Date   

Re: weather plus 6.3

Rui Fontes
 

Confirming that is working now!

Rui Fontes


Às 14:25 de 14/05/2019, Adriano Barbieri via Groups.Io escreveu:

Hi Don,
Now it works, can you try again?
Thank You for your report.
Regards
Adriano
Il 14/05/2019 14:54, Don H ha scritto:
Got a update notice this morning saying that weather plus 6.3 was available.  I enered on yes and it downloaded the update but then gave a error message that a file was missing or was a incorrect format. Tried it twice with same results.






Re: weather plus 6.3

Adriano Barbieri
 

Hi Don,

Now it works, can you try again?

Thank You for your report.


Regards

Adriano


Il 14/05/2019 14:54, Don H ha scritto:
Got a update notice this morning saying that weather plus 6.3 was available.  I enered on yes and it downloaded the update but then gave a error message that a file was missing or was a incorrect format.  Tried it twice with same results.







Re: weather plus 6.3

Rui Fontes
 

Same here...

Rui Fontes


Às 13:54 de 14/05/2019, Don H escreveu:

Got a update notice this morning saying that weather plus 6.3 was available.  I enered on yes and it downloaded the update but then gave a error message that a file was missing or was a incorrect format.  Tried it twice with same results.


weather plus 6.3

Don H
 

Got a update notice this morning saying that weather plus 6.3 was available.  I enered on yes and it downloaded the update but then gave a error message that a file was missing or was a incorrect format.  Tried it twice with same results.


Re: Where exactly does the virtual cursor start off in browse mode?

Gene
 

Are these pages you have visited before?  Although I haven't specifically kept track of this, my recollection is that, on a page you have never     visited, it starts at the top of the page consistently.  On pages you have visited before, I believe it starts where you last were on the page during that session.  I don't think that is remembered if you close and reopen the browser but I'd have to experiment and see. 
 
There are specific pages where JAVA script is used to place you in a specific place, such as the search edit field on the Google home page, but I don't think you are asking about a circumstance like that.
 
Gene

----- Original Message -----
From: Felix G.
Sent: Tuesday, May 14, 2019 4:26 AM
Subject: [nvda] Where exactly does the virtual cursor start off in browse mode?

Hi,
I've been wondering about this for some time now, so I finally decided to ask:
When I follow a link, where exactly, technically, is the virtual
cursor supposed to start off on the new page? About half of the time I
find it at the beginning, but sometimes it seems it's placed randomly
in the middle of a list of links or even down near the bottom. Please
note we're not talking about ajax or anything. I'm referring to real
page refreshes.
Now before I cry bug, I'd like to know: What exactly is the expected
behavior? Could anyone please provide an authoritative response, or
share their own experience with this?
The background is that I may soon be testing just how well a certain
web app works with NVDA, and so I should know all there is to know
about browse mode to the letter.
All the best,
Felix



Where exactly does the virtual cursor start off in browse mode?

Felix G.
 

Hi,
I've been wondering about this for some time now, so I finally decided to ask:
When I follow a link, where exactly, technically, is the virtual
cursor supposed to start off on the new page? About half of the time I
find it at the beginning, but sometimes it seems it's placed randomly
in the middle of a list of links or even down near the bottom. Please
note we're not talking about ajax or anything. I'm referring to real
page refreshes.
Now before I cry bug, I'd like to know: What exactly is the expected
behavior? Could anyone please provide an authoritative response, or
share their own experience with this?
The background is that I may soon be testing just how well a certain
web app works with NVDA, and so I should know all there is to know
about browse mode to the letter.
All the best,
Felix


Re: Routing Speech

Shaun Oliver
 

that, is in your general settings and has been there for several iterations of NVDA. in fact, it is the first tick box, or if you like, the second tab option in that particular dialog.

hth


On 14/05/2019 13:39, Gene wrote:
Also, there is a setting in NVDA settings, though I'm not sure where it is in the newer interface, to control whether NVFDA saves current settings as permanent when you shut it down.  I recommend turning this setting off so that you must use a command, such as control NVDA key c to save the current configuration if you want it to be permanent.  You may change reading speed, punctuation verbosity, or other settings, not intending them to be permanent.  The default setting will save those settings if you shut down NVDA while those settings are still in force. 
 
Gene
----- Original Message -----
Sent: Monday, May 13, 2019 11:00 PM
Subject: Re: [nvda] Routing Speech

just to add to both posts that I've thoroughly read thus far, you can do it in vairly short order by doing the following.

NVDA+Control+S, this brings up the synthesiser dialog. select the synth you want, or, if you already have it, leave it alone. press alt+D and this will bring you to the output combo box. set that to the desired output, then simply press enter to ok and apply the change.


If you're happy with this and you want it to be a permanent fixture, pressing NVDA+Control+C will save that configuration, so you don't have to keep changing it every time.


If, however, this is a temperary change, not saving that configuration as your default is the right way to go, and pressing NVDA+Control+R will reload your default configuration.


I hope this is of use to you.


On 14/05/2019 09:25, Nimer Jaber wrote:
Hello,

Thank you for asking your question.

I think you may be looking for a setting in the synths settings which is called "output device". To access this setting,
1. press NVDA+n to access the NVDA menu, down arrow to preferences and press enter.
2. Press enter on settings.
3. Press down arrow to speech.
4. Press tab to "change" to change synthesizer settings, and press enter.
5. Press tab to find the "output mode". and press down arrow to change it.
6. Once done, press enter twice to confirm the changes, or alternatively tab to the "okay" button.

by the way, the relevant section discussing this feature in the NVDA user guide is 11.1.3.

thanks.

On Mon, May 13, 2019 at 4:39 PM Victor Marques <therealvictormarques@...> wrote:
Hello,


I'm new, and forgive me if this has already been answered, but I
couldn't find information on this.


I would like to route NVDA speech output to a particular sound card or
audio device, not through the main Windows sound system. This can be
done in JAWS using the Sound Card Utility.


Is there something similar for NVDA, or an add-on?


Thanks and please forgive my novice question.


Victor







--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!


Re: Routing Speech

Gene
 

Also, there is a setting in NVDA settings, though I'm not sure where it is in the newer interface, to control whether NVFDA saves current settings as permanent when you shut it down.  I recommend turning this setting off so that you must use a command, such as control NVDA key c to save the current configuration if you want it to be permanent.  You may change reading speed, punctuation verbosity, or other settings, not intending them to be permanent.  The default setting will save those settings if you shut down NVDA while those settings are still in force. 
 
Gene

----- Original Message -----
Sent: Monday, May 13, 2019 11:00 PM
Subject: Re: [nvda] Routing Speech

just to add to both posts that I've thoroughly read thus far, you can do it in vairly short order by doing the following.

NVDA+Control+S, this brings up the synthesiser dialog. select the synth you want, or, if you already have it, leave it alone. press alt+D and this will bring you to the output combo box. set that to the desired output, then simply press enter to ok and apply the change.


If you're happy with this and you want it to be a permanent fixture, pressing NVDA+Control+C will save that configuration, so you don't have to keep changing it every time.


If, however, this is a temperary change, not saving that configuration as your default is the right way to go, and pressing NVDA+Control+R will reload your default configuration.


I hope this is of use to you.


On 14/05/2019 09:25, Nimer Jaber wrote:
Hello,

Thank you for asking your question.

I think you may be looking for a setting in the synths settings which is called "output device". To access this setting,
1. press NVDA+n to access the NVDA menu, down arrow to preferences and press enter.
2. Press enter on settings.
3. Press down arrow to speech.
4. Press tab to "change" to change synthesizer settings, and press enter.
5. Press tab to find the "output mode". and press down arrow to change it.
6. Once done, press enter twice to confirm the changes, or alternatively tab to the "okay" button.

by the way, the relevant section discussing this feature in the NVDA user guide is 11.1.3.

thanks.

On Mon, May 13, 2019 at 4:39 PM Victor Marques <therealvictormarques@...> wrote:
Hello,


I'm new, and forgive me if this has already been answered, but I
couldn't find information on this.


I would like to route NVDA speech output to a particular sound card or
audio device, not through the main Windows sound system. This can be
done in JAWS using the Sound Card Utility.


Is there something similar for NVDA, or an add-on?


Thanks and please forgive my novice question.


Victor







--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!


Re: Routing Speech

Shaun Oliver
 

just to add to both posts that I've thoroughly read thus far, you can do it in vairly short order by doing the following.

NVDA+Control+S, this brings up the synthesiser dialog. select the synth you want, or, if you already have it, leave it alone. press alt+D and this will bring you to the output combo box. set that to the desired output, then simply press enter to ok and apply the change.


If you're happy with this and you want it to be a permanent fixture, pressing NVDA+Control+C will save that configuration, so you don't have to keep changing it every time.


If, however, this is a temperary change, not saving that configuration as your default is the right way to go, and pressing NVDA+Control+R will reload your default configuration.


I hope this is of use to you.


On 14/05/2019 09:25, Nimer Jaber wrote:
Hello,

Thank you for asking your question.

I think you may be looking for a setting in the synths settings which is called "output device". To access this setting,
1. press NVDA+n to access the NVDA menu, down arrow to preferences and press enter.
2. Press enter on settings.
3. Press down arrow to speech.
4. Press tab to "change" to change synthesizer settings, and press enter.
5. Press tab to find the "output mode". and press down arrow to change it.
6. Once done, press enter twice to confirm the changes, or alternatively tab to the "okay" button.

by the way, the relevant section discussing this feature in the NVDA user guide is 11.1.3.

thanks.

On Mon, May 13, 2019 at 4:39 PM Victor Marques <therealvictormarques@...> wrote:
Hello,


I'm new, and forgive me if this has already been answered, but I
couldn't find information on this.


I would like to route NVDA speech output to a particular sound card or
audio device, not through the main Windows sound system. This can be
done in JAWS using the Sound Card Utility.


Is there something similar for NVDA, or an add-on?


Thanks and please forgive my novice question.


Victor







--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!


Re: does NVDA work with netbook laptops?

Kerryn Gunness
 


yes NVDA  works with net books
 

----- Original Message -----
To: Nvda
Sent: Sunday, May 12, 2019 10:32 PM
Subject: [nvda] does NVDA work with netbook laptops?

Well, that’s pretty much my question lol, not sure what else to add.  They are windows 10 based, or at least the one I’m considering is.  So I’d assume it would work, but thought it was worth checking.  Thanks,

Ashley

 

 

Sent from Mail for Windows 10

 


Virus-free. www.avg.com


Re: Routing Speech

Nimer Jaber
 

Hello,

Thank you for asking your question.

I think you may be looking for a setting in the synths settings which is called "output device". To access this setting,
1. press NVDA+n to access the NVDA menu, down arrow to preferences and press enter.
2. Press enter on settings.
3. Press down arrow to speech.
4. Press tab to "change" to change synthesizer settings, and press enter.
5. Press tab to find the "output mode". and press down arrow to change it.
6. Once done, press enter twice to confirm the changes, or alternatively tab to the "okay" button.

by the way, the relevant section discussing this feature in the NVDA user guide is 11.1.3.

thanks.

On Mon, May 13, 2019 at 4:39 PM Victor Marques <therealvictormarques@...> wrote:
Hello,


I'm new, and forgive me if this has already been answered, but I
couldn't find information on this.


I would like to route NVDA speech output to a particular sound card or
audio device, not through the main Windows sound system. This can be
done in JAWS using the Sound Card Utility.


Is there something similar for NVDA, or an add-on?


Thanks and please forgive my novice question.


Victor







--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly. Thank
you, and have a great day!


Re: Routing Speech

Sarah k Alawami
 

I believe the key you want is nvda control s. There you can root the speech synth to where ever you need it to go.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 13 May 2019, at 16:35, Victor Marques wrote:

Hello,

I'm new, and forgive me if this has already been answered, but I couldn't find information on this.

I would like to route NVDA speech output to a particular sound card or audio device, not through the main Windows sound system. This can be done in JAWS using the Sound Card Utility.

Is there something similar for NVDA, or an add-on?

Thanks and please forgive my novice question.

Victor


Routing Speech

Victor Marques <therealvictormarques@...>
 

Hello,


I'm new, and forgive me if this has already been answered, but I couldn't find information on this.


I would like to route NVDA speech output to a particular sound card or audio device, not through the main Windows sound system. This can be done in JAWS using the Sound Card Utility.


Is there something similar for NVDA, or an add-on?


Thanks and please forgive my novice question.


Victor


Re: Say all command

Cecelia Rodriguez <cessbraille@...>
 

Insert down arrow


On May 10, 2019, at 9:50 AM, Claire Potter <claire.potter99@...> wrote:

Hello, the say all shortcut is NVDA key and the letter a.

Claire Potter
Potter's place, where technology comes to life!
www.pottersplace.me.uk
NVDA Certified Expert 2019. 


On 10 May 2019, at 14:40, farhan israk <fahim.net.2014@...> wrote:

What is nvda shortcut for say all command? Insert + b doesn't work. It opens browse mode settings.


Re: Retrieving nvda log after NVDA crashes

Tyler Spivey
 

%temp%\nvda-old.log.

On 5/13/2019 1:13 AM, Sylvie Duchateau wrote:
Hello,
I have installed NVDA 2019.1.1 with windows 10 version 1803 and Firefox 66.0.5, 64 bits.
Nearly every time I press alt+tab to Firefox, and sometimes when I use the Slack app, NVDA closes and restarts.
I tried to disable some add ons, but in order that I can find why NVDA crashes, I would like to have access to the NVDA log.
I can only find the log of the started session, after NVDA has restarted.
Can someone recall me where I can find the log for the session that crashed?
Thank you in advance
Best

Sylvie


Retrieving nvda log after NVDA crashes

Sylvie Duchateau
 

Hello,

I have installed NVDA 2019.1.1 with windows 10 version 1803 and Firefox 66.0.5, 64 bits.

Nearly every time I press alt+tab to Firefox, and sometimes when I use the Slack app, NVDA closes and restarts.

I tried to disable some add ons, but in order that I can find why NVDA crashes, I would like to have access to the NVDA log.

I can only find the log of the started session, after NVDA has restarted.

Can someone recall me where I can find the log for the session that crashed?

Thank you in advance

Best



Sylvie


NVDA Productivity bundle now available

Quentin Christensen
 

Hi everyone,

NV Access are very pleased to announce the availability of the "NVDA Productivity Bundle".

As well as the free NVDA screen reader (direct download link) and user guide, this bundle contains our popular electronic training material, plus telephone support. Included are: “Basic Training for NVDA”, “Microsoft Word with NVDA”, “Microsoft Excel with NVDA” and “Microsoft Outlook with NVDA”. Also included are 10 hours of telephone support, all at a discount on the regular cost.

Find the NVDA Productivity Bundle in the NV Access shop here: https://www.nvaccess.org/product/nvda-productivity-bundle/

Also a reminder that NDIS recipients in Australia can purchase the bundle through their funding.

Kind regards

Quentin.
--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: does NVDA work with netbook laptops?

Luke Davis
 

If it is Windows 10, I can't see why it wouldn't work.

As an aside, I have little experience with recent netbooks, but there are things like the HP Stream series of light laptops still floating around. The very moderate savings you will get from buying one of these instead of a more normal laptop, will be vastly offset by the never ending headaches you will have from having only a 32GB or 64GB SSD. Having those microscopic hard drives, which a netbook might since you don't give any further information, makes it very difficult for Windows to update itself, aside from the fact that you will be constantly running out of general storage space.
Yes there are ways around this using SD cards and USB sticks, but if your netbook has one of these tiny drives, please reconsider whether you should acquire it. The fact that these things were ever manufactured is a travesty.

Of course, if it's a netbook with a more reasonably sized drive, ignore everything I just said.:)

Luke

On Sun, 12 May 2019, Ashley Wayne wrote:

Well, that’s pretty much my question lol, not sure what else to add.  They are windows 10 based, or at least the one I’m considering is.  So I’d assume it
would work, but thought it was worth checking.  Thanks,
Ashley
 
 
Sent from Mail for Windows 10
 
[icon-envelope-tick-green-avg-v1.png]
Virus-free. www.avg.com


Re: Weather_Plus 6.2 available

Quentin Christensen
 

Thanks Joseph,

Like I said, I probably missed it earlier :) I don't tend to use add-ons too often since I'm always wanting to have a "plain" NVDA setup to test things with.

On Mon, May 13, 2019 at 9:34 AM Joseph Lee <joseph.lee22590@...> wrote:

Hi,

I and the add-ons community members removed the download link from the website after receiving many complaints about WeatherPlus 5.0 caused by web API problem. Once I get an official request to add it back in, I’ll take care of that (won’t be until Tuesday at the earliest).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Sunday, May 12, 2019 4:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus 6.2 available

 

Hi Rémy,

 

I probably wasn't paying attention, but is there a reason the Weather Plus add-on is no longer available from: https://addons.nvda-project.org/addons/Weather_Plus.en.html

 

I only noticed as a user asked me about it.

 

Quentin.

 

 

On Fri, May 10, 2019 at 10:59 PM Rémy Ruiz <remyruiz@...> wrote:

Hi,

This the new version to download:

http://www.nvda.it/files/plugin/weather_plus6.2.nvda-addon

I add only for those who still have problems, as already suggested by someone to go it:
1. press left windows key+r.
2. paste the line:
%appdata%\nvda\
3. delete the file weather.ini.
4. Press nvda+ctrl+f3 and reconfigure the add-on normally.http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon

Thanks.

Cheers.

Rémy

Le 10/05/2019 à 13:43, abdul muhamin a écrit :

Hi. The file is missing. Please fix

 

Sent from Mail for Windows 10

 

From: Rémy Ruiz
Sent: Thursday, May 9, 2019 7:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus 6.0 available

 

Hi friend Gerardo,

Put the log in debug mode to see the general option in NVDA, press the NVDA+F1 key, save this file and give it a name.log and then send the log to Adriano, you have his mail in the readme.html, or via the addon page. Thanks for your comments always useful.

Greetings.

Rémy

Le 09/05/2019 à 16:21, Gerardo Corripio a écrit :

Bravo bravo! It worked! Disregard the previous Email I’d sent a few minutes ago, about even though this morning updated to Weather Plus 6.2, it still didn’t work. Nevertheless I’d like a refresher on if this ever happens again, how would I extract the log, and send it through here? So far Weather Plus is awesome! Keep up the great work!

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Rémy Ruiz
Enviado: miércoles, 8 de mayo de 2019 11:54 a. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

 

Hi Gerardo,

Can you please download this version 6.1, is the last version available;

http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon

 

I add only for those who still have problems, as already suggested by someone to go it:
1. press left windows key+r.
2. paste the line:
%appdata%\nvda\
3. delete the file weather.ini.
4. Press nvda+ctrl+f3 and reconfigure the add-on normally.http://www.nvda.it/files/plugin/weather_plus6.1.nvda-addon
Thanks.
Rémy

Le 08/05/2019 à 02:04, Gerardo Corripio a écrit :

Nothing Works. I installed the two versions but nothing. It only makesthe sound when I go into theSeacities.Afterwards the setting is unavailable. Hope to get it fixed son!

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Adriano Barbieri via Groups.Io
Enviado: martes, 7 de mayo de 2019 04:56 p. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

 

Hi,

 

I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know

 

Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):


Hi to every one,


Note for those who were using versions 5 of Weather_Plus (Apixu API)::

The list of cities you have is not compatible with this new version, don't worry, Weather_Plus will allow you to retrieve them via the settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat commitment to include Weather_Plus in the automatic translation system and restoring the download link on the international page.


Best regards

Adriano Barbieri

 

 

 

 


 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Weather_Plus 6.0 available

Adriano Barbieri
 

Hi,


Quiet, don't lose the cities.


Regards

Adriano


Il 09/05/2019 16:12, Gerardo Corripio ha scritto:

Here at my end, WeatherPlus 6.2still no go!How would I send you guys the log? I’m using Windows10 64 with latest NVDA if the problema might arise from this fact? I’duninstall and reinstall, but would Iloos my previously-set cities if I do this?

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Richard Wells
Enviado: miércoles, 8 de mayo de 2019 09:37 a. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Weather_Plus 6.0 available

 

Adriano: I downloaded and copied in the file. The next time I started NVDA, it asked to update Weather Plus. Once that was done it allowed me to set a city. Thank you for all your hard work and please forgive me for sounding ungrateful to you. Providing trouble-shooting information feedback was no place to express my personal frustration with the add-on not working for me.

On 5/8/2019 1:31 AM, Adriano Barbieri via Groups.Io wrote:

Ah yes, the attachments do not pass, so download it:

https://www.dropbox.com/s/m399mmfgsjfyfpl/__init__.py?dl=1

overwrite the homonym file in:

%appdata%\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\

 

Regards

Adriano

 

Il 08/05/2019 07:57, Adriano Barbieri via Groups.Io ha scritto:

Hi Remi,

Last Modified 07/05/2019 22:50

Here it is attached.

 

I have to leave this afternoon, I'll be back on Monday, I can count on you? I don't have a portable PC.

 

Regards

Adriano

 

Il 08/05/2019 00:39, Rémy Ruiz ha scritto:

Hi Adriano,

If this is the name of the file, I already have it, it is the first corrective, the second corrective carries the same date.

__init__.py; 186 294; 48 099; Python File; 07/05/2019 18:46; 3D558965

Thanks for confirmation.

Rémy

Note:

Other things:

HiDoug Lee and all,
Thanks very much for your excellent explanation.
I do not use linux, I use Windows, but because the repository where Weather_Plus is located does not use the Windows convention for CRLF?
The Notepadplusplus is used for the elaboration of the readme.md files and they are encoded in UTF-8, I think that this is also used for the elaboration of the source files, if I am not mistaken all the word processor use the CRLF convention if you have Windows?
I think Zvonimir  should use this convension and not the LF convension  used by Linux seems more logical to me.
What you think?
How to avoid this in the future I do not know?
Thank you for this passionate debate.
Cheers.
Rémy

Doug Lee <nvda@...>
date  mardi 07/05/2019 à 22:29
[nvda-addons] Important note for Weather_Plus6.0 translators

English first:

Linux and Windows create text files differently: In Linux, lines end with a line-feed character, or LF. In Windows, lines end with two characters: A carriage return, or CR, followed by a line feed, LF. We commonly abbreviate these as LF and CRLF, respectively.

Zvonimir was saying that the project uses the LF convention but your files use the CRLF convention. The result is that comparing original files with your files will make it seem like you changed every line in the files. This, of course, is an accident; but it makes detecting actual code changes more difficult.

My best, with Google's help, at Spanish for the above:

Anglais en premier:

Linux et Windows créent des fichiers texte différemment: Sous Linux, les lignes se terminent par un caractère de saut de ligne, ou LF. Sous Windows, les lignes se terminent par deux caractères: un retour à la ligne, ou CR, suivi d’un saut de ligne, LF. Nous les abrégons couramment en LF et CRLF, respectivement.

Zvonimir disait que le projet utilise la convention LF mais que vos fichiers utilisent la convention CRLF. Le résultat est que la comparaison des fichiers originaux avec vos fichiers donne l'impression que vous avez changé chaque ligne des fichiers. Ceci, bien sûr, est un accident; mais cela rend plus difficile la détection des modifications de code réelles.

Mon meilleur, avec l'aide de Google, en espagnol pour ce qui précède:

On Tue, May 07, 2019 at 09:36:37PM +0200, R??my Ruiz wrote:
Hi,
A thousand apologies, I do not understand any of this I put the files as they are in the addon, which is this I'm not a programmer or anything like that, that's why I do not understand what you mean, tell Noelia to explain me in Spanish or Abdel in french, Thank you.

Cheers.
Rémy

Le 07/05/2019 à 21:24, zvonimir stanečić, 9a5dsz a écrit :
The only thing is, that the project was conferted to the clrf.
I.e line endings.
These were in lf.
Oops! Please be careful next time...

Hi
I am fork this one and i made mi changes now after read this message:

git add .

git commit -m "my message"

git push origin master

All is fine with last sources corrected by Adriano.
Thanks.
Cheers.
Rémy

 

Le 07/05/2019 à 23:55, Adriano Barbieri via Groups.Io a écrit :

Hi,

 

I have fixed 2 bugs recently.

download again, remove any Weather_Plus version and install again Weather_Plus 6.0.

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Let them know

 

Regards

Adriano

Il 07/05/2019 22:46, Jarek.Krcmar ha scritto:

Greetings,

I have problem with the Weather plus.

I could start it, Windows has seen it not anyway.

So, I have uninstalled and installed Nvda and than Weather plus.

But I can't set my town.

Where is a problem, please?

Could you help me?

Sincerely:

Jarek

Dne 07-05-2019 v 12:30 Adriano Barbieri via Groups.Io napsal(a):


Hi to every one,


Note for those who were using versions 5 of Weather_Plus (Apixu API)::

The list of cities you have is not compatible with this new version, don't worry, Weather_Plus will allow you to retrieve them via the settings window.

Changes in this version:

??? Weather Plus returns to using the Yahoo Weather API.
??? Virtually all the features of the previous version 4.8 are back and keeps the "Rename" button.

??? Now compatible also with Python 3.

??? NVDA compatibility: 2017.3 to 2019.1

Weather_Plus can update itself, however you can download it from the following page:

http://www.nvda.it/files/plugin/weather_plus6.0.nvda-addon

Thanks in advance Noelia, Remy, Abdel, and Svonimir for yoursgreat commitment to include Weather_Plus in the automatic translation system and restoring the download link on the international page.


Best regards

Adriano Barbieri




 

19421 - 19440 of 81002