oh... i thought it was also for one-core. my apologies.
On Wed, Oct 30, 2019, 9:47 PM Sarah k Alawami <marrie12@gmail.com <mailto:marrie12@gmail.com>> wrote:
__
That is not with all synths. That is I believe for eSpeak only, at
leastiwht my experience.
Sarah Alawami, owner of TFFP. . For more info go to our website.
<http://www.tffppodcast.com>; This is also our libsyn page as well.
to subscribe to the feed click here <http://feeds.feedburner.com/tffp>;
Our telegram <https://t.me/tffppodcast>; channel is also a good place
for an announce only in regard to podcasts, contests, etc.
Our discord <https://discord.gg/fr7MaVK>; is where you will know when
we go live on youtube, twitch and mixer. Thanks Restream staff.
Finally, to become a patron and help support the podcast go here
<Http://patreon.com/tffppodcast>
On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:
hi.
you could try the rate boost. if you press nvda plus control
plus s it will bring up the synthesizer settings. tab till you
year rate boost then check the box. hope this helps ☺️
On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@adams.net
<mailto:lmddh50@adams.net>> wrote:
OK I understand, I think, that you can not change the rate
of the one
core voices under the speech settings of NVDA.  Under the
one core
voices listed is Paul.  When I go to the Windows 10 speech
settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.

That is not with all synths. That is I believe for eSpeak only, at leastiwht my experience.
Sarah Alawami, owner of TFFP. . For more info go to our website. <http://www.tffppodcast.com>; This is also our libsyn page as well.
to subscribe to the feed click here <http://feeds.feedburner.com/tffp>;
Our telegram <https://t.me/tffppodcast>; channel is also a good place for an announce only in regard to podcasts, contests, etc.
Our discord <https://discord.gg/fr7MaVK>; is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.
Finally, to become a patron and help support the podcast go here <Http://patreon.com/tffppodcast>
On 30 Oct 2019, at 18:40, molly the blind tech lover wrote:
hi.
you could try the rate boost. if you press nvda plus control plus s
it will bring up the synthesizer settings. tab till you year rate
boost then check the box. hope this helps ☺️
On Wed, Oct 30, 2019, 9:35 PM Don H <lmddh50@adams.net
<mailto:lmddh50@adams.net>> wrote:
OK I understand, I think, that you can not change the rate of
the one
core voices under the speech settings of NVDA.  Under the one core
voices listed is Paul.  When I go to the Windows 10 speech settings
there is no Paul listed.  So how do I change the rate for Paul?
Running win 10 1903 and latest released version of NVDA.
Thanks for any help.

Hazel is British.

H no, What does Hazel sound like? Is she in the NVDA voices? Or do you have to get her yourself?

Sent from Mail for Windows 10

Some voices cannot be used due to their lack of support for sapi 5. Hazel can be used but mark cannot for example. You would probably need to take this up with Microsoft in regard to this.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 31 Oct 2019, at 12:01, Don H wrote:

Running Win 10 1903 and latst released NVDA.
TTrying to add more one core voices.
So far what I have done is go to windows settings then time and language then speech. I wend to add a voice and selected English Canda. I now have English Canada, English British and English United States shown as my voice options. However when I go to NVDA settings under speech One core voices I think I only have English United states voices. What step am I mkissing?

I’m getting a new hard drive for my computer. I’m planning to create a portable copy of NVDA in case the software can’t be transferred to the new drive from the old. I understand that when I do this, all settings are saved but what about add-ons? Do I need to copy those files separately, then install them after installing the portable copy on my new hard drive? Thanks in advance for any answers.
\Abbie Johnson Taylor, Author _https://abbiescorner.wordpress.com_
http://www.abbiejohnsontaylor.com
abbietaylor945@gmail.com
--
Abbie Johnson Taylor, Author
http://www.abbiejohnsontaylor.com
http://abbiescorner.wordpress.com
abbietaylor945@gmail.com

H no, What does Hazel sound like? Is she in the NVDA voices? Or do you have to get her yourself?

Sent from Mail for Windows 10

Some voices cannot be used due to their lack of support for sapi 5. Hazel can be used but mark cannot for example. You would probably need to take this up with Microsoft in regard to this.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 31 Oct 2019, at 12:01, Don H wrote:

Running Win 10 1903 and latst released NVDA.
TTrying to add more one core voices.
So far what I have done is go to windows settings then time and language then speech. I wend to add a voice and selected English Canda. I now have English Canada, English British and English United States shown as my voice options. However when I go to NVDA settings under speech One core voices I think I only have English United states voices. What step am I mkissing?

Did not help to restart NVDA

On 10/31/2019 2:14 PM, Chris via Groups.Io wrote:

> Restart nvda

>

> *From: *Don H <mailto:lmddh50@...>

> *Sent: *31 October 2019 19:02

> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject: *[nvda] Microsoft one core voices

>

> Running Win 10 1903 and latst released NVDA.

>

> TTrying to add more one core voices.

>

> So far what I have done is go to windows settings then time and language

>

> then speech.  I wend to add a voice and selected English Canda.  I now

>

> have English Canada, English British and English United States shown as

>

> my voice options.  However when I go to NVDA settings under speech One

>

> core voices I think I only have English United states voices.  What step

>

> am I mkissing?

>

>

Some voices cannot be used due to their lack of support for sapi 5. Hazel can be used but mark cannot for example. You would probably need to take this up with Microsoft in regard to this.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 31 Oct 2019, at 12:01, Don H wrote:

Running Win 10 1903 and latst released NVDA.
TTrying to add more one core voices.
So far what I have done is go to windows settings then time and language then speech. I wend to add a voice and selected English Canda. I now have English Canada, English British and English United States shown as my voice options. However when I go to NVDA settings under speech One core voices I think I only have English United states voices. What step am I mkissing?

In the NVDA speech settings under One Core Voices I have the following voices available.
Paul, Betty, Harry, Frank, Dennis, Kit, Ursula, Rita and  Wendy.
I think I have both the English United Kindgom and English United States installed.  Is this all the voices I should have?
Thanks

Restart nvda
*From: *Don H <mailto:lmddh50@adams.net>
*Sent: *31 October 2019 19:02
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *[nvda] Microsoft one core voices
Running Win 10 1903 and latst released NVDA.
TTrying to add more one core voices.
So far what I have done is go to windows settings then time and language
then speech.  I wend to add a voice and selected English Canda.  I now
have English Canada, English British and English United States shown as
my voice options.  However when I go to NVDA settings under speech One
core voices I think I only have English United states voices.  What step
am I mkissing?

Running Win 10 1903 and latst released NVDA.
TTrying to add more one core voices.
So far what I have done is go to windows settings then time and language then speech. I wend to add a voice and selected English Canda. I now have English Canada, English British and English United States shown as my voice options. However when I go to NVDA settings under speech One core voices I think I only have English United states voices. What step am I mkissing?

Running Win 10 1903 and latst released NVDA.

TTrying to add more one core voices.

So far what I have done is go to windows settings then time and language

then speech.  I wend to add a voice and selected English Canda.  I now

have English Canada, English British and English United States shown as

my voice options.  However when I go to NVDA settings under speech One

core voices I think I only have English United states voices.  What step

am I mkissing?

I am using it. It seems to work fine here.

It seems to no longer work. Does any one know of an alternative that will work with NVDA?

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

I think there's a way to install and uninstall OCR languages in
Windows, but a (really very quick) search in the settings app didn't
yield anything.

When you go to the "Windows 10 OCR" category in NVDA's settings, is
English there?

On 31/10/2019 15:00, John Isige wrote:

This is Windows 10 built-in OCR, not the addon.


On 10/30/2019 17:16, hurrikennyandopo ... wrote:

Hi again


Is it the one with windows 10 or the add on? if it is the second one
then you had to use the text review cursor on the numeric keypad to
read what had been ocred.


Gene nz


On 31/10/2019 8:08 AM, John Isige wrote:

Thanks, I've heard of that and it's good to know it works. But I'm
using
Firefox, not Chrome, and I'd really like to figure out why NVDA's??
OCR
isn't doing what it's supposed to. I wonder if it's even working,
because I tried running it in an app the other day and got nothing out
of it. I assumed it was just something it couldn't recognize, but
now I
wonder if it's just not really doing anything.


On 10/30/2019 13:23, hurrikennyandopo ... wrote:

Hi


This may not help or it could.


if you are using the google browser while on any page hit the
applications key then arrow down to get image description from
google.
It will then give you 2 options once only or always.


I leave mine on always?? It will do your whole page if there is no
description on any of the images etc. If left on will do it for all
your pages.


There is a message that comes up after you pick always just agree to
it and you are right to go.


It can always be turned off the same way but pick once.


There is a tutorial and audio one so you can hear what it does on my
nvda tutorials for other programs page.


Just look for get image describer from google in the list.


Gene nz


On 31/10/2019 6:26 AM, John Isige wrote:

If I'm using the post itself, I arrow to the part that says
"image may
contain". If I open the link, I arrow until I'm in the middle of the
stuff that says "graphic" and some URL gibberish. I'm pretty sure
the
images are displayed in my feed because I think I've had my wife
look at
some, but I can get her to check tonight.


On 10/30/2019 0:25, Sascha Cowley via Groups.Io wrote:

Hi there,

I haven't experienced the problem you're having, and when I
navigate
to that link and run OCR I get correct output.

In terms of why just running OCR on the original link to the image
doesn't work, it may be that the image isn't being displayed. I use
mobile Facebook in Firefox, too, and can visually confirm that, for
me, images aren't loaded in newsfeed, but I can't remember if I
had to
change a setting for it to be that way.

When you say you highlight the image, what do you mean? I can
literally just open the link and run OCR, since it is just an
image.


Regards,

Sascha

On 30/10/2019 16:05, John Isige wrote:

Hi all. I might have asked about this before, but if there was an
answer, I don't remember it. I'm using NVDA 2019.2.1, Windows 1903
64-bit with the latest updates, Firefox 70.0 64-bit. I'm going to
m.facebook.com. As the subject says, OCR doesn't work for me on
Facebook. Here's a post, as it appears to me. I apologize for the
potentially political content, it's literally the first post
with a
meme/picture that showed up in my scroll.


"Fun fact - data works.
Pro-Choice win. Pro-Life win. Teen win. State win. Taxpayer win.
So. Much. Winning.
CrabDiving Podcast
Truth bomb
Image may contain: 1 person, text"


If I highlight the image, i.e. the line that says "image may
contain", and hit NVDA-r, it says it's doing OCR, and I get a
blank
window, in other words, nothing has been recognized. If I click on
that link, and then click on the "view full size" link that comes
up,
and maximize the window, and do OCR after making sure I'm
highlighting part of the image, I get nothing. However, if I
*save*
the image and run KNFB Reader on it, I get this.


"Ally Maynard @missmayn In 2009, Colorado began offering teens
free
IUDs without parental consent. Within 8 years teen pregnancies
dropped 54%. Teen abortion rates fell by 64%. For every $1
spent on
the program the state saved $5.85 in labor and delivery costs,
child-care assistance and food stamps. There is a reasonable and
logical way to lower abortions. 97.940 notes"


Am I doing something wrong? If not, any ideas why this isn't
working?
I'm using Windows 10 OCR, I uninstalled the OCR addon when 10's
OCR
happened but just in case I checked, and it's definitely not
installed. I see a *lot* of stuff like this from people, memes
with
text that is, and it's getting really annoying. At least if I can
find out what it's about, I can be annoyed by the actual
content or
block them or make fun of them or such, as the occasion
demands. In
case it's helpful, here's the giant link to the image, it spans
multiple lines.


https://scontent-ort2-2.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/74351464_2244231525681008_7493424837126258688_n.jpg?_nc_cat=1&;efg=eyJpIjoiYiJ9&_nc_oc=AQk1EhxXkOMSYw-gGSB9IWjhw5wu5TE01qUv7AqzBZFBUsDNjeZbE8cfEC98kFttaUE&_nc_ht=scontent-ort2-2.xx&oh=94b846952425ed0317bc7b4cd7630cda&oe=5E5E379D

--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the
NVDA screen reader on them and there library locations please go to
http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following
link https://certification.nvaccess.org/
<https://certification.nvaccess.org/>;. The certification page
contains
the official list of NVDA certified individuals from around the
world,
who have sat and successfully passed the NVDA expert exam.

--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the
NVDA screen reader on them and there library locations please go to
http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following
link https://certification.nvaccess.org/
<https://certification.nvaccess.org/>;. The certification page contains
the official list of NVDA certified individuals from around the world,
who have sat and successfully passed the NVDA expert exam.

This is Windows 10 built-in OCR, not the addon.


On 10/30/2019 17:16, hurrikennyandopo ... wrote:

Hi again


Is it the one with windows 10 or the add on? if it is the second one
then you had to use the text review cursor on the numeric keypad to
read what had been ocred.


Gene nz


On 31/10/2019 8:08 AM, John Isige wrote:

Thanks, I've heard of that and it's good to know it works. But I'm using
Firefox, not Chrome, and I'd really like to figure out why NVDA's?? OCR
isn't doing what it's supposed to. I wonder if it's even working,
because I tried running it in an app the other day and got nothing out
of it. I assumed it was just something it couldn't recognize, but now I
wonder if it's just not really doing anything.


On 10/30/2019 13:23, hurrikennyandopo ... wrote:

Hi


This may not help or it could.


if you are using the google browser while on any page hit the
applications key then arrow down to get image description from google.
It will then give you 2 options once only or always.


I leave mine on always?? It will do your whole page if there is no
description on any of the images etc. If left on will do it for all
your pages.


There is a message that comes up after you pick always just agree to
it and you are right to go.


It can always be turned off the same way but pick once.


There is a tutorial and audio one so you can hear what it does on my
nvda tutorials for other programs page.


Just look for get image describer from google in the list.


Gene nz


On 31/10/2019 6:26 AM, John Isige wrote:

If I'm using the post itself, I arrow to the part that says "image may
contain". If I open the link, I arrow until I'm in the middle of the
stuff that says "graphic" and some URL gibberish. I'm pretty sure the
images are displayed in my feed because I think I've had my wife
look at
some, but I can get her to check tonight.


On 10/30/2019 0:25, Sascha Cowley via Groups.Io wrote:

Hi there,

I haven't experienced the problem you're having, and when I navigate
to that link and run OCR I get correct output.

In terms of why just running OCR on the original link to the image
doesn't work, it may be that the image isn't being displayed. I use
mobile Facebook in Firefox, too, and can visually confirm that, for
me, images aren't loaded in newsfeed, but I can't remember if I
had to
change a setting for it to be that way.

When you say you highlight the image, what do you mean? I can
literally just open the link and run OCR, since it is just an image.


Regards,

Sascha

On 30/10/2019 16:05, John Isige wrote:

Hi all. I might have asked about this before, but if there was an
answer, I don't remember it. I'm using NVDA 2019.2.1, Windows 1903
64-bit with the latest updates, Firefox 70.0 64-bit. I'm going to
m.facebook.com. As the subject says, OCR doesn't work for me on
Facebook. Here's a post, as it appears to me. I apologize for the
potentially political content, it's literally the first post with a
meme/picture that showed up in my scroll.


"Fun fact - data works.
Pro-Choice win. Pro-Life win. Teen win. State win. Taxpayer win.
So. Much. Winning.
CrabDiving Podcast
Truth bomb
Image may contain: 1 person, text"


If I highlight the image, i.e. the line that says "image may
contain", and hit NVDA-r, it says it's doing OCR, and I get a blank
window, in other words, nothing has been recognized. If I click on
that link, and then click on the "view full size" link that comes
up,
and maximize the window, and do OCR after making sure I'm
highlighting part of the image, I get nothing. However, if I *save*
the image and run KNFB Reader on it, I get this.


"Ally Maynard @missmayn In 2009, Colorado began offering teens free
IUDs without parental consent. Within 8 years teen pregnancies
dropped 54%. Teen abortion rates fell by 64%. For every $1 spent on
the program the state saved $5.85 in labor and delivery costs,
child-care assistance and food stamps. There is a reasonable and
logical way to lower abortions. 97.940 notes"


Am I doing something wrong? If not, any ideas why this isn't
working?
I'm using Windows 10 OCR, I uninstalled the OCR addon when 10's OCR
happened but just in case I checked, and it's definitely not
installed. I see a *lot* of stuff like this from people, memes with
text that is, and it's getting really annoying. At least if I can
find out what it's about, I can be annoyed by the actual content or
block them or make fun of them or such, as the occasion demands. In
case it's helpful, here's the giant link to the image, it spans
multiple lines.


https://scontent-ort2-2.xx.fbcdn.net/v/t1.0-9/fr/cp0/e15/q65/74351464_2244231525681008_7493424837126258688_n.jpg?_nc_cat=1&;efg=eyJpIjoiYiJ9&_nc_oc=AQk1EhxXkOMSYw-gGSB9IWjhw5wu5TE01qUv7AqzBZFBUsDNjeZbE8cfEC98kFttaUE&_nc_ht=scontent-ort2-2.xx&oh=94b846952425ed0317bc7b4cd7630cda&oe=5E5E379D

--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the
NVDA screen reader on them and there library locations please go to
http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following
link https://certification.nvaccess.org/
<https://certification.nvaccess.org/>;. The certification page contains
the official list of NVDA certified individuals from around the world,
who have sat and successfully passed the NVDA expert exam.

--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the
NVDA screen reader on them and there library locations please go to
http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following
link https://certification.nvaccess.org/
<https://certification.nvaccess.org/>;. The certification page contains
the official list of NVDA certified individuals from around the world,
who have sat and successfully passed the NVDA expert exam.