Date   

Re: OE Classic is more accessible. Developers test with NVDA.

Gene
 

It was not a mess for accessibility.  I use it.  Are you saying that because you don't like ribbons?  That has nothing to do with accessibility.  That is your opinion of ribbons. 
 
Gene

----- Original Message -----
Sent: Wednesday, July 26, 2017 11:31 AM
Subject: Re: [nvda] OE Classic is more accessible. Developers test with NVDA.

Mind you we should not forget that the email client bundled with windows 7
was really a mess for accessibility in itself, and I have a sneaky suspicion
that  the OE classic looks a lot like that did.
 And look at the hoops we have gone through for the one in windows 10, which
is just a bog standard email app.

Why it seems to be so awkward for people to make email clients better than
Tbird when they can write stuff like Firefox and Chrome escapes me.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, July 26, 2017 2:39 PM
Subject: Re: [nvda] OE Classic is more accessible. Developers test with
NVDA.


More accessible than very little.

Gene
----- Original Message -----

From: Walker, Michael E
Sent: Wednesday, July 26, 2017 8:21 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] OE Classic is more accessible. Developers test with
NVDA.


More accessible than what?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Robert
Kingett
Sent: Wednesday, July 26, 2017 8:28 AM
To: nvda@nvda.groups.io
Subject: [nvda] OE Classic is more accessible. Developers test with NVDA.

Below is a blog post on OE Classic and it's accessibility improvements.
While this email client is getting more accessible it still has a ways to
go. It runs on Windows 7 and up.

https://blindjournalist.wordpress.com/2017/07/25/oe-classic-is-2-7-is-finally-free-and-more-accessible/












Re: Footnotes in Word Documents

James AUSTIN
 

Hi Ralph

I have just performed a very quick test. NVDA seems to read the two footnotes I have created without a delay. They were not long, nor did they spread across pages. I could create something, but would you be willing to share a copy of your document with me please? Perhaps we can work out together what is going on?

Thanks

James

On 27/07/2017 15:32, Ralph Boersema wrote:
Is this only my problem or do others have it too? I ask because no one has commented.

Ralph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Ralph Boersema
Sent: Wednesday, July 26, 2017 8:35 AM
To: nvda@nvda.groups.io
Subject: [nvda] Footnotes in Word Documents

Dear Friends,

NVDA navigates footnotes in MSWord documents with distressingly long delays. Is there any cure for this?

Warmly,
Ralph






Re: Footnotes in Word Documents

Ralph Boersema
 

Is this only my problem or do others have it too? I ask because no one has commented.

Ralph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Ralph Boersema
Sent: Wednesday, July 26, 2017 8:35 AM
To: nvda@nvda.groups.io
Subject: [nvda] Footnotes in Word Documents

Dear Friends,

NVDA navigates footnotes in MSWord documents with distressingly long delays. Is there any cure for this?

Warmly,
Ralph


Re: how can i get microsoft spi5engine

Gene
 

First, did you reboot?  If so and it didn't solve the problem, System Restore would very likely fix it.  It may be too much to hope for, most of the time when I suggest using system restore, it either isn't turned on on the users' machine or it isn't working properly.  
Far more often than a problem with how it works, it isn't turned on.  I hope it is in your case.  Unless people have some other reversion program, I consider it essential to have System Restore on.  If you do, you could run a restore point from before the problem started. 
 
Also, what do you mean by SPI?  Do you mean SAPI?  Gene? 
There may be a way to repair MSAPI5. 
 
Also, it may be that nothing is wrong with SAPI5.  I would think that a general message such as unable to load synth could mean that there is a problem with what3ever synthesizer is being used.  A synthesizer is not the same as SAPI.  SAPI is an application program interface that will run any synthesizer that is designed to run using SAPI.  So the actual premise of your question, that SAPI is corrupt or nonexistent if not at all certain.  What synthesizer are you using?  Because of the various possibilities and considerations I've discussed, System Restore, as reluctant as many people are to use it, may well be the fastest and easiest way to solve the problem.  People often cause themselves a lot of unnecessary problems because they don't want to run System Restore.  There is a certain amount of risk in running it, just as there is in running any program that works with files in such ways, but most of the time, if it works, it works properly.  If it can't work properly, most of the time, it lets your system finish booting and displays a message that it couldn't restore it and that your system has been unchanged.   
 
Gene
----- Original Message -----

From: Tony James
Sent: Thursday, July 27, 2017 12:07 AM
Subject: [nvda] how can i get microsoft spi5engine

hi all, i don't no how this happened, but the spi5 tts seems to have
disappeared from my win7 laptop.  whenever i try to select the tts
engine from the nvda synthesizer dialog, it says, cannot load the synth.
any ideas?  thx




Re: NVDA Newbie

 

Hi ndy,

I am an nvda newbi  too 

Try pressing the nvda plus number 2and nvda  plus number 3 key to toggle between say characters and say words,
Hope that helps 
Arvind

This message is transmitted on 100% recycled electrons.

On Jul 26, 2017, at 10:39 AM, Andy <wq6r@...> wrote:

Boxbe This message is eligible for Automatic Cleanup! (wq6r@...) Add cleanup rule | More info
I use JAWS as my primary screen reader, but have begun using NVDA now that I have installed the Elequence and Vocalizer voices.
Does NVDA have a "read all" command like JAWS? and how do I get the keyboard to echo words rather than every character?
 
Thanks,
Andy
 


Reading ggogle docs sheets with nvda

Sylvie Duchateau
 

Hello all,
Has anyone tips on how to read google doc sheets with NVDA without editing them ?
When connecting to the document, I receive the message that I have to press a short cut to have it work with screen readers.
But then I don't how to have NVDA tell me the title of each cell.
Thank you for any tips on using this.
Best
Sylvie


Re: test

Brian's Mail list account <bglists@...>
 

Well they have been coming. I suspect you might soon get a bounce message. It might be worth going to the web site and checking what your settings actually are there.
I think there have been issues with one of the groups.io servers getting on a black list.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Don H" <lmddh50@comcast.net>
To: <nvda@nvda.groups.io>
Sent: Thursday, July 27, 2017 12:24 AM
Subject: [nvda] test


Haven't seen any messages from this list of late.


Re: OE Classic is more accessible. Developers test with NVDA.

Brian's Mail list account <bglists@...>
 

Yes thought so, and when its all working well I'd pay to use it.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Robert Kingett" <kingettr@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, July 26, 2017 6:21 PM
Subject: Re: [nvda] OE Classic is more accessible. Developers test with NVDA.


It does have identities. You can read about them here.

http://www.oeclassic.com/online-help-quickstart


Re: OE Classic is more accessible. Developers test with NVDA.

Brian's Mail list account <bglists@...>
 

I want to have my accounts in seperate little boxes isolated from each other not in a tree of accounts as Live mail and Thuunderbird do also Tbird uses completely different keyboard shortcuts.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Don H" <lmddh50@comcast.net>
To: <nvda@nvda.groups.io>
Sent: Wednesday, July 26, 2017 6:06 PM
Subject: Re: [nvda] OE Classic is more accessible. Developers test with NVDA.


I am missing something here. I have been using Thunderbird for many years and find it totally accessible and just as easy to use as Outlook Express. What issues are people having with Thunderbird and NVDA?

On 7/26/2017 12:02 PM, Brian Vogel wrote:
On Wed, Jul 26, 2017 at 09:31 am, Brian's Mail list account wrote:

better than Tbird

There really aren't many e-mail clients that fall into that category, free or paid. And heaven knows that Thunderbird is accessible. It's essentially the same people who have written Firefox that have and still are working on Thunderbird.

The Windows 10 email app is not "bog standard" in a variety of ways, starting with its use of the new universal apps interface. It lacks a large number of functions that "power users" (and that includes a lot of people who routinely post here) expect.

--
/Brian/- Windows 10 Home, 64-Bit, Version 1703, Build 15063 (dot level on request - it changes too often to keep in signature)

*//**/The opposite of a correct statement is a false statement./**/ But the opposite of a profound truth may well be another/**/ profound truth./*

*/~ /**/Niels Bohr/*


Re: OE Classic is more accessible. Developers test with NVDA.

Brian's Mail list account <bglists@...>
 

Yes I was using the term to mean basic really.
I did initially test it when I had continuous access to win ten, but was a bit fed up with continual new versions of windows. Hopefully they will stop at some point and just let people chuck along with security updates, then I'll get a machine install something usable and have a quiet life. AT the moment since I paid some money for the patch files for the old OE it has worked very well in windows 7. Did work on 10 but it was Microsoft who deliberately uninstalled it when a major update took place. Not a good move in my view.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Brian Vogel" <britechguy@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, July 26, 2017 6:02 PM
Subject: Re: [nvda] OE Classic is more accessible. Developers test with NVDA.


On Wed, Jul 26, 2017 at 09:31 am, Brian's Mail list account wrote:


better than Tbird
There really aren't many e-mail clients that fall into that category, free or paid. And heaven knows that Thunderbird is accessible. It's essentially the same people who have written Firefox that have and still are working on Thunderbird.

The Windows 10 email app is not "bog standard" in a variety of ways, starting with its use of the new universal apps interface. It lacks a large number of functions that "power users" (and that includes a lot of people who routinely post here) expect.

--
Brian - Windows 10 Home, 64-Bit, Version 1703, Build 15063 (dot level on request - it changes too often to keep in signature)

* * *The opposite of a correct statement is a false statement.* * But the opposite of a profound truth may well be another* * profound truth.*

* ~ * *Niels Bohr*


Re: how can i get microsoft spi5engine

 

Hmmm weird, I am not sure how you would get it back bar a reinstall of windows.

On 27/07/2017 5:07 p.m., Tony James wrote:
hi all, i don't no how this happened, but the spi5 tts seems to have disappeared from my win7 laptop. whenever i try to select the tts engine from the nvda synthesizer dialog, it says, cannot load the synth. any ideas? thx




how can i get microsoft spi5engine

Tony James <megatronjames@...>
 

hi all, i don't no how this happened, but the spi5 tts seems to have disappeared from my win7 laptop. whenever i try to select the tts engine from the nvda synthesizer dialog, it says, cannot load the synth. any ideas? thx


Re: test

Gene New Zealand <hurrikennyandopo@...>
 

Hi


One coming now.


there were not many this morning here in new zealand to read.


Gene nz



On 7/27/2017 11:24 AM, Don H wrote:
Haven't seen any messages from this list of late.




--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


test

Don H
 

Haven't seen any messages from this list of late.


Editing Video using NVDA

Albert Ruel
 

 

Hi all.  I want to be able to record and edit video with very limited sight using NVDA.  Can any of you recommend a PC video editing app I can use reliably? 

 

Thx, Albert


Re: question please, Re: [nvda] accessing jean's sight.

Travis Siegel <tsiegel@...>
 

The reason the numeric (ip) address doesn't usually work, is because most web hosting companies do what's calle dshared hosting.  In the shared hosting environment, several sites share the same machine.  In order for the web server to know what site you want, the information is sent as part of the header your web browser sends to the server (this was introduced in http protocol version 1.1).  When the server receives the http request, it checks this header property, to asertain which host you're actually asking for, then serves up the page that corresponds with that particular domain name.  If you use http version 1.0, or hit the ip address directly, then you'll get the default site for that server (which is often the first one in the configuration file, which might or might not be the one you actually want). 

Of course, ifyou run your own server, and you only have a single domain, then none of this is relevant, but that is pretty rare these days.

Hope this helps.



On 7/26/2017 3:25 AM, Gene wrote:
Not necessarily.  I know very little about this but using the numeric address often doesn't work for reasons I don't know enough about to explain even if its correct.
 
Gene
----- Original Message ----
Sent: Wednesday, July 26, 2017 2:06 AM
Subject: Re: question please, Re: [nvda] accessing jean's sight.

Yes that implies that when it was incorrect if we had tried the numeric
version it should have worked then??
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 25, 2017 4:59 PM
Subject: Re: question please, Re: [nvda] accessing jean's sight.


It may be that DNS servers are finding and correcting where the site address
resolves.  When a web site changes its address, as I recall, it takes a day
or two for DNS servers around the world to update themselves.  In this case,
for some reason, malicious, accidental, or whatever, the name of the site
was resolving to a different page.  This has evidently been corrected and
now the DNS servers are updating the numeric address they use when the web
site name is used.

Gene
----- Original Message -----


From: Brian's Mail list account via Groups.Io
Sent: Tuesday, July 25, 2017 10:38 AM
To: nvda@nvda.groups.io
Subject: Re: question please, Re: [nvda] accessing jean's sight.


Hi just in the last few minutes the site has gone back to normal again. I
guess its gradually clearing out the faulty pages in caches around the world
now.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 25, 2017 1:08 PM
Subject: Re: question please, Re: [nvda] accessing jean's sight.


I got the correct site just now.  I'm not sure what is going on and I don't
have the technical knowledge to know if this makes sense.  I wonder if there
is a DNS problem?  Could someone be changing where DNS servers, if that is
the right term, resolve to and doing nothing to the site or the actual
server itself?

Gene
----- Original Message -----

From: Gene New Zealand
Sent: Monday, July 24, 2017 10:50 PM
To: nvda@nvda.groups.io
Subject: Re: question please, Re: [nvda] accessing jean's sight.


Hi guys




it is gene from New Zealand who has the Accessibility Central.net website
that is been diverted at the moment. it is not my website so please do not
go to it just in case.




until it is sorted out or hosted elsewhere i have zipped the website up in a
program called 7 zip file manager which was used to do it.




you might need a program like that to access the contents of it.

you might have to make a folder first then put all the files into it.

then it is a matter of going to the index file and pressing the enter key on
it. to get to the information.


the zip file has been scanned with anti virus and malware programs and it
says it is clean.

If you want to download the zip file it is going to be put into a drop box
account which i will share on this list if you want it until this is sorted
out.

the drop box link is
https://www.dropbox.com/s/ujcz7ui1i7qxp58/Accessibility%20Central%20Website.zip?dl=0
the copy or back up is from the 19 th of July if it is all there and it
looks like it.
not the thing i would usually do but just in case the info is lost for any
reason i would hate it not been shared as it was doing for the community.

Gene nz


On 7/23/2017 1:54 PM, Laurie Mehta via Groups.Io wrote:

Hi,

Could someone please post how to remove a bookmark in firefox?
I want to remove my bookmark for now to avoid clicking on the tutorial page
until it is safe again.
Thanks.

It is totally rotten that anyone would hijack such a thoughtfully arranged
resource for us.

Gene, I'm sorry that this has happened.
-Laurie





--

Check out my website for NVDA tutorials and other blindness related material
at http://www.accessibilitycentral.net Regardless of where you are in New
Zealand if you are near one of the APNK sites you can use a copy of the NVDA
screen reader on one of their computers. To find out which locations (or
location) is near to you please visit
http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa
People's Network Kaharoa). To find an NVDA certified expert near you, please
visit the following link https://certification.nvaccess.org/. The
certification page contains the official list of NVDA certified individuals
from around the world, who have sat and successfully passed the NVDA expert
exam.










Re: Typing Feedback in Google Docs

Chris Mullins
 

NVDA+2 on qwerty keyboard toggles character echo on/off
NVDA+3 on qwerty keyboard toggles word echo on/off

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of kelby carlson
Sent: 26 July 2017 18:41
To: nvda@nvda.groups.io
Subject: [nvda] Typing Feedback in Google Docs

Is there any way to turn speaking of characters off in Google Docs so NVDA doesn't announce every single letter I type?


Typing Feedback in Google Docs

kelby carlson
 

Is there any way to turn speaking of characters off in Google Docs so
NVDA doesn't announce every single letter I type?


Re: OE Classic is more accessible. Developers test with NVDA.

 

It does have identities. You can read about them here.

http://www.oeclassic.com/online-help-quickstart


Re: NVDA not announcing save as dialog box

Bhavya shah
 

Hi,
Could someone collect the several log snippets shared in this thread
and report this issue on NVDA's Github tracker please? Please CC me
(@bhavyashah) so that I can follow any activity and aid in
troubleshooting this bug. I might not be able to get to this
ticket-filing till a day or so, thus requesting someone else who has
experienced this issue to report the same instead.
Thanks.

On 7/26/17, Brian's Mail list account via Groups.Io
<bglists=blueyonder.co.uk@groups.io> wrote:
Its very erratic though. I imagine that is why its so hard to track it
down.
My guess is that somewhere something is using a lot of processor for a
short time and Windows does not notice or cannot share the load as the tasks

need to be in the same core.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Dan Thompson" <dmt031073@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, July 26, 2017 11:29 AM
Subject: Re: [nvda] NVDA not announcing save as dialog box


Thanks for sharing this information and helping me not feel like I was going

crazy and causing he issue. Have a great day.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's

Mail list account via Groups.Io
Sent: Wednesday, July 26, 2017 2:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not announcing save as dialog box

No not really, I put up the log to show the seconds delay starting to build

up. In my view there is something strange about the way nvda looks at the
save and open dialogues sometimes, escpecially if there is an existing file

name in the field and then you start to type.
As has been said it slows things down.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Dan Thompson" <dmt031073@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 25, 2017 4:35 PM
Subject: Re: [nvda] NVDA not announcing save as dialog box


Hi Brian are you suggesting I get an add-in. I wasn't sure what all the
lines of programing was for. Thanks for your help.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account via Groups.Io
Sent: Tuesday, July 25, 2017 10:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not announcing save as dialog box

I just had it while typing in after it had come up, this was I think due to
problems with the list of suggestions generated when you start to type.

DEBUG - editableText.EditableText._hasCaretMoved (15:45:38.900):
Caret move detected using bookmarks. Elapsed: 0 ms IO - speech.speak
(15:45:38.911):
Speaking [LangChangeCommand ('en_GB'), u'blank'] IO -
inputCore.InputManager.executeGesture (15:45:44.282):
Input: kb(desktop):l
IO - speech._speakSpellingGen (15:45:49.157):
Speaking character u'l'
DEBUG - queueHandler.registerGeneratorObject (15:45:49.157):

Only a few seconds but enough to make it sound really odd.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Rui Fontes" <rui.fontes@tiflotecnia.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 25, 2017 12:08 PM
Subject: Re: [nvda] NVDA not announcing save as dialog box


It happens in a lot of programs.
In most cases, it will announce the window, but lots of time later...

Here is the log using last Next version of NVDA:
IO - inputCore.InputManager.executeGesture (12:02:55.132):
Input: kb(desktop):control+g
DEBUG - NVDAObjects.NVDAObject._get_placeholder (12:02:55.398):
Potential unimplemented child class:
<NVDAObjects.Dynamic_ClipboardCommandAnnouncementIAccessible object at
0x051B8410>
IO - braille.BrailleBuffer.update (12:02:55.400):
Braille regions text: [u'Sem t\xedtulo - Bloco de notas indispon\xedvel
',
u'Editor de Texto mln ed\xe7 ', u'as ']
IO - braille.BrailleHandler.update (12:02:55.401):
Braille window dots: 1 234 -
DEBUGWARNING - watchdog._watcher (12:02:55.910):
Trying to recover from freeze, core stack:
File "nvda.pyw", line 199, in <module>
File "core.pyc", line 396, in main
File "wx\_core.pyc", line 8657, in MainLoop
File "wx\_core.pyc", line 7952, in MainLoop
File "core.pyc", line 366, in Notify
File "IAccessibleHandler.pyc", line 889, in pumpAll
File "IAccessibleHandler.pyc", line 617, in processGenericWinEvent
File "IAccessibleHandler.pyc", line 529, in winEventToNVDAEvent
File "NVDAObjects\IAccessible\__init__.pyc", line 37, in
getNVDAObjectFromEvent
File "IAccessibleHandler.pyc", line 339, in accessibleObjectFromEvent
File "oleacc.pyc", line 240, in AccessibleObjectFromEvent

DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole
(12:02:56.009):
accRole failed: (-2147024809, 'O par\xe2metro est\xe1 incorreto.', (None,
None, None, 0, None))
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole
(12:02:56.013):
accRole failed: (-2147024809, 'O par\xe2metro est\xe1 incorreto.', (None,
None, None, 0, None))
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole
(12:02:56.016):
accRole failed: (-2147024809, 'O par\xe2metro est\xe1 incorreto.', (None,
None, None, 0, None))
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole
(12:02:56.131):
accRole failed: (-2147024809, 'O par\xe2metro est\xe1 incorreto.', (None,
None, None, 0, None))
DEBUGWARNING - watchdog._watcher (12:02:56.775):
Trying to recover from freeze, core stack:
File "nvda.pyw", line 199, in <module>
File "core.pyc", line 396, in main
File "wx\_core.pyc", line 8657, in MainLoop
File "wx\_core.pyc", line 7952, in MainLoop
File "core.pyc", line 366, in Notify
File "IAccessibleHandler.pyc", line 875, in pumpAll
File "IAccessibleHandler.pyc", line 654, in processFocusWinEvent
File "IAccessibleHandler.pyc", line 529, in winEventToNVDAEvent
File "NVDAObjects\IAccessible\__init__.pyc", line 43, in
getNVDAObjectFromEvent
File "NVDAObjects\__init__.pyc", line 71, in __call__
File "NVDAObjects\IAccessible\__init__.pyc", line 558, in __init__
File "IAccessibleHandler.pyc", line 909, in getIAccIdentity
File "comtypes\__init__.pyc", line 1078, in QueryInterface

DEBUGWARNING - core.CorePump.Notify (12:02:56.829):
errors in this core pump cycle
Traceback (most recent call last):
File "core.pyc", line 366, in Notify
File "IAccessibleHandler.pyc", line 875, in pumpAll
File "IAccessibleHandler.pyc", line 668, in processFocusWinEvent
File "IAccessibleHandler.pyc", line 684, in processFocusNVDAEvent
File "baseObject.pyc", line 34, in __get__
File "baseObject.pyc", line 110, in _getPropertyViaCache
File "NVDAObjects\IAccessible\__init__.pyc", line 637, in
_get_shouldAllowIAccessibleFocusEvent
File "baseObject.pyc", line 34, in __get__
File "baseObject.pyc", line 110, in _getPropertyViaCache
File "NVDAObjects\IAccessible\__init__.pyc", line 918, in _get_parent
File "NVDAObjects\__init__.pyc", line 78, in __call__
File "NVDAObjects\IAccessible\__init__.pyc", line 385, in
findOverlayClasses
File "baseObject.pyc", line 34, in __get__
File "baseObject.pyc", line 110, in _getPropertyViaCache
File "watchdog.pyc", line 202, in _COMError_init
CallCancelled
IO - speech.speak (12:02:58.977):
Speaking [u'Guardar como Janela Nome de ficheiro: Nome de
ficheiro:\nGuardar com o tipo: Guardar com o tipo:']



-----Mensagem Original-----
De: Quentin Christensen
Data: 25 de julho de 2017 04:32
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] NVDA not announcing save as dialog box


Hi Dan,

What program are you trying to save a file in (Word, NotePad, Reaper, ?)
and also which version of Windows?

Regards

Quentin.


On Tue, Jul 25, 2017 at 11:20 AM, Dan Thompson <dmt031073@gmail.com>
wrote:


Greetings,

Frequently when pressing control-S on a first time save of a file, the
save as box is not announced as being opened. I then tab once and shift
tab to make it be announced. Is there something I do not have checked on
somewhere?

Thanks for any help in advance.

subscribe to Friday Finds by sending a blank email with "subscribe dan's
tips" in the subject line. To

dmt031073@gmail.com

subscribe to "Hotspot With God" daily devotion by sending a blank message
with "subscribe devotion" in the subject line to

dmt031073@gmail.com

TRUTH FOR TODAY:

Romans 8:28, "And we know that God causes everything to work together for
the good of those who love God and are called according to his purpose
for them." (NLT)

Psalm 119:60, "I will hasten and not delay to obey your commands." (NIV)














--

Quentin Christensen
Training and Support Manager


Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
http://www.nvaccess.org/shop/


Ph +61 7 3149 3306
www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess






















--
Best Regards
Bhavya Shah

Blogger at Hiking Across Horizons: https://bhavyashah125.wordpress.com/

Contacting Me
E-mail Address: bhavya.shah125@gmail.com
Follow me on Twitter @BhavyaShah125 or www.twitter.com/BhavyaShah125
Mobile Number: +91 7506221750