Date   

Re: CD ripping software that works well with NVDA

Rosemarie Chavarria
 

Yes. It rips CD's as well as burning them.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Arlene
Sent: Sunday, January 28, 2018 2:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CD ripping software that works well with NVDA

Hi, is Anyburn a free CD ripper?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Dang Manh Cuong
Sent: January-28-18 6:19 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CD ripping software that works well with NVDA

Hi
If those are audio cd, use anyburn: http://anyburn.com Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: vanphong@trungtamsaomai.org; congnghe@trungtamsaomai.org
Facebook: https://www.facebook.com/SaoMaiCenter
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org



Mobile / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@trungtamsaomai.org Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech


----- Original Message -----
From: "Steve Nomer" <swnomer@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 28, 2018 9:13 PM
Subject: [nvda] CD ripping software that works well with NVDA


Hi,


I have a large number of CDs that need to be ripped. Are there some
good rippers out there that work well with NVDA? Thanks for any suggestions.


Steve




Re: CD ripping software that works well with NVDA

Joe Paton
 

Roger,

If you don't have it yet, please drop me a line off list.
Joe@vi-ability.org.uk is the better address, it is less cluttered.


Re: CD ripping software that works well with NVDA

Arlene
 

Hi, is Anyburn a free CD ripper?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Dang Manh Cuong
Sent: January-28-18 6:19 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CD ripping software that works well with NVDA

Hi
If those are audio cd, use anyburn: http://anyburn.com Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: vanphong@trungtamsaomai.org; congnghe@trungtamsaomai.org
Facebook: https://www.facebook.com/SaoMaiCenter
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org



Mobile / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@trungtamsaomai.org Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech


----- Original Message -----
From: "Steve Nomer" <swnomer@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 28, 2018 9:13 PM
Subject: [nvda] CD ripping software that works well with NVDA


Hi,


I have a large number of CDs that need to be ripped. Are there some good
rippers out there that work well with NVDA? Thanks for any suggestions.


Steve




Re: CD ripping software that works well with NVDA

JM Casey <crystallogic@...>
 

I had this happen. I thought something was froozen. I did not realise I was in fact allowing all this crap to install on my computer.

However, a malwarebytes scan helped me get rid of all of it, and now I’m using newer CDEX with no problems. I wish the creators hadn’t done this though. It was not a very pleasant experience, to be sure.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: January 28, 2018 10:44 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CD ripping software that works well with NVDA

 

The current version of CDEX, as do so many free programs now, is bundled with other software you probably won't want and some of what you may get is questionable.  I don't know if Checky (spelling) will stop the installations.  Because of accessibility problems with the way the extra options are displayed, you likely won't see them during the installation and won't be able to refuse them yourself.  If you are going to use CDEX, either use an earlier version, if compatible with Windows 10, or wait to see if list members can furnish the current version without the exstra programs.  Or wait for news about Unchecky or, of course, you could get sighted assistance during the installlation.

 

Gene

----- Original Message -----

Sent: Sunday, January 28, 2018 8:37 AM

Subject: Re: [nvda] CD ripping software that works well with NVDA

 

Hello,

Exact audio copy and CDex are the two most popular and accessible.  I began
with CDex and liked it a lot when I still used windows for such things. 
Exact audio copy is the favourite of purists and audiofiles because out of
the box it has extremely strict error checking.  CDex can do this, but
needs to be set up for it and at that, it takes longer than EAC to rip with
strict settings.

Hope this helps,

Erik


On January 28, 2018 9:14:06 AM "Steve Nomer" <swnomer@...> wrote:

Hi,


I have a large number of CDs that need to be ripped. Are there some good
rippers out there that work well with NVDA? Thanks for any suggestions.


Steve








Re: Welcome to NVDA 2018: part 9 (add-ons) posted,completepackages for parts 6 and 7 (provisional)

mattias
 

NVDA as a windows store app?!

cool

 

Skickades från E-post för Windows 10

 

Från: Joseph Lee
Skickat: den 28 januari 2018 04:24
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Welcome to NVDA 2018: part 9 (add-ons) posted,completepackages for parts 6 and 7 (provisional)

 

Hi,

At the moment there are two planned: NVDA and Windows 10 on ARM, and NVDA as a Windows Store app. There won’t be demos, but they’ll include information people will need to know as they encounter NVDA in those situations. One of them ties into what’s coming in NVDA 2018.1, the other is from 2017.4.

 

Specifically:

  • NVDA and Windows 10 on ARM will talk about ARM processors, concept of emulation, why this development is important, and performance considerations.
  • NVDA as a Windows Store app will discuss how classic desktop apps are converted, advantages and limitations and so on.

 

Additional sections upon request… or maybe not. I’ll elaborate in February.

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of kavein thran
Sent: Saturday, January 27, 2018 7:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Welcome to NVDA 2018: part 9 (add-ons) posted, completepackages for parts 6 and 7 (provisional)

 

Hi Joseph, thanks for all the good works you’ve done. Really appreciate it so much.

 

What are the next addendums?

 

Sent from my iPhone


On 28 Jan 2018, at 7:59 AM, David Moore <jesusloves1966@...> wrote:

Hi Joseph!

Same goes with me. You will help so many, because I will recommend your tutorials on many Facebook groups, and so many people I know who are interested to have NVDA be at least their back-up screen reader.

I will really listen to all of this myself to prepare myself for certification.

Thank you for all of your time and effort to put these tutorials together in such a understandable way!

David Moore

Sent from Mail for Windows 10

 

From: matthew dyer
Sent: Saturday, January 27, 2018 4:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Welcome to NVDA 2018: part 9 (add-ons) posted, completepackages for parts 6 and 7 (provisional)

 

Hi,

 

Thank you so much for taking the time to put this together.  I am planning to get a hold of this and keep it around for anyone who might be interested.  I will give all of this a listen as I think It will give me a better understanding on how this all works and will help me in teaching others who might need help.

 

Thank you again,.

 

 



On Jan 27, 2018, at 1:46 PM, Joseph Lee <joseph.lee22590@...> wrote:

 

Ladies and gentlemen,

 

I’m delighted to announce the completion of component-based version of Welcome to NVDA 2018 tutorial set! I’ll explain what I just said in just a moment.

 

Before I go any further, I’d like to take a moment to thank everyone for your continued support and encouragement. The last six weeks have been a challenging yet fun period. In the midst of adjusting to new semester schedule (at Cal State Los Angeles), attending speech and debate competitions, going over add-ons and dealing with NVDA translation issues, I always looked forward to today’s milestone. There are a couple things to be done (including minor edits), but for all intents and purposes, you can now use the 2018 edition of my tutorial set as a handy reference and a teaching tool when training new NVDA users.

 

Today’s milestone means:

 

·         Component-based tutorial set: as promised last year, each segment are separate mp3 files. As of today, all nine sections in the main tutorial set are done. There might be changes in February once NVDA 2018.1 nears completion (if a message changes (especially in NVDA preferences, edits will be done).

·         Usage: as a free tutorial set, anyone is welcome to use the tutorial however they wish (including possible text transcriptions, converting them into a DAISY book, citing in other tutorials, etc.).

 

Speaking of sections: the ninth (and for now, final) section of welcome to NVDA 2018 is now available. This section has gone one of the most extensive edits, as it talks about NVDA add-ons. As always, the section (and components) can be found at www.josephsl.net/tutorials.

 

Also, complete packages for parts 6 and 7 (both concerning NVDA preferences) are now available:

 

·         Welcome to NVDA 2018 part 6A (preferences overview, general settings, synthesizer and supported synthesizers, voice settings and synth settings ring): http://www.josephsl.net/files/nvda18/6/nvda_tutorial_6a.mp3

·         Welcome to NVDA 2018 part 6B (braille settings and supported braille displays, keyboard settings, mouse settings, touch interaction, saving and restoring from saved settings): http://www.josephsl.net/files/nvda18/6/nvda_tutorial_6b.mp3

·         Welcome to NVDA 2018 part 7A (review cursor, input composition settings, object presentation, browse mode): http://www.josephsl.net/files/nvda18/7/nvda_tutorial_7a.mp3

·         Welcome to NVDA 2018 part 7B (document formatting, Windows 10 OCR, speech dictionaries, punctuation/symbol pronunciation, input gestures, restoring to factory defaults): http://www.josephsl.net/files/nvda18/7/nvda_tutorial_7b.mp3

 

Note that complete packages for parts 8 and 9 aren’t up yet. They will go up along with addenda soon. Once features for NVDA 2018.1 are frozen (early February), a zip file containing complete packages, addenda, and an overall introduction and changelog (part 0) will be posted, marking the end of this project. This also means the 2015 edition will be removed from the website. Stay tuned as I’ll also be making an announcement regarding this tutorial set and others.

 

Now for the fun part:

 

Changelog for part 9 (NVDA add-ons) from 2015:

 

·         Completely redone.

·         In add-ons manager segment, added steps on how to enable or disable individual add-ons.

·         Features new and updated add-ons (some prominent, others subtle): GoldWave (updated and used to demonstrate disabling individual add-ons), Systray List (updated), Resource Monitor (updated), DictationBridge (new), Golden Cursor (new), Remote Support (new), Windows 10 App Essentials (new), SentenceNav (new and used during introduction to community add-ons website).

·         GoldWave: the effects of disabling and enabling individual add-ons are demonstrated.

·         SentenceNav: brief demonstration while reading add-ons website content.

·         Systray List: no major changes except for user interface.

·         Resource Monitor: added coverage of system uptime (NVDA+Shift+7) and clarified Windows 10 release announcements for Windows version information (NVDA+Shift+6).

·         Remote Support: basics, including controlling remote computer, muting remote speech, sending clipboard data and add-on options are covered (did not cover remote braille and secure screen considerations due to time constraints).

·         Golden Cursor: covers mouse manipulation via keyboard, mouse arrows, jumping to, saving, and viewing saved mouse positions, changing mouse movement unit, toggling mouse movement restrictions, add-on options.

·         DictationBridge: basic dictation, clicking controls, key presses, installing NVDA commands for Windows Speech Recognition, performing NVDA commands via voice.

·         Windows 10 App Essentials: updating add-on, emoji panel, Skype universal app.

·         Final remarks: links to NVDA users list, GitHub, and NV Access websites are provided, along with information on NVDACon.

·         It will take almost two hours to traverse all segments.

 

Last minute changes on other sections:

·         Part 1 (introduction) has seen file renames to better reflect file content.

·         Tutorial version is now 2018.1 with 2017.4 features included.

·         Introduction for part 6 (NVDA Preferences I) has been updated to say that first half of preferences will cover touch interaction.

 

Overall tutorial set statistics:

·         Total duration: slightly more than 13 hours (minus upcoming addenda).

·         Average duration per section: almost 90 minutes.

·         Average segment duration: 7 minutes.

·         Shortest section: part 1 (Introduction).

·         Longest section: part 4 (NVDA and the web).

·         Longest thematic section: NVDA preferences (parts 6 and 7, which combined runs for over three hours).

 

Up next:

·         Complete packages for parts 8 and 9 will be published, with part 9 divided into two parts. These will go up next week.

·         Addenda: two addendum recordings are planned and will go up soon.

·         The “real” complete package (a zip file) along with part 0 (changelog) will be published once NVDA 2018.1 feature set is frozen in February (for resident translators, this means shortly after start of translatable string freeze).

·         The 2015 edition of Welcome to NVDA will be removed.

 

Thank you and enjoy the tutorial set.

Cheers,

Joseph

 

 

 


Re: code factory Eloquence for NVDA

特種兵
 


  yes, but does the eloquence the same with vocalizer?

thank you for much
Logo Kuo from Taiwan
Edhoari Setiyoso 於 2018/1/28 下午 11:00 寫道:

Yes, You may check this link for a demo
http://www.nuance.com/landing-pages/playground/Vocalizer_Demo2/vocaLizer_modal.html?demo=true

Edhoari Setiyoso
On 01/28/2018 09:11 PM, 特種兵 wrote:

  Does the sapi5 eloquence support Chinese or mandarin?
  thanks

thank you for much
Logo Kuo from Taiwan
Josh Kennedy 於 2018/1/28 下午 09:22 寫道:
In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good. 




Re: CD ripping software that works well with NVDA

Rosemarie Chavarria
 

Hi, Steve,

I use windows media player for ripping CD's and it works great for me.

Rosemarie

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Steve Nomer
Sent: Sunday, January 28, 2018 6:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] CD ripping software that works well with NVDA

Hi,


I have a large number of CDs that need to be ripped. Are there some good rippers out there that work well with NVDA? Thanks for any suggestions.


Steve


Re: NVDA and Amazon

ely.r@...
 

Just wanted to correct my own post re the Amazon standard site. I am still using FF 52esr not 7.

Dr. Rick Ely
TVI, Vision Consultant
451 Rocky Hill Road
Florence, MA 01062
&413() 727-3038

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account via Groups.Io
Sent: Sunday, January 28, 2018 4:21 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Amazon

Yes customer reviews seem to now be what I can only describe as tonka toy interfaced. What they have done is dumbed it down but in the process made it very hard as it repeats itself all the time whereas before you had simple links forward and back etc. However not sure i trust customer reviews myself.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: <ely.r@comcast.net>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 27, 2018 8:02 PM
Subject: Re: [nvda] NVDA and Amazon


I would second that experience with the standard Amazon site. They messed
about with customer reviews that make them more cumbersome to use, but have
no issues. Running Windows 10 and have stayed with Firefox 57 but will
likely move to 58 this weekend.


Dr. Rick Ely
TVI, Vision Consultant
451 Rocky Hill Road
Florence, MA 01062
&413() 727-3038

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Ron
Canazzi
Sent: Saturday, January 27, 2018 2:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Amazon

I use Amazon all the time with NVDA 2017.4 and have no real problems. I
experience nothing like what you are describing. I am using Windows 10,
Firefox 58 with standard settings.



On 1/27/2018 11:42 AM, Ron Edwards via Groups.Io wrote:
Hi all.


Do Any of you kind people use the above? I can't even sign in. There
is a sign in button but when I press Return the space bar as I usually
would, nothing happends.


Any help appreciated.


Ron




--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: CD ripping software that works well with NVDA

Roger Stewart
 

Can someone please give me a direct download link for Exact Audio Copy?  I tried Googling it, and I get a download page and when I choose download, it goes to another page with another download link and when I choose that, I'm sent to yet another page and I have gone through about a dozen such page transfers and have yet to actually get the danged program! Hope someone can help.

Thanks.

Roger

On 1/28/2018 8:37 AM, erik burggraaf wrote:
Hello,

Exact audio copy and CDex are the two most popular and accessible.  I began with CDex and liked it a lot when I still used windows for such things.  Exact audio copy is the favourite of purists and audiofiles because out of the box it has extremely strict error checking.  CDex can do this, but needs to be set up for it and at that, it takes longer than EAC to rip with strict settings.

Hope this helps,

Erik


On January 28, 2018 9:14:06 AM "Steve Nomer" <swnomer@gmail.com> wrote:

Hi,


I have a large number of CDs that need to be ripped. Are there some good
rippers out there that work well with NVDA? Thanks for any suggestions.


Steve









Re: CD ripping software that works well with NVDA

Gene
 

The current version of CDEX, as do so many free programs now, is bundled with other software you probably won't want and some of what you may get is questionable.  I don't know if Checky (spelling) will stop the installations.  Because of accessibility problems with the way the extra options are displayed, you likely won't see them during the installation and won't be able to refuse them yourself.  If you are going to use CDEX, either use an earlier version, if compatible with Windows 10, or wait to see if list members can furnish the current version without the exstra programs.  Or wait for news about Unchecky or, of course, you could get sighted assistance during the installlation.
 
Gene

----- Original Message -----
Sent: Sunday, January 28, 2018 8:37 AM
Subject: Re: [nvda] CD ripping software that works well with NVDA

Hello,

Exact audio copy and CDex are the two most popular and accessible.  I began
with CDex and liked it a lot when I still used windows for such things. 
Exact audio copy is the favourite of purists and audiofiles because out of
the box it has extremely strict error checking.  CDex can do this, but
needs to be set up for it and at that, it takes longer than EAC to rip with
strict settings.

Hope this helps,

Erik


On January 28, 2018 9:14:06 AM "Steve Nomer" <swnomer@...> wrote:

Hi,


I have a large number of CDs that need to be ripped. Are there some good
rippers out there that work well with NVDA? Thanks for any suggestions.


Steve









Re: code factory Eloquence for NVDA

Edhoari Setiyoso
 

Yes, You may check this link for a demo
http://www.nuance.com/landing-pages/playground/Vocalizer_Demo2/vocaLizer_modal.html?demo=true

Edhoari Setiyoso
On 01/28/2018 09:11 PM, 特種兵 wrote:


  Does the sapi5 eloquence support Chinese or mandarin?
  thanks

thank you for much
Logo Kuo from Taiwan
Josh Kennedy 於 2018/1/28 下午 09:22 寫道:
In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good. 



Re: code factory Eloquence for NVDA

Edhoari Setiyoso
 

Yes, you may install it on up to three PC
Just remember that you need to unregister on a PC/Laptop when you need to reinstall OS on it.

Edhoari Setiyoso

On 01/28/2018 08:33 PM, Ann Byrne wrote:
Can you use it on more than one computer???
At 07:22 AM 1/28/2018, you wrote:
In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good.


Re: CD ripping software that works well with NVDA

erik burggraaf <erik@...>
 

Hello,

Exact audio copy and CDex are the two most popular and accessible. I began with CDex and liked it a lot when I still used windows for such things. Exact audio copy is the favourite of purists and audiofiles because out of the box it has extremely strict error checking. CDex can do this, but needs to be set up for it and at that, it takes longer than EAC to rip with strict settings.

Hope this helps,

Erik

On January 28, 2018 9:14:06 AM "Steve Nomer" <swnomer@gmail.com> wrote:

Hi,


I have a large number of CDs that need to be ripped. Are there some good
rippers out there that work well with NVDA? Thanks for any suggestions.


Steve


Re: CD ripping software that works well with NVDA

 

Hi
If those are audio cd, use anyburn: http://anyburn.com
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: vanphong@trungtamsaomai.org; congnghe@trungtamsaomai.org
Facebook: https://www.facebook.com/SaoMaiCenter
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org



Mobile / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@trungtamsaomai.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech

----- Original Message -----
From: "Steve Nomer" <swnomer@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 28, 2018 9:13 PM
Subject: [nvda] CD ripping software that works well with NVDA


Hi,


I have a large number of CDs that need to be ripped. Are there some good rippers out there that work well with NVDA? Thanks for any suggestions.


Steve



CD ripping software that works well with NVDA

Steve Nomer
 

Hi,


I have a large number of CDs that need to be ripped. Are there some good rippers out there that work well with NVDA? Thanks for any suggestions.


Steve


Re: code factory Eloquence for NVDA

特種兵
 


  Does the sapi5 eloquence support Chinese or mandarin?
  thanks

thank you for much
Logo Kuo from Taiwan
Josh Kennedy 於 2018/1/28 下午 09:22 寫道:

In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good. 


Re: code factory Eloquence for NVDA

Ann Byrne
 

Can you use it on more than one computer???

At 07:22 AM 1/28/2018, you wrote:
In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good.


Re: code factory Eloquence for NVDA

bob jutzi <jutzi1@...>
 

Found it. Thanks.

On 1/28/2018 8:22 AM, Josh Kennedy wrote:
In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good.


Re: code factory Eloquence for NVDA

Josh Kennedy <joshknnd1982@...>
 

In your start menu there is an eloquence settings dialog that lets you change voice and stuff. I bought the sapi5 eloquence from atguys and it works very good. 


Re: NVDA and Amazon

Brian's Mail list account <bglists@...>
 

Yes its the same bit on the end for the uk site, but to be honest its not a lot different and one often ends up back on the main site to find stuff.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Kevin Cussick via Groups.Io" <the.big.white.shepherd=googlemail.com@groups.io>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 27, 2018 9:52 PM
Subject: Re: [nvda] NVDA and Amazon


is there an access page for the UK?

On 27/01/2018 17:18, Rosemarie Chavarria wrote:
I've always tried the access site and had good luck with it.




On 1/27/2018 9:15 AM, Sarah k Alawami wrote:
Try amazon.com/access <http://amazon.com/access> you will have better luck there.

hope that helps a bit.

On Jan 27, 2018, at 8:48 AM, Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io <mailto:bglists=blueyonder.co.uk@groups.io>> wrote:

I was just on it a moment ago with firefox 52esr and found no problems adding an item to my basket after logging in. This is the uk site.
Brian

bglists@blueyonder.co.uk <mailto:bglists@blueyonder.co.uk>
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk <mailto:briang1@blueyonder.co.uk>, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Ron Edwards via Groups.Io" <facup1927=virginmedia.com@groups.io <mailto:facup1927=virginmedia.com@groups.io>>
To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>>
Sent: Saturday, January 27, 2018 4:42 PM
Subject: [nvda] NVDA and Amazon


Hi all.


Do Any of you kind people use the above? I can't even sign in. There is a sign in button but when I press Return the space bar as I usually would, nothing happends.


Any help appreciated.


Ron