Date   

Re: Time to make a portable etc

hurrikennyandopo ...
 

Hi


usually some of the drives USB ones and sticks are pretty quick. I ended up shutting down the computer after 20 or so minute It was a 16 gig stick formatted correctly.


Yet another stick may be very quick in less than a minute.


I do think in cases like this one I wonder if a cancel button could be put in or do you just grin and bare it until it is done? how ever long it takes.



Gene nz


On 5/01/2020 5:04 pm, Gene wrote:
Thumb drives are a great deal slower than hard drives.  I always do such things on the hard drive, then copy or move the program wherever I want. 
 
Gene
----- Original Message -----
Sent: Saturday, January 04, 2020 5:27 PM
Subject: [nvda] Time to make a portable etc

Hi guys


I am in the process of making a portable version of nvda that I am
putting onto a usb stick. I downloaded nvda 2019.2.1 then clicked on it
to make the portable version as usual


Has any one on the list when they have gone to do this have it take 5 or
10 minutes or longer? I thought it might of been this 16 gig stick been
slow and the message still is not telling me it has been done.


But I was also thinking because you can not close the screen etc until
it is done could maybe a cancel button be put into it if it takes this
period of time to cancel the process.


It might of been quicker to make it on the hard drive then copy it across.

I can not stop the process unless i shut down the pc.


Thoughts


Gene nz





Re: Time to make a portable etc

Gene
 

Thumb drives are a great deal slower than hard drives.  I always do such things on the hard drive, then copy or move the program wherever I want. 
 
Gene
----- Original Message -----

Sent: Saturday, January 04, 2020 5:27 PM
Subject: [nvda] Time to make a portable etc

Hi guys


I am in the process of making a portable version of nvda that I am
putting onto a usb stick. I downloaded nvda 2019.2.1 then clicked on it
to make the portable version as usual


Has any one on the list when they have gone to do this have it take 5 or
10 minutes or longer? I thought it might of been this 16 gig stick been
slow and the message still is not telling me it has been done.


But I was also thinking because you can not close the screen etc until
it is done could maybe a cancel button be put into it if it takes this
period of time to cancel the process.


It might of been quicker to make it on the hard drive then copy it across.

I can not stop the process unless i shut down the pc.


Thoughts


Gene nz





Re: Time to make a portable etc

molly the blind tech lover
 

Yep, takes about five minutes. NVDA will beep and let you know it successfully created the portable copy.  😎

 

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of hurrikennyandopo ...
Sent: Saturday, January 4, 2020 6:27 PM
To: nvda@groups.io
Subject: [nvda] Time to make a portable etc

 

Hi guys

 

 

I am in the process of making a portable version of nvda that I am putting onto a usb stick. I downloaded nvda 2019.2.1 then clicked on it to make the portable version as usual

 

 

Has any one on the list when they have gone to do this have it take 5 or

10 minutes or longer? I thought it might of been this 16 gig stick been slow and the message still is not telling me it has been done.

 

 

But I was also thinking because you can not close the screen etc until it is done could maybe a cancel button be put into it if it takes this period of time to cancel the process.

 

 

It might of been quicker to make it on the hard drive then copy it across.

 

I can not stop the process unless i shut down the pc.

 

 

Thoughts

 

 

Gene nz

 

 

 

 


Password agent

Marten Post Uiterweer
 

Hi,

I am using a password manager called Password agent version 2.6.3.
Nvda will not read tekst in the listview in this program, so it is
useless with Nvda.

I am also using Jaws and Jaws will read this list so I still can use
this program. Reclassing the window is not necesary with jaws.

Is there a possibility Nvda can be used? A specific setting in Nvcda?
Reclassing windows is not possible for as far as I know.

Marten


Time to make a portable etc

hurrikennyandopo ...
 

Hi guys


I am in the process of making a portable version of nvda that I am putting onto a usb stick. I downloaded nvda 2019.2.1 then clicked on it to make the portable version as usual


Has any one on the list when they have gone to do this have it take 5 or 10 minutes or longer? I thought it might of been this 16 gig stick been slow and the message still is not telling me it has been done.


But I was also thinking because you can not close the screen etc until it is done could maybe a cancel button be put into it if it takes this period of time to cancel the process.


It might of been quicker to make it on the hard drive then copy it across.

I can not stop the process unless i shut down the pc.


Thoughts


Gene nz


Re: flight tracker

Kerryn Gunness <k_gunness@...>
 

thanks
 

----- Original Message -----
Sent: Saturday, January 4, 2020 12:27 PM
Subject: Re: [nvda] flight tracker

No, but you can go to flight aware's website, I think it's flightaware.com and track officially flied flight plans and cruse altitudes and routs sans sids and stars that way. Is this what you wanted? You can even fly those routs if you want to as well.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 4 Jan 2020, at 5:48, Kerryn Gunness via Groups.Io wrote:

hi all
does NVDA have a flight tracking add on or feature?
thanks


Re: nvda addon update and the automatic update settings

molly the blind tech lover
 

Hi.

Good to know 😉 I installed the update then restarted NVDA and turned off the automatic checking of add-on updates, saving the configuration after.

 

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Saturday, January 4, 2020 4:07 PM
To: nvda@nvda.groups.io
Subject: [nvda] nvda addon update and the automatic update settings

 

Hi all.

 

On updating to the latest addon update I noticed that the updator did not remember my disabling of automatic updates settings and reset it to defaults on nvda 2019.2.1 so if you disabled autoupdate you will have to do so again.

 

 

 

 


groups.io error I think

Brian Tew
 

I sent an email to nvda@nvda.groups.io.
I typed in the full address; did not use the reply function.
however the email bounced back from the digest-no-reply address.


nvda addon update and the automatic update settings

 

Hi all.

On updating to the latest addon update I noticed that the updator did not remember my disabling of automatic updates settings and reset it to defaults on nvda 2019.2.1 so if you disabled autoupdate you will have to do so again.


Re: Re-initializing Braille

Brian Tew
 

save your configuration and restore it when you come back.


latest NVDA?

ken lawrence
 

Hi list my add on updater just tried to update and can’t am still using 19.2 any word on when the next NVDA is out?  I did listen to the blind bargain podcast and it did say that the new NVDA was going to be in beta longer than usual.  Also is that why my winamp add on didn’t work right?  I did mention it on my radio show because there is a chat on out of sight for the programming language NVDA uses.  Blind bargains says that NVDA will be moving to python version 3 and they are saying lots of new features.  When that is ready I’ll just go and update the add ons manually.  I’ll have to post it to our station chat list.  So any word on when 2019.3 NVDA hits? 

Sent from Mail for Windows 10

 


Re: is it just me and my roommate

Gene
 

You can't generalize from one experience.  I tried the beta and, while I didn't use read to end much, I had no problem with the small amount I had read.  If you specify what problem you had, it might help the developers look into it but since I've not seen any complaints about it until now, and the beta has been out for perhaps two weeks, perhaps more, this may be a problem with your system and may not be a general one.
 
Gene

----- Original Message -----
From: Carlos
Sent: Saturday, January 04, 2020 12:09 PM
Subject: Re: [nvda] is it just me and my roommate

Hello All:

     I had to go back to NVDA 2019.2 from NVDA 2019.3 because it was not
working well with read all on any program either email, web browser, or
any other program that uses say all to read documents!

     In NVDA 2019.2 it all works well!

     NVDA 2019.3 sure needs a whole lot of work before it is ready for
prime time!


On 1/4/2020 9:17 AM, Governor staten wrote:
> This refers to the way browsers, particularly Firefox and Microsoft
> Edge Dev are acting with NVDA. The virtual buffer/s don't seem to be
> properly refreshing. I wish I had absolute steps to reproduce. Has
> anyone seen anything like this? Let me know.
>
>
>
>
--
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2




Add-on Updater 20.01.1 #addonrelease

 

Hi all,

 

First, apologies for compatibility issues many of you have experienced with recent releases from me. As a result, I’m delaying release wave 4 (Control Usage Assistant, Enhanced Touch Gestures, GoldWave, Object Location Tones) until NVDA 2019.3 release candidate is released (originally scheduled for January 6th).

 

Add-on Updater 20.01.1 is on its way. This release rectifies shortcomings discovered in 20.01 by:

 

  1. Mentioning steps to pause add-on updates: if you are using NVDA 2019.2.1 or earlier, an additional text has been added to the message you get after installing this add-on, telling you how you can pause automatic add-on update checks for now (until 2019.3 is released).
  2. Release context matters: because NVDA 2019.3 is in beta testing phase, message text shown for 2019.2.1 users will reflect whether or not 2019.3 stable version is available or not.
  3. Focus on the message: the first time you restart NVDA after installing this add-on, automatic add-on update check will be paused. This is to ensure that you focus on the message, understand it, and take necessary steps. Automatic add-on update check will resume after restarting NVDA a second time provided that you didn’t pause automatic add-on update check facility. Manual add-on update check will still function.

 

Originally I was going to partially revert recent update releases, but decided against that because:

 

  1. It will break features in one or more add-ons (this affects StationPlaylist users the most).
  2. It will lead to further confusion, especially for people using NVDA 2019.3 alpha/beta where an “upgrade” is really a downgrade.

 

Thanks.

Cheers,

Joseph


Styles toolbar placement?

 

I'm working through the NV Access Microsoft word training book. I've found, for various reasons, that working with different styles is far easier than initially thought. But, the keyboard command to open the styles toolbar is extremely awkward. I tried to add the toolbar to my quick access toolbar, but there are so many, style, commands not in the ribbon, I can't figure out which is the styles toolbar. Does anyone know which one it is?

I mainly use the styles toolbar to select all text of a certain style. Is there a way to add that command to the quick access toolbar? I could create a macro to do this all for me, but that's way too many steps and the VBA isn't accessible with NVDA.


Re: Controla

Brice Mijares
 

Yes, I uninstalled it. Thanks.

On 1/4/2020 10:08 AM, Gene wrote:
If one of the add-ons you can no longer use is Clipspeak, that is the reason.  Control z will no longer say undo either.
Gene
----- Original Message -----
*From:* Brice Mijares <mailto:bricemijares@att.net>
*Sent:* Saturday, January 04, 2020 9:17 AM
*To:* nvda <mailto:nvda@nvda.groups.io>
*Subject:* [nvda] Controla
Using NVDA beta.
When using control a to select all, NVDA says selected only. I had two
ad ons that were obsolete and had to be removed.  Could one of these
removed ad ons be the reason I'm no longer hearing select all?
Windows version: Windows 10Ver1909 (64-bit) build 18363.535
6
Also, just relized I'm not hearing copied from clipboard either.


Re: Problem with an updating of some addons

 

Hi,
2019.3 is available in beta form at the moment.
Regarding recent updates: incompatibility is intentional - it was planned
for months.
I'll release Add-on Updater 20.01.1 which will advise you to turn off
automatic updates if you are using NVDA 2019.2.1 for now.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Saturday, January 4, 2020 10:21 AM
To: nvda@nvda.groups.io
Subject: [nvda] Problem with an updating of some addons

Hello group,
Today I have found out, that some addons are available. When I wanted to
download the addon Systrai list, Nvda said, that a new version is not
compatible with version of Nvda 2019.2.1.
When I wanted update Nvda 2019.3, I found out, that no update is available.
What can I do for I could have a new version of Nvda?
Is a new version of Nvda stable version?

--
Jarek


Re: nvda 2019.3 addons notice

Gerardo Corripio
 

No wonder day before yesterday, when NVDA started, an update Window came up on the AddOn Updater; when I went into check for updates manually via NVDA+h and A, it insisted that there were no updates available and gave the Close button. So this is why this is happening then for those with NVDA 2019.2.1. thanks for the headsup. I thought maybe I was going crazy!

Gera
Enviado desde mi iPhone SE de Telcel

El 4 ene 2020, a la(s) 11:31 a.m., Shaun Everiss <sm.everiss@gmail.com> escribió:

Hi.

To all of you that are getting invalid updates on addons, right now you should go to nvda/preffs/addonupdate settings.

Uncheck the automatic update checks, hit ok.

Save the settings as usual.

Then close nvda and then open it again.

This will stop the annoying popup asking to update.





Problem with an updating of some addons

Jarek.Krcmar
 

Hello group,
Today I have found out, that some addons are available. When I wanted to download the addon Systrai list, Nvda said, that a new version is not compatible with version of Nvda 2019.2.1.
When I wanted update Nvda 2019.3, I found out, that no update is available.
What can I do for I could have a new version of Nvda?
Is a new version of Nvda stable version?

--
Jarek


Re: is it just me and my roommate

Carlos
 

Hello All:

    I had to go back to NVDA 2019.2 from NVDA 2019.3 because it was not working well with read all on any program either email, web browser, or any other program that uses say all to read documents!

    In NVDA 2019.2 it all works well!

    NVDA 2019.3 sure needs a whole lot of work before it is ready for prime time!

On 1/4/2020 9:17 AM, Governor staten wrote:
This refers to the way browsers, particularly Firefox and Microsoft Edge Dev are acting with NVDA. The virtual buffer/s don't seem to be properly refreshing. I wish I had absolute steps to reproduce. Has anyone seen anything like this? Let me know.


--
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2


Re: Controla

Gene
 

If one of the add-ons you can no longer use is Clipspeak, that is the reason.  Control z will no longer say undo either.
 
Gene

----- Original Message -----
Sent: Saturday, January 04, 2020 9:17 AM
To: nvda
Subject: [nvda] Controla

Using NVDA beta.
When using control a to select all, NVDA says selected only. I had two
ad ons that were obsolete and had to be removed.  Could one of these
removed ad ons be the reason I'm no longer hearing select all?
Windows version: Windows 10Ver1909 (64-bit) build 18363.535
6
Also, just relized I'm not hearing copied from clipboard either.


19561 - 19580 of 87835