Date   

Re: percentage when downloading

Gary Metzler
 

Hi Roger,

 

Thank you, that was very helpful.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Roger Stewart
Sent: Thursday, November 1, 2018 12:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] percentage when downloading

 

Open the nvda menu and then open settings.  Arrow down until you get to Object Presentation.  In there you'll find an item about progress bar output.  You can set it to off, beep, speak, or beep and speak.  If you have it on speak or speak and beep, it will announce percentage of the progress and I usually hear download progress spoken.  Hope this helps.

 

Roger

 

 

 

 

 

 

 

 

 

On 11/1/2018 10:51 AM, Gary Metzler wrote:

Hi All,

 

I am using the latest win 10 and nvda.  I would like to know where to find the percentage while downloading in the settings tab?  Thanks for any help.

 

Regards, Gary KN4OX

Sendto: gmtravel@...

 

 


Re: percentage when downloading

Gary Metzler
 

Hi Jackie,

That did the trick. Thank you a whole bunch.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jackie
Sent: Thursday, November 1, 2018 12:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] percentage when downloading

I'm not entirely certain what you're asking, Gary, but try under object presentation> progress bar output.

On 11/1/18, Gary Metzler <gmtravel@...> wrote:
Hi All,



I am using the latest win 10 and nvda. I would like to know where to
find the percentage while downloading in the settings tab? Thanks for any help.



Regards, Gary KN4OX

Sendto: gmtravel@...







--
Remember! Friends Help Friends Be Cybersafe Jackie McBride Helping Cybercrime Victims 1 Person at a Time https://brighter-vision.com


Re: percentage when downloading

Roger Stewart
 

Open the nvda menu and then open settings.  Arrow down until you get to Object Presentation.  In there you'll find an item about progress bar output.  You can set it to off, beep, speak, or beep and speak.  If you have it on speak or speak and beep, it will announce percentage of the progress and I usually hear download progress spoken.  Hope this helps.

Roger









On 11/1/2018 10:51 AM, Gary Metzler wrote:

Hi All,

 

I am using the latest win 10 and nvda.  I would like to know where to find the percentage while downloading in the settings tab?  Thanks for any help.

 

Regards, Gary KN4OX

Sendto: gmtravel@...

 



Re: percentage when downloading

Jackie
 

I'm not entirely certain what you're asking, Gary, but try under
object presentation> progress bar output.

On 11/1/18, Gary Metzler <gmtravel@...> wrote:
Hi All,



I am using the latest win 10 and nvda. I would like to know where to find
the percentage while downloading in the settings tab? Thanks for any help.



Regards, Gary KN4OX

Sendto: gmtravel@...






--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


percentage when downloading

Gary Metzler
 

Hi All,

 

I am using the latest win 10 and nvda.  I would like to know where to find the percentage while downloading in the settings tab?  Thanks for any help.

 

Regards, Gary KN4OX

Sendto: gmtravel@...

 


Re: WordPress for dummies

Kerryn Gunness <k_gunness@...>
 

add me also to the word press list, if one is created

----- Original Message -----
From: "Gerardo Corripio" <gera1027@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, November 01, 2018 8:27 AM
Subject: Re: [nvda] WordPress for dummies


Yes please add me if you were to start off a Wordpres EMail list! The only aspect of Wordpress I kind of know how ti work is the iPhone’s app sadly. I’d like to learn more, possibly to start some sort of a Spanish-speaking blindness tech site, in which I’d have audio content especially, and also give people assesments one-on-one on technology, and why not, seek donations from those who’d like to in pro for me getting access to technology and services which I’d feature on these audio contents.technola

Gera
Enviado desde mi iPhone SE de Telcel

El 1 nov 2018, a la(s) 4:51 a. m., marcio via Groups.Io <marcinhorj21@...> escribió:

Jackie escreveu:
You've given me something to think about though regarding the
possibility of starting a WordPress mailing list.
Jackie,
In case you start a mailing list on this, please, could you add me there?
I'm much interested in learning more of working with Wordpress, I'm sure it'll be pretty good.

Thanks,
Marcio



Re: Virtual dub 2.

Jacob Kruger
 

FWIW, it still seems to be just as accessible/usable as the prior version - had 1.9 here, but, just gave it a quick run-through.


Only real issue have had with virtual dub is the size of it's output files - have always ended up using another bit of software to convert them, to drop their file sizes down a whole lot...<smile>


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"...resistance is futile...but, acceptance is versatile..."
On 2018-11-01 2:58 PM, Robert Kingett wrote:

This is an updated version of the accessible video editor. I have not tried VD 2 yet because the developer is sighted, which always makes me skiddish on accessibility, but the homepage is below. Good thing is, it's open source, so if anybody wants to add onto it and otherwise, it's yours for the playing.


http://virtualdub2.com/


Re: WordPress for dummies

John J. Boyer
 

There may already be a WordPress mailing list on www.freelists.org but I haven't checked yet.

John

On Thu, Nov 01, 2018 at 07:51:49AM -0300, marcio via Groups.Io wrote:
Jackie escreveu:
You've given me something to think about though regarding the
possibility of starting a WordPress mailing list.
Jackie,
In case you start a mailing list on this, please, could you add me there?
I'm much interested in learning more of working with Wordpress, I'm sure
it'll be pretty good.

Thanks,
Marcio


--
John J. Boyer
Email: john.boyer@...
website: http://www.abilitiessoft.org
Status: Company dissolved but website and email addresses live.
Location: Madison, Wisconsin, USA
Mission: developing assistive technology software and providing STEM services
that are available at no cost


Virtual dub 2.

 

This is an updated version of the accessible video editor. I have not tried VD 2 yet because the developer is sighted, which always makes me skiddish on accessibility, but the homepage is below. Good thing is, it's open source, so if anybody wants to add onto it and otherwise, it's yours for the playing.


http://virtualdub2.com/


Re: adding page numbers to word documents

enes sarıbaş
 

hello,

I am using office 16.0.10827.20181

 log will be sent privately.


On 11/1/2018 5:59 AM, Quentin Christensen wrote:

Which version of Word are you using?

All I can tell you is that it worked fine when I originally wrote that section of the Microsoft Word with NVDA training material a couple of years ago, and in fact I most recently went over that section of the material just a week or so ago and it worked fine then too, both with the most current Office 365 subscription at the time.

A copy of your log here might be useful.

Regards

Quentin.

On Thu, Nov 1, 2018 at 6:28 AM enes sarıbaş <enes.saribas@...> wrote:
hi all,

So I want to add pages to word documents. However, when I go to the
insert ribbon, and click header, NVDA becomes unresponsive, and the page
number button appears unavailable. Does anyone know how this can be
achieved?






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



Re: WordPress for dummies

Gerardo Corripio
 

Yes please add me if you were to start off a Wordpres EMail list! The only aspect of Wordpress I kind of know how ti work is the iPhone’s app sadly. I’d like to learn more, possibly to start some sort of a Spanish-speaking blindness tech site, in which I’d have audio content especially, and also give people assesments one-on-one on technology, and why not, seek donations from those who’d like to in pro for me getting access to technology and services which I’d feature on these audio contents.technola

Gera
Enviado desde mi iPhone SE de Telcel

El 1 nov 2018, a la(s) 4:51 a. m., marcio via Groups.Io <marcinhorj21@...> escribió:

Jackie escreveu:
You've given me something to think about though regarding the
possibility of starting a WordPress mailing list.
Jackie,
In case you start a mailing list on this, please, could you add me there?
I'm much interested in learning more of working with Wordpress, I'm sure it'll be pretty good.

Thanks,
Marcio



Re: WordPress for dummies

Greg Wocher
 

Hello,
I too would be interested in an email list for WordPress.

Greg Wocher

On Nov 1, 2018, at 6:51 AM, marcio via Groups.Io <marcinhorj21@...> wrote:

Jackie escreveu:
You've given me something to think about though regarding the
possibility of starting a WordPress mailing list.
Jackie,
In case you start a mailing list on this, please, could you add me there?
I'm much interested in learning more of working with Wordpress, I'm sure it'll be pretty good.

Thanks,
Marcio



Re: WordPress for dummies

 

Jackie escreveu:
You've given me something to think about though regarding the
possibility of starting a WordPress mailing list.
Jackie,
In case you start a mailing list on this, please, could you add me there?
I'm much interested in learning more of working with Wordpress, I'm sure it'll be pretty good.

Thanks,
Marcio


Pesky Google calendars on web sites

Brian's Mail list account
 

Hi all Our association has an events calendar on the site, which I've mentioned here before. although now, the dates in the on page window more or less make sense, its now static for the few dates it displays. You can open the full calendar and when you do you get a series of very confusing tables. I thought, I know lets save it. It saves in PDF but when you try to read this pdf, the formatting is totally screwed even having weird chars and spaces in words.
I guess its not been tagged. Also if you cut and paste the tables on the html page the thing then ends up as all the days all the dates then all the events all strung out and messed up.
Is there any way with Google calendars to actually end up with a proper tabbed list or doc file that can be used to cut and paste items for inserting into a script somebody can read?
For those who are masochists, here is the address again. I need a lie down. In my view if the on page static view was bigger, say a whole month that would be acceptable.
https://www.kingstonassociationforblind.org/

Note I'm using Firefox and Waterfox on windows 7. Of course the office ladies are sighted so see no issues.

Brian
bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.


VINUX-SUPPORT: Cisco Academy for the Vision Impaired

Mallard <mallard@...>
 

-------- Messaggio Inoltrato --------
Oggetto: VINUX-SUPPORT: Cisco Academy for the Vision Impaired
Data: Tue, 30 Oct 2018 19:37:10 +1100
Mittente: Rob Whyte <rob@...>
Rispondi-a: vinux-support@...
Organizzazione: Vinux Project
A: vinux-support@... <vinux-support@...>, vinux-development@...



Hi all I am sharing this offer.

Please spread around your networks and like their page to share the post.

Feel free to forward email onto other lists.


*Cisco Academy for the Vision Impaired
<https://m.facebook.com/ciscovision/?refid=52&__tn__=C-R>*



** Notice of Intention to deliver CCNA Network Essentials as a FREE VI course ***

Good Afternoon All, just a quick post to notify ALL CAVI students of our intention to run the Cisco CCNA Network Essentials offering starting on Monday 12th November 2018.

This is a FREE offering and there will be NO charges applied for enrolling or attending. If you would like to enrol and participate, please leave your name in the feed, PM me directly, or send an email to me @ neil.hines@.... i will then send you a personalised response and process your enrolment the weekend of the 10th/11th November in lieu of the Monday 12th November start date.

The course offering definition is listed below:

Network Essentials:

This course introduces a variety of topics to build students’ skills and understanding of networking. The course also introduces networking devices and the Cisco IOS® software. Students will learn how networks are set up, how devices are configured, how communication takes place on a network and the basics of implementing network security best practices which will enhance the students’ confidence in communicating their knowledge and work in networking-related professions. Upon completion of this course, the student will receive a Certificate of Completion.

This course will run for approximately 20 weeks and each chapter from the course will be covered at 1 chapter every 2 weeks. Further details will be supplied in the personalised email sent to you when you register your intent to participate.


Kind regards Rob Whyte
--
Remember to frequently check our Wiki: http://wiki.vinuxproject.org
Our website: http://www.vinuxproject.org
You can search or view our group on the web: http://groups.google.com/group/vinux-support
Talk to us on IRC irc.vinuxproject.org #Vinux

Unsubscribe from Vinux by emailing vinux-support+unsubscribe@...
---
You received this message because you are subscribed to the Google Groups "Vinux support forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vinux-support+unsubscribe@... <mailto:vinux-support+unsubscribe@...>.


Re: adding page numbers to word documents

Mallard <mallard@...>
 

Hello Quentin,


By the way, I had bought that ebook when it was released, but for some reason I can't find it anywhere anymore.

Is it possible to download a new copy somehow, given that I've already paid for it? Or would you have any other suggestions to obtain a new copy?

Ciao,

Ollie

Il 01/11/2018 06:59, Quentin Christensen ha scritto:
Which version of Word are you using?

All I can tell you is that it worked fine when I originally wrote that section of the Microsoft Word with NVDA training material a couple of years ago, and in fact I most recently went over that section of the material just a week or so ago and it worked fine then too, both with the most current Office 365 subscription at the time.

A copy of your log here might be useful.

Regards

Quentin.

On Thu, Nov 1, 2018 at 6:28 AM enes sarıbaş <enes.saribas@... <mailto:enes.saribas@...>> wrote:

hi all,

So I want to add pages to word documents. However, when I go to the
insert ribbon, and click header, NVDA becomes unresponsive, and
the page
number button appears unavailable. Does anyone know how this can be
achieved?






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

www.nvaccess.org <http://www.nvaccess.org/>
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess


Re: adding page numbers to word documents

Quentin Christensen
 

Which version of Word are you using?

All I can tell you is that it worked fine when I originally wrote that section of the Microsoft Word with NVDA training material a couple of years ago, and in fact I most recently went over that section of the material just a week or so ago and it worked fine then too, both with the most current Office 365 subscription at the time.

A copy of your log here might be useful.

Regards

Quentin.

On Thu, Nov 1, 2018 at 6:28 AM enes sarıbaş <enes.saribas@...> wrote:
hi all,

So I want to add pages to word documents. However, when I go to the
insert ribbon, and click header, NVDA becomes unresponsive, and the page
number button appears unavailable. Does anyone know how this can be
achieved?






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Vocalizer for nvda: please contact me off list thank you

Quentin Christensen
 

Angela,

If you need to contact the vocalizer folks, you can find their links on our Extra Voices page: https://github.com/nvaccess/nvda/wiki/ExtraVoices

I only offer that rather than their websites, is that there are several versions (Tiflotecnia and Code Factory) and you didn't specify which you were after.

Regards

Quentin.


On Wed, Oct 31, 2018 at 9:59 PM Angela Delicata <angeladelicata@...> wrote:
Hi,
Sorry for writing here, if possible , please, contact me off list.





--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: WordPress for dummies

Jackie
 

John, the forum to which I refer is not meant for tutorials. It's a
support forum.

Your screen reader's virtual find facility is 1 of your best friends
when it comes to Wordpress. Using your navigation keys such as b & h
are also very helpful.

You've given me something to think about though regarding the
possibility of starting a WordPress mailing list. I can understand
where things could feel pretty hard when you're dealing both w/a sight
& a hearing impairment. Certainly the audio demos on my wp4newbs.com
site, for example, wouldn't be accessible to you, though the text
materials are. So I do understand it's somewhat harder.

On 10/31/18, Sarah k Alawami <marrie12@...> wrote:
When I started using wordpress in 2011 I mastered the php editing I had
to do for my themes with a little help from google. I would save my
edits or book marked pages with the code blocks I needed to edit and
apply them to every install of wp. It was and is quite easy to use. All
you do is install plugins, activate them and you pretty much have a
website going in about n hour, 2 hours, depends. But if you google the
wordpress codecs you will get a indepth manual on how to run self hosted
sites. It's well worth the read.

On 31 Oct 2018, at 21:58, John J. Boyer wrote:

Hi Jackie,

Sorry for doubting your expertise. I'm really just floundering around
in WordPress. Suddenly pressing tab has begun to
take me out of the editor. It goes to a button called Toggle Panel,
not to the Publish box. I have quite a number of
comments on the few posts I have been able to make.

I need a tutorial on blogs. Frankly, I don't think WordPress is very
friendly to beginners. A mailing list would be much
more appropriate for that than the forums.

Let's hear feedback.

John

On Wed, Oct 31, 2018 at 07:54:04AM -0700, Jackie wrote:
John, truthfully, pressing tab just once for me tabs away from the
WordPress visual editor. You do need to press NVDA+space to exit
browse mode. As someone who has done WordPress for 8 years, as a site
owner myself, a hosting provider for primarily WordPress sites, & a
holder of a WordPress Support forum Contributor badge, I'm scarcely
"just guessing". Obviously I don't know what your setup is, ie, if
it's a virtual box where keystrokes may not work as expected, etc,
but
tab does work. You may wish to try shift-tabbing back to the title
box
& again, you'll find it necessary to press NVDA+space.

On 10/31/18, marcio via Groups.Io
<marcinhorj21@...> wrote:
Kevin,
I think Wordpress and Facebook aren't the same thing. See, Wordpress
is
a blog manager platform, whereas Facebook is a social network.
But of course we can post everything we want both using Wordpress
and
Facebook, although I believe there's a different purpose for each
one.

Cheers,
Marcio

Em 30/10/2018 22:45, Kevin escreveu:

Here’s an even dumber question,  what’s Wordpress

And why not just post in facebook, is it the same thing?

E-mail is golden!!!
Kevin Lee

*From: *marcio via Groups.Io
<mailto:marcinhorj21@...>
*Sent: *Tuesday, October 30, 2018 12:16 PM
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *Re: [nvda] Dumb question about writing posts in
Wordpress

Hi John,

You're probably on the focus mode.

Just get off of it and press tab some times, now you should be able
to

continue with your post without problems.

Hth

Cheers,

Marcio

Em 30/10/2018 15:02, John J. Boyer escreveu:

I'm just getting started with Wordpress. When I write a post the
title is no problem. However, when I write the body I

can't terminate the editor and move on to  the next field. What
is
the keystroke to terminate the editor? I can't find

that anywhere. Probably that's because it's obvious to the
sighted,
but it should have been explained.

Thanks,
John




--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


--
John J. Boyer
Email: john.boyer@...
website: http://www.abilitiessoft.org
Status: Company dissolved but website and email addresses live.
Location: Madison, Wisconsin, USA
Mission: developing assistive technology software and providing STEM
services
that are available at no cost





--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


Re: WordPress for dummies

Sarah k Alawami
 

When I started using wordpress in 2011 I mastered the php editing I had to do for my themes with a little help from google. I would save my edits or book marked pages with the code blocks I needed to edit and apply them to every install of wp. It was and is quite easy to use. All you do is install plugins, activate them and you pretty much have a website going in about n hour, 2 hours, depends. But if you google the wordpress codecs you will get a indepth manual on how to run self hosted sites. It's well worth the read.

On 31 Oct 2018, at 21:58, John J. Boyer wrote:

Hi Jackie,

Sorry for doubting your expertise. I'm really just floundering around in WordPress. Suddenly pressing tab has begun to take me out of the editor. It goes to a button called Toggle Panel, not to the Publish box. I have quite a number of comments on the few posts I have been able to make.

I need a tutorial on blogs. Frankly, I don't think WordPress is very friendly to beginners. A mailing list would be much more appropriate for that than the forums.

Let's hear feedback.

John

On Wed, Oct 31, 2018 at 07:54:04AM -0700, Jackie wrote: > John, truthfully, pressing tab just once for me tabs away from the > WordPress visual editor. You do need to press NVDA+space to exit > browse mode. As someone who has done WordPress for 8 years, as a site > owner myself, a hosting provider for primarily WordPress sites, & a > holder of a WordPress Support forum Contributor badge, I'm scarcely > "just guessing". Obviously I don't know what your setup is, ie, if > it's a virtual box where keystrokes may not work as expected, etc, > but > tab does work. You may wish to try shift-tabbing back to the title > box > & again, you'll find it necessary to press NVDA+space. > > On 10/31/18, marcio via Groups.Io > wrote: >> Kevin, >> I think Wordpress and Facebook aren't the same thing. See, Wordpress >> is >> a blog manager platform, whereas Facebook is a social network. >> But of course we can post everything we want both using Wordpress >> and >> Facebook, although I believe there's a different purpose for each >> one. >> >> Cheers, >> Marcio >> >> Em 30/10/2018 22:45, Kevin escreveu: >>> >>> Here’s an even dumber question,  what’s Wordpress >>> >>> And why not just post in facebook, is it the same thing? >>> >>> E-mail is golden!!! >>> Kevin Lee >>> >>> *From: *marcio via Groups.Io >>> marcinhorj21@... >>> *Sent: *Tuesday, October 30, 2018 12:16 PM >>> *To: *nvda@nvda.groups.io nvda@nvda.groups.io >>> *Subject: *Re: [nvda] Dumb question about writing posts in >>> Wordpress >>> >>> Hi John, >>> >>> You're probably on the focus mode. >>> >>> Just get off of it and press tab some times, now you should be able >>> to >>> >>> continue with your post without problems. >>> >>> Hth >>> >>> Cheers, >>> >>> Marcio >>> >>> Em 30/10/2018 15:02, John J. Boyer escreveu: >>> >>>> I'm just getting started with Wordpress. When I write a post the >>> title is no problem. However, when I write the body I >>> >>>> can't terminate the editor and move on to  the next field. What >>>> is >>> the keystroke to terminate the editor? I can't find >>> >>>> that anywhere. Probably that's because it's obvious to the >>>> sighted, >>> but it should have been explained. >>> >>>> >>> >>>> Thanks, >>> >>>> John >>> >>>> >>> >>> >> >> >> >> >> > > > -- > Remember! Friends Help Friends Be Cybersafe > Jackie McBride > Helping Cybercrime Victims 1 Person at a Time > https://brighter-vision.com > > >

-- John J. Boyer Email: john.boyer@... website: http://www.abilitiessoft.org Status: Company dissolved but website and email addresses live. Location: Madison, Wisconsin, USA Mission: developing assistive technology software and providing STEM services that are available at no cost

51301 - 51320 of 101195