I’ve not heard of any of them.  There’s  LMMS, Hydrogen, temper and DarkWave Studio.  Is anyone familiar with any of these or perhaps other programs that do a good job and, of course, will work with NVDA?  Any feedback I receive will be appreciated.  Thanks so much.
 
Ame



Re: Free Music Production software

Simon Jaeger
 

Hi,

Reading the whole thread, and I'll respond to a few things here:

1. Definitely recommend QWS. It's well-documented and is a great midi sequencer. Aside from that, Reaper and Osara are quite good, and Reaper has a cheap non-commercial license.

2. You need a midi-to-USB converter before you can get the MIDI data into your computer. Check out Amazon for this.

3. If you actually want to record the resulting audio of the keyboard, you'll need recording software like audacity, and a way to plug the keyboard's audio output into the computer. You could record the individual tracks and add effects to them this way. But remember that midi is only note data, so anything you compose on your keyboard has to be played either through the keyboard or through a midi synthesizer on Windows. The one that ships with Windows is pretty bad quality, and has a very noticeable delay between the time a note is sent and the time it actually plays. On some hardware it's also off key.


So, your first step is probably getting aMIDI box that plugs into the computer. Alternatively, you could just plug the keyboard into a line-in jack on the computer and record using Audacity, but you'd lose the ability to edit individual notes after recording them. If your computer does not have a line-in jack, you could try this audio interface plus an eighth-inch to RCA cable, for getting a stereo signal from your keyboard to the computer:

https://www.amazon.com/Behringer-UCA202-BEHRINGER-U-CONTROL/dp/B000KW2YEI/ref=sr_1_1?ie=UTF8&qid=1491692922&sr=8-1&keywords=behringer+202


Unfortunately, you are probably not going to find an easy way to do midi sequencing without spending some money to get a midi interface.


Hope this helps,


Simon






On 2017-04-07 23:33, Ame wrote:
Hi all!
 
I have a nice Casio keyboard and it’s got a USB port on it.  Never seen one like it.  I’d love to start creating some music so I was looking at sequencer software.  I found a list of free and open source programs and wondered if anybody had any recommendations.  I can’t afford to buy anything right now so I’m hoping one of these programs will provide what I need.  The list this site gives begins with the one they recommend most highly.  I’ve not heard of any of them.  There’s  LMMS, Hydrogen, temper and DarkWave Studio.  Is anyone familiar with any of these or perhaps other programs that do a good job and, of course, will work with NVDA?  Any feedback I receive will be appreciated.  Thanks so much.
 
Ame


Facebook with Firefox and NVDA

Felix G.
 

Hello,
has anyone found a workaround for Firefox being sluggish in the standard view of Facebook, especially when using j and k to navigate the news feed? Also, could anyone please offer some advice on how to start a new messenger conversation? When typing the name of a contact into the search field then using the arrow keys to find the right contact, only the contents of the search field are announced but not the selected entry in the list. I have verified with the navigator that selection moves between list items, they're just not announced.
I'm thinking of switching to mobile view but FB help recommends standard view for accessibility.
Anything obvious I might be doing wrong? I can sort of get around and accomplish my goals but it feels sluggish, inefficient and tiresome, as if using something that wasn't designed to be used in this way although it claims to be. Also, I can reproduce the problem on at least two systems.
The rest of this message is sort of a more general rant, optional reading matter so to speak.
As an aside, I find that unfortunately, while still being a great browser in many respects, Firefox is currently getting quite sluggish in terms of moving the focus in response to requests by screen readers. It ends up creating timing issues where the focus bounces back because the events appear in the wrong order or too late. I know it sounds as if I'm complaining, which in a way I am, but very much in the spirit of saying our user experience on the web could be truly great if those microfrustrations were removed. So this is more about pointing out potential for improvement and asking if others are seeing what I am seeing through their windows on reality.
What do I mean by microfrustrations? That's a term I invented to describe minor annoyances that over time accumulate into a general feeling of being stressed out or frustrated. I'm afraid that's what the web is becoming for us, and since this is the result of a complex interplay between many components, the real challenge seems to be finding the one where a change would affect the entire system the most. Should we be grateful that things work at all? Or should we self-confidently demand that our interfaces be just as smooth, streamlined and fun to use as from a sighted perspective? The greatest enemy of good, in my opinion, is good enough.
Kind regards,
Felix Grützmacher


Re: Free Music Production software

John Wilson <j.wilson07@...>
 

Is there anything equivalent to QWS but for standard interfaced electric and electro-acoustic guitars?

John.

On 08/04/2017 07:44, Shaun Everiss wrote:
have you tried qws

http://qws.andrelouis.com

thats free and is used a lot by the blind, sonar studio can be used, and reeper if you can afford it there are 2 licence types and an access plugin for nvda which I foget where to get but its called osara its on github if you want to get that one.




On 8/04/2017 6:33 p.m., Ame wrote:
Hi all!

I have a nice Casio keyboard and it’s got a USB port on it. Never seen one like it. I’d love to start creating some music so I was looking at sequencer software. I found a list of free and open source programs and wondered if anybody had any recommendations. I can’t afford to buy anything right now so I’m hoping one of these programs will provide what I need. The list this site gives begins with the one they recommend most highly. I’ve not heard of any of them. There’s LMMS, Hydrogen, temper and DarkWave Studio. Is anyone familiar with any of these or perhaps other programs that do a good job and, of course, will work with NVDA? Any feedback I receive will be appreciated. Thanks so much.

Ame



Re: Website testing opportunity

 

Well if you email her you will get an online form to fill, I got one, its bassed in uk but an online thing is being worked on right now and I filled out the form.

On 9/04/2017 7:10 a.m., The Wolf wrote:
I wish you allowed people in the us to join the testing team


On 4/7/2017 5:45 PM, Shaun Everiss wrote:
I have sent you a direct mail, I have tested for a lot of people in the past but as is usual in the self employed freelance world I have, bar an ongoing contract or 2 with one or more companies I am fresh out of any projects so one more won't bother me much.

I have also just brought my system back up after a failier so I am fresh and ready to work.




On 7/04/2017 4:15 p.m., Juliette wrote:
Hello,

I am Juliette, the founder of Inclusight. I am helping websites being more
accessible for people with disabilities or people who struggle with
technology. In fact, we are offering website testing opportunities so that
people can give their feedback on the accessibility. We have opportunities
all over the UK. The average testing time is 45minutes and testers are
always rewarded for their feedback.
If you are interested to know more please let me know. Feel free to ask me
any questions you may have. The best way to contact me is to send me an
email at juliette@inclu-sight.com or to call me at 07760934012
About us: Inclusight is a registered company committed to make the web more
accessible. We comply with the Data Protection Act and the Market Research
Society Code of Conduct. If you are interested in becoming a tester, reply
to this email or call us at 07760934012.


I am looking forward to hearing from you.
Kind Regards,
Juliette





Re: Free Music Production software

Mohammadreza Rashad
 

Maybe when connected, recognized as MIDI input device.
About your second questions, QWS has MIDI-compatible effects such as
reverb and chorus. You can study QWS help for mor info in RTF format
from http://www.andrelouis.com/qws/pub/qwshelp.zip.
Best wishes,
Mohammadreza


Re: Website testing opportunity

 

I wish you allowed people in the us to join the testing team

On 4/7/2017 5:45 PM, Shaun Everiss wrote:
I have sent you a direct mail, I have tested for a lot of people in the past but as is usual in the self employed freelance world I have, bar an ongoing contract or 2 with one or more companies I am fresh out of any projects so one more won't bother me much.

I have also just brought my system back up after a failier so I am fresh and ready to work.




On 7/04/2017 4:15 p.m., Juliette wrote:
Hello,

I am Juliette, the founder of Inclusight. I am helping websites being more
accessible for people with disabilities or people who struggle with
technology. In fact, we are offering website testing opportunities so that
people can give their feedback on the accessibility. We have opportunities
all over the UK. The average testing time is 45minutes and testers are
always rewarded for their feedback.
If you are interested to know more please let me know. Feel free to ask me
any questions you may have. The best way to contact me is to send me an
email at juliette@inclu-sight.com or to call me at 07760934012
About us: Inclusight is a registered company committed to make the web more
accessible. We comply with the Data Protection Act and the Market Research
Society Code of Conduct. If you are interested in becoming a tester, reply
to this email or call us at 07760934012.


I am looking forward to hearing from you.
Kind Regards,
Juliette


Re: mathematics + NVDA

Luke Scholey <lukescholey@...>
 

Hi
I would be interested in discussing this with you. I am a student using math type with nvda if that will help you at all?
Thanks
Luke Scholey

On 8 Apr 2017, at 17:12, Annemiek van Leendert <annemiekleendert@visio.org> wrote:

Hi,

I would like to get in contact with students who use NVDA when reading and comprehending

mathematical text . I want to discuss with you about your experiences and about ideas for improvements.

Annemiek






DISCLAIMER. De informatie verzonden met dit e-mailbericht is uitsluitend bestemd
voor de geadresseerde. Gebruik van deze informatie door anderen dan de
geadresseerde is verboden. Openbaarmaking, vermenigvuldiging,
verspreiding en/of verstrekking van deze informatie aan derden is niet
toegestaan. Visio staat niet in voor de juiste en volledige
overbrenging van de inhoud van een verzonden e-mail, noch voor tijdige
ontvangst daarvan.





Re: Laptop Layout issue

George McCoy <slr1bpz@...>
 

In keyboard help, control shift nvda speak when held down together but the arrow keys do not speak.

George

-----Original Message-----
From: Jacob Kruger
Sent: Friday, April 07, 2017 10:40 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Laptop Layout issue

First thing to do is turn on keyboard help - think it's also just NVDA +
number row 1 - to make sure that when you enter the other keystroke that
the correct one is being passed/recognised, etc.?


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-04-08 05:14, George McCoy wrote:
ESpeak


-----Original Message----- From: Rui Fontes
Sent: Friday, April 07, 2017 7:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Laptop Layout issue

What synth?

Rui


-----Mensagem Original----- De: George McCoy
Data: 8 de abril de 2017 00:56
Para: nvda@nvda.groups.io
Assunto: [nvda] Laptop Layout issue

HP EliteBook 8440P running windows 7 Professional with all updates. NVDA is
set to laptop layout. I can't set the voice parameters with
NVDA+Shift+Control and the arrow keys. Has anyone else encountered this
behavior? Is there a work-around?

Thanks,
George












mathematics + NVDA

Annemiek van Leendert
 

Hi,

I would like to get in contact with students who use NVDA when reading and comprehending

mathematical text . I want to discuss with you about your experiences and about ideas for improvements.

Annemiek






DISCLAIMER. De informatie verzonden met dit e-mailbericht is uitsluitend bestemd
voor de geadresseerde. Gebruik van deze informatie door anderen dan de
geadresseerde is verboden. Openbaarmaking, vermenigvuldiging,
verspreiding en/of verstrekking van deze informatie aan derden is niet
toegestaan. Visio staat niet in voor de juiste en volledige
overbrenging van de inhoud van een verzonden e-mail, noch voor tijdige
ontvangst daarvan.


Re: Free Music Production software

Marco Oros
 

Reaper is also very great, but with this Casio, I would like to prefer something another, maybe some arranger workstations from Yamaha.
You can contact me and We'll find solution.


Re: Free Music Production software

Ame
 

Oh, I’ve got another couple questions.  I don’t see a midi port anywhere on my Windows 8 machine.  I see USB’s and   others that look like USB’s but I forgot what those are called.  HDMI maybe?  Plus, does this software you recommended have effects?  Can you do reverb and a few basic things like that?
 
Thanks Mahammadreza.


Re: Free Music Production software

Ame
 

I don’t know.  As soon as I can  get someone to take a look for me I’ll be happy to tell you.  I love it.  It was a delightful surprise from a family member.  II’m a piano player and my actual piano is in disrepair.  It needs tuning and I’m not sure I could ever keep it in decent tune because our house is a little humid.  Anyway, she knew I  wanted to keep playing so she bought me my Casio.  Thanks so much for your reply


Re: Aria-live and interactive fiction

Felix G.
 

That's great news. Thank you!
Kind regards,
Felix Grützmacher
Sukil Etxenike via Groups.Io <sukiletxe=yahoo.es@groups.io> schrieb am Sa. 8. Apr. 2017 um 17:34:

Hi,

In the latest versions of both Windows Frotz and Windows Glulxe, speech can be stopped by pressing ctrl + Break.



El 08/04/2017 a las 11:01, Felix G. escribió:
Hi!
Since I'm a huge fan of IF myself, I was wondering if anyone could point me to a good interpreter for ZCode and Glulx games which works well with NVDA in terms of automatically announcing new text and interrupting when I press a key. Windows Frotz and Windows Glulxe do have built-in speech but that cannot be interrupted, and when using them without speech NVDA does not announce new content as it is printed even though I have installed an add-on for this. Any suggestions? Maybe just the add-on that needs updating?
Kind regards,
Felix

Shaun Everiss <sm.everiss@...> schrieb am Sa., 8. Apr. 2017 um 02:47 Uhr:
Not sure but parchment seems to be quite old now, it works well enough
especially for complex games for me if you don't use a glulx zcode or
tads interpreter offline which I do sometimes do this works really well.




On 7/04/2017 7:50 p.m., Sukil Etxenike via Groups.Io wrote:
> Hi,
>
> Lately I've been testing online interactive fiction interpreters. All
> these implement aria (precisely,aria-live="polite",
> aria-atomic="false", aria-relevant="additions"). The problem is that
> with some specific games (like Ad Verbum) NVDA fails to output
> anything automatically. Link to test this (with Parchment):
>
> adverbum - Parchment
> <http://iplayif.com/?story=http://ifarchive.org/if-archive/games/zcode/adverbum.z5>
>
>
>
>
> Anyone can clarify why this happens? Note that this is not specific to
> this game, but this only happens in Parchment (see
> <http://www.eblong.com/zarf/glulx/quixe/quixe/play-remote.html?story=stories/Advent.ulx.js>).
> That works properly...
>
> Even more weirdness: Andrew Plotkin uses an older version of Parchment
> with no ARIA, and it works surprisingly well (compare
> <http://eblong.com/zarf/zweb/tangle/> and
> <http://iplayif.com/?story=http://eblong.com/zarf/ftp/Tangle.z5>.
>
> Any thoughts?
>
> Thanks very much,
>
>
> Sukil
>
>
>






Re: Laptop Layout issue

George McCoy <slr1bpz@...>
 

-----Original Message-----
From: Jacob Kruger
Sent: Friday, April 07, 2017 10:40 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Laptop Layout issue

First thing to do is turn on keyboard help - think it's also just NVDA +
number row 1 - to make sure that when you enter the other keystroke that
the correct one is being passed/recognised, etc.?


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-04-08 05:14, George McCoy wrote:
ESpeak


-----Original Message----- From: Rui Fontes
Sent: Friday, April 07, 2017 7:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Laptop Layout issue

What synth?

Rui


-----Mensagem Original----- De: George McCoy
Data: 8 de abril de 2017 00:56
Para: nvda@nvda.groups.io
Assunto: [nvda] Laptop Layout issue

HP EliteBook 8440P running windows 7 Professional with all updates. NVDA is
set to laptop layout. I can't set the voice parameters with
NVDA+Shift+Control and the arrow keys. Has anyone else encountered this
behavior? Is there a work-around?

Thanks,
George












Re: Aria-live and interactive fiction

Sukil Etxenike <sukiletxe@...>
 

Hi,

In the latest versions of both Windows Frotz and Windows Glulxe, speech can be stopped by pressing ctrl + Break.



El 08/04/2017 a las 11:01, Felix G. escribió:
Hi!
Since I'm a huge fan of IF myself, I was wondering if anyone could point me to a good interpreter for ZCode and Glulx games which works well with NVDA in terms of automatically announcing new text and interrupting when I press a key. Windows Frotz and Windows Glulxe do have built-in speech but that cannot be interrupted, and when using them without speech NVDA does not announce new content as it is printed even though I have installed an add-on for this. Any suggestions? Maybe just the add-on that needs updating?
Kind regards,
Felix

Shaun Everiss <sm.everiss@...> schrieb am Sa., 8. Apr. 2017 um 02:47 Uhr:
Not sure but parchment seems to be quite old now, it works well enough
especially for complex games for me if you don't use a glulx zcode or
tads interpreter offline which I do sometimes do this works really well.




On 7/04/2017 7:50 p.m., Sukil Etxenike via Groups.Io wrote:
> Hi,
>
> Lately I've been testing online interactive fiction interpreters. All
> these implement aria (precisely,aria-live="polite",
> aria-atomic="false", aria-relevant="additions"). The problem is that
> with some specific games (like Ad Verbum) NVDA fails to output
> anything automatically. Link to test this (with Parchment):
>
> adverbum - Parchment
> <http://iplayif.com/?story=http://ifarchive.org/if-archive/games/zcode/adverbum.z5>
>
>
>
>
> Anyone can clarify why this happens? Note that this is not specific to
> this game, but this only happens in Parchment (see
> <http://www.eblong.com/zarf/glulx/quixe/quixe/play-remote.html?story=stories/Advent.ulx.js>).
> That works properly...
>
> Even more weirdness: Andrew Plotkin uses an older version of Parchment
> with no ARIA, and it works surprisingly well (compare
> <http://eblong.com/zarf/zweb/tangle/> and
> <http://iplayif.com/?story=http://eblong.com/zarf/ftp/Tangle.z5>.
>
> Any thoughts?
>
> Thanks very much,
>
>
> Sukil
>
>
>






Re: about nvda and triggers

 

thanks gene.
i should test it again.
saving changes in general settings is checked for me and i did not
deactivate it.

On 4/8/17, Gene <gsasner@ripco.com> wrote:
I've been experimenting and I found one more thing you may have to do.
After you set parameters as you want, if save on exit isn't enabled, you
have to save the configuration as you do in general when changing settings
if save on exit isn't enabled. Save on exit is the default so if you
haven't changed it, it is enabled.

Gene
----- original Message -----


From: Gene
Sent: Saturday, April 08, 2017 9:05 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] about nvda and triggers


I don't know the exact procedure you are following. It doesn't matter what
application you are in and you don't have to be in any to do this. Open the
profile dialog.
Create a new profile. After giving it a name, tab to the next field and
down arrow to say all. The profile will only be triggered when you use say
all and it will be triggered when you use say all in any program.

I'd have to create a profile to tell you the exact next steps. You will be
prompted to manually activate the profile to edit it. Do so, I believe
there is an ok or a yes button, I don't recall just what. Then set whatever
parameters you want. Once finished, open the profile dialog again and find
the profile in the list. Tab to the deactivate button and press it with the
space bar. Tab around and see if there is an ok button and activate it if
there is.

I'm not sure if you have to do anything more. I don't think so.
Gene


From: nasrin khaksar
Sent: Saturday, April 08, 2017 6:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] about nvda and triggers


hi quentin.
thanks so much for your reply.
but unfortunately this way does not work for me in the way that i expected!
now, nvda even does not say headings links etc by navigating with arrow
keys.
when i cant hear link when i use arrow keys how can i realize that its
a link and i should press enter to open the link!?
i only want nvda does not announce elements in web browsers in say
all! not always and using arrow keys!
i remember that i recieved the helpful reply previously in the list
but i dont remember that.
thanks extremely again and God bless you.

On 4/8/17, Quentin Christensen <quentin@nvaccess.org> wrote:
Say all does have its own profile now, so yes, you could edit just it, to
not announce any of the elements. To do that, open the configuration
dialog and manually load the "Say all" profile, edit it as desired and
save
it before returning to your normal profile.

Kind regards

Quentin.

On Sat, Apr 8, 2017 at 1:06 AM, Brian's Mail list account <
bglists@blueyonder.co.uk> wrote:

Is not say all a special class of profile now?

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Gene" <gsasner@ripco.com>
To: <nvda@nvda.groups.io>
Sent: Friday, April 07, 2017 4:05 PM

Subject: Re: [nvda] about nvda and triggers


I'd have to look at the create profile dialog again to see just how it
is
set up. Be sure it is set to manual and then, probably if you tab once
more, you will be in something, I thing a combo box, where you set a
trigger. You want it to only be triggered when you use read to end.
Find
that item, whatever it is exactly called. Then do the rest of the setup
for the profile.

Gene
----- Original Message -----

From: nasrin khaksar
Sent: Friday, April 07, 2017 8:06 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] about nvda and triggers


hi gene.
thanks so much for your help..
i did it, but now, even i dont hear links headings etc when i use the
arrow keys.
i wish that hear the elements but only when i use shortcut keys like k
and h and also when i navigate by arrow keys.
i only want to dont hear it in say all.
what should i do?

On 4/7/17, Gene New Zealand <hurrikennyandopo@outlook.co.nz> wrote:

Hi


I think the easiest way is to set up a profile with the reporting of
those things turned off. Where they need to be turned off is under the
document formatting section. But do not go there first it will need to
be done in the profile.


To set up a profile where you can do this and automatically have it
done
you need to do the following.


Go into your browser whether it be mozilla fire fox etc. make sure it
is
in focus.


Next Press the nvda key + ctrl key + the letter P


When the profile manager opens next tab to new it is a button press the
space bar on it. give it a name like mozilla fire fox with out
formatting then tab it will say some thing manual activation i could
have to check. Do not touch this one but arrow down to current
application it will say mozilla fire fox. Then tab down to the ok
button
then press the enter key.


Next bring up document formatting with the ctrl key + nvda key + the
letter D.


Tab down to where it says reporting of headings list etc and uncheck
those boxes then tab to the ok button then press the enter key.


You might have to go back into your pro file or hopefully it is still
in
focus locate the profile you set up then tab to the close button then
press the enter key.


If set correctly you should not hear link, heading list etc.


When you do it make sure you are in mozilla fire fox then bring up the
profile do your changes in document formatting then after done when
back
in the pro file tab to close just as mentioned.

I am pretty sure you will get the idea and other profiles can be set up
for other applications.


I find doing for a current application is far easier for a lot of
people.


Gene nz


I am pretty sure i gave the right directions.







On 7/04/2017 7:06 PM, nasrin khaksar wrote:

hello every one.
i remember that two years ago if i am correct, i asked this question
and recieved a great answer step by step.
but i dont remember the answer and the date which i asked it here.
i wish that when i use say all in firefox or any browser, nvda does
not announce link, heading table list and anything else.
i wish that only hear the document rather than link heading and all
elements.
you told me i should use trigger for this purpose.
how should i activate and use triggers for my goal?
i waite for your help, God bless you and i pray for you sincerely.





--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org







--
Quentin Christensen
Training and Support Manager

Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/

Ph +61 7 3149 3306
www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Re: about nvda and triggers

Gene
 

I've been experimenting and I found one more thing you may have to do.  After you set parameters as you want, if save on exit isn't enabled, you have to save the configuration as you do in general when changing settings if save on exit isn't enabled.  Save on exit is the default so if you haven't changed it, it is enabled. 
 
Gene
----- original Message -----

From: Gene
Sent: Saturday, April 08, 2017 9:05 AM
Subject: Re: [nvda] about nvda and triggers

I don't know the exact procedure you are following.  It doesn't matter what application you are in and you don't have to be in any to do this.  Open the profile dialog.
Create a new profile.  After giving it a name, tab to the next field and down arrow to say all.  The profile will only be triggered when you use say all and it will be triggered when you use say all in any program.
 
I'd have to create a profile to tell you the exact next steps.  You will be prompted to manually activate the profile to edit it.  Do so, I believe there is an ok or a yes button, I don't recall just what.  Then set whatever parameters you want.  Once finished, open the profile dialog again and find the profile in the list.  Tab to the deactivate button and press it with the space bar.  Tab around and see if there is an ok button and activate it if there is. 
 
I'm not sure if you have to do anything more.  I don't think so. 
Gene

Sent: Saturday, April 08, 2017 6:30 AM
Subject: Re: [nvda] about nvda and triggers

hi quentin.
thanks so much for your reply.
but unfortunately this way does not work for me in the way that i expected!
now, nvda even does not say headings links etc by navigating with arrow keys.
when i cant hear link when i use arrow keys how can i realize that its
a link and i should press enter to open the link!?
i only want nvda does not announce elements in web browsers in say
all! not always and using arrow keys!
i remember that i recieved the helpful reply previously in the list
but i dont remember that.
thanks extremely again and God bless you.

On 4/8/17, Quentin Christensen <quentin@...> wrote:
> Say all does have its own profile now, so yes, you could edit just it, to
> not announce any of the elements.  To do that, open the configuration
> dialog and manually load the "Say all" profile, edit it as desired and save
> it before returning to your normal profile.
>
> Kind regards
>
> Quentin.
>
> On Sat, Apr 8, 2017 at 1:06 AM, Brian's Mail list account <
> bglists@...> wrote:
>
>> Is not say all a special class of profile now?
>>
>> Brian
>>
>> bglists@...
>> Sent via blueyonder.
>> Please address personal email to:-
>> briang1@..., putting 'Brian Gaff'
>> in the display name field.
>> ----- Original Message ----- From: "Gene" <gsasner@...>
>> To: <nvda@nvda.groups.io>
>> Sent: Friday, April 07, 2017 4:05 PM
>>
>> Subject: Re: [nvda] about nvda and triggers
>>
>>
>> I'd have to look at the create profile dialog again to see just how it is
>> set up.  Be sure it is set to manual and then, probably if you tab once
>> more, you will be in something, I thing a combo box, where you set a
>> trigger.  You want it to only be triggered when you use read to end.
>> Find
>> that item, whatever it is exactly called.  Then do the rest of the setup
>> for the profile.
>>
>> Gene
>> ----- Original Message -----
>>
>> From: nasrin khaksar
>> Sent: Friday, April 07, 2017 8:06 AM
>> To: nvda@nvda.groups.io
>> Subject: Re: [nvda] about nvda and triggers
>>
>>
>> hi gene.
>> thanks so much for your help..
>> i did it, but now, even i dont hear links headings etc when i use the
>> arrow keys.
>> i wish that hear the elements but only when i use shortcut keys like k
>> and h and also when i navigate by arrow keys.
>> i only want to dont hear it in say all.
>> what should i do?
>>
>> On 4/7/17, Gene New Zealand <hurrikennyandopo@...> wrote:
>>
>>> Hi
>>>
>>>
>>> I think the easiest way is to set up a profile with the reporting of
>>> those things turned off. Where they need to be turned off is under the
>>> document formatting section. But do not go there first it will need to
>>> be done in the profile.
>>>
>>>
>>> To set up a profile where you can do this and automatically have it done
>>> you need to do the following.
>>>
>>>
>>> Go into your browser whether it be mozilla fire fox etc. make sure it is
>>> in focus.
>>>
>>>
>>> Next Press the nvda key + ctrl key + the letter P
>>>
>>>
>>> When the profile manager opens next tab to new it is a button press the
>>> space bar on it. give it a name like mozilla fire fox with out
>>> formatting then tab it will say some thing manual activation i could
>>> have to check. Do not touch this one but arrow down to current
>>> application it will say mozilla fire fox. Then tab down to the ok button
>>> then press the enter key.
>>>
>>>
>>> Next bring up document formatting with the ctrl key + nvda key + the
>>> letter D.
>>>
>>>
>>> Tab down to where it says reporting of headings list etc and uncheck
>>> those boxes then tab to the ok button then press the enter key.
>>>
>>>
>>> You might have to go back into your pro file or hopefully it is still in
>>> focus locate the profile you set up then tab to the close button then
>>> press the enter key.
>>>
>>>
>>> If set correctly you should not hear link, heading list etc.
>>>
>>>
>>> When you do it make sure you are in mozilla fire fox then bring up the
>>> profile do your changes in document formatting then after done when back
>>> in the pro file tab to close just as mentioned.
>>>
>>> I am pretty sure you will get the idea and other profiles can be set up
>>> for other applications.
>>>
>>>
>>> I find doing for a current application is far easier for a lot of
>>> people.
>>>
>>>
>>> Gene nz
>>>
>>>
>>> I am pretty sure i gave the right directions.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On 7/04/2017 7:06 PM, nasrin khaksar wrote:
>>>
>>>> hello every one.
>>>> i remember that two years ago if i am correct, i asked this question
>>>> and recieved a great answer step by step.
>>>> but i dont remember the answer and the date which i asked it here.
>>>> i wish that when i use say all in firefox or any browser, nvda does
>>>> not announce link, heading table list and anything else.
>>>> i wish that only hear the document rather than link heading and all
>>>> elements.
>>>> you told me i should use trigger for this purpose.
>>>> how should i activate and use triggers for my goal?
>>>> i waite for your help, God bless you and i pray for you sincerely.
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>
>> --
>> we have not sent you but as a mercy to the creation.
>> holy quran, chapter 21, verse 107.
>> in the very authentic narration is:
>> imam hosein is the beacon of light and the ark of salvation.
>> best website for studying islamic book in different languages
>> al-islam.org
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Quentin Christensen
> Training and Support Manager
>
> Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
> http://www.nvaccess.org/shop/
>
> Ph +61 7 3149 3306
> www.nvaccess.org
> Facebook: http://www.facebook.com/NVAccess
> Twitter: @NVAccess
>


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org