Date   

StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #addonrelease

 

Hi everyone,

 

StationPlaylist add-on 19.06 (stable) and 18.09.9 (long-term) will go out to add-on users tomorrow (May 19th). These releases includes improvements for supporting SPL Encoder and Streamer, along with incorporating more changes from more recent NVDA releases.

 

Note: SPL add-on 19.06 (stable) requires Studio 5.20 and later. Add-on 18.09.9 will continue to support Studio 5.1x.

 

Cheers,

Joseph


Re: Nvda, Total Commander and its' panels

Jarek.Krcmar
 

Hi,

I have donloaded from here:

https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon

Jarek

Dne 18-05-2019 v 22:15 Mallard napsal(a):

Hello Jarek,


I didn't know there was an add-on for Total Commander and NVDA.

It would be interesting to see if it makes some parts of the ftp connection settings.

Where did you find the add-on, please?


Thaks, ciao,

Ollie




Il 18/05/2019 22:06, Jarek.Krcmar ha scritto:
greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek










Re: Nvda, Total Commander and its' panels

Mallard
 

Ah... Great. I've always used a 32-bit version, even on a 64-bit machine, because it works better with my ftp. That's why I'd always had the panels announced.


Great job the add-on, thanks.

Ciao,

Ollie

Il 18/05/2019 21:13, Ralf Kefferpuetz ha scritto:

The 32bit version does annonce it the 64bit version not.

That’s what my addon is for….

*From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Gene
*Sent:* Samstag, 18. Mai 2019 19:17
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] Nvda, Total Commander and its' panels

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison.  I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it.  Aside from that, perhaps a comparison of settings in the program might help.

Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.

I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.

Gene

----- Original Message -----

*From:*Mallard <mailto:mallard@kimabe.eu>

*Sent:*Saturday, May 18, 2019 11:59 AM

*To:*nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

*Subject:*Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it
wasn't.
When I press Nvda + T, only the Total Commander window is reported.
The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether
it will ever be implemented into Nvda by announcing panels in Total
Commander.
Regards:
Jarek





Re: Nvda, Total Commander and its' panels

Mallard
 

Thanks, sorry... I was viewing messages from the bottom up, and I hadn't seen this one.


Ciao,

Ollie

Il 18/05/2019 21:13, Ralf Kefferpuetz ha scritto:
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek








Re: Nvda, Total Commander and its' panels

Mallard
 

Hello Jarek,


I didn't know there was an add-on for Total Commander and NVDA.

It would be interesting to see if it makes some parts of the ftp connection settings.

Where did you find the add-on, please?


Thaks, ciao,

Ollie

Il 18/05/2019 22:06, Jarek.Krcmar ha scritto:
greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek









Re: Nvda, Total Commander and its' panels

Jarek.Krcmar
 

greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):

Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek







Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek


Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

Only in the 32bit version with the NVDA built-in appModule.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard
Sent: Samstag, 18. Mai 2019 19:00
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to press anything otherthan tab, to move between
one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it
wasn't.
When I press Nvda + T, only the Total Commander window is reported.
The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether
it will ever be implemented into Nvda by announcing panels in Total
Commander.
Regards:
Jarek





Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

The 32bit version does annonce it the 64bit version not.

That’s what my addon is for….

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Samstag, 18. Mai 2019 19:17
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda, Total Commander and its' panels

 

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison.  I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it.  Aside from that, perhaps a comparison of settings in the program might help.

 

Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.

 

I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.

 

Gene

----- Original Message -----

From: Mallard

Sent: Saturday, May 18, 2019 11:59 AM

Subject: Re: [nvda] Nvda, Total Commander and its' panels

 

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
> Greetings to all
> I have both Free Commander and Total Commander installed on my computer.
> I thought Nvda would announce the panels at Total Commander, but it
> wasn't.
> When I press Nvda + T, only the Total Commander window is reported.
> The Tab key does not report panels.
> So I want to ask if any of you are using Total Commander, and whether
> it will ever be implemented into Nvda by announcing panels in Total
> Commander.
> Regards:
> Jarek
>
>
>
>
>


Re: Nvda, Total Commander and its' panels

Gene
 

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison.  I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it.  Aside from that, perhaps a comparison of settings in the program might help.
 
Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.
 
I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.
 
Gene

----- Original Message -----
From: Mallard
Sent: Saturday, May 18, 2019 11:59 AM
Subject: Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
> Greetings to all
> I have both Free Commander and Total Commander installed on my computer.
> I thought Nvda would announce the panels at Total Commander, but it
> wasn't.
> When I press Nvda + T, only the Total Commander window is reported.
> The Tab key does not report panels.
> So I want to ask if any of you are using Total Commander, and whether
> it will ever be implemented into Nvda by announcing panels in Total
> Commander.
> Regards:
> Jarek
>
>
>
>
>



Re: Nvda, Total Commander and its' panels

 

It is clear that Total Commander is not exposing things to the screen reader either because it's coded "irregularly" or uses old Windows style code while NVDA is trying to keep up with more recent versions.  Like all applications that fall into this group, that means an add-on would need to be created to make it accessible.

It is not a part of the core function of NVDA to make every application that exists accessible, and that's why the multitude of add-ons exist, and one already exists.

The fact that Total Commander is just a jazzed up version of File Explorer, which will very soon be getting a tabbed version under Windows 10, makes it quite unlikely that anyone is going to devote any new effort to this at this time, but the existing one should work.

A web search on "Total Commander NVDA Add-On" turns up two pertinent topics, one on this very group and another on the freelists NVDA Add-Ons list:

https://www.freelists.org/post/nvda-addons/total-commander-and-nvda,2

https://nvda.groups.io/g/nvda/topic/24876251  

which gives the direct link to an existing NVDA Add-On called Total Commander enhanced on Github (and whose author has posted recently to one of the blind technology lists) that has been updated to work with NVDA 2019.1:  https://github.com/Novalis7747/totalcmd-enhanced

This is why doing web searches is absolutely essential, and something that should be done first, before asking anywhere.  I learned all of the above from a simple web search on "Total Commander NVDA Add-On" and looking strictly at the first six returned results, digging a bit further into the links given in the post from this group noted above.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: Nvda, Total Commander and its' panels

Mallard
 

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since 2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels, amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie

Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by announcing panels in Total Commander.
Regards:
Jarek




Nvda, Total Commander and its' panels

Jarek.Krcmar
 

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by announcing panels in Total Commander.
Regards:
Jarek


New add-on for Brother Utilities app

Rui Fontes
 

Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.


Re: waterfox alpha is out

g melconian
 

please do let us know or what waterfall hikes and waterfalls classic a z test done with nvda. I would welcome your input on the matter I do have water fox56 space on your recommendations and will not update till you say it's worth to update to the latest waterfalls classical what stocks thank you

On May 17, 2019 11:53:12 PM "Shaun Everiss" <sm.everiss@gmail.com> wrote:

Hi all.

This is not strictly an nvda issue, however I know a lot of us use this
so I thought I'd put it out.

Waterfox 68 alpha1 is out.

From inital useage the only major issue I found is that extentions
seems to not be accessible or at least none of my addons show.

I assume it uses the newer quantom inaccessible interfface sadly.

However, it appears that the older waterfox while itself will be
eventually dieing when 68.0 comes out is not going away in fact
according to the waterfox blog its going to be called waterfox classic,
and will remain being updated with security and bugfix updates when
possible, there won't be any schedual as such but both branches will be
active, its just that eventually all addons will be updated for the
alpha version.

According to the blog, there are addons updating, it stresses its the
first alpha.

I don't have any way to contact the devs directly about us screen reader
users but it would be good to well have them on board.

Unlike firefox quantom it does appear that generally things do load in
an accessible manner but there are a lot of changes under the hood.

I would encourage anyone and everyone to test this.

Its good to know that unlike firefox, all that will happen is that
waterfox will simply split in half.

Waterfox will be modernised and people will be encouraged to use the
latest and greatest.

Waterfox 56.x branch will be renamed waterfox classic and will continue
as it is till the end of time most likely.

Now I will of course see later on if I can update and see what goes and
what loads.

If classic addons work on 68 like noscript 5x or even if some of the
newer stuff is accessible I will try to see what that does.

On the other side, there will not be any reason to keep that version if
its got issues though it would be good to try to nipp as many of these
issues in the bud and I think unlike mozilla and its view on security
and accessibility software the people behind waterfox won't be so stupid
over it.




Re: Bug in Office 2010?

Adriani Botez
 

And please also report on which Windows version you tested.

 

Thanks

Adriani

 

 

Von: adriani.botez@... <adriani.botez@...>
Gesendet: Samstag, 18. Mai 2019 10:24
An: nvda@nvda.groups.io
Betreff: Bug in Office 2010?

 

Dear all,

 

could someone please test if following is reproducible in Office 2010?

 

  1. With NVDA running, open an Excel sheet.
  2. Press alt,followed by f, followed by a

 

What should happen: NVDA should read the save as dialog which appears on the screen.

 

What seems to happen: NVDA does not read the save as dialog and you have to press alt+tab twice. After that, NVDA reports it correctly.

 

 

Thanks and best regards

Adriani

 

 

 


Bug in Office 2010?

Adriani Botez
 

Dear all,

 

could someone please test if following is reproducible in Office 2010?

 

  1. With NVDA running, open an Excel sheet.
  2. Press alt,followed by f, followed by a

 

What should happen: NVDA should read the save as dialog which appears on the screen.

 

What seems to happen: NVDA does not read the save as dialog and you have to press alt+tab twice. After that, NVDA reports it correctly.

 

 

Thanks and best regards

Adriani

 

 

 


Re: Code Factory Eloquence won’t load

Sile
 

If the point about the VPN is really true, this is ridiculous. I use Matlab all the time and it can manage this even when a VPN is running.



Sile

On May 17, 2019, at 9:55 PM, Ron Canazzi <aa2vm@roadrunner.com> wrote:

If you are using a VPN, Eloquence/Vocalizer bundle can't phone home to verify your valid license.


On 5/17/2019 10:35 AM, Ed Marquette wrote:
All:
Tell me if I should address this to Code Factory.
About a week ago, I downloaded and commenced using the Code Factory Eloquence (and Vocalizer bundle).
On Monday of this week, I bought the product and received a license code. I downloaded the program and entered the license key when prompted.
I had to adjust speed, pitch, and so forth, but all was well after that.
I shut down my laptop, took it home, and fired it up again at home, using the firm’s VPN.
Today, I get E-Speak. From the Synthesizer menu, I get “Cannot load Code Factory Synthesizer” or something very close.
This could be wrong, but it is almost as if NVDA thinks I’m still using the demo version. Any ideas?
By the way, in the NVDA menu, under Code Factory menu choice, I simply go in a circle and never get to the voice adjustments — as I did yesterday .


--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"




Re: Code Factory Eloquence won’t load

Sile
 

I had a similar issue, and had to contact coat factory and have them re-issue my license key.

Sile

On May 17, 2019, at 10:35 AM, Ed Marquette <marquette.ed@gmail.com> wrote:

All:
Tell me if I should address this to Code Factory.
About a week ago, I downloaded and commenced using the Code Factory Eloquence (and Vocalizer bundle).
On Monday of this week, I bought the product and received a license code. I downloaded the program and entered the license key when prompted.
I had to adjust speed, pitch, and so forth, but all was well after that.
I shut down my laptop, took it home, and fired it up again at home, using the firm’s VPN.
Today, I get E-Speak. From the Synthesizer menu, I get “Cannot load Code Factory Synthesizer” or something very close.
This could be wrong, but it is almost as if NVDA thinks I’m still using the demo version. Any ideas?
By the way, in the NVDA menu, under Code Factory menu choice, I simply go in a circle and never get to the voice adjustments — as I did yesterday .



waterfox alpha is out

 

Hi all.

This is not strictly an nvda issue, however I know a lot of us use this so I thought I'd put it out.

Waterfox 68 alpha1 is out.

From inital useage the only major issue I found is that extentions seems to not be accessible or at least none of my addons show.

I assume it uses the newer quantom inaccessible interfface sadly.

However, it appears that the older waterfox while itself will be eventually dieing when 68.0 comes out is not going away in fact according to the waterfox blog its going to be called waterfox classic, and will remain being updated with security and bugfix updates when possible, there won't be any schedual as such but both branches will be active, its just that eventually all addons will be updated for the alpha version.

According to the blog, there are addons updating, it stresses its the first alpha.

I don't have any way to contact the devs directly about us screen reader users but it would be good to well have them on board.

Unlike firefox quantom it does appear that generally things do load in an accessible manner but there are a lot of changes under the hood.

I would encourage anyone and everyone to test this.

Its good to know that unlike firefox, all that will happen is that waterfox will simply split in half.

Waterfox will be modernised and people will be encouraged to use the latest and greatest.

Waterfox 56.x branch will be renamed waterfox classic and will continue as it is till the end of time most likely.

Now I will of course see later on if I can update and see what goes and what loads.

If classic addons work on 68 like noscript 5x or even if some of the newer stuff is accessible I will try to see what that does.

On the other side, there will not be any reason to keep that version if its got issues though it would be good to try to nipp as many of these issues in the bud and I think unlike mozilla and its view on security and accessibility software the people behind waterfox won't be so stupid over it.