Date   
Re: annoying "line feed" characters.

Luke Davis
 

If speech dictionaries are profile dependent, you could create and activate a config profile for your editor, then change "line feed" to space in the speech dictionary, and then save your config profile.

I don't actually know if dictionaries are saved separately with profiles, however--I suspect not. In which case you could only do this system wide. Or write a tiny add-on to deal with it.

Luke

On Fri, 9 Aug 2019, Curtis Delzer wrote:

When I use a sound editor like Studio recorder, I cannot get NVDA to stop saying "line feed" when I press an arrow key with the main screen of the editor. What can I do?

-


Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@...



annoying "line feed" characters.

Curtis Delzer
 

When I use a sound editor like Studio recorder, I cannot get NVDA to stop saying "line feed" when I press an arrow key with the main screen of the editor. What can I do?

-


Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@...

Re: disabling NVDA collapse/expanded prompt in firefox 68.01

Arlene
 

Hi I don’t use firefox. But I bet clapsed and expanded does get old and annoying.  I hope you get your problem resolved.  I don’t have firefox installed on this win ten machine.  I had that problem with my old win 7 before it died. 

 

Sent from Mail for Windows 10

 

From: Orhan Deniz via Groups.Io
Sent: August 9, 2019 6:16 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] disabling NVDA collapse/expanded prompt in firefox 68.01

 

Yes, I tried that before I wrote this post. Alas it did not seem to work.

 

On 10/08/2019 00:49, zahra wrote:

> hi.

> i am not familiar with newer versions of firefox,

> but i believe that its good to test disabling autocomplete in firefox

> about:config

> browser.urlbar.autocomplete.enabled

> i disabled it in my favorite version of firefox which is firefox 50.

> hope that can helps you, God bless you!

>

> On 8/10/19, Orhan Deniz via Groups.Io

> <orhan.deniz63@...> wrote:

>> Hi. probably something really obvious I'm missing here but has anyone

>> figured out a way to disable the NVDA collapsed/expanded prompt in the

>> firefox address bar of version 66 and upwards? I find it to be

>> slightly irritating and cumbersome as I just type my address and then

>> move on, I

>> don't need to know whether its expanded or collapsed in this instance.

>> I have also disabled autofill in about:config however I believe this

>> is something to do more with NVDA than ff. also using NVDA 19.1.

>> 

>> Cheers, Orhan.

>> 

>> 

>> 

>> 

>

>

 

 

 

Re: disabling NVDA collapse/expanded prompt in firefox 68.01

Orhan Deniz <orhan.deniz63@...>
 

Yes, I tried that before I wrote this post. Alas it did not seem to work.

On 10/08/2019 00:49, zahra wrote:
hi.
i am not familiar with newer versions of firefox,
but i believe that its good to test disabling autocomplete in firefox
about:config
browser.urlbar.autocomplete.enabled
i disabled it in my favorite version of firefox which is firefox 50.
hope that can helps you, God bless you!
On 8/10/19, Orhan Deniz via Groups.Io
<orhan.deniz63=googlemail.com@groups.io> wrote:
Hi. probably something really obvious I'm missing here but has anyone
figured out a way to disable the NVDA collapsed/expanded prompt in the
firefox address bar of version 66 and upwards? I find it to be
slightly irritating and cumbersome as I just type my address and then
move on, I
don't need to know whether its expanded or collapsed in this instance.
I have also disabled autofill in about:config however I believe this
is something to do more with NVDA than ff. also using NVDA 19.1.

Cheers, Orhan.



Re: Regarding captcha solver

Hope Williamson <hopeisjoyful@...>
 

Hi, just curious, but wouldn't it be better to charge yearly? For instance $30-$50 per year?

Re: disabling NVDA collapse/expanded prompt in firefox 68.01

 

hi.
i am not familiar with newer versions of firefox,
but i believe that its good to test disabling autocomplete in firefox
about:config
browser.urlbar.autocomplete.enabled
i disabled it in my favorite version of firefox which is firefox 50.
hope that can helps you, God bless you!

On 8/10/19, Orhan Deniz via Groups.Io
<orhan.deniz63=googlemail.com@groups.io> wrote:
Hi. probably something really obvious I'm missing here but has anyone
figured out a way to disable the NVDA collapsed/expanded prompt in the
firefox address bar of version 66 and upwards? I find it to be
slightly irritating and cumbersome as I just type my address and then
move on, I
don't need to know whether its expanded or collapsed in this instance.
I have also disabled autofill in about:config however I believe this
is something to do more with NVDA than ff. also using NVDA 19.1.

Cheers, Orhan.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali

Re: Signatures in Windows 10 mail app

David Moore
 

Hello all I have had many problems accessing that signature filled with nvda and Jaws. that has not been accessible for a long time. Many people have called Microsoft about not being able to add a signature, and they simply won't do anything about it. David Moore


On Fri, Aug 9, 2019, 9:15 AM Andy B. <sonfire11@... wrote:

Hi,

 

I am trying to set up email signatures in the Windows 10 mail app. Unfortunately, when I go to settings>signatures and try to put focus on what looks to be an edit field, NVDA doesn’t read anything. In fact, it appears to get stuck after tabbing through the formatting toolbar. So, how would I create my email signatures?

 

 

Sent from Mail for Windows 10

 

Re: Windows 10 mail app reading inconsistently in email composition window

David Moore
 

hello all! I am so glad that you brought that up about how the Windows mail app is acting. I have had exactly the same problem in the Windows 10 mail app, what I have to do, is use the review cursor reading commands to read the mail message with the review cursor, find where I want to edit, and then press the key command to move the focus to where the review cursor is, and then I can cracked my mistakes. The the review cursor is the only way I can read an email. You are cracked, if I simply use the up and down arrow keys the focus will not say the correct text at all for what is on each line and the message that you are typing in the mail app. Nvda has not worked well in the Windows 10 mail app for a long time when it comes to typing, reading, and doing just about anything with messages. I have to use many round about ways to even use the Windows 10 mail app oh, like I said, I have to read messages with the review cursor. David Moore

Re: winamp

Luke Davis
 

On Fri, 9 Aug 2019, Gene wrote:

Perhaps this should be a general setting, automatically read the title bar when it changes in the opened Window.  Then you could set up a profile if you
only want it to be done in a specific program.
Agreed. I believe that would solve the problem of program states changing from non-responsive to responsive, and NVDA not mentioning it.

Luke

Re: winamp

Arlene
 

Also. When I went to a folder nvda read the title when the one track was finished.  I tried this when listening to an album.

 

Sent from Mail for Windows 10

 

From: Arlene via Groups.Io
Sent: August 9, 2019 2:43 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] winamp

 

Hi list. Sorry no bug in my ear.  When I played a song in winamp. NVDA told me the title of the song and artest.

 

Sent from Mail for Windows 10

 

From: Robert Doc Wright godfearer
Sent: August 9, 2019 2:45 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] winamp

 

I am hoping to put a bug in the developers ears. I use to be able to do this in Jaws. I would love to be able to picture frame the track title and artist so that as the field changes it is automatically announced.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Lisa P Geibel
Sent: Friday, August 9, 2019 2:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] winamp

 

Hi,

 

My husband, Marcus is the real Winamp user and he said to his knowledge,

the answer to your question is no, but if there is a way, he'd love to know?

 

Lisa P. Geibel

For Mine and Marcus's Christian and Messianic audio show, call 631-403-1002 and press 9997 for that show.

For Marcus's Big Brother breaking news and shows, call the same number above, but press 9998 for that show.

For either show, once you're in, press 1, then 0

If you want to hear previous shows, after dialing the above phone number and choosing which show you want, press 2.

We'd love to hear from anyone about these shows and thank you for listening.

email:

  lisapgeibel429@...

Twitter:

LisaLisa429

Facebook:

m.facebook.com/ldporter1

May YHWH bless you all

 

On 8/8/2019 12:32 PM, Robert Doc Wright godfearer wrote:

> Is there anything I can do to get NVDA to announce the track title as

> the songs change?

> If all I have left in this world is God, I have everything!

>                 Sent from Mail

> <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

>

 

 

 

 

 

Re: winamp

Arlene
 

Hi list. Sorry no bug in my ear.  When I played a song in winamp. NVDA told me the title of the song and artest.

 

Sent from Mail for Windows 10

 

From: Robert Doc Wright godfearer
Sent: August 9, 2019 2:45 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] winamp

 

I am hoping to put a bug in the developers ears. I use to be able to do this in Jaws. I would love to be able to picture frame the track title and artist so that as the field changes it is automatically announced.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Lisa P Geibel
Sent: Friday, August 9, 2019 2:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] winamp

 

Hi,

 

My husband, Marcus is the real Winamp user and he said to his knowledge,

the answer to your question is no, but if there is a way, he'd love to know?

 

Lisa P. Geibel

For Mine and Marcus's Christian and Messianic audio show, call 631-403-1002 and press 9997 for that show.

For Marcus's Big Brother breaking news and shows, call the same number above, but press 9998 for that show.

For either show, once you're in, press 1, then 0

If you want to hear previous shows, after dialing the above phone number and choosing which show you want, press 2.

We'd love to hear from anyone about these shows and thank you for listening.

email:

  lisapgeibel429@...

Twitter:

LisaLisa429

Facebook:

m.facebook.com/ldporter1

May YHWH bless you all

 

On 8/8/2019 12:32 PM, Robert Doc Wright godfearer wrote:

> Is there anything I can do to get NVDA to announce the track title as

> the songs change?

> If all I have left in this world is God, I have everything!

>                 Sent from Mail

> <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

>

 

 

 

 

Issue with NVDA, Thunderbird, and pasting links

Scott Berry
 

Hello there,


I am noticing while pasting links in to my emails that NVDA 2019RC2 is taking some time to realize that the email link has been pasted in to the message.  Usually I always read my messages before sending unless I am in a hurry and I notice that when the link is first embedded it doesn't want to read the link unless I go up and down with the arrows several times.  It can vary how many times this is done.  Here are the exact steps I take.


1.  Open Thunderbird.


2.  Open a new message with Control plus N.


3.  I first write the message and when I get to the point where I think the link needs to be embedded I have the link in the clipboard and paste it in to the message.


3A.  I always try to make sure the link actually embeds so I will especially just look for the link by going up and down as well.


4.  Usually at this point is where I proof read the message and here is where NVDA has a hard time attempting to read the link.


NVDA is great and I use it every day for my work as a patient advocate.  I prefer it over any other screen reader that Windows can provide me with.





--
Scott Berry Certified Medical Office Assistant, Associates in Allied Health, Patient Advocate Please boogie on over to our site at: http://www.berrysadvocating.biz

disabling NVDA collapse/expanded prompt in firefox 68.01

Orhan Deniz <orhan.deniz63@...>
 

Hi. probably something really obvious I'm missing here but has anyone
figured out a way to disable the NVDA collapsed/expanded prompt in the
firefox address bar of version 66 and upwards? I find it to be
slightly irritating and cumbersome as I just type my address and then move on, I
don't need to know whether its expanded or collapsed in this instance.
I have also disabled autofill in about:config however I believe this
is something to do more with NVDA than ff. also using NVDA 19.1.

Cheers, Orhan.

Re: Station Playlist AddOn Question

 

Hi,
Yes - these commands are native to encoders - or rather, for some of them. F9 is native to SAM encoders, while in SPL encoders, F9 presses "connect" button. F11 series (including Shift=F11 and Control+F11) is used to set various encoder options specific to NVDA such as focusing to Studio when connecting and/or playing the first selected track.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joshua Tubbs
Sent: Friday, August 9, 2019 12:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station Playlist AddOn Question

Studio version is 5.31, latest addon version.

I figured out how to get it working though, I just have to be in the list of encoders to press the hotkeys.


On 8/7/19, Joseph Lee <@joslee> wrote:
Hi,
Is this with the add-on installed? If yes, what is the add-on version
you've got and Studio version in use?
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joshua
Tubbs
Sent: Wednesday, August 7, 2019 4:12 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station Playlist AddOn Question

I have SPL open with the encoder focused. Pressing F11 does/says
nothing here.

F9 also does not do anything.

Is there a way to have the MP3 recorder start up on connect as well as
to start playing the checked tracks, like Jaws and Hartgens scripts do?



On 8/7/19, Joseph Lee <@joslee> wrote:
Hi,

I think he meant configuring that option, which can be done from
encoders window only as this is specific to encoders. The F11 command
will not let you switch to Studio from anywhere - it is a toggle
command to tell NVDA to switch to Studio when the selected encoder
connects.

Cheers,

Joseph



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Roger
Stewart
Sent: Wednesday, August 7, 2019 1:02 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station Playlist AddOn Question



No. You can be anywhere doing anything and when you are connected, it
will switch to the SPL window if you have that function on.

Roger

























On 8/7/2019 2:36 PM, Dan Kerstetter wrote:

Hello all.



Do I need to be in the studio window or the encoder window to use
the additional commands for SAM and SPL encoders? I want to use f11
to switch automatically to the studio window when I'm connected.



Thanks in advance.













Re: Station Playlist AddOn Question

Joshua Tubbs
 

Studio version is 5.31, latest addon version.

I figured out how to get it working though, I just have to be in the
list of encoders to press the hotkeys.

On 8/7/19, Joseph Lee <@joslee> wrote:
Hi,
Is this with the add-on installed? If yes, what is the add-on version you've
got and Studio version in use?
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joshua Tubbs
Sent: Wednesday, August 7, 2019 4:12 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station Playlist AddOn Question

I have SPL open with the encoder focused. Pressing F11 does/says nothing
here.

F9 also does not do anything.

Is there a way to have the MP3 recorder start up on connect as well as to
start playing the checked tracks, like Jaws and Hartgens scripts do?



On 8/7/19, Joseph Lee <@joslee> wrote:
Hi,

I think he meant configuring that option, which can be done from
encoders window only as this is specific to encoders. The F11 command
will not let you switch to Studio from anywhere - it is a toggle
command to tell NVDA to switch to Studio when the selected encoder
connects.

Cheers,

Joseph



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Roger
Stewart
Sent: Wednesday, August 7, 2019 1:02 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station Playlist AddOn Question



No. You can be anywhere doing anything and when you are connected, it
will switch to the SPL window if you have that function on.

Roger

























On 8/7/2019 2:36 PM, Dan Kerstetter wrote:

Hello all.



Do I need to be in the studio window or the encoder window to use the
additional commands for SAM and SPL encoders? I want to use f11 to
switch automatically to the studio window when I'm connected.



Thanks in advance.













Golden Cursor and knowing what is under the mouse as it moves?

Joshua Tubbs
 

Hi all,

So I am experimenting with NVDA, attempting to start playing Granblue Fantasy
http://game.granbluefantasy.jp/

with it. While the game is not accessible and/or designed for the
blind, I figured that Golden Cursor would be able to help us navigate
to the options on that page that are not links, buttons or any element
NVDA can detect, E.G. continue and new game respectively. By default,
when moving the mouse only mouse positions are reported. How do I know
what is located under the mouse while moving it with mouse arrows on?

I'm new to the addon, so sorry if I'm missing something obvious.

Re: winamp

Gene
 

The person wants names to automatically be announced when you move to the next song, in other words, the next clip.  I suspect there are other cases in which people would want the title bar to be automatically read when text in it changes, but I can't think of any myself.  I think that consideration should be given to the question of whether this should be an NVDA capability that can be turned on and off, automatically reading the title bar when it changes.
 
Gene

----- Original Message -----
Sent: Friday, August 09, 2019 12:25 PM
Subject: Re: [nvda] winamp

Hi Group,

I'm not quite sure what the issue is here.  If you run Winamp and press
the keystroke insert + T, the title of the song and artist will be read
as it appears in the tag editor. If the tags are blank, the file name
will be read without the .mp3 or .wav extension.


On 8/9/2019 6:09 AM, Lisa P Geibel wrote:
> Hi,
>
> Good luck with that and if there ever is a way, please let us know?
> Thanks.
>
> Lisa P. Geibel
> For Mine and Marcus's Christian and Messianic audio show, call
> 631-403-1002 and press 9997 for that show.
> For Marcus's Big Brother breaking news and shows, call the same number
> above, but press 9998 for that show.
> For either show, once you're in, press 1, then 0
> If you want to hear previous shows, after dialing the above phone
> number and choosing which show you want, press 2.
> We'd love to hear from anyone about these shows and thank you for
> listening.
> email:
>  lisapgeibel429@...
> Twitter:
> LisaLisa429
> Facebook:
> m.facebook.com/ldporter1
> May YHWH bless you all
>
> On 8/9/2019 5:45 AM, Robert Doc Wright godfearer wrote:
>>
>> I am hoping to put a bug in the developers ears. I use to be able to
>> do this in Jaws. I would love to be able to picture frame the track
>> title and artist so that as the field changes it is automatically
>> announced.
>>
>> If all I have left in this world is God, I have everything!
>>                 Sent from Mail
>> <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>
>> *From: *Lisa P Geibel <mailto:lisapgeibel429@...>
>> *Sent: *Friday, August 9, 2019 2:30 AM
>> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>> *Subject: *Re: [nvda] winamp
>>
>> Hi,
>>
>> My husband, Marcus is the real Winamp user and he said to his knowledge,
>>
>> the answer to your question is no, but if there is a way, he'd love
>> to know?
>>
>> Lisa P. Geibel
>>
>> For Mine and Marcus's Christian and Messianic audio show, call
>> 631-403-1002 and press 9997 for that show.
>>
>> For Marcus's Big Brother breaking news and shows, call the same
>> number above, but press 9998 for that show.
>>
>> For either show, once you're in, press 1, then 0
>>
>> If you want to hear previous shows, after dialing the above phone
>> number and choosing which show you want, press 2.
>>
>> We'd love to hear from anyone about these shows and thank you for
>> listening.
>>
>> email:
>>
>>   lisapgeibel429@...
>>
>> Twitter:
>>
>> LisaLisa429
>>
>> Facebook:
>>
>> m.facebook.com/ldporter1
>>
>> May YHWH bless you all
>>
>> On 8/8/2019 12:32 PM, Robert Doc Wright godfearer wrote:
>>
>> >
>>
>> > Is there anything I can do to get NVDA to announce the track title as
>>
>> > the songs change?
>>
>> >
>>
>> > If all I have left in this world is God, I have everything!
>>
>> >                 Sent from Mail
>>
>> > <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>
>> >
>>
>> >
>>
>>
>
>
>
>

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"



Re: NVDA add-on feature idea: Settings ring style option for Developer toolkit

Ralf Kefferpuetz
 

I’m fine just the way it works now.

 

Cheers,

  Ralf

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Andy B.
Sent: Freitag, 9. August 2019 16:04
To: nvda@nvda.groups.io
Subject: [nvda] NVDA add-on feature idea: Settings ring style option for Developer toolkit

 

Hi,

 

I am curious, what would DTK users think about having a settings ring style option while using the add-on? My thought is this: When DTK features are enabled, pressing control+s turns on a settings ring style option where you could left/right arrow through the available settings. While on a setting such as detailed messages, pressing up/down arrow cycles through the available options. In the case of detailed messages, the options are enabled or disabled. Pressing control+s again will then turn the settings ring off, returning control back to other DTK features. Let me know what you think over the weekend. This will be another major undertaking because it will modify the entire infrastructure for the entire add-on.

 

Andy Borka

Accessibility advocate for blind and visually impaired software developers

Re: winamp

Ron Canazzi
 

Hi Group,

I'm not quite sure what the issue is here.  If you run Winamp and press the keystroke insert + T, the title of the song and artist will be read as it appears in the tag editor. If the tags are blank, the file name will be read without the .mp3 or .wav extension.

On 8/9/2019 6:09 AM, Lisa P Geibel wrote:
Hi,

Good luck with that and if there ever is a way, please let us know? Thanks.

Lisa P. Geibel
For Mine and Marcus's Christian and Messianic audio show, call 631-403-1002 and press 9997 for that show.
For Marcus's Big Brother breaking news and shows, call the same number above, but press 9998 for that show.
For either show, once you're in, press 1, then 0
If you want to hear previous shows, after dialing the above phone number and choosing which show you want, press 2.
We'd love to hear from anyone about these shows and thank you for listening.
email:
 lisapgeibel429@...
Twitter:
LisaLisa429
Facebook:
m.facebook.com/ldporter1
May YHWH bless you all

On 8/9/2019 5:45 AM, Robert Doc Wright godfearer wrote:

I am hoping to put a bug in the developers ears. I use to be able to do this in Jaws. I would love to be able to picture frame the track title and artist so that as the field changes it is automatically announced.

If all I have left in this world is God, I have everything!                 Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

*From: *Lisa P Geibel <mailto:lisapgeibel429@...>
*Sent: *Friday, August 9, 2019 2:30 AM
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *Re: [nvda] winamp

Hi,

My husband, Marcus is the real Winamp user and he said to his knowledge,

the answer to your question is no, but if there is a way, he'd love to know?

Lisa P. Geibel

For Mine and Marcus's Christian and Messianic audio show, call 631-403-1002 and press 9997 for that show.

For Marcus's Big Brother breaking news and shows, call the same number above, but press 9998 for that show.

For either show, once you're in, press 1, then 0

If you want to hear previous shows, after dialing the above phone number and choosing which show you want, press 2.

We'd love to hear from anyone about these shows and thank you for listening.

email:

  lisapgeibel429@...

Twitter:

LisaLisa429

Facebook:

m.facebook.com/ldporter1

May YHWH bless you all

On 8/8/2019 12:32 PM, Robert Doc Wright godfearer wrote:

Is there anything I can do to get NVDA to announce the track title as
the songs change?
If all I have left in this world is God, I have everything!
                Sent from Mail
<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"

Re: a question about attachments in Thunderbird

P. Otter
 

do as follows:
i've had the same problem.
solution
press alt o to open the message.
then press alt e
after that press e
than you see all the attachments.

cheers
paul otter


Op 9-8-2019 om 18:36 schreef Scott Berry:

Hello there,


I was wondering is there a setting in the Thunderbird or Mozilla add-on to turn on the attachments.  What I mean is I am not getting thrown in to the list of the attachments nor are they getting read.  Just wondering if there are some tweaks I can do to fix this or do I need to look at the add-on itself?