Date   

Re: [NVDA pronouncing "County" as "Company" in address line

Cearbhall O'Meadhra
 

Quentin,

 

I did not see your response when I was replying to Kevin just now. This explains the three dictionaries very clearly, thanks.

 

I have taken your advice and have included the dot after the Co. However, I found that when I am reading this sentence with control-right arrow (Word by word in other words!) the “Co.” is still being pronounced as: “company” followed by “dot quote”.

 

I’m almost there but would welcome any suggestions about covering the Say word issue. Is there another dictionary operating ?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Re: [NVDA pronouncing "County" as "Company" in address line

Cearbhall O'Meadhra
 

Kevin,

 

That did the trick, thanks!

 

The full contraction includes the Letters capital C, lowercase 0 and the full stop. However, I found that the dictionary would not recognize these three characters as a word. When I removed the full stop, the dictionary trapped it perfectly in standalone mode. This means that any other word with a capital C and lower case o would be trapped incorrectly.  For example:

“Co-operating with everyone”

Comes out as “County-operating with everyone” instead of “co-operating with everyone”.

 

Is there any way to get the full stop included in the contraction as the dictionary pattern?

 

Incidentally, the dictionary entry worked just as well in the default dictionary as in the voice dictionary. What is the difference between these two?

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 

I use the free version of Spam Reader to get rid of spam. The Professional version doesn't have this disclaimer in outgoing emails. Try Spam Reader for free now!

 


Windows 10 Anniversary Update

Steve Hoad
 

This is a major update for Windows 10 being released August 2. I know
the update is out in Beta and many features have been changing since
the earliest release. Since these updates load automatically, are
there things we should be aware of as NVDA users?
Here's an article from "The Verge" released Monday July 25 at about 9 A.m. EDT.

http://www.theverge.com/2016/7/25/12269736/microsoft-windows-10-anniversary-update-features-review

--
Steve Hoad


Re: Touch cursor support

Kevin Huber
 

Hi Pete:

It depends on what application you are in. All review modes are not
available in all applications.
For example, if you are in the desktop, you will only have Screen
Review mode and Object Review mode, but not Document Review Mode,
since there is not document to review, while on the other hand, when I
am typing this message, I have Screen Review mode, Document Review
mode and Object review mode, since I am creating a document.

I hope that explains your dilemma.
Kevin Huber

On 7/23/16, Pete <emac00@cogeco.ca> wrote:

insert numpad 7 does not cycle threw options for me

the first press gets me screen review the second press gets me no
previous review mode

insert numpad 1 works simularly the first press gets me object
review and the next pres gets me no previous review mode

This is using nvda latest running on windows 7 64 bit pro.

Pete



On 7/1/2016 8:14 PM, Gene wrote:
It's easier, in my opinion, to demonstrate how object navigation works
than to try to explain it. After it is demonstrated, an explanation
might be helpful but I learned how to use object navigation by
experimentation with very little reliance on explanations.
Do the following:
This discussion uses the desktop keyboard layout. I don't use the
laptop layout and am notfamiliar with it.
Issue the command numpad insert numpad 7. That is, hold numpad insert
and while doing so press 7. Do this until you have moved through the
review options you can move to in that way. Then move back using
numpad insert numpad one. Stop at object navigation.
Now, open some simple program everyone has on their computer. Let's
use Notepad.
Write the word "test."
Now, issue the command numpad insert numpad 4. You will move from the
document window to another part of the program.
Now issue the command numpad insert numpad 6. You are back in the
document window again. You have moved first to a different object,
then back to the document window, the object you started on.
Now issue the command numpad insert numpad 8.
You have moved out of the document window and are now at an object
that says untitled notepad window. Move up again with the same
command. I'm not sure what you will hear depending on your version of
Windows. You may hear desktop window. Try moving to the left and
right by object with numpad 4 and 6. At least on my machine, I hear no
next, no previous.
So move down one level again with numpad insert numpad 2. On my
machine, I can't move to the left but I can move to the right from
where I am. If I move to the right enough times, I get to untitled
notepad window again.
Move down once to get back into the Notepad program. Start moving to
the right, I don't think you can move to the left. If you move enough
times, you will be back in the edit field with the word test you wrote
awhile ago.
The point is that you first moved to the window, then continuing to
move down you moved into the window and then moved right object by
object until you got back into the edit field.
Experiment and look around. You may find that by looking around and
experimenting, things start to make sense as you conceptualize what
you are doing as you move.
Try moving around using the move left and right commands and moving up
and down and then using the move left and right commands. Note that
you can move to a lot of structures. Some you can move into and some
you can't because you are already in them.
If you get lost, you can always return to the program window where you
started by alt tabbing out of and then alt tabbing until you return to
the window.
This demonstration may not explain things technically precisely
accurately in terms of definitions. I'm not sure I know exactly how
to explain everything technically accurately. The point is to
experiment and get a concept of what you are doing by experimentation
and observation.
This may or may not allow you to understand everything. But this kind
of experimentation, along with working with a good tutorial section
that explains object navigation may allow you to understand it.
Also, note carefully that if you leave NVDA set to screen review, you
can't review the screen accurately much of the time if you intend to
move somewhere and then use the standard review commands such as
numpad 8 read current line. You must have NVDA set for object
navigation to have review work reliably. I have said before that most
NVDA users don't and won't understand this and that you should
automatically be returned to object review when you leave the window
you are in. I still feel strongly about this.
Gene
*----- Original Message -----*
*From:* Ann Byrne <mailto:annakb@sbcglobal.net>
*Sent:* Friday, July 01, 2016 6:36 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] Touch cursor support

How is each one invoked?
At 04:03 PM 7/1/2016, you wrote:
Hi,
A good example is Windows 10’s Settings app
(Windows+I) where you do need to use object
navigation to read descriptions of settings.
Cheers,
Joseph

From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
[mailto:nvda@nvda.groups.io] On Behalf Of Brian Vogel
Sent: Friday, July 1, 2016 2:00 PM
To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
Subject: Re: [nvda] Touch cursor support


Joseph Lee wrote: "If you are using Windows 8,
8.1 or 10, use of object navigation is essential when using newer
style apps."

Joseph, is there any material somewhere that
gives some discussion or examples of using
object navigation and the review cursor using some "real world" example?

I have not been able to get my arms around this,
and it's probably because I'm trying to use it
"in the wrong place." I strongly suspect that
had I known how to use these features the
step-by-step pizza ordering instructions for the
Pizza Hut website I was trying to create might
have been completed. I had one of those rare
"throw up my hands and walk away" moments
because I could not figure out how to get NVDA
to "play correctly" with the various pop-up
overlays, etc., and I'm almost certain it can.

Even if you could direct me to either an app or
a website that's a good sandbox for this undertaking I'd appreciate it.

--
Brian

I worry a lot. . . I worry that no matter how
cynical you become it's never enough to keep up.
~ Trudy, in Jane Wagner's "Search for
Signs of Intelligent Life in the Universe"








Re: [NVDA pronouncing "County" as "Company" in address line

Kevin Huber
 

Hi Cearbhall:

Try going into the Voice dictionary and changing it using the following method:

1. Press insert-n to open the NVDA menu.
2. Arrow down to Preferrences and press the right arrow key to open
the preferences submenu.
3. Arrow down to Voice Dictionary and press the right arrow to open
that submenu.
4. Arrow down to Speech Dictionary and press the Enter key.
5. Tab to the Add button and press the spacebar or the Enter key to
activate that button.
6. Type the original word, in your case, you would type Co
7. Press the tab key and then type the word that you want to replace
it with, in your case, you would type the word County.
8. Tab to OK and press the Enter key.
9. Make sure that the settings will be maintained by going into the
NVDA menu, arrowing to Save Configuration and press the Enter key.

I hope this helps.
Kevin Huber

On 7/24/16, Cearbhall O'Meadhra <cearbhall.omeadhra@blbc.ie> wrote:
Hi,



I wonder if anyone can advise how I can get NVDA to say "County" when it
meets the contraction "Co." in an address line?



I am using "ETI Eloquence" as my speech engine in NVDA 2016.2 and Windows
10.



This is the common way to present the County in both the UK and Ireland.
For
example, I live in County Wicklow and this is represented in my address
line
as "Co. Wicklow". However, NVDA says "Company Wicklow" every time!

How can I fix this?

All advice and thoughts are welcome.



All the best,



Cearbhall



m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@blbc.ie




Re: facebook messenger with nvda:

Waqas Ramzan
 

If you want to use fb messenger then I recommend you to use through web. Just go to messenger.com, sign in with your fb account and enjoy!

On July 24, 2016 2:40:12 PM "Davy Cuppens" <davycuppens@...> wrote:

Hi
 
It does not work at all. The most win10 apps are not accessible to screenreaders. If you have problems with that, inform microsoft.
 
Sent: Sunday, July 24, 2016 9:19 AM
Subject: [nvda] facebook messenger with nvda:
 

Hi How well does the facebook messenber app work with nvda? I thought about downloading it from the windows store on my pc, but was wondering if the accessibility issues were fixed yet.

Kenny Peyatt jr.


Re: [NVDA pronouncing "County" as "Company" in address line

Brian's Mail list account BY <bglists@...>
 

Not sure you are right. I see cty a lot and never know, unless its obvious, if it is county or country.
There a lot of these expanded abbreviations in sapi5 and other synths, and the only way around them is often regular expressions in the dictionary to screen out the times you do not want it to expand the letters, in the middle of words, in email addresses etc.
The current most alloying ones are parts of UK post codes being seen as states in amarica abbreviations, and imperial weights and measures being seen as all sorts of strange things.
I'll leave it to those more expert in such things to give you some pointers as I've just tended to live with it unless I'm trying to make an mp3 out of a text file in which case I alter the document.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Cearbhall O'Meadhra" <cearbhall.omeadhra@blbc.ie>
To: <nvda@nvda.groups.io>
Sent: Sunday, July 24, 2016 11:14 PM
Subject: Re: [nvda] [NVDA pronouncing "County" as "Company" in address line


Hi,



I wonder if anyone can advise how I can get NVDA to say "County" when it
meets the contraction "Co." in an address line?



I am using "ETI Eloquence" as my speech engine in NVDA 2016.2 and Windows
10.



This is the common way to present the County in both the UK and Ireland. For
example, I live in County Wicklow and this is represented in my address line
as "Co. Wicklow". However, NVDA says "Company Wicklow" every time!

How can I fix this?

All advice and thoughts are welcome.



All the best,



Cearbhall



m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@blbc.ie




Re: [NVDA pronouncing "County" as "Company" in address line

Quentin Christensen
 

You can do this via the speech dictionaries.  To edit the dictionary:

1. Press NVDA+n to open the NVDA menu
2. Press P for preferences
3. Press enter or d for default dictionary, v for voice dictionary or t for temporary dictionary:

  • Default: rules in this dictionary affect all speech in NVDA.
  • Voice: rules in this dictionary affect speech for the synthesizer voice currently being used.
  • Temporary: rules in this dictionary affect all speech in NVDA, but only for the current session. These rules are temporary and will be lost if NVDA is restarted.

  • 4. Press alt+a to add a new rule
    5. Type "co." (with the dot but without the quotes)
    6. Press tab
    7. Type the new word (county)
    8. Press enter
    9. Press TAB four times to get to the OK button
    10. Press ENTER.

    More information on the dictionaries here: file:///C:/Program%20Files%20(x86)/NVDA/documentation/en/userGuide.html#toc75

    Kind regards

    Quentin.

    On Mon, Jul 25, 2016 at 8:14 AM, Cearbhall O'Meadhra <cearbhall.omeadhra@...> wrote:

    Hi,

     

    I wonder if anyone can advise how I can get NVDA to say “County” when it meets the contraction “Co.” in an address line?

     

    I am using “ETI Eloquence” as my speech engine in NVDA 2016.2 and Windows 10.

     

    This is the common way to present the County in both the UK and Ireland. For example, I live in County Wicklow and this is represented in my address line as “Co. Wicklow”. However, NVDA says “Company Wicklow” every time!

    How can I fix this?

    All advice and thoughts are welcome.

     

    All the best,

     

    Cearbhall

     

    m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

     




    --
    Quentin Christensen
    Training Material Developer
    Basic Training for NVDA E-Book now available: http://www.nvaccess.org/shop/

    Direct: +61 413 904 383
    www.nvaccess.org 
    Facebook: http://www.facebook.com/NVAccess 
    Twitter: @NVAccess 


    Re: looking for a good ntivirus program

    Nimer Jaber
     

    Hello,

    In the past, I have recommended Sophos Home. It is cloud-based, and works quite well.

    Thanks.

    On Sun, Jul 24, 2016 at 3:35 AM Brian's Mail list account <bglists@...> wrote:
    I don't recall this allowed what I wonted last time I checked it.
     Brian

    bglists@...
    Sent via blueyonder.
    Please address personal email to:-
    briang1@..., putting 'Brian Gaff'
    in the display name field.
    ----- Original Message -----
    From: "Alexander Masic" <list@...>
    To: <nvda@nvda.groups.io>
    Sent: Sunday, July 24, 2016 9:00 AM
    Subject: Re: [nvda] looking for a good ntivirus program


    >I can recomend Avira antivirus, It's have got good reputation, and it's
    >also fairly accesible. You can do the most important tasks, as canning the
    >system and so on.
    >
    >
    >
    >
    > Den 2016-07-23 kl. 23:13, skrev Brian's Mail list account:
    >> Neither of which as far as I know can be downloaded to a stick updated
    >> and taken to a computer with no internet connection and run.
    >> Brian
    >>
    >> bglists@...
    >> Sent via blueyonder.
    >> Please address personal email to:-
    >> briang1@..., putting 'Brian Gaff'
    >> in the display name field.
    >> ----- Original Message ----- From: "Shaun Oliver" <blindman75@...>
    >> To: <nvda@nvda.groups.io>
    >> Sent: Saturday, July 23, 2016 3:19 PM
    >> Subject: Re: [nvda] looking for a good ntivirus program
    >>
    >>
    >>> further to my last, if I had to use any other, I'd either use vypre or
    >>> esset nod32
    >>>
    >>>
    >>>
    >>> On 23/07/2016 23:47, Shaun Oliver wrote:
    >>>>
    >>>> what is wrong with windows defender? quite frankly, it's as good as
    >>>> any other out there and is accessible.
    >>>>
    >>>>
    >>>> It does also get decent write ups.
    >>>>
    >>>>
    >>>>
    >>>> On 23/07/2016 23:18, Gene wrote:
    >>>>> Clamwin is not well reviewed. I wouldn't use it.
    >>>>> Gene
    >>>>> ----- Original Message -----
    >>>>> *From:* Pete <mailto:emac00@...>
    >>>>> *Sent:* Saturday, July 23, 2016 7:54 AM
    >>>>> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
    >>>>> *Subject:* Re: [nvda] looking for a good ntivirus program
    >>>>>
    >>>>> try clamwin
    >>>>>
    >>>>>
    >>>>>
    >>>>> On 7/2/2016 4:55 AM, Brian's Mail list account wrote:
    >>>>> > And as an aside to this question.
    >>>>> > I have a need for a stand alone anti virus scanner which I can run,
    >>>>> > say from a ram stick and update on one machine and run on others not
    >>>>> > always connected to the internet without it complaining its out of
    >>>>> > date or needs an internet connection to update. Brian
    >>>>> >
    >>>>> > bglists@... <mailto:bglists@...>
    >>>>> > Sent via blueyonder.
    >>>>> > Please address personal email to:-
    >>>>> > briang1@... <mailto:briang1@...>, putting
    >>>>> 'Brian Gaff'
    >>>>> > in the display name field.
    >>>>> > ----- Original Message ----- From: "John J. Boyer"
    >>>>> > <john.boyer@... <mailto:john.boyer@...>>
    >>>>> > To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>>
    >>>>> > Sent: Friday, July 01, 2016 1:12 PM
    >>>>> > Subject: [nvda] looking for a good ntivirus program
    >>>>> >
    >>>>> >
    >>>>> >> Does anyone want to recommend a free antivirus program that
    >>>>> works >> well
    >>>>> >> with NVDA?
    >>>>> >>
    >>>>> >> Thanks,
    >>>>> >> John
    >>>>> >>
    >>>>> >> --
    >>>>> >> John J. Boyer; President,
    >>>>> >> AbilitiesSoft, Inc.
    >>>>> >> Email: john.boyer@...
    >>>>> <mailto:john.boyer@...>
    >>>>> >> Website: http://www.abilitiessoft.org
    >>>>> >> Status: 501(C)(3) Nonprofit
    >>>>> >> Location: Madison, Wisconsin USA
    >>>>> >> Mission: To develop softwares and provide STEM services for people
    >>>>> with
    >>>>> >>         disabilities which are available at no cost.
    >>>>> >>
    >>>>> >>
    >>>>> >>
    >>>>> >>
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>>
    >>>>>
    >>>>>
    >>>>
    >>>>
    >>>
    >>>
    >>
    >>
    >>
    >
    >
    >
    >





    Re: [NVDA pronouncing "County" as "Company" in address line

    Chris Mullins
     

    Hi

    Activate NVDA menu and go to preferences, speech dictionary menu.  Press enter on  the Voice dictionary and add an entry.  Include the initial capital, the trailing period and check the case sensitive box.  Use the OK buttons to save the data.  The trailing period is important as for example, “John Wainwright & Co Ltd” is where Company would apply.

    #

    Cheers

    Chris

    From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Cearbhall O'Meadhra
    Sent: 24 July 2016 23:14
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] [NVDA pronouncing "County" as "Company" in address line

     

    Hi,

     

    I wonder if anyone can advise how I can get NVDA to say “County” when it meets the contraction “Co.” in an address line?

     

    I am using “ETI Eloquence” as my speech engine in NVDA 2016.2 and Windows 10.

     

    This is the common way to present the County in both the UK and Ireland. For example, I live in County Wicklow and this is represented in my address line as “Co. Wicklow”. However, NVDA says “Company Wicklow” every time!

     

    How can I fix this?

    All advice and thoughts are welcome.

     

     

    All the best,

     

    Cearbhall

     

    m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

     


    Re: where to learn programing

    Adrián Mena
     

    Thank you to all of you.

    2016-07-12 18:01 GMT-06:00, Quentin Christensen <quentin@nvaccess.org>:

    The Cisco Academy for the Vision impaired do online courses. Not sure if
    they have anything on programming going at the moment but they're here:
    http://www.ciscovision.org/

    Regards

    Quentin.

    On Wed, Jul 13, 2016 at 12:57 AM, Adrián Mena <adrianm7m@gmail.com> wrote:

    Hello guys, I would like to hear your recommendations about sites or
    places where to learn programming or anything related to web sites or
    computers on internet.
    They can be paid or free.
    Thank you.




    --
    Quentin Christensen
    Training Material Developer
    Ph +61 7 3149 3306
    Direct: +61 413 904 383
    www.nvaccess.org
    Facebook: http://www.facebook.com/NVAccess
    Twitter: @NVAccess
    --
    W= F x D "Carpe diem"


    Re: [NVDA pronouncing "County" as "Company" in address line

    Cearbhall O'Meadhra
     

    Hi,

     

    I wonder if anyone can advise how I can get NVDA to say “County” when it meets the contraction “Co.” in an address line?

     

    I am using “ETI Eloquence” as my speech engine in NVDA 2016.2 and Windows 10.

     

    This is the common way to present the County in both the UK and Ireland. For example, I live in County Wicklow and this is represented in my address line as “Co. Wicklow”. However, NVDA says “Company Wicklow” every time!

    How can I fix this?

    All advice and thoughts are welcome.

     

    All the best,

     

    Cearbhall

     

    m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

     


    How to reach cookie warning banners in Windows 10

    Brian Crabtree <pandbcrabtree@...>
     

    Please could someone suggest how to reach and dismiss the banner that comes up on websites, advising me that the site uses cookies.

    There is an x at the end of the banner, but I have tried everything I know, firstly to navigate to the banner and then to reach the x to dismiss it with NVDA and cannot get anywhere near it. I am on Windows 10 and the latest official release of NVDA.

    Is there perhaps a Windows command which helps? Brian Crabtree


    Re: NVDA 2016.2.1 does not install some addons from official addons website completely

    Chris Mullins
     

    Do the settings in the NVDA+Ctrl+m make any difference?

    Cheers
    Chris

    -----Original Message-----
    From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David Moore
    Sent: 24 July 2016 14:59
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] NVDA 2016.2.1 does not install some addons from official addons website completely

    Hi,
    Thanks a lot, but I do have Golden cursor unrestricted, and I can't get the
    Windows+NVDA+C to work either so I can change the movement. I have a
    Windows+NVDA+touch
    pad as well, but I cannot control the mouse pointer movement like I can with Golden cursor. Are there changes that I could make with my touch pad so that it would follow my finger better?
    Thanks for getting back with me.
    David Moore


    -----Original Message-----
    From: Gene New Zealand
    Sent: Saturday, July 23, 2016 9:37 PM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] NVDA 2016.2.1 does not install some addons from official addons website completely

    Hi


    I wonder if some how you have restricted where the mouse goes. I was just looking through the commands and saw these 2.


    I do not use the mouse hardly and when I do now I use a touch pad, so it moves the pointer to where my finger is.


    The commands are below.


    nvda+win+c: select the level of movement. nvda+win+r: toggle mouse
    restriction.


    it might be a matter of unrestricting what theyare set to.



    Gene nz



    On 24/07/2016 11:17 AM, David Moore wrote:
    Hi,
    I am having a problem with Golden Cursor, my favorite add on by far.
    Yesterday, it stopped moving the mouse pointer when pressing the arrow
    keys. Everything else with it works, like reporting the position where
    the mouse pointer is. I uninstalled it, and installed it again, and it
    still will not move the mouse around the screen with the arrow keys. I
    tried version 1.1, and the development version, and they both do this.
    I was using the mouse 50 percent of the time, just by moving the mouse
    pointer with the arrow keys. Let me know if any of you are
    experiencing this problem, and if so, have you been able to fix it
    some way.
    Take care, guys,
    David Moore


    -----Original Message----- From: Brian's Mail list account
    Sent: Saturday, July 23, 2016 5:17 PM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] NVDA 2016.2.1 does not install some addons from
    official addons website completely

    Are these the ones you just downloaded or ones that were there before.
    Also
    if they were there before which version of nvda was running at the time?
    I have found at times that I've had to delete and reinstall add ons if
    there has been an nvda update in between. Its not always the case but
    sometimes. My guess is that some settings got screwed with or something.
    Brian

    bglists@blueyonder.co.uk
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk, putting 'Brian Gaff'
    in the display name field.
    ----- Original Message ----- From: "J.G" <jozko.gregorc@gmail.com>
    To: <nvda@nvda.groups.io>
    Sent: Saturday, July 23, 2016 7:09 PM
    Subject: [nvda] NVDA 2016.2.1 does not install some addons from
    official addons website completely


    Hi,

    here is description of problem:

    when i downloaded addons from addons.nvda-project.org to my computer
    and opened chosen addons, nvda made as usual. Then I restart nvda, but
    in Addon manager addon status was "install" and now I cannot use some
    of addons.
    These are: ControlUsageAssistant, FocusHighlight, Ocr, PlaceMarkers
    SystrayList and Wirtual revision.

    What could be wrong?

    Thanks, Jožef






    --
    Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


    Re: NVDA 2016.2.1 does not install some addons from official addons website completely

    David Moore
     

    Hi,
    Thanks a lot, but I do have Golden cursor unrestricted, and I can't get the Windows+NVDA+C to work either so I can change the movement. I have a touch pad as well, but I cannot control the mouse pointer movement like I can with Golden cursor. Are there changes that I could make with my touch pad so that it would follow my finger better?
    Thanks for getting back with me.
    David Moore

    -----Original Message-----
    From: Gene New Zealand
    Sent: Saturday, July 23, 2016 9:37 PM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] NVDA 2016.2.1 does not install some addons from official addons website completely

    Hi


    I wonder if some how you have restricted where the mouse goes. I was
    just looking through the commands and saw these 2.


    I do not use the mouse hardly and when I do now I use a touch pad, so it
    moves the pointer to where my finger is.


    The commands are below.


    nvda+win+c: select the level of movement. nvda+win+r: toggle mouse
    restriction.


    it might be a matter of unrestricting what theyare set to.



    Gene nz



    On 24/07/2016 11:17 AM, David Moore wrote:
    Hi,
    I am having a problem with Golden Cursor, my favorite add on by far.
    Yesterday, it stopped moving the mouse pointer when pressing the arrow
    keys. Everything else with it works, like reporting the position where
    the mouse pointer is. I uninstalled it, and installed it again, and it
    still will not move the mouse around the screen with the arrow keys. I
    tried version 1.1, and the development version, and they both do this.
    I was using the mouse 50 percent of the time, just by moving the mouse
    pointer with the arrow keys. Let me know if any of you are
    experiencing this problem, and if so, have you been able to fix it
    some way.
    Take care, guys,
    David Moore


    -----Original Message----- From: Brian's Mail list account
    Sent: Saturday, July 23, 2016 5:17 PM
    To: nvda@nvda.groups.io
    Subject: Re: [nvda] NVDA 2016.2.1 does not install some addons from
    official addons website completely

    Are these the ones you just downloaded or ones that were there before.
    Also
    if they were there before which version of nvda was running at the time?
    I have found at times that I've had to delete and reinstall add ons if
    there has been an nvda update in between. Its not always the case but
    sometimes. My guess is that some settings got screwed with or something.
    Brian

    bglists@blueyonder.co.uk
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk, putting 'Brian Gaff'
    in the display name field.
    ----- Original Message ----- From: "J.G" <jozko.gregorc@gmail.com>
    To: <nvda@nvda.groups.io>
    Sent: Saturday, July 23, 2016 7:09 PM
    Subject: [nvda] NVDA 2016.2.1 does not install some addons from official
    addons website completely


    Hi,

    here is description of problem:

    when i downloaded addons from addons.nvda-project.org to my computer and
    opened chosen addons, nvda made as usual. Then I restart nvda, but in
    Addon
    manager addon status was "install" and now I cannot use some of addons.
    These are: ControlUsageAssistant, FocusHighlight, Ocr, PlaceMarkers
    SystrayList and Wirtual revision.

    What could be wrong?

    Thanks, Jožef






    --
    Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


    Re: facebook messenger with nvda:

    Davy Cuppens
     

    Hi
     
    It does not work at all. The most win10 apps are not accessible to screenreaders. If you have problems with that, inform microsoft.
     

    Sent: Sunday, July 24, 2016 9:19 AM
    Subject: [nvda] facebook messenger with nvda:
     

    Hi How well does the facebook messenber app work with nvda? I thought about downloading it from the windows store on my pc, but was wondering if the accessibility issues were fixed yet.

    Kenny Peyatt jr.


    Re: looking for a good ntivirus program

    Brian's Mail list account BY <bglists@...>
     

    I don't recall this allowed what I wonted last time I checked it.
    Brian

    bglists@blueyonder.co.uk
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk, putting 'Brian Gaff'
    in the display name field.

    ----- Original Message -----
    From: "Alexander Masic" <list@masic.se>
    To: <nvda@nvda.groups.io>
    Sent: Sunday, July 24, 2016 9:00 AM
    Subject: Re: [nvda] looking for a good ntivirus program


    I can recomend Avira antivirus, It's have got good reputation, and it's also fairly accesible. You can do the most important tasks, as canning the system and so on.




    Den 2016-07-23 kl. 23:13, skrev Brian's Mail list account:
    Neither of which as far as I know can be downloaded to a stick updated and taken to a computer with no internet connection and run.
    Brian

    bglists@blueyonder.co.uk
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk, putting 'Brian Gaff'
    in the display name field.
    ----- Original Message ----- From: "Shaun Oliver" <blindman75@gmail.com>
    To: <nvda@nvda.groups.io>
    Sent: Saturday, July 23, 2016 3:19 PM
    Subject: Re: [nvda] looking for a good ntivirus program


    further to my last, if I had to use any other, I'd either use vypre or
    esset nod32



    On 23/07/2016 23:47, Shaun Oliver wrote:

    what is wrong with windows defender? quite frankly, it's as good as
    any other out there and is accessible.


    It does also get decent write ups.



    On 23/07/2016 23:18, Gene wrote:
    Clamwin is not well reviewed. I wouldn't use it.
    Gene
    ----- Original Message -----
    *From:* Pete <mailto:emac00@cogeco.ca>
    *Sent:* Saturday, July 23, 2016 7:54 AM
    *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
    *Subject:* Re: [nvda] looking for a good ntivirus program

    try clamwin



    On 7/2/2016 4:55 AM, Brian's Mail list account wrote:
    And as an aside to this question.
    I have a need for a stand alone anti virus scanner which I can run,
    say from a ram stick and update on one machine and run on others not
    always connected to the internet without it complaining its out of
    date or needs an internet connection to update. Brian

    bglists@blueyonder.co.uk <mailto:bglists@blueyonder.co.uk>
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk <mailto:briang1@blueyonder.co.uk>, putting
    'Brian Gaff'
    in the display name field.
    ----- Original Message ----- From: "John J. Boyer"
    <john.boyer@abilitiessoft.org <mailto:john.boyer@abilitiessoft.org>>
    To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>>
    Sent: Friday, July 01, 2016 1:12 PM
    Subject: [nvda] looking for a good ntivirus program


    Does anyone want to recommend a free antivirus program that
    works >> well
    with NVDA?

    Thanks,
    John

    --
    John J. Boyer; President,
    AbilitiesSoft, Inc.
    Email: john.boyer@abilitiessoft.org
    <mailto:john.boyer@abilitiessoft.org>
    Website: http://www.abilitiessoft.org
    Status: 501(C)(3) Nonprofit
    Location: Madison, Wisconsin USA
    Mission: To develop softwares and provide STEM services for people
    with
    disabilities which are available at no cost.










    Problem using NVDA with CombiBraille via BRLTTy on win10-32 bit

    "René Ludwig
     

    Hello,
    The above described configuration worked well under Win 7. after upgrading to windows 10 with a clean install and installation of the latest versions of NVDA and BRLTTY i get an error message when selecting BRLTTY from the braille dialogbox in NVDA. It seems that the communication between BRLTTY and the CombiBraille works because i get the usual message on the braille when the BRLTTY service is loaded.
    Is there anything i can do to get braille working again?
    Many thanks!
    Rene

    Von meinem Mobilgerät gesendet


    Re: looking for a good ntivirus program

    Alexander Masic
     

    I can recomend Avira antivirus, It's have got good reputation, and it's also fairly accesible. You can do the most important tasks, as canning the system and so on.




    Den 2016-07-23 kl. 23:13, skrev Brian's Mail list account:

    Neither of which as far as I know can be downloaded to a stick updated and taken to a computer with no internet connection and run.
    Brian

    bglists@blueyonder.co.uk
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk, putting 'Brian Gaff'
    in the display name field.
    ----- Original Message ----- From: "Shaun Oliver" <blindman75@gmail.com>
    To: <nvda@nvda.groups.io>
    Sent: Saturday, July 23, 2016 3:19 PM
    Subject: Re: [nvda] looking for a good ntivirus program


    further to my last, if I had to use any other, I'd either use vypre or
    esset nod32



    On 23/07/2016 23:47, Shaun Oliver wrote:

    what is wrong with windows defender? quite frankly, it's as good as
    any other out there and is accessible.


    It does also get decent write ups.



    On 23/07/2016 23:18, Gene wrote:
    Clamwin is not well reviewed. I wouldn't use it.
    Gene
    ----- Original Message -----
    *From:* Pete <mailto:emac00@cogeco.ca>
    *Sent:* Saturday, July 23, 2016 7:54 AM
    *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
    *Subject:* Re: [nvda] looking for a good ntivirus program

    try clamwin



    On 7/2/2016 4:55 AM, Brian's Mail list account wrote:
    And as an aside to this question.
    I have a need for a stand alone anti virus scanner which I can run,
    say from a ram stick and update on one machine and run on others not
    always connected to the internet without it complaining its out of
    date or needs an internet connection to update. Brian

    bglists@blueyonder.co.uk <mailto:bglists@blueyonder.co.uk>
    Sent via blueyonder.
    Please address personal email to:-
    briang1@blueyonder.co.uk <mailto:briang1@blueyonder.co.uk>, putting
    'Brian Gaff'
    in the display name field.
    ----- Original Message ----- From: "John J. Boyer"
    <john.boyer@abilitiessoft.org <mailto:john.boyer@abilitiessoft.org>>
    To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>>
    Sent: Friday, July 01, 2016 1:12 PM
    Subject: [nvda] looking for a good ntivirus program


    Does anyone want to recommend a free antivirus program that
    works >> well
    with NVDA?

    Thanks,
    John

    --
    John J. Boyer; President,
    AbilitiesSoft, Inc.
    Email: john.boyer@abilitiessoft.org
    <mailto:john.boyer@abilitiessoft.org>
    Website: http://www.abilitiessoft.org
    Status: 501(C)(3) Nonprofit
    Location: Madison, Wisconsin USA
    Mission: To develop softwares and provide STEM services for people
    with
    disabilities which are available at no cost.









    Re: using nvda to label buttons in the WWE Network app:

    Mr. Wong Chi Wai <cwwong.pro@...>
     

    Thanks for the information.
    I would highly appreciative if there can be a addons/feature of NVDA that can give some unnamed item (e.g. buttons) a lable.

    Yes, IOS do have this function build in and on Windows, I know only webvisim (addons for firefox) could do so.


     
     


    Gene New Zealand 於 24/7/2016 14:10 寫道:

    Hi


    I know there was talk about one for NVDA but as far as I know there is not one and no add on for one either for nvda.

    The following link will tell you a little bit more on where it is at present not any where at https://github.com/nvaccess/nvda/issues/2111

    My self and other some one said a while ago if this could be done for NVDA like crowd funded I am pretty sure there were people who would put in for it..


    I use an android phone with talk back and it has it own graphics labeler built into it, the apple i phone and other screen readers I have used have it built in as well. I did not think I would use it much on my android phone, but when you can make that app usable by labeling the button etc, it is worth it.


    A while ago there was a guy that did a netdrive.pie file which if I remembered rightly could do something like that, but might have only done it for the one object???? I am not sure if he went any further on it, but I think it is the same file I still have here on my pc.

    Gene NZ



    On 24/07/2016 2:54 PM, Kenny Peyattt jr. wrote:

    Hi I downloaded a app from the windows store called WWE Nettwork, and while I can tab through the various options and press enter to actiate them, I noticed that the buttons are not labeled. I thought about making a add on for nvda that can label the buttons but was wondering if there is a feature in NVDA that can let me label the buttons.

    Kenny Peyatt jr.


    -- 
    Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net