Date   

Re: win7 security

Gene
 

You don't have to go to programs and features in Windows 7 by actually directly going there, that is, knowing where it is, what its name is, and going to and opening the item that has that name by, for example, finding it in Control panel.  That is one of the main and most important points of the start menu search feature.  Type something like uninstall a program, down arrow through the results and you'll see what you are looking for.  And you won't have to know the technical name. You will find a result, perhaps more than one that says something like uninstall a program.  If you press enter on it, then yes, programs and features will open, but you don't have to know the name to find and open it.
 
Gene 

----- Original Message -----
From: Arlene
Sent: Wednesday, March 20, 2019 5:40 PM
Subject: Re: [nvda] win7 security

Hi there, if you are using xp. If you have to uninstall a program. You always have to go to the control panel.  I can’t remember where in the control panel you had to go. But for windows 7 its there too. But you had to go to programs and features.  Windows ten it’s different. Almost the same as 7.  I’ll look and see where you uninstall programs.  I know on ten you have to go to the control panel.  In xp and 7 you could uninstall programs in the start menue.  I always did it in the control panel. 

 

Sent from Mail for Windows 10

 

From: zahra
Sent: March 19, 2019 9:46 PM
To: nvda
Subject: Re: [nvda] win7 security

 

hi gene.

you said

One of the main improvements in Windows 7 is that you don't have to

look for things as you did in XP.  Use the start menu search and

you'll fined most things, even if you don't know what they are called.

The start menu search is designed to find things when the technical or

exact words aren't used.  for example, use the start menu search to

search for uninstall programs or uninstall a program.  You will find

relevant results even though you didn't use the technical name.  I

don't remember it any more.  But you will find entries in plain

English such as remove a program.

 

 

really?

an option for windows 7 is programs and feature if i am right.

then, if i dont remember the name and like xp, search add-remove

programs does it work and does it find my desired item?

the only place which i recognize that it can find my desired item,

even if i dont know the exact sentences, words or even spelling, is

google search.

i describe story sometimes for google and google finds immediate my

desired option or item for me!

thanks for your great information, God bless you!

On 3/19/19, Gene <gsasner@...> wrote:

> It was likely a false alarm.  Have you rebooted since?  If you reboot and

> you get no such message, it is very unlikely anything to worry about.  if

> you reboot and do get such a message, what screen-reader are you using?  I

> suspect the message also said something like click here to address the

> problem.

> However, if you want to check your security settings before doing any of

> this, do the following:

> Open the start menu.  Type the word security.

> Then after a moment, read the current line.  If it isn't what you want, look

> through many of the options.  Down arrow through them.  If you find what you

> want, press enter.

> You will find what you want, as one of the items says chec security status.

> I just checked.

> One of the main improvements in Windows 7 is that you don't have to look for

> things as you did in XP.  Use the start menu search and you'll fined most

> things, even if you don't know what they are called.  The start menu search

> is designed to find things when the technical or exact words aren't used.

> for example, use the start menu search to search for uninstall programs or

> uninstall a program.  You will find relevant results even though you didn't

> use the technical name.  I don't remember it any more.  But you will find

> entries in plain English such as remove a program.

> This is important to know not only for Windows 7 but, though I haven't

> checked because I haven't used higher versions of Windows, I'm sure they all

> have this feature.

> Gene

> ----- Original Message -----

> From: Monte Single

> Sent: Tuesday, March 19, 2019 10:20 PM

> To: nvda@nvda.groups.io

> Subject: [nvda] win7 security

> HI folks,

> Yesterday I  got a popup on my win 7 machine saying windows security was

> turned off.  Don't think I've heard that in all the years I have had this

> pc.

> Where do I look to find status of win security.

> Thanks,

> Monte

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 


Re: Video converting software that works with windows 10 and NVDA

 


I should also add that it was why I switched to payed for software which I mostly don't even use.

I found some more free software to do what I need as well as what I have.

The issue with stuff like dvdstudio and freemake is they will happily load extras and sometimes those boxes are not accessible.

From experience even if you uninstall said software later the system still has issues.

Even if you then restore the system and run a malware scan there may be issues.

If you do load unwanted stuff you will have to reformat to make it go away.

After falling once to many for this and that and having to reformat to get rid of it I made the decission to get out of using the software and spent cash on something that actually isn't full of junkware.

Sadly accessibility while good has its moments and now I do what I need but still.


On 21/03/2019 10:52 AM, Sarah k Alawami wrote:

Use reaper to edit the videos. I use it for editing much more but I also edit my videos that way.

Take care

On 20 Mar 2019, at 13:32, Dan Beaver wrote:

Oh, by the way, FreemakeVC tries to install additional software when it is installed. Make sure you uncheck these items.


Dan Beaver

On 3/20/2019 4:29 PM, Dan Beaver via Groups.Io wrote:

I use FreemakeVC.  It will convert a boat load of video formats.  It will also rip and burn videos.


There is a free version which runs a little slower and a paid version which runs faster and which allows a few more features.  I have used both and only purchased the paid version for the increased speed. It wasn't bad on the free version but I was ripping our video library and decided the increased speed was worth it. We have over 600 movies we have collected over the years.


Hope this helps.


Dan Beaver

On 3/20/2019 3:06 PM, Armando Maldonado wrote:
Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando
-- 
Dan Beaver (KC4DOY)
-- 
Dan Beaver (KC4DOY)


Re: win7 security

Richard Wells
 

In Windows XP, 7, 8, 8.1 and 10, just press WINDOWS-KEY+R, type: appwiz.cpl and press ENTER. Now you are ready to remove unwanted applications/programs.

On 3/20/2019 5:40 PM, Arlene wrote:

Hi there, if you are using xp. If you have to uninstall a program. You always have to go to the control panel.  I can’t remember where in the control panel you had to go. But for windows 7 its there too. But you had to go to programs and features.  Windows ten it’s different. Almost the same as 7.  I’ll look and see where you uninstall programs.  I know on ten you have to go to the control panel.  In xp and 7 you could uninstall programs in the start menue.  I always did it in the control panel. 

 

Sent from Mail for Windows 10

 

From: zahra
Sent: March 19, 2019 9:46 PM
To: nvda
Subject: Re: [nvda] win7 security

 

hi gene.

you said

One of the main improvements in Windows 7 is that you don't have to

look for things as you did in XP.  Use the start menu search and

you'll fined most things, even if you don't know what they are called.

The start menu search is designed to find things when the technical or

exact words aren't used.  for example, use the start menu search to

search for uninstall programs or uninstall a program.  You will find

relevant results even though you didn't use the technical name.  I

don't remember it any more.  But you will find entries in plain

English such as remove a program.

 

 

really?

an option for windows 7 is programs and feature if i am right.

then, if i dont remember the name and like xp, search add-remove

programs does it work and does it find my desired item?

the only place which i recognize that it can find my desired item,

even if i dont know the exact sentences, words or even spelling, is

google search.

i describe story sometimes for google and google finds immediate my

desired option or item for me!

thanks for your great information, God bless you!

On 3/19/19, Gene <gsasner@...> wrote:

> It was likely a false alarm.  Have you rebooted since?  If you reboot and

> you get no such message, it is very unlikely anything to worry about.  if

> you reboot and do get such a message, what screen-reader are you using?  I

> suspect the message also said something like click here to address the

> problem.

> However, if you want to check your security settings before doing any of

> this, do the following:

> Open the start menu.  Type the word security.

> Then after a moment, read the current line.  If it isn't what you want, look

> through many of the options.  Down arrow through them.  If you find what you

> want, press enter.

> You will find what you want, as one of the items says chec security status.

> I just checked.

> One of the main improvements in Windows 7 is that you don't have to look for

> things as you did in XP.  Use the start menu search and you'll fined most

> things, even if you don't know what they are called.  The start menu search

> is designed to find things when the technical or exact words aren't used.

> for example, use the start menu search to search for uninstall programs or

> uninstall a program.  You will find relevant results even though you didn't

> use the technical name.  I don't remember it any more.  But you will find

> entries in plain English such as remove a program.

> This is important to know not only for Windows 7 but, though I haven't

> checked because I haven't used higher versions of Windows, I'm sure they all

> have this feature.

> Gene

> ----- Original Message -----

> From: Monte Single

> Sent: Tuesday, March 19, 2019 10:20 PM

> To: nvda@nvda.groups.io

> Subject: [nvda] win7 security

> HI folks,

> Yesterday I  got a popup on my win 7 machine saying windows security was

> turned off.  Don't think I've heard that in all the years I have had this

> pc.

> Where do I look to find status of win security.

> Thanks,

> Monte

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 


Re: win7 security

Rosemarie Chavarria
 

Hi, Arleen,

 

If I remember correctly, in XP it’s called add or remove programs.

 

Rosemarie

 

 

 

Sent from Mail for Windows 10

 

From: Arlene
Sent: Wednesday, March 20, 2019 3:40 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] win7 security

 

Hi there, if you are using xp. If you have to uninstall a program. You always have to go to the control panel.  I can’t remember where in the control panel you had to go. But for windows 7 its there too. But you had to go to programs and features.  Windows ten it’s different. Almost the same as 7.  I’ll look and see where you uninstall programs.  I know on ten you have to go to the control panel.  In xp and 7 you could uninstall programs in the start menue.  I always did it in the control panel. 

 

Sent from Mail for Windows 10

 

From: zahra
Sent: March 19, 2019 9:46 PM
To: nvda
Subject: Re: [nvda] win7 security

 

hi gene.

you said

One of the main improvements in Windows 7 is that you don't have to

look for things as you did in XP.  Use the start menu search and

you'll fined most things, even if you don't know what they are called.

The start menu search is designed to find things when the technical or

exact words aren't used.  for example, use the start menu search to

search for uninstall programs or uninstall a program.  You will find

relevant results even though you didn't use the technical name.  I

don't remember it any more.  But you will find entries in plain

English such as remove a program.

 

 

really?

an option for windows 7 is programs and feature if i am right.

then, if i dont remember the name and like xp, search add-remove

programs does it work and does it find my desired item?

the only place which i recognize that it can find my desired item,

even if i dont know the exact sentences, words or even spelling, is

google search.

i describe story sometimes for google and google finds immediate my

desired option or item for me!

thanks for your great information, God bless you!

On 3/19/19, Gene <gsasner@...> wrote:

> It was likely a false alarm.  Have you rebooted since?  If you reboot and

> you get no such message, it is very unlikely anything to worry about.  if

> you reboot and do get such a message, what screen-reader are you using?  I

> suspect the message also said something like click here to address the

> problem.

> However, if you want to check your security settings before doing any of

> this, do the following:

> Open the start menu.  Type the word security.

> Then after a moment, read the current line.  If it isn't what you want, look

> through many of the options.  Down arrow through them.  If you find what you

> want, press enter.

> You will find what you want, as one of the items says chec security status.

> I just checked.

> One of the main improvements in Windows 7 is that you don't have to look for

> things as you did in XP.  Use the start menu search and you'll fined most

> things, even if you don't know what they are called.  The start menu search

> is designed to find things when the technical or exact words aren't used.

> for example, use the start menu search to search for uninstall programs or

> uninstall a program.  You will find relevant results even though you didn't

> use the technical name.  I don't remember it any more.  But you will find

> entries in plain English such as remove a program.

> This is important to know not only for Windows 7 but, though I haven't

> checked because I haven't used higher versions of Windows, I'm sure they all

> have this feature.

> Gene

> ----- Original Message -----

> From: Monte Single

> Sent: Tuesday, March 19, 2019 10:20 PM

> To: nvda@nvda.groups.io

> Subject: [nvda] win7 security

> HI folks,

> Yesterday I  got a popup on my win 7 machine saying windows security was

> turned off.  Don't think I've heard that in all the years I have had this

> pc.

> Where do I look to find status of win security.

> Thanks,

> Monte

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 

 


Re: win7 security

Arlene
 

Hi there, if you are using xp. If you have to uninstall a program. You always have to go to the control panel.  I can’t remember where in the control panel you had to go. But for windows 7 its there too. But you had to go to programs and features.  Windows ten it’s different. Almost the same as 7.  I’ll look and see where you uninstall programs.  I know on ten you have to go to the control panel.  In xp and 7 you could uninstall programs in the start menue.  I always did it in the control panel. 

 

Sent from Mail for Windows 10

 

From: zahra
Sent: March 19, 2019 9:46 PM
To: nvda
Subject: Re: [nvda] win7 security

 

hi gene.

you said

One of the main improvements in Windows 7 is that you don't have to

look for things as you did in XP.  Use the start menu search and

you'll fined most things, even if you don't know what they are called.

The start menu search is designed to find things when the technical or

exact words aren't used.  for example, use the start menu search to

search for uninstall programs or uninstall a program.  You will find

relevant results even though you didn't use the technical name.  I

don't remember it any more.  But you will find entries in plain

English such as remove a program.

 

 

really?

an option for windows 7 is programs and feature if i am right.

then, if i dont remember the name and like xp, search add-remove

programs does it work and does it find my desired item?

the only place which i recognize that it can find my desired item,

even if i dont know the exact sentences, words or even spelling, is

google search.

i describe story sometimes for google and google finds immediate my

desired option or item for me!

thanks for your great information, God bless you!

On 3/19/19, Gene <gsasner@...> wrote:

> It was likely a false alarm.  Have you rebooted since?  If you reboot and

> you get no such message, it is very unlikely anything to worry about.  if

> you reboot and do get such a message, what screen-reader are you using?  I

> suspect the message also said something like click here to address the

> problem.

> However, if you want to check your security settings before doing any of

> this, do the following:

> Open the start menu.  Type the word security.

> Then after a moment, read the current line.  If it isn't what you want, look

> through many of the options.  Down arrow through them.  If you find what you

> want, press enter.

> You will find what you want, as one of the items says chec security status.

> I just checked.

> One of the main improvements in Windows 7 is that you don't have to look for

> things as you did in XP.  Use the start menu search and you'll fined most

> things, even if you don't know what they are called.  The start menu search

> is designed to find things when the technical or exact words aren't used.

> for example, use the start menu search to search for uninstall programs or

> uninstall a program.  You will find relevant results even though you didn't

> use the technical name.  I don't remember it any more.  But you will find

> entries in plain English such as remove a program.

> This is important to know not only for Windows 7 but, though I haven't

> checked because I haven't used higher versions of Windows, I'm sure they all

> have this feature.

> Gene

> ----- Original Message -----

> From: Monte Single

> Sent: Tuesday, March 19, 2019 10:20 PM

> To: nvda@nvda.groups.io

> Subject: [nvda] win7 security

> HI folks,

> Yesterday I  got a popup on my win 7 machine saying windows security was

> turned off.  Don't think I've heard that in all the years I have had this

> pc.

> Where do I look to find status of win security.

> Thanks,

> Monte

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 


Re: a way to lock the nvda key?

Dave Grossoehme
 

Good Afternoon:  You are correct.  The answer is in Ease of Access.  Go down and enter on keys and tab over to sticky keys.

Dave


On 3/13/2019 12:50 PM, Brian Vogel wrote:
Sarah,

          What you're looking for sounds an awful lot like the age-old sticky keys feature under Windows.  It's in the Ease of Access settings, Keyboard pane in Windows 10 and I know it exists at least back to Windows 7, if not earlier.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 


Re: Video converting software that works with windows 10 and NVDA

Sarah k Alawami
 

Use reaper to edit the videos. I use it for editing much more but I also edit my videos that way.

Take care

On 20 Mar 2019, at 13:32, Dan Beaver wrote:

Oh, by the way, FreemakeVC tries to install additional software when it is installed. Make sure you uncheck these items.


Dan Beaver

On 3/20/2019 4:29 PM, Dan Beaver via Groups.Io wrote:

I use FreemakeVC.  It will convert a boat load of video formats.  It will also rip and burn videos.


There is a free version which runs a little slower and a paid version which runs faster and which allows a few more features.  I have used both and only purchased the paid version for the increased speed. It wasn't bad on the free version but I was ripping our video library and decided the increased speed was worth it. We have over 600 movies we have collected over the years.


Hope this helps.


Dan Beaver

On 3/20/2019 3:06 PM, Armando Maldonado wrote:
Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando
-- 
Dan Beaver (KC4DOY)
-- 
Dan Beaver (KC4DOY)


Re: Video converting software that works with windows 10 and NVDA

Manoj Govindraj <manmusical9@...>
 

Hi Armando,
You can try virtual dub. It is very accessible with NVDA and works on windows 10 as I have briefly used it. The only issue with that is it does not have a built-in MP4 converter which you will need to manually import by downloading a particular MP4 converter. I am stuck exactly at this point where I am not able to figure out how to manually import the external MP4 converter into virtual dub. Something well worth researching for all of us.
Cheers
Manoj

On Mar 20, 2019, at 4:29 PM, Dan Beaver <dbeaver888@...> wrote:

I use FreemakeVC.  It will convert a boat load of video formats.  It will also rip and burn videos.


There is a free version which runs a little slower and a paid version which runs faster and which allows a few more features.  I have used both and only purchased the paid version for the increased speed. It wasn't bad on the free version but I was ripping our video library and decided the increased speed was worth it. We have over 600 movies we have collected over the years.


Hope this helps.


Dan Beaver

On 3/20/2019 3:06 PM, Armando Maldonado wrote:
Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando
-- 
Dan Beaver (KC4DOY)


Re: Video converting software that works with windows 10 and NVDA

Dan Beaver
 

Oh, by the way, FreemakeVC tries to install additional software when it is installed. Make sure you uncheck these items.


Dan Beaver

On 3/20/2019 4:29 PM, Dan Beaver via Groups.Io wrote:

I use FreemakeVC.  It will convert a boat load of video formats.  It will also rip and burn videos.


There is a free version which runs a little slower and a paid version which runs faster and which allows a few more features.  I have used both and only purchased the paid version for the increased speed. It wasn't bad on the free version but I was ripping our video library and decided the increased speed was worth it. We have over 600 movies we have collected over the years.


Hope this helps.


Dan Beaver

On 3/20/2019 3:06 PM, Armando Maldonado wrote:
Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando
-- 
Dan Beaver (KC4DOY)
-- 
Dan Beaver (KC4DOY)


Re: Video converting software that works with windows 10 and NVDA

Armando Maldonado
 

Thanks, what I actually meant was video editing software. But I will definitely keep this in mind. :)
Best, Armando

----- Original Message -----
From: Dan Beaver
Sent: Wednesday, March 20, 2019 1:29 PM
Subject: Re: [nvda] Video converting software that works with windows 10 and NVDA

I use FreemakeVC.  It will convert a boat load of video formats.  It will also rip and burn videos.


There is a free version which runs a little slower and a paid version which runs faster and which allows a few more features.  I have used both and only purchased the paid version for the increased speed. It wasn't bad on the free version but I was ripping our video library and decided the increased speed was worth it. We have over 600 movies we have collected over the years.


Hope this helps.


Dan Beaver

On 3/20/2019 3:06 PM, Armando Maldonado wrote:
Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando
-- 
Dan Beaver (KC4DOY)


Re: Video converting software that works with windows 10 and NVDA

Dan Beaver
 

I use FreemakeVC.  It will convert a boat load of video formats.  It will also rip and burn videos.


There is a free version which runs a little slower and a paid version which runs faster and which allows a few more features.  I have used both and only purchased the paid version for the increased speed. It wasn't bad on the free version but I was ripping our video library and decided the increased speed was worth it. We have over 600 movies we have collected over the years.


Hope this helps.


Dan Beaver

On 3/20/2019 3:06 PM, Armando Maldonado wrote:
Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando
-- 
Dan Beaver (KC4DOY)


Re: win7 security

 

Weird, the only thing I noticed was that yesterday's update for defs was majorly delayed yesterday, thats also fixed as of today, so I suspect a corrupted update file was inadvertantly released.

On 20/03/2019 9:20 PM, Brian's Mail list account via Groups.Io wrote:
Rebooting did not cure it yesterday, only making it think an earlier update was running worked by replacing the registry.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Gene" <gsasner@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, March 20, 2019 3:50 AM
Subject: Re: [nvda] win7 security


It was likely a false alarm.  Have you rebooted since?  If you reboot and you get no such message, it is very unlikely anything to worry about.  if you reboot and do get such a message, what screen-reader are you using?  I suspect the message also said something like click here to address the problem.

However, if you want to check your security settings before doing any of this, do the following:
Open the start menu.  Type the word security.
Then after a moment, read the current line.  If it isn't what you want, look through many of the options.  Down arrow through them. If you find what you want, press enter.

You will find what you want, as one of the items says chec security status. I just checked.

One of the main improvements in Windows 7 is that you don't have to look for things as you did in XP.  Use the start menu search and you'll fined most things, even if you don't know what they are called.  The start menu search is designed to find things when the technical or exact words aren't used. for example, use the start menu search to search for uninstall programs or uninstall a program.  You will find relevant results even though you didn't use the technical name.  I don't remember it any more.  But you will find entries in plain English such as remove a program.

This is important to know not only for Windows 7 but, though I haven't checked because I haven't used higher versions of Windows, I'm sure they all have this feature.

Gene
----- Original Message -----

From: Monte Single
Sent: Tuesday, March 19, 2019 10:20 PM
To: nvda@nvda.groups.io
Subject: [nvda] win7 security


HI folks,



Yesterday I  got a popup on my win 7 machine saying windows security was turned off.  Don't think I've heard that in all the years I have had this pc.

Where do I look to find status of win security.

Thanks,

Monte








Video converting software that works with windows 10 and NVDA

Armando Maldonado
 

Hello, as I'm about to take a trip soon, I was wondering of the following. Has anyone here tried any video editing software that would work well with NVDA and Windows 10? Any suggestions would very much be appreciated.
Best,
Armando


Re: another Zotero question

Sally Kiebdaj
 

Can you be more specific with what you have tried and what isn't working? 
Sally 

On Wed, Mar 20, 2019 at 10:11 AM pankaj singh Kushwaha <pankaj.jnu11@...> wrote:
Thanks friends, Keep discussing Zotero and its accessibility. I'm
trying to use zotero for my research purpose. till today, I'm unable.
Please guide me step by step.
thanks  I'll waitfor valuable response.

On 3/20/19, Sally Kiebdaj <fiddle.pup@...> wrote:
> This message is eligible for Automatic Cleanup! (fiddle.pup@...)
> Add cleanup rule:
> https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3DeJZlptzcRi9%252BLbHHSiQpHY4CAe47zRP%252BJ1uQFnv6eH0%253D%26token%3DmturiVskJvsuLMzFTEPlfKEV0c2yEGj1SAYJpck%252FNE4YLwgXLLq%252F61ptRimm35kGKtg4Md1co7Sq6Cyim558oqObInWU8XQQzZzL1OjHSRTniRzfbaJhnUg%252F%252BI3WugXzYnJNyExZsbg%253D&tc_serial=48904827748&tc_rand=601632310&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001
> More info:
> http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=48904827748&tc_rand=601632310&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001
>


--
Pankaj Singh Kushwaha
Ph.D. Research Scholar,
Centre for European Studies,
School of International Studies, "SIS" J.N.u. New Dehli 110067.
Mobile: +919868610216
E.Mail: pankaj.jnu11@...
Facebook: I.D.: Pankaj.jnu11@...
Institutional mail: pankaj44_isl@...




Re: another Zotero question

pankaj singh Kushwaha
 

Thanks friends, Keep discussing Zotero and its accessibility. I'm
trying to use zotero for my research purpose. till today, I'm unable.
Please guide me step by step.
thanks I'll waitfor valuable response.

--
Pankaj Singh Kushwaha
Ph.D. Research Scholar,
Centre for European Studies,
School of International Studies, "SIS" J.N.u. New Dehli 110067.
Mobile: +919868610216
E.Mail: pankaj.jnu11@gmail.com
Facebook: I.D.: Pankaj.jnu11@gmail.com
Institutional mail: pankaj44_isl@jnu.ac.in


Re: added the Ribbon tutorial to our wiki.

 

Below is the topic link. I gave Brian credit and added some more headings, but still gotta fix the lists though. I'm not sharing the wiki page link again because that is in my first message in the archive. The archive link is below.

https://nvda.groups.io/g/nvda/topic/added_the_ribbon_tutorial_to/30453673?p=,,,100,0,0,0::recentpostdate%2Fsticky,,,100,2,0,30453673


Re: image describer addon for NVDA

Mallard <mallard@...>
 

In fact, Oliver, should you have a way to receive donations (Paypal or something), I'd love to contribute at least to expenses.


I appreciate your generosity and that you want this add-on to ve a gift. If I can make a donation, therefore, it won't be a payment, but a gift in its own right. A gift of joyful gratitude to a very capable and generous person.


Ciao,

Ollie

Il 20/03/2019 12:21, Sile via Groups.Io ha scritto:
I agree.


--Sile

On 3/19/2019 10:42 PM, Kwork wrote:
So, I wonder how many people work on the Jaws picture smart? Probably more than one. Remember this this is probably a one man job so far, one who is communicating with us and open to suggestions. I find it a bit unfair to compare something with a retail product where money is likely being exchanged for the research and development. Not only is Oliver not receiving a dime so far for this add-on, but he is fronting the bill himself for the image describing that is available so far.

Travis

On 3/19/2019 2:56 PM, Don H wrote:
I appreciate any effort anyone puts into giving us users great addons for NVDA.

The new Image describer addon doesn't even come close to what the new Jaws Picture smart has to offer.  Sure hope the image describer addon continues to be developed.








Re: another Zotero question

Sally Kiebdaj
 

Hello,

I have not yet tried this but have noticed in the context menue that a duplication option is listed. Have you found this and tried it yet? 

Place focus on the tree list of citations and select the one you wish to duplicate. Then press shift +F10 to reach the context menu. 

Does that help any?
Sally 


Re: image describer addon for NVDA

Sile
 

I agree.


--Sile

On 3/19/2019 10:42 PM, Kwork wrote:
So, I wonder how many people work on the Jaws picture smart? Probably more than one. Remember this this is probably a one man job so far, one who is communicating with us and open to suggestions. I find it a bit unfair to compare something with a retail product where money is likely being exchanged for the research and development. Not only is Oliver not receiving a dime so far for this add-on, but he is fronting the bill himself for the image describing that is available so far.

Travis

On 3/19/2019 2:56 PM, Don H wrote:
I appreciate any effort anyone puts into giving us users great addons for NVDA.

The new Image describer addon doesn't even come close to what the new Jaws Picture smart has to offer.  Sure hope the image describer addon continues to be developed.






Re: How to tell NVDA which ONeCore voice shoud be used with language switching

bering.p
 

Hello Sylvie,
I'm afraid that this is not possible today.
NVDA is looking in an ordered list to the voice that matches the language and stops at the first voice found.
I'll see if I can do something in my module.

Paul.

Le 19/03/2019 10:52, Sylvie Duchateau a écrit :
Hello all,

I have several voices in several languages installed on Windows as
OneCore voices.

By default, I use a French male voice, Paul.

For English, I have several voices: Hazel, Mark, Susan, Zira, David, George.

I have activated language switching and dialect switching in the speech
options.

So when I come on a web page, let's say, nvaccess.org, Mark is speaking.

If I want that NVAccess web site should be read with Hazer or Susan, is
there a way to tell him to do so without using a specific profile?

Same question, if I am on a page that is written in French and English,
I would rather have the language changes read by Hazer instead of Mark
and that NVDA then returns to the French speaking Paul.

Thank you for your help.

Best

Sylvie