Date   

Re: I've largely changed my mind about Chrome, I like it muchmore now

Steve Nutt
 

Hi,

 

You could still do what Jean was suggesting though, by pressing Control-T first, not Control-N.  As you say, this is a faster way of doing it.

 

All the best


Steve

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Chris Norman via Groups.Io
Sent: 15 May 2018 15:33
To: nvda@nvda.groups.io
Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

Not to split hairs, but it's a new tab (which loads faster AFAIK) not a new window.

 

It still saves you a keystroke per search - assuming you want the search results in a new tab. Also, if you accidnetally search from the wrong tab it helps loads.

 

On Tue, May 15, 2018 at 3:29 PM, Gene <gsasner@...> wrote:

I just checked.  Typing an address and then using alt enter does open the page in a new window.  It does this in a search or when typing an address.  It's a nice convenience, but it doesn't make much difference since, as I said before, you can use control n to open a new window first, then open a page.

 

Gene

----- Original Message -----

From: Gene

Sent: Tuesday, May 15, 2018 9:11 AM

Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

I had thought, when I read about what alt enter does in a previous message, that it would do the same thing if you type an address.  I see from Brian's message that alt enter evidently only does this when in a list of results from a search that you see by doing a search using that field.  It should take this action when searching for a book mark in this way as well because you are in the same search list.  But it would be good if someone who uses the feature would clarify the points.

 

I say, off an on, never to assume in unfamiliar contexts or environments when dealing with computers.  I assumed what would happen when typing an address and not being in the list and that assumption may well be wrong.  Experimentation is fine, but you can't assume in an unfamiliar context when dealing with computers.

 

Gene

----- Original Message -----

 

 

From: Gene

Sent: Tuesday, May 15, 2018 8:54 AM

Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

I'm not sure Firefox informs you when a popup has been blocked.  I don't recall seeing such messages.  You can never assume anything in unfamiliar environments. I don't use Chrome enough to know if message information isn't automatically read.  But taking the same action repeatedly, time after time, in any context dealing with computers accomplishes nothing in general.  It assumes that computers are illogical and that repeating the same failed action many times will produce a different result.  If two or three times  doesn't accomplish anything, repetition further is very unlikely to.  Repeating something a time or two may produce results because some transient condition may prevent the command from being carried out. 

 

But the first question is, are status messages not read in Chrome and to answer that question, we need to know what actions produce them, then test by taking those specific actions.

 

Gene

----- Original Message -----

From: Kenny

Sent: Tuesday, May 15, 2018 7:06 AM

Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

And if you use Microsoft Edge or FireFox, you're immediately informed via a notification bar message that a file has been queued and if you wish to "Run" or "Save" it. NVDA automatically reads these messages with no problems.

 

OK, so you use the Download Manager to monitor if a download has started in Chrome. What do you do to know if a pop-up was blocked on a page, and you're clicking the link over and over again not knowing what the hell is going on? Maybe if NVDA read the dynamic message informing you that a popup was blocked, then you could take an "Action" to disable the blocker for that page?

 

So my problem deals with NVDA not automatically reading any dynamic content displayed in this Chrome Actions bar.

 

On 5/15/2018 4:20 AM, Steve Nutt wrote:

Hi Kenny,

 

I’m not aware that downloads speak in any screen reader.  I believe this should be a Chrome change.

 

However, it’s easy enough for me to press Control-J and go look at the percentages.  Once it’s in focus, it should be read to you.

 

All the best


Steve

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kenny
Sent: 15 May 2018 02:02
To: nvda@nvda.groups.io
Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

Thanks for sharing the proper shortcut.

 

I'm curious why hasn't NVDA been configured to speak these "Actions" when they dynamically appear in Google Chrome? This is the only issue I have with the browser.

 

You click on a link to download a file and you have no idea the download has started. You have to hit Ctrl+j to bring up the Download Manager to check. Even other Actions aren't spoken automatically by NVDA for the Chrome browser.

 

Can't that cool NVDA installation progress sound be configured to activate for the download progress for Chrome too?

 

On 5/14/2018 5:21 PM, Steve Nutt wrote:

Hi,

 

Alt+Shif    t+A should get you into what Chrome calls Actions, which are the notifications.

 

All the best

 

Steve

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kenny
Sent: 10 May 2018 04:31
To: nvda@nvda.groups.io
Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

Can you please share your tutorial with the list again?

 

I'm hoping you gone over a work around to have the messages being pushed to Chrome's notification bar automatically read by NVDA?

 

Also what is the shortcut key to be placed in the notification bar? The alt+n key combination doesn't seem to work. Thanks.

 

On 5/6/2018 6:21 PM, David Moore wrote:

Hi all!

I have been telling people just how great Chrome is for two and a half years.

I am so happy that all of you are finding it to be true.

If anyone needs my text tutorial I wrote on how to use Chrome, and take you through all settings, I will paste it on the list.

I have done this around ten times on all the lists, but you are still finding out for the first time, just how great Chrome is.

Just read works great for just reading an article on the page.

CTRL+J allows you to hear the status of the downloads. Now, CTRL+Shift+O allows you to open the bookmarks manager, and you can arrange them in different folders and back them up.

Chrome is great with Youtube, and streaming media. Chrome is good for a lot other than just simple browsing.

Have a great one, and I am celebrating that you are finally getting used to Chrome!

David Moore

Sent from Mail for Windows 10

 

From: juan gonzalez
Sent: Sunday, May 6, 2018 5:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it muchmore now

 

I use the add on called sound on for navigational sounds.

 

-----Original Message-----

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail list account via Groups.Io

Sent: Sunday, May 6, 2018 9:28 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] I've largely changed my mind about Chrome, I like it much more now

 

Would anyone know if Chrome has sounds? one of the annoyances with current firefox is figuring out when downloads are finished or when a page is refreshing itself, ie you normally hear the ticks  in the old version due to navigational sounds.

Until i find a browser with this function of sound I'm loathe to get a new browser over ff52, but the problem is that I've been reading that some sites now do not support the old versions of Firefox and tell you so when you have things like modal windows whatever they are.

On XP to make Firefox perform even reasonably you need to use a version 45, as after this the actual load up times are hugely slowed, my guess is that the code is made for multi processor  devices, not single core ones.This is also why on xp you might find that Chrome and firefox are similar in page loading times.

 

Things are no pushing ahead so fast on sites that its not uncommon to see the message you browser is unsupported get this or that then you can come back.

To me this is a weird thing for commercial sites to do, as they are, in effect pushing away potential customers, but hey, that is their business.

Brian

 

bglists@...

Sent via blueyonder.

Please address personal E-mail to:-

briang1@..., putting 'Brian Gaff'

in the display name field.

----- Original Message -----

From: "Gene" <gsasner@...>

To: <nvda@nvda.groups.io>

Sent: Sunday, May 06, 2018 10:57 AM

Subject: [nvda] I've largely changed my mind about Chrome, I like it much more now

 

 

I may have sent messages in the past in which I expressed a much stronger liking for Firefox than Chrome.  At this point, I've changed my mind and, unless things change over time, as they may as Firefox continues to implement its new internal technical changes, I consider Chrome to be superior for general browsing. I haven't tested it for uses such as streaming or RSS or other uses.  I will therefore only address general browsing and the interface.  Others may want to comment on other aspects I haven't compared.

 

This is a long message, a bit of a review and a bit of discussion of the interface.  I hope those interested in the subject find it useful.

 

If you try Chrome and find it superior for general browsing, you may still not want to use Chrome as your main browser.  There are various considerations.  I'll explain why I changed my mind and what you may want to consider.  You may have other or different considerations as well.

 

The reason I say Chrome is better for general browsing is because it loads pages faster than Firefox.  You may want to compare and see if the difference is important to you.  There is a very noticeable difference.  I hadn't compared Chrome with Firefox for speed on a fast machine.  I compared them on a slow machine running XP perhaps six or eight months ago.  I had expected that, if Chrome was faster, there would have been a noticeable difference, even though the machine was slow.  But there wasn't a difference that amounted to anything.

 

I recently decided to compare on a reasonably fast machine running Windows 7 since many people have said on lists I'm on that Chrome is faster.  There is a very noticeable difference in speed on my Windows 7 machine.  I don't know what the results would have been on a fast XP machine.

 

I haven't used Chrome much but the increase in speed is the reason I say it's better for general browsing.

 

The Chrome interface is different than Firefox or Internet Explorer.  It isn't difficult to learn but it is different.  You will likely want a tutorial or some instructional material.  If you are good at learning by exploring, you may not want or need such material, at least not to use in depth, but you may benefit in early learning by using material.

 

The main things to know in terms of the differences in the interface are that Chrome shows many things as web pages, such as settings and history and there is one menu, which you can open with alt f, that is, hold alt and press f.  Of course, there are submenus and there are also items that open like web pages such as settings.

 

I don't recall if there are classic dialogs that open from the main menu.

But if you work with settings, you need to know that the settings interface doesn't work quite properly in the following way:

It's a web page-like interface but there some controls that don't work as they should.  I tried to activate two buttons today and I couldn't do so in browse mode using NVDA.  I don't know what JAWS does.  I had to manually go into forms mode, and activate the buttons.  I may have had to tab to the button because forms mode may not have been properly calibrated with browse mode in that interface, at least at times.

 

I seem to recall that in another instance, I needed to be in browse mode to activate something but I'd have to experiment more to know if that is the case since I don't have a clear memory of whether that was necessary.

 

There's a very useful settings search feature in settings.

 

One of my main objections to Chrome in the past was that the book marks interface is not nearly as comvenient to work with as Firefox because the search feature in Chrome book marks appears to be inaccessible.  I very recently learned from someone on a list I follow that this problem can be more or less eliminated.  I say more or less because I haven't played with it much, but enough to see that it works well or reasonably well.  I'm hedging because I'd want to play with it more before saying just how well it works.  It' appears to work well from the very little testing I've done.  If you are in the address bar, you can type some or all of what you want to find such as york times or new york times and you can up and down arrow through results.  Some of them will be search results using a search engine but the top results in the list should be from book marks and history.  Try reading the current line after typing to see if that contains the first result.  I haven't played with the feature more than a little and I'm not sure.  But if it works well, this would eliminate what I consider to be an important deficiency. In other words, this feature may make book marks just as easy to use in Chrome as in Firefox.

 

If you use Firefox extensions that you consider important and use them a lot, that may be a consideration in which browser you want to use.  and then, there's just convenience of not learning a new interface and continuing to use the familiar Firefox.  You, of course, can determine questions like that.  It's nice to have pages load a good deal faster, but the importance of speed may vary from user to user.  But if you haven't compared with a hands on test, you may wish to.

 

Browsing is either identical or nearly identical between the browsers because they both use browse mode, or the Virtual PC cursor, which is the JAWS name for the same thing.

 

So you can compare by installing Chrome, and then opening and using some web sites.  Control l moves you to the address bar, just as in Firefox.  I believe when you open Chrome, you are automatically placed on the address bar, but you can check.  If you want to make sure, it takes almost no time to execute control l.

 

I hope those who are interested in this subject find these comments useful.

If people are curious or dissatisfied with Firefox or another browser, they may want to try Chrome.  I haven't used Edge at all so I don't know how Edge compares.

 

Gene

 

 

 

 

 

 

 

 

 

 



 

--

 

Take care,

 

Chris Norman

 


Re: In-Process 15th May

Quentin Christensen
 

Ah great, sorry about the delay.  It's the first time in ages I've forgotten to tag the post properly to begin with.

On Wed, May 16, 2018 at 11:20 AM, Gary Metzler <gmtravel@...> wrote:

Hi Quentin,

 

It showed up this afternoon.  Thanks,

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Tuesday, May 15, 2018 7:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] In-Process 15th May

 

Hi Gary,

 

When I hit "Publish", I forgot to tag it as "In-Process".  I did go back and amend that last night - so it shows up on the https://www.nvaccess.org/category/in-process/ page, but maybe your RSS feed didn't pick that up?

 

On Wed, May 16, 2018 at 4:22 AM, Gary Metzler <gmtravel@...> wrote:

Hi Quentin,

 

I have the in process set up to come into outlook as an rss feed.  Does it take awhile for it to come into my feed list?  Thanks,

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Tuesday, May 15, 2018 12:17 AM
To: nvda@nvda.groups.io
Subject: [nvda] In-Process 15th May

 

HI everyone,

 

This week's In-Process is out, and it includes some of the goodness you can expect from NVDA 2018.2, plus an update on our first Certified Expert in India and a hat-tip to our Windows Insiders

 

 

#NVDAsr

 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: In-Process 15th May

Gary Metzler
 

Hi Quentin,

 

It showed up this afternoon.  Thanks,

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Tuesday, May 15, 2018 7:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] In-Process 15th May

 

Hi Gary,

 

When I hit "Publish", I forgot to tag it as "In-Process".  I did go back and amend that last night - so it shows up on the https://www.nvaccess.org/category/in-process/ page, but maybe your RSS feed didn't pick that up?

 

On Wed, May 16, 2018 at 4:22 AM, Gary Metzler <gmtravel@...> wrote:

Hi Quentin,

 

I have the in process set up to come into outlook as an rss feed.  Does it take awhile for it to come into my feed list?  Thanks,

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Tuesday, May 15, 2018 12:17 AM
To: nvda@nvda.groups.io
Subject: [nvda] In-Process 15th May

 

HI everyone,

 

This week's In-Process is out, and it includes some of the goodness you can expect from NVDA 2018.2, plus an update on our first Certified Expert in India and a hat-tip to our Windows Insiders

 

 

#NVDAsr

 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: In-Process 15th May

Quentin Christensen
 

Hi Gary,

When I hit "Publish", I forgot to tag it as "In-Process".  I did go back and amend that last night - so it shows up on the https://www.nvaccess.org/category/in-process/ page, but maybe your RSS feed didn't pick that up?

On Wed, May 16, 2018 at 4:22 AM, Gary Metzler <gmtravel@...> wrote:

Hi Quentin,

 

I have the in process set up to come into outlook as an rss feed.  Does it take awhile for it to come into my feed list?  Thanks,

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Tuesday, May 15, 2018 12:17 AM
To: nvda@nvda.groups.io
Subject: [nvda] In-Process 15th May

 

HI everyone,

 

This week's In-Process is out, and it includes some of the goodness you can expect from NVDA 2018.2, plus an update on our first Certified Expert in India and a hat-tip to our Windows Insiders

 

 

#NVDAsr

 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: New to NVDS?

Cearbhall O'Meadhra
 

Bonnie,

 

Welcome to the NVDA community! You had me mystified for a while!

 

Do you need any help with it all?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Bonnie Rowley
Sent: Tuesday, May 15, 2018 11:10 PM
To: NVDA <nvda@nvda.groups.io>
Subject: Fw: [nvda] New to NVDS?

 

Yes, it was a typo. If I'd had NVDA talking to me when I typed it, I would have probably gotten it right. My apologies..

Bonnie

----- Original Message -----
From: Cearbhall O'Meadhra <cearbhall.omeadhra@...>
Reply-To: <nvda@nvda.groups.io>
To: <nvda@nvda.groups.io>
Sent: 5/14/2018 12:51:55 PM
Subject: Re: [nvda] New to NVDS?
________________________________________________________________________________

Hi,

What is NVDS? Is this just a misprint?

All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, May 14, 2018 5:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] New to NVDS

Hi,
Several tutorials come to my mind:
* Basic Training Module from NV Access
* Various videos from American Foundation for the Blind and other
organizations
* My own tutorial set (Welcome to NVDA 2018)
* For Windows 10 users, there is a textbook by CathyAnne Murtha that goes
over how to use Windows 10 with NVDA.
Cheers,
Joseph


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Christopher
Gray
Sent: Monday, May 14, 2018 8:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] New to NVDS

Hi Joseph and All:

I am also new to NVDA, just loaded it up about a week ago and have been
experimenting with it.  I come to NVDA as a longtime Cobra user, and a
parttime WindowEyes user.  I feel strongly that I need a screenreader that
is currently under development and reacting to Windows and windows-based
software as things change over time.

Joseph, I saw your note about tutorials and wonder if you might suggest
current ones?

Thank you.

Chris

****************************************
Have you considered Annual Giving or including a gift to Missouri Council of
the Blind in your Will or Estate Plan?  Contact me as shown below and I can
help you with this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone:     (314) 832-7172
Toll-free: (800) 342-5632
Fax:       (314) 832-7796

Like Jazz?  Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice,
Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M.
Pacific Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to Past
Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.









Re: New to NVDS

Bonnie :-)
 

Gene, thanks for that link. Looks like a lot of helpful info there.

Bonnie

----- Original Message -----
From: Gene New Zealand <hurrikennyandopo@outlook.co.nz>
Reply-To: <nvda@nvda.groups.io>
To: <nvda@nvda.groups.io>
Sent: 5/14/2018 5:30:06 PM
Subject: Re: [nvda] New to NVDS
________________________________________________________________________________

Hi


If you are interested in nvda tutorials as well my website that i am
putting together may be of interest to a new user of nvda. It only has
the desk top commands for nvda as that is what i use plus other
blindness related material. it can be found at
http://www.accessibilitycentral.net

the link is to the main web site with pages coming off it. if you want
mostly nvda tutorials instead of the main page book mark one of the nvda
tutorials when you go into it and it will give you links to other nvda
tutorials.


There is both written and audio tutorials.


Gene nz



On 5/15/2018 4:30 AM, Joseph Lee wrote:
Hi,
Several tutorials come to my mind:
* Basic Training Module from NV Access
* Various videos from American Foundation for the Blind and other
organizations
* My own tutorial set (Welcome to NVDA 2018)
* For Windows 10 users, there is a textbook by CathyAnne Murtha that goes
over how to use Windows 10 with NVDA.
Cheers,
Joseph


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Christopher
Gray
Sent: Monday, May 14, 2018 8:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] New to NVDS

Hi Joseph and All:

I am also new to NVDA, just loaded it up about a week ago and have been
experimenting with it. I come to NVDA as a longtime Cobra user, and a
parttime WindowEyes user. I feel strongly that I need a screenreader that
is currently under development and reacting to Windows and windows-based
software as things change over time.

Joseph, I saw your note about tutorials and wonder if you might suggest
current ones?

Thank you.

Chris

****************************************
Have you considered Annual Giving or including a gift to Missouri Council of
the Blind in your Will or Estate Plan? Contact me as shown below and I can
help you with this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone: (314) 832-7172
Toll-free: (800) 342-5632
Fax: (314) 832-7796

Like Jazz? Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice,
Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M.
Pacific Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to Past
Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.







Re: Question about Web Browsing

Christopher Gray
 

Good deal, many thanks.

Chris

On Tue, 15 May 2018, Jackie wrote:

Hello, Christopher. The command you're looking for is NVDA + control +
f. When I say "NVDA", I mean the modifier key you've chosen as your
NVDA key, ie, caps lock, numpad insert, etc. HTH.

On 5/15/18, Christopher Gray <chris@moblind.org> wrote:
Hi:

Please forgive a somewhat open-ended question. I come to NVDA with just
over a
week of experience, and things have gone pretty well. Before now, I have
been a
Cobra users for many years, back to about 1994, and when necessary a
Window-Eyes
user. Those are my points of reference. I have reveiwed and then read the
NVDA
User manual on the online Help system and found it pretty useful.

The area where I'm having some trouble is in web browsing, mostly on
Amazon.com
thus far. I am used to having a command in Cobra, ctrl+f, which was an
internal
Find command, not an Internet Explorer command. Is there an equivalent in
NVDA
or some alternative technique available to find things on a screen without
disturbing the screen itself or opening some sort of mode in the software
program itself?? Also, after I choose an item to examine or purchase on
Amazon,
that part of the screen seems to go blank. I don't know how to get things
to
reset. Any NVDA advice on this would be most welcome.

I've seen some conversation here about Chrome and if my best solution is to

start using Chrome, I could do that. Is there NVDA/Chrome-based information
to
help me get started?

Any pointers to commands or an overall approach will be very much
appreciated.

Thank you.

Chris

****************************************
Have you considered Annual Giving or including a gift to Missouri Council of
the Blind in
your Will or Estate Plan? Contact me as shown below and I can help you with
this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone: (314) 832-7172
Toll-free: (800) 342-5632
Fax: (314) 832-7796

Like Jazz? Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice,
Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M.
Pacific
Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to
Past Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.





--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


****************************************
Have you considered Annual Giving or including a gift to Missouri Council of the Blind in
your Will or Estate Plan? Contact me as shown below and I can help you with this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone: (314) 832-7172
Toll-free: (800) 342-5632
Fax: (314) 832-7796

Like Jazz? Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice, Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M. Pacific
Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to
Past Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.


query accessibility of Zipra

Craig
 

Hi.

 

Anyone has tried using this software and have any success with it?

 

Thanks

Craig.

 

 

 

Cheers Craig

 

Craig& his Guide dog Winnie

 

 

Far beyond the Shrouded hours of dawn

Through the mist Of daybreak I was borne

But the day was Clouded still by night

Leaving me in the land of no light

 

 

Title of song: Echoes In The Dark

Performed by: Uriah Heep - Songwriters: Hensley, Ken

 


Re: Question about Web Browsing

Jackie
 

Hello, Christopher. The command you're looking for is NVDA + control +
f. When I say "NVDA", I mean the modifier key you've chosen as your
NVDA key, ie, caps lock, numpad insert, etc. HTH.

On 5/15/18, Christopher Gray <chris@moblind.org> wrote:
Hi:

Please forgive a somewhat open-ended question. I come to NVDA with just
over a
week of experience, and things have gone pretty well. Before now, I have
been a
Cobra users for many years, back to about 1994, and when necessary a
Window-Eyes
user. Those are my points of reference. I have reveiwed and then read the
NVDA
User manual on the online Help system and found it pretty useful.

The area where I'm having some trouble is in web browsing, mostly on
Amazon.com
thus far. I am used to having a command in Cobra, ctrl+f, which was an
internal
Find command, not an Internet Explorer command. Is there an equivalent in
NVDA
or some alternative technique available to find things on a screen without
disturbing the screen itself or opening some sort of mode in the software
program itself?? Also, after I choose an item to examine or purchase on
Amazon,
that part of the screen seems to go blank. I don't know how to get things
to
reset. Any NVDA advice on this would be most welcome.

I've seen some conversation here about Chrome and if my best solution is to

start using Chrome, I could do that. Is there NVDA/Chrome-based information
to
help me get started?

Any pointers to commands or an overall approach will be very much
appreciated.

Thank you.

Chris

****************************************
Have you considered Annual Giving or including a gift to Missouri Council of
the Blind in
your Will or Estate Plan? Contact me as shown below and I can help you with
this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone: (314) 832-7172
Toll-free: (800) 342-5632
Fax: (314) 832-7796

Like Jazz? Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice,
Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M.
Pacific
Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to
Past Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.




--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


Question about Web Browsing

Christopher Gray
 

Hi:

Please forgive a somewhat open-ended question. I come to NVDA with just over a week of experience, and things have gone pretty well. Before now, I have been a Cobra users for many years, back to about 1994, and when necessary a Window-Eyes user. Those are my points of reference. I have reveiwed and then read the NVDA User manual on the online Help system and found it pretty useful.

The area where I'm having some trouble is in web browsing, mostly on Amazon.com thus far. I am used to having a command in Cobra, ctrl+f, which was an internal Find command, not an Internet Explorer command. Is there an equivalent in NVDA or some alternative technique available to find things on a screen without disturbing the screen itself or opening some sort of mode in the software program itself?? Also, after I choose an item to examine or purchase on Amazon, that part of the screen seems to go blank. I don't know how to get things to reset. Any NVDA advice on this would be most welcome.

I've seen some conversation here about Chrome and if my best solution is to start using Chrome, I could do that. Is there NVDA/Chrome-based information to help me get started?

Any pointers to commands or an overall approach will be very much appreciated.

Thank you.

Chris

****************************************
Have you considered Annual Giving or including a gift to Missouri Council of the Blind in
your Will or Estate Plan? Contact me as shown below and I can help you with this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone: (314) 832-7172
Toll-free: (800) 342-5632
Fax: (314) 832-7796

Like Jazz? Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice, Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M. Pacific
Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to
Past Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.


Fw: [nvda] New to NVDS?

Bonnie :-)
 

Yes, it was a typo. If I'd had NVDA talking to me when I typed it, I would have probably gotten it right. My apologies..

Bonnie

----- Original Message -----
From: Cearbhall O'Meadhra <cearbhall.omeadhra@...>
Reply-To: <nvda@nvda.groups.io>
To: <nvda@nvda.groups.io>
Sent: 5/14/2018 12:51:55 PM
Subject: Re: [nvda] New to NVDS?
________________________________________________________________________________

Hi,

What is NVDS? Is this just a misprint?

All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, May 14, 2018 5:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] New to NVDS

Hi,
Several tutorials come to my mind:
* Basic Training Module from NV Access
* Various videos from American Foundation for the Blind and other
organizations
* My own tutorial set (Welcome to NVDA 2018)
* For Windows 10 users, there is a textbook by CathyAnne Murtha that goes
over how to use Windows 10 with NVDA.
Cheers,
Joseph


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Christopher
Gray
Sent: Monday, May 14, 2018 8:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] New to NVDS

Hi Joseph and All:

I am also new to NVDA, just loaded it up about a week ago and have been
experimenting with it.  I come to NVDA as a longtime Cobra user, and a
parttime WindowEyes user.  I feel strongly that I need a screenreader that
is currently under development and reacting to Windows and windows-based
software as things change over time.

Joseph, I saw your note about tutorials and wonder if you might suggest
current ones?

Thank you.

Chris

****************************************
Have you considered Annual Giving or including a gift to Missouri Council of
the Blind in your Will or Estate Plan?  Contact me as shown below and I can
help you with this.

----------------------------------------
Christopher Gray, Executive Director
Missouri Council of the Blind

5453 Chippewa
St. Louis, MO 63109
Phone:     (314) 832-7172
Toll-free: (800) 342-5632
Fax:       (314) 832-7796

Like Jazz?  Want to know more about jazz?
Tune into "A Journey into Jazz" with the Jazz Guys on the Global Voice,
Chris and Don.
Listen live each Wednesday at 00:00 Utc, 7:00 P.M. Eastern, 4:00 P.M.
Pacific Find us by going to theglobalvoice.info/broadband.pls.
Can't listen live? go to theglobalvoice.info and choose the "Listen to Past
Shows" link any time during the week after each live broadcast.
You can also go to the link www.jazzguys.libsyn.com for the podcasts!
Or, subscribe to us through iTunes or TuneIn Radio.










Re: Windows 10 spring creators file explorer extremely unresponsive, or not providing timely feedback?

Jacob Kruger
 

You can also turn off preview pane option under file explorer options, type that into windows start menu search box, ctrl + tab over to view page, tab over to treeview, hit end key to jump to bottom, and then arrow up until you find the preview pane option, and, use space bar to toggle it on/off.


Don't know if this really made too much of a difference on my side, but anyway.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile...but, acceptance is versatile..."

On 5/15/2018 8:47 PM, Roger Stewart wrote:
I have also noticed that sometimes when in a list of files and folders, there seems to be some sluggishness in reading what is highlighted.  I tried several places and hitting alt + P does absolutely nothing at all. I tried just opening a folder, then I tried searching for file explorer and finally I just tried it on the desktop.  That key combo does nothing anywhere on my machine.  Is there another way to get the responsiveness back?

Thanks.

Roger









On 5/14/2018 4:13 PM, Steve Nutt wrote:

Hi,

 

Just press Alt-P in Explorer, and if it says Checked, then press enter to uncheck it, or just press escape.

 

All the best


Steve

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: 09 May 2018 09:35
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows 10 spring creators file explorer extremely unresponsive, or not providing timely feedback?

 

First, check to see that the preview pane is off.  I don't have Windows 10 and I'm not sure just how you would do this.  Someone else should be able to tell you.  If it already is or if turning it off doesn't solve the problem, try this.

 

Try holding control when moving through the files list and see if that makes moving fast.  When you get to the file you want to select, press the space bar.  If you have moved in the list before, or selected a file in some other way, unselect the file before moving with control space if you are on the file.  Or it may just be easier to press home, then do control space to unselect the first item, it will be the only item selected until you unselected it with control space, as I described.  hold control before moving, move to the file you want, then press the space bar while still holding control, then releasing both keys. 

 

I'm not sure what is causing the slow movement but on my Windows 7 machine, holding control while moving speeds up movement significantly. 

 

You may find that movement is speeded up on your other machine as well. 

 

From: Jacob Kruger

Sent: Wednesday, May 09, 2018 3:01 AM

Subject: [nvda] Windows 10 spring creators file explorer extremely unresponsive, or not providing timely feedback?

 

Firstly, I have two separate machines, both running 64 bit versions of
latest windows 10 spring creators update, and, while my primary work
machine is a lenovo w52 laptop, with 8Gb of RAM, and a standard 500Gb
hard disk drive, my other, secondary machine is a desktop PC, also with
8Gb of RAM, but, it has a 275Gb solid state drive as it's operating
system drive.


The reason I am posting this here is that while the desktop Pc seems to
work pretty responsively with NVDA 2018.1.1, and latest windows 10 app
essentials add-on installed, the lenovo laptop is extremely sluggish at
times when it comes to just trying to browse files using windows own
file explorer, in terms of reading out file names to me as I arrow
around, even allowing me to request read current line output - just says
nothing a lot of the time, etc., etc., and I have tried both the NVDA
next snapshots, and the NVDA master snapshot - that's what am currently
running, but, it doesn't seem to make much of a difference.


This machine seems to work pretty well in all other environments, and,
if I fire up something like an alternative file browser, like free
commander XE, then it responds just like it used to, but, I would prefer
to stick to standard file explorer if possible.


Anyway, in terms of these two machines, the other primary difference is
that, while the lenovo laptop should have higher/better performance in
terms of hardware, besides the solid state drive, since it's my primary
work machine, which I use for forms of web application/software
development, it means it's also a bit more cluttered at the moment in
terms of additional software packages installed, has been running on the
current installation of windows, which was then upgraded to spring
creators recently, a lot longer than the desktop, which I did a clean
installation of windows 1704 on a couple of months ago, etc., etc.


In any case, does anyone have any suggestions about what I could, or
should try out to get the laptop to start responding to file browsing
like it did before the spring creators update, or do I most likely just
need to in fact do a clean install of a new copy of windows 10 spring
creators update on it's own?


And, yes, for example, in file explorer settings, I turned off things
like the preview pane, have switched it over to list view only, etc.,
etc., but anyway.


TIA


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile...but, acceptance is versatile..."





Re: I trust this error will be fixed soon.

Brian's Mail list account <bglists@...>
 

What seems to be going on here is that the error is stopping the file downloading in Firefox. The odd thing is that even in the release version the error is there, but that always does download the file.
its really very odd.
It may be the error itself ifs a red herring to this and its some interaction between nvda and Firefox that is losing the file when its downloaded in this way.
I guess its yet another unexplained thing like why some of my machines hang when they reboot nvda after a new version is updated.
Only about one other person seems to get the oddity.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Sarah k Alawami" <marrie12@gmail.com>
To: "nvda list list" <nvda@nvda.groups.io>
Sent: Tuesday, May 15, 2018 6:20 PM
Subject: Re: [nvda] I trust this error will be fixed soon.


Hmm. Odd? I just managed to download the update successfully a few days ago. And it did install. I don't know how to read the log, but are you saying in summary that you are having a different experience?

On May 15, 2018, at 9:39 AM, Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io> wrote:

Its At present, its not possible to use the download install link in the add ons menu as it always gives an nvda error as in my recent ticket. its happening on master and next so its probably been there for a while now.
if you download and do this outside nvda, and save a file it then seems to install. Its only the internal option that is broken.

IO - speech.speak (17:31:22.140):
Speaking [LangChangeCommand ('en_GB'), u'\u2022 Author: Tony Malykh']
IO - inputCore.InputManager.executeGesture (17:31:24.213):
Input: kb(desktop):tab
IO - speech.speak (17:31:24.246):
Speaking [LangChangeCommand ('en_GB'), u'stable version', u'link']
IO - inputCore.InputManager.executeGesture (17:31:26.150):
Input: kb(desktop):enter
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (17:31:26.217):
accRole failed: (-2147024809, 'The parameter is incorrect.', (None, None, None, 0, None))
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (17:31:26.549):
accRole failed: (-2147024809, 'The parameter is incorrect.', (None, None, None, 0, None))
DEBUGWARNING - RPC process 1332 (nvda_slave.exe) (17:31:26.612):
Python warning:
C:\Program Files (x86)\NVDA\library.zip\configobj.py:28: DeprecationWarning: The compiler package is deprecated and removed in Python 3.x.
ERROR - RPC process 1332 (nvda_slave.exe) (17:31:26.638):
__main__.main:
slave error
Traceback (most recent call last):
File "nvda_slave.pyw", line 101, in main
ValueError: No such action
IO - inputCore.InputManager.executeGesture (17:31:41.309):
Input: kb(desktop):control+alt+r
IO - speech.speak (17:31:41.384):
Speaking [LangChangeCommand ('en_GB'), u'Taskbar']
IO - speech.speak (17:31:41.424):
Speaking [LangChangeCommand ('en_GB'), u'reboot nvda with log terminal']
IO - speech.speak (17:31:41.426):
Speaking [LangChangeCommand ('en_GB'), u'80 space', u'blank']
INFO - core.main (17:31:41.471):
Exiting

This was an attempt to download sentence navigation add on.
Windows 7 Firefox 57esr.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.



Re: screenwriting software that works with NVDA

Brian's Mail list account <bglists@...>
 

I think it depends like everything else on the tool that made it and whether it was accessible or not.
brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Marshall handheld Flax" <m.droid.flax@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, May 15, 2018 5:52 PM
Subject: Re: [nvda] screenwriting software that works with NVDA


Brian, I think it's exactly the opposite...not graphics based at all.

You do need punctuation to be read, since a stage direction is surrounded
by double-asterisks. For example: **FADE IN:**
And you do need to have all-caps word sound different from
mixed-capitalization words, since an all-cap line indicates who is speaking.

But I can't see any reason why these would be significant barriers! A
longer example is at https://fountain.io/_downloads/Big-Fish.fountain

Marshall

On Tue, May 15, 2018 at 12:41 PM, Brian's Mail list account via Groups.Io <
bglists=blueyonder.co.uk@groups.io> wrote:

Am I right in thinking that anything written to screen this way is
inherently inaccessible as its graphics based?
Should we really be being complicit in such an endeavour? :-)

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Marshall handheld Flax" <
m.droid.flax@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, May 15, 2018 3:47 PM
Subject: Re: [nvda] screenwriting software that works with NVDA


You want to use https://fountain.io/

It is a text-only format that has some simple markup to indicate
formatting. So you can use whatever text editor you wish -- notepad,
wordpad, vi, emacs ... anything.

All you need to do is follow a few rules. For example, transitions are a
line that is all uppercase and ends with a colon. A caret (shift-6)
indicates two speakers are talking at once. A line that starts with "int"
or "ext" is a scene heading, etc.

Then there are different programs that will convert it to a pretty script
at the very end.

On Tue, May 15, 2018 at 10:20 AM, Giles Turnbull <
giles.turnbull@gmail.com>
wrote:

Hi all,

has anybody used screenwriting programs successfully with NVDA? When I
start my MA in creative writing in October I'd like to take the movie/TV
screenwriting module, but am going to need to use software to handle the
routine screenwriting formatting. I'd appreciate any suggestions on which
software works well with NVDA and any that doesn't.

Grateful for any suggestions ... I know what software is available but do
not know anybody who has used them with a screen reader :)

Giles






Re: I trust this error will be fixed soon.

Brian's Mail list account <bglists@...>
 

It just cuts off after the error and does not either present me with any kind of notion its been downloaded or indeed installed. However if I manually go to the add ons page, download the file to the disc, then run the nvda add on directly, it will install, its as if the hand back to nvda is throwing an error on windows 7.

it closes the dialogue usually as well.
Maybe somebody with more knowledge can figure out why?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Sarah k Alawami" <marrie12@gmail.com>
To: "nvda list list" <nvda@nvda.groups.io>
Sent: Tuesday, May 15, 2018 6:20 PM
Subject: Re: [nvda] I trust this error will be fixed soon.


Hmm. Odd? I just managed to download the update successfully a few days ago. And it did install. I don't know how to read the log, but are you saying in summary that you are having a different experience?

On May 15, 2018, at 9:39 AM, Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io> wrote:

Its At present, its not possible to use the download install link in the add ons menu as it always gives an nvda error as in my recent ticket. its happening on master and next so its probably been there for a while now.
if you download and do this outside nvda, and save a file it then seems to install. Its only the internal option that is broken.

IO - speech.speak (17:31:22.140):
Speaking [LangChangeCommand ('en_GB'), u'\u2022 Author: Tony Malykh']
IO - inputCore.InputManager.executeGesture (17:31:24.213):
Input: kb(desktop):tab
IO - speech.speak (17:31:24.246):
Speaking [LangChangeCommand ('en_GB'), u'stable version', u'link']
IO - inputCore.InputManager.executeGesture (17:31:26.150):
Input: kb(desktop):enter
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (17:31:26.217):
accRole failed: (-2147024809, 'The parameter is incorrect.', (None, None, None, 0, None))
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (17:31:26.549):
accRole failed: (-2147024809, 'The parameter is incorrect.', (None, None, None, 0, None))
DEBUGWARNING - RPC process 1332 (nvda_slave.exe) (17:31:26.612):
Python warning:
C:\Program Files (x86)\NVDA\library.zip\configobj.py:28: DeprecationWarning: The compiler package is deprecated and removed in Python 3.x.
ERROR - RPC process 1332 (nvda_slave.exe) (17:31:26.638):
__main__.main:
slave error
Traceback (most recent call last):
File "nvda_slave.pyw", line 101, in main
ValueError: No such action
IO - inputCore.InputManager.executeGesture (17:31:41.309):
Input: kb(desktop):control+alt+r
IO - speech.speak (17:31:41.384):
Speaking [LangChangeCommand ('en_GB'), u'Taskbar']
IO - speech.speak (17:31:41.424):
Speaking [LangChangeCommand ('en_GB'), u'reboot nvda with log terminal']
IO - speech.speak (17:31:41.426):
Speaking [LangChangeCommand ('en_GB'), u'80 space', u'blank']
INFO - core.main (17:31:41.471):
Exiting

This was an attempt to download sentence navigation add on.
Windows 7 Firefox 57esr.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.



Re: New to NVDS

Bonnie :-)
 

Thanks for the info, Brian. I've got it adjusted so I can hear it better now.

Bonnie

----- Original Message -----
From: Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io>
Reply-To: <nvda@nvda.groups.io>
To: <nvda@nvda.groups.io>
Sent: 5/14/2018 5:59:18 AM
Subject: Re: [nvda] New to NVDS
________________________________________________________________________________

I would also say that as manuals go, the nvda built in one that opens in the
browser is very clear, but if you cannot hear the voice well, its kind of a
pain. First things first, use insert n, go to preferences and synth. Here
you can see what synths are on the system. Choose one you like. then ok out
and go into the voice one in the same way and get it to be the right speed.
If you find Espeak a little bad, then in the voice part you can choose many
variations on the voice which may appeal better. its a very personal thing,
speech on a computer.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Joseph Lee" <joseph.lee22590@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 13, 2018 8:40 PM
Subject: Re: [nvda] New to NVDS


Hi Bonnie,

I see. My own tutorial set can be found at:

http://www.josephsl.net/tutorials

Cheers,

Joseph



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Bonnie :-)
Sent: Sunday, May 13, 2018 12:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] New to NVDS



Thanks Joseph.

In the past, I have used ZoomText, mainly for magnification but did use the
Reader some. I have not purchased the ZoomText version that is compatible
with Win10. Because my eyes can tire easily, especially when looking at the
screen too long, thus I thought I'd try a screen reader.

At this point, the speech rate is a bit fast for my hearing. lol

I could not find any user guide or tutorials.. without paying for them. I
don't mind buying if I'm going to be able to use it but so far, it seems
like something is missing.



Thanks

Bonnie





----- Original Message -----

From: Joseph Lee <joseph.lee22590@gmail.com
<mailto:joseph.lee22590@gmail.com> >

Reply-To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> >

To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> >

Sent: 5/13/2018 1:58:29 PM

Subject: Re: [nvda] New to NVDS


_____


Hi Bonnie and others,

First, welcome to the world of NVDA.

Okay, let’s slow down a lot:

* Based on what you’re telling us, am I correct in thinking that you are
coming from a different screen reader?
* What settings are you interested in changing?
* Have you gone over NVDA’s user guide (online) and various tutorials to
become familiar with NVDA in general?



To others: I think it is vital that we get to know the user first before
suggesting all sorts of settings and intermediate concepts. Without knowing
what the user wants (such as exact settings he or she wishes to change) and
level of familiarity with NVDA, we won’t be able to guide the user to places
where he or she can change appropriate settings. This is the reason why I
said above that we need to slow down a lot before continuing.

P.S. For those coming to NVDACon this year, I’ll touch up on human factors
in my session on providing technical support.

Cheers,

Joseph





From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> <nvda@nvda.groups.io
<mailto:nvda@nvda.groups.io> > On Behalf Of Bonnie :-)
Sent: Sunday, May 13, 2018 10:51 AM
To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
Subject: Re: [nvda] New to NVDS



I find no place to create profiles. And when I click to nvda icon to check
for option, etc, speech says it is opening but nothing comes up on screen.





----- Original Message -----

From: Sky Mundell <skyt@shaw.ca <mailto:skyt@shaw.ca> >

Reply-To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> >

To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> >

Sent: 5/13/2018 1:22:39 PM

Subject: Re: [nvda] New to NVDS


_____


NVDA does have settings for adjusting the speed, voice, etc. if you wanted
to create a speech rate when your reading from top to bottom, you need to do
this using the profiles option in NVDA..



From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
[mailto:nvda@nvda.groups.io] On Behalf Of Bonnie :-)
Sent: Sunday, May 13, 2018 9:39 AM
To: NVDA
Subject: [nvda] New to NVDS



Hi,

I recently downloaded NVDA. I'm wondering if there are any settings or
options for the program. Like, can the speed of the reading (speech) be
adjusted.


Joyonya,
Bonnie


Re: Windows 10 spring creators file explorer extremely unresponsive, or not providing timely feedback?

Roger Stewart
 

I have also noticed that sometimes when in a list of files and folders, there seems to be some sluggishness in reading what is highlighted.  I tried several places and hitting alt + P does absolutely nothing at all. I tried just opening a folder, then I tried searching for file explorer and finally I just tried it on the desktop.  That key combo does nothing anywhere on my machine.  Is there another way to get the responsiveness back?

Thanks.

Roger









On 5/14/2018 4:13 PM, Steve Nutt wrote:

Hi,

 

Just press Alt-P in Explorer, and if it says Checked, then press enter to uncheck it, or just press escape.

 

All the best


Steve

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: 09 May 2018 09:35
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows 10 spring creators file explorer extremely unresponsive, or not providing timely feedback?

 

First, check to see that the preview pane is off.  I don't have Windows 10 and I'm not sure just how you would do this.  Someone else should be able to tell you.  If it already is or if turning it off doesn't solve the problem, try this.

 

Try holding control when moving through the files list and see if that makes moving fast.  When you get to the file you want to select, press the space bar.  If you have moved in the list before, or selected a file in some other way, unselect the file before moving with control space if you are on the file.  Or it may just be easier to press home, then do control space to unselect the first item, it will be the only item selected until you unselected it with control space, as I described.  hold control before moving, move to the file you want, then press the space bar while still holding control, then releasing both keys. 

 

I'm not sure what is causing the slow movement but on my Windows 7 machine, holding control while moving speeds up movement significantly. 

 

You may find that movement is speeded up on your other machine as well. 

 

From: Jacob Kruger

Sent: Wednesday, May 09, 2018 3:01 AM

Subject: [nvda] Windows 10 spring creators file explorer extremely unresponsive, or not providing timely feedback?

 

Firstly, I have two separate machines, both running 64 bit versions of
latest windows 10 spring creators update, and, while my primary work
machine is a lenovo w52 laptop, with 8Gb of RAM, and a standard 500Gb
hard disk drive, my other, secondary machine is a desktop PC, also with
8Gb of RAM, but, it has a 275Gb solid state drive as it's operating
system drive.


The reason I am posting this here is that while the desktop Pc seems to
work pretty responsively with NVDA 2018.1.1, and latest windows 10 app
essentials add-on installed, the lenovo laptop is extremely sluggish at
times when it comes to just trying to browse files using windows own
file explorer, in terms of reading out file names to me as I arrow
around, even allowing me to request read current line output - just says
nothing a lot of the time, etc., etc., and I have tried both the NVDA
next snapshots, and the NVDA master snapshot - that's what am currently
running, but, it doesn't seem to make much of a difference.


This machine seems to work pretty well in all other environments, and,
if I fire up something like an alternative file browser, like free
commander XE, then it responds just like it used to, but, I would prefer
to stick to standard file explorer if possible.


Anyway, in terms of these two machines, the other primary difference is
that, while the lenovo laptop should have higher/better performance in
terms of hardware, besides the solid state drive, since it's my primary
work machine, which I use for forms of web application/software
development, it means it's also a bit more cluttered at the moment in
terms of additional software packages installed, has been running on the
current installation of windows, which was then upgraded to spring
creators recently, a lot longer than the desktop, which I did a clean
installation of windows 1704 on a couple of months ago, etc., etc.


In any case, does anyone have any suggestions about what I could, or
should try out to get the laptop to start responding to file browsing
like it did before the spring creators update, or do I most likely just
need to in fact do a clean install of a new copy of windows 10 spring
creators update on it's own?


And, yes, for example, in file explorer settings, I turned off things
like the preview pane, have switched it over to list view only, etc.,
etc., but anyway.


TIA


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile...but, acceptance is versatile..."




Re: In-Process 15th May

Gary Metzler
 

Hi Quentin,

 

I have the in process set up to come into outlook as an rss feed.  Does it take awhile for it to come into my feed list?  Thanks,

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Tuesday, May 15, 2018 12:17 AM
To: nvda@nvda.groups.io
Subject: [nvda] In-Process 15th May

 

HI everyone,

 

This week's In-Process is out, and it includes some of the goodness you can expect from NVDA 2018.2, plus an update on our first Certified Expert in India and a hat-tip to our Windows Insiders

 

 

#NVDAsr

 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: In-Process 15th May

 

Hi,

Windows OneCore voices is part of Windows 10 only.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kenny Peyattt jr.
Sent: Tuesday, May 15, 2018 11:05 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] In-Process 15th May

 

I am still running windows 7 on my desktop, will I get the one core voices as part of the nvda update, or is it only for windows 10.

Kenny Peyatt jr.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Rosemarie Chavarria
Sent: Tuesday, May 15, 2018 1:43 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] In-Process 15th May

 

Hi, Quentin,

 

Wow, that's neat about the one-core voices being the default voices now. I like e-speakbut the one-core voices sound more natural.

 

Rosemarie

 

 

 

On 5/14/2018 9:16 PM, Quentin Christensen wrote:

HI everyone,

 

This week's In-Process is out, and it includes some of the goodness you can expect from NVDA 2018.2, plus an update on our first Certified Expert in India and a hat-tip to our Windows Insiders

 

 

#NVDAsr

 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

 


adobe digital additions and Braille display

UMIT ERDEM Yigitoglu
 

Hello,
I have been having problems with reading epub books with digital additions for sometime and decided to write about it here. two major issues are:
  sometimes with NVDA and everytime with a braille display at the beginning of a new page I skip the first lines instead my Braille display or nvda repeats the last line of the last page. I need to get one line up and down to solve the problem with my keyboard and it is espetially annoying with braille display when I need to swich between my keyboard and display. I guess the problem is about focus lost. Is there anything I can do to prevent this problem?
Also I need to use my braille display in review mode otherwise it stucks on one line. This is not a big problem for me but I would love to know why is it the case.