Date   
Re: New add-on for Brother Utilities app

P. Otter
 

hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:

Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


Às 21:53 de 18/09/2019, Robert Logue escreveu:
Thanks Shaun. I downloaded the add on. I just don't know how to install it.  Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup.  I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:
you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:
Hello Rui.  I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:
Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.







Re: THE WEATHER 7.1 ADDON

Stephen Thacker
 

Hi, I don’t know, it was the one that I installed when first installing NVDA. If I need to know please tell me how to find out the synthesiser?

 

Cheers, Steve

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 23 September 2019 09:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi Steve

What synthesizer are you using?

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 23 September 2019 02:09
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi, I have setup the Weather Plus with my city and all the other options I wish to be read within the forecast. However when I press NVDA key with w nothing happens at all so what is the remedy please?

 

Thanks for any help, Steveh

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days

 

If you try pressing NVDA+w and you get an error saying the WOE Id is missing, you need to set a location, as follows:

 

1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName, PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button and press it to read the location details.

8. you can set the location as  the Preset default or simply add to your list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in the forecast for your location.

10. When done, tab to OK and press enter

 

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON

 

Hi, when I arrived home late last night, Saturday, I switched on my pc which uses Windows 10 64 bit and the latest version of NVDA and it asked me if I wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc, but how do I use this addon, ie what keys do I press to get results please?

 

Thanks for any help, Steve Thacker from the UK.

 

Sent from Mail for Windows 10

 

 

 

Re: Weather_Plus7.1 update available

Adriano Barbieri
 

Hi Chris,


No, it overwrites it.
The error in Betsy's log indicated lines not consistent with the reported error, which I remember already having solved some time ago in some previous version.
I don't know how it is possible, but surely, without knowing it, it is using an old version even if it says to read that it is 7.1.
This is why I advised you to uninstall it and clean% temp from every old add-on file.

Regards
Adriano


Il 23/09/2019 10:47, Chris Mullins ha scritto:

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 

Accessing the formatting options in gmail's basic HTML view

ss sarfudeen
 

Dear list members,

As the subject line indicates, I would like to know if it is possible
to access the formatting options while composing an new email using
the gmail's basic HTML view as it is in the standard view. Please let
me know if this feature is available and if so, the key commands to
get to the formatting options and apply the desired changes in the
body of the email.
Your assistance/guidance is highly appreciated.

With thanks and regards,

Sultana

Re: NVDA and accessible kindle book

Bianka Brankovic
 

Hello Mary,

I cannot reproduce the behavior with one of my Kindle books on pc. However, I know that the accessibility features can behave differently whether you are accessing a Kindle book with an Iphone or a pc.

Have you tried switching off the TTS with Ctrl-t? Does this have an affect on NVDA?

Also, I have read somewhere that Kindle for pc needs enhanced type setting enabled in order for the accessibility features to work.

Just my two cents.

Kind regards,

Bianka

Re: learning python or any other programing language with nvda

 

Hi

I currently studying this book: https://greenteapress.com/wp/think-python-2e/

This is not the book written for blind user, but I think it is understanndable. Google search for pythonvis a mailing list for blind people who want to learn programming with Python.

Cuong


On 9/23/2019 3:53 PM, azeesh rahman wrote:

Hi. I need to learn the language from scratch.

 

Re: learning python or any other programing language with nvda

azeesh rahman <ajrahman1144@...>
 

Hi. I need to learn the language from scratch.

 

Re: Weather_Plus7.1 update available

Chris Mullins
 

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 

Re: learning python or any other programing language with nvda

 

Hi

Can you tell the community what you learn Python for? I think that would make us to give suggestion more easier

Cuong.

On 9/23/2019 3:40 PM, azeesh rahman wrote:

hi. i was wondering how can i start to learn a programming language at my own pace with NVDA. please help me to feed my coding hunger. any material or website will be absolutely fine.
the the information is coming from  windows 10 - 64 bit.

learning python or any other programing language with nvda

azeesh rahman <ajrahman1144@...>
 

hi. i was wondering how can i start to learn a programming language at my own pace with NVDA. please help me to feed my coding hunger. any material or website will be absolutely fine.
the the information is coming from  windows 10 - 64 bit.

Re: THE WEATHER 7.1 ADDON

Chris Mullins
 

Hi Steve

What synthesizer are you using?

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 23 September 2019 02:09
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi, I have setup the Weather Plus with my city and all the other options I wish to be read within the forecast. However when I press NVDA key with w nothing happens at all so what is the remedy please?

 

Thanks for any help, Steveh

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days

 

If you try pressing NVDA+w and you get an error saying the WOE Id is missing, you need to set a location, as follows:

 

1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName, PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button and press it to read the location details.

8. you can set the location as  the Preset default or simply add to your list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in the forecast for your location.

10. When done, tab to OK and press enter

 

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON

 

Hi, when I arrived home late last night, Saturday, I switched on my pc which uses Windows 10 64 bit and the latest version of NVDA and it asked me if I wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc, but how do I use this addon, ie what keys do I press to get results please?

 

Thanks for any help, Steve Thacker from the UK.

 

Sent from Mail for Windows 10

 

 

Re: Google G suite with nvda

hurrikennyandopo ...
 

Hi Bianka


Thanks for letting me know I passed on what you said to one of my blind friends.


I am not sure if he was still using jaws but inquired about it for a nvda user I think he uses nvda also but has the shark at work but works withwhat works the best.


Gene nz


On 20/09/2019 6:34 PM, Bianka Brankovic wrote:

Hi all,

 

I tested GSuite as the company where I work is considering using it.

 

I found no differences regarding accessibility of Google Mail, Sheets or Docs. Now, I haven’t really done a test of all the functions and there might be some differences to the non-business versions but they weren’t apparent while I tried it.

 

Thanks and kind regards,

 

Bianka

 

 

Thanks and kind regards,

 

Bianka

 

 

--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Re: ALVA 544 Satellite Traveller braille display with NVDA

hurrikennyandopo ...
 

Hi,


RE: RS-232 to USB 2.0 cable for a braille display.

Sorry about that, I just realised that I hadn't emailed you the link I promised from Ebay!

Anyhow, this guy sells both the female cable and the male cable. On the back of my braille note it is a male connection, so I bought the female RS-232 to USB 2.0 cable to go on there.

It also came with a driver mini CD which works on my Windows 10 operating system.

I just use it as a braille display, rather than a note taker.

Here is the link https://www.ebay.com/itm/RS-232-Serial-to-USB-2-0-PL2303-Cable-Adapter-Converter-For-Win-7-8-MAC-OS-AU/143028406760?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649


I know that when I enquired here at PBTech (in New Zealand) they only had a male RS-232 to USB cable, but apparently I could have bought an adapter for $10 to change it to female.


I have just had another quick look on Ebay for you. It seems that they also sell the RS-232 gender changers if you wanted to adapt the cable you already have. Sometimes though it is just as easy to get the proper cable already done. I have been happy with the ones that I purchased. They are also nice and long.

Regards,

Gene


On 23/09/2019 8:31 AM, o.neulinger@... wrote:

Gene from New Zealand, were you able to find that link?

the cable you mentioned that is serial to USb the 2 I brought come with a driver CD that also supports windows 10 that I am using now. It can be brought off ebay for under 10 bucks new zealand with free shipping. I can post a link later on today to one that I got
--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Re: Is there an accessible video editor I can use with NVDA?

Sarah k Alawami
 

I actually was going to suggest reaper, as it only takes about an hour to render about 2 hours of content on a good day or rm. but I'm on a mac.

Whe I use reaper it takes 30 minutes to render 2 hours of content on my windows machine, so I'd say it is yrou processer that is barfing.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 22 Sep 2019, at 13:58, Joshua Tubbs wrote:

Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.

Re: Is there an accessible video editor I can use with NVDA?

 

This is a message I received on this subject elsewhere. Here you go.



Hello,
I tried FreeMake Video Converter using NVDA.
FreeVideoEditor_1.4.56.703_d.exe
https://www.freemake.com/how_to/how_to_cut_video_quickly

1After installing,  Open freeMake Video Converter

2 from the file menu choose add video
3 from the edit menu, choose edit
4 After the video loads,
Press spacebar to play or pause
press Home to move to start
End to go to the end
press ctrl+L to mark the start
ctrl+R to mark the finish
ctrl+Delete to delete the selected part.
5 Next, tab pass the Rotate 90° CW button.
 Now there will be three unlabeled buttons.
Choose the second button and press enter.
6 Tab to get to the desired format, such as, mp4.
Press enter to choose it.
7 Now tab or shift+tab to the convert button and press enter.
A new screen appears with two options:
1 Convert without logo  button
2 Link
choose this link and press enter.
8 After the video is converted, there will be a OK button, press it.
9 There will be a close button, after pressing it, press alt+F4 to exit the program.
You will need to get someone to view your video to let us know if the Logo is on the entire video, or only at the beginning.
Thanks,
Rob





On 9/22/2019 4:58 PM, Joshua Tubbs wrote:
Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.



Re: Is there an accessible video editor I can use with NVDA?

Joshua Tubbs
 

Well, I really wish Replay Media Splitter was accessible right about now.

That app opens videos extremely fast and I can hit play without it
buffering and freezing.

Virtual Dub is just as bad as Reaper with large videos. I open it, hit
space and it buffers like crazy. I'm not sure what to do about it.
When I hit space it says dub in progress and I can't hit any key to
stop it.

Any help would be greatly appreciated. If other video editors open
videos and play them back without any issues it can't be a CPU
problem.

On 9/22/19, Robert Kingett <@blindjourno> wrote:
Check the 2 below links.

1. [The NVDA applications
page.](https://github.com/nvaccess/nvda-community/wiki/Application-Support)
2. [Microsoft
photos.](https://www.microsoft.com/en-us/windows/photo-movie-editor)



Re: Weather_Plus7.1 update available

Betsy Grenevitch
 

This is the link I tried from the email you sent out on Saturday. It still is not working. My daughter thinks the add-on is broken or something. She even looked to see if there were any messages coming up on the screen when it will not allow me to do anything with the cities or settings and nothing is coming up. Did the log I send not show what is going on?


Thanks for all of your help.


If we remoted sometime would that help you see what is going on?



On 9/22/2019 8:59 PM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon


Regards

Adriano



Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.


Betsy from Georgia


-- 
Betsy Grenevitch
678=862-3876

Re: THE WEATHER 7.1 ADDON

Stephen Thacker
 

Hi, I have setup the Weather Plus with my city and all the other options I wish to be read within the forecast. However when I press NVDA key with w nothing happens at all so what is the remedy please?

 

Thanks for any help, Steve

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days

 

If you try pressing NVDA+w and you get an error saying the WOE Id is missing, you need to set a location, as follows:

 

1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName, PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button and press it to read the location details.

8. you can set the location as  the Preset default or simply add to your list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in the forecast for your location.

10. When done, tab to OK and press enter

 

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON

 

Hi, when I arrived home late last night, Saturday, I switched on my pc which uses Windows 10 64 bit and the latest version of NVDA and it asked me if I wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc, but how do I use this addon, ie what keys do I press to get results please?

 

Thanks for any help, Steve Thacker from the UK.

 

Sent from Mail for Windows 10

 

 

Re: Weather_Plus7.1 update available

Adriano Barbieri
 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon


Regards

Adriano



Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.


Betsy from Georgia


Re: excel and headers not working as intended

Quentin Christensen
 

Hi Sally,

From what you described, what you are doing and what we suggested should normally work.  If you can send me offlist a copy of the spreadsheet you are using, I can have a look at that.  If you let me know which lesson in the material you are working on, I can double check that they are in fact correct.

Kind regards

Quentin.

On Sat, Sep 21, 2019 at 1:40 AM Sally Kiebdaj <fiddle.pup@...> wrote:
I am aware of both these points and they do not address the issues I am having. Any other suggestions?

Regards,
Sally

On Thu, Sep 19, 2019 at 6:15 PM Quentin Christensen <quentin@...> wrote:
The other thing to note is that column headers are only announced as you move left or right (between columns), and row headers are only announced as you change rows.  If you have column headers set and press the down arrow - the column hasn't changed so the header isn't read again.

Regards

Quentin.

On Fri, Sep 20, 2019 at 7:21 AM George Kerscher <kerscher@...> wrote:
Hi,

You also need to check the tables , which is the one just before the column and row.

Best
George

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sally Kiebdaj
Sent: Thursday, September 19, 2019 3:01 PM
To: nvda@nvda.groups.io
Subject: [nvda] excel and headers not working as intended

Hello all,

I don't see anything describing my situation in recent conversations so
am starting a new thread.

I'm going through the NVDA excel training and have found that when
following the precise directions in the training, headers are not
reading as it says they should.

I have a set of cells with data. I go to the start of the row that I
want to use as column headers and press NVDA+shift+c.

NVDA announces A2 set as start of column headers. This is correct.

However that header is not read when I navigate through the table.

If I repeat the set column header hotkey, it says that the cell is
already set as the column header. If I press it twice rapidly it says
that the column header is removed.

Everything works as it should right up until I actually start navigating
the table data and do not hear headers spoken.

I am using NVDA 19.2, MS excel 1908 most recent build.

Has anyone else seen this problem? Am I missing something in settings? I
do have the table information checkbox for headers selected in the
document settings of NVDA.

If the instructions in the excel tutorial are missing a step it would be
good to correct that as well.

Thank you in advance for help troubleshooting this.

Warmly,
Sally










--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager