Date   

Re: FW: Notes on NVDA and PowerPoint

Sukil Etxenike <sukiletxe@...>
 

Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back between pannels. And S and D (or was it A and S) also work to go to the previous and next slide in the slideshow.
Regards,
Sukil

El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió:

Hi,

 

I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let me know what you think of these notes. Have you any improvements to suggest?

 

I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc.

 

Notes on the use of PowerPoint with NVDA

 

1. File opens in slide view

2. Page Down moves from slide to slide showing the title pane

 

For the first slide:

3. Press tab to move to the title placeholder. NVDA reads the title of the slide;

4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle;

5. Press tab again to move to the embedded graphic. NVDA  says "Graphic" if no alt text;

6. Press tab again to move to rectangle shape.

7. Press tab again to return to the title placeholder at the top of the slide

 

Press page down For the second slide:

8. Press tab to move to the title placeholder

9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder

10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line

11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not been filled in.

 

Press page down for the third slide

12. Press tab for the Title placeholder

13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above

 

 

Press pagedown for slide 4;

Same as slide 3.

 

Press page down for slide 5

15. Press tab for footer placeholder. NVDA reads all text in the footer;

16. Press tab for slide number placeholder. NVDA reads out the number of the slide;

17. Press tab for title placeholder

18. Press tab for text placeholder.

19. Press tab to return to the footer placeholder.

 

control+home jumps to the first slide

control+end jumps to the last slide.

 

The Slide Show

 

Press F5 to start the slide show

NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide.

1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key presses to allow the slide show to catch up;

2. Press numpad 9 and numpad 7 to read the contents of the slide line by line.

3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below.

4. Type the  number  of a slide followed by return to jump to that slide.

5. Press control-shift-s to switch back and forth between the slide and its accompanying notes.

6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through the options available in each of these panes. Use F6 to move to the chosen view to see the results.

7. Use the escape key to exit the slide show.

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 

 

From: Cearbhall O'Meadhra [mailto:cearbhall.omeadhra@...]
Sent: Saturday, July 9, 2016 12:08 PM
To: 'nvda@nvda.groups.io'
Subject: RE: NVDA and PowerPoint

 

Hi again,

 

I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC.

 

All advice welcome, thanks!

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Cearbhall O'Meadhra
Sent: Saturday, July 9, 2016 11:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA and PowerPoint

 

Hi,

 

I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 



Re: free CD-burning program that will work well with NVDA

Rosemarie Chavarria
 

Thank you. I'll check it out.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby
Sent: Saturday, July 09, 2016 1:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA

Well I have quite a fiew. One of the programs I use a lot is any burn. and
I also used express burn butt you have to pay for that one. If I were you I
would stick with any burn because it is free. You can get this soft ware at
www.anyburn.com <http://www.anyburn.com> . Hope this helps





On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote:


Hi, everyone,



I've been trying to burn a CD for a friend with windows 10 but I'm
finding it very complicated. What is a good free CD-burning program that
will work well with NVDA?



Thanks for your help in advance.



Rosemarie


Re: free CD-burning program that will work well with NVDA

Bobby <bvinton@...>
 

Well I have quite a fiew.  One of the programs I use a lot is any burn.  and I also used express burn butt you have to pay for that one.  If I were you I would stick with any burn because it is free.  You can get this soft ware at www.anyburn.com.  Hope this helps



On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote:

Hi, everyone,

 

I've been trying to burn a CD for a friend with windows 10 but I'm finding it very complicated. What is a good free CD-burning program that will work well with NVDA?

 

Thanks for your help in advance.

 

Rosemarie



free CD-burning program that will work well with NVDA

Rosemarie Chavarria
 

Hi, everyone,

 

I've been trying to burn a CD for a friend with windows 10 but I'm finding it very complicated. What is a good free CD-burning program that will work well with NVDA?

 

Thanks for your help in advance.

 

Rosemarie


Re: brousers that speak the progress bars when downloading

Kenny Dog <hurrikennyandopo@...>
 

Hi


If the download manager is used I think it is in internet explorer, mozilla fire fox google play and maybe more when you start downloading the files you can use the CTRL key + the letter J to bring up your downloads. You might have to tab around or in some cases where the files are up up and down to see what each file is up to. So i do not hear them all at times I will just turn off the progress bars thingy in NVDA with the nvda key + the letter U.

The download manager can usually be found under the tools section in the browsers.




hope this helps.


Gene nz



On 10/07/2016 5:04 AM, n8mnx@... wrote:

    I am looking for a brouser that nvda will speak the progress bar when I down load I use to use webie but today it no longer works even after I uninstalled and reinstalled it. I really want to hear the progress bar when I download to know if my downloads anre working or not.

Brian Sackrider


On 7/9/2016 1:00 PM, Richard Turner wrote:

Hello,

I just joined this group.

I am primarily a Window-Eyes user.

I’d like to learn to use NVDA more efficiently.

Is there a way to have NVDA speak the number of unread messages in a given folder?  Maybe an addon?

 

I’ve not found anything yet.

 

Thanks,

Richard

 





Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: Reviewing the screen with the mouse keys

Richard Turner <richardturner42@...>
 

Thanks,

One of the other folks pointed me to the user guide, which has gotten me on the right path.

I will go and get the tutorial.

Richard

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, July 9, 2016 12:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reviewing the screen with the mouse keys

 

I would recommend that you go through the very highly thought of tutorial available on this site. It appears to me that you can download the specific sections you are interested in or I believe you can download the whole thing. I haven't listened to the tutorial.  I can't tell you exactly what you should download just to learn about this subject.  If looking at the links is unclear, ask here.  But if you know very little about NVDA, you should probably listen to more sections.    

 

Your question would require a tutorial length answer to be properly answered which is why I'm referring you to the tutorial.  if you don't understand aspects covered in the tutorial, ask here. 

 

Gene

Sent: Saturday, July 09, 2016 12:54 PM

Subject: [nvda] Reviewing the screen with the mouse keys

 

I can’t figure out how to review the screen using the mouse cursor with the numpad keys.  Is that possible with NVDA?

 

Richard

 


Re: Reviewing the screen with the mouse keys

Gene
 

I would recommend that you go through the very highly thought of tutorial available on this site. It appears to me that you can download the specific sections you are interested in or I believe you can download the whole thing. I haven't listened to the tutorial.  I can't tell you exactly what you should download just to learn about this subject.  If looking at the links is unclear, ask here.  But if you know very little about NVDA, you should probably listen to more sections.    
 
Your question would require a tutorial length answer to be properly answered which is why I'm referring you to the tutorial.  if you don't understand aspects covered in the tutorial, ask here. 
 
Gene

Sent: Saturday, July 09, 2016 12:54 PM
Subject: [nvda] Reviewing the screen with the mouse keys

I can’t figure out how to review the screen using the mouse cursor with the numpad keys.  Is that possible with NVDA?

 

Richard

 


Re: Outlook 2016 and NVDA

Richard Turner <richardturner42@...>
 

No,

I wanted the count of unread messages in the folder and his answer works perfectly.

Yes, sometimes that is also in the status line, but shift tabbing to the folder name reads the number of unread messages.  Then, as you arrow up or down through the folder list it will read the number of unread messages in each folder.

 

Thanks for the status line command, that will come in handy for some other applications.

 

Richard

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, July 9, 2016 12:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Outlook 2016 and NVDA

 

The person asking the question appears to want to know how to read the status line,  Status lines are becoming increasingly less common in programs.  I have no idea if current versions of Outlook have one.  If your version does and if it is one that NVDA can recognize, the command is NVDA key end.

 

Gene

----- Original Message -----

Sent: Saturday, July 09, 2016 12:38 PM

Subject: Re: [nvda] Outlook 2016 and NVDA

 

When you’re in the message list, shift tab once.  You should hear the name of the folder you’re in and the number of messages it contains.

 

HTH

 

Dan

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 09, 2016 1:00 PM
To: nvda@nvda.groups.io
Subject: [nvda] Outlook 2016 and NVDA

 

Hello,

I just joined this group.

I am primarily a Window-Eyes user.

I’d like to learn to use NVDA more efficiently.

Is there a way to have NVDA speak the number of unread messages in a given folder?  Maybe an addon?

 

I’ve not found anything yet.

 

Thanks,

Richard

 


Re: Outlook 2016 and NVDA

Gene
 

The person asking the question appears to want to know how to read the status line,  Status lines are becoming increasingly less common in programs.  I have no idea if current versions of Outlook have one.  If your version does and if it is one that NVDA can recognize, the command is NVDA key end.
 
Gene

----- Original Message -----
Sent: Saturday, July 09, 2016 12:38 PM
Subject: Re: [nvda] Outlook 2016 and NVDA

When you’re in the message list, shift tab once.  You should hear the name of the folder you’re in and the number of messages it contains.

 

HTH

 

Dan

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 09, 2016 1:00 PM
To: nvda@nvda.groups.io
Subject: [nvda] Outlook 2016 and NVDA

 

Hello,

I just joined this group.

I am primarily a Window-Eyes user.

I’d like to learn to use NVDA more efficiently.

Is there a way to have NVDA speak the number of unread messages in a given folder?  Maybe an addon?

 

I’ve not found anything yet.

 

Thanks,

Richard

 


Re: brousers that speak the progress bars when downloading

Gene
 

I don't know which browsers NVDA speaks the progress bars of for downloads.  But in my opinion, overreliance on progress bars is often the result of not being properly familiar with the program being used.  I'm not saying that to criticize you or anyone else.  I am stating a general conclusion that I believe is valid. In firefox, for example, during a download, issuing the command control j opens a library window where a list of previous downloads is displayed.  The first one in the list is the current download.  using the read current line command, numpad 8 in the desktop layout will give you information such as the speed of the download, the percent downloaded the estimated time to completion, and perhaps other information I don't now recall.  Leave that Window opened.  Then return to it and check from time to time if you want to see current information.  Others may be able to tell you how to see the progress bar in various browsers.
 
But my point is that there is often other ways to get information.  Also, there may be an add on in Firefox that will notify you when a download completes.  Others will have to discuss that.
 
Gene

----- Original Message -----
From: n8mnx@...
Sent: Saturday, July 09, 2016 12:04 PM
Subject: [nvda] brousers that speak the progress bars when downloading

    I am looking for a brouser that nvda will speak the progress bar when I down load I use to use webie but today it no longer works even after I uninstalled and reinstalled it. I really want to hear the progress bar when I download to know if my downloads anre working or not.

Brian Sackrider


On 7/9/2016 1:00 PM, Richard Turner wrote:

Hello,

I just joined this group.

I am primarily a Window-Eyes user.

I’d like to learn to use NVDA more efficiently.

Is there a way to have NVDA speak the number of unread messages in a given folder?  Maybe an addon?

 

I’ve not found anything yet.

 

Thanks,

Richard

 





Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Message status

Richard Turner <richardturner42@...>
 

In Outlook 2016, NVDA reads if a message is unread.   It does not say it it is replied to, forwarded, or read.

Anyway to at least get replied and forwarded announced?

 

Richard

 


Is there a quick way of switching between the chosen table and 8-dot Braille?

John J. Boyer
 

This would be very convenient for programmers.

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.


FW: Notes on NVDA and PowerPoint

Cearbhall O'Meadhra
 

Hi,

 

I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let me know what you think of these notes. Have you any improvements to suggest?

 

I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc.

 

Notes on the use of PowerPoint with NVDA

 

1. File opens in slide view

2. Page Down moves from slide to slide showing the title pane

 

For the first slide:

3. Press tab to move to the title placeholder. NVDA reads the title of the slide;

4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle;

5. Press tab again to move to the embedded graphic. NVDA  says "Graphic" if no alt text;

6. Press tab again to move to rectangle shape.

7. Press tab again to return to the title placeholder at the top of the slide

 

Press page down For the second slide:

8. Press tab to move to the title placeholder

9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder

10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line

11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not been filled in.

 

Press page down for the third slide

12. Press tab for the Title placeholder

13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above

 

 

Press pagedown for slide 4;

Same as slide 3.

 

Press page down for slide 5

15. Press tab for footer placeholder. NVDA reads all text in the footer;

16. Press tab for slide number placeholder. NVDA reads out the number of the slide;

17. Press tab for title placeholder

18. Press tab for text placeholder.

19. Press tab to return to the footer placeholder.

 

control+home jumps to the first slide

control+end jumps to the last slide.

 

The Slide Show

 

Press F5 to start the slide show

NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide.

1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key presses to allow the slide show to catch up;

2. Press numpad 9 and numpad 7 to read the contents of the slide line by line.

3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below.

4. Type the  number  of a slide followed by return to jump to that slide.

5. Press control-shift-s to switch back and forth between the slide and its accompanying notes.

6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through the options available in each of these panes. Use F6 to move to the chosen view to see the results.

7. Use the escape key to exit the slide show.

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 

 

From: Cearbhall O'Meadhra [mailto:cearbhall.omeadhra@...]
Sent: Saturday, July 9, 2016 12:08 PM
To: 'nvda@nvda.groups.io'
Subject: RE: NVDA and PowerPoint

 

Hi again,

 

I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC.

 

All advice welcome, thanks!

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Cearbhall O'Meadhra
Sent: Saturday, July 9, 2016 11:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA and PowerPoint

 

Hi,

 

I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


Re: Indicating Python indentation in Braille

John J. Boyer
 

It would be much more intuitive if each level of indentation was shown
as a non-blank cell. Such cells are quicker and easier to count.

John

On Sat, Jul 09, 2016 at 11:03:09AM -0700, Joseph Lee wrote:
Hi,
Each indentation is shown as blank cell.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of John J.
Boyer
Sent: Saturday, July 9, 2016 10:59 AM
To: nvda@nvda.groups.io
Subject: [nvda] Indicating Python indentation in Braille

Is there a way to display a single-cell dot pattern for each level of
indentation in Python? It must be Braille, not speech, since I am
deaf-blind.

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.





--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.


Re: Reviewing the screen with the mouse keys

Kevin Chao
 

PLease have look at flat review and object navigation in NVDA user guide :)
Third option is speak text under mouse pointer, where you can move mouse around to explore screen content.

On Sat, Jul 9, 2016 at 10:54 AM Richard Turner <richardturner42@...> wrote:

I can’t figure out how to review the screen using the mouse cursor with the numpad keys.  Is that possible with NVDA?

 

Richard

 


Re: Indicating Python indentation in Braille

 

Hi,
Each indentation is shown as blank cell.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of John J.
Boyer
Sent: Saturday, July 9, 2016 10:59 AM
To: nvda@nvda.groups.io
Subject: [nvda] Indicating Python indentation in Braille

Is there a way to display a single-cell dot pattern for each level of
indentation in Python? It must be Braille, not speech, since I am
deaf-blind.

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.


Indicating Python indentation in Braille

John J. Boyer
 

Is there a way to display a single-cell dot pattern for each level of
indentation in Python? It must be Braille, not speech, since I am
deaf-blind.

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.


Reviewing the screen with the mouse keys

Richard Turner <richardturner42@...>
 

I can’t figure out how to review the screen using the mouse cursor with the numpad keys.  Is that possible with NVDA?

 

Richard

 


Re: NVDA and pizza sites

Danni
 

I complained once to pizza hut and they promptly put a link on their site for visually impaired users to use their mobile site for ordering but last time I tried ordering online which was a while ago it was not user friendly any more sadly!

I did attempt using papajohns.com the other day and it did seem to work pretty well so if that 1 is in your area it's worth trying!

----- Original Message -----
From: "David Mehler" <dave.mehler@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 08, 2016 8:14 PM
Subject: Re: [nvda] NVDA and pizza sites


Hello,

Unfortunately that's my perceptions so far as well. I would have hoped
that prominent businesses would not be doing this as it alienates
customers but there you go.

Dave.


On 7/8/16, Brian's Mail list account <bglists@blueyonder.co.uk> wrote:
It really needs more info, as I'm sure these sites vary a lot. I have in the

past heard that some of these sights are using flash a lot and pictures with

no tagging etc, instead of words and proper native html fields.
I'd have hoped by now, this was a couple of years ago, they might have made

their sites accessible though. Not into this myself I have to say. Awash
just asked by a friend to have a poke about and it was utter rubbish for the

blind.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "David Mehler" <dave.mehler@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, July 06, 2016 9:15 AM
Subject: [nvda] NVDA and pizza sites


Hello,

My apologies if this is a repeat message. I sent t his to another list
and didn't get very much.

Is anyone using NVDA with online food ordering sites? In particular
online pizza ordering sites, dominos.com and pizzahut.com? I'm
particularly wanting to do custom ordering, but this really doesn't
work.

Thanks.
Dave.






Re: brousers that speak the progress bars when downloading

Danni
 

On i/e once you start a download then click the alt key go to downloads or view downloads it will update the progress almost to the point of annoying lol
 
----- Original Message -----
From: n8mnx@...
Sent: Saturday, July 09, 2016 10:04 AM
Subject: [nvda] brousers that speak the progress bars when downloading

    I am looking for a brouser that nvda will speak the progress bar when I down load I use to use webie but today it no longer works even after I uninstalled and reinstalled it. I really want to hear the progress bar when I download to know if my downloads anre working or not.

Brian Sackrider


On 7/9/2016 1:00 PM, Richard Turner wrote:

Hello,

I just joined this group.

I am primarily a Window-Eyes user.

I’d like to learn to use NVDA more efficiently.

Is there a way to have NVDA speak the number of unread messages in a given folder?  Maybe an addon?

I’ve not found anything yet.

Thanks,

Richard





Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Virus-free. www.avast.com