Date   

Re: NVDA and office 2016

Quentin Christensen
 

Hi Cearbhall,

Re the strange Word template, if the document isn't too sensitive and you can send it to me privately I'd be happy to have a look - it might be something we can work on addressing.

As you've found with other files, NVDA's table commands SHOULD work on tables in Word.  As an intermediate workaround, possibly converting the document to HTML would enable it to be read as a web page.  If you go to File, Save As and from the filename field, press TAB to move to the "save as type" drop down and choose "Web page (*.htm, *.html)".

The HTML Word creates is ugly and bloated, but for reading it on a local machine, it might work.

When you open files from e-mail or the web, by default Word will open them in "reading view" which is possible to read but works very differently  (I wrote a section on it in the Word training material we'll be releasing in the next couple of months).  What I would recommend, is if you go into the Word options (alt+f then t), on that first, general page, tab to an option called "Open e-mail attachments and other uneditable files in reading view", and uncheck that - If you open a file from an email attachment etc then, it will open in the regular print layout so you can navigate as normal.  It will still be protected, so you'll need to press F6 to go to the "Protected view grouping" and press the "enable editing" button if you trust the sender and want to enable editing.

When you open any of the Office 2016 programs, instead of opening to a blank document / spreadsheet etc, it opens to the start screen.  You can either press ENTER to open a blank document, or you can navigate around to recent files or templates.  If you want to go back to the old style of opening directly to a blank file, go into the settings again and on that general page, the option after the one about opening email attachments is "show the start screen when this application starts" which you'll want to uncheck.

These options only apply to the current program so you'll need to uncheck it in Excel and any other Office programs you use too.

Re opening recent documents from the file list - Do you mean when you press alt+f you can press up arrow and find them listed at the bottom near exit?  You actually can do that:  Back in the options, this time control+tab down to "advanced", then tab a heap of times, or press alt+q to jump straight to "Quickly access this number of recent documents".  Once you check that option, you can tab to the next edit field which has a number (4 by default) and set that to whatever you like.

What that does, is visually, it puts the recent files at the bottom of the file menu, although if you press up arrow or shift+tab it actually starts moving around the file info tab, so instead you need to press either a number (1 for the most recent, 2 for the next most recent etc), or down arrow to the list.  Interestingly once you start down arrowing and get to the "new" tab, you could then up arrow twice to get to the last recent file in the list, but I haven't found a more direct way (if anyone does, please let me know!).

Note: most of this will be in the "Microsoft Word with NVDA" material, available in the next couple of months.  It is designed as a follow up to the "Basic Training for NVDA" module which is available now: http://www.nvaccess.org/shop/

Kind regards

Quentin.

On Fri, Jul 22, 2016 at 7:26 AM, Cearbhall O'Meadhra <cearbhall.omeadhra@...> wrote:

Further to my earlier message, I have tried this in both browse mode and Focus mode in NVDA with no luck.

 

It seems that the table in question was generated from a standard template issued by a government department and inserted into the current document. The document author then had to fill in the relevant variable data into the template. To do so, he had to make a left mouse click on the cell in order to open  it in edit mode. This author is sighted by the way. I think it relevant to mention his access method and source of the table since it turned out to be somewhat inaccessible.

 

I have found NVDA well able to read other tables in Word 2016 files as I studied more documents later today.

 

The Word problem seems to have been a particular issue relating to a custom made template that did not appear to conform to default Word methods of construction.

 

I am still puzzled by Excel 2016! When I highlight an excel workbook in my documents and press enter on it, I expect it to open in excel and display its contents. However, in Excel 2016, when I press enter on the file after unblocking it, Excel opens and NVDA can see nothing. A “Say all” command revealed a page of choices of different worksheet types that could be launched but no sign of my worksheet. There was one option which invited me to open  without specifying a particular type of worksheet. I press that but still nothing appeared. On going to the File ribbon, I discovered the name of my would-be worksheet listed in the “Recents” list. When I pressed that item in the Recents list, the worksheet opened! I was then able to read it. I cannot see any way to open the worksheet from a file list as I used to with excel 2010. Has anyone any advice on this?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 




--
Quentin Christensen
Training Material Developer

Ph +61 7 3149 3306 
Direct: +61 413 904 383
www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: NVDA and office 2016

Cearbhall O'Meadhra
 

Further to my earlier message, I have tried this in both browse mode and Focus mode in NVDA with no luck.

 

It seems that the table in question was generated from a standard template issued by a government department and inserted into the current document. The document author then had to fill in the relevant variable data into the template. To do so, he had to make a left mouse click on the cell in order to open  it in edit mode. This author is sighted by the way. I think it relevant to mention his access method and source of the table since it turned out to be somewhat inaccessible.

 

I have found NVDA well able to read other tables in Word 2016 files as I studied more documents later today.

 

The Word problem seems to have been a particular issue relating to a custom made template that did not appear to conform to default Word methods of construction.

 

I am still puzzled by Excel 2016! When I highlight an excel workbook in my documents and press enter on it, I expect it to open in excel and display its contents. However, in Excel 2016, when I press enter on the file after unblocking it, Excel opens and NVDA can see nothing. A “Say all” command revealed a page of choices of different worksheet types that could be launched but no sign of my worksheet. There was one option which invited me to open  without specifying a particular type of worksheet. I press that but still nothing appeared. On going to the File ribbon, I discovered the name of my would-be worksheet listed in the “Recents” list. When I pressed that item in the Recents list, the worksheet opened! I was then able to read it. I cannot see any way to open the worksheet from a file list as I used to with excel 2010. Has anyone any advice on this?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: NVDA not reading table in MSWord

Cearbhall O'Meadhra
 

Chris,

 

Yes, I have found that that is the most efficient way to get around the problem. NVDA reads the tables in adobe perfectly with the read cell commands. However, it cannot set row and column headers as that command does not appear to be available in Adobe.

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: jeffs nvda add on page

 

Well from what I read on pg13 the site may have been hacked but its completely purged nothing is logged either and no one is the wiser of exactly what was breached.
They can't even confirm it was a hack there is litterally nothing to go on.

On 22/07/2016 6:40 a.m., Gene wrote:
It appears that Jeff's site will be back at some point. Whether it is or not, you might be able to download the add ons from whatever site you find them on by using save target as or equivalent. It is important to save anything you download from the Internet if you can, that is a program or an add on. There is no guarantee they will be available in the future at all or when you want them.

Gene
----- Original Message -----


From: Bobby
Sent: Thursday, July 21, 2016 1:30 PM
To: nvda@nvda.groups.io
Subject: [nvda] jeffs nvda add on page


Well Josh I don't want any voices I would like the bit torrent sink add
on and the clip copy add on and I would like the audio cable add on.
Every web page that jeff had is down. I want the add ons because I had
to reinstall nvda 5 weeks ago. Talk to you all soon.




Re: jeffs nvda add on page

Gene
 

It appears that Jeff's site will be back at some point.  Whether it is or not, you might be able to download the add ons from whatever site you find them on by using save target as or equivalent.  It is important to save anything you download from the Internet if you can, that is a program or an add on.  There is no guarantee they will be available in the future at all or when you want them.
 
Gene

----- Original Message ----- 

From: Bobby
Sent: Thursday, July 21, 2016 1:30 PM
Subject: [nvda] jeffs nvda add on page

Well Josh I don't want any voices I would like the bit torrent sink add
on and the clip copy add on and I would like the audio cable add on. 
Every web page that jeff had is down.  I want the add ons because I had
to reinstall nvda 5 weeks ago.  Talk to you all soon.




jeffs nvda add on page

Bobby <bvinton@...>
 

Well Josh I don't want any voices I would like the bit torrent sink add on and the clip copy add on and I would like the audio cable add on. Every web page that jeff had is down. I want the add ons because I had to reinstall nvda 5 weeks ago. Talk to you all soon.


NVDA and office 2016

Cearbhall O'Meadhra
 

Hi Lanie et al,

 

Lanie recently reported that there were no problems in accessing Office 2016 by NVDA 2016.2.

 

Today I hit quite a few problems that I have not experienced with Office 2010.  I have just installed Office 2016 and I have still to understand fully how to use it. However, I have a number of documents that I must read for a board meeting next Wednesday. Some of these are in word form having been created in Word 2010. I could read them fine in Word 2016 until I came to a set of tables that are made up of four columns and 13 rows. The NVDA reading commands did not work at all in the tables. I then saved them to a text file with a view to seeing if the tables are tab delimited but I cannot see that in Notepad. So, will have to use Notepad++ to check that out. I then highlighted the entire word document and copied it to the clipboard for pasting into a new Excel worksheet. This time the text was all confined to column A but the tables were set out perfectly. Excel allows one to move from cell to cell using the arrow keys.

 

Finally, I asked the author of the original word 2010 document save the file as a .pdf file. This was the most readable form. The NVDA table reading commands worked fine for moving from cell to cell. The only problem there was that the column headings command was not available. I could not then set NVDA to call out the column or row headings as   I traversed the tables in the .pdf file.

 

Another major complication occurred with the fact that all the files were in protected view due to their having arrived as attachments. I made the mistake of opening one of the Word files without turning off the protected mode setting in the properties of the file. This caused Word to go berserk! NVDA froze, Windows froze and I had to force a reboot! Then the PC took ages to come back up and even longer to let me through the initial logon screen.

 

I have much to learn!

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


Re: NVDA not reading table in MSWord

Chris Mullins
 

Hi

I have heard many people complaining of accessibility issues with Office 2016.  I have the same NVDA version and Operating system as you and can read tables in Office 2007 Word documents perfectly using the keystrokes you mentioned.  Could you perhaps save the Word document as a pdf file and read it using acrobat?

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Mike Sedmak
Sent: 21 July 2016 17:16
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not reading table in MSWord

 

Sanity check, are you in browse mode? "ALT-space

Thanks,

Mike

 

Sent from my iPhone, please forgive the typos. 


On Jul 21, 2016, at 6:44 AM, Cearbhall O'Meadhra <cearbhall.omeadhra@...> wrote:

Hi all,

 

I am attempting to read an annual audit report in MS Word 2016 using NVDA 2016.2 and windows 10. I can read the document from top to bottom with “say all”. However, although I can jump to a table of financial figures in browse mode using the letter “t”, I cannot move through the table in the usual way with control+alt+arrows. How can I find out what is wrong with the word document that is preventing me from reading the table?

 

As this is a confidential draft document, I cannot share it with you until it is published. Meanwhile, I have to read it before next Wednesday!

 

Incidentally, I copied the entire contetnts of the Word file to the clipboard and pasted it into a fresh Excel 2016 file. The tables were set out perfectly and I could arrow from cell to cell in the usual Excel way.

 

Question is: If the tables are so correct that NVDA says “table 3rows and 4 columns” or some such, I would assume that the table is correctly constructed. How, then, is it that NVDA cannot read the cells  with control+alt+arrows? I can read through the row using control+right or left arrow but this is only moving from word to word. The column number is then reported and the right edge of the cell is reported as “Carriage return” There is no indication of a tab character.

 

Any ideas?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: NVDA not reading table in MSWord

Mike Sedmak
 

Sanity check, are you in browse mode? "ALT-space

Thanks,
Mike

Sent from my iPhone, please forgive the typos. 

On Jul 21, 2016, at 6:44 AM, Cearbhall O'Meadhra <cearbhall.omeadhra@...> wrote:

Hi all,

 

I am attempting to read an annual audit report in MS Word 2016 using NVDA 2016.2 and windows 10. I can read the document from top to bottom with “say all”. However, although I can jump to a table of financial figures in browse mode using the letter “t”, I cannot move through the table in the usual way with control+alt+arrows. How can I find out what is wrong with the word document that is preventing me from reading the table?

 

As this is a confidential draft document, I cannot share it with you until it is published. Meanwhile, I have to read it before next Wednesday!

 

Incidentally, I copied the entire contetnts of the Word file to the clipboard and pasted it into a fresh Excel 2016 file. The tables were set out perfectly and I could arrow from cell to cell in the usual Excel way.

 

Question is: If the tables are so correct that NVDA says “table 3rows and 4 columns” or some such, I would assume that the table is correctly constructed. How, then, is it that NVDA cannot read the cells  with control+alt+arrows? I can read through the row using control+right or left arrow but this is only moving from word to word. The column number is then reported and the right edge of the cell is reported as “Carriage return” There is no indication of a tab character.

 

Any ideas?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: NVDA not reading table in MSWord

Cearbhall O'Meadhra
 

How would that help? I could not then read the tables at all, surely!

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: NVDA not reading table in MSWord

Louis Maher <ljmaher@...>
 

One emergency strategy would be to convert it into a .txt file.

 

Regards

Louis Maher

Phone: 713-444-7838

E-mail: ljmaher@...

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Cearbhall O'Meadhra
Sent: Thursday, July 21, 2016 7:45 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not reading table in MSWord

 

Hi all,

 

I am attempting to read an annual audit report in MS Word 2016 using NVDA 2016.2 and windows 10. I can read the document from top to bottom with “say all”. However, although I can jump to a table of financial figures in browse mode using the letter “t”, I cannot move through the table in the usual way with control+alt+arrows. How can I find out what is wrong with the word document that is preventing me from reading the table?

 

As this is a confidential draft document, I cannot share it with you until it is published. Meanwhile, I have to read it before next Wednesday!

 

Incidentally, I copied the entire contetnts of the Word file to the clipboard and pasted it into a fresh Excel 2016 file. The tables were set out perfectly and I could arrow from cell to cell in the usual Excel way.

 

Question is: If the tables are so correct that NVDA says “table 3rows and 4 columns” or some such, I would assume that the table is correctly constructed. How, then, is it that NVDA cannot read the cells  with control+alt+arrows? I can read through the row using control+right or left arrow but this is only moving from word to word. The column number is then reported and the right edge of the cell is reported as “Carriage return” There is no indication of a tab character.

 

Any ideas?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: NVDA not reading table in MSWord

Cearbhall O'Meadhra
 

Hi all,

 

I am attempting to read an annual audit report in MS Word 2016 using NVDA 2016.2 and windows 10. I can read the document from top to bottom with “say all”. However, although I can jump to a table of financial figures in browse mode using the letter “t”, I cannot move through the table in the usual way with control+alt+arrows. How can I find out what is wrong with the word document that is preventing me from reading the table?

 

As this is a confidential draft document, I cannot share it with you until it is published. Meanwhile, I have to read it before next Wednesday!

 

Incidentally, I copied the entire contetnts of the Word file to the clipboard and pasted it into a fresh Excel 2016 file. The tables were set out perfectly and I could arrow from cell to cell in the usual Excel way.

 

Question is: If the tables are so correct that NVDA says “table 3rows and 4 columns” or some such, I would assume that the table is correctly constructed. How, then, is it that NVDA cannot read the cells  with control+alt+arrows? I can read through the row using control+right or left arrow but this is only moving from word to word. The column number is then reported and the right edge of the cell is reported as “Carriage return” There is no indication of a tab character.

 

Any ideas?

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: Vocalizer Update

Rui Fontes
 

Yes, you are correct in all guesses...

It will be needed to download and install the new driver and voice packages.
The old driver and old voice packages, I think, will need to be removed by
the user.

As soon we have a public Beta, will be made an announcement in this list.

I will not gave any more schedule...

Best regards,

Rui Fontes
Tiflotecnia, Lda.

-----Mensagem Original-----
De: Nimer Jaber
Data: tera-feira, 19 de julho de 2016 17:43
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Vocalizer Update


I am hoping that an announcement will be made on this list with
instructions. I imagine that there will be a new driver update that will
need to be downloaded, and new versions of voices that also can be
downloaded, but I guess we will all find out.

Thanks.

On Tue, Jul 19, 2016 at 11:33 AM Fernando Apan <ferapan@utexas.edu> wrote:

Hi All,
I don't write on this list very often, because I prefer to read your
opinions and keep learning obout our screen reader. However, I have a
question regarding the vocalizer update. What steps do I have to follow in
cace I want to upgrade when the update comes out?
Thanks in advance.
Cheers.

Fernando Apan.

From: Supanut Leepaisomboon
Sent: Tuesday, July 19, 2016 11:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Vocalizer Update


Hi,

No, there hasn't been any update. I emailed them to ask when it will be
released, and, as of the time they replied, which is pretty much 3 weeks
ago, they said that it will be out within 2 weeks and...here we are, 3 weeks
now and I checked the downloads page and it's still the same version,
3.0.12.

Note I'm referring to the Tifflotecnia version of Vocalizer.


Fernando Apan
Tel: (228) 8 16 53 90
Twitter: @fernandoapan
Skype: fernando.apan
Sitio web personal:
http://www.musicaenbraille.com
Museo del caf:
http://www.elcafe-tal.com


Re: Using Windows PowerShell

jordy deweer <webmaster_deweer@...>
 

Yes, I restarted my computer just before I ran the PS.
I think I will search some information with Google.
Thanks for your tip!

-----Oorspronkelijk bericht-----
Van: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Namens Brian's Mail list account
Verzonden: donderdag 21 juli 2016 12:35
Aan: nvda@nvda.groups.io
Onderwerp: Re: [nvda] Using Windows PowerShell

Sounds like a powershell file is missing or corrupted.
Does it run OK if nevda is completely shut down?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Webmaster Deweer" <webmaster_deweer@hotmail.be>
To: <nvda@nvda.groups.io>
Sent: Thursday, July 21, 2016 11:17 AM
Subject: Re: [nvda] Using Windows PowerShell


I get a warning, but the problem is solved.
When I start Windows Powershel for 32bit, then I have something like this:
Cannot load PSReadline module. Console is running without PSReadline.

What does that mean and is it a big problem?

Thanks for the answers.

Van: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Namens ?????????
???????
Verzonden: woensdag 20 juli 2016 21:13
Aan: nvda@nvda.groups.io
Onderwerp: Re: [nvda] Using Windows PowerShell

Hello.
Try to run the 32 bit version. (Windows PowerShell (x86)).
17.07.2016 12:43, Webmaster Deweer пишет:
Hello everybody,
I need to use the Windows PowerShell but it seems like NVDA doesn’t
support the fully WinPS window.
When I type letters, NVDA doesn’t say them, where it says typed letters in
all other applications!
Hopeful you understand what I mean, my grammar wasn’t correctly used, I
know!
But can anybody help me with this issue / problem?
Thanks in advance!
Regards, Jordy D



Re: Using Windows PowerShell

Brian's Mail list account BY <bglists@...>
 

Sounds like a powershell file is missing or corrupted.
Does it run OK if nevda is completely shut down?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Webmaster Deweer" <webmaster_deweer@hotmail.be>
To: <nvda@nvda.groups.io>
Sent: Thursday, July 21, 2016 11:17 AM
Subject: Re: [nvda] Using Windows PowerShell


I get a warning, but the problem is solved.
When I start Windows Powershel for 32bit, then I have something like this:
Cannot load PSReadline module. Console is running without PSReadline.

What does that mean and is it a big problem?

Thanks for the answers.

Van: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Namens ????????? ???????
Verzonden: woensdag 20 juli 2016 21:13
Aan: nvda@nvda.groups.io
Onderwerp: Re: [nvda] Using Windows PowerShell

Hello.
Try to run the 32 bit version. (Windows PowerShell (x86)).
17.07.2016 12:43, Webmaster Deweer пишет:
Hello everybody,
I need to use the Windows PowerShell but it seems like NVDA doesn’t support the fully WinPS window.
When I type letters, NVDA doesn’t say them, where it says typed letters in all other applications!
Hopeful you understand what I mean, my grammar wasn’t correctly used, I know!
But can anybody help me with this issue / problem?
Thanks in advance!
Regards, Jordy D



Re: accessible tv tuner

Brian's Mail list account BY <bglists@...>
 

Hmm, yes well not sure whether a us tuner will work in Europe unless it can decode dvb2 hd signals as gradually the sd channels are being migrated over making older talking boxes no longer able to get the channels moved over.

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Laughingthunder" <laughingthunder26@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, July 21, 2016 2:39 AM
Subject: Re: [nvda] accessible tv tuner


Hi,


You May want to look into a company called Hauppauge. I have the U.S version of one of their USB TV tuners, and I can get it to work with NVDA. The software they ship with is called WinTV, which has many inaccessible interface elements, but also many keyboard shortcuts, which tend to suffice for the most part for me. The Hauppauge tuner I have can also be used with Windows Media Center if you have that.


On 7/20/2016 4:19 AM, Brian's Mail list account wrote:
And we do not actually mean the ones that only get internet channels. I understand Googles one is alpha testing a screenreader for it at the moment.
What I'd like is a DVB2 tuner where the software that drives it on a pc is accessible with nvda. Most of the ones I've heard about are very graphic in nature, which is not much good.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Richard Kuzma via Groups.io" <rmkuzma=aol.com@groups.io>
To: <nvda@nvda.groups.io>
Sent: Tuesday, July 19, 2016 11:51 AM
Subject: [nvda] accessible tv tuner


Good morning,

Has anyone had any luck with any usb tv tuner for your pc.

Thanks






Re: Using Windows PowerShell

jordy deweer <webmaster_deweer@...>
 

I get a warning, but the problem is solved.

When I start Windows Powershel for 32bit, then I have something like this:

Cannot load PSReadline module. Console is running without PSReadline.

 

What does that mean and is it a big problem?

 

Thanks for the answers.

 

Van: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Namens ????????? ???????
Verzonden: woensdag 20 juli 2016 21:13
Aan: nvda@nvda.groups.io
Onderwerp: Re: [nvda] Using Windows PowerShell

 

Hello.
Try to run the 32 bit version. (Windows PowerShell (x86)).

17.07.2016 12:43, Webmaster Deweer пишет:

Hello everybody,

I need to use the Windows PowerShell but it seems like NVDA doesn’t support the fully WinPS window.

When I type letters, NVDA doesn’t say them, where it says typed letters in all other applications!

Hopeful you understand what I mean, my grammar wasn’t correctly used, I know!

But can anybody help me with this issue / problem?

Thanks in advance!

Regards, Jordy D

 


Re: jeffs nvda add on page

Quentin Christensen
 

If Jeff is on this list, if you don't already have a backup, it might be worth saving as much as you can off that link I gave.  Whoever is hosting those servers SHOULD have a backup - but best to have your own just in case....

On Thu, Jul 21, 2016 at 6:36 PM, Shaun Everiss <sm.everiss@...> wrote:
Hmmm.
well I know that the makers of pg13 radio are down to.
They all use the same server.
Its unknown what happened, current thinking is that some hacker managed to get passed their security subsystem and simply did a full delete of their entire drives every drive has been scrubbed clean and while its an idea no one has any idea exactly why that was and or how it happened as they usually keep an eye on that sort of thing.
No one knows what is going on.



On 21/07/2016 5:34 p.m., Bobby wrote:
Just to let you know they are all down.  Every web page that jeff had is
down


On 7/21/2016 12:59 AM, Quentin Christensen wrote:
Hi Bobby,

Do you mean: http://jeff.tdrealms.com/NVDA.htm

I did find Google's cache of it for you at:

http://webcache.googleusercontent.com/search?q=cache:http://jeff.tdrealms.com/NVDA.htm&gws_rd=cr&ei=UEyQV7ObAobS0ASI_KKACA


I must admit I haven't played with all of the add-ons at:
http://addons.nvda-project.org/index.en.html let alone other ones so
use at your own risk.

I see the whole tdrealms.com <http://tdrealms.com> domain seems to be
down so whether that's deliberate or permanent I'm not sure.

Kind regards

Quentin.

On Thu, Jul 21, 2016 at 1:35 PM, Bobby <bvinton@...
<mailto:bvinton@...>> wrote:

    I just wanted to tell you all that I can't get jeffs add on page
    to open at all.  I was wondering if jeff took his web page down.
    If so I will be very sad because Jeff had some very good add ons
    for nvda.







--
Quentin Christensen
Training Material Developer
Ph +61 7 3149 3306 <tel:%2B61%207%203149%203306>
Direct: +61 413 904 383
www.nvaccess.org <http://www.nvaccess.org/>
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess









--
Quentin Christensen
Training Material Developer

Ph +61 7 3149 3306 
Direct: +61 413 904 383
www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: jeffs nvda add on page

 

Hmmm.
well I know that the makers of pg13 radio are down to.
They all use the same server.
Its unknown what happened, current thinking is that some hacker managed to get passed their security subsystem and simply did a full delete of their entire drives every drive has been scrubbed clean and while its an idea no one has any idea exactly why that was and or how it happened as they usually keep an eye on that sort of thing.
No one knows what is going on.

On 21/07/2016 5:34 p.m., Bobby wrote:
Just to let you know they are all down. Every web page that jeff had is
down


On 7/21/2016 12:59 AM, Quentin Christensen wrote:
Hi Bobby,

Do you mean: http://jeff.tdrealms.com/NVDA.htm

I did find Google's cache of it for you at:

http://webcache.googleusercontent.com/search?q=cache:http://jeff.tdrealms.com/NVDA.htm&gws_rd=cr&ei=UEyQV7ObAobS0ASI_KKACA


I must admit I haven't played with all of the add-ons at:
http://addons.nvda-project.org/index.en.html let alone other ones so
use at your own risk.

I see the whole tdrealms.com <http://tdrealms.com> domain seems to be
down so whether that's deliberate or permanent I'm not sure.

Kind regards

Quentin.

On Thu, Jul 21, 2016 at 1:35 PM, Bobby <bvinton@optonline.net
<mailto:bvinton@optonline.net>> wrote:

I just wanted to tell you all that I can't get jeffs add on page
to open at all. I was wondering if jeff took his web page down.
If so I will be very sad because Jeff had some very good add ons
for nvda.







--
Quentin Christensen
Training Material Developer
Ph +61 7 3149 3306 <tel:%2B61%207%203149%203306>
Direct: +61 413 904 383
www.nvaccess.org <http://www.nvaccess.org/>
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess


Re: jeffs nvda add on page

Bobby <bvinton@...>
 

Just to let you know they are all down.  Every web page that jeff had is down


On 7/21/2016 12:59 AM, Quentin Christensen wrote:
Hi Bobby,


I did find Google's cache of it for you at:


I must admit I haven't played with all of the add-ons at: http://addons.nvda-project.org/index.en.html let alone other ones so use at your own risk.

I see the whole tdrealms.com domain seems to be down so whether that's deliberate or permanent I'm not sure.

Kind regards

Quentin.

On Thu, Jul 21, 2016 at 1:35 PM, Bobby <bvinton@...> wrote:
I just wanted to tell you all that I can't get jeffs add on page to open at all.  I was wondering if jeff took his web page down. If so I will be very sad because Jeff had some very good add ons for nvda.







--
Quentin Christensen
Training Material Developer

Ph +61 7 3149 3306 
Direct: +61 413 904 383
www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess