Date   

messages disappearing from my folders in outlook

Rosemarie Chavarria
 

Hi, everyone,

 

I don't know what happened to some of my messages that I had from other lists that I'm on. They just suddenly disappeared. I know I didn't delete them. I tried looking in the junk folder but they're not there. Is there something else I can do?

 

Thanks for your help in advance.

 

Rosemarie

 

 


NVDA And Avast Free Anti Virus

Ron Canazzi
 

Hi Group,

Is there any add on or perhaps some sort of technique for using the main interface or in particular, the registration panel in the Avast Free Anti Virus program?

I used to be able to enter the registration information every year for the free upgrade, but something may have changed either in NVDA or Avast to make this impossible for me this year.

Any help would be greatly appreciated.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: recommendation for ms office equivalent

Ashley Wayne
 

I have had good success with open office.  It has a standard menu system, instead of ribbons, which I personally like.


On 6/16/2018 7:52 PM, Craig wrote:

Hi.

 

Recommendation sorted for an office software that can access ms office files and obviously nvda can access as well.

 

Thanks in advance.

 

 

 

Cheers Craig

 

Craig& his Guide dog Winnie

 

 

Far beyond the Shrouded hours of dawn

Through the mist Of daybreak I was borne

But the day was Clouded still by night

Leaving me in the land of no light

 

 

Title of song: Echoes In The Dark

Performed by: Uriah Heep - Songwriters: Hensley, Ken

 



recommendation for ms office equivalent

Craig
 

Hi.

 

Recommendation sorted for an office software that can access ms office files and obviously nvda can access as well.

 

Thanks in advance.

 

 

 

Cheers Craig

 

Craig& his Guide dog Winnie

 

 

Far beyond the Shrouded hours of dawn

Through the mist Of daybreak I was borne

But the day was Clouded still by night

Leaving me in the land of no light

 

 

Title of song: Echoes In The Dark

Performed by: Uriah Heep - Songwriters: Hensley, Ken

 


Re: facebook ??

 

Hi Danni,
Could you save the pic?
Em 16/06/2018 11:41, Danni escreveu:

Thanks was using i/e because firefox wasn't letting me so I'll try that way thanks!
�
----- Original Message -----
Sent: Saturday, June 16, 2018 12:07 AM
Subject: Re: [nvda] facebook ??

Hi, I'm back.
Well, first of all I need to know some things, such as which browser are you using when you tried to save the pic.
But assuming you're using Firefox, that's what I use...
Before downloading the pic you must choose to see it in a full size. You'll be able to find it tabing in the page that opens with the comments and reactions about the� post.
So, after you're in full size pic screen, you should be able to save it as a pic on itself.
Em 16/06/2018 01:37, Danni escreveu:
when I try a right click and save target as it calls it a document not a pic am not sure what changed to cause this but figured I'd ask?
�
----- Original Message -----
Sent: Friday, June 15, 2018 6:45 PM
Subject: Re: [nvda] facebook ??

Hi,
Exactly what kind of trouble are you having?

Em 15/06/2018 19:44, Danni escreveu:
�
I have started having trouble taking pictures from people's facebook pages and am wondering if by chance there is an addon or something that can help?
�
when I try a right click and save target as it calls it a document not a pic am not sure what changed to cause this but figured I'd ask?
�




Re: Administrative privileges.

Sarah k Alawami
 

Nice nice. Yeah you should have gotten that before, why you did not I dunno, maybe just a compuer glitch somewhare.

On Jun 16, 2018, at 4:21 PM, Nevzat Adil <nevzatadil@...> wrote:

Anyway, looks like I solved the problem. When I assigned the shortcut
key I pressed enter and it gave me the same error message saying I
needed to have administrative permission and asked me to continue to
fix the problem. So I pressed continue and again went through the
procedure of assigning the shortcut key for JAWS. I type j and pressed
enter and it went through. I unloaded JAWS and restarted it by using
the shortcut combination and to my surprise it worked!
Nevzat

On 6/16/18, Sarah k Alawami <marrie12@...> wrote:
It's basically a linux shell you can install inside windows. I use this all
the time. I personally use ubuntu but you can use what ever microsoft has to
offer. From ther eyou can do any unix and or linux commands inside our
windows pc. Pretty neat. Tha'ts why I suggested you chmod that shortcut to
755 then chone that to your user name what ever that is in windows 10, if
that can even be done.

On Jun 16, 2018, at 3:32 PM, Nevzat Adil <nevzatadil@...> wrote:

Chris, I installed it from a disk. But recently I noticed the shortcut
no longer was there. After I updated Windows 10 the other day, K1000
reverted to demo version. Now I have to update K1000 to version 14. I
was told it was due to an update to Windows 10. I wonder if it did
affect Jaws shortcut, as well.  My duxbury software also had a glitch,
but somehow I fixed that by going to control panel and user account.

Sarah, I have no idea what sublinux system
is.
Nevzat



On 6/16/18, Chris Mullins <cjmullins29@...
<mailto:cjmullins29@...>> wrote:

Nevzat
Did you install Jaws yourself using the same account?

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 16 June 2018 20:18
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

It used to but not anymore; that's why I am trying to redo it but I
have no administrator permission according to the message I get.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Nevzat
If that's the case, it should already have the shortcut key set-up.
Does
jaws start when you press control+alt+j?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 16 June 2018 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, the icon was created automatically when I downloaded it.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
If the desktop icon was correctly created, the "Start in" field will
be
filled in already.  You just need to tab to the next field which is
the
shortcut key, then just press the letter you want to use (ctrl+alt
will
be
added by Windows), tab to OK and press enter.

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Gene
New
Zealand
Sent: 15 June 2018 21:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Hi


If it is just asigning the shortcut after you have gone into the
properties tab down to shortcut and asign one.


I think you can only use alt + ctrl + a letter like J for jaws or
another letter.


Make sure you save the settings.


Gene nz




On 6/16/2018 3:03 AM, Nevzat Adil wrote:
Hi all,

I solved the problem by going to Control Panel and User accounts. But
my problem with assigning a shortcut key to an icon on the desktop
still persists. I press alt+enter to go to properties for the
shortcut
I have a problem what to write in the "start in" edit field. The
desktop icon in question is JAWS.
I thank you all for your responses.
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
Only an administrator account can change a standard account to an
administrator account.  That is why I asked if there are any other
accounts
on the computer.  If there are no other accounts, let me know and
I'll
give
you details of a different method of solving the problem.

You can check if there are any other accounts by pressing Windows+i
to
open
Settings, then press enter on Accounts.  Tab to the list of topics
and
arrow
down to Family and other people and press enter.  Tab to the list of
other
account names and types on the machine and see if there is a user
account
with administrator privilidges.  If there is, get the person to log
on
using
that account, then they could use this settings process to edit your
account
details and change it from standard to administrator.

Cheers
Chris






 -----Original Message-----
From: nvda@nvda.groups.io[mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 14 June 2018 20:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, yes, I get an error message saying I need to have
administrator
permission. My operating system is Windows 10. I believe I have
standard user account. I tried to change user account and typed my
name and I was told that user account already exists. If I type
administrator would it change to that?
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
I would have thought you should be able to assign shortcuts as
these
are
personal to your account and don't affect other users, so should
not
require
admin priviledges.  If you are using a work computer it maybe that
a
corporate group policy is in effect which denies the capability but
this
would be unlikely.

As Brian asked, is your user account standard or administrator?
Could
you
give us more information, such as operating system being used, work
or
home
computer, is yours the only account on the computer etc.

The process I would use to assign a shortcut key is:
Select desktop icon
Press alt+enter to open properties
Tab to the shortcut key control and press the shortcut letter
alone,
the
CTRL+Alt part of the command is added automatically by Windows
Tab to OK and press enter.

If you get an error after pressing OK, please give full details

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io[mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 13 June 2018 19:58
To: nvda@groups.io
Subject: [nvda] Administrative privileges.

Hi Group,

I am trying to assign shortcut keys to icons on the desktop, but it
won't go through as I am told I have no administrative privileges.
Using NVDA how do I get administrative privilege on my computer?
Your response will be greatly appreciated.
Nevzat


















































Re: Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

Kerryn Gunness
 

thanks joseph lee
 
 

----- Original Message -----
From: Joseph Lee
Sent: Saturday, June 16, 2018 3:49 PM
Subject: Re: [nvda] Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

Hi,

Yes, it’ll be archived.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@...> On Behalf Of Kerryn Gunness via Groups.Io
Sent: Saturday, June 16, 2018 12:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

 

nice

but would the audio be available for this session?

i cannot attend, hense the reason i am asking

----- Original Message -----

From: Joseph Lee

Sent: Saturday, June 16, 2018 12:54 PM

Subject: [nvda] Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

 

Hi all,

 

I’d like to invite you to the first of the three online seminars on Introduction to NVDA Technical Support. Due to financial and other reasons, we’ll be using TeamTalk 5.

 

Seminar details:

 

  • Date: June 23, 2018 at 17:-00 UTC (10 AM Pacific, 1 PM Eastern and elsewhere)
  • Location: josephsl.net TeamTalk server (server is josephsl.net, 10333 for both TCP and UDP)
  • Duration: about an hour

 

Topics to be covered:

  • What is technical support
  • Basic NVDA concepts useful for tech support purposes, such as object navigation, focus versus review cursor overview and so on

 

Things to do before coming to the seminar:

  • Read NVDA user guide
  • Become familiar with NVDA commands and features, especially 2018.2 features
  • Come up with at least three questions users may have about NVDA concepts and commands that may show up in tech support sessions

 

Hope to see you all next week.

Cheers,

Joseph


Re: Administrative privileges.

 

Anyway, looks like I solved the problem. When I assigned the shortcut
key I pressed enter and it gave me the same error message saying I
needed to have administrative permission and asked me to continue to
fix the problem. So I pressed continue and again went through the
procedure of assigning the shortcut key for JAWS. I type j and pressed
enter and it went through. I unloaded JAWS and restarted it by using
the shortcut combination and to my surprise it worked!
Nevzat

On 6/16/18, Sarah k Alawami <marrie12@...> wrote:
It's basically a linux shell you can install inside windows. I use this all
the time. I personally use ubuntu but you can use what ever microsoft has to
offer. From ther eyou can do any unix and or linux commands inside our
windows pc. Pretty neat. Tha'ts why I suggested you chmod that shortcut to
755 then chone that to your user name what ever that is in windows 10, if
that can even be done.

On Jun 16, 2018, at 3:32 PM, Nevzat Adil <@Nev> wrote:

Chris, I installed it from a disk. But recently I noticed the shortcut
no longer was there. After I updated Windows 10 the other day, K1000
reverted to demo version. Now I have to update K1000 to version 14. I
was told it was due to an update to Windows 10. I wonder if it did
affect Jaws shortcut, as well. My duxbury software also had a glitch,
but somehow I fixed that by going to control panel and user account.

Sarah, I have no idea what sublinux system
is.
Nevzat



On 6/16/18, Chris Mullins <cjmullins29@...
<mailto:cjmullins29@...>> wrote:

Nevzat
Did you install Jaws yourself using the same account?

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 16 June 2018 20:18
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

It used to but not anymore; that's why I am trying to redo it but I
have no administrator permission according to the message I get.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Nevzat
If that's the case, it should already have the shortcut key set-up.
Does
jaws start when you press control+alt+j?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 16 June 2018 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, the icon was created automatically when I downloaded it.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
If the desktop icon was correctly created, the "Start in" field will
be
filled in already. You just need to tab to the next field which is
the
shortcut key, then just press the letter you want to use (ctrl+alt
will
be
added by Windows), tab to OK and press enter.

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Gene
New
Zealand
Sent: 15 June 2018 21:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Hi


If it is just asigning the shortcut after you have gone into the
properties tab down to shortcut and asign one.


I think you can only use alt + ctrl + a letter like J for jaws or
another letter.


Make sure you save the settings.


Gene nz




On 6/16/2018 3:03 AM, Nevzat Adil wrote:
Hi all,

I solved the problem by going to Control Panel and User accounts. But
my problem with assigning a shortcut key to an icon on the desktop
still persists. I press alt+enter to go to properties for the
shortcut
I have a problem what to write in the "start in" edit field. The
desktop icon in question is JAWS.
I thank you all for your responses.
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
Only an administrator account can change a standard account to an
administrator account. That is why I asked if there are any other
accounts
on the computer. If there are no other accounts, let me know and
I'll
give
you details of a different method of solving the problem.

You can check if there are any other accounts by pressing Windows+i
to
open
Settings, then press enter on Accounts. Tab to the list of topics
and
arrow
down to Family and other people and press enter. Tab to the list of
other
account names and types on the machine and see if there is a user
account
with administrator privilidges. If there is, get the person to log
on
using
that account, then they could use this settings process to edit your
account
details and change it from standard to administrator.

Cheers
Chris






-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 14 June 2018 20:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, yes, I get an error message saying I need to have
administrator
permission. My operating system is Windows 10. I believe I have
standard user account. I tried to change user account and typed my
name and I was told that user account already exists. If I type
administrator would it change to that?
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
I would have thought you should be able to assign shortcuts as
these
are
personal to your account and don't affect other users, so should
not
require
admin priviledges. If you are using a work computer it maybe that
a
corporate group policy is in effect which denies the capability but
this
would be unlikely.

As Brian asked, is your user account standard or administrator?
Could
you
give us more information, such as operating system being used, work
or
home
computer, is yours the only account on the computer etc.

The process I would use to assign a shortcut key is:
Select desktop icon
Press alt+enter to open properties
Tab to the shortcut key control and press the shortcut letter
alone,
the
CTRL+Alt part of the command is added automatically by Windows
Tab to OK and press enter.

If you get an error after pressing OK, please give full details

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 13 June 2018 19:58
To: nvda@groups.io
Subject: [nvda] Administrative privileges.

Hi Group,

I am trying to assign shortcut keys to icons on the desktop, but it
won't go through as I am told I have no administrative privileges.
Using NVDA how do I get administrative privilege on my computer?
Your response will be greatly appreciated.
Nevzat

































Re: NVDA was working fine until this morning when I tried to update

Gene New Zealand <hurrikennyandopo@...>
 

Hi


For a complete uninstall of nvda from the computer in cases i might use narrator .


it will depend on your operating system what the add/remove section is called for programs.


You will need to locate nvda in that list and uninstall it .


Then close that screen with the alt key + f4 key.


Next use the windows key + letter R to bring up the run dialogue and type in the following %appdata% then press the enter key.


it will give you a list of folders i think it is called in the roaming folder.


Locate the nvda folder and delete it


Close that screen with the alt key + f4 key.


But before you do that make sure you have a good working copy of nvda that you can use. Just to be on the safe side i usually grab the latest copy from nvaccess.


After the steps have been done you can then reinstall nvda to your computer.


I do have directions some where on my website that says what to do.


Gene nz



On 6/17/2018 12:55 AM, Daniel Hawkins wrote:
My computer at work have this problem. For the past year, everytime there is a update, NVDA crashes. Then either I use Narrator to reinstall NVDA or I use JAWS to reinstall. But before I do that, i uninstall NVDA under Apps and features in Windows 10.

Someone have mentioned that when you uninstall NVDA and uninstall it’s files, how would you go about doing that? When i reinstall NVDA, all my addons and settings are still there. So, i know it is not a complete wipe. If there is any directions to completely remove NVDA, I would love to know how to do it. Thanks!
Daniel Hawkins



On Jun 15, 2018, at 1:54 AM, Brian's Mail list account via Groups.Io <bglists@...> wrote:

Yes I finally managed to get this effect you described. It seems that it throws an error at the time when no nvda is actually able to run because of an error screen, so it seems like all is quiet. I did a button  on the computer quick tap to let it shut down gracefully. Then when it cam up with a dong noise as obviously nvda was not installed fully, I ran a portable copy from another folder, then I manually removed the exe files from the nvda folder in program files (x86) and reran the update file and  boom all is well.
As has been said before often if there is something on the machine which screws up an install, say a file that needs to be deleted but is not from an older copy, then all sorts of random things happen.
Its seldom the end of the world. Moral, when you are happy with a working version of nvda. Create a portable version in another folder on your hard drive, go there with explorer and create a shortcut to the  main exe file or use a batch file in that folder and make a shortcut to that. I published my batch file a day or so back as it makes sure any running copy of nvda shuts down before running it again from the portable version.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Joshua Hendrickson" <louvins@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, June 14, 2018 11:31 PM
Subject: Re: [nvda] NVDA was working fine until this morning when I tried to update


I was able to get help getting my downloaded copy of NVDA installed.
Things seem to be working ok now.  Thanks to all for their
suggestions.

On 6/14/18, Gene New Zealand <hurrikennyandopo@...> wrote:
Hi Joshua


Afteryou downloaded a copy of nvda then clicked on it to install it to
your pc was it after it said it was installing it went quiet? I can not
remember if nvda says wait or in the latest versions there is no sound
until it is installed then you will hear nvda start up again and it is
ready to use.


I wonder if a UAC screen came up? and was not in focus for nvda to read
out? In this case use the alt key + letter Y if it comes up.

If it is not in focus use the alt + tab key to bring it into focus.


Your anti virus could be blocking it but would if it was me reinstall
nvda again.


If you want to see what is happening and nvda is not speaking some times
also using narrator to see what is happening helps. but if nvda and
narrator are running togeher for 2 long it can drive you a little crazy
but once nvda is installed you can turn off narrator.


It just depends where the speech stops. Are you still getting sound from
the computer? or do you have 2 sound cards?


Gene nz





On 6/15/2018 2:28 AM, Joshua Hendrickson wrote:
Hi to all.  This morning when I tried to update my NVDA something went
wrong I think.  I heard the program shut off, then turn on again and
when I thought it was installing I lost all sound.  I downloaded the
newest 2018 version of NVDA from the website and tried to install it.
Well, I had other speech on and my speech just stopped.  I don't know
what I should do.  I'd rather not go back to jaws, but I don't know
why my NVDA isn't working correctly.  I'm afraid to try and reinstall
NVDA again.








-- 
Joshua Hendrickson

Joshua Hendrickson






Re: Read Allowed in Edge

Gary Metzler
 

Thank you for this info.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Lino Morales
Sent: Saturday, June 16, 2018 3:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Read Allowed in Edge

 

To Brian first of all do you really have to put out instructions the average user can’t follow sir? Not everybody is a techie freak like you sir. To Gary. To change the voices in Red Aloud in Edge hit alt X then press enter on Read Aloud. Next tab to the button that says change voices. Their how simple is that?

 

Sent from Mail for Windows 10

 


Re: Administrative privileges.

Sarah k Alawami
 

It's basically a linux shell you can install inside windows. I use this all the time. I personally use ubuntu but you can use what ever microsoft has to offer. From ther eyou can do any unix and or linux commands inside our windows pc. Pretty neat. Tha'ts why I suggested you chmod that shortcut to 755 then chone that to your user name what ever that is in windows 10, if that can even be done.

On Jun 16, 2018, at 3:32 PM, Nevzat Adil <nevzatadil@...> wrote:

Chris, I installed it from a disk. But recently I noticed the shortcut
no longer was there. After I updated Windows 10 the other day, K1000
reverted to demo version. Now I have to update K1000 to version 14. I
was told it was due to an update to Windows 10. I wonder if it did
affect Jaws shortcut, as well.  My duxbury software also had a glitch,
but somehow I fixed that by going to control panel and user account.

Sarah, I have no idea what sublinux system
is.
Nevzat



On 6/16/18, Chris Mullins <cjmullins29@...> wrote:

Nevzat
Did you install Jaws yourself using the same account?

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Nevzat
Adil
Sent: 16 June 2018 20:18
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

It used to but not anymore; that's why I am trying to redo it but I
have no administrator permission according to the message I get.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Nevzat
If that's the case, it should already have the shortcut key set-up. Does
jaws start when you press control+alt+j?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 16 June 2018 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, the icon was created automatically when I downloaded it.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
If the desktop icon was correctly created, the "Start in" field will be
filled in already.  You just need to tab to the next field which is the
shortcut key, then just press the letter you want to use (ctrl+alt will
be
added by Windows), tab to OK and press enter.

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
New
Zealand
Sent: 15 June 2018 21:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Hi


If it is just asigning the shortcut after you have gone into the
properties tab down to shortcut and asign one.


I think you can only use alt + ctrl + a letter like J for jaws or
another letter.


Make sure you save the settings.


Gene nz




On 6/16/2018 3:03 AM, Nevzat Adil wrote:
Hi all,

I solved the problem by going to Control Panel and User accounts. But
my problem with assigning a shortcut key to an icon on the desktop
still persists. I press alt+enter to go to properties for the shortcut
I have a problem what to write in the "start in" edit field. The
desktop icon in question is JAWS.
I thank you all for your responses.
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
Only an administrator account can change a standard account to an
administrator account.  That is why I asked if there are any other
accounts
on the computer.  If there are no other accounts, let me know and I'll
give
you details of a different method of solving the problem.

You can check if there are any other accounts by pressing Windows+i to
open
Settings, then press enter on Accounts.  Tab to the list of topics and
arrow
down to Family and other people and press enter.  Tab to the list of
other
account names and types on the machine and see if there is a user
account
with administrator privilidges.  If there is, get the person to log on
using
that account, then they could use this settings process to edit your
account
details and change it from standard to administrator.

Cheers
Chris






  -----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 14 June 2018 20:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, yes, I get an error message saying I need to have administrator
permission. My operating system is Windows 10. I believe I have
standard user account. I tried to change user account and typed my
name and I was told that user account already exists. If I type
administrator would it change to that?
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
I would have thought you should be able to assign shortcuts as these
are
personal to your account and don't affect other users, so should not
require
admin priviledges.  If you are using a work computer it maybe that a
corporate group policy is in effect which denies the capability but
this
would be unlikely.

As Brian asked, is your user account standard or administrator?
Could
you
give us more information, such as operating system being used, work
or
home
computer, is yours the only account on the computer etc.

The process I would use to assign a shortcut key is:
Select desktop icon
Press alt+enter to open properties
Tab to the shortcut key control and press the shortcut letter alone,
the
CTRL+Alt part of the command is added automatically by Windows
Tab to OK and press enter.

If you get an error after pressing OK, please give full details

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 13 June 2018 19:58
To: nvda@groups.io
Subject: [nvda] Administrative privileges.

Hi Group,

I am trying to assign shortcut keys to icons on the desktop, but it
won't go through as I am told I have no administrative privileges.
Using NVDA how do I get administrative privilege on my computer?
Your response will be greatly appreciated.
Nevzat











































Re: Administrative privileges.

 

Chris, I installed it from a disk. But recently I noticed the shortcut
no longer was there. After I updated Windows 10 the other day, K1000
reverted to demo version. Now I have to update K1000 to version 14. I
was told it was due to an update to Windows 10. I wonder if it did
affect Jaws shortcut, as well. My duxbury software also had a glitch,
but somehow I fixed that by going to control panel and user account.

Sarah, I have no idea what sublinux system
is.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:

Nevzat
Did you install Jaws yourself using the same account?

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Nevzat
Adil
Sent: 16 June 2018 20:18
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

It used to but not anymore; that's why I am trying to redo it but I
have no administrator permission according to the message I get.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Nevzat
If that's the case, it should already have the shortcut key set-up. Does
jaws start when you press control+alt+j?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 16 June 2018 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, the icon was created automatically when I downloaded it.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
If the desktop icon was correctly created, the "Start in" field will be
filled in already. You just need to tab to the next field which is the
shortcut key, then just press the letter you want to use (ctrl+alt will
be
added by Windows), tab to OK and press enter.

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
New
Zealand
Sent: 15 June 2018 21:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Hi


If it is just asigning the shortcut after you have gone into the
properties tab down to shortcut and asign one.


I think you can only use alt + ctrl + a letter like J for jaws or
another letter.


Make sure you save the settings.


Gene nz




On 6/16/2018 3:03 AM, Nevzat Adil wrote:
Hi all,

I solved the problem by going to Control Panel and User accounts. But
my problem with assigning a shortcut key to an icon on the desktop
still persists. I press alt+enter to go to properties for the shortcut
I have a problem what to write in the "start in" edit field. The
desktop icon in question is JAWS.
I thank you all for your responses.
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
Only an administrator account can change a standard account to an
administrator account. That is why I asked if there are any other
accounts
on the computer. If there are no other accounts, let me know and I'll
give
you details of a different method of solving the problem.

You can check if there are any other accounts by pressing Windows+i to
open
Settings, then press enter on Accounts. Tab to the list of topics and
arrow
down to Family and other people and press enter. Tab to the list of
other
account names and types on the machine and see if there is a user
account
with administrator privilidges. If there is, get the person to log on
using
that account, then they could use this settings process to edit your
account
details and change it from standard to administrator.

Cheers
Chris






-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 14 June 2018 20:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, yes, I get an error message saying I need to have administrator
permission. My operating system is Windows 10. I believe I have
standard user account. I tried to change user account and typed my
name and I was told that user account already exists. If I type
administrator would it change to that?
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
I would have thought you should be able to assign shortcuts as these
are
personal to your account and don't affect other users, so should not
require
admin priviledges. If you are using a work computer it maybe that a
corporate group policy is in effect which denies the capability but
this
would be unlikely.

As Brian asked, is your user account standard or administrator?
Could
you
give us more information, such as operating system being used, work
or
home
computer, is yours the only account on the computer etc.

The process I would use to assign a shortcut key is:
Select desktop icon
Press alt+enter to open properties
Tab to the shortcut key control and press the shortcut letter alone,
the
CTRL+Alt part of the command is added automatically by Windows
Tab to OK and press enter.

If you get an error after pressing OK, please give full details

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 13 June 2018 19:58
To: nvda@groups.io
Subject: [nvda] Administrative privileges.

Hi Group,

I am trying to assign shortcut keys to icons on the desktop, but it
won't go through as I am told I have no administrative privileges.
Using NVDA how do I get administrative privilege on my computer?
Your response will be greatly appreciated.
Nevzat






























Re: Administrative privileges.

Chris Mullins
 

Nevzat
Did you install Jaws yourself using the same account?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Nevzat Adil
Sent: 16 June 2018 20:18
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

It used to but not anymore; that's why I am trying to redo it but I
have no administrator permission according to the message I get.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Nevzat
If that's the case, it should already have the shortcut key set-up. Does
jaws start when you press control+alt+j?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Nevzat
Adil
Sent: 16 June 2018 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, the icon was created automatically when I downloaded it.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
If the desktop icon was correctly created, the "Start in" field will be
filled in already. You just need to tab to the next field which is the
shortcut key, then just press the letter you want to use (ctrl+alt will
be
added by Windows), tab to OK and press enter.

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
New
Zealand
Sent: 15 June 2018 21:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Hi


If it is just asigning the shortcut after you have gone into the
properties tab down to shortcut and asign one.


I think you can only use alt + ctrl + a letter like J for jaws or
another letter.


Make sure you save the settings.


Gene nz




On 6/16/2018 3:03 AM, Nevzat Adil wrote:
Hi all,

I solved the problem by going to Control Panel and User accounts. But
my problem with assigning a shortcut key to an icon on the desktop
still persists. I press alt+enter to go to properties for the shortcut
I have a problem what to write in the "start in" edit field. The
desktop icon in question is JAWS.
I thank you all for your responses.
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
Only an administrator account can change a standard account to an
administrator account. That is why I asked if there are any other
accounts
on the computer. If there are no other accounts, let me know and I'll
give
you details of a different method of solving the problem.

You can check if there are any other accounts by pressing Windows+i to
open
Settings, then press enter on Accounts. Tab to the list of topics and
arrow
down to Family and other people and press enter. Tab to the list of
other
account names and types on the machine and see if there is a user
account
with administrator privilidges. If there is, get the person to log on
using
that account, then they could use this settings process to edit your
account
details and change it from standard to administrator.

Cheers
Chris






-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 14 June 2018 20:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, yes, I get an error message saying I need to have administrator
permission. My operating system is Windows 10. I believe I have
standard user account. I tried to change user account and typed my
name and I was told that user account already exists. If I type
administrator would it change to that?
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
I would have thought you should be able to assign shortcuts as these
are
personal to your account and don't affect other users, so should not
require
admin priviledges. If you are using a work computer it maybe that a
corporate group policy is in effect which denies the capability but
this
would be unlikely.

As Brian asked, is your user account standard or administrator? Could
you
give us more information, such as operating system being used, work or
home
computer, is yours the only account on the computer etc.

The process I would use to assign a shortcut key is:
Select desktop icon
Press alt+enter to open properties
Tab to the shortcut key control and press the shortcut letter alone,
the
CTRL+Alt part of the command is added automatically by Windows
Tab to OK and press enter.

If you get an error after pressing OK, please give full details

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 13 June 2018 19:58
To: nvda@groups.io
Subject: [nvda] Administrative privileges.

Hi Group,

I am trying to assign shortcut keys to icons on the desktop, but it
won't go through as I am told I have no administrative privileges.
Using NVDA how do I get administrative privilege on my computer?
Your response will be greatly appreciated.
Nevzat
























Re: Read Allowed in Edge

Rosemarie Chavarria
 

Amen, Mary. I couldn't have said it any better. I didn't join this list to be in a college class of computer science. I joined it to try to help others who need it and also to ask questions if needed.


Rosemarie




On 6/16/2018 12:59 PM, Mary Otten wrote:
How absurd and not helpful. This is not a college class in computer science. It is an email list where we try to help each other, not put each other down and show ourselves off as being ever so very smart and clever.
Mary



On Jun 16, 2018, at 12:42 PM, Sarah k Alawami <marrie12@...> wrote:

I was taught if you cannot follow instructions and you cannot keep up I'm not stoping and you will fall behind. If you cannot keep up drop the class. If you cannot learn how to follow instructions other than what a simpleton does then you should go back to computer school where you learn to  cut copy and paste until you can even navigate the file explorer and use the command prompt by yourself, at least the basic stuff like cd and sudo and stuff. I'm not advanced either but I can follow techy and geeky instructions, allowly but I can do it.

Take care

On Jun 16, 2018, at 12:26 PM, Lino Morales <linomorales001@...> wrote:

To Brian first of all do you really have to put out instructions the average user can’t follow sir? Not everybody is a techie freak like you sir. To Gary. To change the voices in Red Aloud in Edge hit alt X then press enter on Read Aloud. Next tab to the button that says change voices. Their how simple is that?

 

Sent from Mail for Windows 10

 




Re: Read Allowed in Edge

Mary Otten
 

How absurd and not helpful. This is not a college class in computer science. It is an email list where we try to help each other, not put each other down and show ourselves off as being ever so very smart and clever.
Mary



On Jun 16, 2018, at 12:42 PM, Sarah k Alawami <marrie12@...> wrote:

I was taught if you cannot follow instructions and you cannot keep up I'm not stoping and you will fall behind. If you cannot keep up drop the class. If you cannot learn how to follow instructions other than what a simpleton does then you should go back to computer school where you learn to  cut copy and paste until you can even navigate the file explorer and use the command prompt by yourself, at least the basic stuff like cd and sudo and stuff. I'm not advanced either but I can follow techy and geeky instructions, allowly but I can do it.

Take care

On Jun 16, 2018, at 12:26 PM, Lino Morales <linomorales001@...> wrote:

To Brian first of all do you really have to put out instructions the average user can’t follow sir? Not everybody is a techie freak like you sir. To Gary. To change the voices in Red Aloud in Edge hit alt X then press enter on Read Aloud. Next tab to the button that says change voices. Their how simple is that?

 

Sent from Mail for Windows 10

 



Re: Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

 

Hi,

Yes, it’ll be archived.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kerryn Gunness via Groups.Io
Sent: Saturday, June 16, 2018 12:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

 

nice

but would the audio be available for this session?

i cannot attend, hense the reason i am asking

----- Original Message -----

From: Joseph Lee

Sent: Saturday, June 16, 2018 12:54 PM

Subject: [nvda] Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

 

Hi all,

 

I’d like to invite you to the first of the three online seminars on Introduction to NVDA Technical Support. Due to financial and other reasons, we’ll be using TeamTalk 5.

 

Seminar details:

 

  • Date: June 23, 2018 at 17:-00 UTC (10 AM Pacific, 1 PM Eastern and elsewhere)
  • Location: josephsl.net TeamTalk server (server is josephsl.net, 10333 for both TCP and UDP)
  • Duration: about an hour

 

Topics to be covered:

  • What is technical support
  • Basic NVDA concepts useful for tech support purposes, such as object navigation, focus versus review cursor overview and so on

 

Things to do before coming to the seminar:

  • Read NVDA user guide
  • Become familiar with NVDA commands and features, especially 2018.2 features
  • Come up with at least three questions users may have about NVDA concepts and commands that may show up in tech support sessions

 

Hope to see you all next week.

Cheers,

Joseph


Re: Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

Kerryn Gunness
 

nice
but would the audio be available for this session?
i cannot attend, hense the reason i am asking

----- Original Message -----
From: Joseph Lee
Sent: Saturday, June 16, 2018 12:54 PM
Subject: [nvda] Invitation: Introduction to NVDA Technical Support part 1, June 23, 2018 at 17:00 UTC

Hi all,

 

I’d like to invite you to the first of the three online seminars on Introduction to NVDA Technical Support. Due to financial and other reasons, we’ll be using TeamTalk 5.

 

Seminar details:

 

  • Date: June 23, 2018 at 17:-00 UTC (10 AM Pacific, 1 PM Eastern and elsewhere)
  • Location: josephsl.net TeamTalk server (server is josephsl.net, 10333 for both TCP and UDP)
  • Duration: about an hour

 

Topics to be covered:

  • What is technical support
  • Basic NVDA concepts useful for tech support purposes, such as object navigation, focus versus review cursor overview and so on

 

Things to do before coming to the seminar:

  • Read NVDA user guide
  • Become familiar with NVDA commands and features, especially 2018.2 features
  • Come up with at least three questions users may have about NVDA concepts and commands that may show up in tech support sessions

 

Hope to see you all next week.

Cheers,

Joseph


Re: Administrative privileges.

Sarah k Alawami
 

I wonder if using the sublinux system would work. Can you chmod and chown the shortcut or something so that it can then be modified?

On Jun 16, 2018, at 12:17 PM, Nevzat Adil <@Nev> wrote:

It used to but not anymore; that's why I am trying to redo it but I
have no administrator permission according to the message I get.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Nevzat
If that's the case, it should already have the shortcut key set-up. Does
jaws start when you press control+alt+j?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Nevzat
Adil
Sent: 16 June 2018 16:24
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, the icon was created automatically when I downloaded it.
Nevzat

On 6/16/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
If the desktop icon was correctly created, the "Start in" field will be
filled in already. You just need to tab to the next field which is the
shortcut key, then just press the letter you want to use (ctrl+alt will
be
added by Windows), tab to OK and press enter.

Cheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
New
Zealand
Sent: 15 June 2018 21:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Hi


If it is just asigning the shortcut after you have gone into the
properties tab down to shortcut and asign one.


I think you can only use alt + ctrl + a letter like J for jaws or
another letter.


Make sure you save the settings.


Gene nz




On 6/16/2018 3:03 AM, Nevzat Adil wrote:
Hi all,

I solved the problem by going to Control Panel and User accounts. But
my problem with assigning a shortcut key to an icon on the desktop
still persists. I press alt+enter to go to properties for the shortcut
I have a problem what to write in the "start in" edit field. The
desktop icon in question is JAWS.
I thank you all for your responses.
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
Only an administrator account can change a standard account to an
administrator account. That is why I asked if there are any other
accounts
on the computer. If there are no other accounts, let me know and I'll
give
you details of a different method of solving the problem.

You can check if there are any other accounts by pressing Windows+i to
open
Settings, then press enter on Accounts. Tab to the list of topics and
arrow
down to Family and other people and press enter. Tab to the list of
other
account names and types on the machine and see if there is a user
account
with administrator privilidges. If there is, get the person to log on
using
that account, then they could use this settings process to edit your
account
details and change it from standard to administrator.

Cheers
Chris






-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 14 June 2018 20:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] Administrative privileges.

Chris, yes, I get an error message saying I need to have administrator
permission. My operating system is Windows 10. I believe I have
standard user account. I tried to change user account and typed my
name and I was told that user account already exists. If I type
administrator would it change to that?
Nevzat

On 6/14/18, Chris Mullins <cjmullins29@...> wrote:
Hi Nevzat
I would have thought you should be able to assign shortcuts as these
are
personal to your account and don't affect other users, so should not
require
admin priviledges. If you are using a work computer it maybe that a
corporate group policy is in effect which denies the capability but
this
would be unlikely.

As Brian asked, is your user account standard or administrator? Could
you
give us more information, such as operating system being used, work or
home
computer, is yours the only account on the computer etc.

The process I would use to assign a shortcut key is:
Select desktop icon
Press alt+enter to open properties
Tab to the shortcut key control and press the shortcut letter alone,
the
CTRL+Alt part of the command is added automatically by Windows
Tab to OK and press enter.

If you get an error after pressing OK, please give full details

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Nevzat
Adil
Sent: 13 June 2018 19:58
To: nvda@groups.io
Subject: [nvda] Administrative privileges.

Hi Group,

I am trying to assign shortcut keys to icons on the desktop, but it
won't go through as I am told I have no administrative privileges.
Using NVDA how do I get administrative privilege on my computer?
Your response will be greatly appreciated.
Nevzat

























Re: Read Allowed in Edge

Sarah k Alawami
 

I was taught if you cannot follow instructions and you cannot keep up I'm not stoping and you will fall behind. If you cannot keep up drop the class. If you cannot learn how to follow instructions other than what a simpleton does then you should go back to computer school where you learn to  cut copy and paste until you can even navigate the file explorer and use the command prompt by yourself, at least the basic stuff like cd and sudo and stuff. I'm not advanced either but I can follow techy and geeky instructions, allowly but I can do it.

Take care

On Jun 16, 2018, at 12:26 PM, Lino Morales <linomorales001@...> wrote:

To Brian first of all do you really have to put out instructions the average user can’t follow sir? Not everybody is a techie freak like you sir. To Gary. To change the voices in Red Aloud in Edge hit alt X then press enter on Read Aloud. Next tab to the button that says change voices. Their how simple is that?

 

Sent from Mail for Windows 10

 



Read Allowed in Edge

Lino Morales
 

To Brian first of all do you really have to put out instructions the average user can’t follow sir? Not everybody is a techie freak like you sir. To Gary. To change the voices in Red Aloud in Edge hit alt X then press enter on Read Aloud. Next tab to the button that says change voices. Their how simple is that?

 

Sent from Mail for Windows 10