Date   

2016.2.1

Jenine Stanley
 

Sadly, this new update didn’t effect my issue with web pages at all, not that it was supposed to do so, but I was hopeful.

I too don’t use the grammar feature but I love the spell check sound. Saves me a lot of time on email creation.
Jenine Stanley
dragonwalker64@gmail.com


Question about NVDAs sound affects

Greg Wocher
 

Hello,

Is it possible to turn down the volume of the sound affects? The reason I ask is that I received a tip from BlindBargains that if I turn down the volume in NVDAs preferences it might help with the crackling in the Code Factory Eloquence. I did this and it did work. After doing this I need to turn up my computers volume a bit to hear NVDA. This makes the volume of the synth okay but the volume of the sound affects is now very loud and jarring.


Regards,

Greg WOcher


Re: espeak n g no good it sneezes on some words

Pete <emac00@...>
 

It is in nvda 2016 versions

On 6/10/2016 7:03 AM, nasrin khaksar wrote:
by the way, who can send me a direct link of downloading espeak ng?
i appreciate your help and god bless you all.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:
Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.






Re: espeak n g no good it sneezes on some words

Kevin Cussick
 

respect, I used to be able to use espeak at 30% with the rate boost on but I have used vocaliser for some years now and I am now trying espeak again, I am running at 85% with no boost at this time at some point might be able to run with the speech boost on.

On 10/06/2016 12:28, Bhavya shah wrote:
Hi all,
Just quickly chiming in - I am using ESpeak NG very comfortably and
alike ESpeak with the following voice configurations:
Variants: Steph/Steph_test 1/Steph 2/Steph 3 (mostly similar)
Speech Rate: 40% with rate boost enabled, though I prefer reading
important or academic notes at 30% with rate boost enabled, but can go
up to 50% or so in places (such as a fast paced game) with whose text
messages I am acquainted or familiar to some extent already, or if
necessary
Pitch: 40
Inflection: 50
I first heard ESpeak's Max variant voice close to three years ago, and
began using it and NVDA full time almost two years ago, and my above
speech settings have been going on since a year perhaps. I hope to
build my listening speed too to compete with Jamie and others at some
point in time in the future, as Jamie uses ESpeak's Max at 55% with
rate boost enabled always, as I am informed through some of his public
interviews/podcasts. :D grin
Back to the topic though, I have found not even the subtlest of
annoyances with ESpeak NG, perhaps I find it a tad bit more
responsive, could be a misconception though, as ESpeak already was
incredibly responsive.
Thanks.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:

My first experience with a screen reader and a synthesizer was with
the apple 2 c running dos 3.3 and using textalker screenreader with an
echo synthesizer. The echo synth was fast enough at the time. The next
computer was a x t clone with 570 k ram and 40 megibite hard drive using
an old speech master board with some scripts to read things on the
screen. Clunky and slow. It was using dos. Next windows 95 came along
and I used webspeak in it for a while along with tinytalk and seekline
in dos with nettamer. Things got better with an old accent p c i s a
synth I was given and started using provox in dos.

Pete


On 6/10/2016 6:56 AM, Lenron wrote:
I can maybe understand nvda reading at 85 or 90 don't mean I wish to
read that fast. I normally keep it in the 70 to 75 range. ESpeak
sounds horrible to me.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:
Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away
set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of
nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word
stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to
100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.









Re: espeak n g no good it sneezes on some words

Bhavya shah
 

Hi all,
Just quickly chiming in - I am using ESpeak NG very comfortably and
alike ESpeak with the following voice configurations:
Variants: Steph/Steph_test 1/Steph 2/Steph 3 (mostly similar)
Speech Rate: 40% with rate boost enabled, though I prefer reading
important or academic notes at 30% with rate boost enabled, but can go
up to 50% or so in places (such as a fast paced game) with whose text
messages I am acquainted or familiar to some extent already, or if
necessary
Pitch: 40
Inflection: 50
I first heard ESpeak's Max variant voice close to three years ago, and
began using it and NVDA full time almost two years ago, and my above
speech settings have been going on since a year perhaps. I hope to
build my listening speed too to compete with Jamie and others at some
point in time in the future, as Jamie uses ESpeak's Max at 55% with
rate boost enabled always, as I am informed through some of his public
interviews/podcasts. :D grin
Back to the topic though, I have found not even the subtlest of
annoyances with ESpeak NG, perhaps I find it a tad bit more
responsive, could be a misconception though, as ESpeak already was
incredibly responsive.
Thanks.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:

My first experience with a screen reader and a synthesizer was with
the apple 2 c running dos 3.3 and using textalker screenreader with an
echo synthesizer. The echo synth was fast enough at the time. The next
computer was a x t clone with 570 k ram and 40 megibite hard drive using
an old speech master board with some scripts to read things on the
screen. Clunky and slow. It was using dos. Next windows 95 came along
and I used webspeak in it for a while along with tinytalk and seekline
in dos with nettamer. Things got better with an old accent p c i s a
synth I was given and started using provox in dos.

Pete


On 6/10/2016 6:56 AM, Lenron wrote:
I can maybe understand nvda reading at 85 or 90 don't mean I wish to
read that fast. I normally keep it in the 70 to 75 range. ESpeak
sounds horrible to me.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:
Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away
set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of
nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word
stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to
100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.








--
Warm Regards
Bhavya Shah
Using NVDA (Non Visual Desktop Access) free and open source screen
reader for Microsoft Windows
To download a copy of the free screen reader NVDA, please visit
http://www.nvaccess.org/
Using Google Talkback on Motorolla G second generation Lollipop 5.0.2
Reach me through the following means:
Mobile: +91 7506221750
E-mail id: bhavya.shah125@gmail.com
Skype id : bhavya.09


Re: Where can I find sample voices for Ocapella

Greg Wocher
 

Hello,

Its with any of the lower quality english voices as far as I can tell.


Regards,

Greg Wocher

On 6/9/2016 6:02 PM, Rui Fontes wrote:
What Colibri voice have you used?

Rui Fontes
Tiflotecnia, Lda.



-----Mensagem Original-----
De: Greg Wocher
Data: quinta-feira, 9 de junho de 2016 22:41
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Where can I find sample voices for Ocapella

Hello,

I purchased the lower quality version not to far back. I found a big
issue with this synth. When moving thru words character by character
Acapela will not read the vowels. It reads them just fine when either
doing a say all or reading by word but not when reading character by
character. I just wanted to make others aware of this when looking at
this synth. I did not purchase the higher quality so I am not sure if
that version has the same issue or not.


Regards,

Greg Wocher


On 6/9/2016 4:05 PM, Lino Morales wrote:
Subject says it all. How much is the NVDA add-on for said voices? Thanks.







Re: espeak n g no good it sneezes on some words

Pete <emac00@...>
 

My first experience with a screen reader and a synthesizer was with the apple 2 c running dos 3.3 and using textalker screenreader with an echo synthesizer. The echo synth was fast enough at the time. The next computer was a x t clone with 570 k ram and 40 megibite hard drive using an old speech master board with some scripts to read things on the screen. Clunky and slow. It was using dos. Next windows 95 came along and I used webspeak in it for a while along with tinytalk and seekline in dos with nettamer. Things got better with an old accent p c i s a synth I was given and started using provox in dos.

Pete

On 6/10/2016 6:56 AM, Lenron wrote:
I can maybe understand nvda reading at 85 or 90 don't mean I wish to
read that fast. I normally keep it in the 70 to 75 range. ESpeak
sounds horrible to me.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:
Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.






Re: espeak n g no good it sneezes on some words

 

by the way, who can send me a direct link of downloading espeak ng?
i appreciate your help and god bless you all.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:

Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:

hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.









--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: espeak n g no good it sneezes on some words

Lenron
 

I can maybe understand nvda reading at 85 or 90 don't mean I wish to
read that fast. I normally keep it in the 70 to 75 range. ESpeak
sounds horrible to me.

On 6/10/16, Pete <emac00@cogeco.ca> wrote:

Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away set
to 99% and below. Again the anoying sound starts with rate boost box
checked at 19% and goes away at 18% and below. The anoying sound is
there all the way up from it's starting point at 19% with rate boost box
checked, well atleast up to 70%. I am not sure abuv 70% with check box
checked, I can't process beyond that point. It sounds like it's still
there. I am stuck using nvda with espeak set to about 40% with rate
boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate
set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue
at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have
an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of
eSpeak (with occassionally the English voice) with rate set to 30 or
40 with rate boost and I find no problems. Or perhaps I missunderstood
you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:

hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still
trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works
a lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.









--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762


Re: Issue with focus mode in 2016.2

 

hi.
my solution is installing nvda 2015.3 on your computer.
i did not test 2015.4 and 2016.1 and dont have idea how they work.
i tested version 2016.2 in using firefox and hanged for me.
my system becomes very slow when i open two browsers together or open
many tabs in firefox.
2015.3 and even 2015.2 are great for me.
hope thats help.
thanks so much and god bless you.

On 6/10/16, Jenine Stanley <dragonwalker64@gmail.com> wrote:
I can certainly check this. Not sure what good it will do but if it could
help, I’ll take a look at my error log tomorrow.

2016.1 was fine, no such issues.
Jenine Stanley
dragonwalker64@gmail.com



On Jun 9, 2016, at 5:58 PM, Ethan <ethan8768@gmail.com> wrote:

Jenine:

I have reported this issue before with a NVDA log attached with no
solution to the NVDA list. This focus mode problem happens for me as
well with NVDA 2016.2 at work. The only solution I have is to install
NVDA 2015.3 onto your computer. Ever since 2015.4 for me it seems to
not work. NVDA 2016.2 works fine on my computer at home.

Check your NVDA error log and see if any of these lines are present
when you load a webpage: (I have NVDA set on debug logging level)
<virtualBuffers.gecko_ia2.Gecko_ia2 object at 0x059FAFD0>
ERROR - virtualBuffers.Gecko_ia2._loadBuffer
Traceback (most recent call last):
File "virtualBuffers\__init__.pyo", line 369, in _loadBuffer
WindowsError: [Error 1702] The binding handle is invalid

Thank you,

Ethan

On 6/9/16, Jenine Stanley <dragonwalker64@gmail.com> wrote:
Thanks Jacob,

I just tried this, toggling control-F6 and though it did exactly what it
was
supposed to do in terms of moving me between the search bar and the web
page
contents, it did nothing to effect focus mode with NVDA.

I’ll try anything though so never fear.
Jenine Stanley
dragonwalker64@gmail.com



On Jun 9, 2016, at 3:33 PM, Jacob Kruger <jacob@blindza.co.za> wrote:

Try one other one thing, just in case - in both IE, and firefox, ctrl +
F6
might toggle focus between address bar, and webpage contents.

As in, try hitting alt + D to focus on address bar again, and then ctrl
+
F6 to, possibly, jump to/focus on the webpage itself.

But, this might not solve the problem at all, but, is just a keystroke
combination I have used for a while with multiple screen readers to, at
times, make sure it is focused on webpage contents.

STay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Jenine Stanley"
<dragonwalker64@gmail.com>
To: <nvda@nvda.groups.io>
Sent: 09 June, 2016 8:55 PM
Subject: Re: [nvda] Issue with focus mode in 2016.2


Thanks Joseph,

I’m glad I’m not alone. I ahve seen some improvement when tabbing
around
some web sites but unfortunately, not many. If the site has a lot of
places that would trigger focus mode, it doesn’t tend to work.

I’m all ears for any ways to deal with this as I’m effectively shut out
of
browsing, reading or tasks for my job, on the Windows machine anyway.
Jenine Stanley
dragonwalker64@gmail.com



On Jun 9, 2016, at 2:44 PM, Joseph Lee <joseph.lee22590@gmail.com>
wrote:

Hi,
We have reports of this happening to users (you are not alone). Sounds
like somehow browse mode routine (specifically, the behind the scenes
routine of browse mode) is failing somehow. When this happens, try
tabbing around (I found that it works for some websites where it'll
take
a long time for NVDA to render browse mode).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Jenine Stanley
Sent: Thursday, June 9, 2016 10:24 AM
To: nvda@nvda.groups.io
Subject: [nvda] Issue with focus mode in 2016.2

Apologies in advance for the length of this post. I downloaded the
latest
version of NVDA the day it came out and began to notice right away that
I
was having a problem with focus mode when opening web pages.

My sistem is as follows:

Windows 7 latest updates
Web browsers: Internet Explorer 11 and Firefox

All of my other programs have no issues with NVDA.

Here’s what happens when I open a web page.

Nothing is announced until I alt-tab away from the page. then the
title
of the page is announced but the word “document” is after the title of
the web page.

Focus mode appears to be on.

Here’s what I’ve done.

1. toggled Focus Mode with NVDA-space. with no effect and no speech or
sound with each toggle 2. Hit escape several times with no speech,
audio
or change.
3. Made sure the numlock key was off, toggled it on and off again.
This
function spoke but had no effect on Focus Mode.
4. Left the web page and tried focus mode in another app, Outlook
2007,
worked as normal.
5. Tried both browsers, same result, Focus Mode locked.
6. Updated Windows7, IE and Firefox. Restarted computer, no change.
7. downloaded and stalled a new version of NVDA over the old one.
Restarted computer, no change.
8. Removed NVDA and reinstalled the version I’d downloaded, all
mentioned
versions are current btw. No change.
9. I even tried Window-Eyes to see if it was my computer. No,
Window-Eyes
worked fine on both browsers.

I then looked at the settings for browsers but didn’t understand
several
of them. I tried toggling them on/off and testing web pages but no
change.

Any idea what’s going on here?

Thanks for any advice you can give.
Jenine Stanley
dragonwalker64@gmail.com





















--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: espeak n g no good it sneezes on some words

Pete <emac00@...>
 

Hi Sukil

ok, I hear the anoying sound with rate set to 100%. It goes away set to 99% and below. Again the anoying sound starts with rate boost box checked at 19% and goes away at 18% and below. The anoying sound is there all the way up from it's starting point at 19% with rate boost box checked, well atleast up to 70%. I am not sure abuv 70% with check box checked, I can't process beyond that point. It sounds like it's still there. I am stuck using nvda with espeak set to about 40% with rate boost checked now. I feal like my computer is running on malassis.

The nvda settings are default except for the rate boost and the rate set high.

That would be greatly appriciated your filing this on github!

Thanks Pete

On 6/10/2016 4:43 AM, Sukil Etxenike via Groups.io wrote:
Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of eSpeak (with occassionally the English voice) with rate set to 30 or 40 with rate boost and I find no problems. Or perhaps I missunderstood you, and you use different parameteres.


RegardsSukil



El 09/06/2016 a las 13:12, Pete escribió:

hi

I all ways used the default nvda max english voice, I am disappointed in the changes made to espeak in nvda I think starting with nvda 2015 or may be as far back as 2014. Were the changes made to espeak by nvda devel or the creator of espeak. I would like a choice in nvda setup to be able to pick witch espeak to install. I feal the need for speed quite freequently and to have that fluttering sound in there when the check box for rate boost is checked so I can get up to a 600 to 800 words per min is disruptive. I am still trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works a lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.






Re: espeak n g no good it sneezes on some words

Pete <emac00@...>
 

Hi

Your settings and your reasoning is perfectly fine. You will get no argument from me.

Try setting the rate to 19 or 20 and check the rate boost box. You should be able to hear what wrecks my enjoyment of speed reading. There is an extra sound there kind of like a squeal or like a hammer hitting a saw, a wavering sound. I hear it when going from 99% to 100% with no rate boost checked and again I can hear it when going from 18% to 19% with the rate boost box checked.

Also, btw the espeak player does the same thing, I thought it was fixed but I didn't find out until I checked the rate boost box. I have a sapi 4 version of eloquence with window eyes, but can't stand some of the ways it says abriviations or what it thinks are abriviations. I like espeak because it has a thin voice. I don't like eloquence and vocalizer and others because they have a fat lumpy sounding voice. I like a moderate bit of inflection but find more and more inflection slows down the perception of the spoken word. I don't want to have to think about what the synthesizer is saying. I know, I know, a matter of preference, may be my hearing is wacked or some thing. It's kind of like the booming base some cars have. I like base I don't like fat lumpy base. I prefere range over loudness. Like most add-on sub woofers only go as low as 45 heirtz, who needs that? Most good quality speakers go down to 45 heirtz. I like to hear the low A 0 and the highest A notes equally. I am just pickey that way.

Pete

On 6/10/2016 3:40 AM, Sharni-Lee Ward wrote:
The reason I have it at default speed is it sounds as close to natural
as a synth can. That's also why I have inflection set to 100. I can't
bear synths without an inflection setting because I've been rather
spoiled by espeak. I tried Vocaliser two years ago and just couldn't
take it because however humanlike the voices sounded, they were also
more robotic-sounding to me than espeak with max inflection. Two of the
voices I used were also a bit on the slow side, but adjusting rate
didn't help matters.


I honestly can't stand hearing screen-readers going faster than my
settings in tutorials. I understand time constraints but that wouldn't
make me ramp up the speed.
On 10/06/2016 5:00 PM, Pete wrote:
hi

I have been using screen readers since 95 in windows except for an
old apple 2 e in the late 80s with textalker.


I do slow down first thing in the morning, uncheck the rate boost
and set speed to 100 % .

To me nvda set to 30 % sounds like if you set yours to 0 % or slower.

I am just used to it fast.

Pete



On 6/9/2016 11:14 PM, Sharni-Lee Ward wrote:
... How can anyone understand what's being read or enjoy what they're
reading at such outrageous speeds? I've never changed NVDA from its
default rate with espeak. And how can you even tell there's fluttering
if the synth is yammering on so fast you can barely make out the words?
I just tested it and I can't make out what's being said at all. If I
didn't know the contents of the dialogue, I'd be lost.


On 9/06/2016 9:12 PM, Pete wrote:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still trying
to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works a
lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to
100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.


Re: espeak n g no good it sneezes on some words

Peter Beasley
 

That is because espeak is rubbish.

-----Original Message-----
From: Sharni-Lee Ward
Sent: Friday, June 10, 2016 4:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] espeak n g no good it sneezes on some words

... How can anyone understand what's being read or enjoy what they're
reading at such outrageous speeds? I've never changed NVDA from its
default rate with espeak. And how can you even tell there's fluttering
if the synth is yammering on so fast you can barely make out the words?
I just tested it and I can't make out what's being said at all. If I
didn't know the contents of the dialogue, I'd be lost.


On 9/06/2016 9:12 PM, Pete wrote:

hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still trying
to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works a
lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.




Re: Important: NVDA 2016.2.1 is out, fixing crashes when working with Microsoft Word, sacrificing grammar error announcement #NVAccess

Quentin Christensen
 

Sorry I was saying the issue would manifest if you had NVDA set to
report spelling errors and grammar errors, which was the default
setting in NVDA.

Hopefully we can get to the bottom of the issues and get grammar
reporting back in for 2016.3.

Kind regards

Quentin.

--
22 Point

Web: http://www.22point.com.au
Facebook: https://www.facebook.com/22Point
Twitter: https://twitter.com/22PointApps

Check out our first app, RapiTap! - Tap targets fast & avoid decoys:
Adrenaline pumping, Challenging, Accessible!
https://play.google.com/store/apps/details?id=au.com.twentytwopoint.rapitap
Free trial: https://play.google.com/store/apps/details?id=au.com.twentytwopoint.rapitapfree


On 10 June 2016 at 19:14, Quentin Christensen
<quentin.christensen@gmail.com> wrote:
The issue would manifest if you had NVDA set to

--
22 Point

Web: http://www.22point.com.au
Facebook: https://www.facebook.com/22Point
Twitter: https://twitter.com/22PointApps

Check out our first app, RapiTap! - Tap targets fast & avoid decoys:
Adrenaline pumping, Challenging, Accessible!
https://play.google.com/store/apps/details?id=au.com.twentytwopoint.rapitap
Free trial: https://play.google.com/store/apps/details?id=au.com.twentytwopoint.rapitapfree


On 10 June 2016 at 18:24, Brian's Mail list account
<bglists@blueyonder.co.uk> wrote:
So how does the grammar bit work into this then?

I never use it in any case as their idea of grammar and mine are poles
apart.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Joseph Lee" <joseph.lee22590@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, June 10, 2016 9:09 AM
Subject: [nvda] Important: NVDA 2016.2.1 is out, fixing crashes when working
with Microsoft Word, sacrificing grammar error announcement #NVAccess


Hi all,

For those using NVDA 2016.2 (or RC1): if you use Microsoft Word, please
grab
NVDA 2016.2.1, as it fixes Word crashing issue with loss of grammar error
announcement as a sacrifice. The new release from NV Access can be found
at:

http://www.nvaccess.org/post/nvda-2016-2-1-update-now-available/

Cheers,

Joseph




Re: Important: NVDA 2016.2.1 is out, fixing crashes when working with Microsoft Word, sacrificing grammar error announcement #NVAccess

Sharni-Lee Ward
 

Okay, I've updated! I'll admit I agree with Brian about the grammar
errors not always being accurate, but we can't have NVDA crashing in Word!


I hope you guys release an update like this one that fixes the issues
with pronunciations in Espeak NG when the devs of that synth have made
the necessary tweaks. I miss espeak... It pronounced my made up
characters' names just right and now at least one of them has been
messed up and I don't know how to fix it so it's pronounced exactly the
way it used to be...

10/06/2016 6:24 PM, Brian's Mail list account wrote:

So how does the grammar bit work into this then?

I never use it in any case as their idea of grammar and mine are poles
apart.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Joseph Lee"
<joseph.lee22590@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, June 10, 2016 9:09 AM
Subject: [nvda] Important: NVDA 2016.2.1 is out, fixing crashes when
working with Microsoft Word, sacrificing grammar error announcement
#NVAccess


Hi all,

For those using NVDA 2016.2 (or RC1): if you use Microsoft Word,
please grab
NVDA 2016.2.1, as it fixes Word crashing issue with loss of grammar
error
announcement as a sacrifice. The new release from NV Access can be
found at:

http://www.nvaccess.org/post/nvda-2016-2-1-update-now-available/

Cheers,

Joseph




Re: Important: NVDA 2016.2.1 is out, fixing crashes when working with Microsoft Word, sacrificing grammar error announcement #NVAccess

Quentin Christensen
 

The issue would manifest if you had NVDA set to

--
22 Point

Web: http://www.22point.com.au
Facebook: https://www.facebook.com/22Point
Twitter: https://twitter.com/22PointApps

Check out our first app, RapiTap! - Tap targets fast & avoid decoys:
Adrenaline pumping, Challenging, Accessible!
https://play.google.com/store/apps/details?id=au.com.twentytwopoint.rapitap
Free trial: https://play.google.com/store/apps/details?id=au.com.twentytwopoint.rapitapfree


On 10 June 2016 at 18:24, Brian's Mail list account
<bglists@blueyonder.co.uk> wrote:
So how does the grammar bit work into this then?

I never use it in any case as their idea of grammar and mine are poles
apart.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Joseph Lee" <joseph.lee22590@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, June 10, 2016 9:09 AM
Subject: [nvda] Important: NVDA 2016.2.1 is out, fixing crashes when working
with Microsoft Word, sacrificing grammar error announcement #NVAccess


Hi all,

For those using NVDA 2016.2 (or RC1): if you use Microsoft Word, please
grab
NVDA 2016.2.1, as it fixes Word crashing issue with loss of grammar error
announcement as a sacrifice. The new release from NV Access can be found
at:

http://www.nvaccess.org/post/nvda-2016-2-1-update-now-available/

Cheers,

Joseph




Re: espeak n g no good it sneezes on some words

Sukil Etxenike <sukiletxe@...>
 

Hi Pete,

I'd suggest the same thing I suggested before. That is, file an issue at <http:///github.com/espeak-ng/espeak-ng/issues>. If you don't have an account on GitHub, I can do it for you.

Please describe the error in detail, as I use the same version of eSpeak (with occassionally the English voice) with rate set to 30 or 40 with rate boost and I find no problems. Or perhaps I missunderstood you, and you use different parameteres.


RegardsSukil

El 09/06/2016 a las 13:12, Pete escribió:

hi

I all ways used the default nvda max english voice, I am disappointed in the changes made to espeak in nvda I think starting with nvda 2015 or may be as far back as 2014. Were the changes made to espeak by nvda devel or the creator of espeak. I would like a choice in nvda setup to be able to pick witch espeak to install. I feal the need for speed quite freequently and to have that fluttering sound in there when the check box for rate boost is checked so I can get up to a 600 to 800 words per min is disruptive. I am still trying to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works a lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to 100
percent
Can I replace the espeak n g with the older one by copying the old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.



Re: Important: NVDA 2016.2.1 is out, fixing crashes when working with Microsoft Word, sacrificing grammar error announcement #NVAccess

Brian's Mail list account BY <bglists@...>
 

So how does the grammar bit work into this then?

I never use it in any case as their idea of grammar and mine are poles apart.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Joseph Lee" <joseph.lee22590@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, June 10, 2016 9:09 AM
Subject: [nvda] Important: NVDA 2016.2.1 is out, fixing crashes when working with Microsoft Word, sacrificing grammar error announcement #NVAccess


Hi all,

For those using NVDA 2016.2 (or RC1): if you use Microsoft Word, please grab
NVDA 2016.2.1, as it fixes Word crashing issue with loss of grammar error
announcement as a sacrifice. The new release from NV Access can be found at:

http://www.nvaccess.org/post/nvda-2016-2-1-update-now-available/

Cheers,

Joseph


Important: NVDA 2016.2.1 is out, fixing crashes when working with Microsoft Word, sacrificing grammar error announcement #NVAccess

 

Hi all,

For those using NVDA 2016.2 (or RC1): if you use Microsoft Word, please grab NVDA 2016.2.1, as it fixes Word crashing issue with loss of grammar error announcement as a sacrifice. The new release from NV Access can be found at:

http://www.nvaccess.org/post/nvda-2016-2-1-update-now-available/

Cheers,

Joseph


Re: espeak n g no good it sneezes on some words

Sharni-Lee Ward
 

The reason I have it at default speed is it sounds as close to natural
as a synth can. That's also why I have inflection set to 100. I can't
bear synths without an inflection setting because I've been rather
spoiled by espeak. I tried Vocaliser two years ago and just couldn't
take it because however humanlike the voices sounded, they were also
more robotic-sounding to me than espeak with max inflection. Two of the
voices I used were also a bit on the slow side, but adjusting rate
didn't help matters.


I honestly can't stand hearing screen-readers going faster than my
settings in tutorials. I understand time constraints but that wouldn't
make me ramp up the speed.

On 10/06/2016 5:00 PM, Pete wrote:

hi

I have been using screen readers since 95 in windows except for an
old apple 2 e in the late 80s with textalker.


I do slow down first thing in the morning, uncheck the rate boost
and set speed to 100 % .

To me nvda set to 30 % sounds like if you set yours to 0 % or slower.

I am just used to it fast.

Pete



On 6/9/2016 11:14 PM, Sharni-Lee Ward wrote:
... How can anyone understand what's being read or enjoy what they're
reading at such outrageous speeds? I've never changed NVDA from its
default rate with espeak. And how can you even tell there's fluttering
if the synth is yammering on so fast you can barely make out the words?
I just tested it and I can't make out what's being said at all. If I
didn't know the contents of the dialogue, I'd be lost.


On 9/06/2016 9:12 PM, Pete wrote:
hi

I all ways used the default nvda max english voice, I am
disappointed in the changes made to espeak in nvda I think starting
with nvda 2015 or may be as far back as 2014. Were the changes made
to espeak by nvda devel or the creator of espeak. I would like a
choice in nvda setup to be able to pick witch espeak to install. I
feal the need for speed quite freequently and to have that fluttering
sound in there when the check box for rate boost is checked so I can
get up to a 600 to 800 words per min is disruptive. I am still trying
to get used to it.

Pete

On 6/8/2016 1:43 PM, nasrin khaksar wrote:
hi.
i use iven3 which is the best voice and also with default rate of nvda
which is 30!
its very perfect for me.

On 6/7/16, Shaun Everiss <sm.everiss@gmail.com> wrote:
I have replaced the data from old espeak over and the syntth works a
lot
better one person had trouble however, espeak at least the word stuff
works as I expect it so I am not to worried.



On 8/06/2016 3:31 a.m., Pete wrote:
as the s line says espeak n g makes a buzzing or sneezing sound
along
with some words.
NOT COOL AT ALL
along with the funny noises the voice flutters
This is default espeakng max voice set to en...
windows 7 x64 pro clean install
nvda installed using default settings except for speed set to
100
percent
Can I replace the espeak n g with the older one by copying the
old one
over the new one in the program files x86 \ nvda folder?
Thanks for any help!
Pete




.