Date   

Re: Code Factory Blues

Gene
 

First, why do you want to find another voice if all you need to do is reregister the Code Factory Voice, especially if you want Eloquence?  As far as I know, registration is free.  I believe, though you can check, that if you run NVDA once a month with the voice, you will remain registered.  So just running it for a moment with the Eloquence voice should be all you need to do.
 
As far as changing to the Microsoft voice on your computer is concerned, are you using the SAPI version of Eloquence or the Add-on?  It may affect how you run the Microsoft voice.  I'm not sure I can tell you just how to switch but answering my question may make it easier for you to find out.
 
Gene

----- Original Message -----
Sent: Friday, April 05, 2019 11:26 AM
Subject: [nvda] Code Factory Blues

Hi, All:

I'm once again trying to learn NVDA after many years as a JAWS user
running 64 bit Windows 7 Home.

One of my problems is that my attempts keep being interrupted by one
thing or another and I have to start virtually all over from scratch.  I
purchased a couple of Code Factory voices  with one being an Eloquence
that sounds reasonably like the Eloquence with JAWS that I'm used to.
Apparently, I upset Code Factory by not loading NVDA frequently enough
for them since the voice switched to something else from Eloquence that
it had been on the last time I used NVDA and I apparently have to
re-register the Code Factory voice again.  This will be the third time
and I'll be in search of another synthesizer since I have a problem
understanding eSpeak or whatever the current one is.  Could someone
please remind me how to find out what the current one is?  During one of
my previous attempts, I found that the SAPI voice for Win 7 was easier
to understand than eSpeak, but can't remember how to switch.  Could some
kind person please provide instructions?

I'll check out voices again when I can get NVDA more understandable, but
does anyone know if there has been anything new other than from Code
Factory in the last several months that works with Win 7?

I seem to be running NVDA 2018.1.1.

Any help would be greatly appreciated.

Margaret



Code Factory Blues

Margaret Thomas <iluvtoread@...>
 

Hi, All:

I'm once again trying to learn NVDA after many years as a JAWS user running 64 bit Windows 7 Home.

One of my problems is that my attempts keep being interrupted by one thing or another and I have to start virtually all over from scratch. I purchased a couple of Code Factory voices with one being an Eloquence that sounds reasonably like the Eloquence with JAWS that I'm used to. Apparently, I upset Code Factory by not loading NVDA frequently enough for them since the voice switched to something else from Eloquence that it had been on the last time I used NVDA and I apparently have to re-register the Code Factory voice again. This will be the third time and I'll be in search of another synthesizer since I have a problem understanding eSpeak or whatever the current one is. Could someone please remind me how to find out what the current one is? During one of my previous attempts, I found that the SAPI voice for Win 7 was easier to understand than eSpeak, but can't remember how to switch. Could some kind person please provide instructions?

I'll check out voices again when I can get NVDA more understandable, but does anyone know if there has been anything new other than from Code Factory in the last several months that works with Win 7?

I seem to be running NVDA 2018.1.1.

Any help would be greatly appreciated.

Margaret


In ms word how to search a particular word

Mohd. Ahtesham Shaikh
 

 How can I search a word in Microsoft document and move the focus of the cursor once I have found that particular word 
 Similarly I have problems searching words in PDF documents.
 Your support will be highly appreciated 

Ahtesham

From India


Re: Quick Question

Gene
 

It appears that what is wanted is an indication of a capital letter when reading, not arrowing letter by letter.  This has been needed for a long time in NVDA.
 
Gene

----- Original Message -----
Sent: Friday, April 05, 2019 9:52 AM
Subject: Re: [nvda] Quick Question

This does exist. It's in settings under speech. In the synth area there
are choices of pitch change for caps or "say cap" If say cap is on, then
whenever you arrow across a capital letter, it will say the word cap
before the letter. I think this is what you want.

Roger







On 4/5/2019 4:12 AM, Ed Marquette wrote:
> All:
> I am relatively new to NVDA, but I think I have searched the manual thoroughly.
> Knowing whether words are or are not capitalized is crucial in my work; however, it is too time consuming to read by letter.  Is there a way to cause NVDA to announce capitalization of words when reading by line, sentence, or paragraph?
> This may be the only feature in JAWS that I really miss.
>
> Ps
>
> I didn’t see this as a feature in any add-ins either.
>
>
>
>




Re: Weather Plus 5.0 update available

Inam Uddin
 

Have you seen my log?

If not,

Here is another time.

INFO - __main__ (21:27:08.328):

Starting NVDA

INFO - core.main (21:27:09.095):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (21:27:09.095):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (21:27:09.188):

NVDA version 2019.1

INFO - core.main (21:27:09.188):

Using Windows version 10.0.17763 workstation

INFO - core.main (21:27:09.188):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (21:27:09.188):

Using comtypes version 1.1.3

INFO - core.main (21:27:09.188):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (21:27:09.884):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (21:27:10.441):

Loaded synthDriver espeak

INFO - core.main (21:27:10.441):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (21:27:10.441):

Braille input initialized

INFO - braille.initialize (21:27:10.447):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (21:27:10.447):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (21:27:10.486):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (21:27:10.496):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (21:27:16.598):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (21:27:16.645):

MathPlayer 4 not available

INFO - core.main (21:27:16.714):

NVDA initialized

ERROR - unhandled exception (21:27:41.312):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriani Botez
Sent: Friday, April 5, 2019 5:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hello, what exactly is not working? Can you see the addons settings?

Is a firewall jnstalled which blocks third party connections?

 

Best

Adriani

 

Von meinem iPhone gesendet


Am 05.04.2019 um 11:25 schrieb Inam Uddin via Groups.Io <charlsdarwin1969@...>:

Dear I’m using the latest version but unfortunetly the addon is not working!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, April 5, 2019 11:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

Hi,

You didn't specify the exact version, I had made an update after the 5.0 with Apixu: Version: 5.0 - 18.03.2019

If the date of your version is older try to see if the latest version is available:

nvda menu,  preferences submenu, weather plus settings submenu, check for upgrade...

otherwise download directly: http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

Let them know

 

Regards

Adrianio

 

Il 05/04/2019 01:24, Inam Uddin via Groups.Io ha scritto:

Dear friends, here is the log after trying weather addon and it is not working.

 

INFO - __main__ (04:20:42.190):

Starting NVDA

INFO - core.main (04:20:42.538):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (04:20:42.538):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (04:20:42.622):

NVDA version 2019.1

INFO - core.main (04:20:42.622):

Using Windows version 10.0.17763 workstation

INFO - core.main (04:20:42.622):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (04:20:42.622):

Using comtypes version 1.1.3

INFO - core.main (04:20:42.622):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (04:20:43.000):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (04:20:43.085):

Loaded synthDriver espeak

INFO - core.main (04:20:43.085):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (04:20:43.085):

Braille input initialized

INFO - braille.initialize (04:20:43.089):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (04:20:43.089):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (04:20:43.119):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (04:20:43.130):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (04:20:45.456):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (04:20:45.466):

MathPlayer 4 not available

INFO - core.main (04:20:45.473):

NVDA initialized

ERROR - unhandled exception (04:22:04.048):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Gene
Sent: Thursday, April 4, 2019 12:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

This list, as most, doesn't allow attachments because of the malware risk..  also, you don't explain anything about why anyone would want the attachment.  If you want to make something available, you can send a link to it on a service like Drop Box.

 

Gene

----- Original Message -----

 

Sent: Wednesday, April 03, 2019 1:32 PM

Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

                Dear friend, please find attachment!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Wednesday, April 3, 2019 3:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hi,

Just out of curiosity, you can send the log, even if this version that uses Apixu has momentarily abandoned.

Thanks

 

Regards

adriano

 

You can wait for the new version 6.0 that will return to using the Yahoo weather API.

 

Il 03/04/2019 06:09, Inam Uddin via Groups.Io ha scritto:

Dear friends, according to the instructions, I’m going to weather setting sub menue and pressing enter on set city but it is not working it is giving me the sound and returning to me to the desktop!

What am I doing wrong?

Please help me in this regards as soon as possible!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Kwork
Sent: Thursday, March 14, 2019 5:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

With the Weather Plus add-on installed, go to the NVDA menu, preferences

submenu, then arrow down to weather plus settings.

 

Expand that, then down arrow to documentation and press enter. Then open

the file entitled Weather Plus First Settings.html and follow the

directions.

 

Travis

 

On 3/13/2019 5:25 PM, Curtis Delzer wrote:

> where do I find such a key?

> On 3/13/2019 4:10 PM, Don H wrote:

>> Have to make sure that the key you put in does not have any empty

>> spaces at the end of it.

>> 

>> On 3/13/2019 5:49 PM, Curtis Delzer wrote:

>>> I put in my zip code in that "combo box," and there was no "OK" button.

>>> 

>>> On 3/13/2019 12:18 PM, Ron Canazzi wrote:

>>>> An easier way is to open the Weather Plus settings and choose

>>>> documentation. It takes you to the folder where 5 files including

>>>> read me first are located.

>>>> 

>>>> 

>>>> On 3/13/2019 6:30 AM, Hermann-Josef Kurzen wrote:

>>>>> Hi Gary,

>>>>> 

>>>>> unfortunately Adriano didn't tell where to find the file "weather

>>>>> first settings.html".

>>>>> I've found it under:

>>>>> j:\AppData\Roaming\nvda\addons\Weather Plus\doc

>>>>> where j:\ is my users directory. The right folder for You is "en"

>>>>> And in this folder there is the file "weather plus first

>>>>> settings.html".

>>>>> 

>>>>> 

>>>>> Greetings - Hermann

>>>>> 

>>>>> 

>>>>> 

>>>>> --- Ursprüngliche Nachricht ---

>>>>>> Von:         "Gary Metzler" <gmtravel@...>  Wichtigkeit

>>>>>> Normal

>>>>>> Lesebestätigung wurde nicht angefordert

>>>>>> Gesendet am: Mi, 13. März 2019 05:36:04 -0400

>>>>>> An:          nvda@nvda.groups.io;

>>>>>> CC:

>>>>>> Betreff:     Re: [nvda] Weather Plus 5.0 update available

>>>>>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>>>>>> 

>>>>>> Hi Adriano,

>>>>>> 

>>>>>> I can't seem to find the read me 1st file.  Also, how do I get a

>>>>>> key?  Thanks for any help.

>>>>>> 

>>>>>> -----Original Message-----

>>>>>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of

>>>>>> Adriano Barbieri via Groups.Io

>>>>>> Sent: Wednesday, March 13, 2019 3:07 AM

>>>>>> To: nvda-addons@nvda-addons.groups.io; nvda <nvda@nvda.groups.io>

>>>>>> Subject: [nvda] Weather Plus 5.0 update available

>>>>>> 

>>>>>> Hi to every one,

>>>>>> 

>>>>>> After more than 2 months it is back in operative :)

>>>>>> 

>>>>>> Changes in this new version:

>>>>>> 

>>>>>> . Weather Plus now uses the APIXU API, in my opinion better than

>>>>>> the previous one; To work requires an API key, read the Weather

>>>>>> Plus First Settings.html for instructions (highly recommended).

>>>>>> #Changes in the Weather Plus Settings window:

>>>>>> . Removed old checkbox "State of barometric pressure".

>>>>>> . Replaced with new checkbox "Add cloudiness value"; It gives you

>>>>>> the percentage of cloudiness.

>>>>>> . Added new checkbox "Add precipitation value"; It gives you the

>>>>>> amount in millimeters or inches of precipitation.

>>>>>> . Removed old checkbox "Indicates the wait with a beep while you

>>>>>> search for the latest bulletin"; Left active by default.

>>>>>> . Added to the Astronomic informations;

>>>>>> Time of moonrise and moonset.

>>>>>> . Added new button "Rename";

>>>>>> To rename cities more conveniently.

>>>>>> . Improved function of the "Test" button; Now accept some

>>>>>> commands to facilitate the search for cities; These new commands

>>>>>> are described in the help function that can be called up with F1.

>>>>>> . Added button to manage your API key.

>>>>>> 

>>>>>> Weather Plus can update itself, however you can download it

>>>>>> directly from:

>>>>>> 

>>>>>> . http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

>>>>>> 

>>>>>> or from the pages:

>>>>>> 

>>>>>> . http://www.nvda.it/weather-plus#main-content

>>>>>> 

>>>>>> . https://addons.nvda-project.org/addons/weatherPlus.en.html

>>>>>> 

>>>>>> If the file extension arrives as .zip,please correct it with

>>>>>> .nvda-addon.

>>>>>> 

>>>>>> 

>>>>>> Cheers

>>>>>> 

>>>>>> adriano

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>> 

>>>>> 

>>>>> 

>>>>> 

>> 

>> 

>> 

>> 

 

 

 

 

 

 

 


Re: Weather Plus 5.0 update available

Inam Uddin
 

The only thing could be possible is that I will give my system access via remote addon.

If you can give me your precious time, I will be much thankfull to you!

Please let me know that at what time according to GMT could be possible for that!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriani Botez
Sent: Friday, April 5, 2019 5:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hello, what exactly is not working? Can you see the addons settings?

Is a firewall jnstalled which blocks third party connections?

 

Best

Adriani

 

Von meinem iPhone gesendet


Am 05.04.2019 um 11:25 schrieb Inam Uddin via Groups.Io <charlsdarwin1969@...>:

Dear I’m using the latest version but unfortunetly the addon is not working!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, April 5, 2019 11:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

Hi,

You didn't specify the exact version, I had made an update after the 5.0 with Apixu: Version: 5.0 - 18.03.2019

If the date of your version is older try to see if the latest version is available:

nvda menu,  preferences submenu, weather plus settings submenu, check for upgrade...

otherwise download directly: http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

Let them know

 

Regards

Adrianio

 

Il 05/04/2019 01:24, Inam Uddin via Groups.Io ha scritto:

Dear friends, here is the log after trying weather addon and it is not working.

 

INFO - __main__ (04:20:42.190):

Starting NVDA

INFO - core.main (04:20:42.538):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (04:20:42.538):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (04:20:42.622):

NVDA version 2019.1

INFO - core.main (04:20:42.622):

Using Windows version 10.0.17763 workstation

INFO - core.main (04:20:42.622):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (04:20:42.622):

Using comtypes version 1.1.3

INFO - core.main (04:20:42.622):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (04:20:43.000):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (04:20:43.085):

Loaded synthDriver espeak

INFO - core.main (04:20:43.085):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (04:20:43.085):

Braille input initialized

INFO - braille.initialize (04:20:43.089):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (04:20:43.089):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (04:20:43.119):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (04:20:43.130):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (04:20:45.456):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (04:20:45.466):

MathPlayer 4 not available

INFO - core.main (04:20:45.473):

NVDA initialized

ERROR - unhandled exception (04:22:04.048):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Gene
Sent: Thursday, April 4, 2019 12:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

This list, as most, doesn't allow attachments because of the malware risk..  also, you don't explain anything about why anyone would want the attachment.  If you want to make something available, you can send a link to it on a service like Drop Box.

 

Gene

----- Original Message -----

 

Sent: Wednesday, April 03, 2019 1:32 PM

Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

                Dear friend, please find attachment!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Wednesday, April 3, 2019 3:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hi,

Just out of curiosity, you can send the log, even if this version that uses Apixu has momentarily abandoned.

Thanks

 

Regards

adriano

 

You can wait for the new version 6.0 that will return to using the Yahoo weather API.

 

Il 03/04/2019 06:09, Inam Uddin via Groups.Io ha scritto:

Dear friends, according to the instructions, I’m going to weather setting sub menue and pressing enter on set city but it is not working it is giving me the sound and returning to me to the desktop!

What am I doing wrong?

Please help me in this regards as soon as possible!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Kwork
Sent: Thursday, March 14, 2019 5:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

With the Weather Plus add-on installed, go to the NVDA menu, preferences

submenu, then arrow down to weather plus settings.

 

Expand that, then down arrow to documentation and press enter. Then open

the file entitled Weather Plus First Settings.html and follow the

directions.

 

Travis

 

On 3/13/2019 5:25 PM, Curtis Delzer wrote:

> where do I find such a key?

> On 3/13/2019 4:10 PM, Don H wrote:

>> Have to make sure that the key you put in does not have any empty

>> spaces at the end of it.

>> 

>> On 3/13/2019 5:49 PM, Curtis Delzer wrote:

>>> I put in my zip code in that "combo box," and there was no "OK" button.

>>> 

>>> On 3/13/2019 12:18 PM, Ron Canazzi wrote:

>>>> An easier way is to open the Weather Plus settings and choose

>>>> documentation. It takes you to the folder where 5 files including

>>>> read me first are located.

>>>> 

>>>> 

>>>> On 3/13/2019 6:30 AM, Hermann-Josef Kurzen wrote:

>>>>> Hi Gary,

>>>>> 

>>>>> unfortunately Adriano didn't tell where to find the file "weather

>>>>> first settings.html".

>>>>> I've found it under:

>>>>> j:\AppData\Roaming\nvda\addons\Weather Plus\doc

>>>>> where j:\ is my users directory. The right folder for You is "en"

>>>>> And in this folder there is the file "weather plus first

>>>>> settings.html".

>>>>> 

>>>>> 

>>>>> Greetings - Hermann

>>>>> 

>>>>> 

>>>>> 

>>>>> --- Ursprüngliche Nachricht ---

>>>>>> Von:         "Gary Metzler" <gmtravel@...>  Wichtigkeit

>>>>>> Normal

>>>>>> Lesebestätigung wurde nicht angefordert

>>>>>> Gesendet am: Mi, 13. März 2019 05:36:04 -0400

>>>>>> An:          nvda@nvda.groups.io;

>>>>>> CC:

>>>>>> Betreff:     Re: [nvda] Weather Plus 5.0 update available

>>>>>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>>>>>> 

>>>>>> Hi Adriano,

>>>>>> 

>>>>>> I can't seem to find the read me 1st file.  Also, how do I get a

>>>>>> key?  Thanks for any help.

>>>>>> 

>>>>>> -----Original Message-----

>>>>>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of

>>>>>> Adriano Barbieri via Groups.Io

>>>>>> Sent: Wednesday, March 13, 2019 3:07 AM

>>>>>> To: nvda-addons@nvda-addons.groups.io; nvda <nvda@nvda.groups.io>

>>>>>> Subject: [nvda] Weather Plus 5.0 update available

>>>>>> 

>>>>>> Hi to every one,

>>>>>> 

>>>>>> After more than 2 months it is back in operative :)

>>>>>> 

>>>>>> Changes in this new version:

>>>>>> 

>>>>>> . Weather Plus now uses the APIXU API, in my opinion better than

>>>>>> the previous one; To work requires an API key, read the Weather

>>>>>> Plus First Settings.html for instructions (highly recommended).

>>>>>> #Changes in the Weather Plus Settings window:

>>>>>> . Removed old checkbox "State of barometric pressure".

>>>>>> . Replaced with new checkbox "Add cloudiness value"; It gives you

>>>>>> the percentage of cloudiness.

>>>>>> . Added new checkbox "Add precipitation value"; It gives you the

>>>>>> amount in millimeters or inches of precipitation.

>>>>>> . Removed old checkbox "Indicates the wait with a beep while you

>>>>>> search for the latest bulletin"; Left active by default.

>>>>>> . Added to the Astronomic informations;

>>>>>> Time of moonrise and moonset.

>>>>>> . Added new button "Rename";

>>>>>> To rename cities more conveniently.

>>>>>> . Improved function of the "Test" button; Now accept some

>>>>>> commands to facilitate the search for cities; These new commands

>>>>>> are described in the help function that can be called up with F1.

>>>>>> . Added button to manage your API key.

>>>>>> 

>>>>>> Weather Plus can update itself, however you can download it

>>>>>> directly from:

>>>>>> 

>>>>>> . http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

>>>>>> 

>>>>>> or from the pages:

>>>>>> 

>>>>>> . http://www.nvda.it/weather-plus#main-content

>>>>>> 

>>>>>> . https://addons.nvda-project.org/addons/weatherPlus.en.html

>>>>>> 

>>>>>> If the file extension arrives as .zip,please correct it with

>>>>>> .nvda-addon.

>>>>>> 

>>>>>> 

>>>>>> Cheers

>>>>>> 

>>>>>> adriano

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>> 

>>>>> 

>>>>> 

>>>>> 

>> 

>> 

>> 

>> 

 

 

 

 

 

 

 


Re: Quick Question

Roger Stewart
 

This does exist. It's in settings under speech. In the synth area there are choices of pitch change for caps or "say cap" If say cap is on, then whenever you arrow across a capital letter, it will say the word cap before the letter. I think this is what you want.

Roger

On 4/5/2019 4:12 AM, Ed Marquette wrote:
All:
I am relatively new to NVDA, but I think I have searched the manual thoroughly.
Knowing whether words are or are not capitalized is crucial in my work; however, it is too time consuming to read by letter. Is there a way to cause NVDA to announce capitalization of words when reading by line, sentence, or paragraph?
This may be the only feature in JAWS that I really miss.

Ps

I didn’t see this as a feature in any add-ins either.



Quick Question

Ed Marquette
 

All:
I am relatively new to NVDA, but I think I have searched the manual thoroughly.
Knowing whether words are or are not capitalized is crucial in my work; however, it is too time consuming to read by letter. Is there a way to cause NVDA to announce capitalization of words when reading by line, sentence, or paragraph?
This may be the only feature in JAWS that I really miss.

Ps

I didn’t see this as a feature in any add-ins either.


Re: NVDA and Skype for business

Christian Schoepplein
 

Hi,

thanks everybody for the replys regarding Skype for Business. I don't know
what caused the problems yesterday, but restarting my computer and another
try today was successfull and I can use SFB without problems now.

Cheers,

Schoepp

On Fri, April 5, 2019 2:20 pm, Jason White via Groups.Io wrote:
I don't know what's causing your issue, but Skype for Business has been
working well for me too under both NVDA and JAWS.

On 4/5/19, 02:55, "Bianka Brankovic" <nvda@nvda.groups.io on behalf of
bianka.brankovic@...> wrote:

Hello Schoepp,


interesting, we are using Skype for Business 2015 and chat conversations
and calls are accessible.

Our IT departement might have configured it differently than yours
though.

Could you maybe describe a bit how Skype for Business looks for you?


Thanks and kind regards,


Bianka













Free Accessible Sound Design Course

 

The below comes from the blind gamers group on this site. Enjoy. I'm too lazy to provide links and edit the below message so use it as you wish. Don't ask me questions about sound design. I won't answer them. Direct them to, the, below!


Hi Everyone,

 

Our Ebon Sky Studios sound designer  (Brian, from Daisy Ale Sound works) is doing an  online video series about sound design . Brian, is sighted, but will be doing the course using a screen reader, so that everyone can follow what he is doing on screen and which will ensure everything he is doing is accessible to a screen reader user. for anyone interested in learning more  about sound design you can follow the topic on the audio games forum, where he’ll be posting videos  , setting assignments and commenting on questions asked. If you’re interested at all in sound design, or want to learn some tips and tricks you can check out the topic on the audio games forum at the below link

 

https://forum.audiogames.net/topic/28100/accessible-sound-design-course-first-lesson-up/

 

The Ebon Sky Studios Team

email: info@...

Facebook: https://m.facebook.com/ebonskystudios/

Twitter: @ebonskystudios



Re: Weather Plus 5.0 update available

Adriani Botez
 

Hello, what exactly is not working? Can you see the addons settings?
Is a firewall jnstalled which blocks third party connections?

Best
Adriani


Von meinem iPhone gesendet

Am 05.04.2019 um 11:25 schrieb Inam Uddin via Groups.Io <charlsdarwin1969@...>:

Dear I’m using the latest version but unfortunetly the addon is not working!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, April 5, 2019 11:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

Hi,

You didn't specify the exact version, I had made an update after the 5.0 with Apixu: Version: 5.0 - 18.03.2019

If the date of your version is older try to see if the latest version is available:

nvda menu,  preferences submenu, weather plus settings submenu, check for upgrade...

otherwise download directly: http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

Let them know

 

Regards

Adrianio

 

Il 05/04/2019 01:24, Inam Uddin via Groups.Io ha scritto:

Dear friends, here is the log after trying weather addon and it is not working.

 

INFO - __main__ (04:20:42.190):

Starting NVDA

INFO - core.main (04:20:42.538):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (04:20:42.538):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (04:20:42.622):

NVDA version 2019.1

INFO - core.main (04:20:42.622):

Using Windows version 10.0.17763 workstation

INFO - core.main (04:20:42.622):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (04:20:42.622):

Using comtypes version 1.1.3

INFO - core.main (04:20:42.622):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (04:20:43.000):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (04:20:43.085):

Loaded synthDriver espeak

INFO - core.main (04:20:43.085):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (04:20:43.085):

Braille input initialized

INFO - braille.initialize (04:20:43.089):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (04:20:43.089):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (04:20:43.119):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (04:20:43.130):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (04:20:45.456):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (04:20:45.466):

MathPlayer 4 not available

INFO - core.main (04:20:45.473):

NVDA initialized

ERROR - unhandled exception (04:22:04.048):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Gene
Sent: Thursday, April 4, 2019 12:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

This list, as most, doesn't allow attachments because of the malware risk..  also, you don't explain anything about why anyone would want the attachment.  If you want to make something available, you can send a link to it on a service like Drop Box.

 

Gene

----- Original Message -----

 

Sent: Wednesday, April 03, 2019 1:32 PM

Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

                Dear friend, please find attachment!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Wednesday, April 3, 2019 3:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hi,

Just out of curiosity, you can send the log, even if this version that uses Apixu has momentarily abandoned.

Thanks

 

Regards

adriano

 

You can wait for the new version 6.0 that will return to using the Yahoo weather API.

 

Il 03/04/2019 06:09, Inam Uddin via Groups.Io ha scritto:

Dear friends, according to the instructions, I’m going to weather setting sub menue and pressing enter on set city but it is not working it is giving me the sound and returning to me to the desktop!

What am I doing wrong?

Please help me in this regards as soon as possible!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Kwork
Sent: Thursday, March 14, 2019 5:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

With the Weather Plus add-on installed, go to the NVDA menu, preferences

submenu, then arrow down to weather plus settings.

 

Expand that, then down arrow to documentation and press enter. Then open

the file entitled Weather Plus First Settings.html and follow the

directions.

 

Travis

 

On 3/13/2019 5:25 PM, Curtis Delzer wrote:

> where do I find such a key?

> On 3/13/2019 4:10 PM, Don H wrote:

>> Have to make sure that the key you put in does not have any empty

>> spaces at the end of it.

>> 

>> On 3/13/2019 5:49 PM, Curtis Delzer wrote:

>>> I put in my zip code in that "combo box," and there was no "OK" button.

>>> 

>>> On 3/13/2019 12:18 PM, Ron Canazzi wrote:

>>>> An easier way is to open the Weather Plus settings and choose

>>>> documentation. It takes you to the folder where 5 files including

>>>> read me first are located.

>>>> 

>>>> 

>>>> On 3/13/2019 6:30 AM, Hermann-Josef Kurzen wrote:

>>>>> Hi Gary,

>>>>> 

>>>>> unfortunately Adriano didn't tell where to find the file "weather

>>>>> first settings.html".

>>>>> I've found it under:

>>>>> j:\AppData\Roaming\nvda\addons\Weather Plus\doc

>>>>> where j:\ is my users directory. The right folder for You is "en"

>>>>> And in this folder there is the file "weather plus first

>>>>> settings.html".

>>>>> 

>>>>> 

>>>>> Greetings - Hermann

>>>>> 

>>>>> 

>>>>> 

>>>>> --- Ursprüngliche Nachricht ---

>>>>>> Von:         "Gary Metzler" <gmtravel@...>  Wichtigkeit

>>>>>> Normal

>>>>>> Lesebestätigung wurde nicht angefordert

>>>>>> Gesendet am: Mi, 13. März 2019 05:36:04 -0400

>>>>>> An:          nvda@nvda.groups.io;

>>>>>> CC:

>>>>>> Betreff:     Re: [nvda] Weather Plus 5.0 update available

>>>>>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>>>>>> 

>>>>>> Hi Adriano,

>>>>>> 

>>>>>> I can't seem to find the read me 1st file.  Also, how do I get a

>>>>>> key?  Thanks for any help.

>>>>>> 

>>>>>> -----Original Message-----

>>>>>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of

>>>>>> Adriano Barbieri via Groups.Io

>>>>>> Sent: Wednesday, March 13, 2019 3:07 AM

>>>>>> To: nvda-addons@nvda-addons.groups.io; nvda <nvda@nvda.groups.io>

>>>>>> Subject: [nvda] Weather Plus 5.0 update available

>>>>>> 

>>>>>> Hi to every one,

>>>>>> 

>>>>>> After more than 2 months it is back in operative :)

>>>>>> 

>>>>>> Changes in this new version:

>>>>>> 

>>>>>> . Weather Plus now uses the APIXU API, in my opinion better than

>>>>>> the previous one; To work requires an API key, read the Weather

>>>>>> Plus First Settings.html for instructions (highly recommended).

>>>>>> #Changes in the Weather Plus Settings window:

>>>>>> . Removed old checkbox "State of barometric pressure".

>>>>>> . Replaced with new checkbox "Add cloudiness value"; It gives you

>>>>>> the percentage of cloudiness.

>>>>>> . Added new checkbox "Add precipitation value"; It gives you the

>>>>>> amount in millimeters or inches of precipitation.

>>>>>> . Removed old checkbox "Indicates the wait with a beep while you

>>>>>> search for the latest bulletin"; Left active by default.

>>>>>> . Added to the Astronomic informations;

>>>>>> Time of moonrise and moonset.

>>>>>> . Added new button "Rename";

>>>>>> To rename cities more conveniently.

>>>>>> . Improved function of the "Test" button; Now accept some

>>>>>> commands to facilitate the search for cities; These new commands

>>>>>> are described in the help function that can be called up with F1.

>>>>>> . Added button to manage your API key.

>>>>>> 

>>>>>> Weather Plus can update itself, however you can download it

>>>>>> directly from:

>>>>>> 

>>>>>> . http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

>>>>>> 

>>>>>> or from the pages:

>>>>>> 

>>>>>> . http://www.nvda.it/weather-plus#main-content

>>>>>> 

>>>>>> . https://addons.nvda-project.org/addons/weatherPlus.en.html

>>>>>> 

>>>>>> If the file extension arrives as .zip,please correct it with

>>>>>> .nvda-addon.

>>>>>> 

>>>>>> 

>>>>>> Cheers

>>>>>> 

>>>>>> adriano

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>> 

>>>>> 

>>>>> 

>>>>> 

>> 

>> 

>> 

>> 

 

 

 

 

 

 


Re: NVDA and Skype for business

Jason White
 

I don't know what's causing your issue, but Skype for Business has been working well for me too under both NVDA and JAWS.

On 4/5/19, 02:55, "Bianka Brankovic" <nvda@nvda.groups.io on behalf of bianka.brankovic@...> wrote:

Hello Schoepp,

interesting, we are using Skype for Business 2015 and chat conversations and calls are accessible.

Our IT departement might have configured it differently than yours though.

Could you maybe describe a bit how Skype for Business looks for you?

Thanks and kind regards,

Bianka


Re: NVDA and sound card

Robert Doc Wright godfearer
 

The easiest way is to use the synthesizer command NVDA+ctrl+s

Tab once

Press enter and it should play through whatever is considered the default sound card.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Kerryn Gunness via Groups.Io
Sent: Thursday, April 4, 2019 7:08 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA and sound card

 

hi group

 

does NVDA have features to work with sound cards?

i mean, if i use NVDA with an external sound card and after removing the sound card, NVDA  went mute

how do you fix this, i mean how to set back NVDA  on your default sound card?

 

thanks

 


Re: Weather Plus 5.0 update available

Adriano Barbieri
 

It seems that it doesn't work just for you.

I cannot help you with this answer, unless you give me more technical indications of the problem.

Thanks!


Regards

Adriano


Il 05/04/2019 11:25, Inam Uddin via Groups.Io ha scritto:

Dear I’m using the latest version but unfortunetly the addon is not working!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, April 5, 2019 11:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

Hi,

You didn't specify the exact version, I had made an update after the 5.0 with Apixu: Version: 5.0 - 18.03.2019

If the date of your version is older try to see if the latest version is available:

nvda menu,  preferences submenu, weather plus settings submenu, check for upgrade...

otherwise download directly: http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

Let them know

 

Regards

Adrianio

 

Il 05/04/2019 01:24, Inam Uddin via Groups.Io ha scritto:

Dear friends, here is the log after trying weather addon and it is not working.

 

INFO - __main__ (04:20:42.190):

Starting NVDA

INFO - core.main (04:20:42.538):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (04:20:42.538):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (04:20:42.622):

NVDA version 2019.1

INFO - core.main (04:20:42.622):

Using Windows version 10.0.17763 workstation

INFO - core.main (04:20:42.622):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (04:20:42.622):

Using comtypes version 1.1.3

INFO - core.main (04:20:42.622):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (04:20:43.000):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (04:20:43.085):

Loaded synthDriver espeak

INFO - core.main (04:20:43.085):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (04:20:43.085):

Braille input initialized

INFO - braille.initialize (04:20:43.089):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (04:20:43.089):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (04:20:43.119):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (04:20:43.130):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (04:20:45.456):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (04:20:45.466):

MathPlayer 4 not available

INFO - core.main (04:20:45.473):

NVDA initialized

ERROR - unhandled exception (04:22:04.048):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Gene
Sent: Thursday, April 4, 2019 12:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

This list, as most, doesn't allow attachments because of the malware risk..  also, you don't explain anything about why anyone would want the attachment.  If you want to make something available, you can send a link to it on a service like Drop Box.

 

Gene

----- Original Message -----

 

Sent: Wednesday, April 03, 2019 1:32 PM

Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

                Dear friend, please find attachment!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Wednesday, April 3, 2019 3:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hi,

Just out of curiosity, you can send the log, even if this version that uses Apixu has momentarily abandoned.

Thanks

 

Regards

adriano

 

You can wait for the new version 6.0 that will return to using the Yahoo weather API.

 

Il 03/04/2019 06:09, Inam Uddin via Groups.Io ha scritto:

Dear friends, according to the instructions, I’m going to weather setting sub menue and pressing enter on set city but it is not working it is giving me the sound and returning to me to the desktop!

What am I doing wrong?

Please help me in this regards as soon as possible!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Kwork
Sent: Thursday, March 14, 2019 5:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

With the Weather Plus add-on installed, go to the NVDA menu, preferences

submenu, then arrow down to weather plus settings.

 

Expand that, then down arrow to documentation and press enter. Then open

the file entitled Weather Plus First Settings.html and follow the

directions.

 

Travis

 

On 3/13/2019 5:25 PM, Curtis Delzer wrote:

> where do I find such a key?

> On 3/13/2019 4:10 PM, Don H wrote:

>> Have to make sure that the key you put in does not have any empty

>> spaces at the end of it.

>> 

>> On 3/13/2019 5:49 PM, Curtis Delzer wrote:

>>> I put in my zip code in that "combo box," and there was no "OK" button.

>>> 

>>> On 3/13/2019 12:18 PM, Ron Canazzi wrote:

>>>> An easier way is to open the Weather Plus settings and choose

>>>> documentation. It takes you to the folder where 5 files including

>>>> read me first are located.

>>>> 

>>>> 

>>>> On 3/13/2019 6:30 AM, Hermann-Josef Kurzen wrote:

>>>>> Hi Gary,

>>>>> 

>>>>> unfortunately Adriano didn't tell where to find the file "weather

>>>>> first settings.html".

>>>>> I've found it under:

>>>>> j:\AppData\Roaming\nvda\addons\Weather Plus\doc

>>>>> where j:\ is my users directory. The right folder for You is "en"

>>>>> And in this folder there is the file "weather plus first

>>>>> settings.html".

>>>>> 

>>>>> 

>>>>> Greetings - Hermann

>>>>> 

>>>>> 

>>>>> 

>>>>> --- Ursprüngliche Nachricht ---

>>>>>> Von:         "Gary Metzler" <gmtravel@...>  Wichtigkeit

>>>>>> Normal

>>>>>> Lesebestätigung wurde nicht angefordert

>>>>>> Gesendet am: Mi, 13. März 2019 05:36:04 -0400

>>>>>> An:          nvda@nvda.groups.io;

>>>>>> CC:

>>>>>> Betreff:     Re: [nvda] Weather Plus 5.0 update available

>>>>>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>>>>>> 

>>>>>> Hi Adriano,

>>>>>> 

>>>>>> I can't seem to find the read me 1st file.  Also, how do I get a

>>>>>> key?  Thanks for any help.

>>>>>> 

>>>>>> -----Original Message-----

>>>>>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of

>>>>>> Adriano Barbieri via Groups.Io

>>>>>> Sent: Wednesday, March 13, 2019 3:07 AM

>>>>>> To: nvda-addons@nvda-addons.groups.io; nvda <nvda@nvda.groups.io>

>>>>>> Subject: [nvda] Weather Plus 5.0 update available

>>>>>> 

>>>>>> Hi to every one,

>>>>>> 

>>>>>> After more than 2 months it is back in operative :)

>>>>>> 

>>>>>> Changes in this new version:

>>>>>> 

>>>>>> . Weather Plus now uses the APIXU API, in my opinion better than

>>>>>> the previous one; To work requires an API key, read the Weather

>>>>>> Plus First Settings.html for instructions (highly recommended).

>>>>>> #Changes in the Weather Plus Settings window:

>>>>>> . Removed old checkbox "State of barometric pressure".

>>>>>> . Replaced with new checkbox "Add cloudiness value"; It gives you

>>>>>> the percentage of cloudiness.

>>>>>> . Added new checkbox "Add precipitation value"; It gives you the

>>>>>> amount in millimeters or inches of precipitation.

>>>>>> . Removed old checkbox "Indicates the wait with a beep while you

>>>>>> search for the latest bulletin"; Left active by default.

>>>>>> . Added to the Astronomic informations;

>>>>>> Time of moonrise and moonset.

>>>>>> . Added new button "Rename";

>>>>>> To rename cities more conveniently.

>>>>>> . Improved function of the "Test" button; Now accept some

>>>>>> commands to facilitate the search for cities; These new commands

>>>>>> are described in the help function that can be called up with F1.

>>>>>> . Added button to manage your API key.

>>>>>> 

>>>>>> Weather Plus can update itself, however you can download it

>>>>>> directly from:

>>>>>> 

>>>>>> . http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

>>>>>> 

>>>>>> or from the pages:

>>>>>> 

>>>>>> . http://www.nvda.it/weather-plus#main-content

>>>>>> 

>>>>>> . https://addons.nvda-project.org/addons/weatherPlus.en.html

>>>>>> 

>>>>>> If the file extension arrives as .zip,please correct it with

>>>>>> .nvda-addon.

>>>>>> 

>>>>>> 

>>>>>> Cheers

>>>>>> 

>>>>>> adriano

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>> 

>>>>> 

>>>>> 

>>>>> 

>> 

>> 

>> 

>> 

 

 

 

 

 

 


Re: Weather Plus 5.0 update available

Inam Uddin
 

Dear I’m using the latest version but unfortunetly the addon is not working!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, April 5, 2019 11:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

Hi,

You didn't specify the exact version, I had made an update after the 5.0 with Apixu: Version: 5.0 - 18.03.2019

If the date of your version is older try to see if the latest version is available:

nvda menu,  preferences submenu, weather plus settings submenu, check for upgrade...

otherwise download directly: http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

Let them know

 

Regards

Adrianio

 

Il 05/04/2019 01:24, Inam Uddin via Groups.Io ha scritto:

Dear friends, here is the log after trying weather addon and it is not working.

 

INFO - __main__ (04:20:42.190):

Starting NVDA

INFO - core.main (04:20:42.538):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (04:20:42.538):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (04:20:42.622):

NVDA version 2019.1

INFO - core.main (04:20:42.622):

Using Windows version 10.0.17763 workstation

INFO - core.main (04:20:42.622):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (04:20:42.622):

Using comtypes version 1.1.3

INFO - core.main (04:20:42.622):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (04:20:43.000):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (04:20:43.085):

Loaded synthDriver espeak

INFO - core.main (04:20:43.085):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (04:20:43.085):

Braille input initialized

INFO - braille.initialize (04:20:43.089):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (04:20:43.089):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (04:20:43.119):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (04:20:43.130):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (04:20:45.456):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (04:20:45.466):

MathPlayer 4 not available

INFO - core.main (04:20:45.473):

NVDA initialized

ERROR - unhandled exception (04:22:04.048):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Gene
Sent: Thursday, April 4, 2019 12:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

This list, as most, doesn't allow attachments because of the malware risk..  also, you don't explain anything about why anyone would want the attachment.  If you want to make something available, you can send a link to it on a service like Drop Box.

 

Gene

----- Original Message -----

 

Sent: Wednesday, April 03, 2019 1:32 PM

Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

                Dear friend, please find attachment!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Wednesday, April 3, 2019 3:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hi,

Just out of curiosity, you can send the log, even if this version that uses Apixu has momentarily abandoned.

Thanks

 

Regards

adriano

 

You can wait for the new version 6.0 that will return to using the Yahoo weather API.

 

Il 03/04/2019 06:09, Inam Uddin via Groups.Io ha scritto:

Dear friends, according to the instructions, I’m going to weather setting sub menue and pressing enter on set city but it is not working it is giving me the sound and returning to me to the desktop!

What am I doing wrong?

Please help me in this regards as soon as possible!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Kwork
Sent: Thursday, March 14, 2019 5:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

With the Weather Plus add-on installed, go to the NVDA menu, preferences

submenu, then arrow down to weather plus settings.

 

Expand that, then down arrow to documentation and press enter. Then open

the file entitled Weather Plus First Settings.html and follow the

directions.

 

Travis

 

On 3/13/2019 5:25 PM, Curtis Delzer wrote:

> where do I find such a key?

> On 3/13/2019 4:10 PM, Don H wrote:

>> Have to make sure that the key you put in does not have any empty

>> spaces at the end of it.

>> 

>> On 3/13/2019 5:49 PM, Curtis Delzer wrote:

>>> I put in my zip code in that "combo box," and there was no "OK" button.

>>> 

>>> On 3/13/2019 12:18 PM, Ron Canazzi wrote:

>>>> An easier way is to open the Weather Plus settings and choose

>>>> documentation. It takes you to the folder where 5 files including

>>>> read me first are located.

>>>> 

>>>> 

>>>> On 3/13/2019 6:30 AM, Hermann-Josef Kurzen wrote:

>>>>> Hi Gary,

>>>>> 

>>>>> unfortunately Adriano didn't tell where to find the file "weather

>>>>> first settings.html".

>>>>> I've found it under:

>>>>> j:\AppData\Roaming\nvda\addons\Weather Plus\doc

>>>>> where j:\ is my users directory. The right folder for You is "en"

>>>>> And in this folder there is the file "weather plus first

>>>>> settings.html".

>>>>> 

>>>>> 

>>>>> Greetings - Hermann

>>>>> 

>>>>> 

>>>>> 

>>>>> --- Ursprüngliche Nachricht ---

>>>>>> Von:         "Gary Metzler" <gmtravel@...>  Wichtigkeit

>>>>>> Normal

>>>>>> Lesebestätigung wurde nicht angefordert

>>>>>> Gesendet am: Mi, 13. März 2019 05:36:04 -0400

>>>>>> An:          nvda@nvda.groups.io;

>>>>>> CC:

>>>>>> Betreff:     Re: [nvda] Weather Plus 5.0 update available

>>>>>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>>>>>> 

>>>>>> Hi Adriano,

>>>>>> 

>>>>>> I can't seem to find the read me 1st file.  Also, how do I get a

>>>>>> key?  Thanks for any help.

>>>>>> 

>>>>>> -----Original Message-----

>>>>>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of

>>>>>> Adriano Barbieri via Groups.Io

>>>>>> Sent: Wednesday, March 13, 2019 3:07 AM

>>>>>> To: nvda-addons@nvda-addons.groups.io; nvda <nvda@nvda.groups.io>

>>>>>> Subject: [nvda] Weather Plus 5.0 update available

>>>>>> 

>>>>>> Hi to every one,

>>>>>> 

>>>>>> After more than 2 months it is back in operative :)

>>>>>> 

>>>>>> Changes in this new version:

>>>>>> 

>>>>>> . Weather Plus now uses the APIXU API, in my opinion better than

>>>>>> the previous one; To work requires an API key, read the Weather

>>>>>> Plus First Settings.html for instructions (highly recommended).

>>>>>> #Changes in the Weather Plus Settings window:

>>>>>> . Removed old checkbox "State of barometric pressure".

>>>>>> . Replaced with new checkbox "Add cloudiness value"; It gives you

>>>>>> the percentage of cloudiness.

>>>>>> . Added new checkbox "Add precipitation value"; It gives you the

>>>>>> amount in millimeters or inches of precipitation.

>>>>>> . Removed old checkbox "Indicates the wait with a beep while you

>>>>>> search for the latest bulletin"; Left active by default.

>>>>>> . Added to the Astronomic informations;

>>>>>> Time of moonrise and moonset.

>>>>>> . Added new button "Rename";

>>>>>> To rename cities more conveniently.

>>>>>> . Improved function of the "Test" button; Now accept some

>>>>>> commands to facilitate the search for cities; These new commands

>>>>>> are described in the help function that can be called up with F1.

>>>>>> . Added button to manage your API key.

>>>>>> 

>>>>>> Weather Plus can update itself, however you can download it

>>>>>> directly from:

>>>>>> 

>>>>>> . http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

>>>>>> 

>>>>>> or from the pages:

>>>>>> 

>>>>>> . http://www.nvda.it/weather-plus#main-content

>>>>>> 

>>>>>> . https://addons.nvda-project.org/addons/weatherPlus.en.html

>>>>>> 

>>>>>> If the file extension arrives as .zip,please correct it with

>>>>>> .nvda-addon.

>>>>>> 

>>>>>> 

>>>>>> Cheers

>>>>>> 

>>>>>> adriano

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>> 

>>>>> 

>>>>> 

>>>>> 

>> 

>> 

>> 

>> 

 

 

 

 

 

 


Re: NVDA and sound card

Brian's Mail list account
 

I have generally found that there is a new default when you remove a usb card, but it often depends on how the windows drivers work or how the sound device appears in the various bits of software on the computer. Windows is a bit of a mess on its sound card support, it is worse in windows 10 than on windows 7 from my experience. Of course it is very possible to set up a screenreader to use one output device while the rest of windows uses another. However sometimes the slightest disturbance seems to screw it up.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Friday, April 05, 2019 3:11 AM
Subject: Re: [nvda] NVDA and sound card


Probably if you just unload NVDA and run it again, it will play through the original sound card. If you haven't changed any settings, it should play through whatever is the default sound card, though for reasons of how sound cards work in Windows, not NVDA reasons, it may not do so automatically and unloading and running NVDA again should correct the problem.

Gene
----- Original Message -----

From: Kerryn Gunness via Groups.Io
Sent: Thursday, April 04, 2019 8:08 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA and sound card


hi group

does NVDA have features to work with sound cards?
i mean, if i use NVDA with an external sound card and after removing the sound card, NVDA went mute
how do you fix this, i mean how to set back NVDA on your default sound card?

thanks


Re: OE Classic 2.9 released

Brian's Mail list account
 

It was a long time ago now. If it will live with the old OE then I might try it. I use pop3 mainly due to its message rules autosorting of messages etc. You cannot do that on Imap and have to mess with the online version of the email in order to set up the rules etc. Not easy if you have emails with different companies all with different interfaces and of course all subject to change on the whim of the provider. If pop3 is there it fine. I usually use imap as well if provided and hide the folders except thus used by default, ie spam and inbox then if one ends up in spam if I copy it to inbox then it gets delivered on pop3.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Robert Kingett" <kingettr@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 04, 2019 1:24 PM
Subject: Re: [nvda] OE Classic 2.9 released


Did you not see the accessibility updates in the previous releases notes? regardless, this version is far more accessible, but absolutely no IMAP support. I personally don't understand why people use POP anyway, but anyway... Below is their help page on identities.

https://www.oeclassic.com/online-help-identities


Re: NVDA and sound card

Felix G.
 

Hi,
failing all else, of course you can reset NVDA to factory settings by pressing NVDA+CTRL+R three times quickly. You'll lose all settings, but you very likely get your speech back, even though it might not be the synth you are expecting.
On a Windows 10 machine you can even launch Narrator while NVDA is running, then change settings in NVDA under the guidance of Narrator. Got me out of a tight spot once.
Best,
Felix

Am Fr., 5. Apr. 2019 um 05:31 Uhr schrieb hurrikennyandopo ... <hurrikennyandopo@...>:

Hi


I guess you could try the folowing when nvda is running even with no sound.


Press the nvda key + ctrl key + the letter S


this will bring up the synth settings in nvda.


When it comes up press the letter E for the e speak synth just in case it is set to no speech.

Tab again and press the letter M so it lands on microsoft sound mapper it is like the default on most systems.

Then tab 2 times to the ok button then press the enter key.


your sound should come backthen go back in when you have sound and change it to the synth package you want and the sound card.


Hope that helps.


Gene nz


On 5/04/2019 2:08 PM, Kerryn Gunness via Groups.Io wrote:
hi group
 
does NVDA have features to work with sound cards?
i mean, if i use NVDA with an external sound card and after removing the sound card, NVDA  went mute
how do you fix this, i mean how to set back NVDA  on your default sound card?
 
thanks
--
Image NVDA
        certified expert
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: NVDA and Skype for business

Bianka Brankovic <bianka.brankovic@...>
 

Hello Schoepp,

interesting, we are using Skype for Business 2015 and chat conversations and calls are accessible.

Our IT departement might have configured it differently than yours though.

Could you maybe describe a bit how Skype for Business looks for you?

Thanks and kind regards,

Bianka


Re: Weather Plus 5.0 update available

Adriano Barbieri
 


Hi,

You didn't specify the exact version, I had made an update after the 5.0 with Apixu: Version: 5.0 - 18.03.2019

If the date of your version is older try to see if the latest version is available:

nvda menu,  preferences submenu, weather plus settings submenu, check for upgrade...

otherwise download directly: http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

Let them know


Regards

Adrianio


Il 05/04/2019 01:24, Inam Uddin via Groups.Io ha scritto:

Dear friends, here is the log after trying weather addon and it is not working.

 

INFO - __main__ (04:20:42.190):

Starting NVDA

INFO - core.main (04:20:42.538):

Config dir: C:\Users\inam0\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (04:20:42.538):

Loading config: C:\Users\inam0\AppData\Roaming\nvda\nvda.ini

INFO - core.main (04:20:42.622):

NVDA version 2019.1

INFO - core.main (04:20:42.622):

Using Windows version 10.0.17763 workstation

INFO - core.main (04:20:42.622):

Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]

INFO - core.main (04:20:42.622):

Using comtypes version 1.1.3

INFO - core.main (04:20:42.622):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDrivers.espeak.SynthDriver.__init__ (04:20:43.000):

Using eSpeak NG version 1.49.3 dev

INFO - synthDriverHandler.setSynth (04:20:43.085):

Loaded synthDriver espeak

INFO - core.main (04:20:43.085):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5

INFO - brailleInput.initialize (04:20:43.085):

Braille input initialized

INFO - braille.initialize (04:20:43.089):

Using liblouis version 3.8.0

INFO - braille.BrailleHandler.setDisplayByName (04:20:43.089):

Loaded braille display driver noBraille, current display has 0 cells.

WARNING - core.main (04:20:43.119):

Java Access Bridge not available

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (04:20:43.130):

UIAutomation: IUIAutomation6

WARNING - globalPlugins.MathMlReader (04:20:45.456):

MathPlayer 4 not available

WARNING - globalPlugins.MathMlReader.__init__ (04:20:45.466):

MathPlayer 4 not available

INFO - core.main (04:20:45.473):

NVDA initialized

ERROR - unhandled exception (04:22:04.048):

Traceback (most recent call last):

  File "C:\Users\inam0\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\weather plus\__init__.py", line 163, in onSettingsDialog

AttributeError: 'GlobalPlugin' object has no attribute 'api_key'

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Gene
Sent: Thursday, April 4, 2019 12:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

This list, as most, doesn't allow attachments because of the malware risk..  also, you don't explain anything about why anyone would want the attachment.  If you want to make something available, you can send a link to it on a service like Drop Box.

 

Gene

----- Original Message -----

 

Sent: Wednesday, April 03, 2019 1:32 PM

Subject: Re: [nvda] Weather Plus 5.0 update available

 

 

                Dear friend, please find attachment!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Adriano Barbieri via Groups.Io
Sent: Wednesday, April 3, 2019 3:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

Hi,

Just out of curiosity, you can send the log, even if this version that uses Apixu has momentarily abandoned.

Thanks

 

Regards

adriano

 

You can wait for the new version 6.0 that will return to using the Yahoo weather API.

 

Il 03/04/2019 06:09, Inam Uddin via Groups.Io ha scritto:

Dear friends, according to the instructions, I’m going to weather setting sub menue and pressing enter on set city but it is not working it is giving me the sound and returning to me to the desktop!

What am I doing wrong?

Please help me in this regards as soon as possible!

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

From: Kwork
Sent: Thursday, March 14, 2019 5:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather Plus 5.0 update available

 

With the Weather Plus add-on installed, go to the NVDA menu, preferences

submenu, then arrow down to weather plus settings.

 

Expand that, then down arrow to documentation and press enter. Then open

the file entitled Weather Plus First Settings.html and follow the

directions.

 

Travis

 

On 3/13/2019 5:25 PM, Curtis Delzer wrote:

> where do I find such a key?

> On 3/13/2019 4:10 PM, Don H wrote:

>> Have to make sure that the key you put in does not have any empty

>> spaces at the end of it.

>> 

>> On 3/13/2019 5:49 PM, Curtis Delzer wrote:

>>> I put in my zip code in that "combo box," and there was no "OK" button.

>>> 

>>> On 3/13/2019 12:18 PM, Ron Canazzi wrote:

>>>> An easier way is to open the Weather Plus settings and choose

>>>> documentation. It takes you to the folder where 5 files including

>>>> read me first are located.

>>>> 

>>>> 

>>>> On 3/13/2019 6:30 AM, Hermann-Josef Kurzen wrote:

>>>>> Hi Gary,

>>>>> 

>>>>> unfortunately Adriano didn't tell where to find the file "weather

>>>>> first settings.html".

>>>>> I've found it under:

>>>>> j:\AppData\Roaming\nvda\addons\Weather Plus\doc

>>>>> where j:\ is my users directory. The right folder for You is "en"

>>>>> And in this folder there is the file "weather plus first

>>>>> settings.html".

>>>>> 

>>>>> 

>>>>> Greetings - Hermann

>>>>> 

>>>>> 

>>>>> 

>>>>> --- Ursprüngliche Nachricht ---

>>>>>> Von:         "Gary Metzler" <gmtravel@...>  Wichtigkeit

>>>>>> Normal

>>>>>> Lesebestätigung wurde nicht angefordert

>>>>>> Gesendet am: Mi, 13. März 2019 05:36:04 -0400

>>>>>> An:          nvda@nvda.groups.io;

>>>>>> CC:

>>>>>> Betreff:     Re: [nvda] Weather Plus 5.0 update available

>>>>>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>>>>>> 

>>>>>> Hi Adriano,

>>>>>> 

>>>>>> I can't seem to find the read me 1st file.  Also, how do I get a

>>>>>> key?  Thanks for any help.

>>>>>> 

>>>>>> -----Original Message-----

>>>>>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of

>>>>>> Adriano Barbieri via Groups.Io

>>>>>> Sent: Wednesday, March 13, 2019 3:07 AM

>>>>>> To: nvda-addons@nvda-addons.groups.io; nvda <nvda@nvda.groups.io>

>>>>>> Subject: [nvda] Weather Plus 5.0 update available

>>>>>> 

>>>>>> Hi to every one,

>>>>>> 

>>>>>> After more than 2 months it is back in operative :)

>>>>>> 

>>>>>> Changes in this new version:

>>>>>> 

>>>>>> . Weather Plus now uses the APIXU API, in my opinion better than

>>>>>> the previous one; To work requires an API key, read the Weather

>>>>>> Plus First Settings.html for instructions (highly recommended).

>>>>>> #Changes in the Weather Plus Settings window:

>>>>>> . Removed old checkbox "State of barometric pressure".

>>>>>> . Replaced with new checkbox "Add cloudiness value"; It gives you

>>>>>> the percentage of cloudiness.

>>>>>> . Added new checkbox "Add precipitation value"; It gives you the

>>>>>> amount in millimeters or inches of precipitation.

>>>>>> . Removed old checkbox "Indicates the wait with a beep while you

>>>>>> search for the latest bulletin"; Left active by default.

>>>>>> . Added to the Astronomic informations;

>>>>>> Time of moonrise and moonset.

>>>>>> . Added new button "Rename";

>>>>>> To rename cities more conveniently.

>>>>>> . Improved function of the "Test" button; Now accept some

>>>>>> commands to facilitate the search for cities; These new commands

>>>>>> are described in the help function that can be called up with F1.

>>>>>> . Added button to manage your API key.

>>>>>> 

>>>>>> Weather Plus can update itself, however you can download it

>>>>>> directly from:

>>>>>> 

>>>>>> . http://www.nvda.it/files/plugin/weather_plus5.0.nvda-addon

>>>>>> 

>>>>>> or from the pages:

>>>>>> 

>>>>>> . http://www.nvda.it/weather-plus#main-content

>>>>>> 

>>>>>> . https://addons.nvda-project.org/addons/weatherPlus.en.html

>>>>>> 

>>>>>> If the file extension arrives as .zip,please correct it with

>>>>>> .nvda-addon.

>>>>>> 

>>>>>> 

>>>>>> Cheers

>>>>>> 

>>>>>> adriano

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>>> 

>>>>> 

>>>>> 

>>>>> 

>>>>> 

>> 

>> 

>> 

>>