From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Josh Kennedy
Sent: Monday, January 6, 2020 8:46 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] First impressions of NVDA 2019.3 beta 1

Hi,
I hope that by the time I get my braille me in February, that NVDA will work with it. 
Josh

Disregard that last post it is now working.

Hi,

I just had a look at the details of this add-on. It sounds very promising, yet I am not quite sure where—i.e., in which application—I can use it. Can this be activated when working in MS Word or any other text-editing program?

Thanks,

Cordelia  

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Andy B.
Sent: Monday, January 06, 2020 4:07 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA add-on Developer toolkit 2020.2 is now available!

Hello,
can you be more specific about these situations? In what application
does this happen, and what are you trying to copy?
Best,
Felix

Am Mo., 6. Jan. 2020 um 08:33 Uhr schrieb Minar Singh
<singhminar@gmail.com>:

hi friends,
I have Asus laptop window 8 Operating System running on my machine
with NVDA 19.2
What i have noticed is, when I select any content and copy, It gets
copy but NVDA says no change.
Where is the problem?
Is this a bug in NVDA?
I will be thankful to you for the help.

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Andy B.
Sent: Monday, January 06, 2020 4:07 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA add-on Developer toolkit 2020.2 is now available!

hi friends,
I have Asus laptop window 8 Operating System running on my machine
with NVDA 19.2 What i have noticed is, when I select any content and
copy, It gets copy but NVDA says no change.
Where is the problem?
Is this a bug in NVDA?
I will be thankful to you for the help.

You already know how to open options.  Once you have done so, turn off browse mode or you won't see the list of categories.  The command to toggle it off and on is NVDA space.
Now shift tab, its closer, until you get to the list.  NVDA says list.
Down arrow to home.  Turn browse mode on again and start tabbing.  If something is unclear, up or down arrowing from where you are may provide explanatory text, I haven't checked carefully enough to be sure.
You will get to a combo box where you select what you want, a blank page, a user determined page, or the Firefox page.
Work with the combo box as usual, open it with alt down arrow and look through it.  Tab after you find what you want and in one or two tabs, you'll see options if you select the user URL.  You will see a combo box that repeats what you have been working with such as user URL but don't worry about that.  I think it’s the same one but again, I didn't check.  I just knew it was irrelevant and I kept tabbing.
You probably know how to do the rest, your problem was probably that you didn't know how to get to the list of categories by going into forms mode.
Gene
----- Original Message -----
*From:* Lisa P Geibel <mailto:lisapgeibel429@gmail.com>
*Sent:* Sunday, January 05, 2020 3:49 AM
*To:* NVDA <mailto:nvda@nvda.groups.io>
*Subject:* [nvda] creating start page with Firefox using NVDA

Hi,

Using the latest version of NVDA and Firefox on a Windows 10 computer
also using the latest build, how do you create a start page in Firefox?
Please be detailed with the instructions as it looks so different than
older versions of FF? Thanks.

--
Lisa P. Geibel
For Mine and Marcus's Christian and Messianic audio show, call 631-403-1002 and press 9997 for that show.
For Marcus's Big Brother breaking news and shows, call the same number above, but press 9998 for that show.
For either show, once you're in, press 1, then 0
If you want to hear previous shows, after dialing the above phone number and choosing which show you want, press 2.
We'd love to hear from anyone about these shows and thank you for listening.
email:
lisapgeibel429@gmail.com <mailto:lisapgeibel429@gmail.com>
Twitter:
LisaLisa429
Facebook:
m.facebook.com/ldporter1
May YHWH bless you all

hi friends,
I have Asus laptop window 8 Operating System running on my machine
with NVDA 19.2
What i have noticed is, when I select any content and copy, It gets
copy but NVDA says no change.
Where is the problem?
Is this a bug in NVDA?
I will be thankful to you for the help.

Hello:
    Yesterday I commented on this issue and one of the moderators decided to shoot me down!
    I was using NVDA 2019.3beta and I had to roll back to NVDA 2019.2.1 for these reasons that others are having with say all on it seems to happen on any program that uses say all command!
    Just remember that moderators pay attention to these posts and if it sounds negative to them you will get a stern talking to like I did!
    Hope that the RC version of NVDA 2019.3 will have these buffering issues fixed?
On 1/5/2020 4:57 AM, Bryan Mckinnish wrote:

Hi.

I upgraded to the nvda 2019.3 beta yesterday, all is going well so far, but I ran into a little problem.

I'm trying to read a document in notepad, and the say all command only seems to read the line that the cursor is on.

Is anyone else experiencing this?

Thanks.

Bryan Mckinnish

I have some mp3 files that I want to burn to a cd.  I have tried using the normal burning method via windows media player but it says it can't burn some of the files and doesn't want to burn any of them.  I thought I had another way using FreemakeVC but it will only convert audio files, it won't burn them to a CD.


Does anyone know of another way that is compatible with NVDA?  Looking at google shows a ton of them but no indication which is NVDA compatible.  Free would be better too. :)



Thanks.



--
Dan Beaver (KA4DAN)
--
Dan Beaver (KA4DAN)

I didn't see anyone shoot you down on the list. If you are referring to my
message, I didn't shoot you down. I asked for more information and I said
that since the beta has been out for two weeks or longer, the proboem may be
specific to your system.
If that is what you are referring to, that isn't shooting anyone down. You
asked for help and I answered telling you what I suspect and asking for more
information.

I didn't say you didn't have a problem, I don't know. I said it may be
specific to your machine.

And I am not a moderator. I was a moderator.

Gene
----- Original Message -----

From: Carlos
Sent: Sunday, January 05, 2020 7:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] say all not working in nvda beta


Hello:

Yesterday I commented on this issue and one of the moderators
decided to shoot me down!

I was using NVDA 2019.3beta and I had to roll back to NVDA 2019.2.1
for these reasons that others are having with say all on it seems to
happen on any program that uses say all command!

Just remember that moderators pay attention to these posts and if
it sounds negative to them you will get a stern talking to like I did!

Hope that the RC version of NVDA 2019.3 will have these buffering
issues fixed?


On 1/5/2020 4:57 AM, Bryan Mckinnish wrote:

Hi.

I upgraded to the nvda 2019.3 beta yesterday, all is going well so
far, but I ran into a little problem.

I'm trying to read a document in notepad, and the say all command only
seems to read the line that the cursor is on.

Is anyone else experiencing this?

Thanks.

Bryan Mckinnish

--
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version
2019.2

I have some mp3 files that I want to burn to a cd.  I have tried using the normal burning method via windows media player but it says it can't burn some of the files and doesn't want to burn any of them.  I thought I had another way using FreemakeVC but it will only convert audio files, it won't burn them to a CD.
Does anyone know of another way that is compatible with NVDA?  Looking at google shows a ton of them but no indication which is NVDA compatible.  Free would be better too. :)
Thanks.
--
Dan Beaver (KA4DAN)
--
Dan Beaver (KA4DAN)