|
NVDA doesn't save voice settings when closed
Gene
I'll provide a posssible solution to your
problem. I changed the subject line because it is the same subject line as
the previous thread.
NVDA is set, by default to save
any changed setting when it closes. For some reason, yours
isn't. This may be because you changed an NVDA setting or it may be
some other problem. After you change the settings, use the command NVDA
key control c to save the settings. You would do this after you activate
the ok button. Then, see what happens when you close and run NVDA
again.
Gene
----- Original Message
-----
Hi list Can somebody explain to me why when I exit n v d a and upload it again it doesn’t keep the voice settings plese? Thanks in advance Anthony
From: nvda@nvda.groups.io
[mailto:nvda@nvda.groups.io] On Behalf Of Peter Beasley
Personally, I think the sleep mode works better because if you move to another window wile Kurzweil 1000 is still running, nvda comes back without haveng to turn speach mode on. From: Dave Bahr Sent: Tuesday, August 15, 2017 8:10 PM Subject: Re: [nvda] silencing nvda while using kurzweil 1000
Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf
Of Gerardo Corripio
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: query
Gene
Please start a new thread when
starting a new topic. Don't just reply to a message, change the subject
line, and leave all the extraneous completely unrelated material below the
message. The reason I say to start a new message rather than just change
the subject line is because if you do that, for technical reasons I don't know,
in the archives the message is still placed in the old thread. I don't
know what happens if people read mail on their machines by conversation.
Gene
----- Original Message
-----
Hi list Can somebody explain to me why when I exit n v d a and upload it again it doesn’t keep the voice settings plese? Thanks in advance Anthony
From: nvda@nvda.groups.io
[mailto:nvda@nvda.groups.io] On Behalf Of Peter Beasley
Personally, I think the sleep mode works better because if you move to another window wile Kurzweil 1000 is still running, nvda comes back without haveng to turn speach mode on. From: Dave Bahr Sent: Tuesday, August 15, 2017 8:10 PM Subject: Re: [nvda] silencing nvda while using kurzweil 1000
Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf
Of Gerardo Corripio
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Gene
Also, if there is an error message from Windows
related to Kurzweil such as a crash message, it will be read. And, as I
said in an earlier message, you can't use the numpad with Kurzweil if you use
the speech toggle.
Gene
----- Original Message -----
From: Peter Beasley
Sent: Tuesday, August 15, 2017 2:22 PM
Subject: Re: [nvda] silencing nvda while using kurzweil
1000 Personally, I think the sleep mode works better
because if you move to another window wile
Kurzweil 1000 is still running, nvda comes back without haveng to turn speach
mode on.
From: Dave Bahr
Sent: Tuesday, August 15, 2017 8:10 PM
Subject: Re: [nvda] silencing nvda while using kurzweil
1000 Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io]
On Behalf Of Gerardo Corripio
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Gene
The speech mode toggle has NVDA running but without
speech. therefore, the numpad keys are still used by NVDA. If you
want to use NVDA with the numpad, you have to use the sleep feature.
Gene
----- Original Message -----
From: Dave Bahr
Sent: Tuesday, August 15, 2017 2:10 PM
Subject: Re: [nvda] silencing nvda while using kurzweil
1000 Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io
[mailto:nvda@nvda.groups.io] On Behalf Of Gerardo
Corripio
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: query
anthony borg
Hi list Can somebody explain to me why when I exit n v d a and upload it again it doesn’t keep the voice settings plese? Thanks in advance Anthony
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Peter Beasley
Sent: 15 August 2017 21:23 To: nvda@nvda.groups.io Subject: query
Personally, I think the sleep mode works better because if you move to another window wile Kurzweil 1000 is still running, nvda comes back without haveng to turn speach mode on. From: Dave Bahr Sent: Tuesday, August 15, 2017 8:10 PM Subject: Re: [nvda] silencing nvda while using kurzweil 1000
Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gerardo Corripio
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Peter Beasley
Personally, I think the sleep mode works better
because if you move to another window wile
Kurzweil 1000 is still running, nvda comes back without haveng to turn speach
mode on.
From: Dave Bahr
Sent: Tuesday, August 15, 2017 8:10 PM
Subject: Re: [nvda] silencing nvda while using kurzweil
1000 Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io]
On Behalf Of Gerardo Corripio
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Dave Bahr <dcbahr1@...>
Yes, that worked, the speech mode toggle. Thanks.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gerardo Corripio
Sent: Tuesday, August 15, 2017 12:44 PM To: nvda@nvda.groups.io Subject: Re: [nvda] silencing nvda while using kurzweil 1000
Some years ago, I asked this same question, and I was given some lines of text to write, but for the life of me, can't remember where or how, but since then, when using kurzweil1000 with NVDA, NVDA doesn't talk. I think i saved the file with a certain name, but for the life of me, can't remember how this was done.
El 15/08/2017 a las 01:23 p.m., Arlene escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Chris
Use nvda key+S and cycle through talk, beep and no speech modes
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Gerardo Corripio
Some years ago, I asked this same question, and I was given some
lines of text to write, but for the life of me, can't remember
where or how, but since then, when using kurzweil1000 with NVDA,
NVDA doesn't talk. I think i saved the file with a certain name,
but for the life of me, can't remember how this was done. El 15/08/2017 a las 01:23 p.m., Arlene
escribió:
-- Gera Enviado desde Thunderbird
|
||
|
|
||
|
Re: regarding mail
Andre Fisher
Press the down arrow once again. It’s because it’s a different table column.
Sent from Mail for Windows 10
From: Ravi Paswan
Sent: Tuesday, August 15, 2017 12:11 PM To: nvda@nvda.groups.io Subject: [nvda] regarding mail
hello teem member I am using the NVDA screen reader softwear but I am suffering a problem to check the Email from my Gmail account when I am open my mail box but NVDA has not announce the sender name with the checkbox I am press the letter X then I am press one time down errow key. to know the how is send me a mail so I am request to all please give me any solution how to solve the issue thank.
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Arlene
Hi there: I used it and when I hit k and then I entered on Kirtzwell NVDA silenced itself!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Peter Beasley
Sent: August-15-17 11:19 AM To: nvda@nvda.groups.io Subject: Re: [nvda] silencing nvda while using kurzweil 1000
Put nvda to sleep by holding down the insert and control keys and press the letter S.
From: Dave Bahr Sent: Tuesday, August 15, 2017 12:00 PM Subject: [nvda] silencing nvda while using kurzweil 1000
Hi, is there a way to silence nvda while using an independent speech program like Kurzweil 1000? That way I don’t have two eloquence synths going at once? Which is kind of psychedelic sounding but not very productive.
Thanks, Dave
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Arlene
Oh! I’ll have to give that a try!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Peter Beasley
Sent: August-15-17 11:19 AM To: nvda@nvda.groups.io Subject: Re: [nvda] silencing nvda while using kurzweil 1000
Put nvda to sleep by holding down the insert and control keys and press the letter S.
From: Dave Bahr Sent: Tuesday, August 15, 2017 12:00 PM Subject: [nvda] silencing nvda while using kurzweil 1000
Hi, is there a way to silence nvda while using an independent speech program like Kurzweil 1000? That way I don’t have two eloquence synths going at once? Which is kind of psychedelic sounding but not very productive.
Thanks, Dave
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Peter Beasley
Put nvda to sleep by holding down the insert and control keys and press the
letter S.
From: Dave Bahr
Sent: Tuesday, August 15, 2017 12:00 PM
Subject: [nvda] silencing nvda while using kurzweil
1000 Hi, is there a way to silence nvda while using an independent speech program like Kurzweil 1000? That way I don’t have two eloquence synths going at once? Which is kind of psychedelic sounding but not very productive.
Thanks, Dave
|
||
|
|
||
|
Re: Slightly OT - Rearranging/reorganising icons on windows 10 desktop, using NVDA, etc.
Arlene
Thanks. good to know when I get my new computer.
toggle quoted messageShow quoted text
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacques Stassen Sent: August-15-17 2:31 AM To: nvda@nvda.groups.io Subject: Re: [nvda] Slightly OT - Rearranging/reorganising icons on windows 10 desktop, using NVDA, etc. Hi Jacob, the following works for me: On desktop, de-select all icons with control+space. Press application key, go to "sort by" and choose "name." This puts my user folder at the top. If it doesn't work the first time, repeat the process, which should reverse the process. On 15/08/2017 10:25, Jacob Kruger wrote: I reloaded my windows 10 creators machine from scratch this past
|
||
|
|
||
|
Re: silencing nvda while using kurzweil 1000
Arlene
One way to do it is this. Go to the desk top. Shut down NVDA once you hit K for kurtzwell Once it’s gone. then hit enter and Kirtzwell will start. Usually If I use Jaws it will not talk when I use Kirtzwell
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Dave Bahr
Sent: August-15-17 4:01 AM To: nvda@nvda.groups.io Subject: [nvda] silencing nvda while using kurzweil 1000
Hi, is there a way to silence nvda while using an independent speech program like Kurzweil 1000? That way I don’t have two eloquence synths going at once? Which is kind of psychedelic sounding but not very productive.
Thanks, Dave
|
||
|
|
||
|
silencing nvda while using kurzweil 1000
Dave Bahr <dcbahr1@...>
Hi, is there a way to silence nvda while using an independent speech program like Kurzweil 1000? That way I don’t have two eloquence synths going at once? Which is kind of psychedelic sounding but not very productive.
Thanks, Dave
|
||
|
|
||
|
Re: accessible internet speedtests
Arlene
This is a keeper. Thanks! saved it to my drafts! Thanks for others who provided sites.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Sent: August-15-17 10:29 AM To: nvda@nvda.groups.io Subject: Re: [nvda] accessible internet speedtests
Arlene, You may be correct. However, if you have the time and/or the interest I'd be curious to know if the speed test works for Canadian users. If you decide to try it, would you let me know? David
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Arlene <nedster66@...>
Thanks. I wanted a website that would do both Canada and the United states. I don’t think concast would allow Canadians to use the site. Thanks for the suggestion.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Hello. Another very accessible Internet speed test is from Comcast
When using this with NVDA, you'll receive the most accessible experience when using Firefox. You don't need to be a Comcast subscriber in order to use it. No account creation is required. Just open the link and look for the button to begin the test. I think that the accessibility will delight you.
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Hello Arlene.
There are a few I know of that are pretty simple and easy to use. One is and the other one is
I hope this helps you.
Scott
Sent from Mail for Windows 10
From: Arlene
Hi list: Is there any accessible web sites that have internet speed tests both in Canada and the US? The one for shaw is not very accessible thanks. and have a good day.
|
||
|
|
||
|
Re: accessible internet speedtests
Arlene
Pretty good for an old windows 7. On our new cable provider called Shaw the site is not very accessible. I’m on a two gigahertz it wont go to the 5. I’m going to need a new computer. Thanks for this wonderful site!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Sent: August-15-17 10:29 AM To: nvda@nvda.groups.io Subject: Re: [nvda] accessible internet speedtests
Arlene, You may be correct. However, if you have the time and/or the interest I'd be curious to know if the speed test works for Canadian users. If you decide to try it, would you let me know? David
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Arlene <nedster66@...>
Thanks. I wanted a website that would do both Canada and the United states. I don’t think concast would allow Canadians to use the site. Thanks for the suggestion.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Hello. Another very accessible Internet speed test is from Comcast
When using this with NVDA, you'll receive the most accessible experience when using Firefox. You don't need to be a Comcast subscriber in order to use it. No account creation is required. Just open the link and look for the button to begin the test. I think that the accessibility will delight you.
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Hello Arlene.
There are a few I know of that are pretty simple and easy to use. One is and the other one is
I hope this helps you.
Scott
Sent from Mail for Windows 10
From: Arlene
Hi list: Is there any accessible web sites that have internet speed tests both in Canada and the US? The one for shaw is not very accessible thanks. and have a good day.
|
||
|
|
||
|
Re: accessible internet speedtests
Arlene
David! It worked! Here are the results! It was accessible!
0 100 Test your Internet Speed Start Test Mbps 0% complete · Latency:96 -- ms · Secaucus, NJ Download Speed 24.22 -- Mbps Upload Speed 13.12 -- Mbps Let's test your Internet speedThe Xfinity Speed Test will show you the download and upload speeds from our speed test servers to your device. Learn about the things that may affect your test results Speed ResultsDownload Speed 24.22 -- Mbps Upload Speed 13.12 -- Mbps Latency 96 ms -- ms Protocol IPv4 Host Secaucus, NJ Technical limits on Ethernet ports may affect your speed test results. Learn about the things that may affect your test results.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Sent: August-15-17 10:29 AM To: nvda@nvda.groups.io Subject: Re: [nvda] accessible internet speedtests
Arlene, You may be correct. However, if you have the time and/or the interest I'd be curious to know if the speed test works for Canadian users. If you decide to try it, would you let me know? David
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Arlene <nedster66@...>
Thanks. I wanted a website that would do both Canada and the United states. I don’t think concast would allow Canadians to use the site. Thanks for the suggestion.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Hello. Another very accessible Internet speed test is from Comcast
When using this with NVDA, you'll receive the most accessible experience when using Firefox. You don't need to be a Comcast subscriber in order to use it. No account creation is required. Just open the link and look for the button to begin the test. I think that the accessibility will delight you.
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Hello Arlene.
There are a few I know of that are pretty simple and easy to use. One is and the other one is
I hope this helps you.
Scott
Sent from Mail for Windows 10
From: Arlene
Hi list: Is there any accessible web sites that have internet speed tests both in Canada and the US? The one for shaw is not very accessible thanks. and have a good day.
|
||
|
|
||
|
Re: accessible internet speedtests
Arlene
I’ll go try it right now! I don’t know if it will work!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Sent: August-15-17 10:29 AM To: nvda@nvda.groups.io Subject: Re: [nvda] accessible internet speedtests
Arlene, You may be correct. However, if you have the time and/or the interest I'd be curious to know if the speed test works for Canadian users. If you decide to try it, would you let me know? David
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Arlene <nedster66@...>
Thanks. I wanted a website that would do both Canada and the United states. I don’t think concast would allow Canadians to use the site. Thanks for the suggestion.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Goldfield
Hello. Another very accessible Internet speed test is from Comcast
When using this with NVDA, you'll receive the most accessible experience when using Firefox. You don't need to be a Comcast subscriber in order to use it. No account creation is required. Just open the link and look for the button to begin the test. I think that the accessibility will delight you.
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Hello Arlene.
There are a few I know of that are pretty simple and easy to use. One is and the other one is
I hope this helps you.
Scott
Sent from Mail for Windows 10
From: Arlene
Hi list: Is there any accessible web sites that have internet speed tests both in Canada and the US? The one for shaw is not very accessible thanks. and have a good day.
|
||
|
|