Date   
Re: I can't get NVDA's synthesizer to read Mexican currency as

Quentin Christensen
 

Hi Gera,

I'll grab the low hanging fruit off this one, which is that the synthesizer will add its own pronunciation to things, as it appears to be doing for USD$230.  You can add your own entry into the speech dictionary (it's speech dictionary you want rather than punctuation/symbol pronunciation).  You will likely be best using Regex to format it so you can look for the string "mxn$" followed by a number, and I must confess, my Regex is a bit rusty so I'll leave the exact syntax for someone else to hopefully help with!

Kind regards

Quentin.

On Wed, Dec 13, 2017 at 3:22 AM, Gerardo Corripio <gera1027@...> wrote:
Using NVDA's Vocalizer, where or how would I make NVDA to read this Mxn$3800 as 3800 Mexican pesos? I ask this because when typing in for instance USD$230 it reads exactly right as I'd like for the Mexican currency to read. I tried putting into the pronounciation dictionary but it didn't work. any ideas?

--
Gera
Enviado desde Thunderbird







--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

Re: booleted items not being spoken in nvdasymbols like bullets and

Dan Thompson
 

Thank you many times for your tip.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriani Botez
Sent: Sunday, December 10, 2017 10:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] booleted items not being spoken in nvdasymbols like bullets and

 

Enable  lists in document formating settings.

 

 

Best

Adriani

 

Von meinem iPhone gesendet


Am 09.12.2017 um 15:42 schrieb Dan Thompson <dmt031073@...>:

Hi All,

When in Word 2010 and adding bullets, they are not spoken when going back to check if the bullet is present.

I have tried the settings of all punctuation, some and most and the indication of a bullet being  present is still not spoken.  Am I changing the wrong setting.

Thanks for your advice and have a great holiday season.with now change in

Re: Just a word of warning

Lino Morales
 

Check your spam folder Bryan and watch some Monty Pithon while your at it LOL! Spam is a wonderful meat in a can.

On 12/11/2017 12:42 PM, Brian's Mail list account via Groups.Io wrote:
I seem to be missing some posts to this list in my email, as I can see replies to some where the original is not there. Don't have time to go furtling about on the web site and it will probably get rectified soon so if anyone has asked me anything or I appear thick  that either means I am thick or I did not see the original!
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

Alex

Lino Morales
 

At&T holds the copyright for Alex I believe.

On 12/11/2017 12:28 PM, Brian's Mail list account via Groups.Io wrote:
If it is Alex then you will need to find out who owns the copyright. It may well be that Apple wanted at least some voices only they have, and hence anyone else using it would no doubt get sued to within an inch of their wallets.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Jessica D" <jldail13@...>
To: <nvda@nvda.groups.io>
Sent: Monday, December 11, 2017 1:44 PM
Subject: Re: [nvda] iPhone's Siri Male US English voice for use with NVDA?


Hi,
I wants had a copy of the Alex voice that worked with Anna VDA. It wasn't a full-fledged voice though. It could read a few things, but that's about it. Really wish someone would make one that was full-fledged. If it existed, I would download it in a heartbeat.

Sent from my Apple Watch

On Dec 11, 2017, at 8:30 AM, Damien Sykes <damien@...> wrote:

Hi,
Are you sure it's a Vocaliser voice and not one made by Apple? Apple recently started putting their own voices onto iOS, like Alex and so on.
Cheers.
Damien.
-----Original Message----- From: Gerardo Corripio
Sent: Monday, December 11, 2017 1:25 PM
To: nvda@nvda.groups.io
Subject: [nvda] iPhone's Siri Male US English voice for use with NVDA?

I'm looking for the Siri Male iPhone voice (or its equivalent) on
Tiflotecnia's Vocalizer Voices page, to use especially for reading, with
NVDA, but it's not there. Might it be that's not been added yet? It'd be
a dream come true if I could have it. Thanks for info.

--
Gera
Enviado desde Thunderbird








Re: Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?

Lino Morales
 

Joseph I really think you should record this.


On 12/9/2017 11:53 AM, Joseph Lee wrote:

Dear global NVDA community,

 

After reading recent threads on various NVDA lists and looking at some tweets, I find myself asking if I should do it again: record the 2018 edition of the popular “Welcome to NVDA” tutorials set. The thing is, there are more superb tutorials out now, including NV Access’s own Basic Training module. I do understand that many folks have come to know NVDA through my tutorials and some tutorials used mine as a reference or a guide.

 

For reference, the 2015 edition of this tutorials set can be found at:

http://www.josephsl.net/tutorials

 

If the community says I should record the 2018 edition, it’ll be done with some conditions:

 

  • The tutorial will be based on a combination of 2017.4 and latest snapshot features.
  • I’ll be using Windows 10 Version 1709 (Fall Creators Update).
  • I will not ask for payment for this set; if you insist on paying me, I’d rather ask you to donate to NV Access.
  • If possible, I’ll come up with a text transcript and a way for folks to provide edits via pull requests on GitHub.
  • I’ll be moving away from Internet Explorer for browse mode demonstrations, opting for Firefox and Microsoft Edge.

 

Below is a list of changes between 2015 and 2018 editions provided you say I should do it:

 

  • I’ll be using Windows OneCore voices for most speech demos.
  • Chapter 1 (Intro) will be expanded and re-recorded to improve recording quality, as well as adding additional information such as command line switches to start a portable copy after creating one and a note on Controlled Folder Access.
  • Chapter 2 (Basics) will go over more touchscreen possibilities, some command changes (including copying the contents of status bars) and others.
  • Chapter 3 (Objects and object navigation) will feature new examples, especially more universal app examples.
  • Chapter 4 (Browsing the web) will feature reading PDF documents with Microsoft Edge, turning off single letter navigation commands on the fly and elements list improvements.
  • Chapter 5 (Apps) will feature new and updated examples.
  • Chapters 6 and 7 (Configuration) will feature new settings, including Windows 10 OCR and many others.
  • Chapter 8 (tools) will feature content recognition.
  • Chapter 9 (Add-ons) will feature new and updated examples, including Remote Support add-on.
  • Addenda may include a word on ARM64 support, development snapshots and what not.

 

Comments are appreciated.

Cheers,

Joseph


Re: Just a word of warning

Sarah k Alawami
 

Gmail actually are Lmissing with filters. The replies are not missing or me they are just in different folders and I have to hunt them down and move them myself using apple mail. Not too bad but annoying.

Take care

On Dec 11, 2017, at 9:42 AM, Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io> wrote:

I seem to be missing some posts to this list in my email, as I can see replies to some where the original is not there. Don't have time to go furtling about on the web site and it will probably get rectified soon so if anyone has asked me anything or I appear thick that either means I am thick or I did not see the original!
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.


Re: Parenthesis

 

Hi,

Or, the employer should at least let you use Narrator (provided this is a Windows 10 computer).

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Rayn Darren
Sent: Tuesday, December 12, 2017 12:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Parenthesis

 

I realize you cannot load anything not required for your job on your machine at work, however, as accessibility is part of your job, it could be argued that NVDA or the trial version of Jaws as well as a magnifier program would in fact be a necessity. That being said, you could always load it onto your personal computer and have a look round at settings.

 

Rayn

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of tonea.ctr.morrow@...
Sent: Tuesday, December 12, 2017 8:35 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Parenthesis

 

No, actually, I can’t. I work on a contract with the United States Government, so I only have on the computer what I am given, and that does not include any screen-reading software. I am sighted. I write help manuals and help files for software that other people write. I have sentences like this:

 

The second zoom method is to hold the control key while pressing + (plus) to zoom in or while pressing – (minus) to zoom out.

 

To a sighted person, the word “plus” in parenthesis clarifies that the symbol it follows is a plus symbol, just as the word “minus” in parenthesis clarifies that the symbol it follows in a minus symbol and not a hyphen or an em-dash or some other symbol. I literally need to know how your screen reader treats words or phrases that are in parenthesis so I can write to take your perception into account. The example above, combined with the previous example I gave will help a lot.

 

Tonea (by the way, it is pronounced Toe knee uh, with the accent on the knee.)

 

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Antony Stone
Sent: Tuesday, December 12, 2017 10:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Parenthesis

 

Um, can't you just type a paragraph such as the one you wrote, into a text editor, and then get NVDA to read it back to you, so you can tell for yourself?

 

Bear in mind though that this might be one of those things that varies according to the speech synthesiser in use, so different users might get different effects - but at least whatever the effect is will be the same for each person as they always get for that type of input, so they should be used to it.

 

 

Antony.

 

 

Virus-free. www.avast.com

Re: Bouncing emails.

Sarah k Alawami
 

They fixed the issue actually according to the groups.io beta and forum list I'm on.

Take care

On Dec 12, 2017, at 1:59 AM, Brian's Mail list account via Groups.Io <bglists@...> wrote:

This happens every so often. To my mind it is usually due to the isp you are with subscribing to a black list service of mail servers. If the mail server used by a mail list gets onto one of these the isp bounces the emails to you back and the system then uses a different server to email you the information about it. Then you need to take the action and attempt to restart the email list again, in the hope that the black list listing has been removed by then. In the meantime you have of course lost access to the list so cannot read it unless you read it via the web site.
Its quite good and works well. However sometimes ISPs tend to not bounce and simply dump emails and this can be a real problem as the other end does not know you are not getting the emails.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "John Isige" <gwynn@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, December 12, 2017 2:40 AM
Subject: [nvda] Bouncing emails.


Here's the text of the message. It's singularly uninformative.


Hello,
Recently, emails sent to you have bounced back to us. This can be for many reasons, including:
- We have an incorrect email address for you.
- Your account was or is full.
- Other temporary delivery issues.
We have suspended email delivery to you. This means you will no longer receive messages from the groups you are subscribed to, including:
- nvda
You must take action to restore your account, or we will unsubscribe you from all of the groups you are a member of.
To unbounce your account, go to the following link:
(link gibberish redacted)
Thank you,
The Groups.io Team





Re: Parenthesis

Rayn Darren
 

I realize you cannot load anything not required for your job on your machine at work, however, as accessibility is part of your job, it could be argued that NVDA or the trial version of Jaws as well as a magnifier program would in fact be a necessity. That being said, you could always load it onto your personal computer and have a look round at settings.

 

Rayn

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of tonea.ctr.morrow@...
Sent: Tuesday, December 12, 2017 8:35 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Parenthesis

 

No, actually, I can’t. I work on a contract with the United States Government, so I only have on the computer what I am given, and that does not include any screen-reading software. I am sighted. I write help manuals and help files for software that other people write. I have sentences like this:

 

The second zoom method is to hold the control key while pressing + (plus) to zoom in or while pressing – (minus) to zoom out.

 

To a sighted person, the word “plus” in parenthesis clarifies that the symbol it follows is a plus symbol, just as the word “minus” in parenthesis clarifies that the symbol it follows in a minus symbol and not a hyphen or an em-dash or some other symbol. I literally need to know how your screen reader treats words or phrases that are in parenthesis so I can write to take your perception into account. The example above, combined with the previous example I gave will help a lot.

 

Tonea (by the way, it is pronounced Toe knee uh, with the accent on the knee.)

 

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Antony Stone
Sent: Tuesday, December 12, 2017 10:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Parenthesis

 

Um, can't you just type a paragraph such as the one you wrote, into a text editor, and then get NVDA to read it back to you, so you can tell for yourself?

 

Bear in mind though that this might be one of those things that varies according to the speech synthesiser in use, so different users might get different effects - but at least whatever the effect is will be the same for each person as they always get for that type of input, so they should be used to it.

 

 

Antony.

 


Virus-free. www.avast.com

Re: how to read a popup window on a web page

Rusty Perez
 

Well, I think I figured it out.
This site is sometimes glitchy and loads slowly on my machine.
I tried it again just now. The page loaded up and I am now able to
find the song lyrics just by navigating by headings.
I think that before, I was trying to navigate to the lyrics before
they were actually loaded on to the page.
When my wife was looking, I guess maybe I didn't try headings at that time.

Rusty

On 12/12/17, Rusty Perez <rustys.lists@...> wrote:
Hey Hermann,
Thanks!
the site is
frettie.com


There will be songs available when you first go to the page.
Search for the word "play" and you should find some songs to check
out. Press enter on a song name to bring up a page dedicated to the
song. Then search for the "lyrics" link.

Thanks!
Rusty

On 12/12/17, Hermann-Josef Kurzen <ymh005@...> wrote:
Hey Rusty,

to which site for songwriters are You subscribed?
I am using NVDA as well.
I will have a try on the site.


Greetings - Hermann





■■■


Gesendet: Dienstag, 12. Dezember 2017 um 18:05 Uhr
Von: "Rusty Perez" <rustys.lists@...>
An: nvda@nvda.groups.io
Betreff: [nvda] how to read a popup window on a web page

Hey folks,
I am subscribed to a site for songwriters. Part of the site allows one
to read the song lyrics to a song that is playing. The lyrics come up
in an overlay or window of some sort and I can't figure out how to
read it with NVDA.
If my wife runs the mouse over the lyrics, NVDA does read them, but I
can't figure out how to get to this lyrics window on my own.
Any thoughts or suggestions?

Thanks!
Rusty







Re: Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?

Scott VanDeWalle
 

Hi, okay, for now I will just stay put where I’m at then with windows installations.smile

 

Have a nice day

 

Scott

Sent from Mail for Windows 10

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Joseph Lee <joseph.lee22590@...>
Sent: Monday, December 11, 2017 9:42:59 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?
 

Hi,

Slow ring: 99% of the content will apply to 1709 as well as on Insider builds.

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Scott VanDeWalle
Sent: Monday, December 11, 2017 2:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?

 

Hey Joseph.

I’m interested to know if one is on the insider slow ring, can I still benefit from this new tutorial you are wishing to do?

If not, I will re install the official build.

Also I’m currently going through some of the sections on the last one, and I’m wondering why I didn’t do this before, I’m sure I’ll learn some new stuff.  Smile

Ttyl

 

Scott

 

Sent from Mail for Windows 10

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Joseph Lee <joseph.lee22590@...>
Sent: Saturday, December 9, 2017 7:43:43 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?

 

Hi all, mostly for Brian,

If you want to get a “preview” of what I’m thinking of doing, take a look at Windows 10 build series (same website as my current tutorials), especially the very last one (build 17025). That should give folks an idea as to what the “tutorial set” could sound like.

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, December 9, 2017 4:37 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?

 

I don't think it’s a good idea to have the voice be painfully slow, as accomodating new users might be for more experienced users.  I would suggest doing what I do in tutorials.  I have the speech speak at a good rate for experienced users, but I repeat things that are said so the inexperienced listener will know what has been said.  I haven't done a tutorial in quite some time and I don't recall if I say everything or just about everything the speech says, but I repeat everything as I move through a dialog, a ribbon, a menu, etc.  I repeat everything that matters so users can tell what they need to know.  My system accomodates both new and experienced synthesized speech users..

 

Gene

----- Original Message -----

Sent: Saturday, December 09, 2017 5:47 PM

Subject: Re: [nvda] Request for comments: Should I record 2018 edition of Welcome to NVDA tutorials set?

 

OK, 1 make sure the voice is slow enough for new users. Most of the
tutorials I hear on the internet are using voices running way too fast.
 Next, I think that a little time needs to be spent in the snapshot tutorial
about how to use Github without going bald. I am not that thick but I still
find it cluttered and very hard to use.

Is Edge really any better for pdfs than Adobe? The big issue is as we all
know the clueless people who compile them with no tagging of content reading
order changes.

Firefox. Would you be using ESR or attempting to cover the new Quantum
version which even when it can be made to function is still like a duck with
a broken leg. OK in the water but tends to swim in circles a lot!


Also of course I know that you are about to embark in a major  upgrade to
nvda to use a version of Python better able to cope with newer systems, and
this is bound to start throwing unexpected spanners into the air to fall who
knows where for a while, so its a good time to get folk used to diagnosing
and working around any problems by giving them a bit of a lesson in the
logic to find where problems might be etc.
 Just my few penneths worth.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Joseph Lee" <joseph.lee22590@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, December 09, 2017 4:53 PM
Subject: [nvda] Request for comments: Should I record 2018 edition of
Welcome to NVDA tutorials set?


> Dear global NVDA community,
>
>
>
> After reading recent threads on various NVDA lists and looking at some
> tweets, I find myself asking if I should do it again: record the 2018
> edition of the popular "Welcome to NVDA" tutorials set. The thing is,
> there
> are more superb tutorials out now, including NV Access's own Basic
> Training
> module. I do understand that many folks have come to know NVDA through my
> tutorials and some tutorials used mine as a reference or a guide.
>
>
>
> For reference, the 2015 edition of this tutorials set can be found at:
>
> http://www.josephsl.net/tutorials
>
>
>
> If the community says I should record the 2018 edition, it'll be done with
> some conditions:
>
>
>
> * The tutorial will be based on a combination of 2017.4 and latest
> snapshot features.
> * I'll be using Windows 10 Version 1709 (Fall Creators Update).
> * I will not ask for payment for this set; if you insist on paying me,
> I'd rather ask you to donate to NV Access.
> * If possible, I'll come up with a text transcript and a way for folks
> to provide edits via pull requests on GitHub.
> * I'll be moving away from Internet Explorer for browse mode
> demonstrations, opting for Firefox and Microsoft Edge.
>
>
>
> Below is a list of changes between 2015 and 2018 editions provided you say
> I
> should do it:
>
>
>
> * I'll be using Windows OneCore voices for most speech demos.
> * Chapter 1 (Intro) will be expanded and re-recorded to improve
> recording quality, as well as adding additional information such as
> command
> line switches to start a portable copy after creating one and a note on
> Controlled Folder Access.
> * Chapter 2 (Basics) will go over more touchscreen possibilities, some
> command changes (including copying the contents of status bars) and
> others.
> * Chapter 3 (Objects and object navigation) will feature new examples,
> especially more universal app examples.
> * Chapter 4 (Browsing the web) will feature reading PDF documents with
> Microsoft Edge, turning off single letter navigation commands on the fly
> and
> elements list improvements.
> * Chapter 5 (Apps) will feature new and updated examples.
> * Chapters 6 and 7 (Configuration) will feature new settings,
> including Windows 10 OCR and many others.
> * Chapter 8 (tools) will feature content recognition.
> * Chapter 9 (Add-ons) will feature new and updated examples, including
> Remote Support add-on.
> * Addenda may include a word on ARM64 support, development snapshots
> and what not.
>
>
>
> Comments are appreciated.
>
> Cheers,
>
> Joseph
>
>

Re: Parenthesis

Gene
 

I don't know if any screen-readers let you make any such adjustments.  By default, none of what you were told is correct.
 
Gene

----- Original Message -----
Sent: Tuesday, December 12, 2017 11:47 AM
Subject: Re: [nvda] Parenthesis

I had asked about parenthesis because someone had told me that the screen reader speaks capitalization differently than regular letters. For example, ALL CAPS IN A SENTENCE causes the reader to say those words with “emphasis” or to yell. I didn’t know there were punctuation settings. I just wondered if words in parenthesis were whispered or otherwise spoken differently.

 

Thanks!

 

Tonea

 

Re: Parenthesis

Devin Prater
 

All caps are not read any differently than any other text.

Devin Prater
Assistive Technology instructor in training, JAWS Sertified.

On Dec 12, 2017, at 12:29 PM, Kwork <istherelife@...> wrote:

With my punctuation set to some, it pauses on either side of the parenthesis. A comma does the same thing, so I would have to guess which is a paren and which a comma. Not that big a deal for me. If I really want to know, I'll investigate on my own. I don't know about other punctuation levels as about all I use is some, so others would be able to answer that better.
----- Original Message -----
Sent: Tuesday, December 12, 2017 9:12 AM
Subject: [nvda] Parenthesis

How does the software treat parenthesis (such as this) when it does speech? How does it convey to the listener that the comment (possibly unimportant) is an aside comment? I need to know so I can understand how my audience will hear it, both literally and figuratively.

 

Thanks!

 

Tonea

 

Re: turning up the volume in youtube

Tony Ballou
 

Hey Gene,


Thanks buddy. Will keep this in mind. 


Tony


On 12/11/2017 1:55 PM, Gene wrote:
You don't have to work with these sliders and it's easier and more efficient not to.  From the top of the page, type the letter b until you get to something like the pause button.  That will mean that you are in the player interface.  Turn off browse mode with NVDA key space.
use up and down arrow to raise and lower the volume
.  To jump forward or back in a playing track, use right or left arrow.
Use main keyboard numbers 1 through nine to jump from one percent of the file to various percents.
1 is ten percent.  2 is twenty percent, etc.  0 starts play over from the start of the file and if the file has finished, pressing 0 will start play at the beginning again.  I haven't tested to see if other numbers resume play, once over, from those percents.
 
Gene
----- Original Message -----
Sent: Monday, December 11, 2017 11:59 AM
Subject: Re: [nvda] turning up the volume in youtube

Hi Rose Marie,


On the you tube web page, there's a couple of sliders for the player. 
the first one is for moving backward and forward through the file you
are watching, and the second one is the one for increasing and
decreasing the volume. When you land on these sliders, NVDA will go into
browse mode initially but you can tab through the controls until you
find the volume slider and adjust it to your liking. Hope this helps.


Tony


On 12/8/2017 5:25 PM, Rosemarie Chavarria wrote:

> Hi, everyone,
>
> I'm trying to watch a movie on youtube but the volume is quite low. How do I
> turn it up without having to turn up my speakers?
>
> Thanks for your helpp in advance.
>
> Rosemarie
>
>
>
>
>
>





Re: Question about converting pdf files to csv

Tony Ballou
 

Hi Cearbhall,


Thanks, Good stuff here, will add this tip to my personal bag as well.


Tony

On 12/11/2017 4:05 PM, Cearbhall O'Meadhra wrote:
Jessica,

I just succeeded in converting a PDF file into CSV with the following steps:
1. Open the PDF file with Microsoft Word:
Press the Application key and ignore the "Open with adobe" and go on down to "Open with " and press right-arrow and then down-arrow to "Word" and press Enter.

2. Let Word open and press "OK" on all announcements that appear. Then press control+Home to move to the top of the open document followed by control+shift+End to highlight everything. Then press control+c to copy all to the clipboard.

3. Open Excel. An empty worksheet should appear. Make sure you are in cell "A1". Then press control+v to paste the contents of the clipboard into the open worksheet. Make sure the file looks right to you at this stage just in case you need to correct anything.

4. Press the following sequence of keystrokes (one after the other):
alt>f>a>o
The traditional "Save As" dialog will appear. Change the type of file to
"CSV (Comma delimited) (*.csv)"
and the job is done!

Sorry if my instructions are too detailed. I don't know how familiar you are with keystroke control.

All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...


-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Tony Ballou
Sent: Monday, December 11, 2017 6:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Question about converting pdf files to csv

Hi,


Try this online converter and see if it works. I haven't used it in some time but they're still around converting files.


www.zamzar.com/convert/pdf-to-csv/


Tony


On 12/8/2017 12:57 PM, Jessica D wrote:
Hi,
I need to convert pdf files to csv.
what's the best, and most accessible way to do this?

Thanks,
Jessica






Re: Parenthesis

Kwork
 

With my punctuation set to some, it pauses on either side of the parenthesis. A comma does the same thing, so I would have to guess which is a paren and which a comma. Not that big a deal for me. If I really want to know, I'll investigate on my own. I don't know about other punctuation levels as about all I use is some, so others would be able to answer that better.

----- Original Message -----
Sent: Tuesday, December 12, 2017 9:12 AM
Subject: [nvda] Parenthesis

How does the software treat parenthesis (such as this) when it does speech? How does it convey to the listener that the comment (possibly unimportant) is an aside comment? I need to know so I can understand how my audience will hear it, both literally and figuratively.

 

Thanks!

 

Tonea

 

Re: Caption location

Antony Stone
 

It could be helpful if you let us know which guidelines you are working with
(the ones which "say that blind-friendly places information...").

Incidentally, I very strongly agree with Joseph Lee's recommendation that you
ask your employer to install (or let you install) NVDA on your machine. If
you are trying to create accessible materials in your job, you need an
accessibility tool to let you know whether you're getting it right.

After all, would they ask you to create HTML pages without providing you with
a browser to view them in?


Antony.

On Tuesday 12 December 2017 at 18:43:55, tonea.ctr.morrow@... wrote:

I know that each of you are being very patient with my questions. I
appreciate that.

Guidelines say that blind-friendly places information about a graphic prior
to the graphic. But, the software I use put the caption for the graphic in
an HTML caption tag, which places it under or after the graphic. Are they
equivalent or is one better than the other?

Tonea
--
"Remember: the S in IoT stands for Security."

- Jan-Piet Mens

Please reply to the list;
please *don't* CC me.

Re: Caption location

 

Hi Tonea,

It doesn’t really matter as long as the screen reader can read captions (provided the author and/or the program did it correctly).

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of tonea.ctr.morrow@...
Sent: Tuesday, December 12, 2017 9:44 AM
To: nvda@nvda.groups.io
Subject: [nvda] Caption location

 

I know that each of you are being very patient with my questions. I appreciate that.

 

Guidelines say that blind-friendly places information about a graphic prior to the graphic. But, the software I use put the caption for the graphic in an HTML caption tag, which places it under or after the graphic. Are they equivalent or is one better than the other?

 

Tonea

Re: win10 essentials add-on update?

Angela Delicata
 

Hi,

I downloaded Windows 10 App Essentials and  it seems to do many things!

I just want to say nvda works much much better than Jaws on Windows 10  and for this reason I decided to do a small donation: for the time being it is very little, but I plan to do more in the future.

You really deserve our  help and hope nvda will continue to be developed: really  much  better than Jaws nowadays: it has become my  primary  screen reader and I never ever thought this could have been possible... I also know friends of mine who work with nvda and find it good.

So, please keep on like this and I know thanking will be never enough because people like you are those who deserve to be praised for what they do...


Ciao

Angela from Italy

Il 12/12/2017 18:13, Joseph Lee ha scritto:
Hi,
And much more. Basically, anyone using Windows 10 should install this add-on. In addition to providing some enhancements for Windows 10 users, with help from this add-on, NVDA supports one or two new features included in latest Windows 10 development builds.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Mary Otten
Sent: Tuesday, December 12, 2017 9:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] win10 essentials add-on update?

That add-on covers a lot of different things. Best advice is to go to the nvda community add-ons page and read all about the various things this one does.


Mary


On 12/12/2017 9:06 AM, Angela Delicata wrote:
Hi,

I would like to try this add-on: please, remind me what it is for smile.

Thank you.

Angela from Italy



Il 12/12/2017 16:07, Mary Otten ha scritto:
Yesterday, I had a notification that there was an update for this
add-on, but I got an error message when I attempted to install the
update. I don't remember what that said. I figured I'd find some sort
of update button if I went into add-ons manager and selected that
add-on from my list of installed add-ons, but I don't see one. Is
there a recently released update, and should I see that in my add-ons
manager?


Mary





---
Questa email è stata esaminata alla ricerca di virus da AVG.
http://www.avg.com




Re: Parenthesis

tonea.ctr.morrow@...
 

I had asked about parenthesis because someone had told me that the screen reader speaks capitalization differently than regular letters. For example, ALL CAPS IN A SENTENCE causes the reader to say those words with “emphasis” or to yell. I didn’t know there were punctuation settings. I just wondered if words in parenthesis were whispered or otherwise spoken differently.

 

Thanks!

 

Tonea