Date   

Re: do you know one accessible, simple to use and free audio recorder?

Roger Stewart
 

I just Googled it and got it from there with no problems at all.

Roger








On 11/12/2017 6:37 PM, Gene wrote:
Here is a page with information about MP3 Direct Cut and a download link.
On this page, is a downloads linkk.  If you follow it, you will be on a page with information about the program and below it, links to many places from which you can download it. 
 
I would think these links would be safe since the link I gave is to the site of the developer.  I don't know that, but that is what I think is probably or likely the case.
 
So many free programs bundle unwanted programs that I don't know if MP3 Direct Cut has started to do this.  I certainly hope not and I haven't seen any complaints about it.  But as usual, be careful when downloading free software.
 
Gene
----- Original Message -----
Sent: Saturday, November 11, 2017 11:42 PM
Subject: Re: [nvda] do you know one accessible, simple to use and free audio recorder?

Care to send the direct of the mp3 DirectCut. Thanks.

Robert Mendoza
On 11/12/2017 1:05 PM, Mr. Wong Chi Wai, William wrote:
for me, I would use audicity


Gene 於 12/11/2017 4:40 寫道:
Mp3 Direct Cut meets all your requirements. 
 
Gene
----- Original Message -----

Sent: Saturday, November 11, 2017 1:37 PM
Subject: Re: [nvda] do you know one accessible, simple to use and free audio recorder?

Depends what you call simple. Many do record but as often when you do this
you next need to edit the files, then I'd still use a program like audacity
or if you can afford a little beit Goldwave.
 There is virtual recorder but not tested it on XP as I think its aimed at
those with sound cards that you cannot record streams from etc.

If you have a mobile phone, just press record is your thing.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "zahra" <nasrinkhaksar3@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, November 11, 2017 6:46 PM
Subject: [nvda] do you know one accessible, simple to use and free audio
recorder?


> hello every one.
> i need one program which can record mp3, be freeware or opensource,
> safe, reliable, simple to use, supports all windows versions since xp,
> accessible and if possible, without extra software offering.
> except jetaudio that i realy cant use, please help me.
> God bless you all!
>
> --
> we have not sent you but as a mercy to the entire creation.
> holy quran, chapter 21, verse 107.
> in the very authentic narration from prophet Mohammad is:
> indeed, imam husayn is the beacon of guidance and the ark of salvation.
> best website for studying islamic book in different languages
> www.al-islam.org
>
>
>







Re: do you know one accessible, simple to use and free audio recorder?

Gene
 

Here is a page with information about MP3 Direct Cut and a download link.
On this page, is a downloads linkk.  If you follow it, you will be on a page with information about the program and below it, links to many places from which you can download it. 
 
I would think these links would be safe since the link I gave is to the site of the developer.  I don't know that, but that is what I think is probably or likely the case.
 
So many free programs bundle unwanted programs that I don't know if MP3 Direct Cut has started to do this.  I certainly hope not and I haven't seen any complaints about it.  But as usual, be careful when downloading free software.
 
Gene

----- Original Message -----
Sent: Saturday, November 11, 2017 11:42 PM
Subject: Re: [nvda] do you know one accessible, simple to use and free audio recorder?

Care to send the direct of the mp3 DirectCut. Thanks.

Robert Mendoza
On 11/12/2017 1:05 PM, Mr. Wong Chi Wai, William wrote:
for me, I would use audicity


Gene 於 12/11/2017 4:40 寫道:
Mp3 Direct Cut meets all your requirements. 
 
Gene
----- Original Message -----

Sent: Saturday, November 11, 2017 1:37 PM
Subject: Re: [nvda] do you know one accessible, simple to use and free audio recorder?

Depends what you call simple. Many do record but as often when you do this
you next need to edit the files, then I'd still use a program like audacity
or if you can afford a little beit Goldwave.
 There is virtual recorder but not tested it on XP as I think its aimed at
those with sound cards that you cannot record streams from etc.

If you have a mobile phone, just press record is your thing.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "zahra" <nasrinkhaksar3@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, November 11, 2017 6:46 PM
Subject: [nvda] do you know one accessible, simple to use and free audio
recorder?


> hello every one.
> i need one program which can record mp3, be freeware or opensource,
> safe, reliable, simple to use, supports all windows versions since xp,
> accessible and if possible, without extra software offering.
> except jetaudio that i realy cant use, please help me.
> God bless you all!
>
> --
> we have not sent you but as a mercy to the entire creation.
> holy quran, chapter 21, verse 107.
> in the very authentic narration from prophet Mohammad is:
> indeed, imam husayn is the beacon of guidance and the ark of salvation.
> best website for studying islamic book in different languages
> www.al-islam.org
>
>
>






Re: NVDA speaking even when it’s not loaded when there’s a problem with shut down

Lino Morales <linomorales001@...>
 

Good point Gene. I don't find it annoying and this is coming from a guy who went from XP to WIN 10 back in September 2015.


On 11/11/2017 6:01 PM, Gene wrote:
Most of the time, UAC doesn't cause problems.  All you have to do if you hear a UAC message is issue the command alt y because you are in a dialog and you are saying yes to the question being asked.  Why, in today's security environment, would you turn off UAC when responding is so simple?
 
Gene
----- Original Message -----
From: The Wolf
Sent: Saturday, November 11, 2017 3:41 PM
Subject: Re: [nvda] NVDA speaking even when it’s not loaded when there’s a problem with shut down

start iac

rather start minue

type in uiac and set slider to 0


On 11/11/2017 2:35 PM, Mary Otten wrote:
> Speaking of uac, it used to be possible to disable that. I don’t know if that’s still true with windows 10. It saves a lot of hassle. I suppose there are security implications of coarse.
> Mary
>
>
> Sent from my iPhone
>
>> On Nov 11, 2017, at 1:21 PM, Shaun Everiss <sm.everiss@...> wrote:
>>
>> Well the uac can be.
>>
>> To be honest when I get a system like this I just do a reformat and load things myself and test, test, test.
>>
>> Usually when I load my configs it doesn't do that.
>>
>> If it does its bios, drivers or both.
>>
>> The issue is when I have to deal with user software which gets in the way.
>>
>> I can do it that way but it takes longer, and costs the client and myself more time.
>>
>> I'd prefur to just reformat and reinstall windows and then I have an easier time.
>>
>> Ofcause after that loading each bit of software at a time will eventually yeald the error.
>>
>> 9 times out of 10 at that stage its new or updated software.
>>
>> And if it gets to that state I use google.
>>
>> Sometimes a user needs a function and then just cracks software that needs it or installs malware full software to get it working.
>>
>> At that point I just ask them for the function and then I can google that.
>>
>> There is enough free opensource or low cost software that I either find the entire package or the modules I need and if I am lucky a wrapper front end to put them together.
>>
>> The issue is then to convince the user to use said software.
>>
>> I would to be honest ask the tech what stuff is on there.
>>
>> ANd just get it reformatted and ask to get its hardware tested the unit cleaned, sure its going to cost a bit but you have already got it in the shop and are generating costs so get it done.
>>
>> I have just had a system revived that stopped working the entire os crashed, the system died.
>>
>> Regreasing the syncs, clearing the dust and replacing the power supply and all small fans and its up.
>>
>>
>>
>>
>>> On 12/11/2017 8:55 a.m., Mary Otten wrote:
>>> I have this new machine and it has NVDA on it. But in Vda  does not load at start up. We are having some problems with the machine, and my husband thought he had narrowed it down to stuff screwing up when you restart rather than shutting down the machine. Anyway, with NVDA not loaded when the machine is shutting down, occasionally will hang up and e speak will start talking. That is not the synthesizer I have selected. But it does talk. And it is happened on a few occasions. When he took it back to the store to let the tech look at it, it did that once, and now the tech is blaming the whole thing on NVDA. I’m sure that’s not correct, but I don’t know what to tell them.
>>> Mary
>>>
>>>
>>> Sent from my iPhone
>>>
>>> .
>>>
>>
>>
>>
>
>
>





Re: NVDA speaking even when it’s not loaded when there’s a problem with shut down

Lino Morales <linomorales001@...>
 

Mary. You can set it to 0, but the UAC can save your butt someday. I leave it at it's default.

On 11/11/2017 4:35 PM, Mary Otten wrote:
Speaking of uac, it used to be possible to disable that. I don’t know if that’s still true with windows 10. It saves a lot of hassle. I suppose there are security implications of coarse.
Mary


Sent from my iPhone

On Nov 11, 2017, at 1:21 PM, Shaun Everiss <sm.everiss@...> wrote:

Well the uac can be.

To be honest when I get a system like this I just do a reformat and load things myself and test, test, test.

Usually when I load my configs it doesn't do that.

If it does its bios, drivers or both.

The issue is when I have to deal with user software which gets in the way.

I can do it that way but it takes longer, and costs the client and myself more time.

I'd prefur to just reformat and reinstall windows and then I have an easier time.

Ofcause after that loading each bit of software at a time will eventually yeald the error.

9 times out of 10 at that stage its new or updated software.

And if it gets to that state I use google.

Sometimes a user needs a function and then just cracks software that needs it or installs malware full software to get it working.

At that point I just ask them for the function and then I can google that.

There is enough free opensource or low cost software that I either find the entire package or the modules I need and if I am lucky a wrapper front end to put them together.

The issue is then to convince the user to use said software.

I would to be honest ask the tech what stuff is on there.

ANd just get it reformatted and ask to get its hardware tested the unit cleaned, sure its going to cost a bit but you have already got it in the shop and are generating costs so get it done.

I have just had a system revived that stopped working the entire os crashed, the system died.

Regreasing the syncs, clearing the dust and replacing the power supply and all small fans and its up.




On 12/11/2017 8:55 a.m., Mary Otten wrote:
I have this new machine and it has NVDA on it. But in Vda does not load at start up. We are having some problems with the machine, and my husband thought he had narrowed it down to stuff screwing up when you restart rather than shutting down the machine. Anyway, with NVDA not loaded when the machine is shutting down, occasionally will hang up and e speak will start talking. That is not the synthesizer I have selected. But it does talk. And it is happened on a few occasions. When he took it back to the store to let the tech look at it, it did that once, and now the tech is blaming the whole thing on NVDA. I’m sure that’s not correct, but I don’t know what to tell them.
Mary


Sent from my iPhone

.


Re: NVDA speaking even when it’s not loaded when there’s a problem with shut down

Lino Morales <linomorales001@...>
 

The main dev is still alive and well. Michael Kurreen is sure working with Raif and Co. James Teh has moved on to the Mozilla Foundation.

On 11/11/2017 2:59 PM, The Wolf wrote:
I hope nvda doesn't began to die now that the main developer has left
does any one know if they found a replacement developer?

On 11/11/2017 12:55 PM, Mary Otten wrote:
I have this new machine and it has NVDA on it. But in Vda  does not load at start up. We are having some problems with the machine, and my husband thought he had narrowed it down to stuff screwing up when you restart rather than shutting down the machine. Anyway, with NVDA not loaded when the machine is shutting down, occasionally will hang up and e speak will start talking. That is not the synthesizer I have selected. But it does talk. And it is happened on a few occasions. When he took it back to the store to let the tech look at it, it did that once, and now the tech is blaming the whole thing on NVDA. I’m sure that’s not correct, but I don’t know what to tell them.
Mary


Sent from my iPhone




Re: NVDA in the workforce and in public institutions

Kevin Cussick
 

nope not seeing this on any of my computers.

On 11/11/2017 05:15, Tyler Wood wrote:
Hi,
I wouldn’t either, however…
The difference in jaws and NVDA moving through explorer windows is so drastically light and day different on the same computer. Despite what the processor is doing jaws simply handles it whereas NVDA, by contrast, is frustratingly slow. It’s especially telling when you use them side by side.
*From: *Brian Vogel <mailto:britechguy@...>
*Sent: *November 10, 2017 10:19 PM
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *Re: [nvda] NVDA in the workforce and in public institutions
On Fri, Nov 10, 2017 at 05:57 pm, Tyler Wood wrote:
I’m talking intel atom, ulv celleron, Pentium.
I would not expect screen readers to be particularly "sprightly" on any of these processors if what they're running on top of is in any way processing intensive.
--
Brian- Windows 10 Home, 64-Bit, Version 1709, Build 16299  (dot level on request - it changes too often to keep in signature)
/*     The opposite of a correct statement is a false statement.  But the opposite of a profound truth may well be another profound truth.*/
/**//*~ Niels Bohr*/


Re: NVDA in the workforce and in public institutions

Kevin Cussick
 

Hi, from a good fast I7 ssd down to a little tablet or 2 with atom processor no problems.

On 11/11/2017 01:56, Tyler Wood wrote:
Hi,
Yes, but again, what processors are in these?
I’m talking intel atom, ulv celleron, Pentium.
Again, I’d be more than happy to give a recording of exactly what I’m experiencing side by side with alternatives so people can see what I’m getting at.
*From: *Kevin Cussick via Groups.Io <mailto:the.big.white.shepherd@...>
*Sent: *November 10, 2017 4:23 PM
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *Re: [nvda] NVDA in the workforce and in public institutions
using nvda on 10 machines and using windows 10 not having this problem
on any of them.   but can't say about the outlook problems.
On 10/11/2017 16:42, Tyler Wood wrote:

> Is currently super, super sluggish in windows explorer in windows 10.

>

> I’m truly baffled as to why I’m the only one seeing this or taking

> notice. Switching to JFW there is such a difference it’s hard to

> explain, especially on lower end computers with atom processors and even

> lower end core I series.

>

> I’d have thought by this time a bug report would have been issued. I’m

> not about to do it if nobody else is noticing NVDA’s sluggishness – even

> though me and a few other people I know are – maybe it’s just us being

> impatient?

>

> *From: *Steve Nutt <mailto:steve@...>

> *Sent: *November 10, 2017 9:46 AM

> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject: *Re: [nvda] NVDA in the workforce and in public institutions

>

> Hi Tyler,

>

> You hit another nail there, usability.  Currently, NVDA crashes all over

> the place in outlook 2016, I can’t even use it.

>

> If I had to rely on it for my daily bread, the fix is a long time

> coming.  Whereas, in JAWS 2018, they have fixed it already.

>

> So to some extent, you do get what you pay for.  The fixing of MS

> Outlook is obviously not a high enough priority with NVDA to push out a

> quick update.

>

> All the best

>

> Steve

>

> *From:*nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] *On Behalf Of

> *Tyler Wood

> *Sent:* 09 November 2017 08:42

> *To:* nvda@nvda.groups.io

> *Subject:* Re: [nvda] NVDA in the workforce and in public institutions

>

> Hi,

>

> My workplace provided me with jaws.

>

> *Open source is nice, things get fixed, yes, but companies, especially

> government companies, want things that simply work and are well known

> and reliable. Also probably have an ongoing license with jaws, so why

> not use it?*

>

> *Me personally, if I had a job requiring jaws, $125 every 2 years is

> hardly a drop in the bucket especially considering if the company pays

> for the license itself. Also for me, NVDA wasn’t usable in most of the

> cataloguing programs I worked in whereas jaws was. This was a few years

> back now, though, so things might change.*

>

> **

>

> **

>

> *From: *Shaun Everiss <mailto:sm.everiss@...>

> *Sent: *November 9, 2017 2:28 AM

> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject: *Re: [nvda] NVDA in the workforce and in public institutions

>

> Sadly this is the curse as much as it is a blessing with opensource.

>

> Look at blind extra, there is probably nothing to stop people modifying

>

> nvda with a virus and releasing it as something else and tricking users.

>

> I know we have a good security review of addons, but  what are ways we

>

> can protect nvda if any from this.

>

> Governments and such probably have a contract with vfo and need jaws

>

> jaws or nothing.

>

> I couldn't load anything bar jaws at university.

>

> They simply wouldn't accept anything bar jaws.

>

> On the other hand, if your work wants you to use jaws they should foot

>

> the bill for it, and all upgrades, and smas, and if you suddenly have an

>

> system upgrade and need to buy the same functionality again, then let

>

> them pay the 600000 or so bucks for the privilage.

>

> Not the users issue.

>

> If they want to use a company with bad support, you just say I am not

>

> paying for it, you pay or I just won't bother.

>

> Users can not afford a lot of the access tech because governments and

>

> organisations are paying for licences.

>

> Dolphin stuff is affordable to some extent the rest naaah.

>

> On 9/11/2017 7:52 p.m., Mike and Jenna wrote:

>

>  > Hi,

>

>  >

>

>  > I have to chime in here. My wife works for the government and they

> will not allow NVDA either. They said they do not allow anything on

> their systems ware you can get the code for it online because it forms a

> security risk for their systems. I love NVDA but can see due to the

> response form her IT department a hard line against letting NVDA into

> many government uses.

>

>  >

>

>  > -----Original Message-----

>

>  > From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

> Joseph Lee

>

>  > Sent: Thursday, November 9, 2017 1:15 AM

>

>  > To: nvda@nvda.groups.io

>

>  > Subject: Re: [nvda] NVDA in the workforce and in public institutions

>

>  >

>

>  > Hi Sky,

>

>  > I'm sure Quentin will weigh on this more, but when you meet this

> person next month, can you ask him the following questions:

>

>  > * Please define "security".

>

>  > * So it was claimed that closed source products are more secure.

> There are tons of examples where open-source software might offer equal

> or better security, not because of openness of code, but due to

> potential to fix issues early on through contributions. What's your

> opinion on that?

>

>  > * Until a few years ago, using NVDA in professional setting was only

> a dream, but we're getting to a point where more organizations are

> choosing to use NVDA, and there are international examples out there. Do

> you have any comments on that?

>

>  > * So Window-Eyes was chosen due to "perceived improved security due

> to close-source nature of the program". What is more secure in 2017:

> unsupported program that people cannot offer quality security fixes on a

> timely manner, or an open-source product that does have community

> backing, including looking out for security problems?

>

>  > In case this person asks who and why these questions are asked,

> please tell him that a reputable NVDA developer asks these questions,

> and this developer is asking tough questions to get this person to think

> critically. If he asks, "why should I care or think critically", please

> tell him that thinking critically allows one to make better choices in

> the end, including policy decisions (yes, that's my debator side coming

> out). In the end, it would be much better (strategically) if you frame

> these questions as though you are asking them, because it also allows

> you to think carefully about what you are dealing with.

>

>  > Cheers,

>

>  > Joseph

>

>  >

>

>  > -----Original Message-----

>

>  > From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

> Sky Mundell

>

>  > Sent: Wednesday, November 8, 2017 10:04 PM

>

>  > To: nvda@nvda.groups.io

>

>  > Subject: Re: [nvda] NVDA in the workforce and in public institutions

>

>  >

>

>  > Hello. Let me check with him next month, and I'll get back to you on

> this subject.

>

>  >

>

>  > -----Original Message-----

>

>  > From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

> Bhavya shah

>

>  > Sent: Wednesday, November 08, 2017 10:02 PM

>

>  > To: nvda@nvda.groups.io

>

>  > Subject: Re: [nvda] NVDA in the workforce and in public institutions

>

>  >

>

>  > Hi Sky,

>

>  > Before we debate the security of NVDA, I think we need to get the

> case of the library representative clarified. Firstly, what are the

> bases of this assertion that NVDA is less secure? Secondly, assuming

> that the claimant has the requisite technical knowhow, has he perused

> NVDA's source code to substantiate this claim? Thirdly, are there any

> specific security vulnerabilities or exploits present in NVDA that he

> can point us to?

>

>  > Unless the library representative can provide cogent responses to the

> above questions, or strengthen his claim by concrete evidence, I would

> dismiss such a comment as a misinformed and groundless one which holds

> no water.

>

>  > Thanks.

>

>  >

>

>  > On 11/9/17, Sky Mundell <skyt@...> wrote:

>

>  >> Hello All. Today, I was at our monthly technology meeting at a public

>

>  >> library here in Victoria, British Columbia, and NVDA was one of the

>

>  >> screen reading options discussed to a new participant who had low

>

>  >> vision. However, the tech at the library looked at it, and he
told the

>

>  >> group that it was less secure, and they commented that it was better

>

>  >> for home use, rather than in corporate environments. Would NV Access

>

>  >> staffers like to comment on this issue, and what can be done to

>

>  >> address this issue? Because they were going to settle on the

>

>  >> Window-Eyes for office option back when it was being updated, but as

>

>  >> we all know it got discontinued and they did look at Window-Eyes
as an

>

>  >> option and they were more in favour of it due to it not being Open

>

>  >> Source. They also did have JAWS for a time but got rid of it due to

>

>  >> lack of training and they would have had to spend money to get

>

>  >> somebody from FS to train them on it.  Any suggestions you guys

> could give me would be greatly appreciated! Thanks, Sky.

>

>  >>

>

>  >>

>

>  >>

>

>  >>

>

>  >>

>

>  >

>

>  > --

>

>  > Best Regards

>

>  > Bhavya Shah

>

>  >

>

>  > Blogger at Hiking Across Horizons:
https://bhavyashah125.wordpress.com/

>

>  >

>

>  > Contacting Me

>

>  > E-mail Address: bhavya.shah125@... Follow me on Twitter

> @BhavyaShah125 or www.twitter.com/BhavyaShah125 Mobile Number: +91

> 7506221750

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>  >

>

>


Re: do you know one accessible, simple to use and free audiorecorder?

Chris Mullins
 

Could you tell me where you downloaded MP3 direct cut from.  I have downloaded a file called MP3DC.exe which I run to get a set-up dialog which I can read with say all but can’t access for some reason.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Griffith
Sent: 12 November 2017 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] do you know one accessible, simple to use and free audiorecorder?

 

Yes I have the same question pressing R and then space starts the recording but pressing space and r again does not seem to stop it. Certainly not in a way that Mp3DirectCut will recognise as anything to save with control W.

 

Unfortunatley the manual seems unclear on this  as well telling you how to start but not, in the bit I looked in on how to stop or pause.

David Griffith

 

 

My Blind Access and Guide dog Blog
http://dgriffithblog.wordpress.com/
My Blind hammer Blog
https://www.westhamtillidie.com/authors/blind-hammer/posts

 

From: zahra
Sent: 12 November 2017 16:00
To: nvda@nvda.groups.io
Subject: Re: [nvda] do you know one accessible, simple to use and free audiorecorder?

 

hi again.

how should i stop recording, pause recording or save the recorded

files after finishing?

thanks brian, gene and roger for your help and God bless all.

 

On 11/12/17, Roger Stewart <paganus2@...> wrote:

> You should get the lame-enc.dll file and just put it into the mp3 direct

> cut folder and that will do it.

> Roger

> On 11/12/2017 4:48 AM, Brian's Mail list account via Groups.Io wrote:

>> Looks to me like you would need to download the latest lame mp3 full

>> library to record in mp3. Not sure but just a quick read of the manual

>> suggests there is a record button and as I do not see one despite

>> setting the hardware to my sound card and only lame playback I can

>> deduce this is probably the case. If others disagree, do let us know.

>> Brian

>> 

>> bglists@...

>> Sent via blueyonder.

>> Please address personal email to:-

>> briang1@..., putting 'Brian Gaff'

>> in the display name field.

>> ----- Original Message ----- From: "Brian's Mail list account via

>> Groups.Io" <bglists@...>

>> To: <nvda@nvda.groups.io>

>> Sent: Sunday, November 12, 2017 10:02 AM

>> Subject: Re: [nvda] do you know one accessible, simple to use and free

>> audio recorder?

>> 

>> 

>>> What system are you running it on? I'd have thought, like many of

>>> these programs they have to know what to record from in the first

>>> place so there should be some kind of set up system for it. I've not

>>> used it myself, but xp sound and 7 sound and later work in different

>>> ways, which is why quickmix won't work after XP.

>>> Brian

>>> 

>>> bglists@...

>>> Sent via blueyonder.

>>> Please address personal email to:-

>>> briang1@..., putting 'Brian Gaff'

>>> in the display name field.

>>> ----- Original Message ----- From: "zahra" <nasrinkhaksar3@...>

>>> To: <nvda@nvda.groups.io>

>>> Sent: Sunday, November 12, 2017 7:01 AM

>>> Subject: Re: [nvda] do you know one accessible, simple to use and

>>> free audio recorder?

>>> 

>>> 

>>> hi again every one specially gene and roger.

>>> thanks extremely for your help, mp3 direct cut is exactly the software

>>> that i need.

>>> but the only problem for me is i cant record anything.

>>> i only can delete the unnecessary part of my sounds.

>>> what should i do to record mp3 with it?

>>> 

>>> 

>>> On 11/12/17, Gene <gsasner@...> wrote:

>>>> But all the person wants to do is work with MP3 files.  Audacity is

>>>> a more

>>>> complex program and just for recording and editing MP3 files, MP3

>>>> direct Cut

>>>> is a bettter choice.

>>>> 

>>>> Gene

>>>> ----- Original Message -----

>>>> 

>>>> From: Mr. Wong Chi Wai, William

>>>> Sent: Saturday, November 11, 2017 11:05 PM

>>>> To: nvda@nvda.groups.io

>>>> Subject: Re: [nvda] do you know one accessible, simple to use and

>>>> free audio

>>>> recorder?

>>>> 

>>>> 

>>>> for me, I would use audicity

>>>> 

>>>> 

>>>> 

>>>> Gene 12/11/2017 4:40 寫道:

>>>> 

>>>>   Mp3 Direct Cut meets all your requirements.

>>>> 

>>>>   Gene

>>>>   ----- Original Message -----

>>>> 

>>>> 

>>>>   From: Brian's Mail list account via Groups.Io

>>>>   Sent: Saturday, November 11, 2017 1:37 PM

>>>>   To: nvda@nvda.groups.io

>>>>   Subject: Re: [nvda] do you know one accessible, simple to use and

>>>> free

>>>> audio recorder?

>>>> 

>>>> 

>>>>   Depends what you call simple. Many do record but as often when you

>>>> do this

>>>> 

>>>>   you next need to edit the files, then I'd still use a program like

>>>> audacity

>>>>   or if you can afford a little beit Goldwave.

>>>>    There is virtual recorder but not tested it on XP as I think its

>>>> aimed at

>>>> 

>>>>   those with sound cards that you cannot record streams from etc.

>>>> 

>>>>   If you have a mobile phone, just press record is your thing.

>>>>    Brian

>>>> 

>>>>   bglists@...

>>>>   Sent via blueyonder.

>>>>   Please address personal email to:-

>>>>   briang1@..., putting 'Brian Gaff'

>>>>   in the display name field.

>>>>   ----- Original Message -----

>>>>   From: "zahra" <nasrinkhaksar3@...>

>>>>   To: <nvda@nvda.groups.io>

>>>>   Sent: Saturday, November 11, 2017 6:46 PM

>>>>   Subject: [nvda] do you know one accessible, simple to use and free

>>>> audio

>>>>   recorder?

>>>> 

>>>> 

>>>>   > hello every one.

>>>>   > i need one program which can record mp3, be freeware or opensource,

>>>>   > safe, reliable, simple to use, supports all windows versions

>>>> since xp,

>>>>   > accessible and if possible, without extra software offering.

>>>>   > except jetaudio that i realy cant use, please help me.

>>>>   > God bless you all!

>>>>   >

>>>>   > --

>>>>   > we have not sent you but as a mercy to the entire creation.

>>>>   > holy quran, chapter 21, verse 107.

>>>>   > in the very authentic narration from prophet Mohammad is:

>>>>   > indeed, imam husayn is the beacon of guidance and the ark of

>>>> salvation.

>>>>   > best website for studying islamic book in different languages

>>>>   > www.al-islam.org

>>>>   >

>>>>   >

>>>>   >

>>>> 

>>>> 

>>>> 

>>>> 

>>>> 

>>>> 

>>>> 

>>> 

>>> 

>>> --

>>> we have not sent you but as a mercy to the entire creation.

>>> holy quran, chapter 21, verse 107.

>>> in the very authentic narration from prophet Mohammad is:

>>> indeed, imam husayn is the beacon of guidance and the ark of salvation.

>>> best website for studying islamic book in different languages

>>> www.al-islam.org

>>> 

>>> 

>>> 

>>> 

>>> 

>>> 

>> 

>> 

>> 

>> 

>> .

>> 

>

 

 

--

we have not sent you but as a mercy to the entire creation.

holy quran, chapter 21, verse 107.

in the very authentic narration from prophet Mohammad is:

indeed, imam husayn is the beacon of guidance and the ark of salvation.

best website for studying islamic book in different languages

www.al-islam.org

 

 

 


Re: using form fields in word

enes sarıbaş
 

hi,

Nothing ever came of the numerous bug reports I filed, so I have lost my motivation to persue this. I will fill out the form with a sighted person.

On 11/13/2017 12:25 AM, Adriani Botez wrote:
Hey,

jaws has defined keys in browse mode for edit fields, combo boxes and so on in MS word, but the fields are not recognized by the screen reader in such a manner that it could jump between them when you press tab or e for edit fields in browse mode. So there is in fact the same issue as in NVDA.

I would really like to help you with this but there is no solution at this time. You have to find your work around with the arrow keys and ctrl + alt + arrow keys in tables to navigate between the form fields. I have the same problem at work several times.

You could create an issue on github which should propose to link form fields in MS Word to navigation key in browse mode, like in a browser. I think this would help indeed to make more people aware of this problem. Here you can create issues:

https://github.com/nvaccess/nvda/issues


All the best
Adriani



-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von enes saribas
Gesendet: Sonntag, 12. November 2017 21:45
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

hi,

Can I use the forms with a certain comertial screen reader?


On 11/12/2017 11:06 PM, Adriani Botez wrote:
NVDA


Von meinem iPhone gesendet

Am 12.11.2017 um 20:57 schrieb enes sarıbaş <enes.saribas@...>:

hi,

Is this an issue of nvda or word?


On 11/12/2017 9:51 PM, Adriani Botez wrote:
Dear Enes,

unfortunately there are lots of things which have to be improved with respect to formfields and macros in MS Word, Excel and so on. At the moment the only possibility is to navigate by arrow key. When you press left or right key you will here when the formfield starts and when it ends. I you hear for example "edit Enes" and if you press right you will here "Edit E". This is for the design Rhea. If you chose design Galathea, you will here when pressing right arrow next to a field "edit left bracket". When you here these you can start typing.

In design galathea you will not hear left bracket after you have typed something in the formfield. You will hear what you have typed in.


As far as navigation keys are concerned, there is now an issue on github about flexible browse mode which would allow you to attribute your needed functions to a preferred key in browse mode. As of now, MS Word does not support form related navigation key like in Firefox or other browsers. But let's hope that the issue will be solved in the near future.


Best
Adriani


-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von
enes saribas
Gesendet: Sonntag, 12. November 2017 19:13
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

does anyone know anything about this? This is urgent.


On 11/12/2017 5:06 PM, enes sarıbaş wrote:
hi all,

I need to create a CV in microsoft word. I am using the resume
templet in word for this. However, I cannot access the edit fields.
When tabbing through the document with browse mode on, I hear a
ding sound. Additionally, all edit fields appear to be on a single line.
Attempting to tab in forms mode in an edit field just inserts a tab
character. Furthermore, pressing e in browse mode just says
unsupported in this document. How can I manage this with nvda?
Doesn't nvda support this functionality?










Re: renaming a formatted thumb drive

Arlene
 

I fixed it. I just hit f 2 and got it’s original name back. 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Dan Beaver
Sent: November-12-17 12:43 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] renaming a formatted thumb drive

 

Hi,

 

You change its' label.  There is a DOS label command you can use or you can do it by changing it in the properties of the drive.

 

Dan Beaver

 

On 11/12/2017 3:37 PM, Arlene wrote:

hIHi list. I had a thumb drive become corrupted and I had to format it. How does one rename it? I’m senile. I tried not to do it but it wanted to be formatted. So I did it. How does one rename it again? Thanks any help will be appriciated

 


Re: renaming a formatted thumb drive

Arlene
 

I did already. Thanks. I asked a friend on the phone. I got the name back that I had it. 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Sent: November-12-17 1:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] renaming a formatted thumb drive

 

If you highlight the drive then hit F2 then you can change the name/volume/label to whatever you want

 

 

From: Arlene
Sent: 12 November 2017 20:37
To: nvda@nvda.groups.io
Subject: [nvda] renaming a formatted thumb drive

 

hIHi list. I had a thumb drive become corrupted and I had to format it. How does one rename it? I’m senile. I tried not to do it but it wanted to be formatted. So I did it. How does one rename it again? Thanks any help will be appriciated

 


Re: using form fields in word

Adriani Botez
 

Hey,

jaws has defined keys in browse mode for edit fields, combo boxes and so on in MS word, but the fields are not recognized by the screen reader in such a manner that it could jump between them when you press tab or e for edit fields in browse mode. So there is in fact the same issue as in NVDA.

I would really like to help you with this but there is no solution at this time. You have to find your work around with the arrow keys and ctrl + alt + arrow keys in tables to navigate between the form fields. I have the same problem at work several times.

You could create an issue on github which should propose to link form fields in MS Word to navigation key in browse mode, like in a browser. I think this would help indeed to make more people aware of this problem. Here you can create issues:

https://github.com/nvaccess/nvda/issues


All the best
Adriani



-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von enes saribas
Gesendet: Sonntag, 12. November 2017 21:45
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

hi,

Can I use the forms with a certain comertial screen reader?

On 11/12/2017 11:06 PM, Adriani Botez wrote:
NVDA


Von meinem iPhone gesendet

Am 12.11.2017 um 20:57 schrieb enes sarıbaş <enes.saribas@...>:

hi,

Is this an issue of nvda or word?


On 11/12/2017 9:51 PM, Adriani Botez wrote:
Dear Enes,

unfortunately there are lots of things which have to be improved with respect to formfields and macros in MS Word, Excel and so on. At the moment the only possibility is to navigate by arrow key. When you press left or right key you will here when the formfield starts and when it ends. I you hear for example "edit Enes" and if you press right you will here "Edit E". This is for the design Rhea. If you chose design Galathea, you will here when pressing right arrow next to a field "edit left bracket". When you here these you can start typing.

In design galathea you will not hear left bracket after you have typed something in the formfield. You will hear what you have typed in.


As far as navigation keys are concerned, there is now an issue on github about flexible browse mode which would allow you to attribute your needed functions to a preferred key in browse mode. As of now, MS Word does not support form related navigation key like in Firefox or other browsers. But let's hope that the issue will be solved in the near future.


Best
Adriani


-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von
enes saribas
Gesendet: Sonntag, 12. November 2017 19:13
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

does anyone know anything about this? This is urgent.


On 11/12/2017 5:06 PM, enes sarıbaş wrote:
hi all,

I need to create a CV in microsoft word. I am using the resume
templet in word for this. However, I cannot access the edit fields.
When tabbing through the document with browse mode on, I hear a
ding sound. Additionally, all edit fields appear to be on a single line.
Attempting to tab in forms mode in an edit field just inserts a tab
character. Furthermore, pressing e in browse mode just says
unsupported in this document. How can I manage this with nvda?
Doesn't nvda support this functionality?








Re: do you know one accessible, simple to use and free audiorecorder?

David Griffith
 

 

Thanks for the clarification.

I will experiment again.

My Blind Access and Guide dog Blog
http://dgriffithblog.wordpress.com/
My Blind hammer Blog
https://www.westhamtillidie.com/authors/blind-hammer/posts

 

From: Gene
Sent: 12 November 2017 18:04
To: nvda@nvda.groups.io
Subject: Re: [nvda] do you know one accessible, simple to use and free audiorecorder?

 

There is no pause.  You stop by just pressing the space bar.  you play with just the space bar.  You save the file with control w.

 

Gene

----- Original Message -----

From: zahra

Sent: Sunday, November 12, 2017 10:00 AM

Subject: Re: [nvda] do you know one accessible, simple to use and free audio recorder?

 

hi again.
how should i stop recording, pause recording or save the recorded
files after finishing?
thanks brian, gene and roger for your help and God bless all.

On 11/12/17, Roger Stewart <paganus2@...> wrote:
> You should get the lame-enc.dll file and just put it into the mp3 direct
> cut folder and that will do it.
>
> Roger
>
>
>
>
>
>
>
>
>
> On 11/12/2017 4:48 AM, Brian's Mail list account via Groups.Io wrote:
>> Looks to me like you would need to download the latest lame mp3 full
>> library to record in mp3. Not sure but just a quick read of the manual
>> suggests there is a record button and as I do not see one despite
>> setting the hardware to my sound card and only lame playback I can
>> deduce this is probably the case. If others disagree, do let us know.
>> Brian
>>
>> bglists@...
>> Sent via blueyonder.
>> Please address personal email to:-
>> briang1@..., putting 'Brian Gaff'
>> in the display name field.
>> ----- Original Message ----- From: "Brian's Mail list account via
>> Groups.Io" <bglists@...>
>> To: <nvda@nvda.groups.io>
>> Sent: Sunday, November 12, 2017 10:02 AM
>> Subject: Re: [nvda] do you know one accessible, simple to use and free
>> audio recorder?
>>
>>
>>> What system are you running it on? I'd have thought, like many of
>>> these programs they have to know what to record from in the first
>>> place so there should be some kind of set up system for it. I've not
>>> used it myself, but xp sound and 7 sound and later work in different
>>> ways, which is why quickmix won't work after XP.
>>> Brian
>>>
>>> bglists@...
>>> Sent via blueyonder.
>>> Please address personal email to:-
>>> briang1@..., putting 'Brian Gaff'
>>> in the display name field.
>>> ----- Original Message ----- From: "zahra" <nasrinkhaksar3@...>
>>> To: <nvda@nvda.groups.io>
>>> Sent: Sunday, November 12, 2017 7:01 AM
>>> Subject: Re: [nvda] do you know one accessible, simple to use and
>>> free audio recorder?
>>>
>>>
>>> hi again every one specially gene and roger.
>>> thanks extremely for your help, mp3 direct cut is exactly the software
>>> that i need.
>>> but the only problem for me is i cant record anything.
>>> i only can delete the unnecessary part of my sounds.
>>> what should i do to record mp3 with it?
>>>
>>>
>>> On 11/12/17, Gene <gsasner@...> wrote:
>>>> But all the person wants to do is work with MP3 files.  Audacity is
>>>> a more
>>>> complex program and just for recording and editing MP3 files, MP3
>>>> direct Cut
>>>> is a bettter choice.
>>>>
>>>> Gene
>>>> ----- Original Message -----
>>>>
>>>> From: Mr. Wong Chi Wai, William
>>>> Sent: Saturday, November 11, 2017 11:05 PM
>>>> To: nvda@nvda.groups.io
>>>> Subject: Re: [nvda] do you know one accessible, simple to use and
>>>> free audio
>>>> recorder?
>>>>
>>>>
>>>> for me, I would use audicity
>>>>
>>>>
>>>>
>>>> Gene 12/11/2017 4:40 寫道:
>>>>
>>>>   Mp3 Direct Cut meets all your requirements.
>>>>
>>>>   Gene
>>>>   ----- Original Message -----
>>>>
>>>>
>>>>   From: Brian's Mail list account via Groups.Io
>>>>   Sent: Saturday, November 11, 2017 1:37 PM
>>>>   To: nvda@nvda.groups.io
>>>>   Subject: Re: [nvda] do you know one accessible, simple to use and
>>>> free
>>>> audio recorder?
>>>>
>>>>
>>>>   Depends what you call simple. Many do record but as often when you
>>>> do this
>>>>
>>>>   you next need to edit the files, then I'd still use a program like
>>>> audacity
>>>>   or if you can afford a little beit Goldwave.
>>>>    There is virtual recorder but not tested it on XP as I think its
>>>> aimed at
>>>>
>>>>   those with sound cards that you cannot record streams from etc.
>>>>
>>>>   If you have a mobile phone, just press record is your thing.
>>>>    Brian
>>>>
>>>>   bglists@...
>>>>   Sent via blueyonder.
>>>>   Please address personal email to:-
>>>>   briang1@..., putting 'Brian Gaff'
>>>>   in the display name field.
>>>>   ----- Original Message -----
>>>>   From: "zahra" <nasrinkhaksar3@...>
>>>>   To: <nvda@nvda.groups.io>
>>>>   Sent: Saturday, November 11, 2017 6:46 PM
>>>>   Subject: [nvda] do you know one accessible, simple to use and free
>>>> audio
>>>>   recorder?
>>>>
>>>>
>>>>   > hello every one.
>>>>   > i need one program which can record mp3, be freeware or opensource,
>>>>   > safe, reliable, simple to use, supports all windows versions
>>>> since xp,
>>>>   > accessible and if possible, without extra software offering.
>>>>   > except jetaudio that i realy cant use, please help me.
>>>>   > God bless you all!
>>>>   >
>>>>   > --
>>>>   > we have not sent you but as a mercy to the entire creation.
>>>>   > holy quran, chapter 21, verse 107.
>>>>   > in the very authentic narration from prophet Mohammad is:
>>>>   > indeed, imam husayn is the beacon of guidance and the ark of
>>>> salvation.
>>>>   > best website for studying islamic book in different languages
>>>>   > www.al-islam.org
>>>>   >
>>>>   >
>>>>   >
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> we have not sent you but as a mercy to the entire creation.
>>> holy quran, chapter 21, verse 107.
>>> in the very authentic narration from prophet Mohammad is:
>>> indeed, imam husayn is the beacon of guidance and the ark of salvation.
>>> best website for studying islamic book in different languages
>>> www.al-islam.org
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>> .
>>
>
>
>
>
>


--
we have not sent you but as a mercy to the entire creation.
holy quran, chapter 21, verse 107.
in the very authentic narration from prophet Mohammad is:
indeed, imam husayn is the beacon of guidance and the ark of salvation.
best website for studying islamic book in different languages
www.al-islam.org


 


Re: renaming a formatted thumb drive

Chris
 

If you highlight the drive then hit F2 then you can change the name/volume/label to whatever you want

 

 

From: Arlene
Sent: 12 November 2017 20:37
To: nvda@nvda.groups.io
Subject: [nvda] renaming a formatted thumb drive

 

hIHi list. I had a thumb drive become corrupted and I had to format it. How does one rename it? I’m senile. I tried not to do it but it wanted to be formatted. So I did it. How does one rename it again? Thanks any help will be appriciated

 


Re: using form fields in word

enes sarıbaş
 

hi,

Can I use the forms with a certain comertial screen reader?

On 11/12/2017 11:06 PM, Adriani Botez wrote:
NVDA


Von meinem iPhone gesendet

Am 12.11.2017 um 20:57 schrieb enes sarıbaş <enes.saribas@...>:

hi,

Is this an issue of nvda or word?


On 11/12/2017 9:51 PM, Adriani Botez wrote:
Dear Enes,

unfortunately there are lots of things which have to be improved with respect to formfields and macros in MS Word, Excel and so on. At the moment the only possibility is to navigate by arrow key. When you press left or right key you will here when the formfield starts and when it ends. I you hear for example "edit Enes" and if you press right you will here "Edit E". This is for the design Rhea. If you chose design Galathea, you will here when pressing right arrow next to a field "edit left bracket". When you here these you can start typing.

In design galathea you will not hear left bracket after you have typed something in the formfield. You will hear what you have typed in.


As far as navigation keys are concerned, there is now an issue on github about flexible browse mode which would allow you to attribute your needed functions to a preferred key in browse mode. As of now, MS Word does not support form related navigation key like in Firefox or other browsers. But let's hope that the issue will be solved in the near future.


Best
Adriani


-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von enes saribas
Gesendet: Sonntag, 12. November 2017 19:13
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

does anyone know anything about this? This is urgent.


On 11/12/2017 5:06 PM, enes sarıbaş wrote:
hi all,

I need to create a CV in microsoft word. I am using the resume
templet in word for this. However, I cannot access the edit fields.
When tabbing through the document with browse mode on, I hear a ding
sound. Additionally, all edit fields appear to be on a single line.
Attempting to tab in forms mode in an edit field just inserts a tab
character. Furthermore, pressing e in browse mode just says
unsupported in this document. How can I manage this with nvda? Doesn't
nvda support this functionality?








Re: renaming a formatted thumb drive

Dan Beaver
 

Hi,


You change its' label.  There is a DOS label command you can use or you can do it by changing it in the properties of the drive.


Dan Beaver


On 11/12/2017 3:37 PM, Arlene wrote:

hIHi list. I had a thumb drive become corrupted and I had to format it. How does one rename it? I’m senile. I tried not to do it but it wanted to be formatted. So I did it. How does one rename it again? Thanks any help will be appriciated



renaming a formatted thumb drive

Arlene
 

hIHi list. I had a thumb drive become corrupted and I had to format it. How does one rename it? I’m senile. I tried not to do it but it wanted to be formatted. So I did it. How does one rename it again? Thanks any help will be appriciated


Re: do you know one accessible, simple to use and free audio recorder?

Deborah Armstrong <debee@...>
 

I missed the beginning of this thread, but for nearly twenty years I've just loved TotalRecorder. Even its video recording ability is pretty accessible and the documentation is superb. It has run on everything from Windows 98 up to Windows 10 and will record with external Mic, external dubbing cable (sometimes called Aux or patchcord.) and of course will record audio from the PC. It's most popular for recording internet radio but I use it for much more.


You need to pay a small fee to continue to use it; there are several versions, each costing more and offering more features. And it's easier to use, if you really do read the documentation. But it's completely accessible, no dialogs or screens that a screen reader fails to let you review. It can even record your screen reader, or not, as you prefer. And I paid $10 for it twenty years ago and still get fantastic support. You pay for it only once.


--Debee


Re: using form fields in word

Adriani Botez
 

NVDA


Von meinem iPhone gesendet

Am 12.11.2017 um 20:57 schrieb enes sarıbaş <enes.saribas@...>:

hi,

Is this an issue of nvda or word?


On 11/12/2017 9:51 PM, Adriani Botez wrote:
Dear Enes,

unfortunately there are lots of things which have to be improved with respect to formfields and macros in MS Word, Excel and so on. At the moment the only possibility is to navigate by arrow key. When you press left or right key you will here when the formfield starts and when it ends. I you hear for example "edit Enes" and if you press right you will here "Edit E". This is for the design Rhea. If you chose design Galathea, you will here when pressing right arrow next to a field "edit left bracket". When you here these you can start typing.

In design galathea you will not hear left bracket after you have typed something in the formfield. You will hear what you have typed in.


As far as navigation keys are concerned, there is now an issue on github about flexible browse mode which would allow you to attribute your needed functions to a preferred key in browse mode. As of now, MS Word does not support form related navigation key like in Firefox or other browsers. But let's hope that the issue will be solved in the near future.


Best
Adriani


-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von enes saribas
Gesendet: Sonntag, 12. November 2017 19:13
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

does anyone know anything about this? This is urgent.


On 11/12/2017 5:06 PM, enes sarıbaş wrote:
hi all,

I need to create a CV in microsoft word. I am using the resume
templet in word for this. However, I cannot access the edit fields.
When tabbing through the document with browse mode on, I hear a ding
sound. Additionally, all edit fields appear to be on a single line.
Attempting to tab in forms mode in an edit field just inserts a tab
character. Furthermore, pressing e in browse mode just says
unsupported in this document. How can I manage this with nvda? Doesn't
nvda support this functionality?










Re: using form fields in word

enes sarıbaş
 

hi,

Is this an issue of nvda or word?

On 11/12/2017 9:51 PM, Adriani Botez wrote:
Dear Enes,

unfortunately there are lots of things which have to be improved with respect to formfields and macros in MS Word, Excel and so on. At the moment the only possibility is to navigate by arrow key. When you press left or right key you will here when the formfield starts and when it ends. I you hear for example "edit Enes" and if you press right you will here "Edit E". This is for the design Rhea. If you chose design Galathea, you will here when pressing right arrow next to a field "edit left bracket". When you here these you can start typing.

In design galathea you will not hear left bracket after you have typed something in the formfield. You will hear what you have typed in.


As far as navigation keys are concerned, there is now an issue on github about flexible browse mode which would allow you to attribute your needed functions to a preferred key in browse mode. As of now, MS Word does not support form related navigation key like in Firefox or other browsers. But let's hope that the issue will be solved in the near future.


Best
Adriani


-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von enes saribas
Gesendet: Sonntag, 12. November 2017 19:13
An: nvda@nvda.groups.io
Betreff: Re: [nvda] using form fields in word

does anyone know anything about this? This is urgent.


On 11/12/2017 5:06 PM, enes sarıbaş wrote:
hi all,

I need to create a CV in microsoft word. I am using the resume
templet in word for this. However, I cannot access the edit fields.
When tabbing through the document with browse mode on, I hear a ding
sound. Additionally, all edit fields appear to be on a single line.
Attempting to tab in forms mode in an edit field just inserts a tab
character. Furthermore, pressing e in browse mode just says
unsupported in this document. How can I manage this with nvda? Doesn't
nvda support this functionality?