Date   
Re: One Core voices

Sarah k Alawami
 

OH, I didn't evenrealise that was a bug. Woopsy, my bad. I'll play with that the next time I use the 1 core voices. Cool!

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 19:25, Quentin Christensen wrote:

We've "fixed" that issue with OneCore voices now, so you don't need to adjust the rate in Windows settings anymore - you completely adjust the speech rate from NVDA's voice settings (NVDA+control+v) now just like with other synthesizers.

We also just added rate boost as an option for Windows OneCore in NVDA 2019.2, so if you looked in 2019.1 or earlier then you wouldn't have encountered the option for OneCore :)

Finally on all this, another thing not everyone may have encountered, from 2019.2 you can toggle rate boost (for OneCore and eSpeak NG) from the synth settings ring.  Press NVDA+control+left or right arrow to move between options, and NVDA+control+up or down arrow to change.  If using Laptop keyboard layout, add SHIFT to both of those commands.

Regards

Quentin.

On Thu, Oct 31, 2019 at 1:16 PM molly the blind tech lover <brainardmolly@...> wrote:

I just saw the rate boost option for the Windows One-Core voices in NVDA’s speech settings category. Not sure why I thought the setting was in the synthesizer settings.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, October 30, 2019 10:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] one core voices

 

Actually, I never saw it ther at all. I normally just go into the windows set up and boost that rate to 100, then I can keep the 1 core to about 60 and be good. No one but me can thenunderstand them.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:54, Tyler Spivey wrote:

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:

__

That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.

to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.

Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps



On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:

OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.





--
Quentin Christensen
Training and Support Manager

Re: One Core voices

Sarah k Alawami
 

Because for me it is, with eSpeak, I see it, rate boost. But I might be getting mixed up with synths, OH well, I'll just change it under windows and time and date as it works there as well with 1 core.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 19:16, molly the blind tech lover wrote:

I just saw the rate boost option for the Windows One-Core voices in NVDA’s speech settings category. Not sure why I thought the setting was in the synthesizer settings.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, October 30, 2019 10:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] one core voices

 

Actually, I never saw it ther at all. I normally just go into the windows set up and boost that rate to 100, then I can keep the 1 core to about 60 and be good. No one but me can thenunderstand them.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:54, Tyler Spivey wrote:

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:

__

That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.

to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.

Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps



On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:

OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.



Windows 10 App Essentials 19.11A emergency patch #addonrelease

 

Hi all,

 

At least two users reported that Windows 10 App Essentials 19.11 doesn’t work on their computers, and it turns out it is related to the fact that the add-on relies on NVDA 2019.2.1 changes. Just in case some of you didn’t upgrade to NVDA 2019.2.1 (which I highly recommend that you do upgrade), I’ll release version 19.11A of this add-on tonight. Sorry for the inconvenience.

Cheers,

Joseph

Re: Problem with Excel

Quentin Christensen
 

Which version of Excel (and which version of NVDA) are you using?  As I mentioned in my other reply, there was an issue with Excel last year from memory where that would happen, but it should have been fixed.  If for some reason you are stuck on a version with that problem, the fix was to go into Excel's advanced options and toggle "allow editing in-cells".

You could also try NVDA's "COM Registration fixing tool" if you are getting "blank" and "unknown' in other places as well - press NVDA+N, then T, then down arrow to "COM registration fixing tool" and press ENTER.

Regards

Quentin.

On Thu, Oct 31, 2019 at 1:52 PM tek with prathmesh basatwar <Prathmeshbasatwar@...> wrote:

actually friends I have facing the problem regarding Excel whenever I am trying to edit any cell of Excel by pressing f2 key my screen display in blank blank I want to edit the cell of Excel but it is not supporting so what I should do now



--
Quentin Christensen
Training and Support Manager

Problem with Excel

tek with prathmesh basatwar <Prathmeshbasatwar@...>
 

actually friends I have facing the problem regarding Excel whenever I am trying to edit any cell of Excel by pressing f2 key my screen display in blank blank I want to edit the cell of Excel but it is not supporting so what I should do now

Re: How to post into the group

Quentin Christensen
 

Your post came through, so you've found how to post to the group :)

From the email address you subscribed to the group with, address an email to nvda@nvda.groups.io and it should reach us.

Re Excel editing cells reading blank.  Which version of NVDA and Excel are you using?  There was an issue with Excel last year from memory where that would happen, but it should have been fixed.  If for some reason you are stuck on a version with that problem, the fix was to go into Excel's advanced options and toggle "allow editing in-cells".

Regards

Quentin.

On Thu, Oct 31, 2019 at 1:47 PM tek with prathmesh basatwar <Prathmeshbasatwar@...> wrote:
hello friends I want to ask how to post into the group please tell me please give me the easy way to post the email into the the group and I have another query
And my query is that whenever I am trying to edit any text in the cell which is in excel so my screen reader is not working with it what is the problem whenever I am pressing f2 on any cell of Excel so my screen reader is just saying blank



--
Quentin Christensen
Training and Support Manager

How to post into the group

tek with prathmesh basatwar <Prathmeshbasatwar@...>
 

hello friends I want to ask how to post into the group please tell me please give me the easy way to post the email into the the group and I have another query
And my query is that whenever I am trying to edit any text in the cell which is in excel so my screen reader is not working with it what is the problem whenever I am pressing f2 on any cell of Excel so my screen reader is just saying blank

Re: NVDA remote

Scott Berry
 

I am using it. It seems to work fine here.

On 10/30/2019 10:53 AM, Robert Doc Wright godfearer wrote:

It seems to no longer work. Does any one know of an alternative that will work with NVDA?

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

--
Scott Berry
Medical Office Assistant
Associates in Allied health
Patient Advocate

Re: NVDA remote

Robert Doc Wright godfearer
 

I wrote to Chris. I hope he responds. I have a number of clients using NVDA.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Joseph Lee
Sent: Wednesday, October 30, 2019 4:28 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote

 

Hi,

I once tried to do that, but found it difficult to port the add-on to Python 3. Besides, Remote add-on patches speech functions that may have seen vast changes between 2019.2 and 2019.3, contributing to headaches.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Kingett
Sent: Wednesday, October 30, 2019 11:11 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote

 

In short, no. I thought Joseph was making a patch for Python 3 but I'd write to the developers about this. Especially since Python 3 is coming closer!

 

Re: One Core voices

molly the blind tech lover
 

i love the rate boost option ☺️ it's awesome.


On Wed, Oct 30, 2019, 10:25 PM Quentin Christensen <quentin@...> wrote:
We've "fixed" that issue with OneCore voices now, so you don't need to adjust the rate in Windows settings anymore - you completely adjust the speech rate from NVDA's voice settings (NVDA+control+v) now just like with other synthesizers.

We also just added rate boost as an option for Windows OneCore in NVDA 2019.2, so if you looked in 2019.1 or earlier then you wouldn't have encountered the option for OneCore :)

Finally on all this, another thing not everyone may have encountered, from 2019.2 you can toggle rate boost (for OneCore and eSpeak NG) from the synth settings ring.  Press NVDA+control+left or right arrow to move between options, and NVDA+control+up or down arrow to change.  If using Laptop keyboard layout, add SHIFT to both of those commands.

Regards

Quentin.

On Thu, Oct 31, 2019 at 1:16 PM molly the blind tech lover <brainardmolly@...> wrote:

I just saw the rate boost option for the Windows One-Core voices in NVDA’s speech settings category. Not sure why I thought the setting was in the synthesizer settings.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, October 30, 2019 10:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] one core voices

 

Actually, I never saw it ther at all. I normally just go into the windows set up and boost that rate to 100, then I can keep the 1 core to about 60 and be good. No one but me can thenunderstand them.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:54, Tyler Spivey wrote:

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:

__

That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.

to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.

Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps



On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:

OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.





--
Quentin Christensen
Training and Support Manager

Re: Portable Copy of NVDA with Add-ons

tek with prathmesh basatwar <Prathmeshbasatwar@...>
 

Actually when you checked save all configuration checkbox all the addons and configuration will be saved including addon also so you don't need to download or copy them additional thank you

Re: One Core voices

Quentin Christensen
 

We've "fixed" that issue with OneCore voices now, so you don't need to adjust the rate in Windows settings anymore - you completely adjust the speech rate from NVDA's voice settings (NVDA+control+v) now just like with other synthesizers.

We also just added rate boost as an option for Windows OneCore in NVDA 2019.2, so if you looked in 2019.1 or earlier then you wouldn't have encountered the option for OneCore :)

Finally on all this, another thing not everyone may have encountered, from 2019.2 you can toggle rate boost (for OneCore and eSpeak NG) from the synth settings ring.  Press NVDA+control+left or right arrow to move between options, and NVDA+control+up or down arrow to change.  If using Laptop keyboard layout, add SHIFT to both of those commands.

Regards

Quentin.

On Thu, Oct 31, 2019 at 1:16 PM molly the blind tech lover <brainardmolly@...> wrote:

I just saw the rate boost option for the Windows One-Core voices in NVDA’s speech settings category. Not sure why I thought the setting was in the synthesizer settings.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, October 30, 2019 10:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] one core voices

 

Actually, I never saw it ther at all. I normally just go into the windows set up and boost that rate to 100, then I can keep the 1 core to about 60 and be good. No one but me can thenunderstand them.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:54, Tyler Spivey wrote:

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:

__

That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.

to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.

Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps



On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:

OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.





--
Quentin Christensen
Training and Support Manager

Re: One Core voices

molly the blind tech lover
 

I just saw the rate boost option for the Windows One-Core voices in NVDA’s speech settings category. Not sure why I thought the setting was in the synthesizer settings.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, October 30, 2019 10:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] one core voices

 

Actually, I never saw it ther at all. I normally just go into the windows set up and boost that rate to 100, then I can keep the 1 core to about 60 and be good. No one but me can thenunderstand them.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:54, Tyler Spivey wrote:

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:

__

That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.

to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.

Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps



On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:

OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.



Re: One Core voices

Sarah k Alawami
 

Actually, I never saw it ther at all. I normally just go into the windows set up and boost that rate to 100, then I can keep the 1 core to about 60 and be good. No one but me can thenunderstand them.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:54, Tyler Spivey wrote:

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:

__

That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.

to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.

Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps ☺️


On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:

OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.




Re: One Core voices

Tyler Spivey
 

It is, if you bothered to look.
Switch to OneCore, press ctrl+NVDA+v and select Rate boost.

On 10/30/2019 6:51 PM, molly the blind tech lover wrote:
oh... i thought it was also for one-core. my apologies.
On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@... <mailto:marrie12@...>> wrote:
__
That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.
Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com> This is also our libsyn page as well.
to subscribe to the feed click here <http://feeds.feedburner.com/tffp>
Our telegram <https://t.me/tffppodcast> channel is also a good place
for an announce only in regard to podcasts, contests, etc.
Our discord <https://discord.gg/fr7MaVK> is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.
Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>
On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:
hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps ☺️
On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...
<mailto:lmddh50@...>> wrote:
OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.

Re: One Core voices

molly the blind tech lover
 

oh... i thought it was also for one-core. my apologies.


On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@...> wrote:

That is not with all synths. That is I believe for eSpeak only, at leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control plus s it will bring up the synthesizer settings. tab till you year rate boost then check the box. hope this helps ☺️


On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...> wrote:
OK I understand, I think, that you can not change the rate of the one
core voices under the speech settings of NVDA.  Under the one core
voices listed is Paul.  When I go to the Windows 10 speech settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.




Re: One Core voices

Sarah k Alawami
 

That is not with all synths. That is I believe for eSpeak only, at leastiwht my experience.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:

hi.
you could try the rate boost. if you press nvda plus control plus s it will bring up the synthesizer settings. tab till you year rate boost then check the box. hope this helps ☺️


On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...> wrote:
OK I understand, I think, that you can not change the rate of the one
core voices under the speech settings of NVDA.  Under the one core
voices listed is Paul.  When I go to the Windows 10 speech settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.




Re: One Core voices

molly the blind tech lover
 

hi.
you could try the rate boost. if you press nvda plus control plus s it will bring up the synthesizer settings. tab till you year rate boost then check the box. hope this helps ☺️


On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@...> wrote:
OK I understand, I think, that you can not change the rate of the one
core voices under the speech settings of NVDA.  Under the one core
voices listed is Paul.  When I go to the Windows 10 speech settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.




One Core voices

Don H
 

OK I understand, I think, that you can not change the rate of the one core voices under the speech settings of NVDA. Under the one core voices listed is Paul. When I go to the Windows 10 speech settings there is no Paul listed. So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.

Re: StationPlaylist and Windows 10 App Essentials 19.11 #addonrelease

 

Hi,

Hmmm, that I don’t know – I need a log to figure out what’s going on.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gary Metzler
Sent: Wednesday, October 30, 2019 5:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] StationPlaylist and Windows 10 App Essentials 19.11 #AddonRelease

 

Hi Joseph,

 

When I try to install windows app essentials  I get a not compatible with this version of windows error.  I am running nvda February 1 and windows 1903 449. What is going wrong?

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Wednesday, October 30, 2019 11:03 AM
To: nvda@nvda.groups.io
Subject: [nvda] StationPlaylist and Windows 10 App Essentials 19.11 #AddonRelease

 

Hi all,

 

Version 19.11 of StationPlaylist and Windows 10 App Essentials (and in case of the latter, October 30th snapshot) are now available. StationPlaylist update brings changes to encoder status command (SPL Controller, E), and Windows 10 App Essentials brings significant changes requiring NVDA 2019.2.1.

 

IMPORTANT: if you are using Windows 10 App Essentials, add-on 19.11 requires NVDA 2019.2.1 or later. This is done to reduce code size and to serve as a stepping stone for a future release that will absolutely require upcoming NVDA 2019.3.

 

Cheers,

Joseph