nvda@nvda.groups.io

Re: key assignments in NVDA

Luke Davis

#61530

Personally, I thought the whole point of laptop layout, was that it assumed you had no number pad or conventional six pack.  Else why the differentiation between laptop and desktop?  That is the primary difference between keyboard types--the lack of a number pad.  I always either buy large laptops with number pads, or I use external keyboards on my smaller laptops without them, so have never learned or much used laptop layout.

So I'm saying I had always assumed (wrongly, it seems) that laptop layout would act as if you had no numpad as far as the screen reader was concerned, which would leave any numpad you do have to function as it would by default.
That seems the most logical arrangement to me.

Luke

Show quoted text

On Tue, 7 May 2019, Quentin Christensen wrote:

I have seen this issue come up before.  I'm going to catch up with Mick and will raise it this afternoon.  In the meantime, clearly there are users who have
NVDA setup in Laptop keyboard layout and want to use the number pad for navigation.  Are there any users who have NVDA in Laptop keyboard layout and like
being able to use object navigation from the number pad as well?
Just thinking that if there are people who use laptop layout and number pad object navigation, your third hybrid keyboard layout could be a solution - but
if not, maybe setting the "desktop" object navigation keys to be desktop (only) keys would be a better solution.
Quentin.
On Mon, May 6, 2019 at 8:13 PM Andre Fisher <andrefisher729@gmail.com> wrote:
      Hi Quentin,

      As this issue has been brought up on a few occasions before, I've been thinking of an easier solution that may help persons that have the same
      desire. What I was thinking was that there could be a new keyboard layout that could accomodate this behaviour, or that the laptop layout by
      default would behave like this. Then, there could be a different layout called hybrid or something like that, with laptop keystrokes and the
      NUMPAD using object navigation keys.
--
Quentin Christensen
Training and Support Manager
Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/
www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

Re: NVDA and issue with Zoom

Robert Kingett

#61529

I reported it to zoom's accessibility team, but I still think you should report it also because, yes, I can duplicate it.

Re: outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

Gene

#61528

I don't know what is causing the problem if using object navigation doesn't solve it. I don't think it will help but you can try maximizing or restoring the window, whatever is opposite to what it is now.

Gene

----- Original Message -----

Show quoted text

From: J.G

Sent: Wednesday, May 08, 2019 1:42 PM

To: nvda@nvda.groups.io

Subject: Re: [nvda] outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

Hello,

excuse me for not being clear enough.

I checked object navigation and screen review and she has nvda set on object navigation (object review). also tried with changing a review with same results.

This sentence is my reply to your suggestions.

due to I cannot find button for attachments on a web interface of this group I am post in a log here in message body. hope, it will help.

And here I wrote, why a log is pasted in a message body. It is not related to the problem, it is only a commentary, because someone was writing months ago about pasting and/or attaching nvda logs.

hope, that I'm clearer now.

Again, log represents, what happens, when arrow key is pressed in message list and shows an unspecified error.

thanks for your effort to help me.

regards, Jožef

Re: Changing List Posting Address #adminnotice

Marcio

#61527

Currently, what happens if we send the messages to nvda@groups.io?
Hmmm going to test it.
If nvda@groups.io is a valid address I don't think it's necessary to change because nvda@groups.io is easier to type than main@nvda.groups.io.
Let's see if it's sent. If it is, then the address is working.

Cheers,
Marcio AKA Starboy

Sent from a galaxy far, far away.

--
Are you a Thunderbird user? Then join the Thunderbird mailing list to help and be helped with all Thunderbird things - questions, features, add-ons and much more!

Em 08/05/2019 15:15, David Moore disse:

Show quoted text

Hi
I agree with what you want to do regarding changing the address to main@nvda.groups.io I like that idea of having nvda appear once in the address. You have my vote on that! Take care Neimer! David Moore

On Wed, May 8, 2019, 1:38 PM Nimer Jaber <nimerjaber1@... wrote:

hello everyone,

I am considering a change to the posting address to this list. I would like to change the posting address from what it is now, nvda@nvda.groups.io to main@nvda.groups.io. I would like to do this because we have a chat list, and this is the main group. I also want to do this because it means that new users don't have to type nvda twice to reach the list. thoughts on this can be sent to the owner email address at nvda+owner@nvda.groups.io

thanks.

--

Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!

Re: outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

J.G

#61526

Hello,

excuse me for not being clear enough.

I checked object navigation and screen review and she has nvda set on object navigation (object review). also tried with changing a review with same results.

This sentence is my reply to your suggestions.

due to I cannot find button for attachments on a web interface of this group I am post in a log here in message body. hope, it will help.

And here I wrote, why a log is pasted in a message body. It is not related to the problem, it is only a commentary, because someone was writing months ago about pasting and/or attaching nvda logs.

hope, that I'm clearer now.

Again, log represents, what happens, when arrow key is pressed in message list and shows an unspecified error.

thanks for your effort to help me.

regards, Jožef

Can I use NVDA portable to install Windows 7 from scratch?

James Bentley <bentleyj1952@...>

#61525

Greetings to all,
 
I wonder if I can use NVDA that is on a bootable Windows PE to install 
Windows 7?
 
If not, can I do this with the Narrator that comes with Windows 7?  If 
so, what keystrokes start up Narrator in 7?
 
Any and all suggestions and steps will be greatly appreciated.
 
Regards,
 
James B

Re: Changing List Posting Address #adminnotice

David Moore

#61524

Hi
I agree with what you want to do regarding changing the address to main@nvda.groups.io I like that idea of having nvda appear once in the address. You have my vote on that! Take care Neimer! David Moore

Show quoted text

On Wed, May 8, 2019, 1:38 PM Nimer Jaber <nimerjaber1@... wrote:

hello everyone,

I am considering a change to the posting address to this list. I would like to change the posting address from what it is now, nvda@nvda.groups.io to main@nvda.groups.io. I would like to do this because we have a chat list, and this is the main group. I also want to do this because it means that new users don't have to type nvda twice to reach the list. thoughts on this can be sent to the owner email address at nvda+owner@nvda.groups.io

thanks.

--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!

Changing List Posting Address #adminnotice

Nimer Jaber

#61523

hello everyone,

I am considering a change to the posting address to this list. I would like to change the posting address from what it is now, nvda@nvda.groups.io to main@nvda.groups.io. I would like to do this because we have a chat list, and this is the main group. I also want to do this because it means that new users don't have to type nvda twice to reach the list. thoughts on this can be sent to the owner email address at nvda+owner@nvda.groups.io

thanks.

--

Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!

Re: outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

Gene

#61522

Also, it isn't clear what you are asking. Your subject line talks about Outlook and your message says there is no attachments button in the web interface for this list. I addressed the Web Interface question. If you are asking how to find the attachments button in Outlook, it may be that there has to be an attachment. Send the person a message with an attachment, then look for the button.

Gene

Show quoted text

----- Original Message -----

From: J.G

Sent: Wednesday, May 08, 2019 11:49 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

Hello,

I checked objectnavigation and screen review and she has nvda set on object navigation (object review). also tried with changing a review with same results. due I cannot find button for attachments on a web interfaceof this group I am postin a log here in message body. hope, it will help.

----- beginning of log -----

INFO - __main__ (14:09:55.174):
Starting NVDA
INFO - core.main (14:09:55.471):
Config dir: C:\Users\Uporabnik\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (14:09:55.471):
Loading config: C:\Users\Uporabnik\AppData\Roaming\nvda\nvda.ini
INFO - config.ConfigManager._loadConfig (14:09:55.503):
Config loaded (after upgrade, and in the state it will be used by NVDA):
{u'schemaVersion': u'2', u'development': {u'enableScratchpadDir': u'False'}, u'upgrade': {}, u'update': {u'allowUsageStats': u'True', u'askedAllowUsageStats': u'True', u'autoCheck': u'True', u'startupNotification': u'True'}, u'general': {u'showWelcomeDialogAtStartup': u'False', u'language': u'Windows', u'saveConfigurationOnExit': u'True', u'askToExit': u'True', u'playStartAndExitSounds': u'True', u'loggingLevel': u'DEBUG'}, u'speech': {u'synth': u'sapi5', u'outputDevice': u'Microsoft Sound Mapper', u'oneCore': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech_OneCore\\Voices\\Tokens\\MSTTS_V110_slSI_Lado', u'volume': u'100'}, u'sapi5': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech\\Voices\\Tokens\\eBraRenato', u'volume': u'100'}}, u'braille': {u'noBraille': {u'port': u''}}, u'keyboard': {u'speakCommandKeys': u'False', u'speakTypedWords': u'True'}, u'presentation': {u'reportTooltips': u'True', u'guessObjectPositionInformationWhenUnavailable': u'True'}, u'uwpOcr': {u'language': u'sl'}, u'documentFormatting': {u'autoLanguageSwitching': u'True'}}
DEBUG - core.main (14:09:55.706):
setting language to Windows
INFO - core.main (14:09:55.759):
NVDA version 2019.1.1
INFO - core.main (14:09:55.759):
Using Windows version 10.0.17134 workstation
INFO - core.main (14:09:55.759):
Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]
INFO - core.main (14:09:55.759):
Using comtypes version 1.1.3
INFO - core.main (14:09:55.759):
Using configobj version 5.1.0 with validate version 1.0.1
DEBUG - core.main (14:09:55.767):
Initializing add-ons system
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.775):
Listing add-ons from C:\Users\Uporabnik\AppData\Roaming\nvda\addons
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.775):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\addonUpdater
DEBUG - addonHandler.Addon.__init__ (14:09:55.775):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\addonUpdater\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Found add-on addonUpdater - 19.05. Requires API: (2019, 1, 0). Last-tested API: (2019, 2, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\focusHighlight
DEBUG - addonHandler.Addon.__init__ (14:09:55.779):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\focusHighlight\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Found add-on focusHighlight - 5.6. Requires API: (2014, 1, 0). Last-tested API: (2019, 1, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.785):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\outlookExtended
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Found add-on outlookExtended - 1.1. Requires API: (2018, 3, 0). Last-tested API: (2019, 1, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Disabling add-on outlookExtended
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote
DEBUG - addonHandler.Addon.__init__ (14:09:55.789):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Found add-on remote - 2.2. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\wintenApps
DEBUG - addonHandler.Addon.__init__ (14:09:55.789):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\wintenApps\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.795):
Found add-on wintenApps - 19.05. Requires API: (2018, 4, 0). Last-tested API: (2019, 2, 0)
DEBUGWARNING - touchHandler.touchSupported (14:09:55.983):
No touch devices found
DEBUG - core.main (14:09:56.181):
Initializing appModule Handler
DEBUG - addonHandler.Addon.addToPackagePath (14:09:56.181):
Addon wintenApps added to appModules package path
DEBUG - core.main (14:09:56.181):
Initializing NVDAHelper
DEBUG - core.main (14:09:56.303):
Speech Dictionary processing
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
Loading speech dictionary 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\default.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
file 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\default.dic' not found.
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
Loading speech dictionary 'builtin.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.313):
3 loaded records.
DEBUG - core.main (14:09:56.313):
Initializing speech
WARNING - stdout (14:09:56.313):
hooked waveOutOpen
WARNING - stdout (14:09:56.313):
hooked waveOutClose
DEBUG - speechDictHandler.SpeechDict.load (14:09:57.348):
Loading speech dictionary 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\sapi5\sapi5-Renato eBralec.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:57.348):
file 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\sapi5\sapi5-Renato eBralec.dic' not found.
INFO - synthDriverHandler.setSynth (14:09:57.348):
Loaded synthDriver sapi5
DEBUGWARNING - core.main (14:09:57.348):
Slow starting core (5.08 sec)
IO - speech.speak (14:09:57.348):
Speaking [LangChangeCommand ('sl_SI'), u'Nalaganje NVDA. Prosimo, po\u010dakajte...']
DEBUGWARNING - characterProcessing._getSpeechSymbolsForLocale (14:09:57.348):
No CLDR data for locale sl_SI
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:09:57.943):
Unsupported speech command: LangChangeCommand ('sl_SI')
INFO - core.main (14:09:57.951):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
DEBUG - core.main (14:09:57.960):
Initializing braille input
INFO - brailleInput.initialize (14:09:57.960):
Braille input initialized
DEBUG - core.main (14:09:57.960):
Initializing braille
INFO - braille.initialize (14:09:57.960):
Using liblouis version 3.8.0
INFO - braille.BrailleHandler.setDisplayByName (14:09:57.970):
Loaded braille display driver noBraille, current display has 0 cells.
DEBUG - core.main (14:09:57.970):
Initializing displayModel
DEBUG - core.main (14:09:57.970):
Initializing GUI
DEBUG - core.main (14:09:58.016):
initializing Java Access Bridge support
WARNING - core.main (14:09:58.016):
Java Access Bridge not available
DEBUG - core.main (14:09:58.016):
Initializing winConsole support
DEBUG - core.main (14:09:58.016):
Initializing UIA support
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (14:09:58.032):
UIAutomation: IUIAutomation5
DEBUG - core.main (14:09:58.877):
Initializing IAccessible support
DEBUG - core.main (14:09:58.880):
Initializing input core
DEBUGWARNING - inputCore.InputManager.loadUserGestureMap (14:09:58.880):
No user gesture map
DEBUG - core.main (14:09:58.880):
Initializing keyboard handler
DEBUG - core.main (14:09:58.887):
initializing mouse handler
DEBUG - core.main (14:09:58.937):
Initializing touchHandler
DEBUGWARNING - touchHandler.touchSupported (14:09:58.937):
No touch devices found
DEBUG - core.main (14:09:58.937):
Initializing global plugin handler
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon addonUpdater added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon focusHighlight added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon remote added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon wintenApps added to globalPlugins package path
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:58.950):
W10: adding additional events
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:58.997):
W10: added event ID 20036, assigned to UIA_activeTextPositionChanged
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.062):
W10: added event ID 20026, assigned to UIA_dragStart
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.134):
W10: added event ID 20027, assigned to UIA_dragCancel
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.201):
W10: added event ID 20028, assigned to UIA_dragComplete
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.201):
W10: adding class name Popup to known dialog class names
DEBUGWARNING - Python warning (14:09:59.221):
C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\configuration.py:5: DeprecationWarning: Importing validate directly is deprecated. Please use configobj.validate instead
DEBUG - core.main (14:09:59.526):
Initializing core pump
DEBUG - core.main (14:09:59.526):
Initializing watchdog
DEBUG - core.main (14:09:59.561):
initializing updateCheck
INFO - core.main (14:09:59.598):
NVDA initialized
DEBUG - core.main (14:09:59.598):
entering wx application main loop
IO - speech.speak (14:10:00.338):
Speaking [LangChangeCommand ('sl_SI'), u'Opravilna vrstica']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:00.338):
Unsupported speech command: LangChangeCommand ('sl_SI')
INFO - external:globalPlugins.remoteClient.GlobalPlugin.on_connected_as_slave (14:10:00.888):
Control connector connected
IO - speech.speak (14:10:00.891):
Speaking [LangChangeCommand ('sl_SI'), u'Povezano z nadzornim stre\u017enikom']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:00.891):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - tones.beep (14:10:01.000):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.042):
Beep at pitch 1000, for 300 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.223):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.428):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - inputCore.InputManager.executeGesture (14:10:02.273):
Input: kb(desktop):tab
IO - speech.speak (14:10:02.513):
Speaking [LangChangeCommand ('sl_SI'), u'Programi, ki se izvajajo orodna vrstica']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:02.513):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:02.533):
Speaking [LangChangeCommand ('sl_SI'), u'Google Chrome gumb 1 od 5']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:02.533):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:03.375):
Speaking [LangChangeCommand ('sl_SI'), u'Google Chrome zaslonski namig']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:03.375):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:03.936):
Input: kb(desktop):leftArrow
IO - speech.speak (14:10:04.029):
Speaking [LangChangeCommand ('sl_SI'), u'Outlook 2016 \u2013 \u0161tevilo odprtih oken: 1 gumb podMeni 4 od 5']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:04.035):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:04.904):
Input: kb(desktop):enter
IO - speech.speak (14:10:05.170):
Speaking [LangChangeCommand ('sl_SI'), u'Prejeto \u2013 nada.jazbec59@... - Outlook']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.176):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:05.266):
Speaking [LangChangeCommand ('sl_SI'), u'Pogled tabele tabela']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.266):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:05.312):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes razvr\u0161\u010danje v skupino Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes ozna\u010deno razprto vrstica 1 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.322):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:06.062):
Input: kb(desktop):downArrow
IO - inputCore.InputManager.executeGesture (14:10:06.864):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:07.835):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1585 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:07.881):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:08.838):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1610 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:09.338):
Input: kb(desktop):NVDA+upArrow
IO - speech.speak (14:10:09.355):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:09.355):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:10.359):
Input: kb(desktop):shift+tab
IO - speech.speak (14:10:10.493):
Speaking [LangChangeCommand ('sl_SI'), u'NUIDocumentWindow']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.500):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:10.598):
Speaking [LangChangeCommand ('sl_SI'), u'Priljubljene drevesni pogled']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.598):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:10.638):
Speaking [LangChangeCommand ('sl_SI'), u'nivo 2 Prejeto']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.638):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:11.552):
Input: kb(desktop):tab
IO - speech.speak (14:10:11.658):
Speaking [LangChangeCommand ('sl_SI'), u'Pogled tabele tabela']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:11.658):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:11.678):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: V\u010deraj razvr\u0161\u010danje v skupino razprto vrstica 4 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:11.684):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:13.717):
Speaking [LangChangeCommand ('sl_SI'), u's prilogo Od Hana Premrl, Zadeva [Utzo.lur] \u0160ivanje, Prejeto pon. 15:27, Velikost 4 MB, vrstica 5 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:13.720):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:13.730):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.184):
oleacc.AccessibleObjectFromEvent with window 395150, objectID 1616 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.200):
oleacc.AccessibleObjectFromEvent with window 395150, objectID 1617 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.358):
oleacc.AccessibleObjectFromEvent with window 395160, objectID 1618 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.358):
oleacc.AccessibleObjectFromEvent with window 395160, objectID 1619 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.405):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1620 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.427):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1621 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.513):
oleacc.AccessibleObjectFromEvent with window 525542, objectID 1622 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.513):
oleacc.AccessibleObjectFromEvent with window 525542, objectID 1623 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.528):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1644 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.528):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1645 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.543):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1647 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.543):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1648 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.559):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1650 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.559):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1651 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:15.085):
Input: kb(desktop):upArrow
IO - inputCore.InputManager.executeGesture (14:10:15.835):
Input: kb(desktop):upArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.084):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1696 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.115):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1697 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.115):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1698 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.283):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1700 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.299):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1701 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.569):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1708 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.569):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1709 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.615):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1711 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.631):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1712 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.917):
oleacc.AccessibleObjectFromEvent with window 722796, objectID 1714 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.917):
oleacc.AccessibleObjectFromEvent with window 722796, objectID 1715 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.933):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1743 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.933):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1744 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.970):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1746 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.970):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1747 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.986):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1749 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.986):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1750 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:17.418):
Input: kb(desktop):NVDA+n
IO - speech.speak (14:10:17.618):
Speaking [LangChangeCommand ('sl_SI'), u'NVDA meni']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:17.618):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:18.410):
Input: kb(desktop):downArrow
IO - speech.speak (14:10:18.480):
Speaking [LangChangeCommand ('sl_SI'), u'Izbire podMeni i']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:18.490):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:19.375):
Input: kb(desktop):downArrow
IO - speech.speak (14:10:19.426):
Speaking [LangChangeCommand ('sl_SI'), u'Orodja podMeni o']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:19.426):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:20.177):
Input: kb(desktop):enter
IO - speech.speak (14:10:20.279):
Speaking [LangChangeCommand ('sl_SI'), u'Preglej dnevnik 1 od 9']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:20.279):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:21.196):
Input: kb(desktop):enter

----- ending of log -----

thanks again.

regards, Jožef

Re: outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

Gene

#61521

The list, as most lists, doesn't allow attachments. I don't know if a button is available for that function since I don't know if group moderators can enable it but for most groups, the question is moot anyway.

Gene

Show quoted text

----- Original Message -----

From: J.G

Sent: Wednesday, May 08, 2019 11:49 AM

To: nvda@nvda.groups.io

Subject: Re: [nvda] outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

Hello,

I checked objectnavigation and screen review and she has nvda set on object navigation (object review). also tried with changing a review with same results. due I cannot find button for attachments on a web interfaceof this group I am postin a log here in message body. hope, it will help.

----- beginning of log -----

INFO - __main__ (14:09:55.174):
Starting NVDA
INFO - core.main (14:09:55.471):
Config dir: C:\Users\Uporabnik\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (14:09:55.471):
Loading config: C:\Users\Uporabnik\AppData\Roaming\nvda\nvda.ini
INFO - config.ConfigManager._loadConfig (14:09:55.503):
Config loaded (after upgrade, and in the state it will be used by NVDA):
{u'schemaVersion': u'2', u'development': {u'enableScratchpadDir': u'False'}, u'upgrade': {}, u'update': {u'allowUsageStats': u'True', u'askedAllowUsageStats': u'True', u'autoCheck': u'True', u'startupNotification': u'True'}, u'general': {u'showWelcomeDialogAtStartup': u'False', u'language': u'Windows', u'saveConfigurationOnExit': u'True', u'askToExit': u'True', u'playStartAndExitSounds': u'True', u'loggingLevel': u'DEBUG'}, u'speech': {u'synth': u'sapi5', u'outputDevice': u'Microsoft Sound Mapper', u'oneCore': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech_OneCore\\Voices\\Tokens\\MSTTS_V110_slSI_Lado', u'volume': u'100'}, u'sapi5': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech\\Voices\\Tokens\\eBraRenato', u'volume': u'100'}}, u'braille': {u'noBraille': {u'port': u''}}, u'keyboard': {u'speakCommandKeys': u'False', u'speakTypedWords': u'True'}, u'presentation': {u'reportTooltips': u'True', u'guessObjectPositionInformationWhenUnavailable': u'True'}, u'uwpOcr': {u'language': u'sl'}, u'documentFormatting': {u'autoLanguageSwitching': u'True'}}
DEBUG - core.main (14:09:55.706):
setting language to Windows
INFO - core.main (14:09:55.759):
NVDA version 2019.1.1
INFO - core.main (14:09:55.759):
Using Windows version 10.0.17134 workstation
INFO - core.main (14:09:55.759):
Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]
INFO - core.main (14:09:55.759):
Using comtypes version 1.1.3
INFO - core.main (14:09:55.759):
Using configobj version 5.1.0 with validate version 1.0.1
DEBUG - core.main (14:09:55.767):
Initializing add-ons system
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.775):
Listing add-ons from C:\Users\Uporabnik\AppData\Roaming\nvda\addons
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.775):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\addonUpdater
DEBUG - addonHandler.Addon.__init__ (14:09:55.775):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\addonUpdater\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Found add-on addonUpdater - 19.05. Requires API: (2019, 1, 0). Last-tested API: (2019, 2, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\focusHighlight
DEBUG - addonHandler.Addon.__init__ (14:09:55.779):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\focusHighlight\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Found add-on focusHighlight - 5.6. Requires API: (2014, 1, 0). Last-tested API: (2019, 1, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.785):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\outlookExtended
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Found add-on outlookExtended - 1.1. Requires API: (2018, 3, 0). Last-tested API: (2019, 1, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Disabling add-on outlookExtended
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote
DEBUG - addonHandler.Addon.__init__ (14:09:55.789):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Found add-on remote - 2.2. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\wintenApps
DEBUG - addonHandler.Addon.__init__ (14:09:55.789):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\wintenApps\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.795):
Found add-on wintenApps - 19.05. Requires API: (2018, 4, 0). Last-tested API: (2019, 2, 0)
DEBUGWARNING - touchHandler.touchSupported (14:09:55.983):
No touch devices found
DEBUG - core.main (14:09:56.181):
Initializing appModule Handler
DEBUG - addonHandler.Addon.addToPackagePath (14:09:56.181):
Addon wintenApps added to appModules package path
DEBUG - core.main (14:09:56.181):
Initializing NVDAHelper
DEBUG - core.main (14:09:56.303):
Speech Dictionary processing
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
Loading speech dictionary 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\default.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
file 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\default.dic' not found.
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
Loading speech dictionary 'builtin.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.313):
3 loaded records.
DEBUG - core.main (14:09:56.313):
Initializing speech
WARNING - stdout (14:09:56.313):
hooked waveOutOpen
WARNING - stdout (14:09:56.313):
hooked waveOutClose
DEBUG - speechDictHandler.SpeechDict.load (14:09:57.348):
Loading speech dictionary 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\sapi5\sapi5-Renato eBralec.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:57.348):
file 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\sapi5\sapi5-Renato eBralec.dic' not found.
INFO - synthDriverHandler.setSynth (14:09:57.348):
Loaded synthDriver sapi5
DEBUGWARNING - core.main (14:09:57.348):
Slow starting core (5.08 sec)
IO - speech.speak (14:09:57.348):
Speaking [LangChangeCommand ('sl_SI'), u'Nalaganje NVDA. Prosimo, po\u010dakajte...']
DEBUGWARNING - characterProcessing._getSpeechSymbolsForLocale (14:09:57.348):
No CLDR data for locale sl_SI
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:09:57.943):
Unsupported speech command: LangChangeCommand ('sl_SI')
INFO - core.main (14:09:57.951):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
DEBUG - core.main (14:09:57.960):
Initializing braille input
INFO - brailleInput.initialize (14:09:57.960):
Braille input initialized
DEBUG - core.main (14:09:57.960):
Initializing braille
INFO - braille.initialize (14:09:57.960):
Using liblouis version 3.8.0
INFO - braille.BrailleHandler.setDisplayByName (14:09:57.970):
Loaded braille display driver noBraille, current display has 0 cells.
DEBUG - core.main (14:09:57.970):
Initializing displayModel
DEBUG - core.main (14:09:57.970):
Initializing GUI
DEBUG - core.main (14:09:58.016):
initializing Java Access Bridge support
WARNING - core.main (14:09:58.016):
Java Access Bridge not available
DEBUG - core.main (14:09:58.016):
Initializing winConsole support
DEBUG - core.main (14:09:58.016):
Initializing UIA support
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (14:09:58.032):
UIAutomation: IUIAutomation5
DEBUG - core.main (14:09:58.877):
Initializing IAccessible support
DEBUG - core.main (14:09:58.880):
Initializing input core
DEBUGWARNING - inputCore.InputManager.loadUserGestureMap (14:09:58.880):
No user gesture map
DEBUG - core.main (14:09:58.880):
Initializing keyboard handler
DEBUG - core.main (14:09:58.887):
initializing mouse handler
DEBUG - core.main (14:09:58.937):
Initializing touchHandler
DEBUGWARNING - touchHandler.touchSupported (14:09:58.937):
No touch devices found
DEBUG - core.main (14:09:58.937):
Initializing global plugin handler
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon addonUpdater added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon focusHighlight added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon remote added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon wintenApps added to globalPlugins package path
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:58.950):
W10: adding additional events
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:58.997):
W10: added event ID 20036, assigned to UIA_activeTextPositionChanged
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.062):
W10: added event ID 20026, assigned to UIA_dragStart
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.134):
W10: added event ID 20027, assigned to UIA_dragCancel
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.201):
W10: added event ID 20028, assigned to UIA_dragComplete
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.201):
W10: adding class name Popup to known dialog class names
DEBUGWARNING - Python warning (14:09:59.221):
C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\configuration.py:5: DeprecationWarning: Importing validate directly is deprecated. Please use configobj.validate instead
DEBUG - core.main (14:09:59.526):
Initializing core pump
DEBUG - core.main (14:09:59.526):
Initializing watchdog
DEBUG - core.main (14:09:59.561):
initializing updateCheck
INFO - core.main (14:09:59.598):
NVDA initialized
DEBUG - core.main (14:09:59.598):
entering wx application main loop
IO - speech.speak (14:10:00.338):
Speaking [LangChangeCommand ('sl_SI'), u'Opravilna vrstica']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:00.338):
Unsupported speech command: LangChangeCommand ('sl_SI')
INFO - external:globalPlugins.remoteClient.GlobalPlugin.on_connected_as_slave (14:10:00.888):
Control connector connected
IO - speech.speak (14:10:00.891):
Speaking [LangChangeCommand ('sl_SI'), u'Povezano z nadzornim stre\u017enikom']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:00.891):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - tones.beep (14:10:01.000):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.042):
Beep at pitch 1000, for 300 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.223):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.428):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - inputCore.InputManager.executeGesture (14:10:02.273):
Input: kb(desktop):tab
IO - speech.speak (14:10:02.513):
Speaking [LangChangeCommand ('sl_SI'), u'Programi, ki se izvajajo orodna vrstica']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:02.513):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:02.533):
Speaking [LangChangeCommand ('sl_SI'), u'Google Chrome gumb 1 od 5']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:02.533):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:03.375):
Speaking [LangChangeCommand ('sl_SI'), u'Google Chrome zaslonski namig']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:03.375):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:03.936):
Input: kb(desktop):leftArrow
IO - speech.speak (14:10:04.029):
Speaking [LangChangeCommand ('sl_SI'), u'Outlook 2016 \u2013 \u0161tevilo odprtih oken: 1 gumb podMeni 4 od 5']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:04.035):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:04.904):
Input: kb(desktop):enter
IO - speech.speak (14:10:05.170):
Speaking [LangChangeCommand ('sl_SI'), u'Prejeto \u2013 nada.jazbec59@... - Outlook']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.176):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:05.266):
Speaking [LangChangeCommand ('sl_SI'), u'Pogled tabele tabela']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.266):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:05.312):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes razvr\u0161\u010danje v skupino Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes ozna\u010deno razprto vrstica 1 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.322):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:06.062):
Input: kb(desktop):downArrow
IO - inputCore.InputManager.executeGesture (14:10:06.864):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:07.835):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1585 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:07.881):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:08.838):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1610 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:09.338):
Input: kb(desktop):NVDA+upArrow
IO - speech.speak (14:10:09.355):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:09.355):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:10.359):
Input: kb(desktop):shift+tab
IO - speech.speak (14:10:10.493):
Speaking [LangChangeCommand ('sl_SI'), u'NUIDocumentWindow']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.500):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:10.598):
Speaking [LangChangeCommand ('sl_SI'), u'Priljubljene drevesni pogled']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.598):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:10.638):
Speaking [LangChangeCommand ('sl_SI'), u'nivo 2 Prejeto']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.638):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:11.552):
Input: kb(desktop):tab
IO - speech.speak (14:10:11.658):
Speaking [LangChangeCommand ('sl_SI'), u'Pogled tabele tabela']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:11.658):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:11.678):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: V\u010deraj razvr\u0161\u010danje v skupino razprto vrstica 4 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:11.684):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:13.717):
Speaking [LangChangeCommand ('sl_SI'), u's prilogo Od Hana Premrl, Zadeva [Utzo.lur] \u0160ivanje, Prejeto pon. 15:27, Velikost 4 MB, vrstica 5 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:13.720):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:13.730):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.184):
oleacc.AccessibleObjectFromEvent with window 395150, objectID 1616 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.200):
oleacc.AccessibleObjectFromEvent with window 395150, objectID 1617 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.358):
oleacc.AccessibleObjectFromEvent with window 395160, objectID 1618 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.358):
oleacc.AccessibleObjectFromEvent with window 395160, objectID 1619 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.405):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1620 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.427):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1621 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.513):
oleacc.AccessibleObjectFromEvent with window 525542, objectID 1622 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.513):
oleacc.AccessibleObjectFromEvent with window 525542, objectID 1623 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.528):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1644 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.528):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1645 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.543):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1647 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.543):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1648 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.559):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1650 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.559):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1651 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:15.085):
Input: kb(desktop):upArrow
IO - inputCore.InputManager.executeGesture (14:10:15.835):
Input: kb(desktop):upArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.084):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1696 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.115):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1697 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.115):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1698 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.283):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1700 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.299):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1701 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.569):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1708 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.569):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1709 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.615):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1711 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.631):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1712 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.917):
oleacc.AccessibleObjectFromEvent with window 722796, objectID 1714 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.917):
oleacc.AccessibleObjectFromEvent with window 722796, objectID 1715 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.933):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1743 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.933):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1744 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.970):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1746 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.970):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1747 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.986):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1749 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.986):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1750 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:17.418):
Input: kb(desktop):NVDA+n
IO - speech.speak (14:10:17.618):
Speaking [LangChangeCommand ('sl_SI'), u'NVDA meni']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:17.618):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:18.410):
Input: kb(desktop):downArrow
IO - speech.speak (14:10:18.480):
Speaking [LangChangeCommand ('sl_SI'), u'Izbire podMeni i']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:18.490):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:19.375):
Input: kb(desktop):downArrow
IO - speech.speak (14:10:19.426):
Speaking [LangChangeCommand ('sl_SI'), u'Orodja podMeni o']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:19.426):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:20.177):
Input: kb(desktop):enter
IO - speech.speak (14:10:20.279):
Speaking [LangChangeCommand ('sl_SI'), u'Preglej dnevnik 1 od 9']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:20.279):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:21.196):
Input: kb(desktop):enter

----- ending of log -----

thanks again.

regards, Jožef

Re: off-topic: services that allow you to accessibly build forms

Nimer Jaber

#61520

this topic is now closed. It is off-topic, the subject states it is off-topic, I believed this morning that the thread would die, but it has not. Please, if a thread is off-topic, if it does not relate to NVDA, do not post it to this group and certainly, do not reply to it on this group. This discussion is better had on the chat list, or on other tech mailing lists.

Thanks.

Show quoted text

On Wed, May 8, 2019 at 10:18 AM Cristóbal <cristobalmuli@...> wrote:

I’m sure google Docs can do this. I know I’ve filled out forms this way before.

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Chris via Groups.Io
Sent: Wednesday, May 8, 2019 12:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] off-topic: services that allow you to accessibly build forms

Another one that didn’t get the memo 🤣

From: Governor staten
Sent: 08 May 2019 05:35
To: nvda@nvda.groups.io
Subject: [nvda] off-topic: services that allow you to accessibly build forms

Hello list. This is the genesis of the question. I have to build a form for an event registration. I tried out Jotform. Unless I’m severely mistaken, it doesn’t work well at all with screen reading software.

Very simple question. What form building services do work well with screen readers? Google Forms is okay, I recall. Any others out there? Please respond to my email address: govsta@...
If you have any ideas.

If it helps you any, I have a website with Wordpress installed. If you can suggest any good plugins, I’d entertain those as well. Thanks in advance for any ideas you can throw my way.

--

Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!

Re: outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

J.G

#61519

Sorry forgot to add, that I also tried with com registration tool if it would have helped, but there were same results.

Re: off-topic: services that allow you to accessibly build forms

Cristóbal

#61518

I’m sure google Docs can do this. I know I’ve filled out forms this way before.

Show quoted text

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Chris via Groups.Io
Sent: Wednesday, May 8, 2019 12:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] off-topic: services that allow you to accessibly build forms

Another one that didn’t get the memo 🤣

From: Governor staten
Sent: 08 May 2019 05:35
To: nvda@nvda.groups.io
Subject: [nvda] off-topic: services that allow you to accessibly build forms

Hello list. This is the genesis of the question. I have to build a form for an event registration. I tried out Jotform. Unless I’m severely mistaken, it doesn’t work well at all with screen reading software.

Very simple question. What form building services do work well with screen readers? Google Forms is okay, I recall. Any others out there? Please respond to my email address: govsta@...

If you have any ideas.

If it helps you any, I have a website with Wordpress installed. If you can suggest any good plugins, I’d entertain those as well. Thanks in advance for any ideas you can throw my way.

Re: NVDA and issue with Zoom

Chris G

#61517

Hi,

Can’t seem to get that menu to read.

The latest version of Zoom seems to be pretty accessible. I installed it last Thursday and am seeing lots of improvements. Just this DND menu doesn’t read with NVDA that I have found so far.

Before I report it to Zoom I wanted to see if anyone else could duplicate.

Thanks much,

Chris

Show quoted text

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, May 8, 2019 12:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and issue with Zoom

Try it in object nav, in fact I use zoom in nothingn but object nav in that regard.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 8 May 2019, at 8:53, Chris G wrote:

Hi all,

I’m using the latest version of NVDA the Zoom conference platform under Windows 10.

I am having an issue setting DND.
I load the Zoom window.
Access the home tab
Tab to my name and press space.
Select DND from the menu.
Once I press enter on DND I should be able to arrow through the options, such as 20 minutes 1 hour etc.
The above steps assume I am already signed into my Zoom account.

Using JAWS 2019and narrator these options read and I can select them but can’t in NVDA.

Has anyone seen this issue?

Thanks,
Chris

Re: Weather_Plus 6.0 available

Rémy Ruiz

#61516

Hi Gerardo,

Can you please download this version 6.1, is the last version available;

http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon

I add only for those who still have problems, as already suggested by someone to go it:
1. press left windows key+r.
2. paste the line:
%appdata%\nvda\
3. delete the file weather.ini.
4. Press nvda+ctrl+f3 and reconfigure the add-on normally.http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon
Thanks.
Rémy

Show quoted text

Le 08/05/2019 à 02:04, Gerardo Corripio a écrit :

Nothing Works. I installed the two versions but nothing. It only makesthe sound when I go into theSeacities.Afterwards the setting is unavailable. Hope to get it fixed son!

Enviado desde Correo para Windows 10

De: Adriano Barbieri via Groups.Io
Enviado: martes, 7 de mayo de 2019 04:56 p. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

Hi,

I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know

Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):

Hi to every one,

Note for those who were using versions 5 of Weather_Plus (Apixu API)::

The list of cities you have is not compatible with this new version, don't worry, Weather_Plus will allow you to retrieve them via the settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat commitment to include Weather_Plus in the automatic translation system and restoring the download link on the international page.

Best regards

Adriano Barbieri

Re: outlook 2016 and NVDA 2019.1.1: nvda's focus does not go to next/previous message after pressing up/down key in message list

J.G

#61515

Hello,

I checked objectnavigation and screen review and she has nvda set on object navigation (object review). also tried with changing a review with same results. due I cannot find button for attachments on a web interfaceof this group I am postin a log here in message body. hope, it will help.

----- beginning of log -----

INFO - __main__ (14:09:55.174):
Starting NVDA
INFO - core.main (14:09:55.471):
Config dir: C:\Users\Uporabnik\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (14:09:55.471):
Loading config: C:\Users\Uporabnik\AppData\Roaming\nvda\nvda.ini
INFO - config.ConfigManager._loadConfig (14:09:55.503):
Config loaded (after upgrade, and in the state it will be used by NVDA):
{u'schemaVersion': u'2', u'development': {u'enableScratchpadDir': u'False'}, u'upgrade': {}, u'update': {u'allowUsageStats': u'True', u'askedAllowUsageStats': u'True', u'autoCheck': u'True', u'startupNotification': u'True'}, u'general': {u'showWelcomeDialogAtStartup': u'False', u'language': u'Windows', u'saveConfigurationOnExit': u'True', u'askToExit': u'True', u'playStartAndExitSounds': u'True', u'loggingLevel': u'DEBUG'}, u'speech': {u'synth': u'sapi5', u'outputDevice': u'Microsoft Sound Mapper', u'oneCore': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech_OneCore\\Voices\\Tokens\\MSTTS_V110_slSI_Lado', u'volume': u'100'}, u'sapi5': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech\\Voices\\Tokens\\eBraRenato', u'volume': u'100'}}, u'braille': {u'noBraille': {u'port': u''}}, u'keyboard': {u'speakCommandKeys': u'False', u'speakTypedWords': u'True'}, u'presentation': {u'reportTooltips': u'True', u'guessObjectPositionInformationWhenUnavailable': u'True'}, u'uwpOcr': {u'language': u'sl'}, u'documentFormatting': {u'autoLanguageSwitching': u'True'}}
DEBUG - core.main (14:09:55.706):
setting language to Windows
INFO - core.main (14:09:55.759):
NVDA version 2019.1.1
INFO - core.main (14:09:55.759):
Using Windows version 10.0.17134 workstation
INFO - core.main (14:09:55.759):
Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]
INFO - core.main (14:09:55.759):
Using comtypes version 1.1.3
INFO - core.main (14:09:55.759):
Using configobj version 5.1.0 with validate version 1.0.1
DEBUG - core.main (14:09:55.767):
Initializing add-ons system
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.775):
Listing add-ons from C:\Users\Uporabnik\AppData\Roaming\nvda\addons
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.775):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\addonUpdater
DEBUG - addonHandler.Addon.__init__ (14:09:55.775):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\addonUpdater\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Found add-on addonUpdater - 19.05. Requires API: (2019, 1, 0). Last-tested API: (2019, 2, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\focusHighlight
DEBUG - addonHandler.Addon.__init__ (14:09:55.779):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\focusHighlight\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.779):
Found add-on focusHighlight - 5.6. Requires API: (2014, 1, 0). Last-tested API: (2019, 1, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.785):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\outlookExtended
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Found add-on outlookExtended - 1.1. Requires API: (2018, 3, 0). Last-tested API: (2019, 1, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Disabling add-on outlookExtended
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote
DEBUG - addonHandler.Addon.__init__ (14:09:55.789):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Found add-on remote - 2.2. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.789):
Loading add-on from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\wintenApps
DEBUG - addonHandler.Addon.__init__ (14:09:55.789):
Using manifest translation from C:\Users\Uporabnik\AppData\Roaming\nvda\addons\wintenApps\locale\sl\manifest.ini
DEBUG - addonHandler._getAvailableAddonsFromPath (14:09:55.795):
Found add-on wintenApps - 19.05. Requires API: (2018, 4, 0). Last-tested API: (2019, 2, 0)
DEBUGWARNING - touchHandler.touchSupported (14:09:55.983):
No touch devices found
DEBUG - core.main (14:09:56.181):
Initializing appModule Handler
DEBUG - addonHandler.Addon.addToPackagePath (14:09:56.181):
Addon wintenApps added to appModules package path
DEBUG - core.main (14:09:56.181):
Initializing NVDAHelper
DEBUG - core.main (14:09:56.303):
Speech Dictionary processing
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
Loading speech dictionary 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\default.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
file 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\default.dic' not found.
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.303):
Loading speech dictionary 'builtin.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:56.313):
3 loaded records.
DEBUG - core.main (14:09:56.313):
Initializing speech
WARNING - stdout (14:09:56.313):
hooked waveOutOpen
WARNING - stdout (14:09:56.313):
hooked waveOutClose
DEBUG - speechDictHandler.SpeechDict.load (14:09:57.348):
Loading speech dictionary 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\sapi5\sapi5-Renato eBralec.dic'...
DEBUG - speechDictHandler.SpeechDict.load (14:09:57.348):
file 'C:\Users\Uporabnik\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\sapi5\sapi5-Renato eBralec.dic' not found.
INFO - synthDriverHandler.setSynth (14:09:57.348):
Loaded synthDriver sapi5
DEBUGWARNING - core.main (14:09:57.348):
Slow starting core (5.08 sec)
IO - speech.speak (14:09:57.348):
Speaking [LangChangeCommand ('sl_SI'), u'Nalaganje NVDA. Prosimo, po\u010dakajte...']
DEBUGWARNING - characterProcessing._getSpeechSymbolsForLocale (14:09:57.348):
No CLDR data for locale sl_SI
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:09:57.943):
Unsupported speech command: LangChangeCommand ('sl_SI')
INFO - core.main (14:09:57.951):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
DEBUG - core.main (14:09:57.960):
Initializing braille input
INFO - brailleInput.initialize (14:09:57.960):
Braille input initialized
DEBUG - core.main (14:09:57.960):
Initializing braille
INFO - braille.initialize (14:09:57.960):
Using liblouis version 3.8.0
INFO - braille.BrailleHandler.setDisplayByName (14:09:57.970):
Loaded braille display driver noBraille, current display has 0 cells.
DEBUG - core.main (14:09:57.970):
Initializing displayModel
DEBUG - core.main (14:09:57.970):
Initializing GUI
DEBUG - core.main (14:09:58.016):
initializing Java Access Bridge support
WARNING - core.main (14:09:58.016):
Java Access Bridge not available
DEBUG - core.main (14:09:58.016):
Initializing winConsole support
DEBUG - core.main (14:09:58.016):
Initializing UIA support
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (14:09:58.032):
UIAutomation: IUIAutomation5
DEBUG - core.main (14:09:58.877):
Initializing IAccessible support
DEBUG - core.main (14:09:58.880):
Initializing input core
DEBUGWARNING - inputCore.InputManager.loadUserGestureMap (14:09:58.880):
No user gesture map
DEBUG - core.main (14:09:58.880):
Initializing keyboard handler
DEBUG - core.main (14:09:58.887):
initializing mouse handler
DEBUG - core.main (14:09:58.937):
Initializing touchHandler
DEBUGWARNING - touchHandler.touchSupported (14:09:58.937):
No touch devices found
DEBUG - core.main (14:09:58.937):
Initializing global plugin handler
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon addonUpdater added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon focusHighlight added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon remote added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (14:09:58.937):
Addon wintenApps added to globalPlugins package path
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:58.950):
W10: adding additional events
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:58.997):
W10: added event ID 20036, assigned to UIA_activeTextPositionChanged
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.062):
W10: added event ID 20026, assigned to UIA_dragStart
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.134):
W10: added event ID 20027, assigned to UIA_dragCancel
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.201):
W10: added event ID 20028, assigned to UIA_dragComplete
DEBUG - external:globalPlugins.wintenObjs.GlobalPlugin.__init__ (14:09:59.201):
W10: adding class name Popup to known dialog class names
DEBUGWARNING - Python warning (14:09:59.221):
C:\Users\Uporabnik\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\configuration.py:5: DeprecationWarning: Importing validate directly is deprecated. Please use configobj.validate instead
DEBUG - core.main (14:09:59.526):
Initializing core pump
DEBUG - core.main (14:09:59.526):
Initializing watchdog
DEBUG - core.main (14:09:59.561):
initializing updateCheck
INFO - core.main (14:09:59.598):
NVDA initialized
DEBUG - core.main (14:09:59.598):
entering wx application main loop
IO - speech.speak (14:10:00.338):
Speaking [LangChangeCommand ('sl_SI'), u'Opravilna vrstica']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:00.338):
Unsupported speech command: LangChangeCommand ('sl_SI')
INFO - external:globalPlugins.remoteClient.GlobalPlugin.on_connected_as_slave (14:10:00.888):
Control connector connected
IO - speech.speak (14:10:00.891):
Speaking [LangChangeCommand ('sl_SI'), u'Povezano z nadzornim stre\u017enikom']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:00.891):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - tones.beep (14:10:01.000):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.042):
Beep at pitch 1000, for 300 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.223):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - tones.beep (14:10:01.428):
Beep at pitch 720, for 100 ms, left volume 50, right volume 50
IO - inputCore.InputManager.executeGesture (14:10:02.273):
Input: kb(desktop):tab
IO - speech.speak (14:10:02.513):
Speaking [LangChangeCommand ('sl_SI'), u'Programi, ki se izvajajo orodna vrstica']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:02.513):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:02.533):
Speaking [LangChangeCommand ('sl_SI'), u'Google Chrome gumb 1 od 5']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:02.533):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:03.375):
Speaking [LangChangeCommand ('sl_SI'), u'Google Chrome zaslonski namig']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:03.375):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:03.936):
Input: kb(desktop):leftArrow
IO - speech.speak (14:10:04.029):
Speaking [LangChangeCommand ('sl_SI'), u'Outlook 2016 \u2013 \u0161tevilo odprtih oken: 1 gumb podMeni 4 od 5']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:04.035):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:04.904):
Input: kb(desktop):enter
IO - speech.speak (14:10:05.170):
Speaking [LangChangeCommand ('sl_SI'), u'Prejeto \u2013 nada.jazbec59@... - Outlook']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.176):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:05.266):
Speaking [LangChangeCommand ('sl_SI'), u'Pogled tabele tabela']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.266):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:05.312):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes razvr\u0161\u010danje v skupino Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes ozna\u010deno razprto vrstica 1 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:05.322):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:06.062):
Input: kb(desktop):downArrow
IO - inputCore.InputManager.executeGesture (14:10:06.864):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:07.835):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1585 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:07.881):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:08.838):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1610 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:09.338):
Input: kb(desktop):NVDA+upArrow
IO - speech.speak (14:10:09.355):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes Zdru\u017ei po: Raz\u0161irjeno: Datum: Danes']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:09.355):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:10.359):
Input: kb(desktop):shift+tab
IO - speech.speak (14:10:10.493):
Speaking [LangChangeCommand ('sl_SI'), u'NUIDocumentWindow']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.500):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:10.598):
Speaking [LangChangeCommand ('sl_SI'), u'Priljubljene drevesni pogled']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.598):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:10.638):
Speaking [LangChangeCommand ('sl_SI'), u'nivo 2 Prejeto']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:10.638):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:11.552):
Input: kb(desktop):tab
IO - speech.speak (14:10:11.658):
Speaking [LangChangeCommand ('sl_SI'), u'Pogled tabele tabela']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:11.658):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:11.678):
Speaking [LangChangeCommand ('sl_SI'), u'Zdru\u017ei po: Raz\u0161irjeno: Datum: V\u010deraj razvr\u0161\u010danje v skupino razprto vrstica 4 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:11.684):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - speech.speak (14:10:13.717):
Speaking [LangChangeCommand ('sl_SI'), u's prilogo Od Hana Premrl, Zadeva [Utzo.lur] \u0160ivanje, Prejeto pon. 15:27, Velikost 4 MB, vrstica 5 stolpec 1 do 12']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:13.720):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:13.730):
Input: kb(desktop):downArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.184):
oleacc.AccessibleObjectFromEvent with window 395150, objectID 1616 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.200):
oleacc.AccessibleObjectFromEvent with window 395150, objectID 1617 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.358):
oleacc.AccessibleObjectFromEvent with window 395160, objectID 1618 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.358):
oleacc.AccessibleObjectFromEvent with window 395160, objectID 1619 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.405):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1620 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.427):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1621 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.513):
oleacc.AccessibleObjectFromEvent with window 525542, objectID 1622 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.513):
oleacc.AccessibleObjectFromEvent with window 525542, objectID 1623 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.528):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1644 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.528):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1645 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.543):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1647 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.543):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1648 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.559):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1650 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:14.559):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1651 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:15.085):
Input: kb(desktop):upArrow
IO - inputCore.InputManager.executeGesture (14:10:15.835):
Input: kb(desktop):upArrow
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.084):
oleacc.AccessibleObjectFromEvent with window 1640136, objectID 1696 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.115):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1697 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.115):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1698 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.283):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1700 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.299):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1701 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.569):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1708 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.569):
oleacc.AccessibleObjectFromEvent with window 1574300, objectID 1709 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.615):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1711 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.631):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1712 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.917):
oleacc.AccessibleObjectFromEvent with window 722796, objectID 1714 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.917):
oleacc.AccessibleObjectFromEvent with window 722796, objectID 1715 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.933):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1743 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.933):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1744 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.970):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1746 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.970):
oleacc.AccessibleObjectFromEvent with window 395146, objectID 1747 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.986):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1749 and childID 0: [Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (14:10:16.986):
oleacc.AccessibleObjectFromEvent with window 395152, objectID 1750 and childID 0: [Error -2147467259] Unspecified error
IO - inputCore.InputManager.executeGesture (14:10:17.418):
Input: kb(desktop):NVDA+n
IO - speech.speak (14:10:17.618):
Speaking [LangChangeCommand ('sl_SI'), u'NVDA meni']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:17.618):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:18.410):
Input: kb(desktop):downArrow
IO - speech.speak (14:10:18.480):
Speaking [LangChangeCommand ('sl_SI'), u'Izbire podMeni i']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:18.490):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:19.375):
Input: kb(desktop):downArrow
IO - speech.speak (14:10:19.426):
Speaking [LangChangeCommand ('sl_SI'), u'Orodja podMeni o']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:19.426):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:20.177):
Input: kb(desktop):enter
IO - speech.speak (14:10:20.279):
Speaking [LangChangeCommand ('sl_SI'), u'Preglej dnevnik 1 od 9']
DEBUGWARNING - synthDrivers.sapi5.SynthDriver.speak (14:10:20.279):
Unsupported speech command: LangChangeCommand ('sl_SI')
IO - inputCore.InputManager.executeGesture (14:10:21.196):
Input: kb(desktop):enter

----- ending of log -----

thanks again.

regards, Jožef

Re: NVDA and issue with Zoom

Sarah k Alawami

#61514

Try it in object nav, in fact I use zoom in nothingn but object nav in that regard.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

Show quoted text

On 8 May 2019, at 8:53, Chris G wrote:

Hi all,

I’m using the latest version of NVDA the Zoom conference platform under Windows 10.

I am having an issue setting DND.
I load the Zoom window.
Access the home tab
Tab to my name and press space.
Select DND from the menu.
Once I press enter on DND I should be able to arrow through the options, such as 20 minutes 1 hour etc.
The above steps assume I am already signed into my Zoom account.

Using JAWS 2019and narrator these options read and I can select them but can’t in NVDA.

Has anyone seen this issue?

Thanks,
Chris

NVDA and issue with Zoom

Chris G

#61513

Hi all,

I’m using the latest version of NVDA the Zoom conference platform under Windows 10.

I am having an issue setting DND.

I load the Zoom window.
Access the home tab
Tab to my name and press space.
Select DND from the menu.

Once I press enter on DND I should be able to arrow through the options, such as 20 minutes 1 hour etc.

The above steps assume I am already signed into my Zoom account.

Using JAWS 2019and narrator these options read and I can select them but can’t in NVDA.

Has anyone seen this issue?

Thanks,

Chris

Re: Synthesizer support

Gene

#61512

I doubt you can but you can buy a very inexpensive external sound card, just plug it in, and attach your speakers. If you don't have sound, try rebooting while the sound card is connected.

Show quoted text

Gene

----- Original Message -----

From: Howard Traxler

Sent: Wednesday, May 08, 2019 8:52 AM

To: nvda@nvda.groups.io

Subject: [nvda] Synthesizer support

Happy Wednesday all.

Is there any way to make a portable copy of NVDA drive an old external
hardware synthesizer?

I have a computer that I messed up; deleted the sound drivers. And, of
course, nothing can talk now. But I do have several kinds of older
hardware serial and parallel synthesizers. If I can get it talking,
maybe I could reinstall the drivers?

Thanks.

Howard

Re: Weather_Plus 6.0 available

Aravind R

#61511

Thank you very much dear Adriano. after overwriting init.py. i am also
able to set permanent city successfully. initially i too had problem.

On 5/8/19, Adriano Barbieri via Groups.Io
<adrianobarb=yahoo.it@groups.io> wrote:
Hi Richard,

Thanks, apologies accepted.


Regards

Adriano


Il 08/05/2019 16:37, Richard Wells ha scritto:

Adriano: I downloaded and copied in the file. The next time I started
NVDA, it asked to update Weather Plus. Once that was done it allowed me to
set a city. Thank you for all your hard work and please forgive me for
sounding ungrateful to you. Providing trouble-shooting information
feedback was no place to express my personal frustration with the add-on
not working for me.

On 5/8/2019 1:31 AM, Adriano Barbieri via Groups.Io wrote:

Ah yes, the attachments do not pass, so download it:

https://www.dropbox.com/s/m399mmfgsjfyfpl/__init__.py?dl=1

overwrite the homonym file in:

%appdata%\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\


Regards

Adriano


Il 08/05/2019 07:57, Adriano Barbieri via Groups.Io ha scritto:

Hi Remi,

Last Modified 07/05/2019 22:50

Here it is attached.


I have to leave this afternoon, I'll be back on Monday, I can count on
you? I don't have a portable PC.


Regards

Adriano


Il 08/05/2019 00:39, Rémy Ruiz ha scritto:

Hi Adriano,

If this is the name of the file, I already have it, it is the first
corrective, the second corrective carries the same date.

__init__.py; 186 294; 48 099; Python File; 07/05/2019 18:46; 3D558965

Thanks for confirmation.

Rémy

Note:

Other things:

HiDoug Lee and all,
Thanks very much for your excellent explanation.
I do not use linux, I use Windows, but because the repository where
Weather_Plus is located does not use the Windows convention for CRLF?
The Notepadplusplus is used for the elaboration of the readme.md files
and they are encoded in UTF-8, I think that this is also used for the
elaboration of the source files, if I am not mistaken all the word
processor use the CRLF convention if you have Windows?
I think Zvonimir  should use this convension and not the LF convension
used by Linux seems more logical to me.
What you think?
How to avoid this in the future I do not know?
Thank you for this passionate debate.
Cheers.
Rémy

Doug Lee <nvda@dlee.org>
date  mardi 07/05/2019 à 22:29
[nvda-addons] Important note for Weather_Plus6.0 translators

English first:

Linux and Windows create text files differently: In Linux, lines end
with a line-feed character, or LF. In Windows, lines end with two
characters: A carriage return, or CR, followed by a line feed, LF. We
commonly abbreviate these as LF and CRLF, respectively.

Zvonimir was saying that the project uses the LF convention but your
files use the CRLF convention. The result is that comparing original
files with your files will make it seem like you changed every line in
the files. This, of course, is an accident; but it makes detecting
actual code changes more difficult.

My best, with Google's help, at Spanish for the above:

Anglais en premier:

Linux et Windows créent des fichiers texte différemment: Sous Linux,
les lignes se terminent par un caractère de saut de ligne, ou LF. Sous
Windows, les lignes se terminent par deux caractères: un retour à la
ligne, ou CR, suivi d’un saut de ligne, LF. Nous les abrégons
couramment en LF et CRLF, respectivement.

Zvonimir disait que le projet utilise la convention LF mais que vos
fichiers utilisent la convention CRLF. Le résultat est que la
comparaison des fichiers originaux avec vos fichiers donne l'impression
que vous avez changé chaque ligne des fichiers. Ceci, bien sûr, est un
accident; mais cela rend plus difficile la détection des modifications
de code réelles.

Mon meilleur, avec l'aide de Google, en espagnol pour ce qui précède:

On Tue, May 07, 2019 at 09:36:37PM +0200, R??my Ruiz wrote:
Hi,
A thousand apologies, I do not understand any of this I put the files
as they are in the addon, which is this I'm not a programmer or
anything like that, that's why I do not understand what you mean, tell
Noelia to explain me in Spanish or Abdel in french, Thank you.

Cheers.
Rémy

Le 07/05/2019 à 21:24, zvonimir stanečić, 9a5dsz a écrit :
The only thing is, that the project was conferted to the clrf.
I.e line endings.
These were in lf.
Oops! Please be careful next time...

Hi
I am fork this one and i made mi changes now after read this message:

git add .

git commit -m "my message"

git push origin master

All is fine with last sources corrected by Adriano.
Thanks.
Cheers.
Rémy


Le 07/05/2019 à 23:55, Adriano Barbieri via Groups.Io a écrit :

Hi,


I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again
Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know


Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):


Hi to every one,


Note for those who were using versions 5 of Weather_Plus (Apixu
API)::

The list of cities you have is not compatible with this new version,
don't worry, Weather_Plus will allow you to retrieve them via the
settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back
and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the
following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat
commitment to include Weather_Plus in the automatic translation
system and restoring the download link on the international page.


Best regards

Adriano Barbieri




-- 
-- 
nothing is difficult unless you make it appear so.

r. aravind,

Assistant manager
Department of sales
bank of baroda specialised mortgage store, Chennai.
mobile no: +91 9940369593,
email id : aravind_069@yahoo.com, aravind.andhrabank@gmail.com.
aravind.rajendran@bankofbaroda.co.in.