Date   

firefox not among browser apps listed in settings/default apps

Jaffar Sidek <jaffar.sidek10@...>
 

Hi all.  I have Google Chrome, Internet Explorer, Microsoft Edge and Mozilla Firefox  in the list of web browsers installed on my desktop pc.  Yet when I go to settings to set my default browser, Firefox isn't listed among the browsers installed as listed above.  How can I change this?  I am running windows 10.  Cheers!


Re: NVDA question

Kerryn Gunness <k_gunness@...>
 


thanks allot roger, jackie  and brian
 

----- Original Message -----
Sent: Friday, June 22, 2018 8:29 PM
Subject: Re: [nvda] NVDA question

1.  It sounds like you have audio ducking set to "Always On," which is not the default.  Open the NVDA Menu, Preferences, Synthesizer option and check what audio ducking is set to.  The default is no ducking.

2   There are tricks one could try to do this, but why not just install NVDA?

3.  Speech off is exactly what it says.  Sleep mode keeps NVDA running, but essentially disables over the application where you put it to sleep it until you wake it up.  It's watching for one and only one command, NVDA+Shift+Z to wake it up when focus is on that application.  Here's what the Commands Quick Reference says:  Sleep mode disables all NVDA commands and speech/braille output for the current application.  This is most useful in applications that provide their own speech or screen reading features.  Press the command again to disable sleep mode.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

          ~ H.L. Mencken, AKA The Sage of Baltimore

 

 


Re: NVDA question

 

1.  It sounds like you have audio ducking set to "Always On," which is not the default.  Open the NVDA Menu, Preferences, Synthesizer option and check what audio ducking is set to.  The default is no ducking.

2   There are tricks one could try to do this, but why not just install NVDA?

3.  Speech off is exactly what it says.  Sleep mode keeps NVDA running, but essentially disables over the application where you put it to sleep it until you wake it up.  It's watching for one and only one command, NVDA+Shift+Z to wake it up when focus is on that application.  Here's what the Commands Quick Reference says:  Sleep mode disables all NVDA commands and speech/braille output for the current application.  This is most useful in applications that provide their own speech or screen reading features.  Press the command again to disable sleep mode.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

          ~ H.L. Mencken, AKA The Sage of Baltimore

 

 


Re: NVDA question

Jackie
 

Much also has to do w/Skype, & you should check under audio options so
that volume are not lowered for Skype calls. You should also check
under the 'Sounds' applet of your Windows Control panel. Go to the
'Communications' tab & select the 'do Nothing' option' in order not to
make Windows lower volumes.

On 6/22/18, Roger Stewart <paganus2@gmail.com> wrote:
First, turn off audio ducking and this should stop the volume lowering
problem. If the nvda portable is in a directory on your computer, you
can make a shortcut to nvda.exe and then put a copy of this in your
startup group and it will start automatically. If you're running
portable version from a USB stick or other removable media, then this
can't be done.

Speech off turns off nvda's speech globally while sleep mode silences
speech for the currently active program only but it will return when you
switch to another program. This is good if you have a self voicing program.

Roger










On 6/22/2018 6:51 PM, Kerryn Gunness via Groups.Io wrote:
hi all
here are some questions i have:
1 when i use NVDA with skype, all sound volume lowers, system sounds,
skype as well as NVDA sound, how ot solve this problem
2 is there a way to have NVDA portable to load automaticall on a
computer? with out having to type the file location in the ron dialogue?
3 what is the difference between speach off and sleep mode?




--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


Re: NVDA question

Roger Stewart
 

First, turn off audio ducking and this should stop the volume lowering problem. If the nvda portable is in a directory on your computer, you can make a shortcut to nvda.exe and then put a copy of this in your startup group and it will start automatically. If you're running portable version from a USB stick or other removable media, then this can't be done.

Speech off turns off nvda's speech globally while sleep mode silences speech for the currently active program only but it will return when you switch to another program. This is good if you have a self voicing program.

Roger










On 6/22/2018 6:51 PM, Kerryn Gunness via Groups.Io wrote:
hi all
here are some questions i have:
1 when i use NVDA with skype, all sound volume lowers, system sounds, skype as well as NVDA sound, how ot solve this problem
2 is there a way to have NVDA portable to load automaticall on a computer? with out having to type the file location in the ron dialogue?
3 what is the difference between speach off and sleep mode?
 
 



NVDA question

Kerryn Gunness <k_gunness@...>
 


hi all
here are some questions i have:
1 when i use NVDA with skype, all sound volume lowers, system sounds, skype as well as NVDA sound, how ot solve this problem
2 is there a way to have NVDA portable to load automaticall on a computer? with out having to type the file location in the ron dialogue?
3 what is the difference between speach off and sleep mode?
 
 


Re: nvda installation problem

Don <donmi@...>
 

I have rebooted and it made no difference.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Chris via Groups.Io
Sent: Friday, June 22, 2018 12:49 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda installation problem

 

Try restarting windows then see if you can delete them then

 

From: Don
Sent: 22 June 2018 06:57
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda installation problem

 

I found NVDA files left after the uninstall in the program files (x86)

folder. There are 21 files. I tried removing the directory manually,

removing the files with a global delete and one by one. In all cases I got

the same message saying that the process could not be completed because a

file is in use.

 

I have never used safe mode. Can a screen reader, JAWS 2018, read the screen

in safe mode?

 

How do I get in to safe mode? Is that the right next step?

 

Don

 

-----Original Message-----

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail

list account via Groups.Io

Sent: Thursday, June 21, 2018 10:35 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] nvda installation problem

 

In the latest nvda system, the lib folders are renamed and new files are

written to new copies, then the old files deleted. If any of this fails then

this error can occur. I noticed it with another piece of software about a

week ago. A complete clear out fixed it.

 

 

However great care went into the fail safe nature for nvda in this regard,

but it might well be a very old  version of nvda if then updated to a very

new one might throw up errors we have not experienced.

Brian

 

bglists@...

Sent via blueyonder.

Please address personal E-mail to:-

briang1@..., putting 'Brian Gaff'

in the display name field.

----- Original Message -----

From: "Gene" <gsasner@...>

To: <nvda@nvda.groups.io>

Sent: Thursday, June 21, 2018 11:07 AM

Subject: Re: [nvda] nvda installation problem

 

 

You said that it was uninstalled.  That doesn't mean all files were removed.

 

The next question, which has been discussed here before but which I didn't

try to remember the answer to, is what files are left when uninstalling.  It

 

appears from the cannot overwrite a file message, that at least one file is

in use.  I don't know why but such questions may help you solve the proboem.

 

Perhaps something wasn't fully uninstalled that should have been and Windows

 

is keeping a file in use, perhaps because a registry entry is still present

that tells it to.  In short, I suspect that completely removing the program

may require dealing with such questions or, perhaps, going into safe mode

and removing the extra files.

 

Gene

----- Original Message -----

 

From: Don

Sent: Thursday, June 21, 2018 4:57 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] nvda installation problem

 

 

I see no indication in the list of apps and programs on the computer that

NVDAis present. If it were running on the log in screen how would I remove

it?

 

 

 

-----Original Message-----

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Simone Dal Maso

Sent: Thursday, June 21, 2018 2:08 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] nvda installation problem

 

Are you sure you don't have a copy of NVDA that is running on the logon

screen?

 

Il 21/06/2018 10:58, Don ha scritto:

> I have a new windows 10 laptop computer. I am trying to install the

> 2018.1 program. When I run the install application I get the message

> that NVDA was unable to overwrite, or remove a file. Another copy of

> NVDA may be running. I have no copy running. I did have someone else

> try to help me install NVDA before and they couldn't make it work so

> they uninstalled the previous copy they tried to install.

> I am currently running JAWS 2018. What do I need to do to get the

> installer to complete the installation of NVDA 2018.1 on my laptop?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Re: Microsoft Access Databases

Ervin, Glenn
 

Excel is better than Access for accessibility.

Glenn

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jim Homme
Sent: Thursday, June 21, 2018 2:13 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Microsoft Access Databases

 

Travis,

I have total influence over the process. What would you suggest?

 

Jim

 



==========
Jim Homme
Product Manager
Digital Accessibility
Bender Consulting Services
412-787-8567
https://www.benderconsult.com/our%20services/hightest-accessible-technology-solutions
People with disabilities, access job openings at https://www.benderconsult.com/careers/job-openings

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Travis Siegel <tsiegel@...>
Sent: Thursday, June 21, 2018 2:42:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Microsoft Access Databases

 

It's probably not your decision, and I don't know how much influence you have over the process, but just for general reference, if this database is going to be used by multiple people simultaneously, Microsoft Access is *not* the program to be used for this, since it doesn't do well with such usage.  Of course, if it's just something that will be posted for others to grab a copy when needed, then that doesn't apply, and the use is just fine, but just be aware of that before trying to build a whole subdepartment on such a system, it won't go well.

 

 

On 6/20/2018 12:18 PM, Brian Vogel wrote:

Jim,

           There are reams of material out there about designing virtually any type of Microsoft Office document/database/spreadsheet in a way that is maximally accessible to screen reader users.  Start poring through the results from:  https://duckduckgo.com/?q=MS+Access+accessibility+%22screen+readers%22

Some other results come up if you omit "screen readers" as part of the search, but many of them don't apply.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

          ~ H.L. Mencken, AKA The Sage of Baltimore

 

 

 

 

Virus-free. www.avast.com


Re: braille me display not quite ready

Buddy Brannan
 

Hi,

Yes, the hardware is all right. I had some concerns about it when I got my preproduction unit (battery rattling around loosely, easily fixed), but I understand they’ve fixed some of that stuff, and you get a carrying case now…I haven’t got that yet, I hope to be getting a replacement unit with the hardware issues and firmware updates addressed. Hopefully Josh can comment on the case. 

One other thing to note: charging is not via USB. In fact, there is no USB charging at all. Charging is via a dedicated charging socket using some sort of laptop power supply, 19 volts at a couple amps…I forget exactly. Anyway, charging is fast, being done in an hour, which should make up for any sort of inconvenience introduced by not being a USB charger. 

On Jun 22, 2018, at 10:27 AM, erik burggraaf <erik@...> wrote:

I've read this a few times and I am seeing issues that could largely be fixed or customized in the firmware.

Do I interpret correctly that the hardware itself is well built and allowing for personal preference, generally comfortable to use?

Thanks,

Erik

On June 22, 2018 9:45:44 AM "Buddy Brannan" <buddy@...> wrote:

Hey Josh,

Besides NBP, you should send this info to Innovision directly:
Innovision <customercare@...>

I’ve also pointed out the loud beep. It is very loud. Sorry they haven’t addressed that. So…the uppercase only is a problem inside files? I was alerted that filenames must be all uppercase, but hadn’t had any files to check that I felt like renaming. 


On Jun 22, 2018, at 7:42 AM, Josh Kennedy <joshknnd1982@...> wrote:

Hi,
I also sent this to national braille press in the hope there will be a firmware fix real soon… Here is a quick review of braille me. I really like it. Sort of. My issues? 
  1. BrailleMe emits a loud smoke-alarm type beep when turning on, shutting off, system errors, and battery low. It’s loud and will be a big distraction in class, church, business meetings, and so on. They have to add an option to turn off all beeps and tones emitted by braille me.
  2. The five problem characters. Dot 4, dots 4-5, dots 2-4-6, dots 1-2-4-5-6, and dots 1-2-5-6. And uppercase and lowercase letters. Braille me reads uppercase letters-only as it stands now. If it sees lowercase letters in its brl or brf files, it ignores them. Braille me expects uppercase. It also expects and read this carefully with your arrow keys. For the five dot combinations listed above, it currently expects to see: @^[]\ … again read with your arrows or turn on all punctuation in the screen reader of your choice because I wrote at sign and caret and some other symbols used to drive braille devices. Braille me expects those. But if it sees, `~{}| … again use all punctuation… and if it sees lowercase rather than uppercase letters it just shows empty cells. This is a problem. Also, lack of word wrap, no compress whitespace and multiple linefeeds to make reading on displays easier, move by page either when hitting a formfeed character or move back and forth by 1000 characters or a braille page, that has to be added as well. Along with ability to add and delete your own custom bookmarks to make studying easier. When using with NVDA, and expand word at the cursor to computer braille is checked, it cannot show capital letters due to only a six dot cell. It cannot show dot7. I propose having capital letters in computer braille, i.e. letters with dot7 or any dot7 combinations to blink up and down. Also no ability to input any kind of braille into the computer. This should be added. Other than that. It’s fine. Other than that I am quite impressed with it! Cursor routing works great. 
Josh
 
 
Sent from Mail for Windows 10
 
 
 
Sent from Mail for Windows 10
 



Re: Problem when updating NVDA with Firefox running

Jonathan COHN
 

Hello,

 

I believe this is a long standing known issue and is true in some other Assitive Technologies that Firefox content is not recognized if the AT was started after the content was rendered.

 

In some cases a refresh of the page has resolved issues like this, but Firefox has gone through a major change in accessibility access since I first looked at these issues.

 

I wonder, does hitting the control-alt-N command restart NVDA when Firefox is running and if so, does this also cause a lost of NVDA navigation within the current Firefox page?

 

Thanks,

 

Jonathan

 


Re: problems

Ervin, Glenn
 

I don't change synths on my computer, only when I install it on other people's computers.
Glenn

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail list account via Groups.Io
Sent: Thursday, June 21, 2018 12:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems

I guess a lot of us have been using the new scheme for a long time running from the beta versions and for most people from feedback the new scheme is actually easier to manage. its far more like other software than it was in fact.
Of course you cannot please all of the people all of the time as they say, but this change has been requested for some years to my knowledge. If you could tell us why you think its worse than opening and closing windows every time you need to move between synth and voice I'm sure others might be able to help.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Ervin, Glenn" <glenn.ervin@nebraska.gov>
To: <nvda@nvda.groups.io>
Sent: Thursday, June 21, 2018 3:36 PM
Subject: Re: [nvda] problems


I noticed this menu problem too yesterday.
I wanted to slow down the voice for a new user and could not find it
anywhere in the menus.
I had to set it to default settings, and that was really not slow enough for
her.
I hope it goes back to the way it was.

Glenn

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dr. J. michael
jones
Sent: Thursday, June 21, 2018 3:07 AM
To: nvda@nvda.groups.io
Subject: [nvda] problems

I am greatful for any help with these items.
I have a new computer running Windows 8.1 and have downloaded NDVA several
times and the Windows sapi5 voyce will not showup. I also can not seem to
find it in my windows.
I have also downloaded 2 of the free voices from the NDVA site and properly
used the manage apps to install them and they will not appear in the list of
synthesizers, as a matter of fact the ESpeak does not appear either.

Finally the menus have completely changed from just a week ago, because I
had downloaded NDVA for another person and the menus completely different?
Any thoughts? Thanks so much


Re: braille me display not quite ready

erik burggraaf <erik@...>
 

I've read this a few times and I am seeing issues that could largely be fixed or customized in the firmware.

Do I interpret correctly that the hardware itself is well built and allowing for personal preference, generally comfortable to use?

Thanks,

Erik

On June 22, 2018 9:45:44 AM "Buddy Brannan" <buddy@...> wrote:

Hey Josh,

Besides NBP, you should send this info to Innovision directly:
Innovision <customercare@...>

I’ve also pointed out the loud beep. It is very loud. Sorry they haven’t addressed that. So…the uppercase only is a problem inside files? I was alerted that filenames must be all uppercase, but hadn’t had any files to check that I felt like renaming. 


On Jun 22, 2018, at 7:42 AM, Josh Kennedy <joshknnd1982@...> wrote:

Hi,
I also sent this to national braille press in the hope there will be a firmware fix real soon… Here is a quick review of braille me. I really like it. Sort of. My issues? 
  1. BrailleMe emits a loud smoke-alarm type beep when turning on, shutting off, system errors, and battery low. It’s loud and will be a big distraction in class, church, business meetings, and so on. They have to add an option to turn off all beeps and tones emitted by braille me.
  2. The five problem characters. Dot 4, dots 4-5, dots 2-4-6, dots 1-2-4-5-6, and dots 1-2-5-6. And uppercase and lowercase letters. Braille me reads uppercase letters-only as it stands now. If it sees lowercase letters in its brl or brf files, it ignores them. Braille me expects uppercase. It also expects and read this carefully with your arrow keys. For the five dot combinations listed above, it currently expects to see: @^[]\ … again read with your arrows or turn on all punctuation in the screen reader of your choice because I wrote at sign and caret and some other symbols used to drive braille devices. Braille me expects those. But if it sees, `~{}| … again use all punctuation… and if it sees lowercase rather than uppercase letters it just shows empty cells. This is a problem. Also, lack of word wrap, no compress whitespace and multiple linefeeds to make reading on displays easier, move by page either when hitting a formfeed character or move back and forth by 1000 characters or a braille page, that has to be added as well. Along with ability to add and delete your own custom bookmarks to make studying easier. When using with NVDA, and expand word at the cursor to computer braille is checked, it cannot show capital letters due to only a six dot cell. It cannot show dot7. I propose having capital letters in computer braille, i.e. letters with dot7 or any dot7 combinations to blink up and down. Also no ability to input any kind of braille into the computer. This should be added. Other than that. It’s fine. Other than that I am quite impressed with it! Cursor routing works great. 
Josh
 
 
Sent from Mail for Windows 10
 
 
 
Sent from Mail for Windows 10
 


Re: problems

Ervin, Glenn
 

I never used the shortcuts, I just went through the menus.
Glenn

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail list account via Groups.Io
Sent: Thursday, June 21, 2018 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems

You can still jump to the sheet with the shortcuts just as before.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Dr. J. michael jones" <j.michaeljones@live.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, June 21, 2018 10:24 AM
Subject: Re: [nvda] problems


Those do not exist anymore it’s preferences and then settings
On Jun 21, 2018, at 12:22 PM, Gene
<gsasner@ripco.com<mailto:gsasner@ripco.com>> wrote:

Are you in the synthesizer dialog, control NVDA key s, or the voice
dialog, control NVDA key v.

First, you move to SAPI 5 in the synthesizer dialog, then activate the ok
button. Then, open the voice dialog and find the voice you want in the
list and activate the ok button.

I don't know what you have done but you may be looking in the wrong
places.

I don't use the new version of NVDA but the latest version, and perhaps
the one before, I don't know, uses a different interface for some
settings. I'll let those who use it discuss it further.

Gene
---- Original Message -----
From: Dr. J. michael jones<mailto:j.michaeljones@live.com>
Sent: Thursday, June 21, 2018 3:07 AM
To: nvda@nvda.groups.io<mailto:nvda@nvda.groups.io>
Subject: [nvda] problems

I am greatful for any help with these items.
I have a new computer running Windows 8.1 and have downloaded NDVA several
times and the Windows sapi5 voyce will not showup. I also can not seem to
find it in my windows.
I have also downloaded 2 of the free voices from the NDVA site and
properly used the manage apps to install them and they will not appear in
the list of synthesizers, as a matter of fact the ESpeak does not appear
either.

Finally the menus have completely changed from just a week ago, because I
had downloaded NDVA for another person and the menus completely different?
Any thoughts? Thanks so much





Re: Problem when updating NVDA with Firefox running

Chris
 

I really don’t think this is a issue

Its just common sense to save your work and close all open programs prior to an update,  whether its nvda or not 😃

You never know what could go wrong

 

 

 


Re: Updated the wiki

 

It looks like anyone can edit the wiki if they have a github account. Yeah, I don't fork it or anything I just edit it directly. I do, however, plan on making a seperate page talking about how accessible the portable apps suite is, and the accessible portable software out there. I use portableapps to try software without bogging down my registry which is nice! Does anybody know if you can create a child page underneath that one? Yeah, the more people editing it, the better, in my opinion, so if you have a git hub account, brush up on your markdown and edit it directly.


Re: braille me display not quite ready

Buddy Brannan
 

Hey Josh,

Besides NBP, you should send this info to Innovision directly:
Innovision <customercare@...>

I’ve also pointed out the loud beep. It is very loud. Sorry they haven’t addressed that. So…the uppercase only is a problem inside files? I was alerted that filenames must be all uppercase, but hadn’t had any files to check that I felt like renaming. 


On Jun 22, 2018, at 7:42 AM, Josh Kennedy <joshknnd1982@...> wrote:

Hi,
I also sent this to national braille press in the hope there will be a firmware fix real soon… Here is a quick review of braille me. I really like it. Sort of. My issues? 
  1. BrailleMe emits a loud smoke-alarm type beep when turning on, shutting off, system errors, and battery low. It’s loud and will be a big distraction in class, church, business meetings, and so on. They have to add an option to turn off all beeps and tones emitted by braille me.
  2. The five problem characters. Dot 4, dots 4-5, dots 2-4-6, dots 1-2-4-5-6, and dots 1-2-5-6. And uppercase and lowercase letters. Braille me reads uppercase letters-only as it stands now. If it sees lowercase letters in its brl or brf files, it ignores them. Braille me expects uppercase. It also expects and read this carefully with your arrow keys. For the five dot combinations listed above, it currently expects to see: @^[]\ … again read with your arrows or turn on all punctuation in the screen reader of your choice because I wrote at sign and caret and some other symbols used to drive braille devices. Braille me expects those. But if it sees, `~{}| … again use all punctuation… and if it sees lowercase rather than uppercase letters it just shows empty cells. This is a problem. Also, lack of word wrap, no compress whitespace and multiple linefeeds to make reading on displays easier, move by page either when hitting a formfeed character or move back and forth by 1000 characters or a braille page, that has to be added as well. Along with ability to add and delete your own custom bookmarks to make studying easier. When using with NVDA, and expand word at the cursor to computer braille is checked, it cannot show capital letters due to only a six dot cell. It cannot show dot7. I propose having capital letters in computer braille, i.e. letters with dot7 or any dot7 combinations to blink up and down. Also no ability to input any kind of braille into the computer. This should be added. Other than that. It’s fine. Other than that I am quite impressed with it! Cursor routing works great. 
Josh
 
 
Sent from Mail for Windows 10
 
 
 
Sent from Mail for Windows 10
 


Re: Donation needed to start my business #addonrelesae #addonrelese #addontesting #addonrelease

Gene
 

I should have signed my last message as Gene, Moderator so here is that signature.
 
Gene Moderator

Sent: Friday, June 22, 2018 8:05 AM
Subject: [nvda] Donation needed to start my business #addonrelease #addonrelease #addonrelesae #addonrelese #addontesting #addonrelese

hello, I am a visually impaired from Bangladesh. I completed my post graduation degree 7 years ago. But still I did not get any job. So, my life is full of frustration. My family is very poor. That's why they are not able to provide me financial support. Just for few days I have taken a shop. But for having no financial capability, I am not able to start my business. So, I need your financial support. If you are able to donate me some money, I could lead my life comfortably. To donate me, you can follow my bank account as follow.
Md. Muklesur Rahman
Account no: 11010132924.
Dutch Bangla Bank Limited, Dhanmondi Branch, Bangladesh.


Re: Donation needed to start my business #addonrelesae #addonrelese #addontesting #addonrelease

Gene
 

I'm sorry, but this is not a list for soliciting for personal or other donations not directly related to NVDA or perhaps for products related to NVDA in some direct way.  As far as I know, there is no rule about this in the list rules but this would be a standard assumption on any list that doesn't specifically say it allows such solicitations. 
 
There are other places to solicit money, such as Go Fund Me. 
 
Gene

----- Original Message -----
Sent: Friday, June 22, 2018 8:05 AM
Subject: [nvda] Donation needed to start my business #addonrelease #addonrelease #addonrelesae #addonrelese #addontesting #addonrelese

hello, I am a visually impaired from Bangladesh. I completed my post graduation degree 7 years ago. But still I did not get any job. So, my life is full of frustration. My family is very poor. That's why they are not able to provide me financial support. Just for few days I have taken a shop. But for having no financial capability, I am not able to start my business. So, I need your financial support. If you are able to donate me some money, I could lead my life comfortably. To donate me, you can follow my bank account as follow.
Md. Muklesur Rahman
Account no: 11010132924.
Dutch Bangla Bank Limited, Dhanmondi Branch, Bangladesh.


Donation needed to start my business #addonrelesae #addonrelese #addontesting #addonrelease

Muklesur Rahman
 

hello, I am a visually impaired from Bangladesh. I completed my post graduation degree 7 years ago. But still I did not get any job. So, my life is full of frustration. My family is very poor. That's why they are not able to provide me financial support. Just for few days I have taken a shop. But for having no financial capability, I am not able to start my business. So, I need your financial support. If you are able to donate me some money, I could lead my life comfortably. To donate me, you can follow my bank account as follow.
Md. Muklesur Rahman
Account no: 11010132924.
Dutch Bangla Bank Limited, Dhanmondi Branch, Bangladesh.


Re: Problem connecting a Hims Braillesense to NVDA

 

Jackie, I did both soft and hard reset, but did not work, not until I
restarted the computer. You are right, though, that most often a
reset would work.
Nevzat

On 6/21/18, Jackie <abletec@gmail.com> wrote:
Folks, sometimes the connections just get messed up w/these displays.
A reset can often help.

On 6/21/18, Nevzat Adil <nevzatadil@gmail.com> wrote:
Strangely, I am also experiencing the same issue with Braille Edge. It
was fine until today. I go to NVDA menues, click on setting, choose
Braille, and select HIMS Braille but I get the error message that
braille display could not be loaded. When I disconnect the USB cable
and then reconnect I hear no sound. Obviously there is no connection.
What could be the issue? I tried the same with JAWS and I get the same
error message.

On 6/21/18, P. Otter <pam.otter@gmail.com> wrote:
that's rather strange, because i've the same braille display.
here it works just fine.
are you sure, there is no problem with the cable or connectors or with
the
display itself?
i'll search for a tool, to test if all is working correctly.
and when you plug in the display on the computer, is there a sound as
usual?
if not, there is realy something wrong.
cheers
paul otter


Op 21-6-2018 om 19:43 schreef Michel Such:

Well, driver removed, machine restarted, and it still does not work.


Michel Such

Le 21/06/2018 à 19:01, P. Otter a écrit :

ok, and don't forget to remove the driver before!!!
cheers
paul otter


Op 21-6-2018 om 15:09 schreef Daniel Hawkins:

hmm, I too have a Braille Sense U2, I installed a driver to get it to
work via usb, but I have not used it in a while. I should check it
out
once I reinstall NVDA on my computer.
Daniel Hawkins
computersassociated@gmail.com



On Jun 21, 2018, at 4:46 AM, P. Otter <pam.otter@gmail.com> wrote:

hello, yes it is, very strange.
per haps for other screenreaders but not with nvda.
put the usb connector into the computer and choose inside the menu
of
nvda for the hims that's the driver for all of the hims displays
like
smart beetle, or braillesense or what ever.
i know, there are also braille displays they need an installed
driver
before or when you use a bluetooth connection.
but not with hims if connected with usb.
cheers
paul otter


Op 21-6-2018 om 10:46 schreef Michel Such:

Strange, the usr's manual says that a driver is required...


Michel Such

Le 21/06/2018 à 10:29, P. Otter a écrit :

hi, i think, that's the problem he has installed a driver for the
braille sense.
there is no need to install any driver.
he has to go inside the menu of nvda there choose braille and
there
for the hims.
that's all!
he has nothing else to do.
i have the same braillesense and it works fine with the newest
nvda.
so let he remove the installed driver and restart the computer and
retry to connect the display

 as discribed above.
cheers
paul otter

Op 21-6-2018 om 10:03 schreef Michel Such:

Hi,


A user telles me that, with the latest NVDA Version, He cn't
connect
his Braillesense terminal.

He installed the appropriate driver but the terminal is not
recognized.

Has anyone got tnis problem and is there a fix I could suggest
him?





.



--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com