nvda@nvda.groups.io

Re: Windows key combination to change screen orientation

Lino Morales <linomorales001@...>

#49193

Hi Lori. Alt CTRL and NVDA key plus left arrow to get to portrait and same key combo with down arrow to change to landscape.

Sent from Mail for Windows 10

Show quoted text

From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Laurie Mehta via Groups.Io <lauriemehta@...>
Sent: Monday, October 15, 2018 8:58:55 PM
To: nvda@nvda.groups.io
Subject: [nvda] Windows key combination to change screen orientation

Could one of you please remind me what is the key combination in Windows to flip the screen back to its normal orientation after it had been inadvertently turned upside down?
Thanks very much! (smile)
-LM

Windows key combination to change screen orientation

Laurie Mehta

#49192

Could one of you please remind me what is the key combination in Windows to flip the screen back to its normal orientation after it had been inadvertently turned upside down?
Thanks very much! (smile)
-LM

Re: Microsoft word question

Richard Wells

#49191

Easiest way to read status line in any application that has one is NVDA-KEY+END.

Show quoted text

On 10/14/2018 2:01 PM, Brian Vogel wrote:

See the topic, word count in MS word document, in the JAWS for Windows group for a discussion of several different ways to get to the status bar.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763

The terrible state of public education has paid huge dividends in ignorance. Huge. We now have a country that can be told blatant lies — easily checkable, blatant lies — and I’m not talking about the covert workings of the CIA. When we have a terrorist attack, on September 11, 2001 with 19 men — 15 of them are Saudis — and five minutes later the whole country thinks they’re from Iraq — how can you have faith in the public? This is an easily checkable fact. The whole country is like the O.J. Simpson jurors.

~ Fran Lebowitz in Ruminator Magazine interview with Susannah McNeely (Aug/Sept 2005)

Re: AttributeError: 'IAccessible' object has no attribute 'UIAElement'

bering.p

#49190

Hi,
Not with NVDA 2018.2.1 version installed.
Cheers.

Paul.

Le 15/10/2018 19:33, Brian's Mail list account via Groups.Io a écrit :

Show quoted text

Does this occur on an installed copy?
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- 
From: "bering.p" <bering.p@...>
To: "nvda courrier" <nvda@nvda.groups.io>
Sent: Monday, October 15, 2018 11:44 AM
Subject: [nvda] AttributeError: 'IAccessible' object has no attribute 
'UIAElement'

Hi,
Just to  signal the error I noted in log viewer.
Thanks to create a ticket if this error  is not only on my PC.
W10 32 bits, NVDA 2018.3.2 and last NVDA alpha.
Sep to reproduce:
Just Open peripherals's  manager.

The log:

INFO - __main__ (12:01:24.657):
Starting NVDA
INFO - core.main (12:01:24.954):
Config dir: F:\documents\Paulo\temp\nvda 2018.3.2\userConfig
INFO - config.ConfigManager._loadConfig (12:01:24.954):
Loading config: .\userConfig\nvda.ini
INFO - core.main (12:01:25.167):
NVDA version 2018.3.2
INFO - core.main (12:01:25.167):
Using Windows version 10.0.17134 workstation
INFO - core.main (12:01:25.167):
Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) 
[MSC v.1500 32 bit (Intel)]
INFO - core.main (12:01:25.167):
Using comtypes version 1.1.3
INFO - core.main (12:01:25.259):
Add-ons are disabled. Restart NVDA to enable them.
DEBUGWARNING - touchHandler.touchSupported (12:01:25.407):
Touch only supported on installed copies
setSynth
INFO - synthDrivers.espeak.SynthDriver.__init__ (12:01:25.831):
Using eSpeak NG version 1.49.3 dev
INFO - synthDriverHandler.setSynth (12:01:25.980):
Loaded synthDriver espeak
INFO - core.main (12:01:25.980):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (12:01:25.986):
Braille input initialized
INFO - braille.initialize (12:01:25.986):
Using liblouis version 3.6.0
INFO - braille.BrailleHandler.setDisplayByName (12:01:25.990):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (12:01:26.065):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (12:01:26.076):
UIAutomation: IUIAutomation5
DEBUGWARNING - touchHandler.touchSupported (12:01:27.092):
Touch only supported on installed copies
INFO - core.main (12:01:27.092):
NVDA initialized
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects 
(12:01:35.803):
AppModule does not have a binding handle
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects 
(12:01:50.615):
AppModule does not have a binding handle
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects 
(12:01:53.895):
AppModule does not have a binding handle
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects 
(12:02:05.556):
AppModule does not have a binding handle
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole 
(12:02:10.832):
accRole failed: (-2147024809, 'Param\xe8tre incorrect.', (None, None, 
None, 0, None))
ERROR - eventHandler.executeEvent (12:02:10.867):
error executing event: gainFocus on 
<NVDAObjects.IAccessible.sysTreeView32.BrokenCommctrl5Item object at 
0x04024710> with extra args of {}
Traceback (most recent call last):
  File "eventHandler.pyo", line 147, in executeEvent
  File "eventHandler.pyo", line 160, in doPreGainFocus
  File "api.pyo", line 107, in setFocusObject
  File "baseObject.pyo", line 34, in __get__
  File "baseObject.pyo", line 115, in _getPropertyViaCache
  File "NVDAObjects\__init__.pyo", line 496, in _get_container
  File "baseObject.pyo", line 34, in __get__
  File "baseObject.pyo", line 115, in _getPropertyViaCache
  File "NVDAObjects\IAccessible\sysTreeView32.pyo", line 261, in 
_get_parent
AttributeError: 'IAccessible' object has no attribute 'UIAElement'

Cheers.
Paul.

Re: NVDA and bit locker

Kerryn Gunness <k_gunness@...>

#49189

brian
its an incription feature used to protect drives from hackers
this one i am speaking about, deals with a bit locker at the log on screen before the sign in screen

Show quoted text

----- Original Message ----- 
From: "Brian's Mail list account via Groups.Io" <bglists@...>
To: <nvda@nvda.groups.io>
Sent: Monday, October 15, 2018 3:48 PM
Subject: Re: [nvda] NVDA and bit locker

Well since nobody seems to have actually replied. What exactly is a bitlocker in the context of what you mean here. IE more details please then somebody might reply. I know of bitlocker codes, but have no knowledge of any ways to use them myself.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- 
From: "Kerryn Gunness via Groups.Io" <k_gunness@...>
To: <nvda@nvda.groups.io>
Sent: Monday, October 15, 2018 2:04 PM
Subject: [nvda] NVDA and bit locker

hi all
how does one navigate a bit locker? and is NVDA accessible with it?
thanks

kerryn

More info just released via Ars Technica on Winamp

Lino Morales <linomorales001@...>

#49188

http://arstechnica.com/information-technology/2018/10/winamp-set-to-release-entirely-new-version-next-year/

Sent from Mail for Windows 10

Re: accessible Medium desktop client

Brian's Mail list account

#49187

Are you saying that there is now way to publish if you already have a file created offline?
That seems to be a little odd to me.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

Show quoted text

----- Original Message ----- 
From: "Robert Kingett" <kingettr@...>
To: <nvda@nvda.groups.io>
Sent: Monday, October 15, 2018 4:53 PM
Subject: [nvda] accessible Medium desktop client

I've been on the hunt for a desktop application that would hook into the
API. why? well, because it is a really great way for writers,
independent writers, to create their own content and get paid for it.
The below is the closest thing I could find. I've been told it's very
accessible on the Mac, but I have no idea personally. I'm sharing this
here just in case anyone would know of someone remotely interested in
creating a windows version. Publishing through Google docs works very
well, but I like writing offline, without a browser open.

https://github.com/sivahq/mediumdesk

Re: NVDA and bit locker

Brian's Mail list account

#49186

Well since nobody seems to have actually replied. What exactly is a bitlocker in the context of what you mean here. IE more details please then somebody might reply. I know of bitlocker codes, but have no knowledge of any ways to use them myself.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

Show quoted text

----- Original Message ----- 
From: "Kerryn Gunness via Groups.Io" <k_gunness@...>
To: <nvda@nvda.groups.io>
Sent: Monday, October 15, 2018 2:04 PM
Subject: [nvda] NVDA and bit locker


hi all
how does one navigate a bit locker? and is NVDA accessible with it?
thanks

kerryn

Re: AttributeError: 'IAccessible' object has no attribute 'UIAElement'

Brian's Mail list account

#49185

Does this occur on an installed copy?
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

Show quoted text

----- Original Message ----- 
From: "bering.p" <bering.p@...>
To: "nvda courrier" <nvda@nvda.groups.io>
Sent: Monday, October 15, 2018 11:44 AM
Subject: [nvda] AttributeError: 'IAccessible' object has no attribute 'UIAElement'

Hi,
Just to  signal the error I noted in log viewer.
Thanks to create a ticket if this error  is not only on my PC.
W10 32 bits, NVDA 2018.3.2 and last NVDA alpha.
Sep to reproduce:
Just Open peripherals's  manager.

The log:

INFO - __main__ (12:01:24.657):
Starting NVDA
INFO - core.main (12:01:24.954):
Config dir: F:\documents\Paulo\temp\nvda 2018.3.2\userConfig
INFO - config.ConfigManager._loadConfig (12:01:24.954):
Loading config: .\userConfig\nvda.ini
INFO - core.main (12:01:25.167):
NVDA version 2018.3.2
INFO - core.main (12:01:25.167):
Using Windows version 10.0.17134 workstation
INFO - core.main (12:01:25.167):
Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]
INFO - core.main (12:01:25.167):
Using comtypes version 1.1.3
INFO - core.main (12:01:25.259):
Add-ons are disabled. Restart NVDA to enable them.
DEBUGWARNING - touchHandler.touchSupported (12:01:25.407):
Touch only supported on installed copies
setSynth
INFO - synthDrivers.espeak.SynthDriver.__init__ (12:01:25.831):
Using eSpeak NG version 1.49.3 dev
INFO - synthDriverHandler.setSynth (12:01:25.980):
Loaded synthDriver espeak
INFO - core.main (12:01:25.980):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (12:01:25.986):
Braille input initialized
INFO - braille.initialize (12:01:25.986):
Using liblouis version 3.6.0
INFO - braille.BrailleHandler.setDisplayByName (12:01:25.990):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (12:01:26.065):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (12:01:26.076):
UIAutomation: IUIAutomation5
DEBUGWARNING - touchHandler.touchSupported (12:01:27.092):
Touch only supported on installed copies
INFO - core.main (12:01:27.092):
NVDA initialized
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects (12:01:35.803):
AppModule does not have a binding handle
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects (12:01:50.615):
AppModule does not have a binding handle
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects (12:01:53.895):
AppModule does not have a binding handle
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects (12:02:05.556):
AppModule does not have a binding handle
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (12:02:10.832):
accRole failed: (-2147024809, 'Param\xe8tre incorrect.', (None, None, None, 0, None))
ERROR - eventHandler.executeEvent (12:02:10.867):
error executing event: gainFocus on <NVDAObjects.IAccessible.sysTreeView32.BrokenCommctrl5Item object at 0x04024710> with extra args of {}
Traceback (most recent call last):
  File "eventHandler.pyo", line 147, in executeEvent
  File "eventHandler.pyo", line 160, in doPreGainFocus
  File "api.pyo", line 107, in setFocusObject
  File "baseObject.pyo", line 34, in __get__
  File "baseObject.pyo", line 115, in _getPropertyViaCache
  File "NVDAObjects\__init__.pyo", line 496, in _get_container
  File "baseObject.pyo", line 34, in __get__
  File "baseObject.pyo", line 115, in _getPropertyViaCache
  File "NVDAObjects\IAccessible\sysTreeView32.pyo", line 261, in _get_parent
AttributeError: 'IAccessible' object has no attribute 'UIAElement'

Cheers.
Paul.

accessible Medium desktop client

Robert Kingett

#49184

I've been on the hunt for a desktop application that would hook into the API. why? well, because it is a really great way for writers, independent writers, to create their own content and get paid for it. The below is the closest thing I could find. I've been told it's very accessible on the Mac, but I have no idea personally. I'm sharing this here just in case anyone would know of someone remotely interested in creating a windows version. Publishing through Google docs works very well, but I like writing offline, without a browser open.

https://github.com/sivahq/mediumdesk

Re: Integrating an existing website with Wordpress

Jackie

#49183

Hello, John. I'm assuming (& that's always dangerous, because you know
what you do when you do that), that you're wanting to keep the
existing site but make a supplemental site in addition to it, ie, a
blog, a store, or similar. So what you do here is install WordPress to
a separate subdirectory, ie, blog, store, etc. Then, code a link to
the WordPress site on your homepage's menu, & you're good to go.

Show quoted text

On 10/15/18, John J. Boyer <john.boyer@...> wrote:
Thanks to all those who have been answering my questions about Wordpress.
The domain where I plan to run Wordpress
already has a website. How do I integrate the content of this site with
wordpress and then set up a blog?

Thanks,
John

--
John J. Boyer
Email: john.boyer@...
website: http://www.abilitiessoft.org
Status: Company dissolved but website and email addresses  live.
Location: Madison, Wisconsin, USA
Mission: developing assistive technology software and providing STEM
services
        that are available at no cost

-- 
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com

Integrating an existing website with Wordpress

John J. Boyer

#49182

Thanks to all those who have been answering my questions about Wordpress. The domain where I plan to run Wordpress 
already has a website. How do I integrate the content of this site with wordpress and then set up a blog?

Thanks,
John

-- 
John J. Boyer
Email: john.boyer@...
website: http://www.abilitiessoft.org
Status: Company dissolved but website and email addresses  live.
Location: Madison, Wisconsin, USA
Mission: developing assistive technology software and providing STEM services 
        that are available at no cost

Re: NVDAa lags when composing emails with tb, or is it just me?

Jaffar Sidek <jaffar.sidek10@...>

#49181

No. I find that particular feature cumbersome. Cheers!

Show quoted text

On 15/10/2018 9:33 PM, Chris via Groups.Io wrote:

Do you have text suggestions turned on?

This can be found in settings > devices > typing

In windows

I found with text suggestion turned on there appears to be a lag in some text editing programs

From: Jaffar Sidek
Sent: 15 October 2018 13:28
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDAa lags when composing emails with tb, or is it just me?

Windows 10, version 1809. Cheers!

On 15/10/2018 7:37 PM, Chris via Groups.Io wrote:

Which version of windows?

From: Jaffar Sidek
Sent: 15 October 2018 12:03
To: nvda@nvda.groups.io
Subject: [nvda] NVDAa lags when composing emails with tb, or is it just me?

Hi all. I am facing a strange issue with Thunderbird and that is when I

am composing mail directly with it, NVDA seems to lag horribly. NOw I

can't tell if it is TB's or NVDA's fault, or some setting in tb that I

should change. This occurs not only when I am typing but also when I am

reviewing the message I am writing. No matter if I arrow left or right,

or ctrl+arrow left or right, the lag seems to be there all the time. So

is it just me experiencing this or is this a Tb or NVDA problem? Just

as a note, this horrible lag only happens with TB. If some help is

forthcoming, i would greatly appreciate it. Cheers!

Re: Microsoft word question ... word count

Gene

#49180

It appears that once you are on the status bar, this is a tool bar and that to see what is shown, you need to use the right and left arrows, as you would to move through a standard tool bar.

Gene

Show quoted text

----- Original Message -----

From: Ann Byrne

Sent: Monday, October 15, 2018 8:46 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] Microsoft word question ... word count

Press f6 to get to the status bar. If the word
count isn't displayed, press the applications key
and arrow through the display choices to activate the word count.

At 06:33 AM 10/15/2018, you wrotBut using that
command reads the entire status bar and it is
very difficult, if possible at all, to pick out
that one number from all the other
information. However, if you read the status
line, that moves the NVDA review location to the
status line. So, if you figure out what order
the information is presented, you can review the
line item by item and determine the number.
>
>Gene
>----- Original Message -----
>
>From: <mailto:rui.fontes@...>Rui Fontes
>Sent: Monday, October 15, 2018 5:27 AM
>To: <mailto:nvda@nvda.groups.io>nvda@nvda.groups.io
>Subject: Re: [nvda] Microsoft word question
>
>As I said, the hotkey is NVDA+End.
>
>Rui
>
>
>Ã€s 01:29 de 15/10/2018, Pranav Lal escreveu:
> > Hi,
> >
> > Use the f6 key to cycle between the document
> and the status bar. I do not know of a hotkey
> to read it but this may be a good feature request.
> >
> > Pranav
> >
> >
> >
> >
> >
>
>
>

Re: Microsoft word question ... word count

Ann Byrne

#49179

Press f6 to get to the status bar.  If the word count isn't displayed, press the applications key and arrow through the display  choices to activate the word count.

At 06:33 AM 10/15/2018, you wrotBut using that command reads the entire status bar and it is very difficult, if possible at all, to pick out that one number from all the other information.  However, if you read the status line, that moves the NVDA review location to the status line.  So, if you figure out what order the information is presented, you can review the line item by item and determine the number.

Show quoted text

Gene
----- Original Message -----

From: <mailto:rui.fontes@...>Rui Fontes
Sent: Monday, October 15, 2018 5:27 AM
To: <mailto:nvda@nvda.groups.io>nvda@nvda.groups.io
Subject: Re: [nvda] Microsoft word question

As I said, the hotkey is NVDA+End.

Rui

Ã€s 01:29 de 15/10/2018, Pranav Lal escreveu:
Hi,

Use the f6 key to cycle between the document and the status bar. I do not know of a hotkey to read it but this may be a good feature request.

Pranav

Re: NVDAa lags when composing emails with tb, or is it just me?

Chris

#49178

Do you have text suggestions turned on?

This can be found in settings > devices > typing

In windows

I found with text suggestion turned on there appears to be a lag in some text editing programs

Show quoted text

From: Jaffar Sidek
Sent: 15 October 2018 13:28
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDAa lags when composing emails with tb, or is it just me?

Windows 10, version 1809. Cheers!

On 15/10/2018 7:37 PM, Chris via Groups.Io wrote:

Which version of windows?

From: Jaffar Sidek
Sent: 15 October 2018 12:03
To: nvda@nvda.groups.io
Subject: [nvda] NVDAa lags when composing emails with tb, or is it just me?

Hi all. I am facing a strange issue with Thunderbird and that is when I
am composing mail directly with it, NVDA seems to lag horribly. NOw I
can't tell if it is TB's or NVDA's fault, or some setting in tb that I
should change. This occurs not only when I am typing but also when I am
reviewing the message I am writing. No matter if I arrow left or right,
or ctrl+arrow left or right, the lag seems to be there all the time. So
is it just me experiencing this or is this a Tb or NVDA problem? Just
as a note, this horrible lag only happens with TB. If some help is
forthcoming, i would greatly appreciate it. Cheers!

NVDA and bit locker

Kerryn Gunness <k_gunness@...>

#49177

hi all

how does one navigate a bit locker? and is NVDA accessible with it?

thanks

kerryn

Re: Microsoft word question

Gene

#49176

I should say that the information is there but you may have to experiment to see just how to get to it. I have Word Starter, which is not the newest version of Word. I found, when playing with the status line after writing my previous message in the thread, that it may move up a number of lines from the bottom. If the read status line reads the bottom line and it isn't the status line, moving up should find it. I also find that information isn't necessarily presented in a proper manner. Read the line a bit at a time, perhaps character by character in some places. I found that at times, in my version, the number of words is followed by another number and then a space. So I might se 101 which means ten words and then the number 1. I'm not sure what the number 1 is referring to. It may refer to the page I'm on but I didn't try to figure it out. My point is that the information is there if you figure out how to read it.

Someone has already told you another way to get a word count and that would be easier to use if it matches the procedure in your version. But you may want or need, for some reason, to use the status line for this or other information. and its good to know about it just from a standpoint of equality. If sighted people have this resource and they find it useful, why shouldn't blind people know about it? You don't have to know everything a sighted person knows or sees in a program but there are certain features that it may be useful to know about.

Programs that still have status lines may have useful information in the status line and it is a good idea to look for a status line in various programs. At times, useful information is not found in a traditional status line, by which I mean at the bottom of a screen or there may not be one. but, for example, in MP3 Direct Cut, the program gives you useful information in a line near the top of the page. When the program is recording, it says, writing and then gives the path and filename of the file it is writing to. That keeps you from issuing the record command and not knowing if the program is recording. That line also gives information about how far, by minutes and seconds, you are into the file when you are playing or editing it.

My overall point is that unless people start looking around using review keys in programs where they aren't getting enough information in other ways, they may be significantly limiting the accuracy and/or convenience of use of the program.

Gene
----- Original Message -----

Show quoted text

From: Gene

Sent: Monday, October 15, 2018 6:33 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] Microsoft word question

But using that command reads the entire status bar and it is very difficult, if possible at all, to pick out that one number from all the other information. However, if you read the status line, that moves the NVDA review location to the status line. So, if you figure out what order the information is presented, you can review the line item by item and determine the number.

Gene

----- Original Message -----

From: Rui Fontes

Sent: Monday, October 15, 2018 5:27 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] Microsoft word question

As I said, the hotkey is NVDA+End.

Rui

Às 01:29 de 15/10/2018, Pranav Lal escreveu:
> Hi,
>
> Use the f6 key to cycle between the document and the status bar. I do not know of a hotkey to read it but this may be a good feature request.
>
> Pranav
>
>
>
>
>

Re: NVDAa lags when composing emails with tb, or is it just me?

Jaffar Sidek <jaffar.sidek10@...>

#49175

Windows 10, version 1809. Cheers!

Show quoted text

On 15/10/2018 7:37 PM, Chris via Groups.Io wrote:

Which version of windows?

From: Jaffar Sidek
Sent: 15 October 2018 12:03
To: nvda@nvda.groups.io
Subject: [nvda] NVDAa lags when composing emails with tb, or is it just me?

Hi all. I am facing a strange issue with Thunderbird and that is when I

am composing mail directly with it, NVDA seems to lag horribly. NOw I

can't tell if it is TB's or NVDA's fault, or some setting in tb that I

should change. This occurs not only when I am typing but also when I am

reviewing the message I am writing. No matter if I arrow left or right,

or ctrl+arrow left or right, the lag seems to be there all the time. So

is it just me experiencing this or is this a Tb or NVDA problem? Just

as a note, this horrible lag only happens with TB. If some help is

forthcoming, i would greatly appreciate it. Cheers!

Re: NVDAa lags when composing emails with tb, or is it just me?

Chris

#49174

Which version of windows?

Show quoted text

From: Jaffar Sidek
Sent: 15 October 2018 12:03
To: nvda@nvda.groups.io
Subject: [nvda] NVDAa lags when composing emails with tb, or is it just me?

Hi all. I am facing a strange issue with Thunderbird and that is when I

am composing mail directly with it, NVDA seems to lag horribly. NOw I

can't tell if it is TB's or NVDA's fault, or some setting in tb that I

should change. This occurs not only when I am typing but also when I am

reviewing the message I am writing. No matter if I arrow left or right,

or ctrl+arrow left or right, the lag seems to be there all the time. So

is it just me experiencing this or is this a Tb or NVDA problem? Just

as a note, this horrible lag only happens with TB. If some help is

forthcoming, i would greatly appreciate it. Cheers!