Date   

Re: Problem installing latest update

Travis Siegel <tsiegel@...>
 

Lucky you. My windows does not play any sound when the UAC dialog appears. I don't know if previous versions of windows made such a sound, but my 8.1 and my win10 make no sound when the dialog shows up, it just blanks the screen, which I can see, because the scren goes dark, then after I press the alt-y (once or twice depending), then the screen gets light again, so that's the way I manage it. If I wait long enough, I believe it does speak the contents, but that takes so long, that by the time it starts talking, I could have been back to what I was doing already, so there's no point to wait for the speech.

On Mon, 17 Dec 2018, Gene wrote:

In Windows 7, UAC always plays a sound when it comes up.  I would think that
would be the case in
Windows 10 as well.  Even if a screen-reader doesn't read it until you do
certain things to cause it to read, if you listen for the sound when you
begin to do something such as install something that is expected to cause
UAC to come up, that would, I would think, make things easier and faster. 
If you hear the sound, you shouldn't have to do anything, whether your
screen-reader reads the dialog or not, except to issue the command alt y.  I
use NVDA on my Windows 7 machine as a portable program.  It can't read the
UAC command for technical reasons I won't go into here and don't completely
know.  But the sound plays every time.  I just answer alt y. 
 
Gene
------ Original Message -----
From: Travis Siegel
Sent: Monday, December 17, 2018 7:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem installing latest update
For what it's worth, I had to answer alt-y to the security dialog twice.
I don't know if it's because it didn't take the first time, or if it jut
needed two yes responses, but I suspect it's the first option, because
I've had that issue before.  I can't see much, but I can tell when the
security screen comes up, because it's dark, and the rest of my screens
are very light, so when it comes, I hit alt-y, and away it goes, but
perhaps I hit alt-y too early, so had to do it again, but that was the
only trouble I had installing NVDA 2018.4.  It was a bit slow at first,
until I closed VLC, after that, it rturned to normal response times.
Don't know if it's a result of it just being VLC, or if it was a result of
my having had that particular copy of VLC open for nearly a week on this
machine, and it was just being a resource hot at that point, but
regardless of the reason, it behaved normally after I closed it, so there
itis for what it's worth. I haven't tried reopening VLC just yet, as I'm
not ready to continue reading that particular book.
On Tue, 18 Dec 2018, Quentin Christensen wrote:

Hi Janet,
As Joseph asked, did you get the UAC dialog asking if you want to allow
the
program to make changes to your PC?  If you aren't seeing the UAC dialog,
or
aren't responding to it, that would generate a log like the one you
included.  See Joseph's message for a workaround.

Kind regards

Quentin.

On Tue, Dec 18, 2018 at 12:00 PM Joseph Lee <joseph.lee22590@gmail.com>
wrote:

       Hi,

       Hmmm, did you get any User Account Control prompt at all?
       Sometimes, attempting an install after logging out and back in
       resolves this and should give you a chance to say “Yes” when UAC
       screen spears.

       Cheers,

       Joseph

        

       From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of
       Janet Brandly
       Sent: Monday, December 17, 2018 4:55 PM
       To: nvda@nvda.groups.io
       Subject: [nvda] Problem installing latest update

 

Hello again Quentin,

 

Below is a copy of what the log viewer says.

 

Janet

 

INFO - __main__ (17:36:16.924):

Starting NVDA

INFO - core.main (17:36:17.285):

Config dir: C:\Users\Janet\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (17:36:17.285):

Loading config: C:\Users\Janet\AppData\Roaming\nvda\nvda.ini

INFO - core.main (17:36:17.332):

NVDA version 2018.4

INFO - core.main (17:36:17.332):

Using Windows version 10.0.17134 workstation

INFO - core.main (17:36:17.332):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018,
16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (17:36:17.332):

Using comtypes version 1.1.3

INFO - core.main (17:36:17.332):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDriverHandler.setSynth (17:36:18.848):

Loaded synthDriver oneCore

INFO - core.main (17:36:18.855):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (17:36:18.865):

Braille input initialized

INFO - braille.initialize (17:36:18.865):

Using liblouis version 3.7.0

INFO - braille.BrailleHandler.setDisplayByName (17:36:18.865):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (17:36:18.966):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:36:18.996):

UIAutomation: IUIAutomation5

INFO - core.main (17:36:19.979):

NVDA initialized

ERROR - gui.installerGui.doInstall (17:40:34.710):

Failed to execute installer

Traceback (most recent call last):

  File "gui\installerGui.pyo", line 32, in doInstall

  File "config\__init__.pyo", line 209, in execElevated

  File "shellapi.pyo", line 42, in ShellExecuteEx

WindowsError: [Error 1223] The operation was canceled by the user.

ERROR - gui.installerGui.doInstall (17:40:34.759):

Installation failed: [Error 1223] The operation was canceled by the
user.

       

From: Quentin Christensen

Sent: Monday, December 17, 2018 3:41 PM

To: nvda@nvda.groups.io

Subject: Re: [nvda] Problem installing latest update

 

Hi Janet,

 

We'll need a bit more information to help you.  One of the most common
reasons is that when you run the installer, it brings up a User
Account Control (UAC) dialog.  The dialog warns that the program wants
to make changes to your PC and you must accept it to continue.  That's
a standard Windows warning when you install any software, but
occasionally it appears behind other windows.  If the program is
installing (the progress bar is beeping) but you haven't answered that
dialog yet, try using ALT+TAB to find it (if it doesn't appear on top
of everything, it often appears at the back, as in the last window in
the list when you ALT+TAB).  If you don't respond to it within about
20 seconds, it will close and the install will fail.

 

Kind regards

 

Quentin.

 

On Tue, Dec 18, 2018 at 6:42 AM Janet Brandly <jbrandly@shaw.ca>
wrote:

       Hello all, especially NVDA Support,

 

I’m having a problem with the latest update. It seemed to
download OK after I got the prompt, but it wouldn’t install. It
asked me to review the log view which I did, but it doesn’t make
any sense to me. I looked for the software in my download folder
to install it manually, but it wasn’t there. Any help with this
would be much appreciated.

 

Thank you,

 

Jan

 

 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available:
http://www.nvaccess.org/shop/

 

www.nvaccess.org 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification
now available: http://www.nvaccess.org/shop/

www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



Re: Season's greetings

Mallard
 

From Italy as well... And Happy New Year too, ad Happy whatever people on this list celebrate!

Ciao,

Ollie

Il 18/12/2018 11:30, Cearbhall O'Meadhra ha scritto:

Happy Christmas, Quentin and everyone on the list.

All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@blbc.ie

*From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Quentin Christensen
*Sent:* Monday, December 17, 2018 11:15 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] Season's greetings

Thank you Clive,

And a Merry Christmas to you and everyone on the list from NV Access and myself as well!

Quentin.

On Tue, Dec 18, 2018 at 9:51 AM Clive Pallett <clive.pallett@ptplace.co.uk <mailto:clive.pallett@ptplace.co.uk>> wrote:

Hello everyone,

Wishing you all on the list all the best for the season, whatever
your celebrations.

Best wishes,

Clive Pallett


--

Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

www.nvaccess.org <http://www.nvaccess.org/>

Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess


Re: Vanbasco Karaoke

Brian's Mail list account <bglists@...>
 

I've actually never heard of the software myself. Were you going to use it in a Christmas party?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Annamaria" <annamaria6776@tiscali.it>
To: <nvda@nvda.groups.io>
Sent: Tuesday, December 18, 2018 3:01 PM
Subject: [nvda] Vanbasco Karaoke


Hi everyone,

I can't use this program with Nvda.

I can not remove the trace of the melody.

Is there an addon about it?

Thank you.

Regards.


Annamaria



Re: how far we have came

Brian's Mail list account <bglists@...>
 

Its also nowhere near as frustrating as I am finding my mew and first smart phone which persists in turning off voiceover for no good reason and claiming its on. Thank goodness nvda does not do that!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Don H" <lmddh50@adams.net>
To: <nvda@nvda.groups.io>
Sent: Tuesday, December 18, 2018 2:54 PM
Subject: [nvda] how far we have came


I am old enough to have spent the first half of my career in Engineering before computers. Got my first PC in 1987. Had to laugh at myself this morning because I was getting flustrated by trying to get the use of Emojis to work consistently when backin 1987 it was sometimes difficult to get anything computer to work consistently. If the only thing I have to be flustrated about is the use of Emojis things in my computer world must be pretty darn good. Thanks goes to all the developers of NVDA.



Re: Hello/Still Noticing Slight Performance Decrease When Navigating with NVDA 2018.4

Brian's Mail list account <bglists@...>
 

Well I do not use tbird or chrome.

I'm not quite sure what might cause this really though.
Its not something they have supposedly messed with from reading the what's new.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "David Goldfield" <david.goldfield@outlook.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, December 18, 2018 2:06 AM
Subject: [nvda] Hello/Still Noticing Slight Performance Decrease When Navigating with NVDA 2018.4


My guess is that nobody else is experiencing this issue as I'm seeing no other posts about this.

When I navigate by links with K or shift K in Thunderbird and even, to an extent, in Chrome I notice a slight slowdown in responsiveness compared to 2018.3. For a short time I thought it was my computer as I was sometimes seeing this occur in 2018.3.2 but, in general, 2018.3.2 is still somewhat faster. I sent Quentin a debug file with all addons disabled but I'm assuming there was nothing obvious in the output as I haven't heard back. I notice this with Espeak. On a faster machine I do not notice this but on a slower Athlon 2.9 GHZ there is a slight but noticeable difference. Just wondering if anybody has noticed this and if something changed in the code regarding navigation?

--
David Goldfield, Assistive Technology Specialist WWW.David-Goldfield.Com<http://WWW.David-Goldfield.Com>



Re: dectalk express u s b

Isaac <bigikemusic@...>
 


Thank you

----- Original Message -----
From: larry k
Sent: Tuesday, December 18, 2018 9:19 AM
Subject: Re: [nvda] dectalk express u s b

yes, from axol.com       
 
From: Isaac
Sent: Tuesday, December 18, 2018 07:14
Subject: Re: [nvda] dectalk express u s b
 
Can one still purchase a dectalk usb?
----- Original Message -----
From: larry k
Sent: Monday, December 17, 2018 8:27 PM
Subject: [nvda] dectalk express u s b
 
it seems that it will work using the serial port using an adapter from u s b, but it will not work directly from a u s b connection.
I wish someone would correct this as I’d like to use the dectalk
larry


Re: dectalk express u s b

larry k <sirlaurence.larry@...>
 

yes, from axol.com       

From: Isaac
Sent: Tuesday, December 18, 2018 07:14
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b
 
Can one still purchase a dectalk usb?
----- Original Message -----
From: larry k
To: nvda@nvda.groups.io
Sent: Monday, December 17, 2018 8:27 PM
Subject: [nvda] dectalk express u s b
 
it seems that it will work using the serial port using an adapter from u s b, but it will not work directly from a u s b connection.
I wish someone would correct this as I’d like to use the dectalk
larry


Vanbasco Karaoke

Annamaria
 

Hi everyone,

I can't use this program with Nvda.

I can not remove the trace of the melody.

Is there an addon about it?

Thank you.

Regards.


Annamaria


how far we have came

Don H
 

I am old enough to have spent the first half of my career in Engineering before computers. Got my first PC in 1987. Had to laugh at myself this morning because I was getting flustrated by trying to get the use of Emojis to work consistently when backin 1987 it was sometimes difficult to get anything computer to work consistently. If the only thing I have to be flustrated about is the use of Emojis things in my computer world must be pretty darn good. Thanks goes to all the developers of NVDA.


Re: OCR

Giles Turnbull
 

At £99 in the UK, it isn't cheap, but I've used ABBYY Fine Reader 12 for three years and love it. My only wish is that it would OCR to something other than Word ... I use Office so that's not a problem, but just OCRing to plain text is, in most cases, all I need to do.

Giles


Re: Reading emoticons and Kazakh language for eSpeak NG

Adil Uralbaev <adiluralbaev@...>
 

I also noticed that some emoticons are pronounced only when if you
move the cursor arrows on it, as if you want to read the previous or
the next character. And if you read, using the up and down arrows,
they are not pronounced, only the word "Graphics" is pronounced.

2018-12-18 15:07 GMT+03:00, Adil Uralbaev via Groups.Io
<adiluralbaev=gmail.com@groups.io>:

Hi!
Smileys are not pronounced on sites. I noticed this when I
corresponded on social networks. I would like this bug to be fixed.
In the version of NVDA 2018.3.2 everything worked.

2018-12-18 14:45 GMT+03:00, Quentin Christensen <quentin@nvaccess.org>:
Hi Adil,

Could you give an example of an emoji that isn't working, or a page that
has one etc?

When you say in the previous version, could you please confirm, do you
mean
2018.3.2, or one of the alpha / beta / rc releases?

On Tue, Dec 18, 2018 at 10:13 PM Adil Uralbaev <adiluralbaev@gmail.com>
wrote:

Hello.
Speech synthesizers do not pronounce some smilies that are written in
Unicode. In the previous version there were no such problems.
Everything was read correctly.
And I want to thank you for the support of the Kazakh language for
eSpeak NG. I hope you will continue to work on this language.
Waiting for fixis in reading emoticons.
Thanks!
Sincerely, Adil.



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available:
http://www.nvaccess.org/shop/

www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess






Re: dectalk express u s b

Isaac <bigikemusic@...>
 


Can one still purchase a dectalk usb?

----- Original Message -----
From: larry k
Sent: Monday, December 17, 2018 8:27 PM
Subject: [nvda] dectalk express u s b

it seems that it will work using the serial port using an adapter from u s b, but it will not work directly from a u s b connection.
I wish someone would correct this as I’d like to use the dectalk
larry


Re: Keystroke for on-the-fly reading and interacting with Windows10 alerts?

Gerardo Corripio
 

And what is about a batch command file command? this sounds like something I’d like to try. I imagine it’s compatible with NVDA as well? and with both 32 and 64 bytes Windows?

Gera
Enviado desde mi iPhone SE de Telcel

El 18 dic 2018, a la(s) 3:49 a. m., Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io> escribió:

This is a relative new mess Dropbox has created. Ther buttons do not show up and the message itself is seldon one alt tab away from where you are. All I do know though is that if you delete stuff with a command file ie batch file this problem never arrises.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Gerardo Corripio" <gera1027@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, December 17, 2018 12:58 PM
Subject: [nvda] Keystroke for on-the-fly reading and interacting with Windows10 alerts?


Might there be an NVDA keystroke, or AddOn I’m not aware of, that’ll let me go on the fly to an alert (Dropbox for instance, when it asks if you want to remove the file or files from everywhere during a deleting of)? Shift+Alt+tab and Alt+Tab to try and get to these alerts can sometimes be a hit and miss affaire. Thanks for info.

Enviado desde Correo para Windows 10





Re: added some applications to the wiki

 

At some point, I will fork this wiki and make my own open sourced wiki with categories like, communication, tools, and otherwise. But Github is not really designed for making websites, so, as of now, your page is the easiest. I like github because I can just sign in and edit whenever I see something that needs editing on someone elses page. LOL!


Re: Reading emoticons and Kazakh language for eSpeak NG

Adil Uralbaev <adiluralbaev@...>
 

Hi!
Smileys are not pronounced on sites. I noticed this when I
corresponded on social networks. I would like this bug to be fixed.
In the version of NVDA 2018.3.2 everything worked.

2018-12-18 14:45 GMT+03:00, Quentin Christensen <quentin@nvaccess.org>:

Hi Adil,

Could you give an example of an emoji that isn't working, or a page that
has one etc?

When you say in the previous version, could you please confirm, do you mean
2018.3.2, or one of the alpha / beta / rc releases?

On Tue, Dec 18, 2018 at 10:13 PM Adil Uralbaev <adiluralbaev@gmail.com>
wrote:

Hello.
Speech synthesizers do not pronounce some smilies that are written in
Unicode. In the previous version there were no such problems.
Everything was read correctly.
And I want to thank you for the support of the Kazakh language for
eSpeak NG. I hope you will continue to work on this language.
Waiting for fixis in reading emoticons.
Thanks!
Sincerely, Adil.



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available:
http://www.nvaccess.org/shop/

www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess




Re: Advantages of NVDA over narrator on public terminals

erik burggraaf <erik@...>
 

Congratulations! That is an outstanding accomplishment.

On December 18, 2018 1:55:34 AM "hurrikennyandopo ..." <hurrikennyandopo@...> wrote:

Hi guys,


I received confirmation a couple of days ago that NVDA was going to be installed across the Christchurch City library network. Today, I have just received confirmation via email from the person rolling it out that it has officially been rolled out! I thought it was going to be rolled out early next year, but it looks like an early Christmas present for Christchurch!

There are parts of the message below:

So … the install of NVDA version 2018.3.2 is completed on our public computers.


I aI’m happy to tell you that we have 19 libraries which all have at least one free internet computer each;

·      A total of 225 free internet computers across the Christchurch City Libraries network

In addition to this we have the following types of public computers which we will also install NVDA on as part of the rollout

·      20 Childrens PCs; 30 Family History PCs; 120 Learning Centre Lab PCs


This means that NVDA is now installed at 19 libraries across Christchurch! (This is about 390 computers which are to be updated annually from now on).

https://my.christchurchcitylibraries.com/faq/computers/#faq_5895


In the link to the FAQ page (which says about accessibility options on their computers), NVDA is now on that list! You can not start it with a shortcut, however you can still start it quite easily through the search box by typing in NVDA and pressing Enter. The Windows log on option has been disabled. This is where it says Use NVDA on the Windows logon screen.


Please spread the word if you know of anyone who would find this useful when visiting Christchurch City Libraries! This is not just for blind and vision impaired, but may also assist people who have dyslexia or are ESOL.


Regards,

Gene NZ


On 22/10/2018 1:43 AM, Brian's Mail list account via Groups.Io wrote:
Yes and the very first incarnation was put together by an Ex Dolphin writer.
I think the problem is that Microsoft are  concentrating on their software, having no control over the actual software in use. They would then be playing catch up just like the other screenreaders on 3rd party applications.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Sky Mundell" <skyt@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, October 21, 2018 7:14 AM
Subject: Re: [nvda] Advantages of NVDA over narrator on public terminals


True, although Doug Geoffray, the guy behind the EX Window-Eyes is working on Narrator actually along with Jeff bishop, a former Window-Eyes scripter, and others.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, October 20, 2018 11:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Advantages of NVDA over narrator on public terminals



Narrator in Windows 10 is considerably more capable from discussions I've seen here than Narrator on Windows 7.  I have Windows 7.  Narrator is just the shell of a screen-reader in that version of Windows, alright for emergencies where you lose the use of a competent screen-reader for some reason but it would be next to useless on a public terminal because it is next to useless everywhere.



also, I know that Narrator is moving toward using more standard screen-reader commands in Windows 10.  I don't know how far that move has gone but I would think that a lot more screen-reader users would regularly use NVDA.  There is a certain level of reasonable access and reasonable standardization and unless Narrator has changed very dramatically recently in Windows 10, it doesn't meet those needs.  Plus, from discussions I've seen here, Narrator is limited to Microsoft programs in terms of providing reasonable or something like reasonable access.  Unless these public terminals provide only Microsoft programs, that is another area of inaccessibility when using Narrator.  The blind user would be either fully or mostly limited to Microsoft programs on the machine.  If the machine has other programs on it, it appears from discussions I've seen on list, that Narrator wouldn't work adequately, if at all.



Gene

----- Original Message -----

From: hurrikennyandopo ... <mailto:hurrikennyandopo@...>

Sent: Sunday, October 21, 2018 12:31 AM

To: nvda@nvda.groups.io

Subject: [nvda] Advantages of NVDA over narrator on public terminals



Hi guys,



I got asked this question about the advantages of NVDA over Narrator on public terminals where ever these may be...



I am talking about public terminals that the sighted can use where ever these may be. Places like libraries, information centres airports (where these terminals are) as well etcetera. The commercial screen readers are not in the picture because of price.



The question is below:



" My question to you is what advantages would it give our blind or visually impaired customers having both Windows 10 Narrator and NVDA available to use on public computers? I would be interested in supporting installing it at if there were advantages and we could work thru any technical issues. Let me know what you think".



This same question could also come up at any IT department that is approached to install NVDA to a public terminal (where ever these may be). The above is used as an example.

I am guessing that for any technical information - that could be pointed towards the developers of the NVDA project.



They could be using a windows 7 machine right up to Windows 10.



Looking forward to your feedback on advantages of NVDA over Narrator. Thanks everyone.



Gene NZ





--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Reading emoticons and Kazakh language for eSpeak NG

Quentin Christensen
 

Hi Adil,

Could you give an example of an emoji that isn't working, or a page that has one etc?

When you say in the previous version, could you please confirm, do you mean 2018.3.2, or one of the alpha / beta / rc releases?

On Tue, Dec 18, 2018 at 10:13 PM Adil Uralbaev <adiluralbaev@...> wrote:
Hello.
Speech synthesizers do not pronounce some smilies that are written in
Unicode. In the previous version there were no such problems.
Everything was read correctly.
And I want to thank you for the support of the Kazakh language for
eSpeak NG. I hope you will continue to work on this language.
Waiting for fixis in reading emoticons.
Thanks!
Sincerely, Adil.





--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: dectalk express u s b

larry k <sirlaurence.larry@...>
 

speech synth doesn't show up in th e list.
so can't give report on log viewer..

-----Original Message-----
From: Tyler Spivey
Sent: Monday, December 17, 2018 20:46
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b

What errors do you get when you load the synth?
Does anything show up at the end of the log (accessed with log viewer
after you load it)?

On 12/17/2018 6:27 PM, larry k wrote:
it seems that it will work using the serial port using an adapter from u
s b, but it will not work directly from a u s b connection.
I wish someone would correct this as I’d like to use the dectalk
larry


Reading emoticons and Kazakh language for eSpeak NG

Adil Uralbaev <adiluralbaev@...>
 

Hello.
Speech synthesizers do not pronounce some smilies that are written in
Unicode. In the previous version there were no such problems.
Everything was read correctly.
And I want to thank you for the support of the Kazakh language for
eSpeak NG. I hope you will continue to work on this language.
Waiting for fixis in reading emoticons.
Thanks!
Sincerely, Adil.


Re: dectalk express u s b

larry k <sirlaurence.larry@...>
 

I get no errors, as far as the log viewer, I'll check it out

-----Original Message-----
From: Tyler Spivey
Sent: Monday, December 17, 2018 20:46
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b

What errors do you get when you load the synth?
Does anything show up at the end of the log (accessed with log viewer
after you load it)?

On 12/17/2018 6:27 PM, larry k wrote:
it seems that it will work using the serial port using an adapter from u
s b, but it will not work directly from a u s b connection.
I wish someone would correct this as I’d like to use the dectalk
larry