Date   

Re: very good news about audio conversion soft ware

Gene
 

It's hard to know what the problem is.  It may be that there is some minor problem that causes something to be placed incorrectly in messages now and then.  But what the problem may be or what the cause is, I have no idea. 
 
At first, I thought it was an encoding problem but I don't think the space symbol or whatever indicates a space has encoding conflicts.  I suspect that something incorrect is being placed in messages now and then for some unknown reason. 
Gene

Sent: Thursday, May 05, 2016 5:36 PM
Subject: Re: [nvda] very good news about audio conversion soft ware

Hi, David,


This message is much better.


Rosemarie




On 5/5/2016 12:05 AM, David Moore wrote:
Hi guys,
David Moore here. This is strange that my messages sound like there is some symbol in them, because I am using Windows Live Mail on a laptop with win10. How does this message sound?
 
 
Sent: Wednesday, May 4, 2016 8:11 PM
Subject: Re: [nvda] very good news about audio conversion soft ware
 

Hi Gene,

 

When replying, the issue does not exist.  I don't see any odd characters in the place of spaces.  I am sure it is something to do with just how Thunderbird is rendering his original messages.  I have seen this a few times with some individuals located in foreign countries, so maybe it could be something to do with a font type.

 


On 5/4/2016 3:15 PM, Gene wrote:
I should alter what I said.  I should say that, in reading the messages quoted under yours, I didn't have any problems reading the first two or three.  I didn't read further.  According to Ron's message, others appear to have problems reading one of these messages in their original form.  Unless the problem is solved, what happens if you issue the reply command and try to read the message?

Gene
----- Original Message -----

From: Ron Canazzi
Sent: Wednesday, May 04, 2016 12:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware


Hi Rosemarie,

I hear that oddity with his messages too.  What is happening is that the spaces between words are some sort of unrecognizable character--unrecognizable to screen readers and certain synthesizers I would guess.  I think it may be because he is sending his messages from an IPhone or other IOS device.  It is interpreting his spaces between words as some sort of character.


On 5/4/2016 12:58 PM, Rosemarie Chavarria wrote:

  Hi, David,


  This message sounds so strange--like it's in a foreign language.


  Rosemarie




  On 5/4/2016 2:18 AM, David Moore wrote:

    There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


    -----Original Message----- From: Ben J. Bloomgren
    Sent: Wednesday, May 4, 2016 3:23 AM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] very good news about audio conversion soft ware

    How do you issue that command? Do you put it after the extension or before it?

    Ben


      On May 4, 2016, at 00:16, Shaun Everiss mailto:sm.everiss@... wrote:

      freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.




        On 4/05/2016 5:55 p.m., David Moore wrote:
        Hi,
        If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
        www.freemake.com/free_video_converter 1.. Cached
         2.. Similar

        Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
        Also, There is a website where you can upload your file and have it converted into many different formats:
        www.convertfiles.com
        There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

        From: Bobby
        Sent: Tuesday, May 3, 2016 9:25 PM
        To: nvda@nvda.groups.io
        Subject: Re: [nvda] very good news about audio conversion soft ware

        no I don't mean rip I mean converting audio that I record or down load from the internet.  I don't know whare or how to add files to convert.




        On 5/3/2016 9:04 PM, Robert Mendoza wrote:

         Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


        Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

           Well I just learned some thing new.  I never you could convert audio windows media player I only new you can rip with it.  Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


           On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

             Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what  it can or can't do,  I thought it was mainly for buying music from apple.

             -- Patrick
             Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

               Goodness gracious, yall!  Why not just use ITunes to rip for crying out
               loud!  Is it mainly because ITunes doesn't support the formats you all
               wanna rip into?  If so, then OK, point taken, but otherwise... really?
               ---
               Christopher Gilland




















--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: very good news about audio conversion soft ware

Rosemarie Chavarria
 

Hi, David,


This message is much better.


Rosemarie




On 5/5/2016 12:05 AM, David Moore wrote:
Hi guys,
David Moore here. This is strange that my messages sound like there is some symbol in them, because I am using Windows Live Mail on a laptop with win10. How does this message sound?
 
 
Sent: Wednesday, May 4, 2016 8:11 PM
Subject: Re: [nvda] very good news about audio conversion soft ware
 

Hi Gene,

 

When replying, the issue does not exist.  I don't see any odd characters in the place of spaces.  I am sure it is something to do with just how Thunderbird is rendering his original messages.  I have seen this a few times with some individuals located in foreign countries, so maybe it could be something to do with a font type.

 


On 5/4/2016 3:15 PM, Gene wrote:
I should alter what I said.  I should say that, in reading the messages quoted under yours, I didn't have any problems reading the first two or three.  I didn't read further.  According to Ron's message, others appear to have problems reading one of these messages in their original form.  Unless the problem is solved, what happens if you issue the reply command and try to read the message?

Gene
----- Original Message -----

From: Ron Canazzi
Sent: Wednesday, May 04, 2016 12:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware


Hi Rosemarie,

I hear that oddity with his messages too.  What is happening is that the spaces between words are some sort of unrecognizable character--unrecognizable to screen readers and certain synthesizers I would guess.  I think it may be because he is sending his messages from an IPhone or other IOS device.  It is interpreting his spaces between words as some sort of character.


On 5/4/2016 12:58 PM, Rosemarie Chavarria wrote:

  Hi, David,


  This message sounds so strange--like it's in a foreign language.


  Rosemarie




  On 5/4/2016 2:18 AM, David Moore wrote:

    There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


    -----Original Message----- From: Ben J. Bloomgren
    Sent: Wednesday, May 4, 2016 3:23 AM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] very good news about audio conversion soft ware

    How do you issue that command? Do you put it after the extension or before it?

    Ben


      On May 4, 2016, at 00:16, Shaun Everiss mailto:sm.everiss@... wrote:

      freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.




        On 4/05/2016 5:55 p.m., David Moore wrote:
        Hi,
        If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
        www.freemake.com/free_video_converter 1.. Cached
         2.. Similar

        Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
        Also, There is a website where you can upload your file and have it converted into many different formats:
        www.convertfiles.com
        There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

        From: Bobby
        Sent: Tuesday, May 3, 2016 9:25 PM
        To: nvda@nvda.groups.io
        Subject: Re: [nvda] very good news about audio conversion soft ware

        no I don't mean rip I mean converting audio that I record or down load from the internet.  I don't know whare or how to add files to convert.




        On 5/3/2016 9:04 PM, Robert Mendoza wrote:

         Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


        Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

           Well I just learned some thing new.  I never you could convert audio windows media player I only new you can rip with it.  Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


           On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

             Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what  it can or can't do,  I thought it was mainly for buying music from apple.

             -- Patrick
             Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

               Goodness gracious, yall!  Why not just use ITunes to rip for crying out
               loud!  Is it mainly because ITunes doesn't support the formats you all
               wanna rip into?  If so, then OK, point taken, but otherwise... really?
               ---
               Christopher Gilland




















--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: very good news about audio conversion soft ware

Pete <emac00@...>
 

Hey now!
Just get the cdfs.dll and pop it in to system32
and you can copy wave files rite from the CD using explorer.
nvda works fine with that.
Except there are no titles just track numbers.
Pete


Re: NVDA still freezing, don't know what the deal is

Pete <emac00@...>
 

The error that sticks out for me is:
WindowsError: [Error 1775] A null context handle was passed from the
client to the host during a remote procedure call

before you tare up your computer looking for hardware reasons check the visual c++ / number instalations
I don't know how to repair them, since removeing and reinstalling doesn't seem to fix it.

On 5/2/2016 5:30 PM, Kenny Peyattt jr. wrote:
Hi if you want i can forward the log you sent over to the nvda developers li9st.
Kenny Peyatt jr.

On 5/2/2016 3:15 PM, Sharni-Lee Ward wrote:
I forgot to mention that last log was made in the old snapshot I have,
not the official installation. But I would still like a translation of
those errors from someone who understands them better than I do.


On 3/05/2016 2:17 AM, Sharni-Lee Ward wrote:
It just happened AGAIN. This time, with no Braille Display plugged in,
but still in Word. My sister described what she saw as "It's circling
and the screen is foggy," so I'm assuming it was hanging. It took longer
than normal to shut down, and longer than normal to start up properly,
and apparently Windows Explorer lagged for a few seconds. I don't know
how to recover my writing (I tried one of the previous times this
happened by restoring the auto recovery file from the Recycle bin but it
didn't work...).


Anyways, here's the log. I hope this time I can get an answer for why
this is happening. I'm getting seriously concerned at this point.


INFO - __main__ (00:26:15):
Starting NVDA
INFO - core.main (00:26:19):
Config dir: C:\Users\pc\AppData\Roaming\nvda
INFO - core.main (00:26:20):
NVDA version brltbl20160315
INFO - core.main (00:26:20):
Using Windows version 6.1.7601 service pack 1 workstation
INFO - core.main (00:26:20):
Using Python version 2.7.11 (v2.7.11:6d1b6a68f775, Dec 5 2015,
20:32:19) [MSC v.1500 32 bit (Intel)]
INFO - core.main (00:26:20):
Using comtypes version 0.6.2
INFO - external:synthDrivers.ptenglish.SynthDriver.__init__ (00:26:24):
Using eSpeak version 1.48.03 04.Mar.14
INFO - synthDriverHandler.setSynth (00:26:24):
Loaded synthDriver ptenglish
INFO - core.main (00:26:24):
Using wx version 3.0.2.0 msw (classic)
INFO - braille.initialize (00:26:24):
Using liblouis version 2.6.5
INFO - braille.BrailleHandler.setDisplayByName (00:26:24):
Loaded braille display driver noBraille, current display has 0 cells.
INFO - brailleInput.initialize (00:26:24):
Braille input initialized
INFO - core.main (00:26:25):
NVDA initialized
INFO - braille.BrailleHandler.setDisplayByName (00:27:25):
Loaded braille display driver freedomScientific, current display has 40
cells.
ERROR - queueHandler.flushQueue (00:33:30):
Error in func _handleUpdate from eventQueue
Traceback (most recent call last):
File "queueHandler.pyc", line 50, in flushQueue
File "virtualBuffers\__init__.pyc", line 674, in _handleUpdate
File "braille.pyc", line 1645, in handleUpdate
File "braille.pyc", line 906, in update
File "textInfos\offsets.pyc", line 346, in expand
File "virtualBuffers\__init__.pyc", line 314, in _getUnitOffsets
File "textInfos\offsets.pyc", line 328, in _getUnitOffsets
File "virtualBuffers\__init__.pyc", line 256, in _getParagraphOffsets
WindowsError: [Error 1775] A null context handle was passed from the
client to the host during a remote procedure call


On 3/05/2016 12:15 AM, Sharni-Lee Ward wrote:
Just tried another thing that consistently got NVDA to hang recently,
namely, opening the sounds manager in Control Panel and then arrowing to
the Sound Scheme tab. I thought it only did this because of the Braille
Display but I wanted to test it to make sure. This time, once the window
was closed, NVDA started responding again. I also tried to activate
Narrator but it didn't work, though as I said, that didn't end up
mattering. Here's the log for that session, though I warn you, the
warning repeats itself several times. In case each warning was subtly
different, I copied the whole thing. Don't worry about the Braille error
that shows up first—that's about me starting up the computer and by
extension NVDA without my display plugged in and then saving the
configuration with default as No Braille.


INFO - __main__ (18:51:56):
Starting NVDA
INFO - core.main (18:51:59):
Config dir: C:\Users\pc\AppData\Roaming\nvda
INFO - core.main (18:52:00):
NVDA version 2016.1
INFO - core.main (18:52:00):
Using Windows version 6.1.7601 service pack 1 workstation
INFO - core.main (18:52:00):
Using Python version 2.7.11 (v2.7.11:6d1b6a68f775, Dec 5 2015,
20:32:19) [MSC v.1500 32 bit (Intel)]
INFO - core.main (18:52:00):
Using comtypes version 0.6.2
INFO - external:synthDrivers.ptenglish.SynthDriver.__init__ (18:52:10):
Using eSpeak version 1.48.03 04.Mar.14
INFO - synthDriverHandler.setSynth (18:52:11):
Loaded synthDriver ptenglish
INFO - core.main (18:52:11):
Using wx version 3.0.2.0 msw (classic)
INFO - braille.initialize (18:52:11):
Using liblouis version 2.6.5
ERROR - braille.BrailleHandler.setDisplayByName (18:52:11):
Error initializing display driver
Traceback (most recent call last):
File "braille.pyo", line 1447, in setDisplayByName
File "brailleDisplayDrivers\freedomScientific.pyo", line 179, in __init__
RuntimeError: No display found
INFO - braille.BrailleHandler.setDisplayByName (18:52:11):
Loaded braille display driver noBraille, current display has 0 cells.
INFO - brailleInput.initialize (18:52:11):
Braille input initialized
INFO - core.main (18:52:12):
NVDA initialized
INFO - braille.BrailleHandler.setDisplayByName (19:30:34):
Loaded braille display driver noBraille, current display has 0 cells.
INFO - config.ConfigManager.save (19:30:39):
Base configuration saved
WARNING - watchdog._watcher (23:47:35):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:47:50):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:48:05):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:48:20):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:48:35):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:48:50):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:49:05):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

WARNING - watchdog._watcher (23:49:20):
Core frozen in stack:
File "nvda.pyw", line 190, in <module>
File "core.pyo", line 382, in main
File "wx\_core.pyo", line 8657, in MainLoop
File "wx\_core.pyo", line 7952, in MainLoop
File "core.pyo", line 353, in Notify
File "queueHandler.pyo", line 83, in pumpAll
File "queueHandler.pyo", line 50, in flushQueue
File "eventHandler.pyo", line 61, in _queueEventCallback
File "eventHandler.pyo", line 138, in executeEvent
File "eventHandler.pyo", line 162, in doPreGainFocus
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\__init__.pyo", line 868, in event_foreground
File "speech.pyo", line 107, in cancelSpeech
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\__init__.py",
line 117, in cancel
File
"C:\Users\pc\AppData\Roaming\nvda\addons\protalker\synthDrivers\ptenglish\_espeak.py",
line 224, in stop
File "nvwave.pyo", line 244, in stop
File "threading.pyo", line 174, in acquire

INFO - core.onEndSession (23:54:04):
Windows session ending


On 2/05/2016 7:29 PM, Sharni-Lee Ward wrote:
If the master snapshots fixed it, does this mean the next release (which
is hopefully coming sometime this month or next) will have the fix?
Because if so, I can just change the configuration so I have to connect
it manually when I want to use it, which isn't a problem as I usually
have to re-activate the Braille settings if I have to disconnect the
display for one reason or another, or if the computer's put to sleep. If
the fix is implemented next release, I'll adjust the configuration
again. If it does happen again despite this measure, I will try Gene's
method, although I suspect it will be fine. Thank you everyone for all
your help and tips, and at least I know how to retrieve old log messages
now! :D


On 2/05/2016 7:02 PM, Brian's Mail list account wrote:
I don't think its malware, reading the thread it sounds like the
braill table part of nvda and the master snapshots are supposed to
have now fixed it. Its been a while since I had a computer with one of
those displays. fartoo expensive for the low usage I have.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, May 02, 2016 4:15 AM
Subject: Re: [nvda] NVDA still freezing, don't know what the deal is


Hi there: Do you think your computer could have mellwhere to cause this
freezing?

-----Original Message-----
From: Rob [mailto:captinlogic@gmail.com]
Sent: May-01-16 6:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA still freezing, don't know what the deal is

Gene <gsasner@ripco.com> wrote:
Why wouldn't my workaround accomplish the same end but more easily.
Because most of the keyboard is frozen when this freeze happens. The
only
thing that works is the windows key and some function keys.









address books in thunderbird

 

Hi all
thanks to whoever it was that gave me the shortcut to edit the book.
I have removed all the addresses in my book I have no use for and that is good.


Re: 2 things

Laz
 

It only seems to move by line, not by paragraph on my system.

Laz

On 5/5/16, HBotma <ehlbotma@gmail.com> wrote:
Hello

If you press Ctrl and the Down Arrow or Ctrl and the up arrow, NVDA
moves by paragraph. I am not sure about the place markers though.

Most of the navigation keys you used in MS Office with JAWS are the
same in NVDA.

Regards

Heaven

On 5/4/16, Tony James <megatronjames@gmail.com> wrote:
Hi, I was just wondering two things. First, is it possible to move by
large chunks of text like paragraphs with nvda? Second, is it possible
to
insert place markers into documents like you can with Jaws? Thx

Tony JAmes, untouched and alive!




--
Affordably priced Accessible Talking MP3 Players, Accessible phones,
Bluetooth devices, and accessories
http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Skype: lazmesa
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


Re: NVDA and OCR add-on

Cearbhall O'Meadhra
 

Thanks, Brandon,

 

Your explanation is very clear and very useful.

 

I had a go at this procedure as you describe it with little success. I suppose it has limited application then.

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brandon Cross
Sent: Thursday, May 5, 2016 3:49 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and OCR add-on

 

Hi, you should do the following:

1. Maximize the window to give the OCR engine the best chance of capturing the text
2. Use Object Nav to focus on the area where the text should be
3. Press NVDA Shift R to perform the OCR
4. use numpad 7 and 9 to read up and down lines respectively

This is not an ideal way to read PDF's. If the document has not been marked up accessibly, I am not sure what to tell you, in these cases, I have had little success. I see this more of a tool to read a screen, or part of a screen that is not accessible, or, for retrieving text in an image. There are other software solutions out there for converting PDF's into complete documents with OCR performed on them.

On 5/5/2016 9:19 AM, Cearbhall O'Meadhra wrote:

Hi,

 

I have just installed the OCR add-on in NVDA 2016.1 on Windows 10. I tried to read an image PDF file without success. How can I find full instructions on how to use this add-on?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

 


Re: NVDA and OCR add-on

Jacob Kruger
 

I don't use it all that often, and, for something like a .pdf file, with scanned pages, I would generally use pdf2txt to handle whole file, but, with add-on installed - unless I have an old version, or something, NVDA + R, then when it tells me done, switch to screen review mode, and use numpad keys to read lines, words, etc.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

On 2016-05-05 3:19 PM, Cearbhall O'Meadhra wrote:
Hi,

I have just installed the OCR add-on in NVDA 2016.1 on Windows 10. I
tried to read an image PDF file without success. How can I find full
instructions on how to use this add-on?

All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@blbc.ie


Re: NVDA and OCR add-on

Gene
 

Sorry, I replied to the wrong message.
 
Gene

------ Original Message -----
From: Gene
Sent: Thursday, May 05, 2016 9:53 AM
Subject: Re: [nvda] NVDA and OCR add-on

how do you open Internet Explorer?  If you are going to be searching using it directly now, you may want to make a short cut key command such as control alt I to open it.  Or you may want to put the Google home page on your desktop so you can just press enter on it and have Google open in Internet Explorer.  I'm not sure of the procedure to place a web page adddress on the desktop as a short cut.
 
Gene
----- Original Message ------
Sent: Thursday, May 05, 2016 9:48 AM
Subject: Re: [nvda] NVDA and OCR add-on

Hi, you should do the following:

1. Maximize the window to give the OCR engine the best chance of capturing the text
2. Use Object Nav to focus on the area where the text should be
3. Press NVDA Shift R to perform the OCR
4. use numpad 7 and 9 to read up and down lines respectively

This is not an ideal way to read PDF's. If the document has not been marked up accessibly, I am not sure what to tell you, in these cases, I have had little success. I see this more of a tool to read a screen, or part of a screen that is not accessible, or, for retrieving text in an image. There are other software solutions out there for converting PDF's into complete documents with OCR performed on them.

On 5/5/2016 9:19 AM, Cearbhall O'Meadhra wrote:

Hi,

 

I have just installed the OCR add-on in NVDA 2016.1 on Windows 10. I tried to read an image PDF file without success. How can I find full instructions on how to use this add-on?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 



Re: NVDA and OCR add-on

Gene
 

how do you open Internet Explorer?  If you are going to be searching using it directly now, you may want to make a short cut key command such as control alt I to open it.  Or you may want to put the Google home page on your desktop so you can just press enter on it and have Google open in Internet Explorer.  I'm not sure of the procedure to place a web page adddress on the desktop as a short cut.
 
Gene

----- Original Message ------
Sent: Thursday, May 05, 2016 9:48 AM
Subject: Re: [nvda] NVDA and OCR add-on

Hi, you should do the following:

1. Maximize the window to give the OCR engine the best chance of capturing the text
2. Use Object Nav to focus on the area where the text should be
3. Press NVDA Shift R to perform the OCR
4. use numpad 7 and 9 to read up and down lines respectively

This is not an ideal way to read PDF's. If the document has not been marked up accessibly, I am not sure what to tell you, in these cases, I have had little success. I see this more of a tool to read a screen, or part of a screen that is not accessible, or, for retrieving text in an image. There are other software solutions out there for converting PDF's into complete documents with OCR performed on them.

On 5/5/2016 9:19 AM, Cearbhall O'Meadhra wrote:

Hi,

 

I have just installed the OCR add-on in NVDA 2016.1 on Windows 10. I tried to read an image PDF file without success. How can I find full instructions on how to use this add-on?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 



Re: NVDA and OCR add-on

Brandon Cross <bcross3286@...>
 

Hi, you should do the following:

1. Maximize the window to give the OCR engine the best chance of capturing the text
2. Use Object Nav to focus on the area where the text should be
3. Press NVDA Shift R to perform the OCR
4. use numpad 7 and 9 to read up and down lines respectively

This is not an ideal way to read PDF's. If the document has not been marked up accessibly, I am not sure what to tell you, in these cases, I have had little success. I see this more of a tool to read a screen, or part of a screen that is not accessible, or, for retrieving text in an image. There are other software solutions out there for converting PDF's into complete documents with OCR performed on them.

On 5/5/2016 9:19 AM, Cearbhall O'Meadhra wrote:

Hi,

 

I have just installed the OCR add-on in NVDA 2016.1 on Windows 10. I tried to read an image PDF file without success. How can I find full instructions on how to use this add-on?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 



Re: NVDA and OCR add-on

Cearbhall O'Meadhra
 

Hi,

 

I have just installed the OCR add-on in NVDA 2016.1 on Windows 10. I tried to read an image PDF file without success. How can I find full instructions on how to use this add-on?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


Re: NVDA Con

Bhavya shah
 

Hi Nutt,
Great idea and efforts. If there is sufficient interest in an NVDACon
for Thailand, do go ahead with that idea, and in case that doesn't
quite work out and an Asian one seems more promising, please feel free
to write to me offlist about collaborating on a current research study
we are conducting.
Thanks.

On 5/5/16, Supanut Leepaisomboon <supanut2000@outlook.com> wrote:
Hi,

First, I would like to say thank you very much to everyone who helped
organize the NVDA Con 2016. Though I was unable to participate in all
sessions due to classes and other matters, I still enjoy participating
nonetheless, in all sessions that I was able to participate in. NVDA Con, in
my opinion, is not just a chance for NVDA users and developers to meet, but
it is also an opportunity to get to know each other amongst NVDA users from
around the world.

To be honest, right after the conference, or rather during the conference, I
have an idea in mind. If NVDA Con International was able to be successfully
organized, I should be able to try to organize a NVDA Con Thailand, or even
better, NVDA Con Asean. But I'll most likely start with NVDA Con Thailand.

The first step, of course, is to conduct a feasibility study, mainly finding
out how many NVDA users are there in Thailand. If the study reveals that
there are enough NVDA users in Thailand to make a NVDA Con worthwhile, then
comes the big part, planning and organizing the conference itself. As it is
mainly for Thailand, there is a choice between physical venues and Teamtalk,
each with its own advantages and disadvantages. Perhaps even a NVDA workshop
for Thais who are not familiar with NVDA is possible as one of the programs
in the conference, if a feasibility study reveals that it is worthwhile
organizing.
--
Warm Regards
Bhavya Shah
Using NVDA (Non Visual Desktop Access) free and open source screen
reader for Microsoft Windows
To download a copy of the free screen reader NVDA, please visit
http://www.nvaccess.org/
Using Google Talkback on Motorolla G second generation Lollipop 5.0.2
Reach me through the following means:
Mobile: +91 7506221750
E-mail id: bhavya.shah125@gmail.com
Skype id : bhavya.09


Re: NVDA GENERAL,

Jacob Kruger
 

With some versions of windows, it's possible to change the keyboard language on the fly, which can then mess up interaction via screen readers, but, that would, again, not really be necessarily affected by the keyboard hardware, or connection method - the driver sort of handles the connection, and then just presents the keyboard to the operating system as a keyboard - most of the time, but anyway.

Another reason don't really like wireless keyboards myself is that both bluetooth, and wireless keyboards have, in the past given me hassles relating to interference from other devices, etc. around me - at times just wifi network providers, and, a few times, when something like a cellphone received an SMS, or an MMS, the wireless keyboard might have started typing multiple characters - that should be unlikely to happen with a decent, sort of shielded wireless keyboard, but, still...<smile>

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

On 2016-05-05 1:47 PM, Gene wrote:
I don't know about specific keyboards. While I haven't seen much
discussion about this, I seem to recall seeing discussions in the past
about this or that wireless keyboard where certain commands didn't work
with NVDA, evidently because the keyboard sent incompatible codes. Can
you experiment with a keyboard directly connected?
Gene
----- Original Message -----
*From:* willmac@lantic.net <mailto:willmac@lantic.net>
*Sent:* Thursday, May 05, 2016 4:08 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA GENERAL,

Hi,
I am presently using a HP Laptop with a Wireless (not bluetooth)
keyboard. The keyboard is a Logitech K330 desktop keyboard.
Is there any reason why this shpuld not work with NVDA.
Rgds,William
------ Original Message ------
From: "Gene" <gsasner@ripco.com <mailto:gsasner@ripco.com>>
To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
Sent: 04/05/2016 15:07:08
Subject: Re: [nvda] NVDA GENERAL,
If your keyboard contains a numpad, the desktop layout will work if
the keyboard can be used in that way. The purpose of the laptop
layout is for use on keyboards without numpads. If short cut commands
don't work on your keyboard using the numpad, your keyboard may not be
compatible for thatkind of use. I have heard of instances where
wireless keyboards can't be used in this way. You can try the laptop
layout and see if those commands will work if you wish. If they
don't, you may want to ask here about wireless keyboards people use
and know are compatible using whatever keyboard choice you set in NVDA.
gene
----- Original Message -----
*From:* willmac@lantic.net <mailto:willmac@lantic.net>
*Sent:* Wednesday, May 04, 2016 7:42 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA GENERAL,

Hi Ollie,

Thank you for your response. I am using a laptop but am using a
wireless logitech full keyboards.

Is this a problem? Would usb keyboard be any diffent?

Regards,

William

------ Original Message ------
From: "Mallard" <mallard@kimabe.eu <mailto:mallard@kimabe.eu>>
To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
Sent: 04/05/2016 13:49:54
Subject: Re: [nvda] NVDA GENERAL,
Hello William,


I'm definitely not an NVDA proficient user, but your last sentence made
me think.


Are you using a laptop, by any chance?


If so, you should set your keyboard layout to "Laptop"

(NVDA Menu - Keyboard settings), and then follow the list of commands
and keyboard shortcuts for laptops, rather than the one for desktops.


hth,

Ollie





Il 04/05/2016 11:45, willmac@lantic.net <mailto:willmac@lantic.net>
ha scritto:
Hi All,
I am new to this group and must apologise at the outset for my
ignorance if I am not following tghe correct Protocol.
I am partially sight impaired and the deteriation seems to be more
rapid at he moment which has resulted in my looking for
a program which will assist me to operate my computer.
I recently installed NVDA and it seem to just what I need.
However, I seem to have difficulty in mastering even the basics and am
wondering if I can get some assistance. (Skype???)
Very few of the shortcut keys seem to work for me.
Any suggestions would be most appreciated.
Regards,
William





Re: NVDA GENERAL,

Gene
 

I don't know about specific keyboards.  While I haven't seen much discussion about this, I seem to recall seeing discussions in the past about this or that wireless keyboard where certain commands didn't work with NVDA, evidently because the keyboard sent incompatible codes.  Can you experiment with a keyboard directly connected?
 
Gene

----- Original Message -----
Sent: Thursday, May 05, 2016 4:08 AM
Subject: Re: [nvda] NVDA GENERAL,

 
Hi,
I am presently using a HP Laptop with a Wireless (not bluetooth) keyboard.  The keyboard is a Logitech K330 desktop keyboard.
Is there any reason why this shpuld not work with NVDA.
Rgds,William
 
 
 
------ Original Message ------
From: "Gene" <gsasner@...>
Sent: 04/05/2016 15:07:08
Subject: Re: [nvda] NVDA GENERAL,
If your keyboard contains a numpad, the desktop layout will work if the keyboard can be used in that way.  The purpose of the laptop layout is for use on keyboards without numpads.  If short cut commands don't work on your keyboard using the numpad, your keyboard may not be compatible for thatkind of use.  I have heard of instances where wireless keyboards can't be used in this way.  You can try the laptop layout and see if those commands will work if you wish.  If they don't, you may want to ask here about wireless keyboards people use and know are compatible using whatever keyboard choice you set in NVDA.
 
gene
----- Original Message -----
Sent: Wednesday, May 04, 2016 7:42 AM
Subject: Re: [nvda] NVDA GENERAL,

Hi Ollie,

Thank you for your response.  I am using a laptop but am using a
wireless logitech full keyboards.

Is this a problem?  Would usb keyboard be any diffent?

Regards,

William

------ Original Message ------
From: "Mallard" <mallard@...>
To: nvda@nvda.groups.io
Sent: 04/05/2016 13:49:54
Subject: Re: [nvda] NVDA GENERAL,
>Hello William,
>
>
>I'm definitely not an NVDA proficient user, but your last sentence made
>me think.
>
>
>Are you using a laptop, by any chance?
>
>
>If so, you should set your keyboard layout to "Laptop"
>
>(NVDA Menu - Keyboard settings), and then follow the list of commands
>and keyboard shortcuts for laptops, rather than the one for desktops.
>
>
>hth,
>
>Ollie
>
>
>
>
>
>Il 04/05/2016 11:45, willmac@... ha scritto:
>>Hi All,
>>I am new to this group and must apologise at the outset for my
>>ignorance if I am not following tghe correct Protocol.
>>I am partially sight impaired and the deteriation seems to be more
>>rapid at he moment which has resulted in my looking for
>>a program which will assist me to operate my computer.
>>I recently installed NVDA and it seem to just what I need.
>>However, I seem to have difficulty in mastering even the basics and am
>>wondering if I can get some assistance. (Skype???)
>>Very few of the shortcut keys seem to work for me.
>>Any suggestions would be most appreciated.
>>Regards,
>>William
>>
>
>
>
>





Reminder - Survey: NVDACon Non Visual Desktop Access Users and Developers Conference for South Asia

Bhavya shah
 

Dear all,
This is a reminder requesting to fill the survey about your interest in the possibility of NVDACon Users and Developers Conference for South Asia, similar to regional NVDACons held in USA, Korea, Japan etc. Whether you are a user of another screen reader (JAWS, Window Eyes, System Access etc.) wishing to learn more about and eventually transition to NVDA, or you are a rehabilitation trainer seeking to further understand NVDA, whether you are yourself an ardent user of NVDA, or an avid advocate of this free and open source assistive technology – an NVDA conference for our region has all the potential to benefit and teach you something. Originally conceived by fellow NVDA enthusiast froms Southern Asia, I would like to sincerely remind you that submissions for this survey are still open and you can freely share and spread the word about this idea and get involved in it by responding to this short survey at https://docs.google.com/forms/d/1P7xL7wPKHjN3GZs2Z1qBs_xZ7NEKnmWCywVk_pdBCr0/viewform?c=0&w=1

Sincerely looking forward to even more responses!
Thanks.

P.S. In case you have any questions or queries about this initiative, please feel free to contact Bhavya.shah125@.... Also, we deeply appreciate all the overwhelming amount of respondents who have already expressed their views with us through the survey.

If you have trouble viewing or submitting this form, you can fill it out in Google Forms.

NVDACon Non Visual Desktop Access screen reader Users and Developers Conference for South Asian regions

NVDA, having been founded in the year 2006 by a fascinated Australian blind programmer named Michael Curren, is now officialy ten years old today. As NVDA communities across the world celebrate this massive screen reading milestone, inspired from NVDACon International 2016 Users and Developers Conference 10th Anniversary edition, a group of people who are avid NVDA users, supporters and enthusiasts from India and Pakistan are willing to organize an NVDA conference for South Asia, where users, developers and even those simply interested in NVDA are given an opportunity to network with fellow NVDA residents, and share, discuss, learn more about and shape the future of NVDA. This survey has been authored by these NVDA loyallists and seeks to understand and ascertain the amount of interest in South Asian countries (like India, Pakistan etc.) in an NVDACon South Asia. We sincerely hope that you may take out a few minutes of your invaluable time in filling this survey questionairre carefully, to bring NVDACon South Asia to life.
* Required
    What is your full name? *
    Please provide your e-mail address below and any other contact information. Your personal contact information shall be kept strictly confidential and is being requested only in case the authors of this survey seek some further clarifications or correspondences with you.
    Are you visually impaired? If so, what is the level of your visual impairment? *
    • totally blind
    • significantly visually impaired
    • partially visually impaired
    • sighted
    Which screen reader(s) do you use on your Windows computer? You can choose more than one option in case you use certain alternatives are secondary choices, or only for testing or research purposes. *
    • NVDA (Non Visual Desktop Access)
    • JAWS (Job Access With Speech) for Windows
    • System Access/System Access To The GO
    • Window Eyes
    • Other:
    For what tasks and in what environments do you use or have used NVDA? You can choose more than one option in case you use NVDA in a variety of settings.
    • everyday use at home
    • work at office
    • education in school, college or university
    • only for software, web and accessibility testing and research purposes
    • Other:
    How proficient are you in the usage of NVDA?
    • beginner
    • intermediate
    • advanced
    Are you aware of NVDA conferences for its users and developers held internationally annually and have you participated in one? *
    • Yes, I have participated in a past NVDACon
    • I am aware of NVDACons but haven't participated in any
    • No, I am not aware of NVDACon
    How interested would you be in an NVDA conference for South Asian regions, namely NVDACon SA, similar to regional NVDA conferences such as NVDACon KR, NVDACon JP, NVDACon US etc? You can choose more than one option in case you may be interested in shouldering out multiple roles in the conference. *
    • participating
    • presenting a session
    • helping in organizing and planning
    • chairing (chiefly managing the conference)
    • not interested
    If an NVDACon South Asia does come to life, what should be the preferred language for communication in the conference? You may choose more than one option in case you wish the conference to be bi-lingual, tri-lingual and so on. *
    • Hindi
    • Urdu
    • English
    • Other:
    What online conferencing platform should the conference be based?
    • Teamtalk
    • Skype
    • I don't know
    • Other:
    Why would you like an NVDA conference to be held at the South Asian region? What do you like and feel about NVDA? What aspects related to NVDA would you like to discuss and learn more about in NVDACon SA?


Re: very good news about audio conversion soft ware

David Moore
 

Thank you so much for letting me know. Now, I feel better!
 

Sent: Thursday, May 5, 2016 5:14 AM
Subject: Re: [nvda] very good news about audio conversion soft ware
 

   Hi!

Me personally, I read it quite normally.

regards

Georgi


На 5.5.2016 г. в 10:05 ч., David Moore написа:
Hi guys,
David Moore here. This is strange that my messages sound like there is some symbol in them, because I am using Windows Live Mail on a laptop with win10. How does this message sound?
 
 
Sent: Wednesday, May 4, 2016 8:11 PM
Subject: Re: [nvda] very good news about audio conversion soft ware
 

Hi Gene,

 

When replying, the issue does not exist.  I don't see any odd characters in the place of spaces.  I am sure it is something to do with just how Thunderbird is rendering his original messages.  I have seen this a few times with some individuals located in foreign countries, so maybe it could be something to do with a font type.

 


On 5/4/2016 3:15 PM, Gene wrote:
I should alter what I said.  I should say that, in reading the messages quoted under yours, I didn't have any problems reading the first two or three.  I didn't read further.  According to Ron's message, others appear to have problems reading one of these messages in their original form.  Unless the problem is solved, what happens if you issue the reply command and try to read the message?

Gene
----- Original Message -----

From: Ron Canazzi
Sent: Wednesday, May 04, 2016 12:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware


Hi Rosemarie,

I hear that oddity with his messages too.  What is happening is that the spaces between words are some sort of unrecognizable character--unrecognizable to screen readers and certain synthesizers I would guess.  I think it may be because he is sending his messages from an IPhone or other IOS device.  It is interpreting his spaces between words as some sort of character.


On 5/4/2016 12:58 PM, Rosemarie Chavarria wrote:

  Hi, David,


  This message sounds so strange--like it's in a foreign language.


  Rosemarie




  On 5/4/2016 2:18 AM, David Moore wrote:

    There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


    -----Original Message----- From: Ben J. Bloomgren
    Sent: Wednesday, May 4, 2016 3:23 AM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] very good news about audio conversion soft ware

    How do you issue that command? Do you put it after the extension or before it?

    Ben


      On May 4, 2016, at 00:16, Shaun Everiss mailto:sm.everiss@... wrote:

      freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.




        On 4/05/2016 5:55 p.m., David Moore wrote:
        Hi,
        If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
        www.freemake.com/free_video_converter 1.. Cached
         2.. Similar

        Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
        Also, There is a website where you can upload your file and have it converted into many different formats:
        www.convertfiles.com
        There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

        From: Bobby
        Sent: Tuesday, May 3, 2016 9:25 PM
        To: nvda@nvda.groups.io
        Subject: Re: [nvda] very good news about audio conversion soft ware

        no I don't mean rip I mean converting audio that I record or down load from the internet.  I don't know whare or how to add files to convert.




        On 5/3/2016 9:04 PM, Robert Mendoza wrote:

         Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


        Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

           Well I just learned some thing new.  I never you could convert audio windows media player I only new you can rip with it.  Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


           On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

             Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what  it can or can't do,  I thought it was mainly for buying music from apple.

             -- Patrick
             Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

               Goodness gracious, yall!  Why not just use ITunes to rip for crying out
               loud!  Is it mainly because ITunes doesn't support the formats you all
               wanna rip into?  If so, then OK, point taken, but otherwise... really?
               ---
               Christopher Gilland




















--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"




Avast logo

Този имейл е проверен за вируси от Avast.
www.avast.com



Re: very good news about audio conversion soft ware

Ron Canazzi
 

Hi David,


This message sounds fine.  This is confusing.  Frankly, I don't know what is happening.  Maybe it was a mail transfer issue; some server screwed up somewhere one time.



On 5/5/2016 3:05 AM, David Moore wrote:
Hi guys,
David Moore here. This is strange that my messages sound like there is some symbol in them, because I am using Windows Live Mail on a laptop with win10. How does this message sound?


From: Ron Canazzi
Sent: Wednesday, May 4, 2016 8:11 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

Hi Gene,



When replying, the issue does not exist.  I don't see any odd characters in the place of spaces.  I am sure it is something to do with just how Thunderbird is rendering his original messages.  I have seen this a few times with some individuals located in foreign countries, so maybe it could be something to do with a font type.





On 5/4/2016 3:15 PM, Gene wrote:

I should alter what I said.  I should say that, in reading the messages quoted under yours, I didn't have any problems reading the first two or three.  I didn't read further.  According to Ron's message, others appear to have problems reading one of these messages in their original form.  Unless the problem is solved, what happens if you issue the reply command and try to read the message?

Gene
----- Original Message -----

From: Ron Canazzi
Sent: Wednesday, May 04, 2016 12:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware


Hi Rosemarie,

I hear that oddity with his messages too.  What is happening is that the spaces between words are some sort of unrecognizable character--unrecognizable to screen readers and certain synthesizers I would guess.  I think it may be because he is sending his messages from an IPhone or other IOS device.  It is interpreting his spaces between words as some sort of character.


On 5/4/2016 12:58 PM, Rosemarie Chavarria wrote:

  Hi, David,


  This message sounds so strange--like it's in a foreign language.


  Rosemarie




  On 5/4/2016 2:18 AM, David Moore wrote:

    There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


    -----Original Message----- From: Ben J. Bloomgren
    Sent: Wednesday, May 4, 2016 3:23 AM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] very good news about audio conversion soft ware

    How do you issue that command? Do you put it after the extension or before it?

    Ben


      On May 4, 2016, at 00:16, Shaun Everiss mailto:sm.everiss@... wrote:

      freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.




        On 4/05/2016 5:55 p.m., David Moore wrote:
        Hi,
        If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
        www.freemake.com/free_video_converter 1.. Cached
         2.. Similar

        Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
        Also, There is a website where you can upload your file and have it converted into many different formats:
        www.convertfiles.com
        There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

        From: Bobby
        Sent: Tuesday, May 3, 2016 9:25 PM
        To: nvda@nvda.groups.io
        Subject: Re: [nvda] very good news about audio conversion soft ware

        no I don't mean rip I mean converting audio that I record or down load from the internet.  I don't know whare or how to add files to convert.




        On 5/3/2016 9:04 PM, Robert Mendoza wrote:

         Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


        Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

           Well I just learned some thing new.  I never you could convert audio windows media player I only new you can rip with it.  Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


           On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

             Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what  it can or can't do,  I thought it was mainly for buying music from apple.

             -- Patrick
             Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

               Goodness gracious, yall!  Why not just use ITunes to rip for crying out
               loud!  Is it mainly because ITunes doesn't support the formats you all
               wanna rip into?  If so, then OK, point taken, but otherwise... really?
               ---
               Christopher Gilland




















--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"



--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: nvda line number for deaf and blind

 

You know I would really like nvda to speak whenn enter is pressed to make a new line in thunderbird and notepad and other things even if I have commannd keys disabled.
Also punctuation when I say delete a . it doesn't say it all the time I have the level set on some but I really do want it read if I start killing it.
when I hit backspace in thunderbird it may not anounce the first 3 or so chars and I may end killing something I don't want.
Its ok if I hit delete and it only happens at the end of lines however as long as I am carefull.

On 5/05/2016 8:03 p.m., ChrisLeo wrote:
Hello,

Actually NVDA does not ALLOWS to show line numbers on display braille.

If it is necessary, a solution could be an add-on

with a shortcut to toggle the report of line number.

Cheers.




Chris.

ilanvpnina@gmail.com, 03/05/2016 14:36:
[Edited Message Follows]

hello i am deaf and blind

and using nvda

i tried all shortcuts and also

changed

the pref. document fromatting to include line nmuber

but i dont see the braille number in my braille dispaly

any idea or help?

thanks

#HELP #BUG #DEAF


Re: voices again

 

Another difference between the Codefactory and Tifflatechnia versions is that with Codefactory, if you want to use it on a portable copy, you have to activate it on every single PCs you want to use, and deactivate it afterwords, whereas with Tifflatechnia version, you only need to activate your USB/portable drive and it will work. I've tested this on computers in my college and Tifflatechnia version worked very well, without reactivation.