Date   

Re: Getting to web browser toolbar

 

Thank you very much to all who took the time to respond.  I am particularly grateful for the tip that F10 will throw focus to the Chrome Menu button without opening the menu, which is not true if you use ALT+F to throw focus and open the Chrome Menu button at the same time.  Once you have focus on the Chrome menu button, which is always positioned as the rightmost/last button you know that any extensions buttons will absolutely be to the left of it, can use the left arrow key to move through them, and you know you've hit the end when you get to the address box/omnibox.

Below is what I just wrote up:

To Find a Toolbar Button In the Chrome Browser

1.       Hit F10 to throw focus to the Chrome Menu Button, which is always the rightmost (last) button on the main chrome toolbar.

2.       Use the left arrow to move in to the “Extensions Grouping,” which is what contains all the buttons you’ve chosen to make visible for extensions or that are made visible by default when an extension is installed.

3.      Continue to hit left arrow (or right arrow if you overshoot) until you land on the button you’re looking for.

4.      Hit Enter to activate the button, after which your screen reader should start identifying the items that are in the submenu that these buttons typically open.  The actual content of a given extension’s submenu can vary quite widely and include links, buttons, and more.  You activate buttons as you typically do.  In most instances you hit “Escape” to close the submenu.  If the button actually causes a separate window to open, which is what happens when if you have the Google Hangouts button and press it, CTRL+W will close that window.  Remember that if you’re using Hangouts each conversation you initiate causes its own window to open, and you should close it when you’re done with the conversation.  The Hangouts window is its own thing and essentially serves as a lookup window or where you enter a phone number if you wish to call or send a text as your conversation.

--
Brian

I worry a lot. . . I worry that no matter how cynical you become it's never enough to keep up.

         ~ Trudy, in Jane Wagner's "Search for Signs of Intelligent Life in the Universe"

    



Re: NVDA and WLM

Jacob Kruger
 

I'm running the rolled back version of just windows mail on my windows 10, 64 bit machine, with no hassles thus far - the form of disclaimer says that a windows update later on might cause issues, but, works well for me at moment.

You can find the necessary files, and detailed instructions on how to implement this roll-back, if you want it on following page:
http://opopanax.net/download/

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message -----
From: "Brian Crabtree" <briancrabtree@...>
To: <nvda@nvda.groups.io>
Sent: 23 June, 2016 4:11 PM
Subject: Re: [nvda] NVDA and WLM


So we are not expecting the Devs to produce a fix for this imminently?

What is a little irksome is that it works perfectly well on Windows 7 and after installing the flagship Windows 10 it causes problems. I was hoping that my explanation might trigger a fix or that someone has found a good workaround which did not involve ALT plus TAB or extra tabbing on pretty much every email.

Does anyone know if it helps to install any NVDA add-ons for Windows 10, for example?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account
Sent: 23 June 2016 08:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and WLM

Yes this is in fact an issue on Outlook Express but its not a new thing at all, it goes back to several versions previous. The difference in OE is that it remains pane no matter what, and only restarting the email software can fix it. Its as if some hooking into the software can cause a delay in the software which then makes the email program thinks its done things that it has not done.


Bloomberg Terminal with NVDA

Charles Coyle <charlieacoyle@...>
 

Hi all,

 

I was wondering whether any of you have experience of using the Bloomberg Terminal with NVDA (or, indeed, any other screen reader).

 

If so, I’d very much appreciate it if you could let me know how accessible or otherwise you found it and if there are ways of making it useable.

 

All the best,

 

Charlie


Re: Your First NVDA App Module: Session 0 posted, session 1 to be held on June 25, 2016 at NVDACon Korea TT server

J.G
 

Hi,


edsharp (v3.3) is posted on github. it can be found (.exe) at:


https://github.com/EmpowermentZone/EdSharp/releases/download/V3.3/edsetup.exe


regards, Jožef


Re: NVDA and WLM

Brian Crabtree <briancrabtree@...>
 

So we are not expecting the Devs to produce a fix for this imminently?

What is a little irksome is that it works perfectly well on Windows 7 and after installing the flagship Windows 10 it causes problems. I was hoping that my explanation might trigger a fix or that someone has found a good workaround which did not involve ALT plus TAB or extra tabbing on pretty much every email.

Does anyone know if it helps to install any NVDA add-ons for Windows 10, for example?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account
Sent: 23 June 2016 08:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and WLM

Yes this is in fact an issue on Outlook Express but its not a new thing at all, it goes back to several versions previous. The difference in OE is that it remains pane no matter what, and only restarting the email software can fix it. Its as if some hooking into the software can cause a delay in the software which then makes the email program thinks its done things that it has not done.


Re: Getting to web browser toolbar

Chris Mullins
 

Hi Brian

These are some of the notes I put together re Chrome:

 

In Google Chrome, there is a horizontal strip near the top of the screen containing, from left to right, the Navigation bar, the OmniBox, additional icons and the Chrome menu button icon.  The Navigation bar contains various icons which are used to manipulate the currently displayed web page and the Omni Box is the name given by Google to the combination address bar/search box, used to input URL’s and web search criteria.  All these items are accessible using a screen reader, just press the alt key or f10 to move focus to the ‘Chrome Menu’ button, and then use the tab key to loop through the items.  The icons are predominantly aimed at mouse users however, they can be keyboard activated and there are also keyboard shortcuts available for the majority of the functions they perform.  The number of icons shown in the Navigation bar at any one time varies depending on your configuration settings and the actions you are currently performing.  The one static icon in the Navigation bar is the Reload button used to reload the current web page. The variable icons will be discussed in the notes below.  To the right of the Omni Box is the Bookmark button which is used to add the URL currently displayed in the                         Omni Box to your bookmarks list, followed in my case with an Extensions group box listing my Chrome extensions.  On the right hand side is the Chrome menu button.

 

As I wrote previously, the Navigation bar is of more use to mouse users.  The screen reader user can use keyboard shortcuts for all the buttons that appear on the Navigation bar and other objects at the top of the screen.  These are as follows:

Back button – Alt+LeftArrow – moves back a level within the current web page

Forward button – Alt+RightArrow - - return to a level you have moved back from within the current web page

Reload button – F5 – reload the current web page.  Use Control+F5 to reload the web page from source, bypassing cached pages.

Home button – Alt+Home – loads your Homepage into the current browser tab

 

Omni Box – Alt+d – Moves focus to the Omni Box for URL or search criteria entry

BookMark       – Control+d – Bookmark the currently displayed web page

Chrome Menu – Alt or F10 – Move focus to the Chrome menu button (activate menu with spacebar)

 

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian Vogel
Sent: 22 June 2016 23:32
To: nvda@nvda.groups.io
Subject: [nvda] Getting to web browser toolbar

 

I feel like I'm beginning to lose my mind, but I know that I figured out how to get to the various buttons for extensions plus the menu button in Chrome and thought I posted about same.  I can get NVDA to throw focus to the Chrome Menu button by hitting ALT+F, and I can eventually get focus on the toolbar buttons between the address bar and the Menu Button playing around with the mouse, but there has to be a way to throw focus into that toolbar somehow, but I can't figure out how.  The buttons are announced accurately if I mouse-over or click on them, and the fact that I'm in a toolbar is mentioned, so this thing has to be accessible somehow.  If someone can point the way for me I would appreciate it.  If the technique is "generic" and applicable to other browsers I'd appreciate knowing that, too.

    
--
Brian

I worry a lot. . . I worry that no matter how cynical you become it's never enough to keep up.

         ~ Trudy, in Jane Wagner's "Search for Signs of Intelligent Life in the Universe"

    

 


Re: NVDA STRANGE RESTARTS

Christo Vorster
 

Hi

 

Yes, I experience the same problem from time to time. If NVDA does not restart after I pressed ALT-CTRL-N, I restart my computer.

 

I thought that I was just too impatient for the poor computer.

 

Regards

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Heaven Botma
Sent: Thursday, 23 June 2016 10:03 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA STRANGE RESTARTS

 

Hi


I have found lately, since about NVDA 2015.4 or 2016.1, that when I navigate quickly through dialogs, such as the open dialog in word or adding attachments in gmail or outlook, or when I use File Explorer and navigate between a number of subfolders, that NVDA just decides (best case scenario) to restart or (worst case) to just stop altogether.  It is quite annoying, especially when saving a file, because my laptop only allows me to save once I have:

 

1.       Switched on Narator,

Or

2.       Restarted NVDA manually.

Does anyone else experience this problem, and if you do, how do you fix it? 

 

I have an Asus laptop with Windows 10, MS Office 2010 and NVDA 2016.2.1.

 

Regards

 

Heaven Botma

Dosent

Lecturer

 

T: 023 348 7634

C: 079 512 2856

F: 023 342 3959

E: heaven@...

W: www.kaleidoscopesa.org

Adderleystraat 20 Adderley Street

Posbus 233 P.O. Box, Worcester, 6849

 

 

 

 

 


Re: NVDA STRANGE RESTARTS

Chris
 

yes, And i dont
 



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Heaven Botma
Sent: 23 June 2016 09:03
To: nvda@nvda.groups.io
Subject: [nvda] NVDA STRANGE RESTARTS

Hi


I have found lately, since about NVDA 2015.4 or 2016.1, that when I navigate quickly through dialogs, such as the open dialog in word or adding attachments in gmail or outlook, or when I use File Explorer and navigate between a number of subfolders, that NVDA just decides (best case scenario) to restart or (worst case) to just stop altogether.  It is quite annoying, especially when saving a file, because my laptop only allows me to save once I have:

 

1.       Switched on Narator,

Or

2.       Restarted NVDA manually.

Does anyone else experience this problem, and if you do, how do you fix it? 

 

I have an Asus laptop with Windows 10, MS Office 2010 and NVDA 2016.2.1.

 

Regards

 

Heaven Botma

Dosent

Lecturer

 

T: 023 348 7634

C: 079 512 2856

F: 023 342 3959

E: heaven@...

W: www.kaleidoscopesa.org

Adderleystraat 20 Adderley Street

Posbus 233 P.O. Box, Worcester, 6849

 

 

 

 

 


NVDA STRANGE RESTARTS

Heaven Botma <heaven@...>
 

Hi


I have found lately, since about NVDA 2015.4 or 2016.1, that when I navigate quickly through dialogs, such as the open dialog in word or adding attachments in gmail or outlook, or when I use File Explorer and navigate between a number of subfolders, that NVDA just decides (best case scenario) to restart or (worst case) to just stop altogether.  It is quite annoying, especially when saving a file, because my laptop only allows me to save once I have:

 

1.       Switched on Narator,

Or

2.       Restarted NVDA manually.

Does anyone else experience this problem, and if you do, how do you fix it? 

 

I have an Asus laptop with Windows 10, MS Office 2010 and NVDA 2016.2.1.

 

Regards

 

Heaven Botma

Dosent

Lecturer

 

T: 023 348 7634

C: 079 512 2856

F: 023 342 3959

E: heaven@...

W: www.kaleidoscopesa.org

Adderleystraat 20 Adderley Street

Posbus 233 P.O. Box, Worcester, 6849

 

 

 

 

 


Re: and firefox

Gene
 

Also, most mesages that appear don't require you to do anything.  They just sit there and  are replaced by a new message when a new one comes upp.
 
But if you want to try to find such messages, you may get to them by moving to the address bar control l and then tabbing a few times and then shift tabbing back to, then past where you were to find where they are displayed.  I don't recall if they are usually displayed in the same place.
 
Gene

----- Original Message -----
Sent: Wednesday, June 22, 2016 7:41 PM
Subject: Re: [nvda] and firefox

Hi


that message has not come up recently for me to do that but I think if I remember right it can be turned off under the security section in mozillla fire fox. You will need to look for the following called Remember logins for sites and uncheck it.


Just under that section will be onecalled saved log ins if you go into that section you can remove any from there as well. It is safer to type them in each time rather than save them Unless you have a really good password as in a master password you would want to have it really hard to break.

If this is the case check the master password one. I forgot to say it is under the tools....options section in mozilla fire fox.


I know I can get to that other part you were talking about, but I can not remember how at present.



Gene nz





On 23/06/2016 12:12 PM, Chris Shook via Groups.io wrote:
Hi,
I've been using firefox for the passed few weeks for most of my brousing. I have one question. How do you get to the alert toolbars? For example, the alert that asks if you want to save the password for this website?
Thanks
Chris


-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: Getting to web browser toolbar

Gene
 

I'm not sure what you are trying to do.  F6 is usually the way to move from one part of a window to another part of a window such as from tool bar to tool bar or from a window to tool bar or address bar or to move around to where you were originally.  Once on a tool bar, means of movement usually depends on the layout of the tool bar.  If vertical, the up and down arrows are used.  If horizontal, the left and right arrows are used. 
 
Gene

----- Original message -----
Sent: Wednesday, June 22, 2016 5:31 PM
Subject: [nvda] Getting to web browser toolbar

I feel like I'm beginning to lose my mind, but I know that I figured out how to get to the various buttons for extensions plus the menu button in Chrome and thought I posted about same.  I can get NVDA to throw focus to the Chrome Menu button by hitting ALT+F, and I can eventually get focus on the toolbar buttons between the address bar and the Menu Button playing around with the mouse, but there has to be a way to throw focus into that toolbar somehow, but I can't figure out how.  The buttons are announced accurately if I mouse-over or click on them, and the fact that I'm in a toolbar is mentioned, so this thing has to be accessible somehow.  If someone can point the way for me I would appreciate it.  If the technique is "generic" and applicable to other browsers I'd appreciate knowing that, too.

    
--
Brian

I worry a lot. . . I worry that no matter how cynical you become it's never enough to keep up.

         ~ Trudy, in Jane Wagner's "Search for Signs of Intelligent Life in the Universe"

    



Re: and firefox

Brian's Mail list account
 

The this page is trying to redirect message seems to be allowed with alt a.
Quite why it alerts me to this and how I can tell it to shut up permanently I have no idea.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, June 23, 2016 1:58 AM
Subject: Re: [nvda] and firefox


Chris,

This is a SWAG based on my experience with JAWS and IE, but when a notification bar such as the one you mention pops up in IE the command ALT+N throws focus to it. Give that a try and see if it works in Firefox. Either way, please report back on your finding.
--
Brian

I worry a lot. . . I worry that no matter how cynical you become it's never enough to keep up.
~ Trudy, in Jane Wagner's "Search for Signs of Intelligent Life in the Universe"


Re: NVDA and WLM

Brian's Mail list account
 

Yes this is in fact an issue on Outlook Express but its not a new thing at all, it goes back to several versions previous. The difference in OE is that it remains pane no matter what, and only restarting the email software can fix it. Its as if some hooking into the software can cause a delay in the software which then makes the email program thinks its done things that it has not done.

Most odd. I have a shortcut on my desktop for OE that reboots it by closing it without letting it save the identity its on, so it will come back up in the same one.
I've been doing this on xp and now on windows 7, ie the hacked version of OE.

I never liked live mail due to its everything in a big pile mentality, and the lack of proper ccess to the to field.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Brian Crabtree" <briancrabtree@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, June 22, 2016 3:27 PM
Subject: [nvda] NVDA and WLM


I have read the messages so far on the problems with NVDA incorrectly reporting WLM navigation on Windows 10 and would like to add the following, which may serve as clarification for other affected users and for the Devs to track down the problem. Hopefully this is not already common knowledge.

There seem to be 2 issues, although an error does not always occur and there is inconsistency in what NVDA says, even if working on the same message twice:

1. in a new message or when forwarding a message without an attachment, when you hit Tab after entering an addressee and a Subject, the focus is not on the message text box – it seems to me that the focus goes to an assumed attachment, even when there is no attachment, and hitting Tab again restores normal operation.

2. in a reply, what is spoken is the “To” box instead of focus being on the message text box. Pressing Tab to navigate is ineffective (it actually adds tabs to the message text). You can input text, but text editing is impossible, with NVDA saying only “blank” – normal operation is restored by using Alt plus Tab to go away from the reply, then again to return to it.

In a little more detail, I think I can suggest ways of detecting the likelihood of an error, until a real fix is found:
a.. in a new or forwarded message (CTRL plus N or CTRL plus F), insert the recipient, press Enter to voice the selection, tab to the Subject box and type the topic, tab to what should be the message text box, if NVDA says “document editable, blank” all should be fine, but if it says “pane, document editable, blank”, the insertion point sits in the message text box for about a second, before disappearing and subsequent typing is lost. The word “pane” is the indicator that typed text will not go into the message box, so an extra Tab is required.
b.. when replying to a message (CTRL plus R), NVDA says either “window, note, window, window, to, edit” or “document, pane, to, edit” followed by the recipient’s details, as if the focus is on the To box. In fact, the insertion point is in the message text box, typing does go into the message box and Tab inserts 4 spaces into the message text box, so is no good for navigating. Now, on trying to edit the text, although backspace does remove a character, NVDA just says “blank” (and you cannot proof read the whole message, because Caps Lock + L reads the To box contents, not the message box contents). The solution here is to press ALT plus TAB to go out and again to go back before being able to work on the message – this works either before or after starting to type into the message text box.
c.. on forwarding a message with an attachment, at the first Tab after the Subject box, NVDA voices the attachment name, in case you want to delete it, and the final tab takes you to the message text box – i.e. that works fine.
d.. just occasionally, NVDA opens a message window and stays silent – it is simplest to use ALT plus Tab to go away and then back, which should resolve the issue.
e.. for the Devs, I should reiterate that NVDA seems entirely random in what it says and sometimes repeats parts of the window heading or the “To, edit, type recipient name...” announcement, although sometimes it omits “type recipient name....”. It also says random things like “window, note, window, window” which I have not heard before.
I hope that helps in some way. Brian Crabtree
I was testing on an up to date Windows 10 system with the latest version of NVDA and Windows Live Mail 2012.


Re: A strange one.

Brian's Mail list account
 

No its not that, as this version does not have that.

The fact that its intermittent is a bit odd.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Michel Such" <michel.such@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, June 22, 2016 4:10 PM
Subject: Re: [nvda] A strange one.


Hi Brian,


I already noticed this, but with LibreOffice.

In Libreoffice, I got rid of the problem by modifying an option.

They have some feature they call "smooth scrollong" that must be unchecked.

Sorry, not sure that "smooth scrolling" is the wording in English, since
my version is in French.

Don't know if the same kind of feature exists with Word.



Michel SUCH

michel.such@...
Skype : michel.such
Twitter : @SuchMichel

Le 2016-06-22 à 16:55, Brian's Mail list account a écrit :
Has anyone else found that nvda creates som oddities when its been running for a while?
In Word, at page breaks in focus mode you find it won't go down or up past the page break depending on which side you are, unless you restart nvda, which puts word into the non active window, so when you get it back all is good again till an hour or so later on. I'm sure it never used to do this before. this ins in the next branch in windows 7, but it does not seem to be a matter of operating system. I'm using an older version of word with the old menus, so really I'd need somebody with a newer version to see if this happens. Occasionally getting to the top of a document throws an alarm error ding but not looked into this yet so thought I'd just place this out there in case.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.



Re: and firefox

Marco Oros
 

Also, I'd prefer to use an object navigation to move on this password saving.


Re: and firefox

P. Otter
 


hi,
there are 2 ways to do this.
first, when you hear the question if you want to save the password, press alt plus o
that works as long you have'nt replased the arrow keys.
else pressalt o and navigate down until the end of the page but most of the time, i press shift plustab until i hear about saving the password for this page.
hope this helps
paul otter
 

----- Original Message -----
Sent: Thursday, June 23, 2016 2:12 AM
Subject: [nvda] and firefox

Hi,
I've been using firefox for the passed few weeks for most of my brousing. I have one question. How do you get to the alert toolbars? For example, the alert that asks if you want to save the password for this website?
Thanks
Chris


Re: Your First NVDA App Module: Session 0 posted, session 1 to be held on June 25, 2016 at NVDACon Korea TT server

蔡宗豪 Victor Cai
 

Hi,
Thank you for the reply.
Actually, its a little bit difficult to recognsize letter (l, m, p, g)
in eSpeak.

Regards,
Victor


2016-06-23 10:15 GMT+08:00, Joseph Lee <joseph.lee22590@...>:

Hi,
Yes and no: yes when giving presentations, and no when reading
source code (unless if people say it would be better to use one
voice).
Cheers,
Joseph

----- Original Message -----
From: 若쀨괭 Victor Cai <surfer0627@...
To: nvda@nvda.groups.io
Date sent: Thu, 23 Jun 2016 09:59:02 +0800
Subject: Re: [nvda] Your First NVDA App Module: Session 0 posted,
session 1 to be held on June 25, 2016 at NVDACon Korea TT server

Hi,
Will speaker use voice (Nuance Samantha) for the course?


--
Regards,
Victor




2016-06-19 6:53 GMT+08:00, Joseph Lee
<joseph.lee22590@...>:
Hi everyone,



Session 0 (overview) from Your First NVDA App Module course is
now
available:

http://www.nvda-kr.org/files/nvdaAppMod0.mp3



Also, session 1 (app module introduction) will be held on June
25, 2016 at
11 AM Pacific (18:00 UTC) at NVDACon Korea TeamTalk Server
(nvda-kr.org).
You need TT5 (be sure to install TT5 Classic client) and enter
the
following
server information:



* URL: nvda-kr.org

* TCP: 10333

* UDP: 10333

* No username or password required.

* Channel will be root (nvdachat).



If you are interested in learning to write app modules, please
think about
an app you feel an app module could be useful by session 1. For
those who'd
like to use this opportunity as a stepping stone for
contributing to NVDA
Core development, please checkout NVDA source code (git clone
-recursive
https://github.com/nvaccess/nvda) as we'll be using app modules
in there as
examples. For people not interested in coding, don't worry - a
backstage
tour will be provided to show you how app modules work behind
the scenes.
For those who cannot make it, audio recordings of each session
will be
provided shortly after the session ends.



P.S. If you know anyone in your language community who'd like
to write app
modules, please feel free to invite them. Also, other app
module experts
are
more than welcome to chime in their expertise during course
sessions.



See you on June 25th.

Cheers,

Joseph










Re: Getting to web browser toolbar

 

Gene,

            Thanks.  I've always used ALT+D to shoot me directly to the address bar.

             I'm going to have to play with this some over the next few days.  I'm still not good with object navigation.
--
Brian

I worry a lot. . . I worry that no matter how cynical you become it's never enough to keep up.

         ~ Trudy, in Jane Wagner's "Search for Signs of Intelligent Life in the Universe"

    



Re: Your First NVDA App Module: Session 0 posted, session 1 to be held on June 25, 2016 at NVDACon Korea TT server

 

Hi,
Yes and no: yes when giving presentations, and no when reading source code (unless if people say it would be better to use one voice).
Cheers,
Joseph

----- Original Message -----
From: 若쀨괭 Victor Cai <surfer0627@...
To: nvda@nvda.groups.io
Date sent: Thu, 23 Jun 2016 09:59:02 +0800
Subject: Re: [nvda] Your First NVDA App Module: Session 0 posted, session 1 to be held on June 25, 2016 at NVDACon Korea TT server

Hi,
Will speaker use voice (Nuance Samantha) for the course?


--
Regards,
Victor




2016-06-19 6:53 GMT+08:00, Joseph Lee <joseph.lee22590@...>:
Hi everyone,



Session 0 (overview) from Your First NVDA App Module course is now
available:

http://www.nvda-kr.org/files/nvdaAppMod0.mp3



Also, session 1 (app module introduction) will be held on June 25, 2016 at
11 AM Pacific (18:00 UTC) at NVDACon Korea TeamTalk Server (nvda-kr.org).
You need TT5 (be sure to install TT5 Classic client) and enter the
following
server information:



* URL: nvda-kr.org

* TCP: 10333

* UDP: 10333

* No username or password required.

* Channel will be root (nvdachat).



If you are interested in learning to write app modules, please think about
an app you feel an app module could be useful by session 1. For those who'd
like to use this opportunity as a stepping stone for contributing to NVDA
Core development, please checkout NVDA source code (git clone -recursive
https://github.com/nvaccess/nvda) as we'll be using app modules in there as
examples. For people not interested in coding, don't worry - a backstage
tour will be provided to show you how app modules work behind the scenes.
For those who cannot make it, audio recordings of each session will be
provided shortly after the session ends.



P.S. If you know anyone in your language community who'd like to write app
modules, please feel free to invite them. Also, other app module experts
are
more than welcome to chime in their expertise during course sessions.



See you on June 25th.

Cheers,

Joseph


Re: Your First NVDA App Module: Session 0 posted, session 1 to be held on June 25, 2016 at NVDACon Korea TT server

蔡宗豪 Victor Cai
 

Hi,
Will speaker use voice (Nuance Samantha) for the course?


--
Regards,
Victor




2016-06-19 6:53 GMT+08:00, Joseph Lee <joseph.lee22590@...>:

Hi everyone,



Session 0 (overview) from Your First NVDA App Module course is now
available:

http://www.nvda-kr.org/files/nvdaAppMod0.mp3



Also, session 1 (app module introduction) will be held on June 25, 2016 at
11 AM Pacific (18:00 UTC) at NVDACon Korea TeamTalk Server (nvda-kr.org).
You need TT5 (be sure to install TT5 Classic client) and enter the
following
server information:



* URL: nvda-kr.org

* TCP: 10333

* UDP: 10333

* No username or password required.

* Channel will be root (nvdachat).



If you are interested in learning to write app modules, please think about
an app you feel an app module could be useful by session 1. For those who'd
like to use this opportunity as a stepping stone for contributing to NVDA
Core development, please checkout NVDA source code (git clone -recursive
https://github.com/nvaccess/nvda) as we'll be using app modules in there as
examples. For people not interested in coding, don't worry - a backstage
tour will be provided to show you how app modules work behind the scenes.
For those who cannot make it, audio recordings of each session will be
provided shortly after the session ends.



P.S. If you know anyone in your language community who'd like to write app
modules, please feel free to invite them. Also, other app module experts
are
more than welcome to chime in their expertise during course sessions.



See you on June 25th.

Cheers,

Joseph