Date   

Re: nvdaremote on a windows vps

mattias
 

only a low beep


Den 2019-05-28 kl. 20:29, skrev luke scholey:

Sorry, I was talking about hosting my own remote server when talking about the firewall - I wasn't clear there.

With the addon, you can have any machine that the addon is installed on act as a remote gateway. I'll just point out that there's no need to do this, the nvdaremote.com server is fine, that's just my setup. Have you read the documentation on the nvdaremote.com site? Do you hear the beeps that indicate a successful connection?
Luke

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mattias
Sent: 28 May 2019 18:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvdaremote on a windows vps

nvdaremote addon dont have a local server

or?

i thinked if you use the nvdaremoet.com you dont need to setup firewall rules?

Den 2019-05-28 kl. 19:03, skrev luke scholey:
I didn’t use nvdaremlote.com, I just had the local server host the remote service. I’d need a few more details, your set up of firewalls for example, if you wanted any further help with this. If nobody else has any comments you could email me off list so we’re not cluttering it up.


Luke

On 28 May 2019, at 17:41, mattias <mjonsson1986@gmail.com> wrote:

luke if you have it working

how do you do?

i have do as follow

as host in both win10 and server 2016:

nvdaremote.com

and set a key

try to connect from win10 to nvdaremote.com and entered my key

and press f12 to send keys to the vps

nothing


Den 2019-05-28 kl. 18:27, skrev luke scholey:
Yes, works perfectly
Luke

On 28 May 2019, at 17:24, mattias <mjonsson1986@gmail.com> wrote:

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway








Re: nvdaremote on a windows vps

luke scholey
 

Sorry, I was talking about hosting my own remote server when talking about the firewall - I wasn't clear there.

With the addon, you can have any machine that the addon is installed on act as a remote gateway. I'll just point out that there's no need to do this, the nvdaremote.com server is fine, that's just my setup. Have you read the documentation on the nvdaremote.com site? Do you hear the beeps that indicate a successful connection?
Luke

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mattias
Sent: 28 May 2019 18:40
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvdaremote on a windows vps

nvdaremote addon dont have a local server

or?

i thinked if you use the nvdaremoet.com you dont need to setup firewall rules?

Den 2019-05-28 kl. 19:03, skrev luke scholey:
I didn’t use nvdaremlote.com, I just had the local server host the remote service. I’d need a few more details, your set up of firewalls for example, if you wanted any further help with this. If nobody else has any comments you could email me off list so we’re not cluttering it up.


Luke

On 28 May 2019, at 17:41, mattias <mjonsson1986@gmail.com> wrote:

luke if you have it working

how do you do?

i have do as follow

as host in both win10 and server 2016:

nvdaremote.com

and set a key

try to connect from win10 to nvdaremote.com and entered my key

and press f12 to send keys to the vps

nothing


Den 2019-05-28 kl. 18:27, skrev luke scholey:
Yes, works perfectly
Luke

On 28 May 2019, at 17:24, mattias <mjonsson1986@gmail.com> wrote:

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway






Re: Getting your Windows Version

Giles Turnbull
 

related to this, any time info such as version numbers is required, I start up NVDA's speach viewer (in the tools menu) so whatever is spoken aloud can be copied and pasted from the speech viewer window.

That means you don't have to try and remember a string of numbers, or navigate the dialog box with object navigation to listen to it again, and it will print NVDA's version number in the correct format rather than the date format, even if that's what your NVDA voice synth is speaking (mine says "January 1st 2019" but the speech window records it as "Version: 2019 .1 . ... I've put additional spaces before the decimal points to stop it being spoken in date format).

And the same works with the winver dialog :)

Giles
")


Re: nvdaremote on a windows vps

mattias
 

nvdaremote addon dont have a local server

or?

i thinked if you use the nvdaremoet.com you dont need to setup firewall rules?

Den 2019-05-28 kl. 19:03, skrev luke scholey:

I didn’t use nvdaremlote.com, I just had the local server host the remote service. I’d need a few more details, your set up of firewalls for example, if you wanted any further help with this. If nobody else has any comments you could email me off list so we’re not cluttering it up.


Luke

On 28 May 2019, at 17:41, mattias <mjonsson1986@gmail.com> wrote:

luke if you have it working

how do you do?

i have do as follow

as host in both win10 and server 2016:

nvdaremote.com

and set a key

try to connect from win10 to nvdaremote.com and entered my key

and press f12 to send keys to the vps

nothing


Den 2019-05-28 kl. 18:27, skrev luke scholey:
Yes, works perfectly
Luke

On 28 May 2019, at 17:24, mattias <mjonsson1986@gmail.com> wrote:

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway





Re: nvdaremote on a windows vps

luke scholey
 

I didn’t use nvdaremlote.com, I just had the local server host the remote service. I’d need a few more details, your set up of firewalls for example, if you wanted any further help with this. If nobody else has any comments you could email me off list so we’re not cluttering it up.


Luke

On 28 May 2019, at 17:41, mattias <mjonsson1986@gmail.com> wrote:

luke if you have it working

how do you do?

i have do as follow

as host in both win10 and server 2016:

nvdaremote.com

and set a key

try to connect from win10 to nvdaremote.com and entered my key

and press f12 to send keys to the vps

nothing


Den 2019-05-28 kl. 18:27, skrev luke scholey:
Yes, works perfectly
Luke

On 28 May 2019, at 17:24, mattias <mjonsson1986@gmail.com> wrote:

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway






Re: Query about Gmail using chrome with NVDA

 

Pretty much exactly like you create it, and I'm presuming we're not talking about a Gmail system label like Inbox, Sent, Chat, etc., which can be hidden, but not deleted.

Once you're in Settings, Labels then use screen reader search to find the Create new label button.  This is positioned in the label table just above the entries for user created labels. Then I start navigating down the first column of the table until I hit the label I'm interested in (one could search for it, too).  Once I'm on that label's line, I navigate across the columns until I hit the "Remove" action, which deletes the label when activated.

Removing a label does not delete any messages to which the label is assigned.  You would have to do that first, before removing the label.  When a label is removed the messages that had only that label assigned end up back in your Inbox.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: nvdaremote on a windows vps

mattias
 

luke if you have it working

how do you do?

i have do as follow

as host in both win10 and server 2016:

nvdaremote.com

and set a key

try to connect from win10 to nvdaremote.com and entered my key

and press f12 to send keys to the vps

nothing


Den 2019-05-28 kl. 18:27, skrev luke scholey:

Yes, works perfectly
Luke

On 28 May 2019, at 17:24, mattias <mjonsson1986@gmail.com> wrote:

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway





Query about Gmail using chrome with NVDA

Meet modi
 

Hello,
I have Query regards gmail browser using chrome.
In gmail we create Lable.
this time i won;t to delete Lable please tell me how to delete it?


Re: nvdaremote on a windows vps

luke scholey
 

Yes, works perfectly
Luke

On 28 May 2019, at 17:24, mattias <mjonsson1986@gmail.com> wrote:

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway





nvdaremote on a windows vps

mattias
 

have anyone get nvdaremote to work on a vps?

e.g from a windows 10 machine

e.g

you have a vps with windows server 2016

you install nvda with the nvdaremote addon

and you connect to it with the windows 10 computer with nvda

good luck to do it annyway


Joseph Lee's add-ons: update rollout in progress #addonrelease

 

Hi all,

 

Many of my add-ons are receiving updates today (for some, you’ll notice version jumps, but don’t worry). Specifically, users of following add-ons will see an update today:

 

  • Add-on Updater (19.06): registers new add-ons added to the community website.
  • Easy Table Navigator (1.5): compatibility with alpha/beta snapshots.
  • Enhanced Touch Gestures (19.05.1): compatibility with alpha/beta snapshots.
  • Golden Cursor (3.6): compatibility with alpha/beta snapshots.
  • Object Location Tones (19.05.1): compatibility with alpha/beta snapshots.
  • ObjPad (19.05.1): compatibility with alpha/beta snapshots.
  • SystrayList (3.5): compatibility with alpha/beta snapshots.
  • Virtual Review (2.7): compatibility with alpha/beta snapshots.

 

Several important notes:

 

  1. These add-ons will be released in stages, so hopefully all of them should see the updates in the next few hours.
  2. Add-ons marked for compatibility with alpha/beta snapshots received manifest updates. I will not declare these as officially compatible with 2019.2 until beta 1 is released (although those of you using beta snapshots are running code that is similar to alpha builds at the moment).

 

Cheers,

Joseph


Has anyone else noticed a change in the behavior of Focus Highlight?

 

Or, perhaps more accurately, have your sighted assistant(s), as we're the ones that rely on this add-on.  It could be an NVDA change, too

Up until very recently, virtually everything generally defaulted to being in browse mode when I opened it, generally with the "thick red line" which indicates that you're in browse mode and the navigator object and focus object are one and the same.  This was particularly true when I landed on File Explorer (as a whole) and items in the list which I display using Details View.  It was also generally true in many other places.

For the last few days, everything seems to be opening in focus mode that used to be opening in browse mode, and what's weirder is I can't get the mode to toggle.  I was trying to play with doing a multi-file select with individual files in File Explorer, and could not get NVDA+space to shift me back to focus mode so I could select, move along then CTRL+select (spacebar), etc.

Even the buttons in dialogs are shown as being in focus mode when I land on them, e.g., the Winver Close button.

I am running Windows 10, Version 1809, Build 17763.529  and NVDA 2019.1.1 and Focus Highlight 6.0.  This is really peculiar, and definitely not what I've been used to.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: Converting PDF to Word

 

Quentin,

            I'm well aware of the issue with image PDFs.  There are so many in existence that they'll be landing in peoples' laps for decades to come.

            I have mentioned Tracker Software's PDF-XChange Viewer as an excellent OCR tool.  It's not fully accessible overall, but the OCR function is, and it supports English, Spanish, French, & German "as shipped" and you can get, also at no cost, various Language Extension Packages that cover many, many more.

            Here's the post in the archives where I give the step-by-step instructions for doing OCR with PDF-XChange Viewer.   OCR/PDF software is something, much like screen readers, where having minimal proficiency with more than one can pull one's proverbial bacon out of the fire.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: Extracting Text From Image in Word

 

Do you have a flatbed scanner or multi-function machine that came with OCR software (and most have in recent years)?

If so, and you are able to select those graphics, I'd simply select them, paste each on a single page, print them and scan them using the scanner and OCR.  So long as you have a system for knowing which belongs where (which could include a single additional annotation) that could work.

That or just copying the image, creating a separate word file including an annotation regarding source, pasting it in and using the screen reader OCR on that second document which would just contain pages of the images to make it easy for the OCR software to get only what it needs.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: I did it

Arlene
 

Yeeeeeeeeeeepeeeeee yeeeeeeeeepeeeeeee yeeeeeeeeeepeeeee  she’s gone! She’s gone!

 

Sent from Mail for Windows 10

 

From: Rosemarie Chavarria
Sent: May 27, 2019 9:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] I did it

 

Great.

 

 

On 5/27/2019 5:07 PM, Arlene wrote:

Hey list: I finally got rid of the contact.   In windows ten mail app. All you do is do control N and then you type in your contact’s name. You do shift F ten there you will see remove. Once you enter on remove. Woo hoo! Your contact is totally gone! Done like dinner!

 

Sent from Mail for Windows 10

 

 


Extracting Text From Image in Word

Bhavya shah
 

Dear all,

I am currently reading a Bookshare file in the Word format, and am
encountering graphics without alttext. These graphics contain just a
lot of text and likely no visual content themselves - graphics are of
the text of literary passages - and I am urgently looking for
solutions to be able to use OCR on them or extract their textual
content via similar means.

I have tried using the NVDA OCR add-on but I just cannot get object
navigation in NVDA to narrow down and review the graphic object in
Word, I do not have Kurzweil or Fine Reader (and likely will not be
getting them since the exam for which I am requiring to practise is on
Saturday itself), but would probably be happy to use an online
solution or a lightweight freeware.

I would greatly appreciate any urgently sought assistance or suggestions.

Thanks.

--
Best Regards
Bhavya Shah

Blogger at Hiking Across Horizons: https://bhavyashah125.wordpress.com/
E-mail Address: bhavya.shah125@gmail.com
LinkedIn: https://www.linkedin.com/in/bhavyashah125/


Re: I did it

Rosemarie Chavarria
 

Great.



On 5/27/2019 5:07 PM, Arlene wrote:

Hey list: I finally got rid of the contact.   In windows ten mail app. All you do is do control N and then you type in your contact’s name. You do shift F ten there you will see remove. Once you enter on remove. Woo hoo! Your contact is totally gone! Done like dinner!

 

Sent from Mail for Windows 10

 


I did it

Arlene
 

Hey list: I finally got rid of the contact.   In windows ten mail app. All you do is do control N and then you type in your contact’s name. You do shift F ten there you will see remove. Once you enter on remove. Woo hoo! Your contact is totally gone! Done like dinner!

 

Sent from Mail for Windows 10

 


Re: Converting PDF to Word

Quentin Christensen
 

The other point on this is that the reason many people want to convert from PDF to word, is to try and read a PDF document.

IF the PDF file has been created well to begin with, you should be able to read it just find in Adobe reader, Foxit PDF reader, and probably others.  If you can't read it in those (using a current version of both the reader and NVDA), then it's likely the PDF file was created as an image of text - a lot of office photocopier / scanners still do this.  In that case, what you really need to do is run the file through some kind of OCR (Optical Character Recognition).  NVDA has access to a basic OCR function in Windows 10 or with the OCR add-on in earlier versions.  Professional OCR programs like Abbyy FineReader or OmniPage may do a better job.

For converting from Word to PDF, the export function in Word itself makes quite readable PDF files.  For those who have the NVDA Certification, that's how I make the PDF certificates.

Kind regards

Quentin.

On Tue, May 28, 2019 at 1:10 AM Brian Vogel <britechguy@...> wrote:
On Sun, May 26, 2019 at 11:24 PM, sazid shaik wrote:
can we convert pdf to word using nvda? if so how?
No, or at least not per se.

There are various converters out there, including modern versions of MS-Word itself, which can read PDFs and then save them as Word files (or vice versa).

A web search on "PDF to DOCX" turns up myriad options.  

But none of these directly involve NVDA and I have no idea which may or may not be accessible.  Like so many things, it's up to you to determine that by trial and error.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Getting your Windows Version

 

Hi,
NVDA will log this info as part of its log (if the log is not disabled, that
is). Note that NVDA will record the version text as reported by Windows, not
its public-facing name e.g. NVDA will report "6.1.7601" instead of "Windows
7 Service Pack 1".
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Antony Stone
Sent: Monday, May 27, 2019 10:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Getting your Windows Version

As another aside to the NVDA developers, I assume that NVDA is able to
discover the Windows version for itself, so it might be useful to include
that information as well in the NVDA - Help - About details?

Antony.

On Monday 27 May 2019 at 19:15:09, Brian Vogel wrote:

I'll start by saying I know that the part about getting the Windows
version is off topic, but we are now in a period where the changes in
the latest Feature Update (Version 1903) and its interactions with
NVDA versions are significant.

As a result, it will often be critical when asking questions for the
Windows 10 Version, and sometimes build, numbers to be supplied when
they are asked. To get your Windows 10 Version you can do one of two
things:

1. Hit the Windows Key and immediately type winver , then hit enter.
You will be presented with the About Windows dialog which contains the
line with your version and build.

2. Hit WinKey+R, type in winver in the Open box, then hit enter.
You'll get the dialog noted above. This method should also work in
earlier versions of Windows as well.

If you need your NVDA version, NVDA+N,H,A will bring up the About dialog.

As an aside to the NVDA developers who may be reading, it might be
helpful to make NVDA read its own version number in the more conventional
"dot"
format, e.g., 2019 dot 1 dot 1. Right now it reads this as though it
were a date. It was really odd to have this come out as Version
January first 2019.
--
"640 kilobytes (of RAM) should be enough for anybody."

- Bill Gates

Please reply to the list;
please *don't* CC
me.