Date   

Re: Repeating Alt Text of the current object

Gabbert, Darren <gabbertd@...>
 

Thanks! NVDA + l worked. I got hung up on NVDA + up arrow keeps reading the document title.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Thursday, August 22, 2019 7:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Repeating Alt Text of the current object

 

Hi Darren,


If you press NVDA+up arrow or NVDA+l to read the current line NVDA will read Graphic then whatever the alt text is.

 

Regards

 

Quentin.

 

On Fri, Aug 23, 2019 at 9:57 AM Gabbert, Darren <gabbertd@...> wrote:

When I’m in Microsoft Word and in browse mode I can press g or Shift g to move from image to image. Is there a way to repeat the alt text of the image with focus? I don’t want to shift g and g, because I’m building a tutorial and don’t want the confusion.

Thanks!

Darren

 

Darren Gabbert
Sr. Business Operations Associate
Adaptive Computing Technology Center
University of Missouri Division of IT
N-17 Memorial Union
Columbia, MO 65211
Phone: (573) 673-5629
Fax:  (314) 594-9909
Darren@...

 


 

--

Quentin Christensen
Training and Support Manager

 


Re: NVDA pronouncing cups as Cuban Pesos

Tyler Spivey
 

The reason it does this is because the screen reader isn't giving the synth enough information to figure out what you meant.

Usually, you say 2 cups. That's fine. For the case of 1/2 cup, 1/2 is a fraction, and the synth knows this:
In the python console:

t=wx.CallLater(500, speech.getSynth().speak, [u'1/2 cup'])

However, NVDA's symbol settings are set to send the / as a word, so it fails in this case.

On 8/22/2019 5:12 PM, Brian Vogel wrote:
Quentin,
         Specific question:  Was it only cup, or cups, or both that said "Cuban Pesos."     For me it is only ever the singular.  And in this recipe specifically coming after a fraction not represented as a fractional character but as digit one slash digit two.
          I am using Microsoft David.
          And, both in pure snark and serious mode, you could probably count on your hands and toes the number of contexts where "cup" is stated as Cuban Pesos in the English speaking world where that would be correct.  That's what makes the synth choice all the more bizarre.
--
Brian *-*Windows 10 Pro, 64-Bit, Version 1903, Build 18362
*The color of truth is grey.*
           ~ André Gide


Re: NVDA pronouncing cups as Cuban Pesos

Quentin Christensen
 

Good question Brian, it was only the 1/2 cup not the 2 cups.  I just tried writing:
1/2 cup
1 cup
2 cup
2 cups
1/2 cups
the cups
the cup

and Zira and David only read the first line and the 2 cup line as cuban pesos.

On Fri, Aug 23, 2019 at 10:12 AM Brian Vogel <britechguy@...> wrote:
Quentin,

         Specific question:  Was it only cup, or cups, or both that said "Cuban Pesos."     For me it is only ever the singular.  And in this recipe specifically coming after a fraction not represented as a fractional character but as digit one slash digit two.

          I am using Microsoft David.

          And, both in pure snark and serious mode, you could probably count on your hands and toes the number of contexts where "cup" is stated as Cuban Pesos in the English speaking world where that would be correct.  That's what makes the synth choice all the more bizarre.
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 



--
Quentin Christensen
Training and Support Manager


Re: NVDA pronouncing cups as Cuban Pesos

Mary Otten
 

I haven’t chimed into this discussion, because I am not at home and us can’t access my PC. But I to have encountered a very annoying Cuban pesos problem, and I am not using a 1 core voice. My preferred voice is the James voice from my Kurzweil 1000 CD. But I know that this voice is also available in other places. I’m trying desperately to remember who actually produces it, and I’m coming up blank. I think I have also seen this problem with the voices fromIvona, but I’m not even sure you can get licenses for those anymore. I still have one and still use it. But it is definitely a problem with the James voice. And that is a sappy five voice.



On Aug 22, 2019, at 5:00 PM, Quentin Christensen <quentin@...> wrote:

I just tried on that recipe, and reading the ingredients, with Microsoft Zira, 1/2 cup white wine is read as "cuban pesos".  If I change to Microsoft George or Catherine or several others, it reads the amount of wine correctly.  I know the different OneCore voices are installed with different language packs in Windows - because they're just names, I can never remember which comes with which.  I know Catherine is the Australian voice, so maybe they assumed not many Australian's would be dealing in Cuban Pesos, compared to folk in the US?

On Fri, Aug 23, 2019 at 4:41 AM Brian Vogel <britechguy@...> wrote:
Suzy,

      I just did the default dictionary entry using cup/Cup as described earlier, and made sure to make the context "Whole Word" at the end of the dialog, as I don't want, say, "cupid" mispronounced, and it definitely works.   I used the webpage you reference for testing.

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 



--
Quentin Christensen
Training and Support Manager


Re: NVDA pronouncing cups as Cuban Pesos

 

Quentin,

         Specific question:  Was it only cup, or cups, or both that said "Cuban Pesos."     For me it is only ever the singular.  And in this recipe specifically coming after a fraction not represented as a fractional character but as digit one slash digit two.

          I am using Microsoft David.

          And, both in pure snark and serious mode, you could probably count on your hands and toes the number of contexts where "cup" is stated as Cuban Pesos in the English speaking world where that would be correct.  That's what makes the synth choice all the more bizarre.
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 


Repeating Alt Text of the current object

Gabbert, Darren <gabbertd@...>
 

When I’m in Microsoft Word and in browse mode I can press g or Shift g to move from image to image. Is there a way to repeat the alt text of to image with focus? I don’t want to shift g and g, because I’m building a tutorial and don’t want the confusion.

Thanks!

Darren

 

Darren Gabbert
Sr. Business Operations Associate
Adaptive Computing Technology Center
University of Missouri Division of IT
N-17 Memorial Union
Columbia, MO 65211
Phone: (573) 673-5629
Fax:  (314) 594-9909
Darren@...

 


Re: Repeating Alt Text of the current object

Quentin Christensen
 

Hi Darren,

If you press NVDA+up arrow or NVDA+l to read the current line NVDA will read Graphic then whatever the alt text is.

Regards

Quentin.

On Fri, Aug 23, 2019 at 9:57 AM Gabbert, Darren <gabbertd@...> wrote:

When I’m in Microsoft Word and in browse mode I can press g or Shift g to move from image to image. Is there a way to repeat the alt text of the image with focus? I don’t want to shift g and g, because I’m building a tutorial and don’t want the confusion.

Thanks!

Darren

 

Darren Gabbert's signature 3

Darren Gabbert
Sr. Business Operations Associate
Adaptive Computing Technology Center
University of Missouri Division of IT
N-17 Memorial Union
Columbia, MO 65211
Phone: (573) 673-5629
Fax:  (314) 594-9909
Darren@...
Division of IT Logo

 



--
Quentin Christensen
Training and Support Manager


Re: NVDA pronouncing cups as Cuban Pesos

Quentin Christensen
 

I just tried on that recipe, and reading the ingredients, with Microsoft Zira, 1/2 cup white wine is read as "cuban pesos".  If I change to Microsoft George or Catherine or several others, it reads the amount of wine correctly.  I know the different OneCore voices are installed with different language packs in Windows - because they're just names, I can never remember which comes with which.  I know Catherine is the Australian voice, so maybe they assumed not many Australian's would be dealing in Cuban Pesos, compared to folk in the US?


On Fri, Aug 23, 2019 at 4:41 AM Brian Vogel <britechguy@...> wrote:
Suzy,

      I just did the default dictionary entry using cup/Cup as described earlier, and made sure to make the context "Whole Word" at the end of the dialog, as I don't want, say, "cupid" mispronounced, and it definitely works.   I used the webpage you reference for testing.

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 



--
Quentin Christensen
Training and Support Manager


Repeating Alt Text of the current object

Gabbert, Darren <gabbertd@...>
 

When I’m in Microsoft Word and in browse mode I can press g or Shift g to move from image to image. Is there a way to repeat the alt text of the image with focus? I don’t want to shift g and g, because I’m building a tutorial and don’t want the confusion.

Thanks!

Darren

 

Darren Gabbert
Sr. Business Operations Associate
Adaptive Computing Technology Center
University of Missouri Division of IT
N-17 Memorial Union
Columbia, MO 65211
Phone: (573) 673-5629
Fax:  (314) 594-9909
Darren@...

 


Re: setting Firefox as default browser using NVDA

 

On Thu, Aug 22, 2019 at 06:13 PM, Luke Davis wrote:
I am not Brian, but I can clarify that for you. It is, in fact, the exact opposite of what you thought. A restart brings Windows down, then restarts it from the ground up. These days, shutdown actually just puts your system into a hibernation mode (a more inactive form of sleep mode), and never really shuts it down. Therefore, restart is the more effective way to be sure Windows actually shuts down and comes back up.
Yep.   The most inane and counterintuitive change Microsoft introduced.   I have nothing against the Fast Startup, per se, but I do have a huge problem with how people can and do believe that doing a shutdown does exactly what it says.   If they wanted a separate form of Hibernation, which is what Fast Startup does (it only saves the OS system state out to disk, full hibernation does that along with the user state(s) for all user(s) active at the time), they should have called it something like Slumber.

The first thing I do when configuring a new Windows 10 system is to turn Fast Startup off.  When, not if, but when a corruption in the hiberfile occurs your system can have some of the most bizarre behaviors that make absolutely no sense.  And the multi-hour tail chasing I did once to determine this when working with one of my clients in a community college setting, trying to figure out why his keyboard would not work right (and, thus, neither did JAWS) I never wanted to do it again.

On systems with SSDs the decrease in boot times when it's off are imperceptible.  On regular HDD it's not that much longer to boot from scratch, and well worth it in my opinion.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 


Re: Does anyone know much about accessiBe?

Blaster
 

Sam, This product is designed to work with all screen readers so it's
not necessarily a NVDA topic. But to answer your query quickly, this
isn't for designing websites, it's a quick fix for existing websites
that need to protect themselves against ADA lawsuits. If you have a
large website and no website programmers in-house, this is a down and
dirty quick fix at an extremely high yearly cost. If you have any
questions just hit me up off list.

HTH,
Blaster

On 8/21/19, Sam Bushman <libertyroundtable@...> wrote:
Hi All,



I am trying to learn how good and compliant this solution is for web
development etc.



What is accessiBe?

accessiBe is the first and only AI-powered solution that is revolutionizing
the

industry by making web accessibility simple, automatic, immediate and

affordable, in compliance with the WCAG 2.1, ADA, Section 508 and other

worldwide legislation.

AI being applied for web accessibility applications is a revolutionary
concept.



Accessible.com



Any info would be most appreciated.



Thanks,

Sam







Re: setting Firefox as default browser using NVDA

Luke Davis
 

All true, although I didn't think it necessary to get into in answering the specific question.
That said, if the topic interests anyone, here is a pretty comprehensive (and recent) article about it, why you should/shouldn't do it, and how to change it.

https://www.windowscentral.com/how-disable-windows-10-fast-startup

Luke

On Thu, 22 Aug 2019, Gene wrote:

If fast boot is disabled, shutdown will completely shut down the computer.  If I had Windows 10 and had fast boot on, I would still do a restart from time
to time to avoid instability caused by Windows not fully ever shutting down.  How often you would do this, you can experiment to find out.  But if you don't
want to experiment, I would think four or five day intervals would be good.  But you may have stability and performance problems sooner or later so you may
want to experiment.
 
Gene
----- Original Message -----
From: Luke Davis
Sent: Thursday, August 22, 2019 5:13 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] setting Firefox as default browser using NVDA
On Thu, 22 Aug 2019, Cearbhall O'Meadhra wrote:

I used “Restart” as the shutdown procedure. Should I have used “shutdown” instead? I have a feeling that I read something about the Shutdown procedure
closing all windows routines but the Restart does not do so. I would be glad if you could clarify this for me.
I am not Brian, but I can clarify that for you. It is, in fact, the exact
opposite of what you thought. A restart brings Windows down, then restarts it
from the ground up. These days, shutdown actually just puts your system into a
hibernation mode (a more inactive form of sleep mode), and never really shuts it
down. Therefore, restart is the more effective way to be sure Windows actually
shuts down and comes back up.

When I type a web address into the windows search box, the web page always comes up in EDGE! How can I change that default behavior to Firefox? Edge is
listed in the potential default apps but is not checked as the default, Firefox is.
I don't know how to (or if you can) fix that, but if you use windows+r (the run
dialog) to type your web addresses, they should open in the default browser.
Luke


Re: setting Firefox as default browser using NVDA

Gene
 

If fast boot is disabled, shutdown will completely shut down the computer.  If I had Windows 10 and had fast boot on, I would still do a restart from time to time to avoid instability caused by Windows not fully ever shutting down.  How often you would do this, you can experiment to find out.  But if you don't want to experiment, I would think four or five day intervals would be good.  But you may have stability and performance problems sooner or later so you may want to experiment.
 
Gene

----- Original Message -----
From: Luke Davis
Sent: Thursday, August 22, 2019 5:13 PM
Subject: Re: [nvda] setting Firefox as default browser using NVDA

On Thu, 22 Aug 2019, Cearbhall O'Meadhra wrote:

> I used “Restart” as the shutdown procedure. Should I have used “shutdown” instead? I have a feeling that I read something about the Shutdown procedure
> closing all windows routines but the Restart does not do so. I would be glad if you could clarify this for me.

I am not Brian, but I can clarify that for you. It is, in fact, the exact
opposite of what you thought. A restart brings Windows down, then restarts it
from the ground up. These days, shutdown actually just puts your system into a
hibernation mode (a more inactive form of sleep mode), and never really shuts it
down. Therefore, restart is the more effective way to be sure Windows actually
shuts down and comes back up.

> When I type a web address into the windows search box, the web page always comes up in EDGE! How can I change that default behavior to Firefox? Edge is
> listed in the potential default apps but is not checked as the default, Firefox is.

I don't know how to (or if you can) fix that, but if you use windows+r (the run
dialog) to type your web addresses, they should open in the default browser.

Luke




Re: Nvda on Usb

Kevin Cussick
 

well yes, quite. this is what I do but I think Brian was maybe saying that nvda should buy default make a folder where ever you extract and buy default call it nvda.

On 22/08/2019 22:32, Luke Davis wrote:
On Thu, 22 Aug 2019, Brian Vogel wrote:

But knowing how
NVDA behaves when creating a portable copy, I don't ever create those on a drive where I already have lots of other data, as picking up all the pieces and
sweeping them into a dedicated NVDA folder becomes much more difficult. Instead, I create that portable copy on a blank drive, create an NVDA folder on
the drive where I actually want it, then copy over the content from the other drive with a simple "select all/CTRL+A" to get it all at once.
I don't understand. When creating a portable copy, the prompt says:
To create a portable copy of NVDA, please select the path and other options.
Portable directory:
At that point, you can just enter f:\nvda (if your USB disk was on drive F:), or whatever, and NVDA would be installed to that folder.
Why do you have to pick up any pieces, move them around, etc.?
Luke
On Thu, 22 Aug 2019, Brian Vogel wrote:

On Thu, Aug 22, 2019 at 10:17 AM, Gene wrote:
      But to keep files from being splattered on the drive without a folder, I think its better to have the files in a folder.  If you don't, they
      will be on the root of the drive or thumb drive.

I agree.   Some things that create portable copies also create a dedicated folder for same, others don't, and NVDA doesn't.If I intend to have a portable
copy of NVDA on a drive where I want lots of other stuff, I do as you've said elsewhere, create an NVDA folder, and move everything there.But knowing how
NVDA behaves when creating a portable copy, I don't ever create those on a drive where I already have lots of other data, as picking up all the pieces and
sweeping them into a dedicated NVDA folder becomes much more difficult.   Instead, I create that portable copy on a blank drive, create an NVDA folder on
the drive where I actually want it, then copy over the content from the other drive with a simple "select all/CTRL+A" to get it all at once.This is a "live
and learn" situation with each and every piece of portable software, depending on the behavior of what creates it. --

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362

The color of truth is grey.

           ~ André Gide








Re: setting Firefox as default browser using NVDA

Luke Davis
 

On Thu, 22 Aug 2019, Cearbhall O'Meadhra wrote:

I used “Restart” as the shutdown procedure. Should I have used “shutdown” instead? I have a feeling that I read something about the Shutdown procedure
closing all windows routines but the Restart does not do so. I would be glad if you could clarify this for me.
I am not Brian, but I can clarify that for you. It is, in fact, the exact opposite of what you thought. A restart brings Windows down, then restarts it from the ground up. These days, shutdown actually just puts your system into a hibernation mode (a more inactive form of sleep mode), and never really shuts it down. Therefore, restart is the more effective way to be sure Windows actually shuts down and comes back up.

When I type a web address into the windows search box, the web page always comes up in EDGE! How can I change that default behavior to Firefox? Edge is
listed in the potential default apps but is not checked as the default, Firefox is.
I don't know how to (or if you can) fix that, but if you use windows+r (the run dialog) to type your web addresses, they should open in the default browser.

Luke


Re: setting Firefox as default browser using NVDA

Cearbhall O'Meadhra
 

Brian,

 

I was intrigued by your recent discussion and so I had a go at changing my default browser from Chrome to Firefox. At first, it did not hold. But after two more attempts it did take.

 

I used Restart as the shutdown procedure. Should I have used shutdown instead? I have a feeling that I read something about the Shutdown procedure closing all windows routines but the Restart does not do so. I would be glad if you could clarify this for me.

 

After the second attempt, Firefox is now my default browser. My HTML files open in Firefox, as you would expect.

 

When I type a web address into the windows search box, the web page always comes up in EDGE! How can I change that default behaviour to Firefox? Edge is listed in the potential default apps but is not checked as the default, Firefox is.

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Thursday, August 22, 2019 10:37 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] setting Firefox as default browser using NVDA

 

On Thu, Aug 22, 2019 at 05:16 PM, Gene wrote:

I suspect this is such a problem and I believe I recall cases from many years ago, where you couldn't switch default browsers directly from one to another if you were running one specific browser and tried to switch to another specific browser.

Not that I doubt this, and it prompted me to test under Windows 10, Version 1903, Build 18362.295, and it does not occur.

I've switched the default browser app while all of the browsers are open and browsing, and when I activate a link in a standalone e-mail client, Thunderbird in this case, whatever I last set comes up.

This is not meant to start an argument, but probably will:  There are lots of behaviors that I am so familiar with "normal" that "atypical" just screams out at me.  The behavior described is highly atypical under Windows 10, and I prefer to take steps that address likely underlying corruption quickly.  Particularly when there's not a downside (or a significant chance of one) in doing so.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 


Re: Nvda on Usb

 

On Thu, Aug 22, 2019 at 05:32 PM, Luke Davis wrote:
At that point, you can just enter f:\nvda (if your USB disk was on drive F:), or whatever, and NVDA would be installed to that folder.
Yes, you could.  You could also activate the browse button and navigate to a chosen folder.

But it's blank by default, and a great many people browse to the drive they want to use, and that's it.   There are lots of "browse" options in cases like this that would automatically post-pend the NVDA part, which a user would need to remove if they didn't want that folder.

People (and I include myself) are lazy and will most often take what the software does after a minimum of picking.   There are other factors involved, too.   Were the NVDA "create portable" always to create a dedicated NVDA folder on the destination device (even if that device were an existing folder) this would be a moot point.

I know what I observe happening "in the wild" and I know it won't likely change.   In this case a simple programming change could alleviate the issue.  It's all a matter of what one wants, and at least mentioning it.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 


Re: setting Firefox as default browser using NVDA

 

On Thu, Aug 22, 2019 at 05:16 PM, Gene wrote:
I suspect this is such a problem and I believe I recall cases from many years ago, where you couldn't switch default browsers directly from one to another if you were running one specific browser and tried to switch to another specific browser.
Not that I doubt this, and it prompted me to test under Windows 10, Version 1903, Build 18362.295, and it does not occur.

I've switched the default browser app while all of the browsers are open and browsing, and when I activate a link in a standalone e-mail client, Thunderbird in this case, whatever I last set comes up.

This is not meant to start an argument, but probably will:  There are lots of behaviors that I am so familiar with "normal" that "atypical" just screams out at me.  The behavior described is highly atypical under Windows 10, and I prefer to take steps that address likely underlying corruption quickly.  Particularly when there's not a downside (or a significant chance of one) in doing so.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 


Re: Nvda on Usb

Luke Davis
 

On Thu, 22 Aug 2019, Brian Vogel wrote:

But knowing how
NVDA behaves when creating a portable copy, I don't ever create those on a drive where I already have lots of other data, as picking up all the pieces and
sweeping them into a dedicated NVDA folder becomes much more difficult. Instead, I create that portable copy on a blank drive, create an NVDA folder on
the drive where I actually want it, then copy over the content from the other drive with a simple "select all/CTRL+A" to get it all at once.
I don't understand. When creating a portable copy, the prompt says:

To create a portable copy of NVDA, please select the path and other options.
Portable directory:

At that point, you can just enter f:\nvda (if your USB disk was on drive F:), or whatever, and NVDA would be installed to that folder.

Why do you have to pick up any pieces, move them around, etc.?

Luke


On Thu, 22 Aug 2019, Brian Vogel wrote:

On Thu, Aug 22, 2019 at 10:17 AM, Gene wrote:
But to keep files from being splattered on the drive without a folder, I think its better to have the files in a folder.  If you don't, they
will be on the root of the drive or thumb drive.
I agree.   Some things that create portable copies also create a dedicated folder for same, others don't, and NVDA doesn't.If I intend to have a portable
copy of NVDA on a drive where I want lots of other stuff, I do as you've said elsewhere, create an NVDA folder, and move everything there.But knowing how
NVDA behaves when creating a portable copy, I don't ever create those on a drive where I already have lots of other data, as picking up all the pieces and
sweeping them into a dedicated NVDA folder becomes much more difficult.   Instead, I create that portable copy on a blank drive, create an NVDA folder on
the drive where I actually want it, then copy over the content from the other drive with a simple "select all/CTRL+A" to get it all at once.This is a "live
and learn" situation with each and every piece of portable software, depending on the behavior of what creates it. --
Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  
The color of truth is grey.
           ~ André Gide
 
 


Re: setting Firefox as default browser using NVDA

Gene
 

But this may be nothing but one isolated incident, perhaps caused by a problem when you have one browser set as default and try to switch directly to another specific browser.  If no other problems exist, or they are so minor that they don't matter, there is no reason to do anything.
 
I suspect this is such a problem and I believe I recall cases from many years ago, where you couldn't switch default browsers directly from one to another if you were running one specific browser and tried to switch to another specific browser.
 
Gene

----- Original Message -----
Sent: Thursday, August 22, 2019 4:07 PM
Subject: Re: [nvda] setting Firefox as default browser using NVDA

On Thu, Aug 22, 2019 at 05:01 PM, Dan Beaver wrote:
Ok, now this is just crazy.
Seriously, this is exactly the sort of OS eccentricity that calls out for Doing a Windows 10 Repair Install or Feature Update Using the Windows 10 ISO file

 


I agree it's crazy/bizarre, which suggests something is wrong in your Windows 10 instance.   Repair installs are simple to do, and knock out an awful lot of potential problems in one fell swoop.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 

36541 - 36560 of 100970