Date   

Re: NVDA not announcing paste or copy when using control-C or control-V

 

thanks gene for reminding about link which i sent and testing it.
i agree with you.
i wish that recieve such information by nvda directly without need to
install addon.

On 7/6/17, Dr. arvind singh brar <@Arvind> wrote:
There is an addon called fake clipboard copy

Hope it helps

This message is transmitted on 100% recycled electrons.

On Jul 5, 2017, at 9:44 PM, Don H <lmddh50@...> wrote:

This message is eligible for Automatic Cleanup! (lmddh50@...)
Add cleanup rule | More info
I was told earlier that no such add on exist to do what you want. One
short coming of NVDA is not being able to label keys.

On 7/5/2017 9:41 AM, Dan Thompson wrote:
Thanks so very much. What add on do I need and where can I find it.
I am very greatful for the help.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Andre
Fisher
Sent: Wednesday, July 05, 2017 9:40 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not announcing paste or copy when using
control-C or control-V
Did you install any add-ons? NVDA does not do this by default, unless you
are in browse mode, where it announces copied text.
On 7/5/17, Dan Thompson <dmt031073@...> wrote:
Hi everyone,

I have not been able to make NVDA consistently announce paste or copy
on the computers I am using in class with students.

My computer does, however, several of the 16 students I work with will
not.
Can someone guide me to the correct area in preferences? I thought
I'd went through everything. But obviously, I am missing something.

Thanks for any guidance in advance.


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Re: NVDA not announcing paste or copy when using control-C or control-V

Dr. arvind singh brar <arvindsinghbrar@...>
 

There is an addon called fake clipboard copy

Hope it helps

This message is transmitted on 100% recycled electrons.

On Jul 5, 2017, at 9:44 PM, Don H <lmddh50@...> wrote:

Boxbe This message is eligible for Automatic Cleanup! (lmddh50@...) Add cleanup rule | More info
I was told earlier that no such add on exist to do what you want.  One short coming of NVDA is not being able to label keys.

On 7/5/2017 9:41 AM, Dan Thompson wrote:
Thanks so very much. What add on do I need and where can I find it.
I am very greatful for the help.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Andre Fisher
Sent: Wednesday, July 05, 2017 9:40 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V
Did you install any add-ons? NVDA does not do this by default, unless you are in browse mode, where it announces copied text.
On 7/5/17, Dan Thompson <dmt031073@...> wrote:
Hi everyone,

I have not been able to make NVDA consistently announce paste or copy
on the computers I am using in class with students.

My computer does, however, several of the 16 students I work with will not.
Can someone guide me to the correct area in preferences?  I thought
I'd went through everything. But obviously, I am missing something.

Thanks for any guidance in advance.






Re: FW: [win10] Focus40 Blue With NVDA

 

Joseph,

           Somehow George's original query did not get carried over, but my reply did.  For the readership here, these are his questions:

                    Do they work together? USB or bluetooth? Is there a driver or BRLTTY?
--
Brian  Windows 10 Home, 64-Bit, Version 1703, Build 15063  (dot level on request - it changes too often to keep in signature)

     The opposite of a correct statement is a false statement.  But the opposite of a profound truth may well be another profound truth.

            Niels Bohr

 

 


FW: [win10] Focus40 Blue With NVDA

 

Hi,

Does anyone have any comments? Thanks.

 

From: win10@win10.groups.io [mailto:win10@win10.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, July 5, 2017 9:10 PM
To: win10@win10.groups.io
Subject: Re: [win10] Focus40 Blue With NVDA

 

George,

         Do you have NVDA installed?  If so, bring up the NVDA Menu, Help, User Guide and go to section 12.1 which covers the Freedom Scientific Focus and PAC Mate series and answers your questions in some detail.

          Otherwise I can cut and paste here, if necessary.
--
Brian  Windows 10 Home, 64-Bit, Version 1703, Build 15063  (dot level on request - it changes too often to keep in signature)

Like all weak men he laid an exaggerated stress on not changing one's mind.
   ~ Somerset Maugham

 


Re: Code Factory Vocalizer Disappearing

Fantasy Sports <fantasylife@...>
 

Sorry, it has taken me a while to get back to this issue.

Yes, the log file has some errors, and the Code Factory add-on didn't start this time.

ERROR - external:synthDrivers._cfnvdainterface._initalize (22:47:18):

AttributeError: 'NoneType' object has no attribute '_CallAfterId'

ERROR - synthDriverHandler.setSynth (22:47:18):

CodeFactoryException: C:\Users\Computer\AppData\Roaming\nvda\addons\codefactory\File\VocalizerNVDA.DLL is not valid

I'm not fully understanding how the log file works, and what it
keeps track of exactly. 

Is this the log file for the most recent running of NVDA? 

Also not sure what you mean by setting the log in level to input/output,
can you explain?

Thank you.  Hope this log file helps you understand what went wrong.

-----Original Message-----
From: Chris Mullins
Sent: May 16, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory Vocalizer Disappearing

Does the NVDA log file give any messages indicating why it has failed to load the Vocalizer voice?  Try setting the loggin level to input/output to see if any messages are output.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Fantasy Sports
Sent: 16 May 2017 05:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory Vocalizer Disappearing

 

It is set to automatically save the configuration on exit, and I have also clicked

"save configuration" during my sessions.

 

Thank you for trying, but that can't be the answer I dont think.

-----Original Message-----
From: Chris
Sent: May 15, 2017 1:47 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory Vocalizer Disappearing


It sounds like you are not saving the settings before you exit nvda

If you open the nvda menu and select save configuration after you have set it to the code factory synth

That should solve the issue

 

 

From: Fantasy Sports
Sent: 15 May 2017 19:02
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory Vocalizer Disappearing

 

I don't get that message, I just hear the default voice that NVDA comes with originally

instead of the Vocalizer voice.

 

Then i activate and it works until the next random reboot.

-----Original Message-----
From: Chris
Sent: May 15, 2017 9:37 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory Vocalizer Disappearing



Hello

 

When you start the computer and nvda runs Do you get the message its not activated?

Or you just assuming its not activated for whatever reason?

 

And you have entered the key correctly with no more than three activationsper key

 

Then I suggest contact code factory regarding this issue to see if they can help

 

 

 


Re: font attributes not announced

Gene New Zealand <hurrikennyandopo@...>
 

Hi Jim


If i remember right there is a menu for the vocaliser voice and off that is a area where you can put in your number to register it. this is from the main nvda menu.

You just arrow down from preferences then you will see the menu then the sub menu will come off it.


Gene nz



On 7/5/2017 11:09 PM, The Gamages wrote:
Hello again Gene,
That all went well, thank you, now I have just installed one of my Vocalizer voices and the driver, not showing in the synths, I probably need to put my license in here but have forgotten how to do it,any help with this please, then I will leave you in peace, thanks.
 
Best Regards, Jim.
 
Sent: Wednesday, July 05, 2017 10:05 AM
Subject: Re: [nvda] font attributes not announced
 

hi

 

Just make sure when you go to do it under that section it is for the NVDA folder. In that section you will notice other folders they have settings in them for other programs do not touch them.

 

gene nz

 


On 7/5/2017 8:09 PM, Gene New Zealand wrote:

Hi Jim

It should only uninstall the appdata where the settings are kept which is for the installer version. Usually if I have a good working portable copy, I will uninstall the installer version of NVDA then remove the appdata. Sometimes it is wise to reboot the computer so that all those settings are gone. Then, reinstall NVDA from the good portable copy of NVDA. There is a menu for it under tools, to do the installer version from your portable copy. Just follow the directions to install it. Is your portable version just the exe version on a USB stick or did you make a directory and make a shortcut to start it? When you remove the one from appdata it won't affect the portable version that you are using.

Gene NZ


On 7/5/2017 7:34 PM, The Gamages wrote:
Hello Gene,
 
Yes the portable copy works for the font stuff.
Just to clarify, if I do as you say, is this going to uninstall NVDA? or just the appdata, I believe that, if I just uninstalled NVDA and then re installed it, I would have the same problem because my app data will still be there, I can certainly do as you say but will need to be prepared for NVDA not to work and have another screen reader ready so that I can install NVDA again. .
 
Sorry if I sound thick, but I would like to know what I am getting myself into.
 
Thank you for your help, much appreciated.
 
Best Regards, Jim.
 
Sent: Wednesday, July 05, 2017 8:18 AM
Subject: Re: [nvda] font attributes not announced
 

Hi

 

If you want to delete the app data? for nvda press the windows key and the letter R then type %appdata% then press the enter key.

 

one of the folders will be for nvda. you can either delete it out or go into the folder locate the nvda.ini file then rename it old which some do but find it easier just to delete the directory. Then use the alt  f4 key to close that window. then reinstall from the portable copy..

 

does the font stuff work on the portable copy correctly?

 

gene nz

 


On 7/5/2017 7:01 PM, The Gamages wrote:
Hello,

The portable copy worked, I have shown hidden files etc and found
program data on the c drive, but no mention of NVDA in here at all,
anything I am doing wrong?

Thank you for further comments.



Best Regards, Jim.
-----Original Message----- 
From: Shaun Everiss
Sent: Monday, July 03, 2017 9:22 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] font attributes not announced

Well make a portable coppy of nvda and run it.

then go to %appdata% find the nvda folder and nuke it.

next uninstall and reinstall nvda but the first option should wipe your
settings.

I had issues with flash fxp that just didn't work, and I just ended up
removing the settings file folder which came from older backups, redid
the settings and put that back in.




On 4/07/2017 2:56 a.m., The Gamages wrote:
Hello folks,

I’m using ther latest NVDA and Windows ten with the creator’s update
etc,
in any word processor, that’s Word, Writer in Libre office, Wordpad or
Notepad, insert and F gives me the message,”no formatting information”,
is
ther a way of repairing an installed version of NVDA: or do I need to
uninstall and re install a fresh copy?
I should say that this was happening before the Creator’s update.
All works well on my Windows seven system.
Any comments greatly appreciated.
Best Regards, Jim.


--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Addons under development

Antony Stone
 

I'm slightly surprised that this appears to be a serious question (do you
*really* think that NVaccess would facilitate the official distribution of
addons containing malware code?)

However, https://addons.nvda-project.org/processes.en.html outlines the
process all addons have to go through before being approved for publication on
the site. You will notice that item 3 includes "security implications".

Only addons which pass step 4 are then released as "development" versions.


Regards,

Antony.

On Thursday 06 July 2017 at 01:05:50, Don H wrote:

When a add on is classified as a Addons under development has it been
screened at all for malware or virus? In other words is it simply a
case that they may have bugs?
--
Most people have more than the average number of legs.

Please reply to the list;
please *don't* CC me.


Re: Addons under development

Gene
 

Add ons classified as under development wouldn't be made publicly available if they had malware.  I would expect that some add ons classified as under development and in the under development section would have bugs.  but on the official NVDA add ons page, whether under development or not, those who work on and develop NVDA wouldn't make malicious add ons available for public use under any circumstances. 
 
Gene

----- Original Message -----
From: Don H
Sent: Wednesday, July 05, 2017 6:05 PM
Subject: [nvda] Addons under development

When a add on is classified as a Addons under development has it been
screened at all for malware or virus?  In other words is it simply a
case that they may have bugs?



Addons under development

Don H
 

When a add on is classified as a Addons under development has it been screened at all for malware or virus? In other words is it simply a case that they may have bugs?


Re: NVDA not announcing paste or copy when using control-C or control-V

Gene
 

Yes.  That's a different question. 
 
Gene

----- Original Message -----
Sent: Wednesday, July 05, 2017 5:54 PM
Subject: Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V

I have used it and what I see I like so wanted to know WY it is not
declared as stable?   hope this helps?

On 05/07/2017 23:11, Gene wrote:
> But are you going to wait to use it until then or are you just asking?
> Gene
> ----- Original Message -----
> *From:* Kevin Cussick via Groups.Io
> <mailto:the.big.white.shepherd@...>
> *Sent:* Wednesday, July 05, 2017 4:56 PM
> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> *Subject:* Re: [nvda] NVDA not announcing paste or copy when using
> control-C or control-V
>
> agreed,   and this is why I was asking when it will be declared as stable.
>
> On 05/07/2017 22:51, Gene wrote:
>  > I have had no problems using the add on.  I've used it a number of times
>  > today.  Just because something is not designated as stable doesn't
>  > necessarily mean that it won't work well.
>  > Gene
>  > ----- Original Message -----
>  > *From:* Kevin Cussick via Groups.Io
>  > <mailto:the.big.white.shepherd@...>
>  > *Sent:* Wednesday, July 05, 2017 4:42 PM
>  > *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> <mailto:nvda@nvda.groups.io>
>  > *Subject:* Re: [nvda] NVDA not announcing paste or copy when using
>  > control-C or control-V
>  >
>  > clipspeak is an addon not stable yet and this brings me to ask when will
>  > this be declared as a stable addon?
>  >
>  > On 05/07/2017 15:44, Don H wrote:
>  >  > I was told earlier that no such add on exist to do what you want. One
>  >  > short coming of NVDA is not being able to label keys.
>  >  >
>  >  > On 7/5/2017 9:41 AM, Dan Thompson wrote:
>  >  >> Thanks so very much. What add on do I need and where can I find it.
>  >  >> I am very greatful for the help.
>  >  >>
>  >  >> -----Original Message-----
>  >  >> From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> <mailto:nvda@nvda.groups.io>
>  > [mailto:nvda@nvda.groups.io] On Behalf Of
>  >  >> Andre Fisher
>  >  >> Sent: Wednesday, July 05, 2017 9:40 AM
>  >  >> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> <mailto:nvda@nvda.groups.io>
>  > >> Subject: Re: [nvda] NVDA not announcing paste or copy when using
>  >  >> control-C or control-V
>  > >>
>  >  >> Did you install any add-ons? NVDA does not do this by default, unless
>  >  >> you are in browse mode, where it announces copied text.
>  >  >>
>  >  >> On 7/5/17, Dan Thompson <dmt031073@...
> <mailto:dmt031073@...>
>  > <mailto:dmt031073@...>> wrote:
>  >  >>> Hi everyone,
>  > >>>
>  >  >>> I have not been able to make NVDA consistently announce paste or
> copy
>  >  >>> on the computers I am using in class with students.
>  >  >>>
>  > >>> My computer does, however, several of the 16 students I work with
>  >  >>> will not.
>  >  >>> Can someone guide me to the correct area in preferences?  I thought
>  > >>> I'd went through everything. But obviously, I am missing something.
>  >  >>>
>  >  >>> Thanks for any guidance in advance.
>  >  >>>
>  > >>>
>  >  >>
>  >  >>
>  > >>
>  >  >>
>  >  >>
>  > >>
>  >  >>
>  >  >>
>  > >
>  >  >
>  >  >
>  >
>  >
>  >
>
>
>



Re: NVDA not announcing paste or copy when using control-C or control-V

Kevin Cussick
 

I have used it and what I see I like so wanted to know WY it is not declared as stable? hope this helps?

On 05/07/2017 23:11, Gene wrote:
But are you going to wait to use it until then or are you just asking?
Gene
----- Original Message -----
*From:* Kevin Cussick via Groups.Io <mailto:the.big.white.shepherd=googlemail.com@groups.io>
*Sent:* Wednesday, July 05, 2017 4:56 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V
agreed, and this is why I was asking when it will be declared as stable.
On 05/07/2017 22:51, Gene wrote:
> I have had no problems using the add on. I've used it a number of times
> today. Just because something is not designated as stable doesn't
> necessarily mean that it won't work well.
> Gene
> ----- Original Message -----
> *From:* Kevin Cussick via Groups.Io
> <mailto:the.big.white.shepherd=googlemail.com@groups.io>
> *Sent:* Wednesday, July 05, 2017 4:42 PM
> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<mailto:nvda@nvda.groups.io>
> *Subject:* Re: [nvda] NVDA not announcing paste or copy when using
> control-C or control-V
>
> clipspeak is an addon not stable yet and this brings me to ask when will
> this be declared as a stable addon?
>
> On 05/07/2017 15:44, Don H wrote:
> > I was told earlier that no such add on exist to do what you want. One
> > short coming of NVDA is not being able to label keys.
> >
> > On 7/5/2017 9:41 AM, Dan Thompson wrote:
> >> Thanks so very much. What add on do I need and where can I find it.
> >> I am very greatful for the help.
> >>
> >> -----Original Message-----
> >> From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<mailto:nvda@nvda.groups.io>
> [mailto:nvda@nvda.groups.io] On Behalf Of
> >> Andre Fisher
> >> Sent: Wednesday, July 05, 2017 9:40 AM
> >> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<mailto:nvda@nvda.groups.io>
> >> Subject: Re: [nvda] NVDA not announcing paste or copy when using
> >> control-C or control-V
> >>
> >> Did you install any add-ons? NVDA does not do this by default, unless
> >> you are in browse mode, where it announces copied text.
> >>
> >> On 7/5/17, Dan Thompson <dmt031073@...
<mailto:dmt031073@...>
> <mailto:dmt031073@...>> wrote:
> >>> Hi everyone,
> >>>
> >>> I have not been able to make NVDA consistently announce paste or
copy
> >>> on the computers I am using in class with students.
> >>>
> >>> My computer does, however, several of the 16 students I work with
> >>> will not.
> >>> Can someone guide me to the correct area in preferences? I thought
> >>> I'd went through everything. But obviously, I am missing something.
> >>>
> >>> Thanks for any guidance in advance.
> >>>
> >>>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
>
>
>


Re: NVDA not announcing paste or copy when using control-C or control-V

Gene
 

But are you going to wait to use it until then or are you just asking?
 
Gene

----- Original Message -----
Sent: Wednesday, July 05, 2017 4:56 PM
Subject: Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V

agreed,   and this is why I was asking when it will be declared as stable.

On 05/07/2017 22:51, Gene wrote:
> I have had no problems using the add on.  I've used it a number of times
> today.  Just because something is not designated as stable doesn't
> necessarily mean that it won't work well.
> Gene
> ----- Original Message -----
> *From:* Kevin Cussick via Groups.Io
> <mailto:the.big.white.shepherd@...>
> *Sent:* Wednesday, July 05, 2017 4:42 PM
> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> *Subject:* Re: [nvda] NVDA not announcing paste or copy when using
> control-C or control-V
>
> clipspeak is an addon not stable yet and this brings me to ask when will
> this be declared as a stable addon?
>
> On 05/07/2017 15:44, Don H wrote:
>  > I was told earlier that no such add on exist to do what you want.  One
>  > short coming of NVDA is not being able to label keys.
>  >
>  > On 7/5/2017 9:41 AM, Dan Thompson wrote:
>  >> Thanks so very much. What add on do I need and where can I find it.
>  >> I am very greatful for the help.
>  >>
>  >> -----Original Message-----
>  >> From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> [mailto:nvda@nvda.groups.io] On Behalf Of
>  >> Andre Fisher
>  >> Sent: Wednesday, July 05, 2017 9:40 AM
>  >> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>  >> Subject: Re: [nvda] NVDA not announcing paste or copy when using
>  >> control-C or control-V
>  >>
>  >> Did you install any add-ons? NVDA does not do this by default, unless
>  >> you are in browse mode, where it announces copied text.
>  >>
>  >> On 7/5/17, Dan Thompson <dmt031073@...
> <mailto:dmt031073@...>> wrote:
>  >>> Hi everyone,
>  >>>
>  >>> I have not been able to make NVDA consistently announce paste or copy
>  >>> on the computers I am using in class with students.
>  >>>
>  >>> My computer does, however, several of the 16 students I work with
>  >>> will not.
>  >>> Can someone guide me to the correct area in preferences?  I thought
>  >>> I'd went through everything. But obviously, I am missing something.
>  >>>
>  >>> Thanks for any guidance in advance.
>  >>>
>  >>>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >
>  >
>  >
>
>
>



Re: NVDA not announcing paste or copy when using control-C or control-V

Kevin Cussick
 

agreed, and this is why I was asking when it will be declared as stable.

On 05/07/2017 22:51, Gene wrote:
I have had no problems using the add on. I've used it a number of times today. Just because something is not designated as stable doesn't necessarily mean that it won't work well.
Gene
----- Original Message -----
*From:* Kevin Cussick via Groups.Io <mailto:the.big.white.shepherd=googlemail.com@groups.io>
*Sent:* Wednesday, July 05, 2017 4:42 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V
clipspeak is an addon not stable yet and this brings me to ask when will
this be declared as a stable addon?
On 05/07/2017 15:44, Don H wrote:
> I was told earlier that no such add on exist to do what you want. One
> short coming of NVDA is not being able to label keys.
>
> On 7/5/2017 9:41 AM, Dan Thompson wrote:
>> Thanks so very much. What add on do I need and where can I find it.
>> I am very greatful for the help.
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
[mailto:nvda@nvda.groups.io] On Behalf Of
>> Andre Fisher
>> Sent: Wednesday, July 05, 2017 9:40 AM
>> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>> Subject: Re: [nvda] NVDA not announcing paste or copy when using
>> control-C or control-V
>>
>> Did you install any add-ons? NVDA does not do this by default, unless
>> you are in browse mode, where it announces copied text.
>>
>> On 7/5/17, Dan Thompson <dmt031073@...
<mailto:dmt031073@...>> wrote:
>>> Hi everyone,
>>>
>>> I have not been able to make NVDA consistently announce paste or copy
>>> on the computers I am using in class with students.
>>>
>>> My computer does, however, several of the 16 students I work with
>>> will not.
>>> Can someone guide me to the correct area in preferences? I thought
>>> I'd went through everything. But obviously, I am missing something.
>>>
>>> Thanks for any guidance in advance.
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>


Re: NVDA not announcing paste or copy when using control-C or control-V

Gene
 

I have had no problems using the add on.  I've used it a number of times today.  Just because something is not designated as stable doesn't necessarily mean that it won't work well. 
 
Gene

----- Original Message -----
Sent: Wednesday, July 05, 2017 4:42 PM
Subject: Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V

clipspeak is an addon not stable yet and this brings me to ask when will
this be declared as a stable addon?

On 05/07/2017 15:44, Don H wrote:
> I was told earlier that no such add on exist to do what you want.  One
> short coming of NVDA is not being able to label keys.
>
> On 7/5/2017 9:41 AM, Dan Thompson wrote:
>> Thanks so very much. What add on do I need and where can I find it.
>> I am very greatful for the help.
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
>> Andre Fisher
>> Sent: Wednesday, July 05, 2017 9:40 AM
>> To: nvda@nvda.groups.io
>> Subject: Re: [nvda] NVDA not announcing paste or copy when using
>> control-C or control-V
>>
>> Did you install any add-ons? NVDA does not do this by default, unless
>> you are in browse mode, where it announces copied text.
>>
>> On 7/5/17, Dan Thompson <dmt031073@...> wrote:
>>> Hi everyone,
>>>
>>> I have not been able to make NVDA consistently announce paste or copy
>>> on the computers I am using in class with students.
>>>
>>> My computer does, however, several of the 16 students I work with
>>> will not.
>>> Can someone guide me to the correct area in preferences?  I thought
>>> I'd went through everything. But obviously, I am missing something.
>>>
>>> Thanks for any guidance in advance.
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>



Re: NVDA not announcing paste or copy when using control-C or control-V

Kevin Cussick
 

clipspeak is an addon not stable yet and this brings me to ask when will this be declared as a stable addon?

On 05/07/2017 15:44, Don H wrote:
I was told earlier that no such add on exist to do what you want. One short coming of NVDA is not being able to label keys.
On 7/5/2017 9:41 AM, Dan Thompson wrote:
Thanks so very much. What add on do I need and where can I find it.
I am very greatful for the help.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Andre Fisher
Sent: Wednesday, July 05, 2017 9:40 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V

Did you install any add-ons? NVDA does not do this by default, unless you are in browse mode, where it announces copied text.

On 7/5/17, Dan Thompson <dmt031073@...> wrote:
Hi everyone,

I have not been able to make NVDA consistently announce paste or copy
on the computers I am using in class with students.

My computer does, however, several of the 16 students I work with will not.
Can someone guide me to the correct area in preferences? I thought
I'd went through everything. But obviously, I am missing something.

Thanks for any guidance in advance.








Introducing Enhanced Touch Gestures 17.07 #addonrelease

 

Hi all,

 

I’m delighted to announce the immediate release of Enhanced Touch Gestures version 17.07 (aka Project Ailee). Version 17.07 of this touchscreen add-on for NVDA packs tons of new features and changes, some of which are documented below.

 

The new version can be found at:

https://github.com/josephsl/enhancedTouchGestures/releases/tag/17.07

 

Notable additions include:

  • Touch command passthrough: there are times when you need to interact directly with a touchscreen as though NVDA is not running. You can now do so by doing two things: assign a command to a script that turns on touch passthrough (you can find this under Input Gestures dialog), then go to a new dialog named Touch Interaction in NVDA preferences menu and configure “pause NVDA’s touch commands” option between 3 and 10 seconds (default is 5).
  • Touch keyboard and standard versus touch typing: In iOS and certain other platforms, when pressing keys on the touch keyboard, you have an option between touch typing versus standard typing where you perform double tap or lift your finger to press keys, respectively. After installing version 17.07 of Enhanced Touch Gestures, standard typing will be in effect. To change back to touch typing, open Touch Interaction dialog and check “touch typing” checkbox.
  • Due to changes made in NVDA, this add-on will now require NVDA 2017.1 or later.

 

Known issues: Touch Interaction may appear under NVDA preferences menu on computers with no touch support. I plan to fix this as part of 17.07.1.

 

Enjoy.

Cheers,

Joseph


Re: query

Andre Fisher
 

There are descriptions of each add-on on the web site.

On 7/5/17, anthony borg <anthonyborg001@...> wrote:
Thanks very much brian for your help, but that problem has been resolved.

All the best

Anthony

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account via Groups.Io
Sent: 05 July 2017 09:56
To: nvda@nvda.groups.io
Subject: Re: [nvda] query

I don't know what the first part of your query refers to exactly. However
when you look at the manual it should open in your default browser straight
from the menu option.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "anthony borg" <anthonyborg001@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 04, 2017 8:08 AM
Subject: [nvda] query


Hi list



Can someone explain to me the use of the virtual version 2.1 and if it is

of
any use to me from where I can download it please?



I also can't access the NVDA manual from the general menu, can somebody
explain to me what I should do please?



Thanks in advance



Anthony












Re: query

anthony borg
 

Thanks very much brian for your help, but that problem has been resolved.

All the best

Anthony

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account via Groups.Io
Sent: 05 July 2017 09:56
To: nvda@nvda.groups.io
Subject: Re: [nvda] query

I don't know what the first part of your query refers to exactly. However
when you look at the manual it should open in your default browser straight
from the menu option.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "anthony borg" <anthonyborg001@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 04, 2017 8:08 AM
Subject: [nvda] query


Hi list



Can someone explain to me the use of the virtual version 2.1 and if it is
of
any use to me from where I can download it please?



I also can't access the NVDA manual from the general menu, can somebody
explain to me what I should do please?



Thanks in advance



Anthony






Re: query

anthony borg
 

Hi gene

 

Yes, you are correct, I think that’s what referred to, the virtualize add-ons.

 

But these things are completely new for me,I don’t even know what’s there use.

 

Thanks in advance for your help

 

Anthony  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: 05 July 2017 15:42
To: nvda@nvda.groups.io
Subject: Re: [nvda] query

 

It is evidently referring to an add on.  But which one?  If the person doesn't know the exact name, what does it do?  I think I read recently that there is a virtualize window add on.  Is that what is being referred to?

 

Gene

----- Original Message -----

Sent: Wednesday, July 05, 2017 2:56 AM

Subject: Re: [nvda] query

 

I don't know what the first part of your query refers to exactly. However
when you look at the manual it should open in your default browser straight
from the menu option.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "anthony borg" <anthonyborg001@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 04, 2017 8:08 AM
Subject: [nvda] query


> Hi list
>
>
>
> Can someone explain to me the use of the virtual version 2.1 and if it is
> of
> any use to me from where I can download it please?
>
>
>
> I also can't access the NVDA manual from the general menu, can somebody
> explain to me what I should do please?
>
>
>
> Thanks in advance
>
>
>
> Anthony
>
>
>
>
>
>



Re: NVDA not announcing paste or copy when using control-C or control-V

Dan Thompson
 

Hi Gene

I did find the link to the add-in and am going to try it today. Thank you.

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Wednesday, July 05, 2017 10:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not announcing paste or copy when using control-C or control-V

 

I just tried the add on.  I didn't test it thoroughly but it worked correctly when I tested it in Notepad and when copying a file to the clipboard.  As I've said for a long time, if JAWS and System Access can do this, and know when material is actually being copied, pasted, etc., then I doubt it is that difficult to do. 

 

My impression over the years is that it is a matter of ideology for the main developer or developers.  They claim that a screen-reader shouldn't give information that is not available to sighted users.  That may be true in general.  But ideology, when too rigidly held to, produces undesirable results at times.  And I'd bet that sighted people do get some sort of notice.  I don't know what it is.  Does the material appear different in some way or does something else happen?  At any rate, finally, this is being addressed through an add on, though it should be in NVDA itself. 

 

I would say, regarding the add on itself, that the word text and item are unnecessary.  The user should know whether he/she is copying text or a file.  I don't want to be told what I should already know. 

 

Gene 

----- Original Message -----

Gene

------ Original Message -----
> hi.
> i found one addon for nvda.
> but this addon is under developement and for myself, i dont use any addon.
> by default, when you are in brows mode like mozilla firefox or
> internet explorer, nvda announces when you copy some parts of page.
> but for other jubs, test this addon.
> hope that help and God bless you!
>
> https://addons.nvda-project.org/addons/clipspeak.en.html
>
> On 7/5/17, Dan Thompson <dmt031073@...> wrote:
>> Thank you very much.
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Don H
>> Sent: Wednesday, July 05, 2017 9:44 AM
>> To: nvda@nvda.groups.io
>> Subject: Re: [nvda] NVDA not announcing paste or copy when using
>> control-C
>> or control-V
>>
>> I was told earlier that no such add on exist to do what you want.  One
>> short
>> coming of NVDA is not being able to label keys.
>>
>> On 7/5/2017 9:41 AM, Dan Thompson wrote:
>>> Thanks so very much. What add on do I need and where can I find it.
>>> I am very greatful for the help.
>>>
>>> -----Original Message-----
>>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
>>> Andre Fisher
>>> Sent: Wednesday, July 05, 2017 9:40 AM
>>> To: nvda@nvda.groups.io
>>> Subject: Re: [nvda] NVDA not announcing paste or copy when using
>>> control-C or control-V
>>>
>>> Did you install any add-ons? NVDA does not do this by default, unless
>>> you
>>> are in browse mode, where it announces copied text.
>>>
>>> On 7/5/17, Dan Thompson <dmt031073@...> wrote:
>>>> Hi everyone,
>>>>
>>>> I have not been able to make NVDA consistently announce paste or copy
>>>> on the computers I am using in class with students.
>>>>
>>>> My computer does, however, several of the 16 students I work with will
>>>> not.
>>>> Can someone guide me to the correct area in preferences?  I thought
>>>> I'd went through everything. But obviously, I am missing something.
>>>>
>>>> Thanks for any guidance in advance.
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> we have not sent you but as a mercy to the creation.
> holy quran, chapter 21, verse 107.
> in the very authentic narration is:
> imam hosein is the beacon of light and the ark of salvation.
> best website for studying islamic book in different languages
> al-islam.org
>


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org