Date   

2 e-mail acounts

Arlene
 

Hi list. I know this might not be the place to ask this.  Can I put 2 e-mail accounts on the windows ten mail app?  I tried doing this with NVDA.  It said I did it but nothing happened. I took my laptop to a sighted friends house. But it was no go.  Because her isp is slower then mine the computer just hung.  Thanks and have a good day.

 

Sent from Mail for Windows 10

 


question

anthony borg
 

Hi list
Could anyone tell me the name of that add-on which can be used as the
stickykeys?
Thanks in advance
Anthony


Re: NVDA doing something different for unlabeled graphics

Greg Wocher
 

Hello,
This has nothing to do with NVDA. It has something to do with chromium based browsers. I see this with JAWS and NVDA in the development version of edge based on chromium as well. 

Greg Wocher


On Jun 9, 2019, at 3:32 PM, Dan Beaver <dbeaver888@...> wrote:

Over the past few days NVDA has started doing something different than it had done in the past.  When I come to an unlabeled graphic on a webpage it says "to get image description open the context menu".


I have opened the settings menu for the Brave browser and I have also opened the system context menu and have looked through every setting I can find in NVDA.  I can't find any way to stop this irritating announcement.  What happened to it just saying graphic for unlabeled graphics?


Thanks for any info that anyone has.



-- 
Dan Beaver (KA4DAN)


NVDA doing something different for unlabeled graphics

Dan Beaver
 

Over the past few days NVDA has started doing something different than it had done in the past.  When I come to an unlabeled graphic on a webpage it says "to get image description open the context menu".


I have opened the settings menu for the Brave browser and I have also opened the system context menu and have looked through every setting I can find in NVDA.  I can't find any way to stop this irritating announcement.  What happened to it just saying graphic for unlabeled graphics?


Thanks for any info that anyone has.



-- 
Dan Beaver (KA4DAN)


Re: Nvda with cmd

Luke Davis
 

Power Shell is actually a bit worse than the main command prompt. Even with speak typed characters/words enabled, it doesn't.
It is an interesting environment, but as far as accessibility, I have found it similar or slightly inferior to regular cmd.

That said, I don't have the weird reading problems that some do with the regular command prompt--I hear typed characters just fine, and it doesn't unnecessarily spell things, so this may all be subjective.

Luke

On Sun, 9 Jun 2019, Felix G. wrote:

Have you tried doing your work in the Windows Power Shell rather than
the standard command prompt? I'm told this is a different kind of
console. Maybe it behaves better.


Re: Asking a few NVDA questions.

Sarah k Alawami
 

If you want to know more as this is starting to drift a bit see my youtube channel as there are over 700 videos, some of which are for blind flight simming. I do use nvda to do all of that. If you have any ore questionsn email me privatly as I have some resources that might help you if you are interested.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 9 Jun 2019, at 4:47, Felix G. wrote:

Wow! Flight simulation with a screen reader? Sounds exciting. So this
is Prepar3d plus some console interface?
Best,
Felix

Am Fr., 7. Juni 2019 um 17:44 Uhr schrieb Sarah k Alawami marrie12@...:

I know what you are talking about prepar works well with nvda. In fact i just used it last night to do a flight. About excel I don't use it but might have to relearn one day as it has ben since 2011 when I last used it and hated it. I past the test and took excel off of my system.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 7 Jun 2019, at 6:22, Ron Kolesar wrote:

That’s what I’ve been asking myself.
Any thoughts on solving this issue?
It also would help when I get the programs I need for the flight simulator as well, since the newer flight sim won’t work with the other screen reader.
So, this is why I’m trying to learn NVDA.
So any and all help will be deeply appreciated.
Especially if we could get rid of all of the tables, columns and rolls so we just see what we would like or need to see.
Many thanks.
Ron who’s a still new NVDA user.

From: Marcio via Groups.Io
Sent: Friday, June 7, 2019 00:53
To: nvda@nvda.groups.io
Subject: Re: [nvda] Asking a few NVDA questions.

Ron,

Is there a way to remove all of this extra information so that you only see what you need or want to see, without all of the info on the tables and columns and rows?

CTRL+NVDA+D should do the trick. You can play with the checkboxes there, checking and unchecking them according to your liking.
Hth

Cheers,
Marcio AKA Starboy

Sent from a galaxy far, far away.

--
Are you a Thunderbird user? Then join the Thunderbird mailing list to help and be helped with all Thunderbird things - questions, features, add-ons and much more!
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Nvda and setting of Ccleaner

Jarek.Krcmar
 

Hi all,

I have downloaded and installed Ccleaner, but I have found out a problem:

I would like to set the Czech language, set it seems to me, that Nvda doesn't see the languages in the options.

How do you work with the Ccleaner, you, who lives in the oder lands?


--
Jarek


Re: Nvda with cmd

Felix G.
 

Have you tried doing your work in the Windows Power Shell rather than
the standard command prompt? I'm told this is a different kind of
console. Maybe it behaves better.
Best,
Felix

Am So., 9. Juni 2019 um 14:18 Uhr schrieb farhan israk
<fahim.net.2014@gmail.com>:


Thank you. I don't want to turn off type word and character. Isn't there any other way to stop it?


On Sun, 9 Jun 2019, 5:42 pm Felix G., <constantlyvariable@gmail.com> wrote:

Hi,
confirmed. When keyboard and word echo are off, the extra speech goes away.
Background: NVDA cannot hook keypresses in the console, so in order to
provide keyboard echo, it watches for characters appearing on the
trails of the cursor. To put it simply, NVDA is mistaking output for
input. It tends to happen less on fast machines.
Best,
Felix

Am So., 9. Juni 2019 um 11:44 Uhr schrieb Robert Mendoza
<lowvisiontek@gmail.com>:

Hi,


Apologize its NVDA plus 2

and/ or NVDA plus 3

On 6/9/2019 5:42 PM, Robert Mendoza via Groups.Io wrote:

Hi,


You need to disable the speak of the character and words

by pressing NVDA plus 1, or

NVDA plus 2

On 6/9/2019 1:19 PM, farhan israk wrote:

How to stop nvda spelling output of cmd automatically?



Re: Nvda with cmd

farhan israk
 

Thank you. I don't want to turn off type word and character. Isn't there any other way to stop it?


On Sun, 9 Jun 2019, 5:42 pm Felix G., <constantlyvariable@...> wrote:
Hi,
confirmed. When keyboard and word echo are off, the extra speech goes away.
Background: NVDA cannot hook keypresses in the console, so in order to
provide keyboard echo, it watches for characters appearing on the
trails of the cursor. To put it simply, NVDA is mistaking output for
input. It tends to happen less on fast machines.
Best,
Felix

Am So., 9. Juni 2019 um 11:44 Uhr schrieb Robert Mendoza
<lowvisiontek@...>:
>
> Hi,
>
>
> Apologize its NVDA plus 2
>
> and/ or NVDA plus 3
>
> On 6/9/2019 5:42 PM, Robert Mendoza via Groups.Io wrote:
>
> Hi,
>
>
> You need to disable the speak of the character and words
>
> by pressing NVDA plus 1, or
>
> NVDA plus 2
>
> On 6/9/2019 1:19 PM, farhan israk wrote:
>
> How to stop nvda spelling output of cmd automatically?
>
>




Re: Asking a few NVDA questions.

Felix G.
 

Wow! Flight simulation with a screen reader? Sounds exciting. So this
is Prepar3d plus some console interface?
Best,
Felix

Am Fr., 7. Juni 2019 um 17:44 Uhr schrieb Sarah k Alawami <marrie12@gmail.com>:


I know what you are talking about prepar works well with nvda. In fact i just used it last night to do a flight. About excel I don't use it but might have to relearn one day as it has ben since 2011 when I last used it and hated it. I past the test and took excel off of my system.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 7 Jun 2019, at 6:22, Ron Kolesar wrote:

That’s what I’ve been asking myself.
Any thoughts on solving this issue?
It also would help when I get the programs I need for the flight simulator as well, since the newer flight sim won’t work with the other screen reader.
So, this is why I’m trying to learn NVDA.
So any and all help will be deeply appreciated.
Especially if we could get rid of all of the tables, columns and rolls so we just see what we would like or need to see.
Many thanks.
Ron who’s a still new NVDA user.

From: Marcio via Groups.Io
Sent: Friday, June 7, 2019 00:53
To: nvda@nvda.groups.io
Subject: Re: [nvda] Asking a few NVDA questions.

Ron,

Is there a way to remove all of this extra information so that you only see what you need or want to see, without all of the info on the tables and columns and rows?

CTRL+NVDA+D should do the trick. You can play with the checkboxes there, checking and unchecking them according to your liking.
Hth

Cheers,
Marcio AKA Starboy

Sent from a galaxy far, far away.

--
Are you a Thunderbird user? Then join the Thunderbird mailing list to help and be helped with all Thunderbird things - questions, features, add-ons and much more!
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: Nvda with cmd

Felix G.
 

Hi,
confirmed. When keyboard and word echo are off, the extra speech goes away.
Background: NVDA cannot hook keypresses in the console, so in order to
provide keyboard echo, it watches for characters appearing on the
trails of the cursor. To put it simply, NVDA is mistaking output for
input. It tends to happen less on fast machines.
Best,
Felix

Am So., 9. Juni 2019 um 11:44 Uhr schrieb Robert Mendoza
<lowvisiontek@gmail.com>:


Hi,


Apologize its NVDA plus 2

and/ or NVDA plus 3

On 6/9/2019 5:42 PM, Robert Mendoza via Groups.Io wrote:

Hi,


You need to disable the speak of the character and words

by pressing NVDA plus 1, or

NVDA plus 2

On 6/9/2019 1:19 PM, farhan israk wrote:

How to stop nvda spelling output of cmd automatically?


Reading replies to Microsoft Word comments

Rick
 

In Microsoft Word, if the cursor is on text that is associated with a comment, you can press NVDA+ALT+C and NVDA will speak the comment. However, if there are any replies to that comment, there does not seem to be any indication that replies exist. I know that I can open the elements dialog (in browse mode, press NVDA+F7) to see all the comments in a Word document and replies are indicated by levels other than “level 0.”

 

I can also press ALT+R, N to navigate through comments in Word, but there is no indication whether a comment is a parent or a reply. If I turn on “Use Microsoft UI Automation” in the advanced settingns dialog, levels are reported but not always accurately. Also, all comments are reported as level  0 in the element dialog.

 

Is there a way without opening the elements dialog to read replies to comments?

 

Rick

 


Re: Nvda with cmd

Robert Mendoza
 

Hi,


Apologize its NVDA plus 2

and/ or NVDA plus 3

On 6/9/2019 5:42 PM, Robert Mendoza via Groups.Io wrote:

Hi,


You need to disable the speak of the character and words

by pressing NVDA plus 1, or

NVDA plus 2

On 6/9/2019 1:19 PM, farhan israk wrote:

How to stop nvda spelling output of cmd automatically?


Re: Nvda with cmd

Robert Mendoza
 

Hi,


You need to disable the speak of the character and words

by pressing NVDA plus 1, or

NVDA plus 2

On 6/9/2019 1:19 PM, farhan israk wrote:

How to stop nvda spelling output of cmd automatically?


Nvda with cmd

farhan israk
 

How to stop nvda spelling output of cmd automatically?


Re: chrome

hurrikennyandopo ...
 

Hi



Try the following and see if it works.


I was doing it on a windows 10 machine with google chrome.


I am guessing some one has put it into full screen mode in google chrome.


Try the following when in the google chrome browseer use the F11 key you might have to do it a couple of times then try your F6 key.


I noticed when it is in full screen mode you could not use the f6 key to get there but when full screen was turned off you could then and if that is the case when it is back to normal leave it.


Mentioned by other people also use the ctrl key + letter L will jump you to the location bar, I think the ALT key + E will do it and I think if i remember right the ctrl key + D but not sure if it will do it in full screen mode until I try it I think it still does with ctrl + L


Hope that fixes it.


Gene nz


On 9/06/2019 9:46 AM, Daniel Damacena wrote:
There's something wrong! It's been a long time since I started using chrome as my default browser and I can always press f6  to access the adress bar.
Try to press control + l. It's the direct hotkey, at least in my native language.

Em ter, 9 de abr de 2019 às 18:14, Monte Single <mrsingle@...> escreveu:

Hi list,

 

I am using win 7 with nvda and latest chrome.

When I use I e and firefox, I can press f6 and have the address bar highlighted so I can copy and paste it.

When I press f6  in chrome, I land on various things but not the address bar of the current page.

How do I do this.

 

Thanks,

Monte



--
Daniel Damacena
--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: chrome

Daniel Damacena
 

There's something wrong! It's been a long time since I started using chrome as my default browser and I can always press f6  to access the adress bar.
Try to press control + l. It's the direct hotkey, at least in my native language.

Em ter, 9 de abr de 2019 às 18:14, Monte Single <mrsingle@...> escreveu:

Hi list,

 

I am using win 7 with nvda and latest chrome.

When I use I e and firefox, I can press f6 and have the address bar highlighted so I can copy and paste it.

When I press f6  in chrome, I land on various things but not the address bar of the current page.

How do I do this.

 

Thanks,

Monte



--
Daniel Damacena


Re: Adding Time-Stop Marks to Audio Tracks

Kerryn Gunness <k_gunness@...>
 


cool
 

----- Original Message -----
From: Gene
Sent: Saturday, June 8, 2019 4:56 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

I should also point out that I found another useful way to use the Time Markers add-on. I tried creating a marker with the file loaded in Winamp but no time set.  In other words, I let the file play just a bit, then I stopped, not paused, the file.  The time marker created with with Winamp stopped loads the file into Winamp and starts playing it from the beginning. 
 
So, if you have some files in various places and you want quick access to them, as though they were all in one folder, you can use the program for that purpose as well.
 
Gene 
----- Original Message -----
Sent: Saturday, June 08, 2019 3:13 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

no the extended winamp add on do not do this
its a separate program called winamp time markers
 
----- Original Message -----
From: Gene
Sent: Friday, June 7, 2019 11:22 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

It appears very unlikely that the extended Winamp Add-on has the ability to set time markers.  The description says nothing about this ability.
 
This add-on, developed by Carlos, who contributed a lot to the community before his untimely death, does so, according to another list member.  I found this link in the archives.  I don't know if it works with the same commands and in the same manner as a previous post from another list member describes. 
 
Gene
----- Original Message -----

From: Gene
Sent: Friday, June 07, 2019 9:58 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

If so, it requires an add-on.  Is that add-on on the official site?  If so, I seem to have a vague recollection, now that you say that, that it isn't the regular Winamp add-on, but some sort of more general one that combines a number of enhancements for various programs and may not be on the official site.
 
Gene
----- Original Message -----
Sent: Friday, June 07, 2019 7:19 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

no, they are used with NVDA, i use it with NVDA
jaws has its own scripts to mark files in winamp
 
----- Original Message -----
From: Gene
Sent: Friday, June 7, 2019 8:12 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

These commands apply to JAWS users.  It is a feature that JAWS provides but it isn't a Winamp feature.
 
Gene
----- Original Message -----
Sent: Friday, June 07, 2019 7:05 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

to use winamp time markers
 
1 play the track in winamp, then pause it
2 go to desktop and open winamp time markers
3 when it is open, you will hear list
4 tab once to create marker and press enter
5 input a marker name and tab to ok button and press enter
6 you're done, close everythingto return to the marker later
 
to return to the marker
 
1 reopen the file in winamp, then stop the track from playing
2 go to the desktop and open winamp time marker
3 you will hear list
4 right here, use arrow keys to select the marker which you created
5 press enter on the marker name and it should begin to play from where it was paused last
6 or you can also tab to jump to marker button and press enter
you're done
 
 
----- Original Message -----
Sent: Friday, June 7, 2019 10:20 AM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

How can I use it? Being able to add markers would help me a lot with english listening exercises...
Thank you!

Em dom, 14 de abr de 2019 às 18:44, Andre Fisher <andrefisher729@...> escreveu:
Hi.

Here is the download link for the Winamp time markers 1.1 installer.

http://opopanax.net/download/Setup_WinampTimeMarkersexe



--
Daniel Damacena


Re: Adding Time-Stop Marks to Audio Tracks

Gene
 

I should also point out that I found another useful way to use the Time Markers add-on. I tried creating a marker with the file loaded in Winamp but no time set.  In other words, I let the file play just a bit, then I stopped, not paused, the file.  The time marker created with with Winamp stopped loads the file into Winamp and starts playing it from the beginning. 
 
So, if you have some files in various places and you want quick access to them, as though they were all in one folder, you can use the program for that purpose as well.
 
Gene 

----- Original Message -----
Sent: Saturday, June 08, 2019 3:13 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

no the extended winamp add on do not do this
its a separate program called winamp time markers
 
----- Original Message -----
From: Gene
Sent: Friday, June 7, 2019 11:22 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

It appears very unlikely that the extended Winamp Add-on has the ability to set time markers.  The description says nothing about this ability.
 
This add-on, developed by Carlos, who contributed a lot to the community before his untimely death, does so, according to another list member.  I found this link in the archives.  I don't know if it works with the same commands and in the same manner as a previous post from another list member describes. 
 
Gene
----- Original Message -----

From: Gene
Sent: Friday, June 07, 2019 9:58 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

If so, it requires an add-on.  Is that add-on on the official site?  If so, I seem to have a vague recollection, now that you say that, that it isn't the regular Winamp add-on, but some sort of more general one that combines a number of enhancements for various programs and may not be on the official site.
 
Gene
----- Original Message -----
Sent: Friday, June 07, 2019 7:19 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

no, they are used with NVDA, i use it with NVDA
jaws has its own scripts to mark files in winamp
 
----- Original Message -----
From: Gene
Sent: Friday, June 7, 2019 8:12 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

These commands apply to JAWS users.  It is a feature that JAWS provides but it isn't a Winamp feature.
 
Gene
----- Original Message -----
Sent: Friday, June 07, 2019 7:05 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

to use winamp time markers
 
1 play the track in winamp, then pause it
2 go to desktop and open winamp time markers
3 when it is open, you will hear list
4 tab once to create marker and press enter
5 input a marker name and tab to ok button and press enter
6 you're done, close everythingto return to the marker later
 
to return to the marker
 
1 reopen the file in winamp, then stop the track from playing
2 go to the desktop and open winamp time marker
3 you will hear list
4 right here, use arrow keys to select the marker which you created
5 press enter on the marker name and it should begin to play from where it was paused last
6 or you can also tab to jump to marker button and press enter
you're done
 
 
----- Original Message -----
Sent: Friday, June 7, 2019 10:20 AM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

How can I use it? Being able to add markers would help me a lot with english listening exercises...
Thank you!

Em dom, 14 de abr de 2019 às 18:44, Andre Fisher <andrefisher729@...> escreveu:
Hi.

Here is the download link for the Winamp time markers 1.1 installer.

http://opopanax.net/download/Setup_WinampTimeMarkersexe



--
Daniel Damacena


Re: Adding Time-Stop Marks to Audio Tracks

Gene
 

And this goes directly to the comment made by Brian a day or two ago.  There should be some way to find out about nonapproved add-ons and let the users decide if they want to assume the risk of using them.  Who knows how many useful add-ons aren't known about because they are placed here and there and given little publicity and are not discussed to any extent.
 
There may be add-ons that wouldn't be listed because they are known to be unsafe or come from untrusted sources, or perhaps a probation period should be allowed and then the ones that don't generate complaints that amount to anything would be listed. 
Gene

----- Original Message -----
Sent: Saturday, June 08, 2019 3:13 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

no the extended winamp add on do not do this
its a separate program called winamp time markers
 
----- Original Message -----
From: Gene
Sent: Friday, June 7, 2019 11:22 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

It appears very unlikely that the extended Winamp Add-on has the ability to set time markers.  The description says nothing about this ability.
 
This add-on, developed by Carlos, who contributed a lot to the community before his untimely death, does so, according to another list member.  I found this link in the archives.  I don't know if it works with the same commands and in the same manner as a previous post from another list member describes. 
 
Gene
----- Original Message -----

From: Gene
Sent: Friday, June 07, 2019 9:58 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

If so, it requires an add-on.  Is that add-on on the official site?  If so, I seem to have a vague recollection, now that you say that, that it isn't the regular Winamp add-on, but some sort of more general one that combines a number of enhancements for various programs and may not be on the official site.
 
Gene
----- Original Message -----
Sent: Friday, June 07, 2019 7:19 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

no, they are used with NVDA, i use it with NVDA
jaws has its own scripts to mark files in winamp
 
----- Original Message -----
From: Gene
Sent: Friday, June 7, 2019 8:12 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

These commands apply to JAWS users.  It is a feature that JAWS provides but it isn't a Winamp feature.
 
Gene
----- Original Message -----
Sent: Friday, June 07, 2019 7:05 PM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

to use winamp time markers
 
1 play the track in winamp, then pause it
2 go to desktop and open winamp time markers
3 when it is open, you will hear list
4 tab once to create marker and press enter
5 input a marker name and tab to ok button and press enter
6 you're done, close everythingto return to the marker later
 
to return to the marker
 
1 reopen the file in winamp, then stop the track from playing
2 go to the desktop and open winamp time marker
3 you will hear list
4 right here, use arrow keys to select the marker which you created
5 press enter on the marker name and it should begin to play from where it was paused last
6 or you can also tab to jump to marker button and press enter
you're done
 
 
----- Original Message -----
Sent: Friday, June 7, 2019 10:20 AM
Subject: Re: [nvda] Adding Time-Stop Marks to Audio Tracks

How can I use it? Being able to add markers would help me a lot with english listening exercises...
Thank you!

Em dom, 14 de abr de 2019 às 18:44, Andre Fisher <andrefisher729@...> escreveu:
Hi.

Here is the download link for the Winamp time markers 1.1 installer.

http://opopanax.net/download/Setup_WinampTimeMarkersexe



--
Daniel Damacena