Date   

RH Voice

Roger Stewart
 

I still had the email with the link to the page so I found and installed all the English voices. It is working just fine and sounds promising. One voice sounds very like DecTalk and another kind of like Eloquence but they are all very easy to understand.

Roger


Text Reading Question

Greg Rhodes
 

When I have a numbered list in a MS Word document, NVDA will read the number e.g. 1 followed by my text, and then read the next number in the list e.g. 2. I arrow down a line and I get the number 2 followed by my text and the number 3. What setting do I change to get NVDA to not read the next line number at the end of the previous line? Thanks.

 

Greg

 


Re: Add-on Updater and Resource Monitor 19.10 to be released later today #addonrelease

 

Hi,
That work requires a lot of collaboration and time to do, and there are some high priority work that's being done at the moment. I'm keeping an eye on changes to NVDA source code that will require me to update the client component from time to time.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mr. Wong Chi Wai, William
Sent: Saturday, September 28, 2019 5:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater and Resource Monitor 19.10 to be released later today #AddonRelease

Joseph
I remember sometime before, you mentioned that addon updater will be integrated into NVDA core.
How is this progress? or will it happen?
Thanks.


Joseph Lee 於 28/9/2019 2:31 寫道:
Hi,
Go to addons.nvda-project.org, select Add-on Updater, and download the stable version from the link from that page.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Lenron
Sent: Friday, September 27, 2019 11:29 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater and Resource Monitor 19.10 to be released later today #AddonRelease

could I get the link to the addon updater? I have not been able to find it sense restoring my computer

On 9/27/19, Joseph Lee <@joslee> wrote:
Hi all,



Add-on Updater 19.10 and resource Monitor 19.10 will go out to the
world in a few hours. Add-on Updater 19.10 will now let you check for
updated versions of Debug Helper add-on by Luke Davis and includes new
and updated translations. Resource Monitor 19.10 brings localization
updates and properly recognizes latest Windows Insider Preview build
as Insider Preview build, along with fixing a compatibility issue with Python 3.



As always, when the updates become available, Add-on Updater will
guide you through the update process.



Cheers,

Joseph




--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762






Re: NVDA With RH Voice SAPI5

Roger Stewart
 

Oops! Sorry, I meant where do you get the voices?
Roger









On 9/28/2019 9:28 AM, Roger Stewart via Groups.Io wrote:
Ok, I got the zip file just fine. Where do you get the language files?
Thanks.
Roger









On 9/27/2019 6:21 PM, hurrikennyandopo ... wrote:

Hi


I have zipped the main file and also the language one if needed. I did not add any voices.


I will leave there for 24 hours.


The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.


Gene nz


On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi


the first add on you get is under a heading called nvda it says like main add on and will need to be installed.


then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.


Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.


After the mentioned files have been installed you should be able to see the voices.


You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.


Gene nz







On 27/09/2019 2:23 PM, Richard Wells wrote:
Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:
Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.









--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.




Re: NVDA With RH Voice SAPI5

Roger Stewart
 

Ok, I got the zip file just fine. Where do you get the language files?
Thanks.
Roger









On 9/27/2019 6:21 PM, hurrikennyandopo ... wrote:

Hi


I have zipped the main file and also the language one if needed. I did not add any voices.


I will leave there for 24 hours.


The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.


Gene nz


On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi


the first add on you get is under a heading called nvda it says like main add on and will need to be installed.


then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.


Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.


After the mentioned files have been installed you should be able to see the voices.


You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.


Gene nz







On 27/09/2019 2:23 PM, Richard Wells wrote:
Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:
Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.









--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.



Re: New add-on for Brother Utilities app

Kerryn Gunness
 

ok this is for rui, can you respond to me? i have questions about brother add on
thanks

thanks again paul

----- Original Message -----
From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, September 28, 2019 4:26 AM
Subject: Re: [nvda] New add-on for Brother Utilities app


yes it was a message from Rui Fontes.
because I had purchased a printer of this brand that I responded to.
I wanted to know if there was a solution to read the ink level in NVDA.
that standard very difficult because they indicate the ink level of a chart and not numbers.becouse
cheers
paul otter

Op 27-9-2019 om 23:56 schreef Kerryn Gunness via Groups.Io:
hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app


hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:
Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:
Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:
you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:
Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:
Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.













Re: New add-on for Brother Utilities app

Kerryn Gunness
 

i missed the messages
hense why i am asking
ok

----- Original Message -----
From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, September 28, 2019 3:43 AM
Subject: Re: [nvda] New add-on for Brother Utilities app


yes they say it in a message.
I don't know what I can do with it.
I think it makes brother utilities more accessible.
I have wrote a message to him to explain what it is.
I had also a question about the ink how to know the inklevel.
but no respons anymore back.
cheers
paul otter

Op 27-9-2019 om 23:56 schreef Kerryn Gunness via Groups.Io:
hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app


hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:
Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:
Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:
you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:
Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:
Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.













Re: Add-on Updater and Resource Monitor 19.10 to be released later today #addonrelease

Mr. Wong Chi Wai, William <cwwong.pro@...>
 

Joseph
I remember sometime before, you mentioned that addon updater will be integrated into NVDA core.
How is this progress? or will it happen?
Thanks.


Joseph Lee 於 28/9/2019 2:31 寫道:

Hi,
Go to addons.nvda-project.org, select Add-on Updater, and download the stable version from the link from that page.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Lenron
Sent: Friday, September 27, 2019 11:29 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater and Resource Monitor 19.10 to be released later today #AddonRelease

could I get the link to the addon updater? I have not been able to find it sense restoring my computer

On 9/27/19, Joseph Lee <@joslee> wrote:
Hi all,



Add-on Updater 19.10 and resource Monitor 19.10 will go out to the
world in a few hours. Add-on Updater 19.10 will now let you check for
updated versions of Debug Helper add-on by Luke Davis and includes new
and updated translations. Resource Monitor 19.10 brings localization
updates and properly recognizes latest Windows Insider Preview build
as Insider Preview build, along with fixing a compatibility issue with Python 3.



As always, when the updates become available, Add-on Updater will
guide you through the update process.



Cheers,

Joseph




--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762





Weather_Plus7.2 update available

Adriano Barbieri
 

Hi to every one,


Important changes in this version 7.2:
• Fixed bug after adding a city, if it is the first one entered it if you press ok button and restart the add-on.
• Now the progressdialog show again the time remaining and time elapsed.
• correct Italian translation in the help of the Rename button.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.2.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   


Re: New add-on for Brother Utilities app

P. Otter
 

yes it was a message from Rui Fontes.
    because I had purchased a printer of this brand that I responded to.
I wanted to know if there was a solution to read the ink level in NVDA.
that standard very difficult because they indicate the ink level of a chart and not numbers.becouse
cheers
paul otter

Op 27-9-2019 om 23:56 schreef Kerryn Gunness via Groups.Io:

hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app


hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:
Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:
Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:
you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:
Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:
Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.












a question about Addon Updater

Jarek.Krcmar
 

Hi in this group,

I would like to know, what does the addon Updater do.

What it updates?


--
Jarek


Re: New add-on for Brother Utilities app

P. Otter
 

yes they say it in a message.
I don't know what I can do with it.
I think it makes brother utilities more accessible.
I have wrote a message to him to explain what it is.
I had also a question about the ink how to know the inklevel.
but no respons anymore back.
cheers
paul otter

 Op 27-9-2019 om 23:56 schreef Kerryn Gunness via Groups.Io:

hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app


hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:
Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:
Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:
you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:
Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:
Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.












Re: Pop-up messages in Windows 10

Sile
 

Thank you Sasha,

Sile

On Sep 27, 2019, at 9:49 PM, Sascha Cowley via Groups.Io <sascha.camille=yahoo.com@groups.io> wrote:

Hi,

I can visually confirm that this does indeed make the notifications disappear off screen. Just note that it doesn't actually "clear" the notifications; they'll still be in the action centre.


Regards,
Sascha

On 28/09/2019 10:36, Sile via Groups.Io wrote:
Hi


I think I might have found an answer - could someone who can monitor the status of notifications check it?


win+A - open action center

win+A - closes action center and clears notifications.


Does this indeed work?


--Sile

On 2019-09-27 8:30 p.m., Sile via Groups.Io wrote:
Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile





Playing tracks on Bandcamp.

John Isige
 

Hey all. Anybody know how to play tracks on Bandcamp? For example:


https://sundryitems.bandcamp.com/album/there-where-the-avalanche-stops


I used to highlight a button above a track name, hit numpad-0 and numpad slash together, and then hit numpad slash, and it would play. I've tried that, using numpad plus slash and then numpad plus enter. I've tried getting to a button and hitting NVDA-space and hitting space and enter. Nothing seems to be working. Is this just broken now, or am I missing something?


Re: NVDA With RH Voice SAPI5

hurrikennyandopo ...
 

Hi


You may need to arrow down to download button then either press the space bar or enter key to download the zip file. It only has 2 files in it one been the main add on and the other for language there is no voices in it unless I delete the file and do a new one. I only tried out 2 of the voices in english to see what they were like.


it can be done with those other 2 voices or i could also get the other 2 and add into the zip file.


Gene nz


On 28/09/2019 12:34 PM, Pascal Lambert wrote:

Hi,

I clicked on your drop box link and once I was there I clicked on the file and it did not give me the option to download.  Am I doing something wrong?

Thanks.

Blessings.

Pascal

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of hurrikennyandopo ...
Sent: Friday, September 27, 2019 7:22 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA With RH Voice SAPI5

 

Hi

 

I have zipped the main file and also the language one if needed. I did not add any voices.

 

I will leave there for 24 hours.

 

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

 

Gene nz

 

On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

 

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

 

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

 

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

 

After the mentioned files have been installed you should be able to see the voices.

 

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

 

Gene nz

 

 

 

 

 

 

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel


El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.



 



--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Pop-up messages in Windows 10

Sascha Cowley
 

Hi,

I can visually confirm that this does indeed make the notifications disappear off screen. Just note that it doesn't actually "clear" the notifications; they'll still be in the action centre.


Regards,
Sascha

On 28/09/2019 10:36, Sile via Groups.Io wrote:
Hi


I think I might have found an answer - could someone who can monitor the status of notifications check it?


win+A - open action center

win+A - closes action center and clears notifications.


Does this indeed work?


--Sile

On 2019-09-27 8:30 p.m., Sile via Groups.Io wrote:
Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile




Re: NVDA With RH Voice SAPI5

Richard Wells
 

Thanks for this. I will see if I get any further than I did with what I downloaded. Again SAPI voices work fine.

On 9/27/2019 6:21 PM, hurrikennyandopo ... wrote:

Hi


I have zipped the main file and also the language one if needed. I did not add any voices.


I will leave there for 24 hours.


The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.


Gene nz


On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi


the first add on you get is under a heading called nvda it says like main add on and will need to be installed.


then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.


Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.


After the mentioned files have been installed you should be able to see the voices.


You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.


Gene nz







On 27/09/2019 2:23 PM, Richard Wells wrote:
Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:
Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.









--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Pop-up messages in Windows 10

Sile
 

Hi


I think I might have found an answer - could someone who can monitor the status of notifications check it?


win+A - open action center

win+A - closes action center and clears notifications.


Does this indeed work?


--Sile

On 2019-09-27 8:30 p.m., Sile via Groups.Io wrote:
Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile



Re: NVDA With RH Voice SAPI5

Pascal Lambert <coccinelle86@...>
 

Hi,

I clicked on your drop box link and once I was there I clicked on the file and it did not give me the option to download.  Am I doing something wrong?

Thanks.

Blessings.

Pascal

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of hurrikennyandopo ...
Sent: Friday, September 27, 2019 7:22 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA With RH Voice SAPI5

 

Hi

 

I have zipped the main file and also the language one if needed. I did not add any voices.

 

I will leave there for 24 hours.

 

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

 

Gene nz

 

On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

 

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

 

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

 

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

 

After the mentioned files have been installed you should be able to see the voices.

 

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

 

Gene nz

 

 

 

 

 

 

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel


El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.



 



--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.



Pop-up messages in Windows 10

Sile
 

Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile