This also happens to me  maybe once a week. Usually holding down the NVDA key and tapping the letter N twice will reboot NVDA. H T H.

On 5/9/2019 10:04 AM, Roger Stewart wrote:

I've been noticing that somewhat often now, whenever I boot up my computer, nvda comes on, but all its hotkeys are dead. I can't even use nvda q to try to restart it. I have a P View utility that shows all processes running and can offer to stop any of them. I can then stop NVDA and then start it with its normal hotkey and then all is good. This is the only way I can get it going correctly aside from a total reboot. This has happened 3 times over the past week.  Does anyone know what causes this and is there any better way of getting out of this?

Thanks.

Roger

.

That certainly was ineffective when I attempted it. You really meant
NVDA key + n, Bryce?
On 5/9/19, Brice Mijares <bricemijares@att.net> wrote:

This also happens to me maybe once a week. Usually holding down the
NVDA key and tapping the letter N twice will reboot NVDA. H T H.

On 5/9/2019 10:04 AM, Roger Stewart wrote:

I've been noticing that somewhat often now, whenever I boot up my
computer, nvda comes on, but all its hotkeys are dead. I can't even use
nvda q to try to restart it. I have a P View utility that shows all
processes running and can offer to stop any of them. I can then stop
NVDA and then start it with its normal hotkey and then all is good. This
is the only way I can get it going correctly aside from a total reboot.
This has happened 3 times over the past week.  Does anyone know what
causes this and is there any better way of getting out of this?

Thanks.

Roger

This also happens to me maybe once a week. Usually holding down the
NVDA key and tapping the letter N twice will reboot NVDA. H T H.

On 5/9/2019 10:04 AM, Roger Stewart wrote:

I've been noticing that somewhat often now, whenever I boot up my
computer, nvda comes on, but all its hotkeys are dead. I can't even use
nvda q to try to restart it. I have a P View utility that shows all
processes running and can offer to stop any of them. I can then stop
NVDA and then start it with its normal hotkey and then all is good. This
is the only way I can get it going correctly aside from a total reboot.
This has happened 3 times over the past week.  Does anyone know what
causes this and is there any better way of getting out of this?

Thanks.

Roger

This also happens to me  maybe once a week. Usually holding down the NVDA key and tapping the letter N twice will reboot NVDA. H T H.
On 5/9/2019 10:04 AM, Roger Stewart wrote:

I've been noticing that somewhat often now, whenever I boot up my computer, nvda comes on, but all its hotkeys are dead. I can't even use nvda q to try to restart it. I have a P View utility that shows all processes running and can offer to stop any of them. I can then stop NVDA and then start it with its normal hotkey and then all is good. This is the only way I can get it going correctly aside from a total reboot. This has happened 3 times over the past week.  Does anyone know what causes this and is there any better way of getting out of this?

Thanks.

Roger

I've been noticing that somewhat often now, whenever I boot up my computer, nvda comes on, but all its hotkeys are dead. I can't even use nvda q to try to restart it. I have a P View utility that shows all processes running and can offer to stop any of them. I can then stop NVDA and then start it with its normal hotkey and then all is good. This is the only way I can get it going correctly aside from a total reboot. This has happened 3 times over the past week.  Does anyone know what causes this and is there any better way of getting out of this?
Thanks.
Roger

I doubt you can but you can buy a very inexpensive external sound card, just plug it in, and attach your speakers.  If you don't have sound, try rebooting while the sound card is connected. 

 

Gene

----- Original Message -----

From: Howard Traxler

Sent: Wednesday, May 08, 2019 8:52 AM

To: nvda@nvda.groups.io

Subject: [nvda] Synthesizer support

Happy Wednesday all.


Is there any way to make a portable copy of NVDA drive an old external
hardware synthesizer?


I have a computer that I messed up; deleted the sound drivers. And, of
course, nothing can talk now.  But I do have several kinds of older
hardware serial and parallel synthesizers.  If I can get it talking,
maybe I could reinstall the drivers?


Thanks.


Howard

I've been noticing that somewhat often now, whenever I boot up my
computer, nvda comes on, but all its hotkeys are dead. I can't even use
nvda q to try to restart it. I have a P View utility that shows all
processes running and can offer to stop any of them. I can then stop
NVDA and then start it with its normal hotkey and then all is good. This
is the only way I can get it going correctly aside from a total reboot.
This has happened 3 times over the past week.  Does anyone know what
causes this and is there any better way of getting out of this?

Thanks.

Roger

I did all the steps as it was written. But in vain. The key we provided to that person I entered. But I don't see the computer at all. So I don't know how I can do some things. Although I press a given key, it's completely silent, even though I switched to control remove and nothing. Of course I pressed the F11 key.

Hi all, Can anyone give me advice? in the instructions I read how to connect to the person via the NVDA remote. I tried everything possible, but I don't know why it still doesn't work for me. I didn't control the remote computer with the F11 key. I don't understand why. Thank!

Bravo bravo! It worked! Disregard the previous Email I’d sent a few minutes ago, about even though this morning updated to Weather Plus 6.2, it still didn’t work. Nevertheless I’d like a refresher on if this ever happens again, how would I extract the log, and send it through here? So far Weather Plus is awesome! Keep up the great work!

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Rémy Ruiz
Enviado: miércoles, 8 de mayo de 2019 11:54 a. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

 

Hi Gerardo,

Can you please download this version 6.1, is the last version available;

http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon

 

I add only for those who still have problems, as already suggested by someone to go it:
1. press left windows key+r.
2. paste the line:
%appdata%\nvda\
3. delete the file weather.ini.
4. Press nvda+ctrl+f3 and reconfigure the add-on normally.http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon
Thanks.
Rémy

Le 08/05/2019 à 02:04, Gerardo Corripio a écrit :

Nothing Works. I installed the two versions but nothing. It only makesthe sound when I go into theSeacities.Afterwards the setting is unavailable. Hope to get it fixed son!

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Adriano Barbieri via Groups.Io
Enviado: martes, 7 de mayo de 2019 04:56 p. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

 

Hi,

 

I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know

 

Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):

Hi to every one,


Note for those who were using versions 5 of Weather_Plus (Apixu API)::

The list of cities you have is not compatible with this new version, don't worry, Weather_Plus will allow you to retrieve them via the settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat commitment to include Weather_Plus in the automatic translation system and restoring the download link on the international page.


Best regards

Adriano Barbieri

 

 

Nothing Works. I installed the two versions but nothing. It only makesthe sound when I go into theSeacities.Afterwards the setting is unavailable. Hope to get it fixed son!

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Adriano Barbieri via Groups.Io
Enviado: martes, 7 de mayo de 2019 04:56 p. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

 

Hi,

 

I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know

 

Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):

Hi to every one,


Note for those who were using versions 5 of Weather_Plus (Apixu API)::

The list of cities you have is not compatible with this new version, don't worry, Weather_Plus will allow you to retrieve them via the settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat commitment to include Weather_Plus in the automatic translation system and restoring the download link on the international page.


Best regards

Adriano Barbieri

 

Ah yes, the attachments do not pass, so download it:

https://www.dropbox.com/s/m399mmfgsjfyfpl/__init__.py?dl=1

overwrite the homonym file in:

%appdata%\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\

 

Regards

Adriano

 

Il 08/05/2019 07:57, Adriano Barbieri via Groups.Io ha scritto:

Hi Remi,

Last Modified 07/05/2019 22:50

Here it is attached.

 

I have to leave this afternoon, I'll be back on Monday, I can count on you? I don't have a portable PC.

 

Regards

Adriano

 

Il 08/05/2019 00:39, Rémy Ruiz ha scritto:

Hi Adriano,

If this is the name of the file, I already have it, it is the first corrective, the second corrective carries the same date.

__init__.py; 186 294; 48 099; Python File; 07/05/2019 18:46; 3D558965

Thanks for confirmation.

Rémy

Note:

Other things:

HiDoug Lee and all,
Thanks very much for your excellent explanation.
I do not use linux, I use Windows, but because the repository where Weather_Plus is located does not use the Windows convention for CRLF?
The Notepadplusplus is used for the elaboration of the readme.md files and they are encoded in UTF-8, I think that this is also used for the elaboration of the source files, if I am not mistaken all the word processor use the CRLF convention if you have Windows?
I think Zvonimir  should use this convension and not the LF convension  used by Linux seems more logical to me.
What you think?
How to avoid this in the future I do not know?
Thank you for this passionate debate.
Cheers.
Rémy

Doug Lee <nvda@...>
date  mardi 07/05/2019 à 22:29
[nvda-addons] Important note for Weather_Plus6.0 translators

English first:

Linux and Windows create text files differently: In Linux, lines end with a line-feed character, or LF. In Windows, lines end with two characters: A carriage return, or CR, followed by a line feed, LF. We commonly abbreviate these as LF and CRLF, respectively.

Zvonimir was saying that the project uses the LF convention but your files use the CRLF convention. The result is that comparing original files with your files will make it seem like you changed every line in the files. This, of course, is an accident; but it makes detecting actual code changes more difficult.

My best, with Google's help, at Spanish for the above:

Anglais en premier:

Linux et Windows créent des fichiers texte différemment: Sous Linux, les lignes se terminent par un caractère de saut de ligne, ou LF. Sous Windows, les lignes se terminent par deux caractères: un retour à la ligne, ou CR, suivi d’un saut de ligne, LF. Nous les abrégons couramment en LF et CRLF, respectivement.

Zvonimir disait que le projet utilise la convention LF mais que vos fichiers utilisent la convention CRLF. Le résultat est que la comparaison des fichiers originaux avec vos fichiers donne l'impression que vous avez changé chaque ligne des fichiers. Ceci, bien sûr, est un accident; mais cela rend plus difficile la détection des modifications de code réelles.

Mon meilleur, avec l'aide de Google, en espagnol pour ce qui précède:

On Tue, May 07, 2019 at 09:36:37PM +0200, R??my Ruiz wrote:
Hi,
A thousand apologies, I do not understand any of this I put the files as they are in the addon, which is this I'm not a programmer or anything like that, that's why I do not understand what you mean, tell Noelia to explain me in Spanish or Abdel in french, Thank you.

Cheers.
Rémy

Le 07/05/2019 à 21:24, zvonimir stanečić, 9a5dsz a écrit :
The only thing is, that the project was conferted to the clrf.
I.e line endings.
These were in lf.
Oops! Please be careful next time...

Hi
I am fork this one and i made mi changes now after read this message:

git add .

git commit -m "my message"

git push origin master

All is fine with last sources corrected by Adriano.
Thanks.
Cheers.
Rémy

 

Le 07/05/2019 à 23:55, Adriano Barbieri via Groups.Io a écrit :

Hi,

 

I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know

 

Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):

Hi to every one,


Note for those who were using versions 5 of Weather_Plus (Apixu API)::

The list of cities you have is not compatible with this new version, don't worry, Weather_Plus will allow you to retrieve them via the settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat commitment to include Weather_Plus in the automatic translation system and restoring the download link on the international page.


Best regards

Adriano Barbieri

strange, my remote works fine.
you can try to restart nvda or reboot your computer per haps it helps.
what is the error message you hear?
cheers
paul otter


Op 9-5-2019 om 14:37 schreef Ján Kulik:

I have the latest version 2.2 with compatible nvda 2019.1