Date   

braille teathered to focus

ken lawrence
 

Hi list from time to time on NVDA for reasons I’m not clear on when I do an insert T to read a title window I will instead of that window hear NVDA say “braille teathered to focus.  I was launching a browser. And to correct this I had to shutdown then restart NVDA explorer for some reason crashes my screen reader.  While I don’t use it accept for very basic stuff and while chrome is my default it’s still a bit strange since I don’t have a braille display here anyone know wht is happening and why NVDA is giving me information on something that doesn’t apply to me. 

 

Sent from Mail for Windows 10

 


Moving between worksheets in XL

Sile
 

Correction, the NVDA microsoft tutorial says that:

ctrl-page up goes back to the previous worksheet and ctrl-page down goes to the next worksheet.


But this still means that fnKey plus ctrl plus up arrow should in theory move back to the previous worksheet in my configuration (see below) and fnKey plus ctrl plus page down should go to the next worksheet?


--Sile


Hello



OK, so I have an unusual constallation of issues and am wondering if anyone has an answer.


I am trying to figure out how to move between worksheets in XL But ...


1) I am running windows 10 under bootcamp on a mac laptop


2)  If I look up bootcamp, it says that page up/down are accomplished on a laptop running bootcamp by using fnKey-uparrow (page up) and fnKey-downarrow (page down)

This works in word, notepad, etc.


The microsoft XL tutorial for NVDA says that I can move between worksheets by using ctrl plus uparrow (laptop) to go back to the previous worksheet and CTRL plus down arrow to move to the next worksheet.


You might think then that pressing the fnKey plus control plus up arrow would allow me to move to the previous worksheet and fnKey plus ctrl plus down arrow would allow me to go to the next worksheet?


But this doesn't seem to work.


Any bootcamp users out there who might be able to help?


Yours,


--Sile


Moving between worksheets in XL

Sile
 

Hello


OK, so I have an unusual constallation of issues and am wondering if anyone has an answer.


I am trying to figure out how to move between worksheets in XL But ...


1) I am running windows 10 under bootcamp on a mac laptop


2)  If I look up bootcamp, it says that page up/down are accomplished on a laptop running bootcamp by using fnKey-uparrow (page up) and fnKey-downarrow (page down)

This works in word, notepad, etc.


The microsoft XL tutorial for NVDA says that I can move between worksheets by using ctrl plus uparrow (laptop) to go back to the previous worksheet and CTRL plus down arrow to move to the next worksheet.


You might think then that pressing the fnKey plus control plus up arrow would allow me to move to the previous worksheet and fnKey plus ctrl plus down arrow would allow me to go to the next worksheet?


But this doesn't seem to work.


Any bootcamp users out there who might be able to help?


Yours,


--Sile


Re: Asking a few NVDA questions.

Gene
 

I thought this message was in another thread on another list.  I was discussing shortcuts in the below answer for an e-mail program.  I see now that the question was asking about NvDA short cuts. 
 
There are short cuts to open certain dialogs such as to set speech parameters and select a synthesizer.  You can open many of the settings categories in NVDA. 
 
I'll tell you two or three shortcuts I know and there must be a place in the manual or the quick keys reference to find more. 
If you change settings and you want to go back to the settings you usually use, the shortcut is NvDA key control r.  You will hear configuration applied.  If you have saved the new settings, you can't go back in this way because the new settings are part of the configuration.  If you exit NVDA with new settings, by default, they will be saved.  I think this is a very bad default setting.  People should be able to try different settings and not have them inadvertently saved.  It should require an affirmative act by the user, not closing the program which may result from shutting down the system, or closing the program for other reasons. 
 
You can change this setting so changes aren't automatically saved, and if you do, you can save new settings with NVDA key control c. 
To open the voice dialog, the command is NVDA key control v.
To open the synthesizer dialog, it's NVDA key control s.
You can change how progress bars are read or not read. 
NVDA key control u.  There are a number of options you can move through.  You can move through them as many times as you want.
 
Gene

----- Original Message -----
Sent: Thursday, June 06, 2019 2:30 PM
Subject: Re: [NVDA] Asking a few NVDA questions.

I know the usual ones, control r, alt s, the generally used ones.  I believe there may be another shortcut command or two to do things like go to the deleted messages or sent mail folder but I'm not sure and I don't know them if they exist.
 
Gene
----- original Message -----
Sent: Thursday, June 06, 2019 2:03 PM
Subject: Re: [NVDA] Asking a few NVDA questions.

Thanks for the tip Jene.
Any other keyboard shortcuts you can teach this old dog to learn a new trick from?
Many thanks once again.
Ron Ham Radio Station KR3DOG-PA-WCECTM
 
From: Gene
Sent: Thursday, June 6, 2019 11:29
Subject: Re: [nvda] Asking a few NVDA questions.
 
Manually enter forms mode with NVDA key space. 
 
Gene
----- Original Message -----
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 10:07 PM
To: Non Visual Desktop Access Mailing List
Subject: [nvda] Asking a few NVDA questions.
 
Hello to my fellow NVDA users.
I'm playing my online rpg truck driving game using NVDA and have a few
questions.
For using a forms mode.
I noticed that you have to tap and shift tap to get forms mode to kick in
and press the esc key to get out of forms mode.
Is there a way to have forms mode kick in and out automatically, and simply
just smack the enter key and or spacebar to
1. activate a action?
2. As well the enter key and or spacebar would allow you back out of the
forms mode for filling out a field.
For example, in this example, I'm talking about the truck driving RPG game.
Now while within the truck driving setting my speed that I want to drive at
I have to use forms mode to enter into this feature.
So is there a way so that you don't have to constantly tab and back tab to
go into forms mode, and to constantly have to press the esc key to get out
of forms mode once again?
Similar to the way forms mode works like in JAWS?
I also noticed for two punctuations.
The Apostrophe comes out as the word tick.
So, if you use the Apostrophe like in a word like I am, it comes out as I
tick m instead of the contracted word, im.
Also the period is reading as dot.
The period comes out as dot instead of period or no punctuation at all.
I have the punctuation set to some.
Should I set it to none?
The comma reads correctly though.
Havn't tried other punctuations with NVDA just yet.

Also, why is it that I'm seeing in and out of tables and so many rows and
columns?
Is there a way to remove all of this extra information so that you only see
what you need or want to see, without all of the info on the tables and
columns and rows?
If we could, I think it would make reading the screen more effectively and
or better.

Many thanks to all who tried to help me learn how to use NVDA as a second
screen reader.
Very Thankfully Yours,
Ron, who needs to practice some more learning to use NVDA before I have to
use it with my flying simulatior and the programs that that are added onto
the flight sim so that a blind and or visually impared or BVI pilot may be
able to fly.

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager



In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: Asking a few NVDA questions.

Gene
 

I know the usual ones, control r, alt s, the generally used ones.  I believe there may be another shortcut command or two to do things like go to the deleted messages or sent mail folder but I'm not sure and I don't know them if they exist.
 
Gene
----- original Message -----

Sent: Thursday, June 06, 2019 2:03 PM
Subject: Re: [NVDA] Asking a few NVDA questions.

Thanks for the tip Jene.
Any other keyboard shortcuts you can teach this old dog to learn a new trick from?
Many thanks once again.
Ron Ham Radio Station KR3DOG-PA-WCECTM
 
From: Gene
Sent: Thursday, June 6, 2019 11:29
Subject: Re: [nvda] Asking a few NVDA questions.
 
Manually enter forms mode with NVDA key space. 
 
Gene
----- Original Message -----
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 10:07 PM
To: Non Visual Desktop Access Mailing List
Subject: [nvda] Asking a few NVDA questions.
 
Hello to my fellow NVDA users.
I'm playing my online rpg truck driving game using NVDA and have a few
questions.
For using a forms mode.
I noticed that you have to tap and shift tap to get forms mode to kick in
and press the esc key to get out of forms mode.
Is there a way to have forms mode kick in and out automatically, and simply
just smack the enter key and or spacebar to
1. activate a action?
2. As well the enter key and or spacebar would allow you back out of the
forms mode for filling out a field.
For example, in this example, I'm talking about the truck driving RPG game.
Now while within the truck driving setting my speed that I want to drive at
I have to use forms mode to enter into this feature.
So is there a way so that you don't have to constantly tab and back tab to
go into forms mode, and to constantly have to press the esc key to get out
of forms mode once again?
Similar to the way forms mode works like in JAWS?
I also noticed for two punctuations.
The Apostrophe comes out as the word tick.
So, if you use the Apostrophe like in a word like I am, it comes out as I
tick m instead of the contracted word, im.
Also the period is reading as dot.
The period comes out as dot instead of period or no punctuation at all.
I have the punctuation set to some.
Should I set it to none?
The comma reads correctly though.
Havn't tried other punctuations with NVDA just yet.

Also, why is it that I'm seeing in and out of tables and so many rows and
columns?
Is there a way to remove all of this extra information so that you only see
what you need or want to see, without all of the info on the tables and
columns and rows?
If we could, I think it would make reading the screen more effectively and
or better.

Many thanks to all who tried to help me learn how to use NVDA as a second
screen reader.
Very Thankfully Yours,
Ron, who needs to practice some more learning to use NVDA before I have to
use it with my flying simulatior and the programs that that are added onto
the flight sim so that a blind and or visually impared or BVI pilot may be
able to fly.

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager



In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: Asking a few NVDA questions.

Ron Kolesar
 

Thanks for the tip Jene.
Any other keyboard shortcuts you can teach this old dog to learn a new trick from?
Many thanks once again.
Ron Ham Radio Station KR3DOG-PA-WCECTM
 

From: Gene
Sent: Thursday, June 6, 2019 11:29
To: nvda@nvda.groups.io
Subject: Re: [nvda] Asking a few NVDA questions.
 
Manually enter forms mode with NVDA key space. 
 
Gene
----- Original Message -----
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 10:07 PM
To: Non Visual Desktop Access Mailing List
Subject: [nvda] Asking a few NVDA questions.
 
Hello to my fellow NVDA users.
I'm playing my online rpg truck driving game using NVDA and have a few
questions.
For using a forms mode.
I noticed that you have to tap and shift tap to get forms mode to kick in
and press the esc key to get out of forms mode.
Is there a way to have forms mode kick in and out automatically, and simply
just smack the enter key and or spacebar to
1. activate a action?
2. As well the enter key and or spacebar would allow you back out of the
forms mode for filling out a field.
For example, in this example, I'm talking about the truck driving RPG game.
Now while within the truck driving setting my speed that I want to drive at
I have to use forms mode to enter into this feature.
So is there a way so that you don't have to constantly tab and back tab to
go into forms mode, and to constantly have to press the esc key to get out
of forms mode once again?
Similar to the way forms mode works like in JAWS?
I also noticed for two punctuations.
The Apostrophe comes out as the word tick.
So, if you use the Apostrophe like in a word like I am, it comes out as I
tick m instead of the contracted word, im.
Also the period is reading as dot.
The period comes out as dot instead of period or no punctuation at all.
I have the punctuation set to some.
Should I set it to none?
The comma reads correctly though.
Havn't tried other punctuations with NVDA just yet.

Also, why is it that I'm seeing in and out of tables and so many rows and
columns?
Is there a way to remove all of this extra information so that you only see
what you need or want to see, without all of the info on the tables and
columns and rows?
If we could, I think it would make reading the screen more effectively and
or better.

Many thanks to all who tried to help me learn how to use NVDA as a second
screen reader.
Very Thankfully Yours,
Ron, who needs to practice some more learning to use NVDA before I have to
use it with my flying simulatior and the programs that that are added onto
the flight sim so that a blind and or visually impared or BVI pilot may be
able to fly.

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager



In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: NVDA and file explorer

Laz
 

On 6/5/19, Quentin Christensen <quentin@nvaccess.org> wrote:
Are you running any add-ons? If so, if you restart NVDA with add-ons
disabled (press NVDA+q then down arrow to restart with add-ons disabled and
press ENTER) does that make a difference?
* I tried the above directions to run NVDA without add-ons and all it
did was unload NVDA and nothing else. What's the correct keyboard
command to start NVDA without also loading the add-ons?

laz


Re: In-process 6th June

Jason White
 

It’s working well so far for me too, including the new Vispero/Freedom Scientific Focus braille display driver.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rosemarie Chavarria
Sent: Thursday, June 6, 2019 12:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] In-process 6th June

 

Hi, Quinten,

 

I just downloaded NVDA 2019.2 beta and so-far it’s working great.

 

Rosemarie

 

s

 

Sent from Mail for Windows 10

 

From: Quentin Christensen
Sent: Wednesday, June 5, 2019 9:06 PM
To: nvda@nvda.groups.io
Subject: [nvda] In-process 6th June

 

Hi everyone,

 

A new edition of In-Process is out, this time featuring NVDA 2019.2beta1 and how you can test it out.   Have you tried it yet? This week's post has lots of tips about how to set it up to test with, so please do and then be sure to let us know how you find it!

 

 

Quentin.

 

--

Quentin Christensen
Training and Support Manager

 

NVDA 2019.2beta1 now available!

 

 


Re: Asking a few NVDA questions.

Gene
 

Manually enter forms mode with NVDA key space. 
 
Gene

----- Original Message -----
Sent: Wednesday, June 05, 2019 10:07 PM
Subject: [nvda] Asking a few NVDA questions.

Hello to my fellow NVDA users.
I'm playing my online rpg truck driving game using NVDA and have a few
questions.
For using a forms mode.
I noticed that you have to tap and shift tap to get forms mode to kick in
and press the esc key to get out of forms mode.
Is there a way to have forms mode kick in and out automatically, and simply
just smack the enter key and or spacebar to
1. activate a action?
2. As well the enter key and or spacebar would allow you back out of the
forms mode for filling out a field.
For example, in this example, I'm talking about the truck driving RPG game.
Now while within the truck driving setting my speed that I want to drive at
I have to use forms mode to enter into this feature.
So is there a way so that you don't have to constantly tab and back tab to
go into forms mode, and to constantly have to press the esc key to get out
of forms mode once again?
Similar to the way forms mode works like in JAWS?
I also noticed for two punctuations.
The Apostrophe comes out as the word tick.
So, if you use the Apostrophe like in a word like I am, it comes out as I
tick m instead of the contracted word, im.
Also the period is reading as dot.
The period comes out as dot instead of period or no punctuation at all.
I have the punctuation set to some.
Should I set it to none?
The comma reads correctly though.
Havn't tried other punctuations with NVDA just yet.

Also, why is it that I'm seeing in and out of tables and so many rows and
columns?
Is there a way to remove all of this extra information so that you only see
what you need or want to see, without all of the info on the tables and
columns and rows?
If we could, I think it would make reading the screen more effectively and
or better.

Many thanks to all who tried to help me learn how to use NVDA as a second
screen reader.
Very Thankfully Yours,
Ron, who needs to practice some more learning to use NVDA before I have to
use it with my flying simulatior and the programs that that are added onto
the flight sim so that a blind and or visually impared or BVI pilot may be
able to fly.

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager




Re: NVDA 2019.2 beta 1

 

Hi,

This is due to Ease of Access requirement that you need to “press” Windows+U to let Windows know an assistive tech is running somehow (this is pressed by NVDA sometimes, not all the time).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Andre Fisher
Sent: Thursday, June 6, 2019 6:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2019.2 beta 1

 

I have observed a very odd behaviour where, when NVDA is started/restarted, the Windows 10 Settings app also opens at the Ease of Access Settings. Very odd indeed.


Re: Strike Through Text

rae.rankin@...
 

Thanks Quentin,

If you need to know, we are using Acrobat Pro 2017.
Windows 10
NVDA Version 2018.4.1


Asking a few NVDA questions.

Ron Kolesar
 

Hello to my fellow NVDA users.
I'm playing my online rpg truck driving game using NVDA and have a few questions.
For using a forms mode.
I noticed that you have to tap and shift tap to get forms mode to kick in and press the esc key to get out of forms mode.
Is there a way to have forms mode kick in and out automatically, and simply just smack the enter key and or spacebar to
1. activate a action?
2. As well the enter key and or spacebar would allow you back out of the forms mode for filling out a field.
For example, in this example, I'm talking about the truck driving RPG game.
Now while within the truck driving setting my speed that I want to drive at I have to use forms mode to enter into this feature.
So is there a way so that you don't have to constantly tab and back tab to go into forms mode, and to constantly have to press the esc key to get out of forms mode once again?
Similar to the way forms mode works like in JAWS?
I also noticed for two punctuations.
The Apostrophe comes out as the word tick.
So, if you use the Apostrophe like in a word like I am, it comes out as I tick m instead of the contracted word, im.
Also the period is reading as dot.
The period comes out as dot instead of period or no punctuation at all.
I have the punctuation set to some.
Should I set it to none?
The comma reads correctly though.
Havn't tried other punctuations with NVDA just yet.

Also, why is it that I'm seeing in and out of tables and so many rows and columns?
Is there a way to remove all of this extra information so that you only see what you need or want to see, without all of the info on the tables and columns and rows?
If we could, I think it would make reading the screen more effectively and or better.

Many thanks to all who tried to help me learn how to use NVDA as a second screen reader.
Very Thankfully Yours,
Ron, who needs to practice some more learning to use NVDA before I have to use it with my flying simulatior and the programs that that are added onto the flight sim so that a blind and or visually impared or BVI pilot may be able to fly.

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: NVDA 2019.2 beta 1

Andre Fisher
 

I have observed a very odd behaviour where, when NVDA is started/restarted, the Windows 10 Settings app also opens at the Ease of Access Settings. Very odd indeed.


NVDA 2019.2 beta 1

Don H
 

When installing NVDA 2019.2 beta 1 on my computer right after checking the I agree box the Windows 10 settings app opens and stays open until I close it after the NVDA install is complete.  No big deal just a little strange.


Re: Animated Slide behavior in Power Point

Sile
 

Scratch that, I just tried it, and nvda doesn’t seem to be Reading bullets line by line anymore.

Sile


On Jun 6, 2019, at 3:32 AM, Quentin Christensen <quentin@...> wrote:

Hi Rick,


And as yet, we haven't implemented a fix for it. We're aware it is one of the more annoying bugs with PowerPoint.

Quentin.

On Thu, Jun 6, 2019 at 8:27 PM Rick <softwarethatworks@...> wrote:

I created a Power Point presentation with some slide animations, where all content is not shown when a slide is first presented, but upon subsequent presses of the Page down button, more content is added to the slide.

 

NVDA seems to speak the entire slide content when the slide is first presented and is silent while remaining content is added at each press of the Page Down key. Is there a way to have NVDA speak only the shown matter when the slide is presented and then speak only the added content at each press of the Page Down key?

 

Thanks, Rick

 



--
Quentin Christensen
Training and Support Manager

NVDA 2019.2beta1 now available!


Re: Animated Slide behavior in Power Point

Sile
 

Hello Rick, have you tried pressing space instead of page down? That usually speaks the bullets as they’re revealed for me.

Sile


On Jun 6, 2019, at 3:27 AM, Rick <softwarethatworks@...> wrote:

I created a Power Point presentation with some slide animations, where all content is not shown when a slide is first presented, but upon subsequent presses of the Page down button, more content is added to the slide.

 

NVDA seems to speak the entire slide content when the slide is first presented and is silent while remaining content is added at each press of the Page Down key. Is there a way to have NVDA speak only the shown matter when the slide is presented and then speak only the added content at each press of the Page Down key?

 

Thanks, Rick

 


Determining if comments are resolved in Word

Rick
 

In newer version of Microsoft Word, a feature to Resolve Comments is present. When a comment is resolved, it is visually displayed collapsed and is dimmed (faded into the background).

 

I can use the context menu, and if the comment is resolved, the content menu will display a Reopen command instead of the Resolve Comment command. However, this is a tedious way to determine if a comment has been resolved.

 

Is there any  other way in NVDA to determine if a comment is resolved. I do not see it in the Elements dialog nor is it spoken when using the NVDA +Alt+C command to read a comment.

 

Enabling Microsoft’s UI Automation in the NVDA advanced settings dialog does not have any effect regarding resolved comments.

 

I am running the latest released version of Office 365 and NVDA.

 

Thanks, Rick

 


Re: Animated Slide behavior in Power Point

Quentin Christensen
 

Hi Rick,


And as yet, we haven't implemented a fix for it. We're aware it is one of the more annoying bugs with PowerPoint.

Quentin.

On Thu, Jun 6, 2019 at 8:27 PM Rick <softwarethatworks@...> wrote:

I created a Power Point presentation with some slide animations, where all content is not shown when a slide is first presented, but upon subsequent presses of the Page down button, more content is added to the slide.

 

NVDA seems to speak the entire slide content when the slide is first presented and is silent while remaining content is added at each press of the Page Down key. Is there a way to have NVDA speak only the shown matter when the slide is presented and then speak only the added content at each press of the Page Down key?

 

Thanks, Rick

 



--
Quentin Christensen
Training and Support Manager

NVDA 2019.2beta1 now available!


Animated Slide behavior in Power Point

Rick
 

I created a Power Point presentation with some slide animations, where all content is not shown when a slide is first presented, but upon subsequent presses of the Page down button, more content is added to the slide.

 

NVDA seems to speak the entire slide content when the slide is first presented and is silent while remaining content is added at each press of the Page Down key. Is there a way to have NVDA speak only the shown matter when the slide is presented and then speak only the added content at each press of the Page Down key?

 

Thanks, Rick

 


Re: Strike Through Text

Quentin Christensen
 

Although we were able to do this at one point, it appears that in recent versions of Adobe Reader, this isn't working.  I've filed an issue on our system:  https://github.com/nvaccess/nvda/issues/9677

Kind regards

Quentin.

On Thu, Jun 6, 2019 at 6:14 AM rae.rankin via Groups.Io <rae.rankin=dca.ca.gov@groups.io> wrote:
We are converting documents for accessibility and have some that show suggested text changes by using strikethrough. NVDA does not read the text as being struck. Is there a way to do that?
The text was created in a Word document and has been converted to a pdf.



--
Quentin Christensen
Training and Support Manager

NVDA 2019.2beta1 now available!

19961 - 19980 of 82150