Date   

Re: A new member with some questions

Matthew Elliff
 

Thanks for the info guys. What I mean is, say I have a bunch of Excel documents up.  When I tap to one, NVDA it will tell me I’m in the next document, but on the screen, it only shows the one I was last in. It’s not following me in each Excel document.


On May 29, 2018, at 7:08 PM, Gene <gsasner@...> wrote:

Once you move to a ribbon, you tab through the ribbon.  You never use up and down arrow keys.
 
Gene
----- Original Message -----
Sent: Tuesday, May 29, 2018 6:34 PM
Subject: Re: [nvda] A new member with some questions

Hi, I have office 2013. When I hit alt are to go to that part of the ribbon, I only have two options. I don’t see anything about track changes. Is there some other way of navigating these ribbons besides the up and down arrow keys? I’ve never been very good with them. With left and right, I just go back to the other tabs in the ribbon. Do you have any idea about the other questions that I posed? Thanks for your help.


On May 28, 2018, at 9:39 PM, Quentin Christensen <quentin@...> wrote:

Hi Matthew,

Excel has a track changes feature which essentially works the same as the same feature in Word.  That is, once Track changes is turned on, any changes you make (deleting or adding text etc) is highlighted so your colleagues can see what has changed.

Where it is depends on the version of Excel you are using.  If you are using the latest Office 365, the feature has been depreciated in favour of Co-authoring.  If you are using an earlier version of Excel, the feature was in the "Review" ribbon (press alt+r to get to that ribbon)

I must admit, I haven't used co-authoring, so can't comment too much on that, you can find some information from Microsoft here: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b

You can still use Track Changes if you like, but you'll need to add it back to the ribbon.  See: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b for details on how to do that.

Kind regards

Quentin.

On Tue, May 29, 2018 at 7:05 AM, Matthew Elliff <gowrone@...> wrote:
Hi. Ive been using NVDA for several years. I have some questions about
using NVDA with Excell for my work. I need to somehow highlight a cell
so that it will show my sighted coworkers that a change has been made.
Is this done in the ribbon somewhere, or is their a key combination to
do this faster? Also, how can I have NVDA tell me what changes have
occured for formatting, colors ect? Also, how can I have focus from
NVDA follow what's on the screen? I haven't needed to know this
information until now. Any help would be great. Thanks in advance.






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: figured out what was wrong

Jaffar Sidek <jaffar.sidek10@...>
 

Or         you can press f8 to toggle it off and on.  Cheers!

On 5/30/2018 12:01 AM, Rosemarie Chavarria wrote:
Uncheck the message pane in the layout . Go to the view menu with alt V. Arrow down to the layout and hit the right arrow to open it. Arrow down to the message pane and hit enter to uncheck it.


Hope this helps.


Rosemarie


On 5/29/2018 8:57 AM, Brice Mijares wrote:
Rosemary, can you tell me what is annd is not check in layout? I am having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I figured out what happened. The preview pane was on so I went into the view menu and unchecked it. Now thunderbird is working like a charm.


Rosemarie









MeWe

 

Hello guys. Have any of you tried out MeWe at all? If anyone has, I'd like to know of your experiences.


For purposes of this question, I'm speaking of using www.mewe.com with NVDA and any given browser. How did it or does it work for you? My experience with the website haven't been the greatest. For example, I cannot find where to type in a status update.


It is possible I need to be schooled as to something I"m doing wrong. Feel free to do so. Any help with this one is appreciated.


Re: A new member with some questions

Gene
 

Once you move to a ribbon, you tab through the ribbon.  You never use up and down arrow keys.
 
Gene

----- Original Message -----
Sent: Tuesday, May 29, 2018 6:34 PM
Subject: Re: [nvda] A new member with some questions

Hi, I have office 2013. When I hit alt are to go to that part of the ribbon, I only have two options. I don’t see anything about track changes. Is there some other way of navigating these ribbons besides the up and down arrow keys? I’ve never been very good with them. With left and right, I just go back to the other tabs in the ribbon. Do you have any idea about the other questions that I posed? Thanks for your help.


On May 28, 2018, at 9:39 PM, Quentin Christensen <quentin@...> wrote:

Hi Matthew,

Excel has a track changes feature which essentially works the same as the same feature in Word.  That is, once Track changes is turned on, any changes you make (deleting or adding text etc) is highlighted so your colleagues can see what has changed.

Where it is depends on the version of Excel you are using.  If you are using the latest Office 365, the feature has been depreciated in favour of Co-authoring.  If you are using an earlier version of Excel, the feature was in the "Review" ribbon (press alt+r to get to that ribbon)

I must admit, I haven't used co-authoring, so can't comment too much on that, you can find some information from Microsoft here: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b

You can still use Track Changes if you like, but you'll need to add it back to the ribbon.  See: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b for details on how to do that.

Kind regards

Quentin.

On Tue, May 29, 2018 at 7:05 AM, Matthew Elliff <gowrone@...> wrote:
Hi. Ive been using NVDA for several years. I have some questions about
using NVDA with Excell for my work. I need to somehow highlight a cell
so that it will show my sighted coworkers that a change has been made.
Is this done in the ribbon somewhere, or is their a key combination to
do this faster? Also, how can I have NVDA tell me what changes have
occured for formatting, colors ect? Also, how can I have focus from
NVDA follow what's on the screen? I haven't needed to know this
information until now. Any help would be great. Thanks in advance.






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: A new member with some questions

Quentin Christensen
 

It sounds like Microsoft may have depreciated Track Changes in Excel in 2013 perhaps, in which case try the steps in that link I posted, as editing the ribbon works the same in 2013.

For the other questions:
- From NVDA's document formatting options, you can select what changes NVDA will automatically read.  For instance, if you select colour, NVDA will read changes in text colour.  Press NVDA+control+d to open that screen (The NVDA key will be either INSERT or CAPS LOCK depending on your setup).  That screen also has a "Report changes after the cursor" checkbox which you will probably want to have checked for this as well.

- For your question about having NVDA follow the focus on screen, do you mean visually?  Or do you mean you move to a different cell and NVDA isn't following?  For the second, it should follow as you move the focus, so more information might help there.  If you want to visually highlight where NVDA is reading from, there is a "focus highlight" add-on that you might like to try.  You can download the add-on from: https://addons.nvda-project.org/addons/focusHighlight.en.html.  Once you've downloaded it, install it via the NVDA menu (NVDA+N) then Tools (T) then Add-on manager.

Kind regards

Quentin.

On Wed, May 30, 2018 at 9:34 AM, Matthew Elliff <gowrone@...> wrote:
Hi, I have office 2013. When I hit alt are to go to that part of the ribbon, I only have two options. I don’t see anything about track changes. Is there some other way of navigating these ribbons besides the up and down arrow keys? I’ve never been very good with them. With left and right, I just go back to the other tabs in the ribbon. Do you have any idea about the other questions that I posed? Thanks for your help.


On May 28, 2018, at 9:39 PM, Quentin Christensen <quentin@...> wrote:

Hi Matthew,

Excel has a track changes feature which essentially works the same as the same feature in Word.  That is, once Track changes is turned on, any changes you make (deleting or adding text etc) is highlighted so your colleagues can see what has changed.

Where it is depends on the version of Excel you are using.  If you are using the latest Office 365, the feature has been depreciated in favour of Co-authoring.  If you are using an earlier version of Excel, the feature was in the "Review" ribbon (press alt+r to get to that ribbon)

I must admit, I haven't used co-authoring, so can't comment too much on that, you can find some information from Microsoft here: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b

You can still use Track Changes if you like, but you'll need to add it back to the ribbon.  See: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b for details on how to do that.

Kind regards

Quentin.

On Tue, May 29, 2018 at 7:05 AM, Matthew Elliff <gowrone@...> wrote:
Hi. Ive been using NVDA for several years. I have some questions about
using NVDA with Excell for my work. I need to somehow highlight a cell
so that it will show my sighted coworkers that a change has been made.
Is this done in the ribbon somewhere, or is their a key combination to
do this faster? Also, how can I have NVDA tell me what changes have
occured for formatting, colors ect? Also, how can I have focus from
NVDA follow what's on the screen? I haven't needed to know this
information until now. Any help would be great. Thanks in advance.






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: A new member with some questions

Matthew Elliff
 

Hi, I have office 2013. When I hit alt are to go to that part of the ribbon, I only have two options. I don’t see anything about track changes. Is there some other way of navigating these ribbons besides the up and down arrow keys? I’ve never been very good with them. With left and right, I just go back to the other tabs in the ribbon. Do you have any idea about the other questions that I posed? Thanks for your help.


On May 28, 2018, at 9:39 PM, Quentin Christensen <quentin@...> wrote:

Hi Matthew,

Excel has a track changes feature which essentially works the same as the same feature in Word.  That is, once Track changes is turned on, any changes you make (deleting or adding text etc) is highlighted so your colleagues can see what has changed.

Where it is depends on the version of Excel you are using.  If you are using the latest Office 365, the feature has been depreciated in favour of Co-authoring.  If you are using an earlier version of Excel, the feature was in the "Review" ribbon (press alt+r to get to that ribbon)

I must admit, I haven't used co-authoring, so can't comment too much on that, you can find some information from Microsoft here: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b

You can still use Track Changes if you like, but you'll need to add it back to the ribbon.  See: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_excel-mso_other-mso_2016/track-changes-removed-from-review-tab/7da17fa0-ff14-45ab-bfa4-cf880ce9230b for details on how to do that.

Kind regards

Quentin.

On Tue, May 29, 2018 at 7:05 AM, Matthew Elliff <gowrone@...> wrote:
Hi. Ive been using NVDA for several years. I have some questions about
using NVDA with Excell for my work. I need to somehow highlight a cell
so that it will show my sighted coworkers that a change has been made.
Is this done in the ribbon somewhere, or is their a key combination to
do this faster? Also, how can I have NVDA tell me what changes have
occured for formatting, colors ect? Also, how can I have focus from
NVDA follow what's on the screen? I haven't needed to know this
information until now. Any help would be great. Thanks in advance.






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: contextual help in NVDA setting panels

Gene
 

I am unaware of any feature in NVDA that will do this.  something that can be turned on and off certainly won't.  A feature like this provides information about a specific control you are on and it is far more information than you would want as a matter of routine.  I don't think that NVDA has such a feature but I may be wrong.  But it will be a command, not a general setting.
 
Gene

----- Original Message -----
From: zahra
Sent: Tuesday, May 29, 2018 4:03 PM
Subject: Re: [nvda] contextual help in NVDA setting panels

how about object discription?
did you try this feature too?
i did not mention it, because it is checked by default.

On 5/30/18, Cohn, Jonathan <jcohn@...> wrote:
> Hello Zahra,
>
> This did not work for me at least not in the Snapshot build with the new
> unified preference panes On Windows 10, or with NVDA 2018.1 on Windows 7.
> I turned on tooltip objects and made sure that help balloon was also
> checked.
>
>
> I was looking at the Preference pane for Input Composition and did not
> receive any speech describing what the fields use was as I hit tab key to
> move focus.
>
> Thanks,
>
> Jonathan
>
>
>  5/29/18, 1:48 PM, "nvda@nvda.groups.io on behalf of zahra"
> <nvda@nvda.groups.io on behalf of nasrinkhaksar3@...> wrote:
>
>     hi.
>     go to the preferences and object presentation.
>     and check Report tooltips with space and press enter on okay button.
>     with enabling this option, you even dont need to press f1!
>     nvda announces discription of every item automaticly!
>     hope that help, God bless you all!
>
>     On 5/29/18, Cohn, Jonathan <jcohn@...> wrote:
>     > Hello,
>     >
>     > One feature I used to like about WindowEyes was the ability to type F1
> while
>     > navigating through the WindowEyes panel and having a two or three
> sentence
>     > prase describing in more details the currently focused item.
>     >
>     > Does NVDA have functionality like this that I missed?
>     >
>     > Thanks,
>     >
>     > Jonathan Cohn
>     >
>     >
>
>
>     --
>     By God,
>     were I given all the seven heavens
>     with all they contain
>     in order that
>     I may disobey God
>     by depriving an ant
>     from the husk of a grain of barley,
>     I would not do it.
>     imam ali
>
>
>
>
>
>
>
>
>


--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali



Re: contextual help in NVDA setting panels

Gene
 

Tooltips only read tool tips, little bits of information that may come up when you select something.  If you select something, such as a program control or an item on the desktop, if you have tool tips set to be announced, you will hear some information.  If I want more information and I think tool tips in a program or on the desktop or in file explorer might give me more, I turn announcement on.  also, using mouse movement commands in NVDA may cause a tool tip to come up when you move the mouse to something either from the keyboard or a phhysical mouse.  But tool tips have nothing to do with what you are asking about. 
 
At times, if there are unlabeled controls or icons in a program, having tool tip announcement on can tell you important information however you move to these items. 
 
I usually have them off because I already know what I'm doing in familiar programs or interfaces such as file explorer, and I don't want unnecessary speech clutter.  But if I was working with a program where I didn't or couldn't tell what something is except for a tool tip, I would have announcement on. 
 
GeneWhat you are asking about is information such as, this is an edit field.  I don't know just what Window-eyes tells you.  Tooltips never give that kind of information. 

----- Original Message -----
Sent: Tuesday, May 29, 2018 3:35 PM
Subject: Re: [nvda] contextual help in NVDA setting panels

Hello Zahra,

This did not work for me at least not in the Snapshot build with the new unified preference panes On Windows 10, or with NVDA 2018.1 on Windows 7.
I turned on tooltip objects and made sure that help balloon was also checked.


I was looking at the Preference pane for Input Composition and did not receive any speech describing what the fields use was as I hit tab key to move focus.

Thanks,

Jonathan


 5/29/18, 1:48 PM, "nvda@nvda.groups.io on behalf of zahra" <nvda@nvda.groups.io on behalf of nasrinkhaksar3@...> wrote:

    hi.
    go to the preferences and object presentation.
    and check Report tooltips with space and press enter on okay button.
    with enabling this option, you even dont need to press f1!
    nvda announces discription of every item automaticly!
    hope that help, God bless you all!
   
    On 5/29/18, Cohn, Jonathan <jcohn@...> wrote:
    > Hello,
    >
    > One feature I used to like about WindowEyes was the ability to type F1 while
    > navigating through the WindowEyes panel and having a two or three sentence
    > prase describing in more details the currently focused item.
    >
    > Does NVDA have functionality like this that I missed?
    >
    > Thanks,
    >
    > Jonathan Cohn
    >
    >
   
   
    --
    By God,
    were I given all the seven heavens
    with all they contain
    in order that
    I may disobey God
    by depriving an ant
    from the husk of a grain of barley,
    I would not do it.
    imam ali
   
   
   
   





Re: contextual help in NVDA setting panels

 

how about object discription?
did you try this feature too?
i did not mention it, because it is checked by default.

On 5/30/18, Cohn, Jonathan <jcohn@...> wrote:
Hello Zahra,

This did not work for me at least not in the Snapshot build with the new
unified preference panes On Windows 10, or with NVDA 2018.1 on Windows 7.
I turned on tooltip objects and made sure that help balloon was also
checked.


I was looking at the Preference pane for Input Composition and did not
receive any speech describing what the fields use was as I hit tab key to
move focus.

Thanks,

Jonathan


5/29/18, 1:48 PM, "nvda@nvda.groups.io on behalf of zahra"
<nvda@nvda.groups.io on behalf of nasrinkhaksar3@...> wrote:

hi.
go to the preferences and object presentation.
and check Report tooltips with space and press enter on okay button.
with enabling this option, you even dont need to press f1!
nvda announces discription of every item automaticly!
hope that help, God bless you all!

On 5/29/18, Cohn, Jonathan <jcohn@...> wrote:
> Hello,
>
> One feature I used to like about WindowEyes was the ability to type F1
while
> navigating through the WindowEyes panel and having a two or three
sentence
> prase describing in more details the currently focused item.
>
> Does NVDA have functionality like this that I missed?
>
> Thanks,
>
> Jonathan Cohn
>
>


--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali








--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: figured out what was wrong

Gene New Zealand <hurrikennyandopo@...>
 

hi


In thunder bird it is options then display tab then advanced tab and it
is under that section where you can make it longer or shorter to display
when message read.


Gene nz

On 5/30/2018 4:21 AM, Jackie wrote:
I think TBird also has an option where you can specify the amount of
time that a msg can remain in the preview pane & not be considered
unread, including never mark as unread while in that pane, if memory
serves--& warning--it may not.

On 5/29/18, Rosemarie Chavarria <knitqueen2007@...> wrote:
Uncheck the message pane in the layout . Go to the view menu with alt V.
Arrow down to the layout and hit the right arrow to open it. Arrow down
to the message pane and hit enter to uncheck it.


Hope this helps.


Rosemarie


On 5/29/2018 8:57 AM, Brice Mijares wrote:
Rosemary, can you tell me what is annd is not check in layout? I am
having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I figured out what happened. The preview pane was on so I went into
the view menu and unchecked it. Now thunderbird is working like a charm.


Rosemarie









Re: contextual help in NVDA setting panels

Jonathan COHN
 

Hello Zahra,

This did not work for me at least not in the Snapshot build with the new unified preference panes On Windows 10, or with NVDA 2018.1 on Windows 7.
I turned on tooltip objects and made sure that help balloon was also checked.


I was looking at the Preference pane for Input Composition and did not receive any speech describing what the fields use was as I hit tab key to move focus.

Thanks,

Jonathan


5/29/18, 1:48 PM, "nvda@nvda.groups.io on behalf of zahra" <nvda@nvda.groups.io on behalf of nasrinkhaksar3@...> wrote:

hi.
go to the preferences and object presentation.
and check Report tooltips with space and press enter on okay button.
with enabling this option, you even dont need to press f1!
nvda announces discription of every item automaticly!
hope that help, God bless you all!

On 5/29/18, Cohn, Jonathan <jcohn@...> wrote:
> Hello,
>
> One feature I used to like about WindowEyes was the ability to type F1 while
> navigating through the WindowEyes panel and having a two or three sentence
> prase describing in more details the currently focused item.
>
> Does NVDA have functionality like this that I missed?
>
> Thanks,
>
> Jonathan Cohn
>
>


--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: contextual help in NVDA setting panels

 

hi.
go to the preferences and object presentation.
and check Report tooltips with space and press enter on okay button.
with enabling this option, you even dont need to press f1!
nvda announces discription of every item automaticly!
hope that help, God bless you all!

On 5/29/18, Cohn, Jonathan <jcohn@...> wrote:
Hello,

One feature I used to like about WindowEyes was the ability to type F1 while
navigating through the WindowEyes panel and having a two or three sentence
prase describing in more details the currently focused item.

Does NVDA have functionality like this that I missed?

Thanks,

Jonathan Cohn

--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: figured out what was wrong

Rosemarie Chavarria
 

I hadn't thought of that. I also figured that I didn't have "unread" checked. I think that's why new messages were being marked as unread. Now everything is working fine.

On 5/29/2018 9:21 AM, Jackie wrote:
I think TBird also has an option where you can specify the amount of
time that a msg can remain in the preview pane & not be considered
unread, including never mark as unread while in that pane, if memory
serves--& warning--it may not.

On 5/29/18, Rosemarie Chavarria <knitqueen2007@...> wrote:
Uncheck the message pane in the layout . Go to the view menu with alt V.
Arrow down to the layout and hit the right arrow to open it. Arrow down
to the message pane and hit enter to uncheck it.


Hope this helps.


Rosemarie


On 5/29/2018 8:57 AM, Brice Mijares wrote:
Rosemary, can you tell me what is annd is not check in layout? I am
having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I figured out what happened. The preview pane was on so I went into
the view menu and unchecked it. Now thunderbird is working like a charm.


Rosemarie









contextual help in NVDA setting panels

Jonathan COHN
 

Hello,

 

One feature I used to like about WindowEyes was the ability to type F1 while navigating through the WindowEyes panel and having a two or three sentence prase describing in more details the currently focused item.

 

Does NVDA have functionality like this that I missed?

 

Thanks,

 

Jonathan Cohn

 


Re: figured out what was wrong

Brice Mijares
 

Okay, thanks for the info.

On 5/29/2018 9:01 AM, Rosemarie Chavarria wrote:
Uncheck the message pane in the layout . Go to the view menu with alt V. Arrow down to the layout and hit the right arrow to open it. Arrow down to the message pane and hit enter to uncheck it.
Hope this helps.
Rosemarie
On 5/29/2018 8:57 AM, Brice Mijares wrote:
Rosemary, can you tell me what is annd is not check in layout? I am having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I figured out what happened. The preview pane was on so I went into the view menu and unchecked it. Now thunderbird is working like a charm.


Rosemarie








Re: Does this page sound weird to anybody else?

Jonathan COHN
 

Hello,

 

Weebly.com is one of those sites that auto-creates web sites with drag and drop actions. I believe in general these quick build web sites have a tendency to not follow WCAG standards. There is going to be a conference in the Washington DC area in October where one of the points being discussed is how to improve the accessibility of this type of site.

 

 

 

From: <nvda@nvda.groups.io> on behalf of Ryan Mann <rmann0581@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Tuesday, May 29, 2018 at 10:44 AM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: [nvda] Does this page sound weird to anybody else?

 

When I go to the below page with NVDA, to me it sounds like just parts of words are read.  In the middle of some words, symbols such as “dollar” and “percent” are being read.

I’ve tried it with Internet Explorer and Firefox.  The URL is https://saintleouniversityparents.weebly.com/my-parent-access.html.


Re: NVDA no longer gives feedback on copy, cut and paste as before

Jonathan COHN
 

Brian,

Do you find the slowness / bugs only with Office products? I believe that Office does not use the standard clipboard until one has switched out of the Office program. I remember reading about an Office clipboard that keeps a history of clips and has some additional functionality over the standard Windows clipboard.

If this is the case, then perhaps Office has some event notifications about its internal board that could be used to improve performance in Office. Did you talk with the add-on developer about issues in your versions of Office?


Best Wishes,

Jonathan


Re: figured out what was wrong

Jackie
 

I think TBird also has an option where you can specify the amount of
time that a msg can remain in the preview pane & not be considered
unread, including never mark as unread while in that pane, if memory
serves--& warning--it may not.

On 5/29/18, Rosemarie Chavarria <knitqueen2007@...> wrote:
Uncheck the message pane in the layout . Go to the view menu with alt V.
Arrow down to the layout and hit the right arrow to open it. Arrow down
to the message pane and hit enter to uncheck it.


Hope this helps.


Rosemarie


On 5/29/2018 8:57 AM, Brice Mijares wrote:
Rosemary, can you tell me what is annd is not check in layout? I am
having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I figured out what happened. The preview pane was on so I went into
the view menu and unchecked it. Now thunderbird is working like a charm.


Rosemarie










--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


Re: figured out what was wrong

Rosemarie Chavarria
 

Uncheck the message pane in the layout . Go to the view menu with alt V. Arrow down to the layout and hit the right arrow to open it. Arrow down to the message pane and hit enter to uncheck it.


Hope this helps.


Rosemarie

On 5/29/2018 8:57 AM, Brice Mijares wrote:
Rosemary, can you tell me what is annd is not check in layout? I am having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I figured out what happened. The preview pane was on so I went into the view menu and unchecked it. Now thunderbird is working like a charm.


Rosemarie







Re: figured out what was wrong

Brice Mijares
 

Rosemary, can you tell me what is annd is not check in layout? I am having the same problem.

On 5/29/2018 8:26 AM, Rosemarie Chavarria wrote:
Hi, everyone,
I figured out what happened. The preview pane was on so I went into the view menu and unchecked it. Now thunderbird is working like a charm.
Rosemarie

60561 - 60580 of 101097