|
Re: FW: Notes on NVDA and PowerPoint
F6 will move between the current slide, the status bar, and the thumbnail preview panes when in slide view. F6 will not do this in presentation mode. Thanks, Mike
Sent from my iPhone, please forgive the typos.
On Jul 9, 2016, at 5:09 PM, Cearbhall O'Meadhra < cearbhall.omeadhra@...> wrote: Sukil, I appreciate your taking the trouble to respond. However, I have tried control and F6, etc., as you suggest but they have no function in slide view or slide show modes. Lidewise, “s” and “d” or “a” have no function. Are these possibly JAWS commands? I see that JAWS uses a rake of navigation keystrokes for PowerPoint. However, I am trying to assemble a tutorial for using NVDA with PowerPoint. All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back between pannels. And S and D (or was it A and S) also work to go to the previous and next slide in the slideshow. Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió: Hi, I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let me know what you think of these notes. Have you any improvements to suggest? I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc. Notes on the use of PowerPoint with NVDA 1. File opens in slide view 2. Page Down moves from slide to slide showing the title pane For the first slide: 3. Press tab to move to the title placeholder. NVDA reads the title of the slide; 4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle; 5. Press tab again to move to the embedded graphic. NVDA says "Graphic" if no alt text; 6. Press tab again to move to rectangle shape. 7. Press tab again to return to the title placeholder at the top of the slide Press page down For the second slide: 8. Press tab to move to the title placeholder 9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder 10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line 11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not been filled in. Press page down for the third slide 12. Press tab for the Title placeholder 13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above Press pagedown for slide 4; Same as slide 3. Press page down for slide 5 15. Press tab for footer placeholder. NVDA reads all text in the footer; 16. Press tab for slide number placeholder. NVDA reads out the number of the slide; 17. Press tab for title placeholder 18. Press tab for text placeholder. 19. Press tab to return to the footer placeholder. control+home jumps to the first slide control+end jumps to the last slide. The Slide Show Press F5 to start the slide show NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide. 1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key presses to allow the slide show to catch up; 2. Press numpad 9 and numpad 7 to read the contents of the slide line by line. 3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below. 4. Type the number of a slide followed by return to jump to that slide. 5. Press control-shift-s to switch back and forth between the slide and its accompanying notes. 6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through the options available in each of these panes. Use F6 to move to the chosen view to see the results. 7. Use the escape key to exit the slide show. I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi again, I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC. All advice welcome, thanks! All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi, I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Sukil Can you list the objects that NVDA does not read? I would be happy to include them in my investigation. All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Sukil Etxenike via Groups.io
Sent: Saturday, July 9, 2016 9:59 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Notes on NVDA and PowerPoint Hi, Me too. And some tables and I believe other objects as well are not even read by NVDA. I should research that behaviour. Regards, Sukil El 09/07/2016 a las 22:56, Mike Sedmak escribió: Has anyone had luck navigating tables in powerpoint? Table navigation does not work for me in powerpoint. I have to resort to using tab to step through every cell.
Thanks, Sent from my iPhone, please forgive the typos. Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back between pannels. And S and D (or was it A and S) also work to go to the previous and next slide in the slideshow. Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió: Hi, I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let me know what you think of these notes. Have you any improvements to suggest? I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc. Notes on the use of PowerPoint with NVDA 1. File opens in slide view 2. Page Down moves from slide to slide showing the title pane For the first slide: 3. Press tab to move to the title placeholder. NVDA reads the title of the slide; 4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle; 5. Press tab again to move to the embedded graphic. NVDA says "Graphic" if no alt text; 6. Press tab again to move to rectangle shape. 7. Press tab again to return to the title placeholder at the top of the slide Press page down For the second slide: 8. Press tab to move to the title placeholder 9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder 10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line 11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not been filled in. Press page down for the third slide 12. Press tab for the Title placeholder 13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above Press pagedown for slide 4; Same as slide 3. Press page down for slide 5 15. Press tab for footer placeholder. NVDA reads all text in the footer; 16. Press tab for slide number placeholder. NVDA reads out the number of the slide; 17. Press tab for title placeholder 18. Press tab for text placeholder. 19. Press tab to return to the footer placeholder. control+home jumps to the first slide control+end jumps to the last slide. The Slide Show Press F5 to start the slide show NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide. 1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key presses to allow the slide show to catch up; 2. Press numpad 9 and numpad 7 to read the contents of the slide line by line. 3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below. 4. Type the number of a slide followed by return to jump to that slide. 5. Press control-shift-s to switch back and forth between the slide and its accompanying notes. 6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through the options available in each of these panes. Use F6 to move to the chosen view to see the results. 7. Use the escape key to exit the slide show. I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi again, I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC. All advice welcome, thanks! All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi, I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Mike, Would you like to send me a sample PowerPoint file with a table in one of the slides? I would like to get on top of this as well. I would be happy to share any results that I find. All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Mike Sedmak
Sent: Saturday, July 9, 2016 9:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Notes on NVDA and PowerPoint Has anyone had luck navigating tables in powerpoint? Table navigation does not work for me in powerpoint. I have to resort to using tab to step through every cell.
Thanks, Sent from my iPhone, please forgive the typos. Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back between pannels. And S and D (or was it A and S) also work to go to the previous and next slide in the slideshow. Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió: Hi, I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let me know what you think of these notes. Have you any improvements to suggest? I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc. Notes on the use of PowerPoint with NVDA 1. File opens in slide view 2. Page Down moves from slide to slide showing the title pane For the first slide: 3. Press tab to move to the title placeholder. NVDA reads the title of the slide; 4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle; 5. Press tab again to move to the embedded graphic. NVDA says "Graphic" if no alt text; 6. Press tab again to move to rectangle shape. 7. Press tab again to return to the title placeholder at the top of the slide Press page down For the second slide: 8. Press tab to move to the title placeholder 9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder 10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line 11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not been filled in. Press page down for the third slide 12. Press tab for the Title placeholder 13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above Press pagedown for slide 4; Same as slide 3. Press page down for slide 5 15. Press tab for footer placeholder. NVDA reads all text in the footer; 16. Press tab for slide number placeholder. NVDA reads out the number of the slide; 17. Press tab for title placeholder 18. Press tab for text placeholder. 19. Press tab to return to the footer placeholder. control+home jumps to the first slide control+end jumps to the last slide. The Slide Show Press F5 to start the slide show NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide. 1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key presses to allow the slide show to catch up; 2. Press numpad 9 and numpad 7 to read the contents of the slide line by line. 3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below. 4. Type the number of a slide followed by return to jump to that slide. 5. Press control-shift-s to switch back and forth between the slide and its accompanying notes. 6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through the options available in each of these panes. Use F6 to move to the chosen view to see the results. 7. Use the escape key to exit the slide show. I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi again, I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC. All advice welcome, thanks! All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi, I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?
|
|
|
Re: free CD-burning program that will work well with NVDA
Sukil Etxenike <sukiletxe@...>
Hi,
Use the menu bar to do the tasks, and flat review and object navigation to view some information onscreen.
Regards,
Sukil
toggle quoted messageShow quoted text
El 10/07/2016 a las 1:02, Roger Stewart escribió: I tried Imburn and it doesn't seem to be very accessible. I tab around and nothing speaks for me at all but sighted friend says that there are icons on there that you click on with the mouse to do various tasks with it. Seems very simple to use for a sighted mouse user, but for nvda users, doesn't seem to be very promising unless maybe an add on could be made to make it usable.
Roger
On 7/9/2016 4:31 PM, Chris wrote:
Another one is imgburn
http://www.imgburn.com/
Also available as a ninite installer
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Damien
Pendleton
Sent: 09 July 2016 21:56
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA
Hi,
Another really good one that I use regularly is CDBurner XP. The title was
misleading at first, it led me to believe that it was only built for Windows
XP - this is not the case. I have used it with Windows 7 with absolutely no
problems whatsoever, and it is still being maintained.
This one is at http://cdburnerxp.se/en
Hope this helps.
Kind regards,
Damien.
-----Original Message-----
From: Rosemarie Chavarria
Sent: Saturday, July 09, 2016 9:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA
Thank you. I'll check it out.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby
Sent: Saturday, July 09, 2016 1:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA
Well I have quite a fiew. One of the programs I use a lot is any burn. and
I also used express burn butt you have to pay for that one. If I were you I
would stick with any burn because it is free. You can get this soft ware at
www.anyburn.com <http://www.anyburn.com> . Hope this helps
On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote:
Hi, everyone,
I've been trying to burn a CD for a friend with windows 10 but I'm finding
it very complicated. What is a good free CD-burning program that will work
well with NVDA?
Thanks for your help in advance.
Rosemarie
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Sukil, I appreciate your taking the trouble to respond. However, I have tried control and F6, etc., as you suggest but they have no function in slide view or slide show modes. Lidewise, “s” and “d” or “a” have no function. Are these possibly JAWS commands? I see that JAWS uses a rake of navigation keystrokes for PowerPoint. However, I am trying to assemble a tutorial for using NVDA with PowerPoint. All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Sukil Etxenike via Groups.io
Sent: Saturday, July 9, 2016 9:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Notes on NVDA and PowerPoint Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back between pannels. And S and D (or was it A and S) also work to go to the previous and next slide in the slideshow. Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió: Hi, I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let me know what you think of these notes. Have you any improvements to suggest? I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc. Notes on the use of PowerPoint with NVDA 1. File opens in slide view 2. Page Down moves from slide to slide showing the title pane For the first slide: 3. Press tab to move to the title placeholder. NVDA reads the title of the slide; 4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle; 5. Press tab again to move to the embedded graphic. NVDA says "Graphic" if no alt text; 6. Press tab again to move to rectangle shape. 7. Press tab again to return to the title placeholder at the top of the slide Press page down For the second slide: 8. Press tab to move to the title placeholder 9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder 10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line 11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not been filled in. Press page down for the third slide 12. Press tab for the Title placeholder 13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above Press pagedown for slide 4; Same as slide 3. Press page down for slide 5 15. Press tab for footer placeholder. NVDA reads all text in the footer; 16. Press tab for slide number placeholder. NVDA reads out the number of the slide; 17. Press tab for title placeholder 18. Press tab for text placeholder. 19. Press tab to return to the footer placeholder. control+home jumps to the first slide control+end jumps to the last slide. The Slide Show Press F5 to start the slide show NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide. 1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key presses to allow the slide show to catch up; 2. Press numpad 9 and numpad 7 to read the contents of the slide line by line. 3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below. 4. Type the number of a slide followed by return to jump to that slide. 5. Press control-shift-s to switch back and forth between the slide and its accompanying notes. 6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through the options available in each of these panes. Use F6 to move to the chosen view to see the results. 7. Use the escape key to exit the slide show. I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi again, I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC. All advice welcome, thanks! All the best, Cearbhall m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@... I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now! Hi, I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?
|
|
|
Re: free CD-burning program that will work well with NVDA
I tried Imburn and it doesn't seem to be very accessible. I tab around and nothing speaks for me at all but sighted friend says that there are icons on there that you click on with the mouse to do various tasks with it. Seems very simple to use for a sighted mouse user, but for nvda users, doesn't seem to be very promising unless maybe an add on could be made to make it usable.
Roger
toggle quoted messageShow quoted text
On 7/9/2016 4:31 PM, Chris wrote: Another one is imgburn
http://www.imgburn.com/
Also available as a ninite installer
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Damien
Pendleton
Sent: 09 July 2016 21:56
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA
Hi,
Another really good one that I use regularly is CDBurner XP. The title was
misleading at first, it led me to believe that it was only built for Windows
XP - this is not the case. I have used it with Windows 7 with absolutely no
problems whatsoever, and it is still being maintained.
This one is at http://cdburnerxp.se/en
Hope this helps.
Kind regards,
Damien.
-----Original Message-----
From: Rosemarie Chavarria
Sent: Saturday, July 09, 2016 9:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA
Thank you. I'll check it out.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby
Sent: Saturday, July 09, 2016 1:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] free CD-burning program that will work well with NVDA
Well I have quite a fiew. One of the programs I use a lot is any burn. and
I also used express burn butt you have to pay for that one. If I were you I
would stick with any burn because it is free. You can get this soft ware at
www.anyburn.com <http://www.anyburn.com> . Hope this helps
On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote:
Hi, everyone,
I've been trying to burn a CD for a friend with windows 10 but I'm finding
it very complicated. What is a good free CD-burning program that will work
well with NVDA?
Thanks for your help in advance.
Rosemarie
|
|
|
Re: free CD-burning program that will work well with NVDA
toggle quoted messageShow quoted text
-----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Damien Pendleton Sent: 09 July 2016 21:56 To: nvda@nvda.groups.io Subject: Re: [nvda] free CD-burning program that will work well with NVDA Hi, Another really good one that I use regularly is CDBurner XP. The title was misleading at first, it led me to believe that it was only built for Windows XP - this is not the case. I have used it with Windows 7 with absolutely no problems whatsoever, and it is still being maintained. This one is at http://cdburnerxp.se/enHope this helps. Kind regards, Damien. -----Original Message----- From: Rosemarie Chavarria Sent: Saturday, July 09, 2016 9:45 PM To: nvda@nvda.groups.io Subject: Re: [nvda] free CD-burning program that will work well with NVDA Thank you. I'll check it out. -----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby Sent: Saturday, July 09, 2016 1:48 PM To: nvda@nvda.groups.io Subject: Re: [nvda] free CD-burning program that will work well with NVDA Well I have quite a fiew. One of the programs I use a lot is any burn. and I also used express burn butt you have to pay for that one. If I were you I would stick with any burn because it is free. You can get this soft ware at www.anyburn.com < http://www.anyburn.com> . Hope this helps On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote: Hi, everyone, I've been trying to burn a CD for a friend with windows 10 but I'm finding it very complicated. What is a good free CD-burning program that will work well with NVDA? Thanks for your help in advance. Rosemarie
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Kenny Dog <hurrikennyandopo@...>
Hi Cearbhall
The closest I have got is all the shortcuts for powerpoint that can be used. I think they are for powerpoint 2010 and 2013.
The commands you gave can they be used the same on a desktop pc? as well or are these laptop ones.
I played around with powerpoint a while ago when it was first supported but that is as far as i went.
Would you mind if these directions are also put up on a website on how to use powerpoint?
Gene nz
On 10/07/2016 6:36 AM, Cearbhall O'Meadhra wrote:
Hi,
I have been working all day on this topic and have put together the following notes about using PowerPoint with NVDA. Please let
me know what you think of these notes. Have you any improvements to suggest?
I have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on my Desktop Pc.
Notes on the use of PowerPoint with NVDA
1. File opens in slide view
2. Page Down moves from slide to slide showing the title pane
For the first slide:
3. Press tab to move to the title placeholder. NVDA reads the title of the slide;
4. Press tab again to move to the subtitle placeholder. NVDA reads the subtitle;
5. Press tab again to move to the embedded graphic. NVDA says "Graphic" if no alt text;
6. Press tab again to move to rectangle shape.
7. Press tab again to return to the title placeholder at the top of the slide
Press page down For the second slide:
8. Press tab to move to the title placeholder
9. Press tab to go to the text placeholder. NVDA reads all the text in the placeholder
10. Press numpad 9 and numbpad 7 to read the text in the placeholder line by line
11. Press tab to move to the graphic image. NVDA reports the location of the graphic in the computer when the alt text has not
been filled in.
Press page down for the third slide
12. Press tab for the Title placeholder
13. Press tab for the object placeholder. NVDA reads all the text as in the text placeholder at 9 above
Press pagedown for slide 4;
Same as slide 3.
Press page down for slide 5
15. Press tab for footer placeholder. NVDA reads all text in the footer;
16. Press tab for slide number placeholder. NVDA reads out the number of the slide;
17. Press tab for title placeholder
18. Press tab for text placeholder.
19. Press tab to return to the footer placeholder.
control+home jumps to the first slide
control+end jumps to the last slide.
The Slide Show
Press F5 to start the slide show
NVDA reads the whole slide from top to bottom including the title and leaves the cursor at the bottom of the slide.
1. Press page down and page up to move from slide to slide. Note that it may be necessary to wait for a few seconds between key
presses to allow the slide show to catch up;
2. Press numpad 9 and numpad 7 to read the contents of the slide line by line.
3. Press return or space bar to move to the next slide. Sometimes nothing happens and then do the instruction at 4 below.
4. Type the number of a slide followed by return to jump to that slide.
5. Press control-shift-s to switch back and forth between the slide and its accompanying notes.
6. Use F6 to move between the status bar pane, slide view pane, thumbnails pane and notes pane. Use the arrow keys to move through
the options available in each of these panes. Use F6 to move to the chosen view to see the results.
7. Use the escape key to exit the slide show.
I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try
Spam Reader for free now!
Hi again,
I am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on a desktop PC.
All advice welcome, thanks!
All the best,
Cearbhall
m +353 (0)833323487 Ph: _353 (0)1-2864623 e:
cearbhall.omeadhra@...
I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try
Spam Reader for free
now!
Hi,
I have taken on a new project in which I have to be able to read several PowerPoint presentations. Are there any guides for using PowerPoint with NVDA? Can anyone give me any pointers from their own experience?
--
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Sukil Etxenike <sukiletxe@...>
Hi,
Me too. And some tables and I believe other objects as well are
not even read by NVDA. I should research that behaviour.
Regards,
Sukil
toggle quoted messageShow quoted text
El 09/07/2016 a las 22:56, Mike Sedmak
escribió:
Has anyone had luck navigating tables in powerpoint? Table
navigation does not work for me in powerpoint.
I have to resort to using tab to step
through every cell.
Thanks,
Mike
Sent from my iPhone, please forgive the typos.
Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and
back between pannels. And S and D (or was it A and S) also
work to go to the previous and next slide in the slideshow.
Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió:
Hi,
I
have been working all day on this topic and have put
together the following notes about using PowerPoint
with NVDA. Please let me know what you think of these
notes. Have you any improvements to suggest?
I
have used PowerPoint 2010 on Windows 10 using NVDA
2016.2 on my Desktop Pc.
Notes
on the use of PowerPoint with NVDA
1.
File opens in slide view
2.
Page Down moves from slide to slide showing the title
pane
For
the first slide:
3.
Press tab to move to the title placeholder. NVDA reads
the title of the slide;
4.
Press tab again to move to the subtitle placeholder.
NVDA reads the subtitle;
5.
Press tab again to move to the embedded graphic. NVDA
says "Graphic" if no alt text;
6.
Press tab again to move to rectangle shape.
7.
Press tab again to return to the title placeholder at
the top of the slide
Press
page down For the second slide:
8.
Press tab to move to the title placeholder
9.
Press tab to go to the text placeholder. NVDA reads
all the text in the placeholder
10.
Press numpad 9 and numbpad 7 to read the text in the
placeholder line by line
11.
Press tab to move to the graphic image. NVDA reports
the location of the graphic in the computer when the
alt text has not been filled in.
Press
page down for the third slide
12.
Press tab for the Title placeholder
13.
Press tab for the object placeholder. NVDA reads all
the text as in the text placeholder at 9 above
Press
pagedown for slide 4;
Same
as slide 3.
Press
page down for slide 5
15.
Press tab for footer placeholder. NVDA reads all text
in the footer;
16.
Press tab for slide number placeholder. NVDA reads out
the number of the slide;
17.
Press tab for title placeholder
18.
Press tab for text placeholder.
19.
Press tab to return to the footer placeholder.
control+home
jumps to the first slide
control+end
jumps to the last slide.
The
Slide Show
Press
F5 to start the slide show
NVDA
reads the whole slide from top to bottom including the
title and leaves the cursor at the bottom of the
slide.
1.
Press page down and page up to move from slide to
slide. Note that it may be necessary to wait for a few
seconds between key presses to allow the slide show to
catch up;
2.
Press numpad 9 and numpad 7 to read the contents of
the slide line by line.
3.
Press return or space bar to move to the next slide.
Sometimes nothing happens and then do the instruction
at 4 below.
4.
Type the number of a slide followed by return to
jump to that slide.
5.
Press control-shift-s to switch back and forth between
the slide and its accompanying notes.
6.
Use F6 to move between the status bar pane, slide view
pane, thumbnails pane and notes pane. Use the arrow
keys to move through the options available in each of
these panes. Use F6 to move to the chosen view to see
the results.
7.
Use the escape key to exit the slide show.
I
use the free version of Spam Reader to get rid of
spam. The Professional version doesn't have this
disclaimer in outgoing emails. Try Spam
Reader for free now!
Hi
again,
I
am using PowerPoint 2010 with NVDA 2016.2 and Windows
10 on a desktop PC.
All
advice welcome, thanks!
All
the best,
Cearbhall
m
+353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...
I
use the free version of Spam Reader to get rid of
spam. The Professional version doesn't have this
disclaimer in outgoing emails. Try Spam
Reader
for free now!
Hi,
I have taken on a new project in
which I have to be able to read several PowerPoint
presentations. Are there any guides for using PowerPoint
with NVDA? Can anyone give me any pointers from their
own experience?
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Has anyone had luck navigating tables in powerpoint? Table navigation does not work for me in powerpoint. I have to resort to using tab to step through every cell. Thanks, Mike
Sent from my iPhone, please forgive the typos.
On Jul 9, 2016, at 2:52 PM, Sukil Etxenike via Groups.io < sukiletxe@...> wrote:
Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back
between pannels. And S and D (or was it A and S) also work to go to
the previous and next slide in the slideshow.
Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió:
Hi,
I
have been working all day on this topic and have put
together the following notes about using PowerPoint with
NVDA. Please let me know what you think of these notes. Have
you any improvements to suggest?
I
have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on
my Desktop Pc.
Notes
on the use of PowerPoint with NVDA
1.
File opens in slide view
2.
Page Down moves from slide to slide showing the title pane
For
the first slide:
3.
Press tab to move to the title placeholder. NVDA reads the
title of the slide;
4.
Press tab again to move to the subtitle placeholder. NVDA
reads the subtitle;
5.
Press tab again to move to the embedded graphic. NVDA says
"Graphic" if no alt text;
6.
Press tab again to move to rectangle shape.
7.
Press tab again to return to the title placeholder at the
top of the slide
Press
page down For the second slide:
8.
Press tab to move to the title placeholder
9.
Press tab to go to the text placeholder. NVDA reads all the
text in the placeholder
10.
Press numpad 9 and numbpad 7 to read the text in the
placeholder line by line
11.
Press tab to move to the graphic image. NVDA reports the
location of the graphic in the computer when the alt text
has not been filled in.
Press
page down for the third slide
12.
Press tab for the Title placeholder
13.
Press tab for the object placeholder. NVDA reads all the
text as in the text placeholder at 9 above
Press
pagedown for slide 4;
Same
as slide 3.
Press
page down for slide 5
15.
Press tab for footer placeholder. NVDA reads all text in the
footer;
16.
Press tab for slide number placeholder. NVDA reads out the
number of the slide;
17.
Press tab for title placeholder
18.
Press tab for text placeholder.
19.
Press tab to return to the footer placeholder.
control+home
jumps to the first slide
control+end
jumps to the last slide.
The
Slide Show
Press
F5 to start the slide show
NVDA
reads the whole slide from top to bottom including the title
and leaves the cursor at the bottom of the slide.
1.
Press page down and page up to move from slide to slide.
Note that it may be necessary to wait for a few seconds
between key presses to allow the slide show to catch up;
2.
Press numpad 9 and numpad 7 to read the contents of the
slide line by line.
3.
Press return or space bar to move to the next slide.
Sometimes nothing happens and then do the instruction at 4
below.
4.
Type the number of a slide followed by return to jump to
that slide.
5.
Press control-shift-s to switch back and forth between the
slide and its accompanying notes.
6.
Use F6 to move between the status bar pane, slide view pane,
thumbnails pane and notes pane. Use the arrow keys to move
through the options available in each of these panes. Use F6
to move to the chosen view to see the results.
7.
Use the escape key to exit the slide show.
I
use the free version of Spam Reader to get rid of spam.
The Professional version doesn't have this disclaimer in
outgoing emails. Try Spam
Reader for free now!
Hi
again,
I
am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on
a desktop PC.
All
advice welcome, thanks!
All the
best,
Cearbhall
m +353
(0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...
I
use the free version of Spam Reader to get rid of spam.
The Professional version doesn't have this disclaimer in
outgoing emails. Try Spam
Reader
for free now!
Hi,
I have taken on a new project in which I
have to be able to read several PowerPoint presentations. Are
there any guides for using PowerPoint with NVDA? Can anyone
give me any pointers from their own experience?
|
|
|
Re: free CD-burning program that will work well with NVDA
Damien Sykes-Lindley <damien@...>
Hi, Another really good one that I use regularly is CDBurner XP. The title was misleading at first, it led me to believe that it was only built for Windows XP - this is not the case. I have used it with Windows 7 with absolutely no problems whatsoever, and it is still being maintained. This one is at http://cdburnerxp.se/enHope this helps. Kind regards, Damien.
-----Original Message----- From: Rosemarie Chavarria Sent: Saturday, July 09, 2016 9:45 PM To: nvda@nvda.groups.io Subject: Re: [nvda] free CD-burning program that will work well with NVDA Thank you. I'll check it out. -----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby Sent: Saturday, July 09, 2016 1:48 PM To: nvda@nvda.groups.io Subject: Re: [nvda] free CD-burning program that will work well with NVDA Well I have quite a fiew. One of the programs I use a lot is any burn. and I also used express burn butt you have to pay for that one. If I were you I would stick with any burn because it is free. You can get this soft ware at www.anyburn.com < http://www.anyburn.com> . Hope this helps On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote: Hi, everyone, I've been trying to burn a CD for a friend with windows 10 but I'm finding it very complicated. What is a good free CD-burning program that will work well with NVDA? Thanks for your help in advance. Rosemarie
|
|
|
Re: FW: Notes on NVDA and PowerPoint
Sukil Etxenike <sukiletxe@...>
Hi,
You can also press ctrl+F6 or ctrl+shift+F6 to move forth and back
between pannels. And S and D (or was it A and S) also work to go to
the previous and next slide in the slideshow.
Regards,
Sukil
El 09/07/2016 a las 20:36, Cearbhall O'Meadhra escribió:
Hi,
I
have been working all day on this topic and have put
together the following notes about using PowerPoint with
NVDA. Please let me know what you think of these notes. Have
you any improvements to suggest?
I
have used PowerPoint 2010 on Windows 10 using NVDA 2016.2 on
my Desktop Pc.
Notes
on the use of PowerPoint with NVDA
1.
File opens in slide view
2.
Page Down moves from slide to slide showing the title pane
For
the first slide:
3.
Press tab to move to the title placeholder. NVDA reads the
title of the slide;
4.
Press tab again to move to the subtitle placeholder. NVDA
reads the subtitle;
5.
Press tab again to move to the embedded graphic. NVDA says
"Graphic" if no alt text;
6.
Press tab again to move to rectangle shape.
7.
Press tab again to return to the title placeholder at the
top of the slide
Press
page down For the second slide:
8.
Press tab to move to the title placeholder
9.
Press tab to go to the text placeholder. NVDA reads all the
text in the placeholder
10.
Press numpad 9 and numbpad 7 to read the text in the
placeholder line by line
11.
Press tab to move to the graphic image. NVDA reports the
location of the graphic in the computer when the alt text
has not been filled in.
Press
page down for the third slide
12.
Press tab for the Title placeholder
13.
Press tab for the object placeholder. NVDA reads all the
text as in the text placeholder at 9 above
Press
pagedown for slide 4;
Same
as slide 3.
Press
page down for slide 5
15.
Press tab for footer placeholder. NVDA reads all text in the
footer;
16.
Press tab for slide number placeholder. NVDA reads out the
number of the slide;
17.
Press tab for title placeholder
18.
Press tab for text placeholder.
19.
Press tab to return to the footer placeholder.
control+home
jumps to the first slide
control+end
jumps to the last slide.
The
Slide Show
Press
F5 to start the slide show
NVDA
reads the whole slide from top to bottom including the title
and leaves the cursor at the bottom of the slide.
1.
Press page down and page up to move from slide to slide.
Note that it may be necessary to wait for a few seconds
between key presses to allow the slide show to catch up;
2.
Press numpad 9 and numpad 7 to read the contents of the
slide line by line.
3.
Press return or space bar to move to the next slide.
Sometimes nothing happens and then do the instruction at 4
below.
4.
Type the number of a slide followed by return to jump to
that slide.
5.
Press control-shift-s to switch back and forth between the
slide and its accompanying notes.
6.
Use F6 to move between the status bar pane, slide view pane,
thumbnails pane and notes pane. Use the arrow keys to move
through the options available in each of these panes. Use F6
to move to the chosen view to see the results.
7.
Use the escape key to exit the slide show.
I
use the free version of Spam Reader to get rid of spam.
The Professional version doesn't have this disclaimer in
outgoing emails. Try Spam
Reader for free now!
Hi
again,
I
am using PowerPoint 2010 with NVDA 2016.2 and Windows 10 on
a desktop PC.
All
advice welcome, thanks!
All the
best,
Cearbhall
m +353
(0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...
I
use the free version of Spam Reader to get rid of spam.
The Professional version doesn't have this disclaimer in
outgoing emails. Try Spam
Reader
for free now!
Hi,
I have taken on a new project in which I
have to be able to read several PowerPoint presentations. Are
there any guides for using PowerPoint with NVDA? Can anyone
give me any pointers from their own experience?
|
|
|
Re: free CD-burning program that will work well with NVDA
Thank you. I'll check it out.
toggle quoted messageShow quoted text
-----Original Message----- From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby Sent: Saturday, July 09, 2016 1:48 PM To: nvda@nvda.groups.io Subject: Re: [nvda] free CD-burning program that will work well with NVDA Well I have quite a fiew. One of the programs I use a lot is any burn. and I also used express burn butt you have to pay for that one. If I were you I would stick with any burn because it is free. You can get this soft ware at www.anyburn.com < http://www.anyburn.com> . Hope this helps On 7/9/2016 4:33 PM, Rosemarie Chavarria wrote: Hi, everyone, I've been trying to burn a CD for a friend with windows 10 but I'm finding it very complicated. What is a good free CD-burning program that will work well with NVDA? Thanks for your help in advance. Rosemarie
|
|
|
Re: free CD-burning program that will work well with NVDA
Well I have quite a fiew. One of the programs I use a lot is any
burn. and I also used express burn butt you have to pay for that
one. If I were you I would stick with any burn because it is
free. You can get this soft ware at www.anyburn.com. Hope this
helps
toggle quoted messageShow quoted text
On 7/9/2016 4:33 PM, Rosemarie
Chavarria wrote:
Hi, everyone,
I've been trying to burn a CD for a friend
with windows 10 but I'm finding it very complicated. What is a
good free CD-burning program that will work well with NVDA?
Thanks for your help in advance.
Rosemarie
|
|
|
free CD-burning program that will work well with NVDA
Hi, everyone, I've been trying to burn a CD for a friend with windows 10 but I'm finding it very complicated. What is a good free CD-burning program that will work well with NVDA? Thanks for your help in advance. Rosemarie
|
|
|
Re: brousers that speak the progress bars when downloading
Kenny Dog <hurrikennyandopo@...>
Hi
If the download manager is used I think it is in internet explorer, mozilla fire fox google play and maybe more when you start downloading the files you can use the CTRL key + the letter J to bring up your downloads. You might have to tab around or in some
cases where the files are up up and down to see what each file is up to. So i do not hear them all at times I will just turn off the progress bars thingy in NVDA with the nvda key + the letter U.
The download manager can usually be found under the tools section in the browsers.
hope this helps.
Gene nz
I am looking for a brouser that nvda will speak the progress bar when I down load I use to use webie but today it no longer works even after I uninstalled and reinstalled it. I really want to hear the progress bar when I download to know if my downloads
anre working or not.
Brian Sackrider
On 7/9/2016 1:00 PM, Richard Turner wrote:
Hello,
I just joined this group.
I am primarily a Window-Eyes user.
I’d like to learn to use NVDA more efficiently.
Is there a way to have NVDA speak the number of unread messages in a given folder? Maybe an addon?
I’ve not found anything yet.
Thanks,
Richard
|
This email has been checked for viruses by Avast antivirus software.
www.avast.com
|
--
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net
|
|
|
Re: Reviewing the screen with the mouse keys
Richard Turner <richardturner42@...>
Thanks, One of the other folks pointed me to the user guide, which has gotten me on the right path. I will go and get the tutorial. Richard
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene Sent: Saturday, July 9, 2016 12:45 PM To: nvda@nvda.groups.io Subject: Re: [nvda] Reviewing the screen with the mouse keys I would recommend that you go through the very highly thought of tutorial available on this site. It appears to me that you can download the specific sections you are interested in or I believe you can download the whole thing. I haven't listened to the tutorial. I can't tell you exactly what you should download just to learn about this subject. If looking at the links is unclear, ask here. But if you know very little about NVDA, you should probably listen to more sections. Your question would require a tutorial length answer to be properly answered which is why I'm referring you to the tutorial. if you don't understand aspects covered in the tutorial, ask here. Sent: Saturday, July 09, 2016 12:54 PM Subject: [nvda] Reviewing the screen with the mouse keys I can’t figure out how to review the screen using the mouse cursor with the numpad keys. Is that possible with NVDA? Richard
|
|
|
Re: Reviewing the screen with the mouse keys
I would recommend that you go through the very
highly thought of tutorial available on this site. It appears to me that
you can download the specific sections you are interested in or I believe you
can download the whole thing. I haven't listened to the tutorial. I
can't tell you exactly what you should download just to learn about this
subject. If looking at the links is unclear, ask here. But if you
know very little about NVDA, you should probably listen to more sections.
Your question would require a tutorial length
answer to be properly answered which is why I'm referring you to the
tutorial. if you don't understand aspects covered in the tutorial, ask
here.
Gene
toggle quoted messageShow quoted text
Sent: Saturday, July 09, 2016 12:54 PM
Subject: [nvda] Reviewing the screen with the mouse
keys
I can’t
figure out how to review the screen using the mouse cursor with the numpad
keys. Is that possible with NVDA?
Richard
|
|
|
Re: Outlook 2016 and NVDA
Richard Turner <richardturner42@...>
No, I wanted the count of unread messages in the folder and his answer works perfectly. Yes, sometimes that is also in the status line, but shift tabbing to the folder name reads the number of unread messages. Then, as you arrow up or down through the folder list it will read the number of unread messages in each folder. Thanks for the status line command, that will come in handy for some other applications. Richard
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene Sent: Saturday, July 9, 2016 12:30 PM To: nvda@nvda.groups.io Subject: Re: [nvda] Outlook 2016 and NVDA The person asking the question appears to want to know how to read the status line, Status lines are becoming increasingly less common in programs. I have no idea if current versions of Outlook have one. If your version does and if it is one that NVDA can recognize, the command is NVDA key end. ----- Original Message ----- Sent: Saturday, July 09, 2016 12:38 PM Subject: Re: [nvda] Outlook 2016 and NVDA When you’re in the message list, shift tab once. You should hear the name of the folder you’re in and the number of messages it contains. HTH Dan Hello, I just joined this group. I am primarily a Window-Eyes user. I’d like to learn to use NVDA more efficiently. Is there a way to have NVDA speak the number of unread messages in a given folder? Maybe an addon? I’ve not found anything yet. Thanks, Richard
|
|
|
Re: Outlook 2016 and NVDA
The person asking the question appears to want to
know how to read the status line, Status lines are becoming increasingly
less common in programs. I have no idea if current versions of Outlook
have one. If your version does and if it is one that NVDA can recognize,
the command is NVDA key end.
Gene
toggle quoted messageShow quoted text
----- Original Message -----
Sent: Saturday, July 09, 2016 12:38 PM
Subject: Re: [nvda] Outlook 2016 and NVDA
When you’re in the message list, shift tab once. You
should hear the name of the folder you’re in and the number of messages it
contains.
HTH
Dan
Hello,
I just
joined this group.
I am
primarily a Window-Eyes user.
I’d like
to learn to use NVDA more efficiently.
Is there a
way to have NVDA speak the number of unread messages in a given folder?
Maybe an addon?
I’ve not
found anything yet.
Thanks,
Richard
|
|
|
