Ok, I got the zip file just fine. Where do you get the language files?

Thanks.

Roger

On 9/27/2019 6:21 PM, hurrikennyandopo ... wrote:

Hi

I have zipped the main file and also the language one if needed. I did not add any voices.

I will leave there for 24 hours.

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

Gene nz

On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

After the mentioned files have been installed you should be able to see the voices.

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

Gene nz

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Hi

I have zipped the main file and also the language one if needed. I did not add any voices.

I will leave there for 24 hours.

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

Gene nz

On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

After the mentioned files have been installed you should be able to see the voices.

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

Gene nz

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

yes it was a message from Rui Fontes.
because I had purchased a printer of this brand that I responded to.
I wanted to know if there was a solution to read the ink level in NVDA.
that standard very difficult because they indicate the ink level of a chart and not numbers.becouse
cheers
paul otter

Op 27-9-2019 om 23:56 schreef Kerryn Gunness via Groups.Io:

hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app

hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:

Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:

Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:

you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:

Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:

Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.

yes they say it in a message.
I don't know what I can do with it.
I think it makes brother utilities more accessible.
I have wrote a message to him to explain what it is.
I had also a question about the ink how to know the inklevel.
but no respons anymore back.
cheers
paul otter

Op 27-9-2019 om 23:56 schreef Kerryn Gunness via Groups.Io:

hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app

hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:

Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:

Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:

you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:

Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:

Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.

Hi,
Go to addons.nvda-project.org, select Add-on Updater, and download the stable version from the link from that page.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Lenron
Sent: Friday, September 27, 2019 11:29 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater and Resource Monitor 19.10 to be released later today #AddonRelease

could I get the link to the addon updater? I have not been able to find it sense restoring my computer

On 9/27/19, Joseph Lee <joseph.lee22590@...> wrote:

Hi all,



Add-on Updater 19.10 and resource Monitor 19.10 will go out to the
world in a few hours. Add-on Updater 19.10 will now let you check for
updated versions of Debug Helper add-on by Luke Davis and includes new
and updated translations. Resource Monitor 19.10 brings localization
updates and properly recognizes latest Windows Insider Preview build
as Insider Preview build, along with fixing a compatibility issue with Python 3.



As always, when the updates become available, Add-on Updater will
guide you through the update process.



Cheers,

Joseph

--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762

hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app

hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:

Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:

Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:

you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:

Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:

Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.

hey
about
add ons for brodder
what is this about
is there an add on for brodder?

----- Original Message ----- From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 23, 2019 5:56 AM
Subject: Re: [nvda] New add-on for Brother Utilities app

hello Rui,
is it possible to display the ink level with nvda?
i have the dcp j572 dw from brother.
I think you will have the same problem.
do you have the solution?
kind regards
paul otter


Op 19-9-2019 om 17:36 schreef Rui Fontes:

Hello!

What was the extension?

The extra is only to the Brother utilities application, a kind of launcher to other Brother apps...

Any dificultie on those other apps, like in Brother control center?

Rui Fontes


??s 21:53 de 18/09/2019, Robert Logue escreveu:

Thanks Shaun. I downloaded the add on. I just don't know how to install it. Doesn't seem to have the file extensions that NVDA uses. I used the instructions for installing add-ons in NVDA.



I haven't had the mental energy to tackle the WiFi setup. I almost think it would be worth the installation fee if I get the tech to describe all the buttons.


Works fine as a printer using standard Windows print commands.


I like that this printer has dedicated buttons.



Bob



On 2019-09-12 3:02 p.m., Shaun Everiss wrote:

you go here

https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

However I wouldn't bother.

The combo boxes are still as inaccessible as ever.

The documentation doesn't have a command list, it will run as far back is 17.03 and as current is last nvda.

The documentation seems to just be the really basic readme pulled from github.

Now this is from a user looking at this briefly.

The addon works.

But it may as well be a pile of crap for all it does to me.

I don't know how to work it, there is basically no documentation except for a small description about what it does.

There isn't even a keyboard shortcut list.

If at all possible, I would like to see more than a learn more button labeled on the brother utilities and the iprint software.

There is a combobox on brother utilities but that and iprint are pritty much no gos as far as it matters.

Luckily unless you need to reinstall the driver you never have to bother with this really.

In fact depending on what you are doing, you may never need to bother about any of the brother software for basic tasks, both printing and scanning.

If your router or something changes you can edit the printer address as long as you have set that up yourself and configure it from windows and the web interfaces.

Hopefully you won't need to do that that often.

The software is a bit hit and miss, but then its not a problem because you don't need to use that software for scanning and printing which is about all we will ever need it for.

Anything else and well who knows.

The software for most brother things are just front ends for standard dumb users that want to use it.

The web interface is accessible enough for most users.

If you know how to configure a router then you will know how to use the web interface of any device like this.

The brother printer is like that.



On 13/09/2019 2:52 am, Robert Logue wrote:

Hello Rui. I am very interested in your addon. I just got a Brother laser mfp.


Please. How do I install this addon?


Thanks.


Bob


On 2019-05-18 9:36 a.m., Rui Fontes wrote:

Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.

On Sep 27, 2019, at 9:49 PM, Sascha Cowley via Groups.Io <sascha.camille@...> wrote:

Hi,

I can visually confirm that this does indeed make the notifications disappear off screen. Just note that it doesn't actually "clear" the notifications; they'll still be in the action centre.


Regards,
Sascha

On 28/09/2019 10:36, Sile via Groups.Io wrote:
Hi


I think I might have found an answer - could someone who can monitor the status of notifications check it?


win+A - open action center

win+A - closes action center and clears notifications.


Does this indeed work?


--Sile

On 2019-09-27 8:30 p.m., Sile via Groups.Io wrote:
Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile

Hi,

I clicked on your drop box link and once I was there I clicked on the file and it did not give me the option to download.  Am I doing something wrong?

Thanks.

Blessings.

Pascal

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of hurrikennyandopo ...
Sent: Friday, September 27, 2019 7:22 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA With RH Voice SAPI5

 

Hi

 

I have zipped the main file and also the language one if needed. I did not add any voices.

 

I will leave there for 24 hours.

 

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

 

Gene nz

 

On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

 

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

 

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

 

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

 

After the mentioned files have been installed you should be able to see the voices.

 

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

 

Gene nz

 

 

 

 

 

 

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.

 

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Hi


I think I might have found an answer - could someone who can monitor the status of notifications check it?


win+A - open action center

win+A - closes action center and clears notifications.


Does this indeed work?


--Sile

On 2019-09-27 8:30 p.m., Sile via Groups.Io wrote:

Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile

Hi

I have zipped the main file and also the language one if needed. I did not add any voices.

I will leave there for 24 hours.

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

Gene nz

On 28/09/2019 4:03 AM, Richard Wells wrote:

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

After the mentioned files have been installed you should be able to see the voices.

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

Gene nz

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Hello all


I know there is no way to access the text of pop-up notifications in Windows, but is there a shortcut key to make them all go away? The reason I ask is that occasionally when I am presenting using powerpoint one comes along and I don't know how to make it go away ...


--Sile

Hi

I have zipped the main file and also the language one if needed. I did not add any voices.

I will leave there for 24 hours.

The link to the drop box account is https://www.dropbox.com/s/c8ga3uuiov5o847/main%20file%20and%20language%20RH%20voice.zip?dl=0

Out of curosity are you using internet explorer when you go to download those files as if I remember right they change the extensions to zip instead of leaving as usual. nvda add on.

Gene nz

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

 

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

 

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

 

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

 

After the mentioned files have been installed you should be able to see the voices.

 

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

 

Gene nz

 

 

 

 

 

 

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.

 

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Hi,   what keyboard layout is she using?

On 26/09/2019 23:53, Robert Doc Wright godfearer wrote:

> I have a friend in her late 70’s trying to learn NVDA. For some reason

> when she presses NVDA+down arrow, it reads a single line of text and

> then stops. How does she correct this?

>

> ******If we can't look at ourselves, and ask, why?  then where does the

> learning start?***

>

>

Gene: I downloaded what I thought might be the main file and it was a .7z archive. I have all four voices and the English add-on, but I am missing the main one. A Dropbox link would be nice. Thanks

On 9/26/2019 10:30 PM, hurrikennyandopo ... wrote:

Hi

the first add on you get is under a heading called nvda it says like main add on and will need to be installed.

then jump down to the english part and under that is another one for language data or some thing like that it will also need to be installed.

Just under it is 4 english voices you will need to download also and install the ones you want.

so if you only get one that will be a starter.

After the mentioned files have been installed you should be able to see the voices.

You just need to change your synth to RH voice first then pick your voices second or voice you want to use.

Hopefully it should get you up and running at the worst I can drop box main add on language one and the 2 voices i have here.

Gene nz

On 27/09/2019 2:23 PM, Richard Wells wrote:

Could someone direct me to the driver file? I have the English add-on
and four, English voices, but I am obviously missing another driver add-on.

On 9/26/2019 9:21 PM, Gerardo Corripio wrote:

Are there Spanish voices yet for?

Gera
Enviado desde mi iPhone SE de Telcel

El 26 sep 2019, a la(s) 6:03 p. m., Richard Wells <richwels@...> escribió:

I was able to use all four English voices with NVDA using SAPI5. They
are not bad. I do wonder why the NVDA add-ons aren't being seen in the
synthesizer list after installation though.

--

Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Hi

Surely these are Windows functions and nothing to do with any screen reader.  Copy the text to the clipboard then try using the “Paste Special” options in MS Word.  I believe it’s on the Home sub-menu.

 

Cheers

~Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Tony Malykh
Sent: 27 September 2019 18:08
To: nvda@nvda.groups.io
Subject: Re: [nvda] Question About Copying Text

 

I believe this is a feature (or a known problem) of NVDA - all the copy/paste commands in NVDA operate only on plain text. I just checked with Jaws - it can preserve formatting and hyperlinks when copying from browser to Microsoft word. Maybe others can tell whether this works with narrator.

I think I just found this workaround for you. If you select text in browser and then instead of pressing Control+C you press applications button and in the context menu select copy, then at least the hyperlinks seem to be preserved. This works for me when copying from Chrome to MS Word.

--Tony

 

 

Hi. Okay, let me try to explain this better. I'm taking an online class where there's a lot of reading. For some of the discussion board posts, we're supposed to copy and paste the part of the reading that we want to talk about. When my classmates copy text from the reading, they somehow manage to keep the links and other formatting intact. I want to be able to do this. I'm copying from a web page and pasting it into a rich text edit field. When I paste the copied text, all formatting and links seem to have been removed. I hope this helps you understand what I'm trying to do. Thanks.

On 9/27/2019 1:28 AM, Sandesh computer trainer HR wrote:

Hi,

I am try to understand your requirement.

Do you needed to see the web format in rich format document.

Or while your students copying text from web they should not copy the

links which comes in middle of the actual detailed text.

Kindly write your requirement with scenario

It is easy to help you out.

Because I have seen few NVDA and windows ten selection and paste

options and when require I am also applying it.

With regards,

Sandesh HR

On 9/27/19, Lanie Molinar <laniemolinar91@...> wrote:

I'm not saving it. I'm copying it from a web page into a rich text edit

box. I've also seen this when copying from a web page into a Microsoft

Word document though.

On 9/26/2019 9:08 PM, Monte Single wrote:

Email Signature

What kind of document are you pasting the copied material into and in

what format are you saving it?

*From:*nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] *On Behalf Of

*Lanie Molinar

*Sent:* September-26-19 7:52 PM

*To:* nvda@nvda.groups.io

*Subject:* [nvda] Question About Copying Text

Hi everyone. I have a question about copying text from webpages or

anywhere that has links. I'm taking online classes, and for the

discussion board assignments, a lot of people are copying text

containing links as part of their posts, somehow keeping the links and

other formatting intact. I've been wanting to copy text that contains

links this way, but when I copy text, all the formatting seems to be

removed. Is their an accessible way to do this? I'm a pretty advanced

computer and NVDA user, so I'm surprised I don't know this. Thanks.

--

Lanie Molinar

Disability Rights Advocate and Software Engineering Student at Brigham

Young University-Idaho <https://byui.edu>

Connect with me on LinkedIn <https://linkedin.com/in/laniegmolinar/>

Phone: 832-284-2426

Certified expert with general use of NVDA (Non Visual Desktop Access

and use of it with Microsoft Word. Learn more here

<https://certification.nvaccess.org/>.

NVDA Certified Expert logo"NVDA Certified Expert (with Microsoft

Word)" logo

Do you have multiple disabilities or know someone who does? Please

check out and share my blog on life with multiple disabilities

<https://lifewithmultipledisabilities.home.blog>. Click the "Available

Groups" link to find support and advocacy groups for people with

multiple disabilities.

--

Email Signature

Lanie Molinar

Disability Rights Advocate and Software Engineering Student at Brigham

Young University-Idaho <https://byui.edu>

Connect with me on LinkedIn <https://linkedin.com/in/laniegmolinar/>

Phone: 832-284-2426

Certified expert with general use of NVDA (Non Visual Desktop Access and

use of it with Microsoft Word. Learn more here

<https://certification.nvaccess.org/>.

NVDA Certified Expert logo"NVDA Certified Expert (with Microsoft Word)"

logo

Do you have multiple disabilities or know someone who does? Please check

out and share my blog on life with multiple disabilities

<https://lifewithmultipledisabilities.home.blog>. Click the "Available

Groups" link to find support and advocacy groups for people with

multiple disabilities.

--

Lanie Molinar

Disability Rights Advocate and Software Engineering Student at Brigham Young University-Idaho

Connect with me on LinkedIn

Phone: 832-284-2426

Certified expert with general use of NVDA (Non Visual Desktop Access and use of it with Microsoft Word. Learn more here.

Do you have multiple disabilities or know someone who does? Please check out and share my blog on life with multiple disabilities. Click the "Available Groups" link to find support and advocacy groups for people with multiple disabilities.