Date   

Re: ergent help needed with phonetic transcriptions

enes sarıbaş
 

so brian, I guess I misunderstood you then. I thought you were atempting to discourage me from studieing phonetics, or linguistics entirely because of the element of transcription.


On 11/28/2018 4:15 PM, Brian Vogel wrote:
On Wed, Nov 28, 2018 at 10:49 AM, Cohn, Jonathan wrote:
Sofar as I can tell nobody who has commented on the thread since, has looked at this paper.
I did, when it was mentioned by someone else on the JAWS group, in a topic to which I gave the direct link.

There is a difference between possible to create a way for a screen reader to do a character by character IPA reading, and same being practical for extensive use.  Just because something can be done, and indeed it seems has been done, doesn't make it good advice to say, "Hey, this is a reasonable area to try to delve into with circumstances being what they are."

I would not discourage anyone who's blind from the study of phonetics, which is entirely possible without ever doing a single character of phonetic transcription (which is a poor substitute for actual recordings).  I would strongly discourage trying to delve into phonetic transcription, or the reading of same, due to the constraints I've mentioned previously.  Practicality does, and should, play a role.

The study of linguistics requires a knowledge of phonetics and phonetic theories.  It really doesn't require the ability to do phonetic transcription, nor even to read it well, as many ditch it after an introductory course if their chosen area really doesn't require it.

But, at this point, we've really strayed from even tangential relationship to NVDA in any meaningful sense.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 



Re: Another problem.

Gene
 

I believe when I tried the program, it flagged something that wasn't malware.  I'm not generalizing about the program.  All antimalware programs
have false positives.  I'm saying to check the list of found items before proceeding, which should be done in general.  Gene
 
Gene

----- Original Message -----
Sent: Wednesday, November 28, 2018 6:07 PM
Subject: Re: [nvda] Another problem.

A very good scanner that specifically targets adware, potentially unwanted programs (PUPs), browser toolbars, and browser hijacks is:  
AdwCleaner

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 


Re: ergent help needed with phonetic transcriptions

enes sarıbaş
 

hi,

I have opted not to write the essay in phonology  for my studies. After I get my current load of work off my shoulders, I will certainly reach out to him.


On 11/28/2018 3:49 PM, Cohn, Jonathan wrote:

There is a blind professor of Linguistics at Rice University, in an earlier message on this thread I put a reference to a paper of his about updating the Braille codes for modern phonetic alphabit and there was also a link in that paper with information on how he extended JAWS to support IPA. Sofar as I can tell nobody who has commented on the thread since, has looked at this paper.

Certainly, it is mostly a matter of ensuring proper support of the UNICODE characters related to the IPA and ensuring that the materials you are looking at are encoded in UNICODE rather than an older style of coding. If nothing else, have you attempted to reach out to the professor at Rice?

 

Take care,

 

Jonathan Cohn

 

 

From: <nvda@nvda.groups.io> on behalf of Brian Vogel <britechguy@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Tuesday, November 27, 2018 at 8:27 PM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: Re: [nvda] ergent help needed with phonetic transcriptions

 

If you want my serious recommendation it would be to have a sit-down with your department head, and any other faculty in your program, and ask them their opinion as to a path through a linguistics degree, particularly an advanced one, without phonetic transcription being a big part of it.

I have to believe there is a path through, though I would imagine it would involve a specifically designed undergraduate path as well as a clear idea as to what your graduate focus will be and that it not involve phonetics (transcription directly, not an understanding of, which of course you'll have).

They are in a far better place to give you informed opinion, and the direct assistance with program design that you'll need, than I can.  There's nothing wrong with reasonable accommodations in academic pursuit, particularly if your desired area of specialty does not rely on an area of study that's not essential to it in any meaningful sense.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 



Re: Outlook 2016

 

Kelby,

        What, specifically, are you having difficulty with NVDA reading (or not reading)?   I have Outlook 2016 on my machine here at home along with NVDA and I can see if the issues exist here.

         In the quick playing I've done with Outlook (both 2010 and 2016) and NVDA in the past they've played well together.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 


Re: Another problem.

 

A very good scanner that specifically targets adware, potentially unwanted programs (PUPs), browser toolbars, and browser hijacks is:  
AdwCleaner

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 


Re: NVDA and Jarte

Brice Mijares
 

Thank you for proving some of our experiences of
having to add enable screen reader mode to the clip board in order for Jarte to work correctly.

On 11/28/2018 3:31 PM, Sam Bushman wrote:
Hi All,
We are all just trying to do our best and help each other the best we can.
This is from the jarte manual.
34 Screen Reader Mode
Background
A screen reader is a program capable of audiblizing the text appearing on a
computer
screen for the benefit of visually impaired computer users. Microsoft's
Narrator program is
an example of a basic screen reader built into Windows. There are other more
advanced
screen reader program's available including the free NVDA program and the
popular JAWS
program.
Jarte's Screen Reader Mode
Jarte runs in a special screen reader mode if a recognized screen reader
program is already
running on the computer when Jarte is started. Jarte uses a special screen
reader friendly
interface while in screen reader mode. A number of Jarte's visually oriented
features are
removed from the interface while in screen reader mode (e.g., color related
features, interface
panels that require visual interaction, etc) to make use of Jarte more
efficient for visually
impaired users. The interfaces for other features are modified to make them
more readable
to a screen reader.
Note that this Help document does not describe Jarte's features as they
appear when
running in screen reader mode. It is a goal to eventually create an edition
of this document
that describes Jarte's features as they appear in screen reader mode.
Issues
Jarte will only enter screen reader mode if a recognized screen reader is
running. Jarte's title
bar will display the phrase "screen reader mode" when Jarte is running in
screen reader
mode.
If Jarte does not recognize your screen reader program then please report
the name of the
unrecognized screen reader to Jarte support to ensure the next version of
Jarte is updated
appropriately. You can force Jarte to switch to screen reader mode by
copying the phrase
"enable screen reader mode" to the Windows clipboard before starting Jarte.
This only needs
to be done one time.
If Jarte is running in screen reader mode, but it should not be, then you
can turn off screen
reader mode by copying the phrase "disable screen reader mode" to the
Windows clipboard
and then restarting Jarte. This only needs to be done one time.
If you guys have added this to the clipboard before running Jarte and it
doesn't work then please check all spelling case of letters punctuation etc.
and try again.
Example did you try with and without the quotes? I think you don't need the
quotes as I remember.
Hope this helps.
Sam
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brice Mijares
Sent: Wednesday, November 28, 2018 4:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Jarte
I don't remember if it was Jarte support or Window eyessupport that told me
I had to copy enable screen reader mode to the clipboard, then launch Jarte.
Haven't had a problem since. Maybe this problem has been resolved during the
past few years.
On 11/28/2018 2:59 PM, Gene wrote:
This has nothing to do with anyone being a know-all.� List members
should disagree if they have had other experiences or if they believe
information is incorrect.� That's one of the important points of the
list, to have members comment on topics and agree, disagree, or
present more information.� No one has reported having to do this
from personal experience on the list except you.� I am not saying
you didn't have to do it, but based on all the other messages, your
differing experience is not what should occur and there may have been
a problem with your installation of the program or some minor Windows
problem.
Gene
----- Original Message -----
*From:* Brice Mijares <mailto:bricemijares@...>
*Sent:* Wednesday, November 28, 2018 4:23 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA and Jarte

I too had the problem of my screen reader not working in Jarte until I
copied enable screen reader mode to the clipboard. So what you say is
incorrect. This was about 3 years ago. To many know it all's on this�
list.



Re: lag with MS Word

Abbie Taylor
 

I'm also noticing this, especially when braille is connected. If you're using a braille display, you might try disconnecting it to see if that makes a difference.

--
Abbie Johnson Taylor, Author
http://www.abbiejohnsontaylor.com
http://abbiescorner.wordpress.com
abbietaylor945@...


Re: i'm new to this list and have a strange issue with NVDA on the windows log on screen

molly the blind tech lover
 

thanks. i also have a regular laptop and NVDA works on the log on screen.


On Wed, Nov 28, 2018, 6:02 PM John Isige <gwynn@... wrote:
You might try waiting a bit. Even on the same machine, sometimes NVDA
starts on login, and I can input my password, and other times it runs
regular NVDA  and the utilities window comes up, where it tells you
about starting Narrator and sticky keys and stuff like that. Then I have
to hit escape a couple of times, once to get to the lock screen and once
to get back to the login screen. This is on a Windows 10 desktop and
laptop, I haven't messed with a Surface or any other Windows tablet for
that matter, so I'm really not sure what would happen if you're using
that as a touch screen and not with a keyboard hooked up to it.


On 11/28/2018 16:16, molly the blind tech lover wrote:
>
> hey guys, my name is molly and this is my first time posting here. so
> i apologize if i type in the wrong email address and this message ends
> up somewhere else.
> anyway, i have been using NVDA for 2 years and love it. i seem to be
> having a strange issue with NVDA not starting at the log on screen
> even though i've set NVDA to start at the log on screen. on my newly
> purchased surface laptop, i have NVDA set to start at the log on
> screen, where i need to enter my pin. i turn on the machine, and i
> have speech on the log on screen, asking me to sign in. but when i
> enter my pin, all i hear is it saying * * * the screen doesn't unlock.
> i also don't hear speech when i swipe around on the touchscreen. this
> indicates that the log on screen is loading before NVDA is, i end up
> having to use Narrator to log on. this is strange. do you guys have
> any ideas as to why this is happening? any suggestions would be most
> appreciated.
> cheers
> molly
>
>




Re: NVDA and Jarte

Sam Bushman
 

Hi All,

We are all just trying to do our best and help each other the best we can.
This is from the jarte manual.

34 Screen Reader Mode
Background
A screen reader is a program capable of audiblizing the text appearing on a
computer
screen for the benefit of visually impaired computer users. Microsoft's
Narrator program is
an example of a basic screen reader built into Windows. There are other more
advanced
screen reader program's available including the free NVDA program and the
popular JAWS
program.
Jarte's Screen Reader Mode
Jarte runs in a special screen reader mode if a recognized screen reader
program is already
running on the computer when Jarte is started. Jarte uses a special screen
reader friendly
interface while in screen reader mode. A number of Jarte's visually oriented
features are
removed from the interface while in screen reader mode (e.g., color related
features, interface
panels that require visual interaction, etc) to make use of Jarte more
efficient for visually
impaired users. The interfaces for other features are modified to make them
more readable
to a screen reader.
Note that this Help document does not describe Jarte's features as they
appear when
running in screen reader mode. It is a goal to eventually create an edition
of this document
that describes Jarte's features as they appear in screen reader mode.
Issues
Jarte will only enter screen reader mode if a recognized screen reader is
running. Jarte's title
bar will display the phrase "screen reader mode" when Jarte is running in
screen reader
mode.
If Jarte does not recognize your screen reader program then please report
the name of the
unrecognized screen reader to Jarte support to ensure the next version of
Jarte is updated
appropriately. You can force Jarte to switch to screen reader mode by
copying the phrase
"enable screen reader mode" to the Windows clipboard before starting Jarte.
This only needs
to be done one time.
If Jarte is running in screen reader mode, but it should not be, then you
can turn off screen
reader mode by copying the phrase "disable screen reader mode" to the
Windows clipboard
and then restarting Jarte. This only needs to be done one time.

If you guys have added this to the clipboard before running Jarte and it
doesn't work then please check all spelling case of letters punctuation etc.
and try again.

Example did you try with and without the quotes? I think you don't need the
quotes as I remember.

Hope this helps.
Sam

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brice Mijares
Sent: Wednesday, November 28, 2018 4:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Jarte

I don't remember if it was Jarte support or Window eyessupport that told me
I had to copy enable screen reader mode to the clipboard, then launch Jarte.
Haven't had a problem since. Maybe this problem has been resolved during the
past few years.
On 11/28/2018 2:59 PM, Gene wrote:
This has nothing to do with anyone being a know-all.� List members
should disagree if they have had other experiences or if they believe
information is incorrect.� That's one of the important points of the
list, to have members comment on topics and agree, disagree, or
present more information.� No one has reported having to do this
from personal experience on the list except you.� I am not saying
you didn't have to do it, but based on all the other messages, your
differing experience is not what should occur and there may have been
a problem with your installation of the program or some minor Windows
problem.
Gene
----- Original Message -----
*From:* Brice Mijares <mailto:bricemijares@...>
*Sent:* Wednesday, November 28, 2018 4:23 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA and Jarte

I too had the problem of my screen reader not working in Jarte until I
copied enable screen reader mode to the clipboard. So what you say is
incorrect. This was about 3 years ago. To many know it all's on this�
list.



Re: NVDA and Jarte

Gene
 

I tried JARTE four or five years ago and it detected a screen-reader.  If it doesn't on occasion, I don't know why.  The procedure given may work but it shouldn't be necessary.
 
Gene

----- Original Message -----
From: Andy
Sent: Wednesday, November 28, 2018 5:03 PM
Subject: Re: [nvda] NVDA and Jarte

The only thing i can think is that recent updates now allow the program to
detect that a screen reader is being used.  I am glad that it can now
accomplish this.

Andy

----- Original Message -----
From: "Brice Mijares" <bricemijares@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, November 28, 2018 2:23 PM
Subject: Re: [nvda] NVDA and Jarte


>I too had the problem of my screen reader not working in Jarte until I
>copied enable screen reader mode to the clipboard. So what you say is
>incorrect. This was about 3 years ago. To many know it all's on this  list.
>
>
>




Re: NVDA and Jarte

Brice Mijares
 

I don't remember if it was Jarte support or Window eyessupport that told me I had to copy enable screen reader mode to the clipboard, then launch Jarte. Haven't had a problem since. Maybe this problem has been resolved during the past few years.

On 11/28/2018 2:59 PM, Gene wrote:
This has nothing to do with anyone being a know-all.� List members should disagree if they have had other experiences or if they believe information is incorrect.� That's one of the important points of the list, to have members comment on topics and agree, disagree, or present more information.� No one has reported having to do this from personal experience on the list except you.� I am not saying you didn't have to do it, but based on all the other messages, your differing experience is not what should occur and there may have been a problem with your installation of the program or some minor Windows problem.
Gene
----- Original Message -----
*From:* Brice Mijares <mailto:bricemijares@...>
*Sent:* Wednesday, November 28, 2018 4:23 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA and Jarte
I too had the problem of my screen reader not working in Jarte until I
copied enable screen reader mode to the clipboard. So what you say is
incorrect. This was about 3 years ago. To many know it all's on this� list.


Re: i'm new to this list and have a strange issue with NVDA on the windows log on screen

Jonathan COHN
 

Hello Molly and welcome to the NVDA list,

 

This might depend on your actual startup options. When full disk encryption is enabled on a computer, then the operating system is not fully running when the user name is being prompted for. I am more familiar with this on Macintosh computers, but I expect the same could be happening on Windows. So, even though a sighted person sees a login screen, not all the features available in the OS can be accessed until the startup disk key is enabled.

 

To test this, try logging out of your system and seeing if NVDA then prompts you for login credentials.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of molly the blind tech lover
Sent: Wednesday, November 28, 2018 5:17 PM
To: nvda@nvda.groups.io
Subject: [nvda] i'm new to this list and have a strange issue with NVDA on the windows log on screen
Importance: Low

 

hey guys, my name is molly and this is my first time posting here. so i apologize if i type in the wrong email address and this message ends up somewhere else.
anyway, i have been using NVDA for 2 years and love it. i seem to be having a strange issue with NVDA not starting at the log on screen even though i've set NVDA to start at the log on screen. on my newly purchased surface laptop, i have NVDA set to start at the log on screen, where i need to enter my pin. i turn on the machine, and i have speech on the log on screen, asking me to sign in. but when i enter my pin, all i hear is it saying * * * the screen doesn't unlock. i also don't hear speech when i swipe around on the touchscreen. this indicates that the log on screen is loading before NVDA is, i end up having to use Narrator to log on. this is strange. do you guys have any ideas as to why this is happening? any suggestions would be most appreciated.
cheers
molly


Re: NVDA and Jarte

Andy
 

The only thing i can think is that recent updates now allow the program to detect that a screen reader is being used. I am glad that it can now accomplish this.

Andy

----- Original Message -----
From: "Brice Mijares" <bricemijares@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, November 28, 2018 2:23 PM
Subject: Re: [nvda] NVDA and Jarte


I too had the problem of my screen reader not working in Jarte until I copied enable screen reader mode to the clipboard. So what you say is incorrect. This was about 3 years ago. To many know it all's on this list.


Re: i'm new to this list and have a strange issue with NVDA on the windows log on screen

John Isige
 

You might try waiting a bit. Even on the same machine, sometimes NVDA
starts on login, and I can input my password, and other times it runs
regular NVDA  and the utilities window comes up, where it tells you
about starting Narrator and sticky keys and stuff like that. Then I have
to hit escape a couple of times, once to get to the lock screen and once
to get back to the login screen. This is on a Windows 10 desktop and
laptop, I haven't messed with a Surface or any other Windows tablet for
that matter, so I'm really not sure what would happen if you're using
that as a touch screen and not with a keyboard hooked up to it.

On 11/28/2018 16:16, molly the blind tech lover wrote:

hey guys, my name is molly and this is my first time posting here. so
i apologize if i type in the wrong email address and this message ends
up somewhere else.
anyway, i have been using NVDA for 2 years and love it. i seem to be
having a strange issue with NVDA not starting at the log on screen
even though i've set NVDA to start at the log on screen. on my newly
purchased surface laptop, i have NVDA set to start at the log on
screen, where i need to enter my pin. i turn on the machine, and i
have speech on the log on screen, asking me to sign in. but when i
enter my pin, all i hear is it saying * * * the screen doesn't unlock.
i also don't hear speech when i swipe around on the touchscreen. this
indicates that the log on screen is loading before NVDA is, i end up
having to use Narrator to log on. this is strange. do you guys have
any ideas as to why this is happening? any suggestions would be most
appreciated.
cheers
molly


Re: NVDA and Jarte

Gene
 

This has nothing to do with anyone being a know-all.  List members should disagree if they have had other experiences or if they believe information is incorrect.  That's one of the important points of the list, to have members comment on topics and agree, disagree, or present more information.  No one has reported having to do this from personal experience on the list except you.  I am not saying you didn't have to do it, but based on all the other messages, your differing experience is not what should occur and there may have been a problem with your installation of the program or some minor Windows problem. 
 
Gene

----- Original Message -----
Sent: Wednesday, November 28, 2018 4:23 PM
Subject: Re: [nvda] NVDA and Jarte

I too had the problem of my screen reader not working in Jarte until I
copied enable screen reader mode to the clipboard. So what you say is
incorrect. This was about 3 years ago. To many know it all's on this  list.



i'm new to this list and have a strange issue with NVDA on the windows log on screen

molly the blind tech lover
 

hey guys, my name is molly and this is my first time posting here. so i apologize if i type in the wrong email address and this message ends up somewhere else.
anyway, i have been using NVDA for 2 years and love it. i seem to be having a strange issue with NVDA not starting at the log on screen even though i've set NVDA to start at the log on screen. on my newly purchased surface laptop, i have NVDA set to start at the log on screen, where i need to enter my pin. i turn on the machine, and i have speech on the log on screen, asking me to sign in. but when i enter my pin, all i hear is it saying * * * the screen doesn't unlock. i also don't hear speech when i swipe around on the touchscreen. this indicates that the log on screen is loading before NVDA is, i end up having to use Narrator to log on. this is strange. do you guys have any ideas as to why this is happening? any suggestions would be most appreciated.
cheers
molly


Re: Another problem.

Gene
 

That's more evidence supporting the possibility of adware.  I don't know if ad blockers block ads from adware but I think you should investigate further.  Other list members will likely discuss other programs to run to see if you have adware.  I haven't used enough to discuss the subject much.
 
Gene

----- Original Message -----
From: MAX
Sent: Wednesday, November 28, 2018 3:28 PM
Subject: Re: [nvda] Another problem.

Thank you Brian.

 

I now have it installed, I think, and time will tell if it is and it works.  I get ads when I click on a link in an email message.  So I’ll have to wait for one to test it.

 

 

73 (Regards).

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, November 28, 2018 12:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Another problem.

 

Get an ad blocker extension.  My preferred one is uBlock Origin.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 


Re: Another problem.

Gene
 

You said once before that that is the only browser that happens in.  What home page are you using?  Do you have Chrome to only show the home page or to show other pages? 
 
Also, you didn't say whether you see popups on other sites that you don't see when using other browsers.  I suspect Chrome has some sort of adware. 
 
Gene

----- Original Message -----
From: MAX
Sent: Wednesday, November 28, 2018 3:09 PM
Subject: Re: [nvda] Another problem.

I’m running Malware Bytes and I am not signed into Google.

 

 

73 (Regards).

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Wednesday, November 28, 2018 12:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Another problem.

 

Are you signed into Chrome?  I don't know if that makes a difference.  I'm not signed in to Chrome with the Chrome browser and I get no ads.  Also, I'm suspicious that that is adware.  Are you running any sort of antimalware programs? 

 

Gene

----- Original Message -----

From: MAX

Sent: Wednesday, November 28, 2018 12:08 PM

To: NVDA

Subject: [nvda] Another problem.

 

Switching to Google chrome solved my problem with the help file but I am
now getting pop up ads whenever chrome opens.  Is there any way to turn
them off?


73 (Regards).

Max.  K 4 O DS.

I've Never Lost the Wonder.

Email: max@...

Vacuum Tube  Site: http://www.angelfire.com/electronic/funwithtubes/
Transistor site: http://www.angelfire.com/planet/funwithtransistors/
Woodworking site:
http://www.angelfire.com/electronic/funwithtubes/Woodworking/wwindex.html
Music site: http://www.maxsmusicplace.com

To subscribe to the fun with transistors group send an email to.
Funwithtransistors+subscribe@groups.io

To subscribe to the fun with tubes group send an email to,
funwithtubes+subscribe@groups.io

To subscribe to the fun with wood group send a blank email to
funwithwood+subscribe@groups.io




Re: NVDA and Jarte

Brice Mijares
 

I too had the problem of my screen reader not working in Jarte until I copied enable screen reader mode to the clipboard. So what you say is incorrect. This was about 3 years ago. To many know it all's on this list.


Re: Another problem.

MAX <max@...>
 

Hi again Brian.

 

I found a message in the recycle bin and tested it.  Before when I clicked the link nvda said alert, alert, alert, and the add popped up.  This time nvda also sounded the alert but nothing popped up.  I guess it works.   Thanks again.

 

 

73 (Regards).

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of MAX
Sent: Wednesday, November 28, 2018 3:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Another problem.

 

Thank you Brian.

 

I now have it installed, I think, and time will tell if it is and it works.  I get ads when I click on a link in an email message.  So I’ll have to wait for one to test it.

 

 

73 (Regards).

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, November 28, 2018 12:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Another problem.

 

Get an ad blocker extension.  My preferred one is uBlock Origin.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back