Date   

Re: Greetings and introduction

Quentin Christensen
 

Dear Jarek,

Welcome!  You will find lots of conversations about NVDA here.  Feel free to also share your questions, comments and advice.

I write the official NVDA training material available from NV Access: https://www.nvaccess.org/shop/

I regularly post here, and every couple of weeks I write up a blog post on what NV Access is up to, called In-Process: https://www.nvaccess.org/category/in-process/

Another way to join in is coming up later this year with the annual "NVDACon", an online conference for all things NVDA.  You can find more information about it here: https://www.nvdacon.org/  and in particular, the organisers are currently gathering feedback on the preferred weekend to run the conference.  You can share your thoughts on that here: https://doodle.com/poll/sd5ubgyrbhibm5bw

Kind regards

Quentin.

On Mon, May 6, 2019 at 6:56 AM Jarek.Krcmar <Jarek.Krcmar@...> wrote:
Hello,

My just logged in to conference Nvda.

My name is Jarek Krcmar from the Czech Republic.

I would like to read a messages about Nvda.

Sincerely:

Jarek






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: key assignments in NVDA

Quentin Christensen
 

There isn't a single keypress way, but you can use the "input gestures" to change the behaviour of the keystrokes.  What you would need to do is "remove" each one of the conflicting desktop keystrokes.  Ideally if you do it from desktop layout, you could remove then add the same keystroke back but set it for desktop layout only - then go back to laptop keyboard layout once you are done (if you simply remove them, if you ever go to desktop layout, you won't have any object navigation keys).

You can find "Input Gestures" on NVDA's preferences menu (NVDA+n, then P, then select "Input Gestures").

Regards

Quentin.

On Fri, May 3, 2019 at 10:12 PM <mhysnm1964@...> wrote:

All,

 

Is it possible to remap keys in NVDA? As I am using a laptop with a numerical keypad. I am also using the NVDA laptop layout. I want the number pad to be used as normal cursor keys, page up and page down, ETC. But NVDA is overriding this behaviour and forces the use of Object Nav. Any ideas on how to get around this? As the laptop keyboard to jump to home, end, delete is at the top of the keyboard which is quite a pain. FN left/right arrow key does not change to home and end.

 

 

 

I wish NVDA had the option to switch between use of Object Nav (default behaviour) and a normal keypad.



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


is this document out of date?

Troy Burnham
 

Hi all,


I have a document titled basic training for NVDA.docx. I can't tell when it was written but it's in a folder with stuff from 2017, if that's when it was written is it still applicable for the current version of NVDA?


Thanks.


Troy


thanks for fixing outlook

lauracornwell <lauracornwell1@...>
 

Hey thereto all on this mailing list ,I don’t post much on hear at all , but I would just like to say a big thanks to everyone who has worked on the stuff with outlook, this has   been a big help to me and so many ,more people  keep up[ the great work .everyone .


Re: Python ide

Kerryn Gunness <k_gunness@...>
 

my apologies for posting

----- Original Message -----
From: "Carlos" <gmjc341961@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 9:29 AM
Subject: Re: [nvda] Python ide


Hello:

You should not have posted that link here!

That website is FULL! of pirated and reversed engineered software!!!

"Please!" Don't post links to these kinds of websites!

It's very bad for NVDA mailing list to be associated with these kinds of websites!


On 5/5/2019 6:10 AM, Kerryn Gunness via Groups.Io wrote:
hi felix
below is the direct link to bhp's website

https://blindhelp.net/

this website contains software, training material ETC, used by blind or v i persons, also created by blind or v i persons

its a great resource

you can get notepad ++ here

kerryn
----- Original Message ----- From: "Felix G." <constantlyvariable@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 5:04 AM
Subject: Re: [nvda] Python ide


Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness@...>:

i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web interface so just press E to jump to the edit area, then press spacebar to enter it then write code. Press esc to exit it and down arrow to find the output area.
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@...> wrote:

Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search for accessibility at the search box, and find and press spacebar to turn on this feature. I'm busy now, and I just did it for once so may be I didn't remember the correct steps to setup. Tell me and the list if you have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three days but couldn't setup visual studio code for python. If it is needed you may send me mail at fahim.net.2014@...


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@...> wrote:

Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the Python vis mailling list, a blind community of learnign Python. Take a look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?



--
Windows 10 Home, 64-Bit, Version 1809, Build 17763
NVDA Version 2019.1.1



Re: What is the threshold snap shot used for?

hurrikennyandopo ...
 

Hi


Ok that makes sense I heard there was chatter we are changing over before long to use it and things like add ons etc will need to be updated as well to work with it.

is it that we are starting to change from the next release of NVDA?


I would also have to go back and check on the same page it said there was a beta release of NVDA last week. yet when you download it it mentions nvda 2019.1 and not nvda 2019.2 as you would expect in a beta release. I would have to go back and check also it referenced what was new in 2019.1 and not in 2019.2 coming up.

It is for may 2nd 2019 maybe the wrong snap shot went up there?


Gene nz


On 6/05/2019 7:54 AM, Adriani Botez wrote:

This will be for python 3 branch.

 

Von: nvda@nvda.groups.io <nvda@nvda.groups.io> Im Auftrag von hurrikennyandopo ...
Gesendet: Sonntag, 5. Mai 2019 21:54
An: nvda@nvda.groups.io
Betreff: [nvda] What is the threshold snap shot used for?

 

Hi guys

 

I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?

 

There is no information to say what it does like the others.

 

The link to the page is https://www.nvaccess.org/files/nvda/snapshots/

 

Gene nz

 

--

Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Greetings and introduction

Jarek.Krcmar
 

Hello,

My just logged in to conference Nvda.

My name is Jarek Krcmar from the Czech Republic.

I would like to read a messages about Nvda.

Sincerely:

Jarek


Re: What is the threshold snap shot used for?

Adriani Botez
 

This will be for python 3 branch.

 

Von: nvda@nvda.groups.io <nvda@nvda.groups.io> Im Auftrag von hurrikennyandopo ...
Gesendet: Sonntag, 5. Mai 2019 21:54
An: nvda@nvda.groups.io
Betreff: [nvda] What is the threshold snap shot used for?

 

Hi guys

 

I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?

 

There is no information to say what it does like the others.

 

The link to the page is https://www.nvaccess.org/files/nvda/snapshots/

 

Gene nz

 

--

Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.



What is the threshold snap shot used for?

hurrikennyandopo ...
 

Hi guys


I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?


There is no information to say what it does like the others.


The link to the page is https://www.nvaccess.org/files/nvda/snapshots/


Gene nz


--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: changing what NVDA says when a punctuation mark is typed

Troy Burnham
 

I managed to get tick changed to apostrophe, I forgot about the other times I might want to hear dot instead of period so I've decided to leave that as is for now.


Troy

On 5/5/2019 4:11 AM, Brian's Mail list account via Groups.Io wrote:
What would be really good would be a short routine that means people could share customised versions. Obviously theirs would depend on localisation. I've successfully done it manually on my own machines but an error and all sorts of oddities can occur when you reboot nvda. Ahem.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Andre Fisher" <andrefisher729@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, May 04, 2019 11:15 PM
Subject: Re: [nvda] changing what NVDA says when a punctuation mark is typed


Hi.

In the symbols pronunciation dialog, there are two entries for both these symbols, as there are two cases where both are usually used. The long and short of it is, you'd need to change them both, but I'm not sure if this may have undesired results. Change them and let us know.






cannot remove speaking of row headings in excel

Cearbhall O'Meadhra
 

Quentin,

I have pressed NVDA + control + r to set a particular column as the row headings for each row in my excel spread sheet. Each row is separated by a blank row but yet NVDA set all of the cells in that column as the heading for their respective row. This was fine when I needed to hear what row I was on.
Now, I wish to turn off speaking of the rows and find that NVDA will only allow me to turn off speaking the cells one at a time. There are 5,650 rows involved! I don't think I should have to do each cell in turn, should I?

How can I now get rid of the spoken row headings for the entire column?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kerryn Gunness via Groups.Io
Sent: Sunday, May 5, 2019 2:10 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Python ide

hi felix
below is the direct link to bhp's website

https://blindhelp.net/

this website contains software, training material ETC, used by blind or v i persons, also created by blind or v i persons

its a great resource

you can get notepad ++ here

kerryn
----- Original Message -----
From: "Felix G." <constantlyvariable@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 5:04 AM
Subject: Re: [nvda] Python ide


Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness@...>:

i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web
interface so just press E to jump to the edit area, then press spacebar to
enter it then write code. Press esc to exit it and down arrow to find the
output area.
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to
see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@...>
wrote:

Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search
for accessibility at the search box, and find and press spacebar to turn
on this feature. I'm busy now, and I just did it for once so may be I
didn't remember the correct steps to setup. Tell me and the list if you
have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three
days but couldn't setup visual studio code for python. If it is needed
you may send me mail at fahim.net.2014@...


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@...>
wrote:

Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the
Python vis mailling list, a blind community of learnign Python. Take a
look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?


Re: Python ide

Carlos
 

Hello:

    You should not have posted that link here!

    That website is FULL! of pirated and reversed engineered software!!!

    "Please!" Don't post links to these kinds of websites!

    It's very bad for NVDA mailing list to be associated with these kinds of websites!

On 5/5/2019 6:10 AM, Kerryn Gunness via Groups.Io wrote:
hi felix
below is the direct link to bhp's website

https://blindhelp.net/

this website contains software, training material ETC, used by blind or v i persons, also created by blind or v i persons

its a great resource

you can get notepad ++ here

kerryn
----- Original Message ----- From: "Felix G." <constantlyvariable@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 5:04 AM
Subject: Re: [nvda] Python ide


Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness@...>:

i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web interface so just press E to jump to the edit area, then press spacebar to enter it then write code. Press esc to exit it and down arrow to find the output area.
Cuong
----------------
Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: info@...; tech@...
 Facebook: https://www.facebook.com/saomaicenterfortheblind
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@...; cuong@...
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@...> wrote:

Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search for accessibility at the search box, and find and press spacebar to turn on this feature. I'm busy now, and I just did it for once so may be I didn't remember the correct steps to setup. Tell me and the list if you have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: info@...; tech@...
 Facebook: https://www.facebook.com/saomaicenterfortheblind
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@...; cuong@...
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three days but couldn't setup visual studio code for python. If it is needed you may send me mail at fahim.net.2014@...


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@...> wrote:

Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the Python vis mailling list, a blind community of learnign Python. Take a look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: info@...; tech@...
 Facebook: https://www.facebook.com/saomaicenterfortheblind
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@...; cuong@...
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?



--
Windows 10 Home, 64-Bit, Version 1809, Build 17763
NVDA Version 2019.1.1


Re: Python ide

Kerryn Gunness <k_gunness@...>
 

hi felix
below is the direct link to bhp's website

https://blindhelp.net/

this website contains software, training material ETC, used by blind or v i persons, also created by blind or v i persons

its a great resource

you can get notepad ++ here

kerryn

----- Original Message -----
From: "Felix G." <constantlyvariable@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 5:04 AM
Subject: Re: [nvda] Python ide


Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness@...>:

i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web interface so just press E to jump to the edit area, then press spacebar to enter it then write code. Press esc to exit it and down arrow to find the output area.
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@...> wrote:

Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search for accessibility at the search box, and find and press spacebar to turn on this feature. I'm busy now, and I just did it for once so may be I didn't remember the correct steps to setup. Tell me and the list if you have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three days but couldn't setup visual studio code for python. If it is needed you may send me mail at fahim.net.2014@...


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@...> wrote:

Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the Python vis mailling list, a blind community of learnign Python. Take a look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@...; tech@...
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@...; cuong@...
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?


locked Re: NVDA accessible ITunes alternative

Nimer Jaber
 

Indeed. This topic will now be locked. While the OP had a valid question, the next three messages on the topic have not been on topic. In addition, if you have problems with a specific thread, please flag it or send an email to the owner address instead of sending a message commenting on an OT post with your own OT post.

thanks.


locked Re: NVDA accessible ITunes alternative

Shaun Oliver
 

what's any of this to do with NVDA?

On 5/05/2019 19:34, Shaun Everiss wrote:
Well, for ages I dreamed about owning an iphone.

I was about to become part of the collective, but the prices are high, with itunes only being a music transfer app and podcast downloader and places to buy subscriptions and music/book content as well as updates its suddenly not worth it.

Then there is this face id crap, especially since the health of my eyes are not doing well, its almost impossible to use normal security and photo recognition systems allready.

And once my eyes get ripped out I won't be able to use any of those systems anyway.

Then there is this stupid apple music format which will not play on anything bar apple.

Then there is this icloud business.

Icloud is not as accessible as it once was, its usable but naah not going there.

Now that doesn't mean I won't become one with the borg its just I won't use it as a communication interface.

At least not the apple cube.

I am allready so heavily into the google section off the borg I am getting  an android device, yes, with all the security issues, and stuff that goes with it but I get storage options for external storage and can do whatever I want.

I know talkback exists on the devices I know there are accessible things like mobile access suite and or synaptic if I really get a need to customise things, I obviously want to have access to all my simple stuff but as I adapt to it I want more access to everything else.

One thing that is even pushing me to get assimilated is simply because there are a lot more apps to test than standard windows ones, its clear I need to switch my game up to get into the next level of the cyberverse.

On the other side as long as they exist I can for ever more get and upgrade talks on my devices, then again, I will always need a 32 bit system to update and or use them so well there you go.

I could use an old apple device but to be honest, samsung or even nokia seem to be the push for a lot, I want pure droid to be honest, google devices don't use external storage sadly though.

But google devices do use usb c which does mean I guess I could run a hub off it with usbc ssd drives on and you can buy some now.



On 5/05/2019 9:16 PM, Brian's Mail list account via Groups.Io wrote:
I'll add my voice to this also. Itunes is becoming more like some kind of creature which has begun to breed uncontrollably!
Now which option does this or that, oh you want my  Iphone  log in yet a 26th time, really?
bah humbug.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Mr. Wong Chi Wai, William" <cwwong.pro@...>
To: "NVDA Groups.io mailing list email" <nvda@nvda.groups.io>
Sent: Sunday, May 05, 2019 2:54 AM
Subject: [nvda] NVDA accessible ITunes alternative


Hi,
Anyone of you know any third party ITunes-like IOS management software, e.g. ITools, Iphone box, syncios, etc, that is accessible using NVDA?
Thanks.








locked Re: NVDA accessible ITunes alternative

 

Well, for ages I dreamed about owning an iphone.

I was about to become part of the collective, but the prices are high, with itunes only being a music transfer app and podcast downloader and places to buy subscriptions and music/book content as well as updates its suddenly not worth it.

Then there is this face id crap, especially since the health of my eyes are not doing well, its almost impossible to use normal security and photo recognition systems allready.

And once my eyes get ripped out I won't be able to use any of those systems anyway.

Then there is this stupid apple music format which will not play on anything bar apple.

Then there is this icloud business.

Icloud is not as accessible as it once was, its usable but naah not going there.

Now that doesn't mean I won't become one with the borg its just I won't use it as a communication interface.

At least not the apple cube.

I am allready so heavily into the google section off the borg I am getting  an android device, yes, with all the security issues, and stuff that goes with it but I get storage options for external storage and can do whatever I want.

I know talkback exists on the devices I know there are accessible things like mobile access suite and or synaptic if I really get a need to customise things, I obviously want to have access to all my simple stuff but as I adapt to it I want more access to everything else.

One thing that is even pushing me to get assimilated is simply because there are a lot more apps to test than standard windows ones, its clear I need to switch my game up to get into the next level of the cyberverse.

On the other side as long as they exist I can for ever more get and upgrade talks on my devices, then again, I will always need a 32 bit system to update and or use them so well there you go.

I could use an old apple device but to be honest, samsung or even nokia seem to be the push for a lot, I want pure droid to be honest, google devices don't use external storage sadly though.

But google devices do use usb c which does mean I guess I could run a hub off it with usbc ssd drives on and you can buy some now.

On 5/05/2019 9:16 PM, Brian's Mail list account via Groups.Io wrote:
I'll add my voice to this also. Itunes is becoming more like some kind of creature which has begun to breed uncontrollably!
Now which option does this or that, oh you want my  Iphone  log in yet a 26th time, really?
bah humbug.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Mr. Wong Chi Wai, William" <cwwong.pro@...>
To: "NVDA Groups.io mailing list email" <nvda@nvda.groups.io>
Sent: Sunday, May 05, 2019 2:54 AM
Subject: [nvda] NVDA accessible ITunes alternative


Hi,
Anyone of you know any third party ITunes-like IOS management software, e.g. ITools, Iphone box, syncios, etc, that is accessible using NVDA?
Thanks.







Re: continuous reading command in word document

Brian's Mail list account
 

Of course in some editors like Open or Libra Office and with a couple of synths there are issues that make it stop prematurely, neither seems to be able to be gotten round by nvda as yet.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Felix G." <constantlyvariable@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 05, 2019 8:51 AM
Subject: Re: [nvda] continuous reading command in word document


Hello,
in Word, as in any other editable text context, this command is
NVDA+down-arrow for desktop layout, and NVDA+a for laptop layout.
All the best,
Felix Grützmacher

Am So., 5. Mai 2019 um 09:24 Uhr schrieb pankaj singh Kushwaha
<pankaj.jnu11@...>:

Dear list members, as my subject line states, I want to know the
continuous reading command in word document. Please furnish
thisinformations.

--
Pankaj Singh Kushwaha
Ph.D. Research Scholar,
Centre for European Studies,
School of International Studies, "SIS" J.N.u. New Dehli 110067.
Mobile: +919868610216
E.Mail: pankaj.jnu11@...
Facebook: I.D.: Pankaj.jnu11@...
Institutional mail: pankaj44_isl@...



locked Re: NVDA accessible ITunes alternative

Brian's Mail list account
 

I'll add my voice to this also. Itunes is becoming more like some kind of creature which has begun to breed uncontrollably!
Now which option does this or that, oh you want my Iphone log in yet a 26th time, really?
bah humbug.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Mr. Wong Chi Wai, William" <cwwong.pro@...>
To: "NVDA Groups.io mailing list email" <nvda@nvda.groups.io>
Sent: Sunday, May 05, 2019 2:54 AM
Subject: [nvda] NVDA accessible ITunes alternative


Hi,
Anyone of you know any third party ITunes-like IOS management software, e.g. ITools, Iphone box, syncios, etc, that is accessible using NVDA?
Thanks.




Re: changing what NVDA says when a punctuation mark is typed

Brian's Mail list account
 

What would be really good would be a short routine that means people could share customised versions. Obviously theirs would depend on localisation. I've successfully done it manually on my own machines but an error and all sorts of oddities can occur when you reboot nvda. Ahem.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Andre Fisher" <andrefisher729@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, May 04, 2019 11:15 PM
Subject: Re: [nvda] changing what NVDA says when a punctuation mark is typed


Hi.

In the symbols pronunciation dialog, there are two entries for both these symbols, as there are two cases where both are usually used. The long and short of it is, you'd need to change them both, but I'm not sure if this may have undesired results. Change them and let us know.


Re: Python ide

 

I really don't think it's a good idea to talk about BHP here. Others know why I'm saying this, that's for sure.
Now I'll just say this is a website. A quite good website if you ask me.
But well as I said before, this isn't a good idea to talk about it here.

Cheers,
Marcio AKA Starboy

Sent from a galaxy far, far away.


Em 05/05/2019 06:04, Felix G. disse:

Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness@...>:
i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web interface so just press E to jump to the edit area, then press spacebar to enter it then write code. Press esc to exit it and down arrow to find the output area.
Cuong
----------------
Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: info@...; tech@...
 Facebook: https://www.facebook.com/saomaicenterfortheblind
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@...; cuong@...
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@...> wrote:
Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search for accessibility at the search box, and find and press spacebar to turn on this feature. I'm busy now, and I just did it for once so may be I didn't remember the correct steps to setup. Tell me and the list if you have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: info@...; tech@...
 Facebook: https://www.facebook.com/saomaicenterfortheblind
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@...; cuong@...
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three days but couldn't setup visual studio code for python. If it is needed you may send me mail at fahim.net.2014@...


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@...> wrote:
Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the Python vis mailling list, a blind community of learnign Python. Take a look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: info@...; tech@...
 Facebook: https://www.facebook.com/saomaicenterfortheblind
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@...; cuong@...
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?





39681 - 39700 of 100970